Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
/*-
|
2011-09-02 17:40:39 +00:00
|
|
|
* Copyright (c) 2006, 2011 Robert N. M. Watson
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Support for shared swap-backed anonymous memory objects via
|
|
|
|
* shm_open(2) and shm_unlink(2). While most of the implementation is
|
|
|
|
* here, vm_mmap.c contains mapping logic changes.
|
|
|
|
*
|
|
|
|
* TODO:
|
|
|
|
*
|
2011-09-02 17:40:39 +00:00
|
|
|
* (1) Need to export data to a userland tool via a sysctl. Should ipcs(1)
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
* and ipcrm(1) be expanded or should new tools to manage both POSIX
|
|
|
|
* kernel semaphores and POSIX shared memory be written?
|
|
|
|
*
|
2011-09-02 17:40:39 +00:00
|
|
|
* (2) Add support for this file type to fstat(1).
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
*
|
2011-09-02 17:40:39 +00:00
|
|
|
* (3) Resource limits? Does this need its own resource limits or are the
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
* existing limits in mmap(2) sufficient?
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
2011-06-30 10:56:02 +00:00
|
|
|
#include "opt_capsicum.h"
|
|
|
|
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <sys/param.h>
|
2014-03-16 10:55:57 +00:00
|
|
|
#include <sys/capsicum.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <sys/fcntl.h>
|
|
|
|
#include <sys/file.h>
|
|
|
|
#include <sys/filedesc.h>
|
|
|
|
#include <sys/fnv_hash.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/lock.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/mman.h>
|
|
|
|
#include <sys/mutex.h>
|
2011-08-16 20:07:47 +00:00
|
|
|
#include <sys/priv.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/refcount.h>
|
|
|
|
#include <sys/resourcevar.h>
|
2013-02-20 10:38:34 +00:00
|
|
|
#include <sys/rwlock.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <sys/sysproto.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/sx.h>
|
|
|
|
#include <sys/time.h>
|
|
|
|
#include <sys/vnode.h>
|
2013-08-21 17:45:00 +00:00
|
|
|
#include <sys/unistd.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
|
|
|
#include <security/mac/mac_framework.h>
|
|
|
|
|
|
|
|
#include <vm/vm.h>
|
|
|
|
#include <vm/vm_param.h>
|
|
|
|
#include <vm/pmap.h>
|
2011-12-15 15:17:19 +00:00
|
|
|
#include <vm/vm_extern.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <vm/vm_map.h>
|
2011-12-14 22:22:19 +00:00
|
|
|
#include <vm/vm_kern.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <vm/vm_object.h>
|
|
|
|
#include <vm/vm_page.h>
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
#include <vm/vm_pageout.h>
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#include <vm/vm_pager.h>
|
|
|
|
#include <vm/swap_pager.h>
|
|
|
|
|
|
|
|
struct shm_mapping {
|
|
|
|
char *sm_path;
|
|
|
|
Fnv32_t sm_fnv;
|
|
|
|
struct shmfd *sm_shmfd;
|
|
|
|
LIST_ENTRY(shm_mapping) sm_link;
|
|
|
|
};
|
|
|
|
|
|
|
|
static MALLOC_DEFINE(M_SHMFD, "shmfd", "shared memory file descriptor");
|
|
|
|
static LIST_HEAD(, shm_mapping) *shm_dictionary;
|
|
|
|
static struct sx shm_dict_lock;
|
|
|
|
static struct mtx shm_timestamp_lock;
|
|
|
|
static u_long shm_hash;
|
|
|
|
|
|
|
|
#define SHM_HASH(fnv) (&shm_dictionary[(fnv) & shm_hash])
|
|
|
|
|
|
|
|
static int shm_access(struct shmfd *shmfd, struct ucred *ucred, int flags);
|
|
|
|
static struct shmfd *shm_alloc(struct ucred *ucred, mode_t mode);
|
|
|
|
static void shm_dict_init(void *arg);
|
|
|
|
static void shm_drop(struct shmfd *shmfd);
|
|
|
|
static struct shmfd *shm_hold(struct shmfd *shmfd);
|
|
|
|
static void shm_insert(char *path, Fnv32_t fnv, struct shmfd *shmfd);
|
|
|
|
static struct shmfd *shm_lookup(char *path, Fnv32_t fnv);
|
|
|
|
static int shm_remove(char *path, Fnv32_t fnv, struct ucred *ucred);
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
static int shm_dotruncate(struct shmfd *shmfd, off_t length);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
|
|
|
static fo_rdwr_t shm_read;
|
|
|
|
static fo_rdwr_t shm_write;
|
|
|
|
static fo_truncate_t shm_truncate;
|
|
|
|
static fo_ioctl_t shm_ioctl;
|
|
|
|
static fo_poll_t shm_poll;
|
|
|
|
static fo_kqfilter_t shm_kqfilter;
|
|
|
|
static fo_stat_t shm_stat;
|
|
|
|
static fo_close_t shm_close;
|
2011-08-16 20:07:47 +00:00
|
|
|
static fo_chmod_t shm_chmod;
|
|
|
|
static fo_chown_t shm_chown;
|
2013-08-21 17:45:00 +00:00
|
|
|
static fo_seek_t shm_seek;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
|
|
|
/* File descriptor operations. */
|
|
|
|
static struct fileops shm_ops = {
|
|
|
|
.fo_read = shm_read,
|
|
|
|
.fo_write = shm_write,
|
|
|
|
.fo_truncate = shm_truncate,
|
|
|
|
.fo_ioctl = shm_ioctl,
|
|
|
|
.fo_poll = shm_poll,
|
|
|
|
.fo_kqfilter = shm_kqfilter,
|
|
|
|
.fo_stat = shm_stat,
|
|
|
|
.fo_close = shm_close,
|
2011-08-16 20:07:47 +00:00
|
|
|
.fo_chmod = shm_chmod,
|
|
|
|
.fo_chown = shm_chown,
|
2013-09-11 06:41:15 +00:00
|
|
|
.fo_sendfile = vn_sendfile,
|
2013-08-21 17:45:00 +00:00
|
|
|
.fo_seek = shm_seek,
|
|
|
|
.fo_flags = DFLAG_PASSABLE | DFLAG_SEEKABLE
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
FEATURE(posix_shm, "POSIX shared memory");
|
|
|
|
|
2013-08-21 17:23:24 +00:00
|
|
|
static int
|
|
|
|
uiomove_object_page(vm_object_t obj, size_t len, struct uio *uio)
|
|
|
|
{
|
|
|
|
vm_page_t m;
|
|
|
|
vm_pindex_t idx;
|
|
|
|
size_t tlen;
|
|
|
|
int error, offset, rv;
|
|
|
|
|
|
|
|
idx = OFF_TO_IDX(uio->uio_offset);
|
|
|
|
offset = uio->uio_offset & PAGE_MASK;
|
|
|
|
tlen = MIN(PAGE_SIZE - offset, len);
|
|
|
|
|
|
|
|
VM_OBJECT_WLOCK(obj);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Parallel reads of the page content from disk are prevented
|
|
|
|
* by exclusive busy.
|
|
|
|
*
|
|
|
|
* Although the tmpfs vnode lock is held here, it is
|
|
|
|
* nonetheless safe to sleep waiting for a free page. The
|
|
|
|
* pageout daemon does not need to acquire the tmpfs vnode
|
|
|
|
* lock to page out tobj's pages because tobj is a OBJT_SWAP
|
|
|
|
* type object.
|
|
|
|
*/
|
2013-08-22 07:39:53 +00:00
|
|
|
m = vm_page_grab(obj, idx, VM_ALLOC_NORMAL);
|
2013-08-21 17:23:24 +00:00
|
|
|
if (m->valid != VM_PAGE_BITS_ALL) {
|
|
|
|
if (vm_pager_has_page(obj, idx, NULL, NULL)) {
|
|
|
|
rv = vm_pager_get_pages(obj, &m, 1, 0);
|
|
|
|
m = vm_page_lookup(obj, idx);
|
|
|
|
if (m == NULL) {
|
|
|
|
printf(
|
|
|
|
"uiomove_object: vm_obj %p idx %jd null lookup rv %d\n",
|
|
|
|
obj, idx, rv);
|
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
|
|
|
return (EIO);
|
|
|
|
}
|
|
|
|
if (rv != VM_PAGER_OK) {
|
|
|
|
printf(
|
|
|
|
"uiomove_object: vm_obj %p idx %jd valid %x pager error %d\n",
|
|
|
|
obj, idx, m->valid, rv);
|
|
|
|
vm_page_lock(m);
|
|
|
|
vm_page_free(m);
|
|
|
|
vm_page_unlock(m);
|
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
|
|
|
return (EIO);
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
vm_page_zero_invalid(m, TRUE);
|
|
|
|
}
|
|
|
|
vm_page_xunbusy(m);
|
|
|
|
vm_page_lock(m);
|
|
|
|
vm_page_hold(m);
|
|
|
|
vm_page_unlock(m);
|
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
|
|
|
error = uiomove_fromphys(&m, offset, tlen, uio);
|
|
|
|
if (uio->uio_rw == UIO_WRITE && error == 0) {
|
|
|
|
VM_OBJECT_WLOCK(obj);
|
|
|
|
vm_page_dirty(m);
|
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
|
|
|
}
|
|
|
|
vm_page_lock(m);
|
|
|
|
vm_page_unhold(m);
|
|
|
|
if (m->queue == PQ_NONE) {
|
|
|
|
vm_page_deactivate(m);
|
|
|
|
} else {
|
|
|
|
/* Requeue to maintain LRU ordering. */
|
|
|
|
vm_page_requeue(m);
|
|
|
|
}
|
|
|
|
vm_page_unlock(m);
|
|
|
|
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
uiomove_object(vm_object_t obj, off_t obj_size, struct uio *uio)
|
|
|
|
{
|
|
|
|
ssize_t resid;
|
|
|
|
size_t len;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
error = 0;
|
|
|
|
while ((resid = uio->uio_resid) > 0) {
|
|
|
|
if (obj_size <= uio->uio_offset)
|
|
|
|
break;
|
|
|
|
len = MIN(obj_size - uio->uio_offset, resid);
|
|
|
|
if (len == 0)
|
|
|
|
break;
|
|
|
|
error = uiomove_object_page(obj, len, uio);
|
|
|
|
if (error != 0 || resid == uio->uio_resid)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
2013-08-21 17:45:00 +00:00
|
|
|
static int
|
|
|
|
shm_seek(struct file *fp, off_t offset, int whence, struct thread *td)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
off_t foffset;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
foffset = foffset_lock(fp, 0);
|
|
|
|
error = 0;
|
|
|
|
switch (whence) {
|
|
|
|
case L_INCR:
|
|
|
|
if (foffset < 0 ||
|
|
|
|
(offset > 0 && foffset > OFF_MAX - offset)) {
|
|
|
|
error = EOVERFLOW;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
offset += foffset;
|
|
|
|
break;
|
|
|
|
case L_XTND:
|
|
|
|
if (offset > 0 && shmfd->shm_size > OFF_MAX - offset) {
|
|
|
|
error = EOVERFLOW;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
offset += shmfd->shm_size;
|
|
|
|
break;
|
|
|
|
case L_SET:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
error = EINVAL;
|
|
|
|
}
|
|
|
|
if (error == 0) {
|
|
|
|
if (offset < 0 || offset > shmfd->shm_size)
|
|
|
|
error = EINVAL;
|
|
|
|
else
|
2014-03-16 00:53:40 +00:00
|
|
|
td->td_uretoff.tdu_off = offset;
|
2013-08-21 17:45:00 +00:00
|
|
|
}
|
|
|
|
foffset_unlock(fp, offset, error != 0 ? FOF_NOUPDATE : 0);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
static int
|
|
|
|
shm_read(struct file *fp, struct uio *uio, struct ucred *active_cred,
|
|
|
|
int flags, struct thread *td)
|
|
|
|
{
|
2013-08-21 17:45:00 +00:00
|
|
|
struct shmfd *shmfd;
|
|
|
|
void *rl_cookie;
|
|
|
|
int error;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
2013-08-21 17:45:00 +00:00
|
|
|
shmfd = fp->f_data;
|
|
|
|
foffset_lock_uio(fp, uio, flags);
|
|
|
|
rl_cookie = rangelock_rlock(&shmfd->shm_rl, uio->uio_offset,
|
|
|
|
uio->uio_offset + uio->uio_resid, &shmfd->shm_mtx);
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_read(active_cred, fp->f_cred, shmfd);
|
|
|
|
if (error)
|
|
|
|
return (error);
|
|
|
|
#endif
|
|
|
|
error = uiomove_object(shmfd->shm_object, shmfd->shm_size, uio);
|
|
|
|
rangelock_unlock(&shmfd->shm_rl, rl_cookie, &shmfd->shm_mtx);
|
|
|
|
foffset_unlock_uio(fp, uio, flags);
|
|
|
|
return (error);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_write(struct file *fp, struct uio *uio, struct ucred *active_cred,
|
|
|
|
int flags, struct thread *td)
|
|
|
|
{
|
2013-08-21 17:45:00 +00:00
|
|
|
struct shmfd *shmfd;
|
|
|
|
void *rl_cookie;
|
|
|
|
int error;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
2013-08-21 17:45:00 +00:00
|
|
|
shmfd = fp->f_data;
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_write(active_cred, fp->f_cred, shmfd);
|
|
|
|
if (error)
|
|
|
|
return (error);
|
|
|
|
#endif
|
|
|
|
foffset_lock_uio(fp, uio, flags);
|
|
|
|
if ((flags & FOF_OFFSET) == 0) {
|
|
|
|
rl_cookie = rangelock_wlock(&shmfd->shm_rl, 0, OFF_MAX,
|
|
|
|
&shmfd->shm_mtx);
|
|
|
|
} else {
|
|
|
|
rl_cookie = rangelock_wlock(&shmfd->shm_rl, uio->uio_offset,
|
|
|
|
uio->uio_offset + uio->uio_resid, &shmfd->shm_mtx);
|
|
|
|
}
|
|
|
|
|
|
|
|
error = uiomove_object(shmfd->shm_object, shmfd->shm_size, uio);
|
|
|
|
rangelock_unlock(&shmfd->shm_rl, rl_cookie, &shmfd->shm_mtx);
|
|
|
|
foffset_unlock_uio(fp, uio, flags);
|
|
|
|
return (error);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_truncate(struct file *fp, off_t length, struct ucred *active_cred,
|
|
|
|
struct thread *td)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
#ifdef MAC
|
|
|
|
int error;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_truncate(active_cred, fp->f_cred, shmfd);
|
|
|
|
if (error)
|
|
|
|
return (error);
|
|
|
|
#endif
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
return (shm_dotruncate(shmfd, length));
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_ioctl(struct file *fp, u_long com, void *data,
|
|
|
|
struct ucred *active_cred, struct thread *td)
|
|
|
|
{
|
|
|
|
|
|
|
|
return (EOPNOTSUPP);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_poll(struct file *fp, int events, struct ucred *active_cred,
|
|
|
|
struct thread *td)
|
|
|
|
{
|
|
|
|
|
|
|
|
return (EOPNOTSUPP);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_kqfilter(struct file *fp, struct knote *kn)
|
|
|
|
{
|
|
|
|
|
|
|
|
return (EOPNOTSUPP);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_stat(struct file *fp, struct stat *sb, struct ucred *active_cred,
|
|
|
|
struct thread *td)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
#ifdef MAC
|
|
|
|
int error;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_stat(active_cred, fp->f_cred, shmfd);
|
|
|
|
if (error)
|
|
|
|
return (error);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to return sanish values for fstat() on a memory file
|
|
|
|
* descriptor.
|
|
|
|
*/
|
|
|
|
bzero(sb, sizeof(*sb));
|
|
|
|
sb->st_blksize = PAGE_SIZE;
|
|
|
|
sb->st_size = shmfd->shm_size;
|
|
|
|
sb->st_blocks = (sb->st_size + sb->st_blksize - 1) / sb->st_blksize;
|
2011-08-16 20:07:47 +00:00
|
|
|
mtx_lock(&shm_timestamp_lock);
|
2010-03-28 13:13:22 +00:00
|
|
|
sb->st_atim = shmfd->shm_atime;
|
|
|
|
sb->st_ctim = shmfd->shm_ctime;
|
|
|
|
sb->st_mtim = shmfd->shm_mtime;
|
2011-08-16 20:07:47 +00:00
|
|
|
sb->st_birthtim = shmfd->shm_birthtime;
|
|
|
|
sb->st_mode = S_IFREG | shmfd->shm_mode; /* XXX */
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
sb->st_uid = shmfd->shm_uid;
|
|
|
|
sb->st_gid = shmfd->shm_gid;
|
2011-08-16 20:07:47 +00:00
|
|
|
mtx_unlock(&shm_timestamp_lock);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_close(struct file *fp, struct thread *td)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
fp->f_data = NULL;
|
|
|
|
shm_drop(shmfd);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
static int
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
shm_dotruncate(struct shmfd *shmfd, off_t length)
|
|
|
|
{
|
|
|
|
vm_object_t object;
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
vm_page_t m, ma[1];
|
|
|
|
vm_pindex_t idx, nobjsize;
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
vm_ooffset_t delta;
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
int base, rv;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
|
|
|
object = shmfd->shm_object;
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WLOCK(object);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
if (length == shmfd->shm_size) {
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(object);
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
return (0);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
nobjsize = OFF_TO_IDX(length + PAGE_MASK);
|
|
|
|
|
|
|
|
/* Are we shrinking? If so, trim the end. */
|
|
|
|
if (length < shmfd->shm_size) {
|
2011-12-14 22:22:19 +00:00
|
|
|
/*
|
|
|
|
* Disallow any requests to shrink the size if this
|
|
|
|
* object is mapped into the kernel.
|
|
|
|
*/
|
|
|
|
if (shmfd->shm_kmappings > 0) {
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(object);
|
2011-12-14 22:22:19 +00:00
|
|
|
return (EBUSY);
|
|
|
|
}
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Zero the truncated part of the last page.
|
|
|
|
*/
|
|
|
|
base = length & PAGE_MASK;
|
|
|
|
if (base != 0) {
|
|
|
|
idx = OFF_TO_IDX(length);
|
|
|
|
retry:
|
|
|
|
m = vm_page_lookup(object, idx);
|
|
|
|
if (m != NULL) {
|
2013-08-09 11:11:11 +00:00
|
|
|
if (vm_page_sleep_if_busy(m, "shmtrc"))
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
goto retry;
|
|
|
|
} else if (vm_pager_has_page(object, idx, NULL, NULL)) {
|
|
|
|
m = vm_page_alloc(object, idx, VM_ALLOC_NORMAL);
|
|
|
|
if (m == NULL) {
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(object);
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
VM_WAIT;
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WLOCK(object);
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
goto retry;
|
|
|
|
} else if (m->valid != VM_PAGE_BITS_ALL) {
|
|
|
|
ma[0] = m;
|
|
|
|
rv = vm_pager_get_pages(object, ma, 1,
|
|
|
|
0);
|
|
|
|
m = vm_page_lookup(object, idx);
|
|
|
|
} else
|
|
|
|
/* A cached page was reactivated. */
|
|
|
|
rv = VM_PAGER_OK;
|
|
|
|
vm_page_lock(m);
|
|
|
|
if (rv == VM_PAGER_OK) {
|
|
|
|
vm_page_deactivate(m);
|
|
|
|
vm_page_unlock(m);
|
2013-08-09 11:11:11 +00:00
|
|
|
vm_page_xunbusy(m);
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
} else {
|
|
|
|
vm_page_free(m);
|
|
|
|
vm_page_unlock(m);
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(object);
|
Correct an error of omission in the implementation of the truncation
operation on POSIX shared memory objects and tmpfs. Previously, neither of
these modules correctly handled the case in which the new size of the object
or file was not a multiple of the page size. Specifically, they did not
handle partial page truncation of data stored on swap. As a result, stale
data might later be returned to an application.
Interestingly, a data inconsistency was less likely to occur under tmpfs
than POSIX shared memory objects. The reason being that a different mistake
by the tmpfs truncation operation helped avoid a data inconsistency. If the
data was still resident in memory in a PG_CACHED page, then the tmpfs
truncation operation would reactivate that page, zero the truncated portion,
and leave the page pinned in memory. More precisely, the benevolent error
was that the truncation operation didn't add the reactivated page to any of
the paging queues, effectively pinning the page. This page would remain
pinned until the file was destroyed or the page was read or written. With
this change, the page is now added to the inactive queue.
Discussed with: jhb
Reviewed by: kib (an earlier version)
MFC after: 3 weeks
2012-01-08 20:09:26 +00:00
|
|
|
return (EIO);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (m != NULL) {
|
|
|
|
pmap_zero_page_area(m, base, PAGE_SIZE - base);
|
|
|
|
KASSERT(m->valid == VM_PAGE_BITS_ALL,
|
|
|
|
("shm_dotruncate: page %p is invalid", m));
|
|
|
|
vm_page_dirty(m);
|
|
|
|
vm_pager_page_unswapped(m);
|
|
|
|
}
|
|
|
|
}
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
delta = ptoa(object->size - nobjsize);
|
|
|
|
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
/* Toss in memory pages. */
|
|
|
|
if (nobjsize < object->size)
|
|
|
|
vm_object_page_remove(object, nobjsize, object->size,
|
2011-06-29 16:40:41 +00:00
|
|
|
0);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
|
|
|
/* Toss pages from swap. */
|
|
|
|
if (object->type == OBJT_SWAP)
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
swap_pager_freespace(object, nobjsize, delta);
|
|
|
|
|
|
|
|
/* Free the swap accounted for shm */
|
2010-12-02 17:37:16 +00:00
|
|
|
swap_release_by_cred(delta, object->cred);
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
object->charge -= delta;
|
|
|
|
} else {
|
|
|
|
/* Attempt to reserve the swap */
|
|
|
|
delta = ptoa(nobjsize - object->size);
|
2010-12-02 17:37:16 +00:00
|
|
|
if (!swap_reserve_by_cred(delta, object->cred)) {
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(object);
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
object->charge += delta;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
shmfd->shm_size = length;
|
|
|
|
mtx_lock(&shm_timestamp_lock);
|
|
|
|
vfs_timestamp(&shmfd->shm_ctime);
|
|
|
|
shmfd->shm_mtime = shmfd->shm_ctime;
|
|
|
|
mtx_unlock(&shm_timestamp_lock);
|
|
|
|
object->size = nobjsize;
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(object);
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
return (0);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* shmfd object management including creation and reference counting
|
|
|
|
* routines.
|
|
|
|
*/
|
|
|
|
static struct shmfd *
|
|
|
|
shm_alloc(struct ucred *ucred, mode_t mode)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
|
|
|
|
shmfd = malloc(sizeof(*shmfd), M_SHMFD, M_WAITOK | M_ZERO);
|
|
|
|
shmfd->shm_size = 0;
|
|
|
|
shmfd->shm_uid = ucred->cr_uid;
|
|
|
|
shmfd->shm_gid = ucred->cr_gid;
|
|
|
|
shmfd->shm_mode = mode;
|
|
|
|
shmfd->shm_object = vm_pager_allocate(OBJT_DEFAULT, NULL,
|
Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
2009-06-23 20:45:22 +00:00
|
|
|
shmfd->shm_size, VM_PROT_DEFAULT, 0, ucred);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
KASSERT(shmfd->shm_object != NULL, ("shm_create: vm_pager_allocate"));
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WLOCK(shmfd->shm_object);
|
2008-04-13 21:08:34 +00:00
|
|
|
vm_object_clear_flag(shmfd->shm_object, OBJ_ONEMAPPING);
|
|
|
|
vm_object_set_flag(shmfd->shm_object, OBJ_NOSPLIT);
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(shmfd->shm_object);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
vfs_timestamp(&shmfd->shm_birthtime);
|
|
|
|
shmfd->shm_atime = shmfd->shm_mtime = shmfd->shm_ctime =
|
|
|
|
shmfd->shm_birthtime;
|
|
|
|
refcount_init(&shmfd->shm_refs, 1);
|
2013-08-21 17:45:00 +00:00
|
|
|
mtx_init(&shmfd->shm_mtx, "shmrl", NULL, MTX_DEF);
|
|
|
|
rangelock_init(&shmfd->shm_rl);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
#ifdef MAC
|
|
|
|
mac_posixshm_init(shmfd);
|
|
|
|
mac_posixshm_create(ucred, shmfd);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return (shmfd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct shmfd *
|
|
|
|
shm_hold(struct shmfd *shmfd)
|
|
|
|
{
|
|
|
|
|
|
|
|
refcount_acquire(&shmfd->shm_refs);
|
|
|
|
return (shmfd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
shm_drop(struct shmfd *shmfd)
|
|
|
|
{
|
|
|
|
|
|
|
|
if (refcount_release(&shmfd->shm_refs)) {
|
|
|
|
#ifdef MAC
|
|
|
|
mac_posixshm_destroy(shmfd);
|
|
|
|
#endif
|
2013-08-21 17:45:00 +00:00
|
|
|
rangelock_destroy(&shmfd->shm_rl);
|
|
|
|
mtx_destroy(&shmfd->shm_mtx);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
vm_object_deallocate(shmfd->shm_object);
|
|
|
|
free(shmfd, M_SHMFD);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Determine if the credentials have sufficient permissions for a
|
|
|
|
* specified combination of FREAD and FWRITE.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
shm_access(struct shmfd *shmfd, struct ucred *ucred, int flags)
|
|
|
|
{
|
2008-10-28 13:44:11 +00:00
|
|
|
accmode_t accmode;
|
2011-08-16 20:07:47 +00:00
|
|
|
int error;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
|
2008-10-28 13:44:11 +00:00
|
|
|
accmode = 0;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
if (flags & FREAD)
|
2008-10-28 13:44:11 +00:00
|
|
|
accmode |= VREAD;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
if (flags & FWRITE)
|
2008-10-28 13:44:11 +00:00
|
|
|
accmode |= VWRITE;
|
2011-08-16 20:07:47 +00:00
|
|
|
mtx_lock(&shm_timestamp_lock);
|
|
|
|
error = vaccess(VREG, shmfd->shm_mode, shmfd->shm_uid, shmfd->shm_gid,
|
|
|
|
accmode, ucred, NULL);
|
|
|
|
mtx_unlock(&shm_timestamp_lock);
|
|
|
|
return (error);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Dictionary management. We maintain an in-kernel dictionary to map
|
|
|
|
* paths to shmfd objects. We use the FNV hash on the path to store
|
|
|
|
* the mappings in a hash table.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
shm_dict_init(void *arg)
|
|
|
|
{
|
|
|
|
|
|
|
|
mtx_init(&shm_timestamp_lock, "shm timestamps", NULL, MTX_DEF);
|
|
|
|
sx_init(&shm_dict_lock, "shm dictionary");
|
|
|
|
shm_dictionary = hashinit(1024, M_SHMFD, &shm_hash);
|
|
|
|
}
|
|
|
|
SYSINIT(shm_dict_init, SI_SUB_SYSV_SHM, SI_ORDER_ANY, shm_dict_init, NULL);
|
|
|
|
|
|
|
|
static struct shmfd *
|
|
|
|
shm_lookup(char *path, Fnv32_t fnv)
|
|
|
|
{
|
|
|
|
struct shm_mapping *map;
|
|
|
|
|
|
|
|
LIST_FOREACH(map, SHM_HASH(fnv), sm_link) {
|
|
|
|
if (map->sm_fnv != fnv)
|
|
|
|
continue;
|
|
|
|
if (strcmp(map->sm_path, path) == 0)
|
|
|
|
return (map->sm_shmfd);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
shm_insert(char *path, Fnv32_t fnv, struct shmfd *shmfd)
|
|
|
|
{
|
|
|
|
struct shm_mapping *map;
|
|
|
|
|
|
|
|
map = malloc(sizeof(struct shm_mapping), M_SHMFD, M_WAITOK);
|
|
|
|
map->sm_path = path;
|
|
|
|
map->sm_fnv = fnv;
|
|
|
|
map->sm_shmfd = shm_hold(shmfd);
|
2012-04-01 18:22:48 +00:00
|
|
|
shmfd->shm_path = path;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
LIST_INSERT_HEAD(SHM_HASH(fnv), map, sm_link);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_remove(char *path, Fnv32_t fnv, struct ucred *ucred)
|
|
|
|
{
|
|
|
|
struct shm_mapping *map;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
LIST_FOREACH(map, SHM_HASH(fnv), sm_link) {
|
|
|
|
if (map->sm_fnv != fnv)
|
|
|
|
continue;
|
|
|
|
if (strcmp(map->sm_path, path) == 0) {
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_unlink(ucred, map->sm_shmfd);
|
|
|
|
if (error)
|
|
|
|
return (error);
|
|
|
|
#endif
|
|
|
|
error = shm_access(map->sm_shmfd, ucred,
|
|
|
|
FREAD | FWRITE);
|
|
|
|
if (error)
|
|
|
|
return (error);
|
2012-04-01 18:22:48 +00:00
|
|
|
map->sm_shmfd->shm_path = NULL;
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
LIST_REMOVE(map, sm_link);
|
|
|
|
shm_drop(map->sm_shmfd);
|
|
|
|
free(map->sm_path, M_SHMFD);
|
|
|
|
free(map, M_SHMFD);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return (ENOENT);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* System calls. */
|
|
|
|
int
|
2011-09-16 13:58:51 +00:00
|
|
|
sys_shm_open(struct thread *td, struct shm_open_args *uap)
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
{
|
|
|
|
struct filedesc *fdp;
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
struct file *fp;
|
|
|
|
char *path;
|
|
|
|
Fnv32_t fnv;
|
|
|
|
mode_t cmode;
|
|
|
|
int fd, error;
|
|
|
|
|
2011-06-30 10:56:02 +00:00
|
|
|
#ifdef CAPABILITY_MODE
|
|
|
|
/*
|
|
|
|
* shm_open(2) is only allowed for anonymous objects.
|
|
|
|
*/
|
|
|
|
if (IN_CAPABILITY_MODE(td) && (uap->path != SHM_ANON))
|
|
|
|
return (ECAPMODE);
|
|
|
|
#endif
|
|
|
|
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
if ((uap->flags & O_ACCMODE) != O_RDONLY &&
|
|
|
|
(uap->flags & O_ACCMODE) != O_RDWR)
|
|
|
|
return (EINVAL);
|
|
|
|
|
2014-01-24 21:05:07 +00:00
|
|
|
if ((uap->flags & ~(O_ACCMODE | O_CREAT | O_EXCL | O_TRUNC | O_CLOEXEC)) != 0)
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
return (EINVAL);
|
|
|
|
|
|
|
|
fdp = td->td_proc->p_fd;
|
|
|
|
cmode = (uap->mode & ~fdp->fd_cmask) & ACCESSPERMS;
|
|
|
|
|
2013-04-07 15:26:09 +00:00
|
|
|
error = falloc(td, &fp, &fd, O_CLOEXEC);
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
if (error)
|
|
|
|
return (error);
|
|
|
|
|
|
|
|
/* A SHM_ANON path pointer creates an anonymous object. */
|
|
|
|
if (uap->path == SHM_ANON) {
|
|
|
|
/* A read-only anonymous object is pointless. */
|
|
|
|
if ((uap->flags & O_ACCMODE) == O_RDONLY) {
|
|
|
|
fdclose(fdp, fp, fd, td);
|
|
|
|
fdrop(fp, td);
|
|
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
shmfd = shm_alloc(td->td_ucred, cmode);
|
|
|
|
} else {
|
|
|
|
path = malloc(MAXPATHLEN, M_SHMFD, M_WAITOK);
|
|
|
|
error = copyinstr(uap->path, path, MAXPATHLEN, NULL);
|
|
|
|
|
|
|
|
/* Require paths to start with a '/' character. */
|
|
|
|
if (error == 0 && path[0] != '/')
|
|
|
|
error = EINVAL;
|
|
|
|
if (error) {
|
|
|
|
fdclose(fdp, fp, fd, td);
|
|
|
|
fdrop(fp, td);
|
|
|
|
free(path, M_SHMFD);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
fnv = fnv_32_str(path, FNV1_32_INIT);
|
|
|
|
sx_xlock(&shm_dict_lock);
|
|
|
|
shmfd = shm_lookup(path, fnv);
|
|
|
|
if (shmfd == NULL) {
|
|
|
|
/* Object does not yet exist, create it if requested. */
|
|
|
|
if (uap->flags & O_CREAT) {
|
2011-09-02 17:40:39 +00:00
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_create(td->td_ucred,
|
|
|
|
path);
|
|
|
|
if (error == 0) {
|
|
|
|
#endif
|
|
|
|
shmfd = shm_alloc(td->td_ucred, cmode);
|
|
|
|
shm_insert(path, fnv, shmfd);
|
|
|
|
#ifdef MAC
|
|
|
|
}
|
|
|
|
#endif
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
} else {
|
|
|
|
free(path, M_SHMFD);
|
|
|
|
error = ENOENT;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* Object already exists, obtain a new
|
|
|
|
* reference if requested and permitted.
|
|
|
|
*/
|
|
|
|
free(path, M_SHMFD);
|
|
|
|
if ((uap->flags & (O_CREAT | O_EXCL)) ==
|
|
|
|
(O_CREAT | O_EXCL))
|
|
|
|
error = EEXIST;
|
|
|
|
else {
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_open(td->td_ucred,
|
2011-09-02 17:40:39 +00:00
|
|
|
shmfd, FFLAGS(uap->flags & O_ACCMODE));
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
if (error == 0)
|
|
|
|
#endif
|
|
|
|
error = shm_access(shmfd, td->td_ucred,
|
|
|
|
FFLAGS(uap->flags & O_ACCMODE));
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Truncate the file back to zero length if
|
|
|
|
* O_TRUNC was specified and the object was
|
|
|
|
* opened with read/write.
|
|
|
|
*/
|
|
|
|
if (error == 0 &&
|
|
|
|
(uap->flags & (O_ACCMODE | O_TRUNC)) ==
|
|
|
|
(O_RDWR | O_TRUNC)) {
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_truncate(
|
|
|
|
td->td_ucred, fp->f_cred, shmfd);
|
|
|
|
if (error == 0)
|
|
|
|
#endif
|
|
|
|
shm_dotruncate(shmfd, 0);
|
|
|
|
}
|
|
|
|
if (error == 0)
|
|
|
|
shm_hold(shmfd);
|
|
|
|
}
|
|
|
|
sx_xunlock(&shm_dict_lock);
|
|
|
|
|
|
|
|
if (error) {
|
|
|
|
fdclose(fdp, fp, fd, td);
|
|
|
|
fdrop(fp, td);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
finit(fp, FFLAGS(uap->flags & O_ACCMODE), DTYPE_SHM, shmfd, &shm_ops);
|
|
|
|
|
|
|
|
td->td_retval[0] = fd;
|
|
|
|
fdrop(fp, td);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
2011-09-16 13:58:51 +00:00
|
|
|
sys_shm_unlink(struct thread *td, struct shm_unlink_args *uap)
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
{
|
|
|
|
char *path;
|
|
|
|
Fnv32_t fnv;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
path = malloc(MAXPATHLEN, M_TEMP, M_WAITOK);
|
|
|
|
error = copyinstr(uap->path, path, MAXPATHLEN, NULL);
|
|
|
|
if (error) {
|
|
|
|
free(path, M_TEMP);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
fnv = fnv_32_str(path, FNV1_32_INIT);
|
|
|
|
sx_xlock(&shm_dict_lock);
|
|
|
|
error = shm_remove(path, fnv, td->td_ucred);
|
|
|
|
sx_xunlock(&shm_dict_lock);
|
|
|
|
free(path, M_TEMP);
|
|
|
|
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mmap() helper to validate mmap() requests against shm object state
|
|
|
|
* and give mmap() the vm_object to use for the mapping.
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
shm_mmap(struct shmfd *shmfd, vm_size_t objsize, vm_ooffset_t foff,
|
|
|
|
vm_object_t *obj)
|
|
|
|
{
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXXRW: This validation is probably insufficient, and subject to
|
|
|
|
* sign errors. It should be fixed.
|
|
|
|
*/
|
2008-12-01 22:33:50 +00:00
|
|
|
if (foff >= shmfd->shm_size ||
|
|
|
|
foff + objsize > round_page(shmfd->shm_size))
|
Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
|
|
|
return (EINVAL);
|
|
|
|
|
|
|
|
mtx_lock(&shm_timestamp_lock);
|
|
|
|
vfs_timestamp(&shmfd->shm_atime);
|
|
|
|
mtx_unlock(&shm_timestamp_lock);
|
|
|
|
vm_object_reference(shmfd->shm_object);
|
|
|
|
*obj = shmfd->shm_object;
|
|
|
|
return (0);
|
|
|
|
}
|
2011-08-16 20:07:47 +00:00
|
|
|
|
|
|
|
static int
|
|
|
|
shm_chmod(struct file *fp, mode_t mode, struct ucred *active_cred,
|
|
|
|
struct thread *td)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
error = 0;
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
mtx_lock(&shm_timestamp_lock);
|
|
|
|
/*
|
|
|
|
* SUSv4 says that x bits of permission need not be affected.
|
|
|
|
* Be consistent with our shm_open there.
|
|
|
|
*/
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_setmode(active_cred, shmfd, mode);
|
|
|
|
if (error != 0)
|
|
|
|
goto out;
|
|
|
|
#endif
|
|
|
|
error = vaccess(VREG, shmfd->shm_mode, shmfd->shm_uid,
|
|
|
|
shmfd->shm_gid, VADMIN, active_cred, NULL);
|
|
|
|
if (error != 0)
|
|
|
|
goto out;
|
|
|
|
shmfd->shm_mode = mode & ACCESSPERMS;
|
|
|
|
out:
|
|
|
|
mtx_unlock(&shm_timestamp_lock);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
shm_chown(struct file *fp, uid_t uid, gid_t gid, struct ucred *active_cred,
|
|
|
|
struct thread *td)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
int error;
|
|
|
|
|
2011-08-17 12:37:14 +00:00
|
|
|
error = 0;
|
2011-08-16 20:07:47 +00:00
|
|
|
shmfd = fp->f_data;
|
|
|
|
mtx_lock(&shm_timestamp_lock);
|
|
|
|
#ifdef MAC
|
|
|
|
error = mac_posixshm_check_setowner(active_cred, shmfd, uid, gid);
|
|
|
|
if (error != 0)
|
|
|
|
goto out;
|
|
|
|
#endif
|
|
|
|
if (uid == (uid_t)-1)
|
|
|
|
uid = shmfd->shm_uid;
|
|
|
|
if (gid == (gid_t)-1)
|
|
|
|
gid = shmfd->shm_gid;
|
|
|
|
if (((uid != shmfd->shm_uid && uid != active_cred->cr_uid) ||
|
|
|
|
(gid != shmfd->shm_gid && !groupmember(gid, active_cred))) &&
|
|
|
|
(error = priv_check_cred(active_cred, PRIV_VFS_CHOWN, 0)))
|
|
|
|
goto out;
|
|
|
|
shmfd->shm_uid = uid;
|
|
|
|
shmfd->shm_gid = gid;
|
|
|
|
out:
|
|
|
|
mtx_unlock(&shm_timestamp_lock);
|
|
|
|
return (error);
|
|
|
|
}
|
2011-12-14 22:22:19 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Helper routines to allow the backing object of a shared memory file
|
|
|
|
* descriptor to be mapped in the kernel.
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
shm_map(struct file *fp, size_t size, off_t offset, void **memp)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
vm_offset_t kva, ofs;
|
|
|
|
vm_object_t obj;
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
if (fp->f_type != DTYPE_SHM)
|
|
|
|
return (EINVAL);
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
obj = shmfd->shm_object;
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
/*
|
|
|
|
* XXXRW: This validation is probably insufficient, and subject to
|
|
|
|
* sign errors. It should be fixed.
|
|
|
|
*/
|
|
|
|
if (offset >= shmfd->shm_size ||
|
|
|
|
offset + size > round_page(shmfd->shm_size)) {
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
shmfd->shm_kmappings++;
|
|
|
|
vm_object_reference_locked(obj);
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
|
|
|
|
/* Map the object into the kernel_map and wire it. */
|
|
|
|
kva = vm_map_min(kernel_map);
|
|
|
|
ofs = offset & PAGE_MASK;
|
|
|
|
offset = trunc_page(offset);
|
|
|
|
size = round_page(size + ofs);
|
2013-09-09 18:11:59 +00:00
|
|
|
rv = vm_map_find(kernel_map, obj, offset, &kva, size, 0,
|
2013-07-24 20:34:25 +00:00
|
|
|
VMFS_OPTIMAL_SPACE, VM_PROT_READ | VM_PROT_WRITE,
|
2011-12-14 22:22:19 +00:00
|
|
|
VM_PROT_READ | VM_PROT_WRITE, 0);
|
|
|
|
if (rv == KERN_SUCCESS) {
|
|
|
|
rv = vm_map_wire(kernel_map, kva, kva + size,
|
|
|
|
VM_MAP_WIRE_SYSTEM | VM_MAP_WIRE_NOHOLES);
|
|
|
|
if (rv == KERN_SUCCESS) {
|
|
|
|
*memp = (void *)(kva + ofs);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
vm_map_remove(kernel_map, kva, kva + size);
|
|
|
|
} else
|
|
|
|
vm_object_deallocate(obj);
|
|
|
|
|
|
|
|
/* On failure, drop our mapping reference. */
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
shmfd->shm_kmappings--;
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
|
2011-12-15 15:17:19 +00:00
|
|
|
return (vm_mmap_to_errno(rv));
|
2011-12-14 22:22:19 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We require the caller to unmap the entire entry. This allows us to
|
|
|
|
* safely decrement shm_kmappings when a mapping is removed.
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
shm_unmap(struct file *fp, void *mem, size_t size)
|
|
|
|
{
|
|
|
|
struct shmfd *shmfd;
|
|
|
|
vm_map_entry_t entry;
|
|
|
|
vm_offset_t kva, ofs;
|
|
|
|
vm_object_t obj;
|
|
|
|
vm_pindex_t pindex;
|
|
|
|
vm_prot_t prot;
|
|
|
|
boolean_t wired;
|
|
|
|
vm_map_t map;
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
if (fp->f_type != DTYPE_SHM)
|
|
|
|
return (EINVAL);
|
|
|
|
shmfd = fp->f_data;
|
|
|
|
kva = (vm_offset_t)mem;
|
|
|
|
ofs = kva & PAGE_MASK;
|
|
|
|
kva = trunc_page(kva);
|
|
|
|
size = round_page(size + ofs);
|
|
|
|
map = kernel_map;
|
|
|
|
rv = vm_map_lookup(&map, kva, VM_PROT_READ | VM_PROT_WRITE, &entry,
|
|
|
|
&obj, &pindex, &prot, &wired);
|
|
|
|
if (rv != KERN_SUCCESS)
|
|
|
|
return (EINVAL);
|
|
|
|
if (entry->start != kva || entry->end != kva + size) {
|
|
|
|
vm_map_lookup_done(map, entry);
|
|
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
vm_map_lookup_done(map, entry);
|
|
|
|
if (obj != shmfd->shm_object)
|
|
|
|
return (EINVAL);
|
|
|
|
vm_map_remove(map, kva, kva + size);
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
KASSERT(shmfd->shm_kmappings > 0, ("shm_unmap: object not mapped"));
|
|
|
|
shmfd->shm_kmappings--;
|
2013-02-20 12:03:20 +00:00
|
|
|
VM_OBJECT_WUNLOCK(obj);
|
2011-12-14 22:22:19 +00:00
|
|
|
return (0);
|
|
|
|
}
|
2012-04-01 18:22:48 +00:00
|
|
|
|
|
|
|
void
|
|
|
|
shm_path(struct shmfd *shmfd, char *path, size_t size)
|
|
|
|
{
|
|
|
|
|
|
|
|
if (shmfd->shm_path == NULL)
|
|
|
|
return;
|
|
|
|
sx_slock(&shm_dict_lock);
|
|
|
|
if (shmfd->shm_path != NULL)
|
|
|
|
strlcpy(path, shmfd->shm_path, size);
|
|
|
|
sx_sunlock(&shm_dict_lock);
|
|
|
|
}
|