freebsd-skq/sys/net/bpf.h

/*-
 * Copyright (c) 1990, 1991, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from the Stanford/CMU enet packet filter,
 * (net/enet.c) distributed as part of 4.3BSD, and code contributed
 * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
 * Berkeley Laboratory.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      @(#)bpf.h	8.1 (Berkeley) 6/10/93
 *	@(#)bpf.h	1.34 (LBL)     6/16/96
 *
 * $FreeBSD$
 */

#ifndef _NET_BPF_H_
#define _NET_BPF_H_

/* BSD style release date */
#define	BPF_RELEASE 199606

typedef	int32_t	  bpf_int32;
typedef	u_int32_t bpf_u_int32;
typedef	int64_t	  bpf_int64;
typedef	u_int64_t bpf_u_int64;

/*
 * Alignment macros.  BPF_WORDALIGN rounds up to the next
 * even multiple of BPF_ALIGNMENT.
 */
#define BPF_ALIGNMENT sizeof(long)
#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))

#define BPF_MAXINSNS 512
#define BPF_MAXBUFSIZE 0x80000
#define BPF_MINBUFSIZE 32

/*
 *  Structure for BIOCSETF.
 */
struct bpf_program {
	u_int bf_len;
	struct bpf_insn *bf_insns;
};

/*
 * Struct returned by BIOCGSTATS.
 */
struct bpf_stat {
	u_int bs_recv;		/* number of packets received */
	u_int bs_drop;		/* number of packets dropped */
};

/*
 * Struct return by BIOCVERSION.  This represents the version number of
 * the filter language described by the instruction encodings below.
 * bpf understands a program iff kernel_major == filter_major &&
 * kernel_minor >= filter_minor, that is, if the value returned by the
 * running kernel has the same major number and a minor number equal
 * equal to or less than the filter being downloaded.  Otherwise, the
 * results are undefined, meaning an error may be returned or packets
 * may be accepted haphazardly.
 * It has nothing to do with the source code version.
 */
struct bpf_version {
	u_short bv_major;
	u_short bv_minor;
};
/* Current version number of filter architecture. */
#define BPF_MAJOR_VERSION 1
#define BPF_MINOR_VERSION 1

/*
 * Historically, BPF has supported a single buffering model, first using mbuf
 * clusters in kernel, and later using malloc(9) buffers in kernel.  We now
 * support multiple buffering modes, which may be queried and set using
 * BIOCGETBUFMODE and BIOCSETBUFMODE.  So as to avoid handling the complexity
 * of changing modes while sniffing packets, the mode becomes fixed once an
 * interface has been attached to the BPF descriptor.
 */
#define	BPF_BUFMODE_BUFFER	1	/* Kernel buffers with read(). */
#define	BPF_BUFMODE_ZBUF	2	/* Zero-copy buffers. */

/*-
 * Struct used by BIOCSETZBUF, BIOCROTZBUF: describes up to two zero-copy
 * buffer as used by BPF.
 */
struct bpf_zbuf {
	void	*bz_bufa;	/* Location of 'a' zero-copy buffer. */
	void	*bz_bufb;	/* Location of 'b' zero-copy buffer. */
	size_t	 bz_buflen;	/* Size of zero-copy buffers. */
};

#define	BIOCGBLEN	_IOR('B', 102, u_int)
#define	BIOCSBLEN	_IOWR('B', 102, u_int)
#define	BIOCSETF	_IOW('B', 103, struct bpf_program)
#define	BIOCFLUSH	_IO('B', 104)
#define	BIOCPROMISC	_IO('B', 105)
#define	BIOCGDLT	_IOR('B', 106, u_int)
#define	BIOCGETIF	_IOR('B', 107, struct ifreq)
#define	BIOCSETIF	_IOW('B', 108, struct ifreq)
#define	BIOCSRTIMEOUT	_IOW('B', 109, struct timeval)
#define	BIOCGRTIMEOUT	_IOR('B', 110, struct timeval)
#define	BIOCGSTATS	_IOR('B', 111, struct bpf_stat)
#define	BIOCIMMEDIATE	_IOW('B', 112, u_int)
#define	BIOCVERSION	_IOR('B', 113, struct bpf_version)
#define	BIOCGRSIG	_IOR('B', 114, u_int)
#define	BIOCSRSIG	_IOW('B', 115, u_int)
#define	BIOCGHDRCMPLT	_IOR('B', 116, u_int)
#define	BIOCSHDRCMPLT	_IOW('B', 117, u_int)
#define	BIOCGDIRECTION	_IOR('B', 118, u_int)
#define	BIOCSDIRECTION	_IOW('B', 119, u_int)
#define	BIOCSDLT	_IOW('B', 120, u_int)
#define	BIOCGDLTLIST	_IOWR('B', 121, struct bpf_dltlist)
#define	BIOCLOCK	_IO('B', 122)
#define	BIOCSETWF	_IOW('B', 123, struct bpf_program)
#define	BIOCFEEDBACK	_IOW('B', 124, u_int)
#define	BIOCGETBUFMODE	_IOR('B', 125, u_int)
#define	BIOCSETBUFMODE	_IOW('B', 126, u_int)
#define	BIOCGETZMAX	_IOR('B', 127, size_t)
#define	BIOCROTZBUF	_IOR('B', 128, struct bpf_zbuf)
#define	BIOCSETZBUF	_IOW('B', 129, struct bpf_zbuf)
#define	BIOCSETFNR	_IOW('B', 130, struct bpf_program)
#define	BIOCGTSTAMP	_IOR('B', 131, u_int)
#define	BIOCSTSTAMP	_IOW('B', 132, u_int)

/* Obsolete */
#define	BIOCGSEESENT	BIOCGDIRECTION
#define	BIOCSSEESENT	BIOCSDIRECTION

/* Packet directions */
enum bpf_direction {
	BPF_D_IN,	/* See incoming packets */
	BPF_D_INOUT,	/* See incoming and outgoing packets */
	BPF_D_OUT	/* See outgoing packets */
};

/* Time stamping functions */
#define	BPF_T_MICROTIME		0x0000
#define	BPF_T_NANOTIME		0x0001
#define	BPF_T_BINTIME		0x0002
#define	BPF_T_NONE		0x0003
#define	BPF_T_FORMAT_MASK	0x0003
#define	BPF_T_NORMAL		0x0000
#define	BPF_T_FAST		0x0100
#define	BPF_T_MONOTONIC		0x0200
#define	BPF_T_MONOTONIC_FAST	(BPF_T_FAST | BPF_T_MONOTONIC)
#define	BPF_T_FLAG_MASK		0x0300
#define	BPF_T_FORMAT(t)		((t) & BPF_T_FORMAT_MASK)
#define	BPF_T_FLAG(t)		((t) & BPF_T_FLAG_MASK)
#define	BPF_T_VALID(t)						\
    ((t) == BPF_T_NONE || (BPF_T_FORMAT(t) != BPF_T_NONE &&	\
    ((t) & ~(BPF_T_FORMAT_MASK | BPF_T_FLAG_MASK)) == 0))

#define	BPF_T_MICROTIME_FAST		(BPF_T_MICROTIME | BPF_T_FAST)
#define	BPF_T_NANOTIME_FAST		(BPF_T_NANOTIME | BPF_T_FAST)
#define	BPF_T_BINTIME_FAST		(BPF_T_BINTIME | BPF_T_FAST)
#define	BPF_T_MICROTIME_MONOTONIC	(BPF_T_MICROTIME | BPF_T_MONOTONIC)
#define	BPF_T_NANOTIME_MONOTONIC	(BPF_T_NANOTIME | BPF_T_MONOTONIC)
#define	BPF_T_BINTIME_MONOTONIC		(BPF_T_BINTIME | BPF_T_MONOTONIC)
#define	BPF_T_MICROTIME_MONOTONIC_FAST	(BPF_T_MICROTIME | BPF_T_MONOTONIC_FAST)
#define	BPF_T_NANOTIME_MONOTONIC_FAST	(BPF_T_NANOTIME | BPF_T_MONOTONIC_FAST)
#define	BPF_T_BINTIME_MONOTONIC_FAST	(BPF_T_BINTIME | BPF_T_MONOTONIC_FAST)

/*
 * Structure prepended to each packet.
 */
struct bpf_ts {
	bpf_int64	bt_sec;		/* seconds */
	bpf_u_int64	bt_frac;	/* fraction */
};
struct bpf_xhdr {
	struct bpf_ts	bh_tstamp;	/* time stamp */
	bpf_u_int32	bh_caplen;	/* length of captured portion */
	bpf_u_int32	bh_datalen;	/* original length of packet */
	u_short		bh_hdrlen;	/* length of bpf header (this struct
					   plus alignment padding) */
};
/* Obsolete */
struct bpf_hdr {
	struct timeval	bh_tstamp;	/* time stamp */
	bpf_u_int32	bh_caplen;	/* length of captured portion */
	bpf_u_int32	bh_datalen;	/* original length of packet */
	u_short		bh_hdrlen;	/* length of bpf header (this struct
					   plus alignment padding) */
};
#ifdef _KERNEL
#define	MTAG_BPF		0x627066
#define	MTAG_BPF_TIMESTAMP	0
#endif

/*
 * When using zero-copy BPF buffers, a shared memory header is present
 * allowing the kernel BPF implementation and user process to synchronize
 * without using system calls.  This structure defines that header.  When
 * accessing these fields, appropriate atomic operation and memory barriers
 * are required in order not to see stale or out-of-order data; see bpf(4)
 * for reference code to access these fields from userspace.
 *
 * The layout of this structure is critical, and must not be changed; if must
 * fit in a single page on all architectures.
 */
struct bpf_zbuf_header {
	volatile u_int	bzh_kernel_gen;	/* Kernel generation number. */
	volatile u_int	bzh_kernel_len;	/* Length of data in the buffer. */
	volatile u_int	bzh_user_gen;	/* User generation number. */
	u_int _bzh_pad[5];
};

/*
 * Data-link level type codes.
 */
#define DLT_NULL	0	/* BSD loopback encapsulation */
#define DLT_EN10MB	1	/* Ethernet (10Mb) */
#define DLT_EN3MB	2	/* Experimental Ethernet (3Mb) */
#define DLT_AX25	3	/* Amateur Radio AX.25 */
#define DLT_PRONET	4	/* Proteon ProNET Token Ring */
#define DLT_CHAOS	5	/* Chaos */
#define DLT_IEEE802	6	/* IEEE 802 Networks */
#define DLT_ARCNET	7	/* ARCNET */
#define DLT_SLIP	8	/* Serial Line IP */
#define DLT_PPP		9	/* Point-to-point Protocol */
#define DLT_FDDI	10	/* FDDI */
#define DLT_ATM_RFC1483	11	/* LLC/SNAP encapsulated atm */
#define DLT_RAW		12	/* raw IP */

/*
 * These are values from BSD/OS's "bpf.h".
 * These are not the same as the values from the traditional libpcap
 * "bpf.h"; however, these values shouldn't be generated by any
 * OS other than BSD/OS, so the correct values to use here are the
 * BSD/OS values.
 *
 * Platforms that have already assigned these values to other
 * DLT_ codes, however, should give these codes the values
 * from that platform, so that programs that use these codes will
 * continue to compile - even though they won't correctly read
 * files of these types.
 */
#define DLT_SLIP_BSDOS	15	/* BSD/OS Serial Line IP */
#define DLT_PPP_BSDOS	16	/* BSD/OS Point-to-point Protocol */

#define DLT_ATM_CLIP	19	/* Linux Classical-IP over ATM */

/*
 * These values are defined by NetBSD; other platforms should refrain from
 * using them for other purposes, so that NetBSD savefiles with link
 * types of 50 or 51 can be read as this type on all platforms.
 */
#define DLT_PPP_SERIAL	50	/* PPP over serial with HDLC encapsulation */
#define DLT_PPP_ETHER	51	/* PPP over Ethernet */

/*
 * Reserved for the Symantec Enterprise Firewall.
 */
#define DLT_SYMANTEC_FIREWALL	99

/*
 * Values between 100 and 103 are used in capture file headers as
 * link-layer header type LINKTYPE_ values corresponding to DLT_ types
 * that differ between platforms; don't use those values for new DLT_
 * new types.
 */

/*
 * Values starting with 104 are used for newly-assigned link-layer
 * header type values; for those link-layer header types, the DLT_
 * value returned by pcap_datalink() and passed to pcap_open_dead(),
 * and the LINKTYPE_ value that appears in capture files, are the
 * same.
 *
 * DLT_MATCHING_MIN is the lowest such value; DLT_MATCHING_MAX is
 * the highest such value.
 */
#define DLT_MATCHING_MIN	104

/*
 * This value was defined by libpcap 0.5; platforms that have defined
 * it with a different value should define it here with that value -
 * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
 * whatever value that happens to be, so programs will correctly
 * handle files with that link type regardless of the value of
 * DLT_C_HDLC.
 *
 * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
 * compatibility with programs written for BSD/OS.
 *
 * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
 * for source compatibility with programs written for libpcap 0.5.
 */
#define DLT_C_HDLC	104	/* Cisco HDLC */
#define DLT_CHDLC	DLT_C_HDLC

#define DLT_IEEE802_11	105	/* IEEE 802.11 wireless */

/*
 * Values between 106 and 107 are used in capture file headers as
 * link-layer types corresponding to DLT_ types that might differ
 * between platforms; don't use those values for new DLT_ new types.
 */

/*
 * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides
 * with other values.
 * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header
 * (DLCI, etc.).
 */
#define DLT_FRELAY	107

/*
 * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
 * that the AF_ type in the link-layer header is in network byte order.
 *
 * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
 * define it as 108 here.  If OpenBSD picks up this file, it should
 * define DLT_LOOP as 12 in its version, as per the comment above -
 * and should not use 108 as a DLT_ value.
 */
#define DLT_LOOP	108

/*
 * Values between 109 and 112 are used in capture file headers as
 * link-layer types corresponding to DLT_ types that might differ
 * between platforms; don't use those values for new DLT_ new types.
 */

/*
 * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
 * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
 * than OpenBSD.
 */
#define DLT_ENC	109

/*
 * This is for Linux cooked sockets.
 */
#define DLT_LINUX_SLL	113

/*
 * Apple LocalTalk hardware.
 */
#define DLT_LTALK	114

/*
 * Acorn Econet.
 */
#define DLT_ECONET	115

/*
 * Reserved for use with OpenBSD ipfilter.
 */
#define DLT_IPFILTER	116

/*
 * Reserved for use in capture-file headers as a link-layer type
 * corresponding to OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD,
 * but that's DLT_LANE8023 in SuSE 6.3, so we can't use 17 for it
 * in capture-file headers.
 */
#define DLT_PFLOG	117

/*
 * Registered for Cisco-internal use.
 */
#define DLT_CISCO_IOS	118

/*
 * Reserved for 802.11 cards using the Prism II chips, with a link-layer
 * header including Prism monitor mode information plus an 802.11
 * header.
 */
#define DLT_PRISM_HEADER	119

/*
 * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
 * (see Doug Ambrisko's FreeBSD patches).
 */
#define DLT_AIRONET_HEADER	120

/*
 * Reserved for use by OpenBSD's pfsync device.
 */
#define DLT_PFSYNC	121

/*
 * Reserved for Siemens HiPath HDLC. XXX
 */
#define DLT_HHDLC	121

/*
 * Reserved for RFC 2625 IP-over-Fibre Channel.
 */
#define DLT_IP_OVER_FC	122

/*
 * Reserved for Full Frontal ATM on Solaris.
 */
#define DLT_SUNATM	123

/*
 * Reserved as per request from Kent Dahlgren <kent@praesum.com>
 * for private use.
 */
#define DLT_RIO		124	/* RapidIO */
#define DLT_PCI_EXP	125	/* PCI Express */
#define DLT_AURORA	126	/* Xilinx Aurora link layer */

/*
 * BSD header for 802.11 plus a number of bits of link-layer information
 * including radio information.
 */
#ifndef DLT_IEEE802_11_RADIO
#define DLT_IEEE802_11_RADIO	127
#endif

/*
 * Reserved for TZSP encapsulation.
 */
#define DLT_TZSP		128	/* Tazmen Sniffer Protocol */

/*
 * Reserved for Linux ARCNET.
 */
#define DLT_ARCNET_LINUX	129

/*
 * Juniper-private data link types.
 */
#define DLT_JUNIPER_MLPPP	130
#define DLT_JUNIPER_MLFR	131
#define DLT_JUNIPER_ES		132
#define DLT_JUNIPER_GGSN	133
#define DLT_JUNIPER_MFR		134
#define DLT_JUNIPER_ATM2	135
#define DLT_JUNIPER_SERVICES	136
#define DLT_JUNIPER_ATM1	137

/*
 * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
 * <dieter@apple.com>.  The header that's presented is an Ethernet-like
 * header:
 *
 *	#define FIREWIRE_EUI64_LEN	8
 *	struct firewire_header {
 *		u_char  firewire_dhost[FIREWIRE_EUI64_LEN];
 *		u_char  firewire_shost[FIREWIRE_EUI64_LEN];
 *		u_short firewire_type;
 *	};
 *
 * with "firewire_type" being an Ethernet type value, rather than,
 * for example, raw GASP frames being handed up.
 */
#define DLT_APPLE_IP_OVER_IEEE1394	138

/*
 * Various SS7 encapsulations, as per a request from Jeff Morriss
 * <jeff.morriss[AT]ulticom.com> and subsequent discussions.
 */
#define DLT_MTP2_WITH_PHDR	139	/* pseudo-header with various info, followed by MTP2 */
#define DLT_MTP2		140	/* MTP2, without pseudo-header */
#define DLT_MTP3		141	/* MTP3, without pseudo-header or MTP2 */
#define DLT_SCCP		142	/* SCCP, without pseudo-header or MTP2 or MTP3 */

/*
 * Reserved for DOCSIS.
 */
#define DLT_DOCSIS	143

/*
 * Reserved for Linux IrDA.
 */
#define DLT_LINUX_IRDA	144

/*
 * Reserved for IBM SP switch and IBM Next Federation switch.
 */
#define DLT_IBM_SP	145
#define DLT_IBM_SN	146

/*
 * Reserved for private use.  If you have some link-layer header type
 * that you want to use within your organization, with the capture files
 * using that link-layer header type not ever be sent outside your
 * organization, you can use these values.
 *
 * No libpcap release will use these for any purpose, nor will any
 * tcpdump release use them, either.
 *
 * Do *NOT* use these in capture files that you expect anybody not using
 * your private versions of capture-file-reading tools to read; in
 * particular, do *NOT* use them in products, otherwise you may find that
 * people won't be able to use tcpdump, or snort, or Ethereal, or... to
 * read capture files from your firewall/intrusion detection/traffic
 * monitoring/etc. appliance, or whatever product uses that DLT_ value,
 * and you may also find that the developers of those applications will
 * not accept patches to let them read those files.
 *
 * Also, do not use them if somebody might send you a capture using them
 * for *their* private type and tools using them for *your* private type
 * would have to read them.
 *
 * Instead, ask "tcpdump-workers@tcpdump.org" for a new DLT_ value,
 * as per the comment above, and use the type you're given.
 */
#define DLT_USER0		147
#define DLT_USER1		148
#define DLT_USER2		149
#define DLT_USER3		150
#define DLT_USER4		151
#define DLT_USER5		152
#define DLT_USER6		153
#define DLT_USER7		154
#define DLT_USER8		155
#define DLT_USER9		156
#define DLT_USER10		157
#define DLT_USER11		158
#define DLT_USER12		159
#define DLT_USER13		160
#define DLT_USER14		161
#define DLT_USER15		162

/*
 * For future use with 802.11 captures - defined by AbsoluteValue
 * Systems to store a number of bits of link-layer information
 * including radio information:
 *
 *	http://www.shaftnet.org/~pizza/software/capturefrm.txt
 *
 * but it might be used by some non-AVS drivers now or in the
 * future.
 */
#define DLT_IEEE802_11_RADIO_AVS 163	/* 802.11 plus AVS radio header */

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The DLT_s are used
 * for passing on chassis-internal metainformation such as
 * QOS profiles, etc..
 */
#define DLT_JUNIPER_MONITOR     164

/*
 * Reserved for BACnet MS/TP.
 */
#define DLT_BACNET_MS_TP	165

/*
 * Another PPP variant as per request from Karsten Keil <kkeil@suse.de>.
 *
 * This is used in some OSes to allow a kernel socket filter to distinguish
 * between incoming and outgoing packets, on a socket intended to
 * supply pppd with outgoing packets so it can do dial-on-demand and
 * hangup-on-lack-of-demand; incoming packets are filtered out so they
 * don't cause pppd to hold the connection up (you don't want random
 * input packets such as port scans, packets from old lost connections,
 * etc. to force the connection to stay up).
 *
 * The first byte of the PPP header (0xff03) is modified to accomodate
 * the direction - 0x00 = IN, 0x01 = OUT.
 */
#define DLT_PPP_PPPD		166

/*
 * Names for backwards compatibility with older versions of some PPP
 * software; new software should use DLT_PPP_PPPD.
 */
#define DLT_PPP_WITH_DIRECTION	DLT_PPP_PPPD
#define DLT_LINUX_PPP_WITHDIRECTION	DLT_PPP_PPPD

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The DLT_s are used
 * for passing on chassis-internal metainformation such as
 * QOS profiles, cookies, etc..
 */
#define DLT_JUNIPER_PPPOE       167
#define DLT_JUNIPER_PPPOE_ATM   168

#define DLT_GPRS_LLC		169	/* GPRS LLC */
#define DLT_GPF_T		170	/* GPF-T (ITU-T G.7041/Y.1303) */
#define DLT_GPF_F		171	/* GPF-F (ITU-T G.7041/Y.1303) */

/*
 * Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line
 * monitoring equipment.
 */
#define DLT_GCOM_T1E1		172
#define DLT_GCOM_SERIAL		173

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The DLT_ is used
 * for internal communication to Physical Interface Cards (PIC)
 */
#define DLT_JUNIPER_PIC_PEER    174

/*
 * Link types requested by Gregor Maier <gregor@endace.com> of Endace
 * Measurement Systems.  They add an ERF header (see
 * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
 * the link-layer header.
 */
#define DLT_ERF_ETH		175	/* Ethernet */
#define DLT_ERF_POS		176	/* Packet-over-SONET */

/*
 * Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD
 * for vISDN (http://www.orlandi.com/visdn/).  Its link-layer header
 * includes additional information before the LAPD header, so it's
 * not necessarily a generic LAPD header.
 */
#define DLT_LINUX_LAPD		177

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.
 * The DLT_ are used for prepending meta-information
 * like interface index, interface name
 * before standard Ethernet, PPP, Frelay & C-HDLC Frames
 */
#define DLT_JUNIPER_ETHER       178
#define DLT_JUNIPER_PPP         179
#define DLT_JUNIPER_FRELAY      180
#define DLT_JUNIPER_CHDLC       181

/*
 * Multi Link Frame Relay (FRF.16)
 */
#define DLT_MFR                 182

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.
 * The DLT_ is used for internal communication with a
 * voice Adapter Card (PIC)
 */
#define DLT_JUNIPER_VP          183

/*
 * Arinc 429 frames.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 * Every frame contains a 32bit A429 label.
 * More documentation on Arinc 429 can be found at
 * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
 */
#define DLT_A429                184

/*
 * Arinc 653 Interpartition Communication messages.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 * Please refer to the A653-1 standard for more information.
 */
#define DLT_A653_ICM            185

/*
 * USB packets, beginning with a USB setup header; requested by
 * Paolo Abeni <paolo.abeni@email.it>.
 */
#define DLT_USB			186

/*
 * Bluetooth HCI UART transport layer (part H:4); requested by
 * Paolo Abeni.
 */
#define DLT_BLUETOOTH_HCI_H4	187

/*
 * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz
 * <cruz_petagay@bah.com>.
 */
#define DLT_IEEE802_16_MAC_CPS	188

/*
 * USB packets, beginning with a Linux USB header; requested by
 * Paolo Abeni <paolo.abeni@email.it>.
 */
#define DLT_USB_LINUX		189

/*
 * Controller Area Network (CAN) v. 2.0B packets.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 * Used to dump CAN packets coming from a CAN Vector board.
 * More documentation on the CAN v2.0B frames can be found at
 * http://www.can-cia.org/downloads/?269
 */
#define DLT_CAN20B              190

/*
 * IEEE 802.15.4, with address fields padded, as is done by Linux
 * drivers; requested by Juergen Schimmer.
 */
#define DLT_IEEE802_15_4_LINUX	191

/*
 * Per Packet Information encapsulated packets.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 */
#define DLT_PPI			192

/*
 * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header;
 * requested by Charles Clancy.
 */
#define DLT_IEEE802_16_MAC_CPS_RADIO	193

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.
 * The DLT_ is used for internal communication with a
 * integrated service module (ISM).
 */
#define DLT_JUNIPER_ISM         194

/*
 * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
 * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>.
 */
#define DLT_IEEE802_15_4	195

/*
 * Various link-layer types, with a pseudo-header, for SITA
 * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
 */
#define DLT_SITA		196

/*
 * Various link-layer types, with a pseudo-header, for Endace DAG cards;
 * encapsulates Endace ERF records.  Requested by Stephen Donnelly
 * <stephen@endace.com>.
 */
#define DLT_ERF			197

/*
 * Special header prepended to Ethernet packets when capturing from a
 * u10 Networks board.  Requested by Phil Mulholland
 * <phil@u10networks.com>.
 */
#define DLT_RAIF1		198

/*
 * IPMB packet for IPMI, beginning with the I2C slave address, followed
 * by the netFn and LUN, etc..  Requested by Chanthy Toeung
 * <chanthy.toeung@ca.kontron.com>.
 */
#define DLT_IPMB		199

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.
 * The DLT_ is used for capturing data on a secure tunnel interface.
 */
#define DLT_JUNIPER_ST          200

/*
 * Bluetooth HCI UART transport layer (part H:4), with pseudo-header
 * that includes direction information; requested by Paolo Abeni.
 */
#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR	201

/*
 * AX.25 packet with a 1-byte KISS header; see
 *
 *      http://www.ax25.net/kiss.htm
 *
 * as per Richard Stearn <richard@rns-stearn.demon.co.uk>.
 */
#define DLT_AX25_KISS           202

/*
 * LAPD packets from an ISDN channel, starting with the address field,
 * with no pseudo-header.
 * Requested by Varuna De Silva <varunax@gmail.com>.
 */
#define DLT_LAPD                203

/*
 * Variants of various link-layer headers, with a one-byte direction
 * pseudo-header prepended - zero means "received by this host",
 * non-zero (any non-zero value) means "sent by this host" - as per
 * Will Barker <w.barker@zen.co.uk>.
 */
#define DLT_PPP_WITH_DIR        204     /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */
#define DLT_C_HDLC_WITH_DIR     205     /* Cisco HDLC */
#define DLT_FRELAY_WITH_DIR     206     /* Frame Relay */
#define DLT_LAPB_WITH_DIR       207     /* LAPB */

/*
 * 208 is reserved for an as-yet-unspecified proprietary link-layer
 * type, as requested by Will Barker.
 */

/*
 * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman
 * <avn@pigeonpoint.com>.
 */
#define DLT_IPMB_LINUX          209

/*
 * FlexRay automotive bus - http://www.flexray.com/ - as requested
 * by Hannes Kaelber <hannes.kaelber@x2e.de>.
 */
#define DLT_FLEXRAY             210

/*
 * Media Oriented Systems Transport (MOST) bus for multimedia
 * transport - http://www.mostcooperation.com/ - as requested
 * by Hannes Kaelber <hannes.kaelber@x2e.de>.
 */
#define DLT_MOST                211

/*
 * Local Interconnect Network (LIN) bus for vehicle networks -
 * http://www.lin-subbus.org/ - as requested by Hannes Kaelber
 * <hannes.kaelber@x2e.de>.
 */
#define DLT_LIN                 212

/*
 * X2E-private data link type used for serial line capture,
 * as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
 */
#define DLT_X2E_SERIAL          213

/*
 * X2E-private data link type used for the Xoraya data logger
 * family, as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
 */
#define DLT_X2E_XORAYA          214

/*
 * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
 * nothing), but with the PHY-level data for non-ASK PHYs (4 octets
 * of 0 as preamble, one octet of SFD, one octet of frame length+
 * reserved bit, and then the MAC-layer data, starting with the
 * frame control field).
 *
 * Requested by Max Filippov <jcmvbkbc@gmail.com>.
 */
#define DLT_IEEE802_15_4_NONASK_PHY     215

/* 
 * David Gibson <david@gibson.dropbear.id.au> requested this for
 * captures from the Linux kernel /dev/input/eventN devices. This
 * is used to communicate keystrokes and mouse movements from the
 * Linux kernel to display systems, such as Xorg. 
 */
#define	DLT_LINUX_EVDEV		216

/*
 * GSM Um and Abis interfaces, preceded by a "gsmtap" header.
 *
 * Requested by Harald Welte <laforge@gnumonks.org>.
 */
#define	DLT_GSMTAP_UM		217
#define	DLT_GSMTAP_ABIS		218

/*
 * MPLS, with an MPLS label as the link-layer header.
 * Requested by Michele Marchetto <michele@openbsd.org> on behalf
 * of OpenBSD.
 */
#define	DLT_MPLS		219

/*
 * USB packets, beginning with a Linux USB header, with the USB header
 * padded to 64 bytes; required for memory-mapped access.
 */
#define	DLT_USB_LINUX_MMAPPED	220

/*
 * DECT packets, with a pseudo-header; requested by
 * Matthias Wenzel <tcpdump@mazzoo.de>.
 */
#define	DLT_DECT		221
/*
 * From: "Lidwa, Eric (GSFC-582.0)[SGT INC]" <eric.lidwa-1@nasa.gov>
 * Date: Mon, 11 May 2009 11:18:30 -0500
 *
 * DLT_AOS. We need it for AOS Space Data Link Protocol.
 *   I have already written dissectors for but need an OK from
 *   legal before I can submit a patch.
 *
 */
#define	DLT_AOS			222

/*
 * Wireless HART (Highway Addressable Remote Transducer)
 * From the HART Communication Foundation
 * IES/PAS 62591
 *
 * Requested by Sam Roberts <vieuxtech@gmail.com>.
 */
#define	DLT_WIHART		223

/*
 * Fibre Channel FC-2 frames, beginning with a Frame_Header.
 * Requested by Kahou Lei <kahou82@gmail.com>.
 */
#define	DLT_FC_2		224

/*
 * Fibre Channel FC-2 frames, beginning with an encoding of the
 * SOF, and ending with an encoding of the EOF.
 *
 * The encodings represent the frame delimiters as 4-byte sequences
 * representing the corresponding ordered sets, with K28.5
 * represented as 0xBC, and the D symbols as the corresponding
 * byte values; for example, SOFi2, which is K28.5 - D21.5 - D1.2 - D21.2,
 * is represented as 0xBC 0xB5 0x55 0x55.
 *
 * Requested by Kahou Lei <kahou82@gmail.com>.
 */
#define	DLT_FC_2_WITH_FRAME_DELIMS	225
/*
 * Solaris ipnet pseudo-header; requested by Darren Reed <Darren.Reed@Sun.COM>.
 *
 * The pseudo-header starts with a one-byte version number; for version 2,
 * the pseudo-header is:
 *
 * struct dl_ipnetinfo {
 *     u_int8_t   dli_version;
 *     u_int8_t   dli_family;
 *     u_int16_t  dli_htype;
 *     u_int32_t  dli_pktlen;
 *     u_int32_t  dli_ifindex;
 *     u_int32_t  dli_grifindex;
 *     u_int32_t  dli_zsrc;
 *     u_int32_t  dli_zdst;
 * };
 *
 * dli_version is 2 for the current version of the pseudo-header.
 *
 * dli_family is a Solaris address family value, so it's 2 for IPv4
 * and 26 for IPv6.
 *
 * dli_htype is a "hook type" - 0 for incoming packets, 1 for outgoing
 * packets, and 2 for packets arriving from another zone on the same
 * machine.
 *
 * dli_pktlen is the length of the packet data following the pseudo-header
 * (so the captured length minus dli_pktlen is the length of the
 * pseudo-header, assuming the entire pseudo-header was captured).
 *
 * dli_ifindex is the interface index of the interface on which the
 * packet arrived.
 *
 * dli_grifindex is the group interface index number (for IPMP interfaces).
 *
 * dli_zsrc is the zone identifier for the source of the packet.
 *
 * dli_zdst is the zone identifier for the destination of the packet.
 *
 * A zone number of 0 is the global zone; a zone number of 0xffffffff
 * means that the packet arrived from another host on the network, not
 * from another zone on the same machine.
 *
 * An IPv4 or IPv6 datagram follows the pseudo-header; dli_family indicates
 * which of those it is.
 */
#define	DLT_IPNET			226

/*
 * CAN (Controller Area Network) frames, with a pseudo-header as supplied
 * by Linux SocketCAN.  See Documentation/networking/can.txt in the Linux
 * source.
 *
 * Requested by Felix Obenhuber <felix@obenhuber.de>.
 */
#define	DLT_CAN_SOCKETCAN		227

/*
 * Raw IPv4/IPv6; different from DLT_RAW in that the DLT_ value specifies
 * whether it's v4 or v6.  Requested by Darren Reed <Darren.Reed@Sun.COM>.
 */
#define DLT_IPV4		228
#define DLT_IPV6		229

/*
 * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
 * nothing), and with no FCS at the end of the frame; requested by
 * Jon Smirl <jonsmirl@gmail.com>.
 */
#define DLT_IEEE802_15_4_NOFCS	230

/*
 * Raw D-Bus:
 *
 *	http://www.freedesktop.org/wiki/Software/dbus
 *
 * messages:
 *
 *	http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-messages
 *
 * starting with the endianness flag, followed by the message type, etc.,
 * but without the authentication handshake before the message sequence:
 *
 *	http://dbus.freedesktop.org/doc/dbus-specification.html#auth-protocol
 *
 * Requested by Martin Vidner <martin@vidner.net>.
 */
#define DLT_DBUS		231

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.
 */
#define DLT_JUNIPER_VS			232
#define DLT_JUNIPER_SRX_E2E		233
#define DLT_JUNIPER_FIBRECHANNEL	234

/*
 * DVB-CI (DVB Common Interface for communication between a PC Card
 * module and a DVB receiver).  See
 *
 *	http://www.kaiser.cx/pcap-dvbci.html
 *
 * for the specification.
 *
 * Requested by Martin Kaiser <martin@kaiser.cx>.
 */
#define DLT_DVB_CI		235

/*
 * Variant of 3GPP TS 27.010 multiplexing protocol (similar to, but
 * *not* the same as, 27.010).  Requested by Hans-Christoph Schemmel
 * <hans-christoph.schemmel@cinterion.com>.
 */
#define DLT_MUX27010		236

/*
 * STANAG 5066 D_PDUs.  Requested by M. Baris Demiray
 * <barisdemiray@gmail.com>.
 */
#define DLT_STANAG_5066_D_PDU	237

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.
 */
#define DLT_JUNIPER_ATM_CEMIC	238

/*
 * NetFilter LOG messages 
 * (payload of netlink NFNL_SUBSYS_ULOG/NFULNL_MSG_PACKET packets)
 *
 * Requested by Jakub Zawadzki <darkjames-ws@darkjames.pl>
 */
#define DLT_NFLOG		239

/*
 * Hilscher Gesellschaft fuer Systemautomation mbH link-layer type
 * for Ethernet packets with a 4-byte pseudo-header and always
 * with the payload including the FCS, as supplied by their
 * netANALYZER hardware and software.
 *
 * Requested by Holger P. Frommer <HPfrommer@hilscher.com>
 */
#define DLT_NETANALYZER		240

/*
 * Hilscher Gesellschaft fuer Systemautomation mbH link-layer type
 * for Ethernet packets with a 4-byte pseudo-header and FCS and
 * with the Ethernet header preceded by 7 bytes of preamble and
 * 1 byte of SFD, as supplied by their netANALYZER hardware and
 * software.
 *
 * Requested by Holger P. Frommer <HPfrommer@hilscher.com>
 */
#define DLT_NETANALYZER_TRANSPARENT	241

/*
 * IP-over-InfiniBand, as specified by RFC 4391.
 *
 * Requested by Petr Sumbera <petr.sumbera@oracle.com>.
 */
#define DLT_IPOIB		242

/*
 * MPEG-2 transport stream (ISO 13818-1/ITU-T H.222.0).
 *
 * Requested by Guy Martin <gmsoft@tuxicoman.be>.
 */
#define DLT_MPEG_2_TS		243

/*
 * ng4T GmbH's UMTS Iub/Iur-over-ATM and Iub/Iur-over-IP format as
 * used by their ng40 protocol tester.
 *
 * Requested by Jens Grimmer <jens.grimmer@ng4t.com>.
 */
#define DLT_NG40		244

/*
 * Pseudo-header giving adapter number and flags, followed by an NFC
 * (Near-Field Communications) Logical Link Control Protocol (LLCP) PDU,
 * as specified by NFC Forum Logical Link Control Protocol Technical
 * Specification LLCP 1.1.
 *
 * Requested by Mike Wakerly <mikey@google.com>.
 */
#define DLT_NFC_LLCP		245

/*
 * 245 is used as LINKTYPE_PFSYNC; do not use it for any other purpose.
 *
 * DLT_PFSYNC has different values on different platforms, and all of
 * them collide with something used elsewhere.  On platforms that
 * don't already define it, define it as 245.
 */
#if !defined(__FreeBSD__) && !defined(__OpenBSD__) && !defined(__NetBSD__) && !defined(__DragonFly__) && !defined(__APPLE__)
#define DLT_PFSYNC		246
#endif

/*
 * Raw InfiniBand packets, starting with the Local Routing Header.
 *
 * Requested by Oren Kladnitsky <orenk@mellanox.com>.
 */
#define DLT_INFINIBAND		247

/*
 * SCTP, with no lower-level protocols (i.e., no IPv4 or IPv6).
 *
 * Requested by Michael Tuexen <Michael.Tuexen@lurchi.franken.de>.
 */
#define DLT_SCTP		248

/*
 * USB packets, beginning with a USBPcap header.
 *
 * Requested by Tomasz Mon <desowin@gmail.com>
 */
#define DLT_USBPCAP		249

/*
 * Schweitzer Engineering Laboratories "RTAC" product serial-line
 * packets.
 *
 * Requested by Chris Bontje <chris_bontje@selinc.com>.
 */
#define DLT_RTAC_SERIAL		250

/*
 * Bluetooth Low Energy air interface link-layer packets.
 *
 * Requested by Mike Kershaw <dragorn@kismetwireless.net>.
 */
#define DLT_BLUETOOTH_LE_LL	251

/*
 * DLT type for upper-protocol layer PDU saves from wireshark.
 * 
 * the actual contents are determined by two TAGs stored with each
 * packet:
 *   EXP_PDU_TAG_LINKTYPE          the link type (LINKTYPE_ value) of the
 *				   original packet.
 *
 *   EXP_PDU_TAG_PROTO_NAME        the name of the wireshark dissector
 * 				   that can make sense of the data stored.
 */
#define DLT_WIRESHARK_UPPER_PDU	252

/*
 * DLT type for the netlink protocol (nlmon devices).
 */
#define DLT_NETLINK		253

/*
 * Bluetooth Linux Monitor headers for the BlueZ stack.
 */
#define DLT_BLUETOOTH_LINUX_MONITOR	254

/*
 * Bluetooth Basic Rate/Enhanced Data Rate baseband packets, as
 * captured by Ubertooth.
 */
#define DLT_BLUETOOTH_BREDR_BB	255

/*
 * Bluetooth Low Energy link layer packets, as captured by Ubertooth.
 */
#define DLT_BLUETOOTH_LE_LL_WITH_PHDR	256

/*
 * PROFIBUS data link layer.
 */
#define DLT_PROFIBUS_DL		257

/*
 * Apple's DLT_PKTAP headers.
 *
 * Sadly, the folks at Apple either had no clue that the DLT_USERn values
 * are for internal use within an organization and partners only, and
 * didn't know that the right way to get a link-layer header type is to
 * ask tcpdump.org for one, or knew and didn't care, so they just
 * used DLT_USER2, which causes problems for everything except for
 * their version of tcpdump.
 *
 * So I'll just give them one; hopefully this will show up in a
 * libpcap release in time for them to get this into 10.10 Big Sur
 * or whatever Mavericks' successor is called.  LINKTYPE_PKTAP
 * will be 258 *even on OS X*; that is *intentional*, so that
 * PKTAP files look the same on *all* OSes (different OSes can have
 * different numerical values for a given DLT_, but *MUST NOT* have
 * different values for what goes in a file, as files can be moved
 * between OSes!).
 *
 * When capturing, on a system with a Darwin-based OS, on a device
 * that returns 149 (DLT_USER2 and Apple's DLT_PKTAP) with this
 * version of libpcap, the DLT_ value for the pcap_t  will be DLT_PKTAP,
 * and that will continue to be DLT_USER2 on Darwin-based OSes. That way,
 * binary compatibility with Mavericks is preserved for programs using
 * this version of libpcap.  This does mean that if you were using
 * DLT_USER2 for some capture device on OS X, you can't do so with
 * this version of libpcap, just as you can't with Apple's libpcap -
 * on OS X, they define DLT_PKTAP to be DLT_USER2, so programs won't
 * be able to distinguish between PKTAP and whatever you were using
 * DLT_USER2 for.
 *
 * If the program saves the capture to a file using this version of
 * libpcap's pcap_dump code, the LINKTYPE_ value in the file will be
 * LINKTYPE_PKTAP, which will be 258, even on Darwin-based OSes.
 * That way, the file will *not* be a DLT_USER2 file.  That means
 * that the latest version of tcpdump, when built with this version
 * of libpcap, and sufficiently recent versions of Wireshark will
 * be able to read those files and interpret them correctly; however,
 * Apple's version of tcpdump in OS X 10.9 won't be able to handle
 * them.  (Hopefully, Apple will pick up this version of libpcap,
 * and the corresponding version of tcpdump, so that tcpdump will
 * be able to handle the old LINKTYPE_USER2 captures *and* the new
 * LINKTYPE_PKTAP captures.)
 */
#ifdef __APPLE__
#define DLT_PKTAP	DLT_USER2
#else
#define DLT_PKTAP	258
#endif

/*
 * Ethernet packets preceded by a header giving the last 6 octets
 * of the preamble specified by 802.3-2012 Clause 65, section
 * 65.1.3.2 "Transmit".
 */
#define DLT_EPON	259

/*
 * IPMI trace packets, as specified by Table 3-20 "Trace Data Block Format"
 * in the PICMG HPM.2 specification.
 */
#define DLT_IPMI_HPM_2	260

#define DLT_MATCHING_MAX	260	/* highest value in the "matching" range */

/*
 * DLT and savefile link type values are split into a class and
 * a member of that class.  A class value of 0 indicates a regular
 * DLT_/LINKTYPE_ value.
 */
#define DLT_CLASS(x)            ((x) & 0x03ff0000)

/*
 * The instruction encodings.
 *
 * Please inform tcpdump-workers@lists.tcpdump.org if you use any
 * of the reserved values, so that we can note that they're used
 * (and perhaps implement it in the reference BPF implementation
 * and encourage its implementation elsewhere).
 */

/*
 * The upper 8 bits of the opcode aren't used. BSD/OS used 0x8000.
 */

/* instruction classes */
#define BPF_CLASS(code) ((code) & 0x07)
#define		BPF_LD		0x00
#define		BPF_LDX		0x01
#define		BPF_ST		0x02
#define		BPF_STX		0x03
#define		BPF_ALU		0x04
#define		BPF_JMP		0x05
#define		BPF_RET		0x06
#define		BPF_MISC	0x07

/* ld/ldx fields */
#define BPF_SIZE(code)	((code) & 0x18)
#define		BPF_W		0x00
#define		BPF_H		0x08
#define		BPF_B		0x10
/*				0x18	reserved; used by BSD/OS */
#define BPF_MODE(code)	((code) & 0xe0)
#define		BPF_IMM 	0x00
#define		BPF_ABS		0x20
#define		BPF_IND		0x40
#define		BPF_MEM		0x60
#define		BPF_LEN		0x80
#define		BPF_MSH		0xa0
/*				0xc0	reserved; used by BSD/OS */
/*				0xe0	reserved; used by BSD/OS */

/* alu/jmp fields */
#define BPF_OP(code)	((code) & 0xf0)
#define		BPF_ADD		0x00
#define		BPF_SUB		0x10
#define		BPF_MUL		0x20
#define		BPF_DIV		0x30
#define		BPF_OR		0x40
#define		BPF_AND		0x50
#define		BPF_LSH		0x60
#define		BPF_RSH		0x70
#define		BPF_NEG		0x80
#define		BPF_MOD		0x90
#define		BPF_XOR		0xa0
/*				0xb0	reserved */
/*				0xc0	reserved */
/*				0xd0	reserved */
/*				0xe0	reserved */
/*				0xf0	reserved */

#define		BPF_JA		0x00
#define		BPF_JEQ		0x10
#define		BPF_JGT		0x20
#define		BPF_JGE		0x30
#define		BPF_JSET	0x40
/*				0x50	reserved; used on BSD/OS */
/*				0x60	reserved */
/*				0x70	reserved */
/*				0x80	reserved */
/*				0x90	reserved */
/*				0xa0	reserved */
/*				0xb0	reserved */
/*				0xc0	reserved */
/*				0xd0	reserved */
/*				0xe0	reserved */
/*				0xf0	reserved */
#define BPF_SRC(code)	((code) & 0x08)
#define		BPF_K		0x00
#define		BPF_X		0x08

/* ret - BPF_K and BPF_X also apply */
#define BPF_RVAL(code)	((code) & 0x18)
#define		BPF_A		0x10
/*				0x18	reserved */

/* misc */
#define BPF_MISCOP(code) ((code) & 0xf8)
#define		BPF_TAX		0x00
/*				0x08	reserved */
/*				0x10	reserved */
/*				0x18	reserved */
/* #define	BPF_COP		0x20	NetBSD "coprocessor" extensions */
/*				0x28	reserved */
/*				0x30	reserved */
/*				0x38	reserved */
/* #define	BPF_COPX	0x40	NetBSD "coprocessor" extensions */
/*					also used on BSD/OS */
/*				0x48	reserved */
/*				0x50	reserved */
/*				0x58	reserved */
/*				0x60	reserved */
/*				0x68	reserved */
/*				0x70	reserved */
/*				0x78	reserved */
#define		BPF_TXA		0x80
/*				0x88	reserved */
/*				0x90	reserved */
/*				0x98	reserved */
/*				0xa0	reserved */
/*				0xa8	reserved */
/*				0xb0	reserved */
/*				0xb8	reserved */
/*				0xc0	reserved; used on BSD/OS */
/*				0xc8	reserved */
/*				0xd0	reserved */
/*				0xd8	reserved */
/*				0xe0	reserved */
/*				0xe8	reserved */
/*				0xf0	reserved */
/*				0xf8	reserved */

/*
 * The instruction data structure.
 */
struct bpf_insn {
	u_short		code;
	u_char		jt;
	u_char		jf;
	bpf_u_int32	k;
};

/*
 * Macros for insn array initializers.
 */
#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }

/*
 * Structure to retrieve available DLTs for the interface.
 */
struct bpf_dltlist {
	u_int	bfl_len;	/* number of bfd_list array */
	u_int	*bfl_list;	/* array of DLTs */
};

#ifdef _KERNEL
#ifdef MALLOC_DECLARE
MALLOC_DECLARE(M_BPF);
#endif
#ifdef SYSCTL_DECL
SYSCTL_DECL(_net_bpf);
#endif

/*
 * Rotate the packet buffers in descriptor d.  Move the store buffer into the
 * hold slot, and the free buffer ino the store slot.  Zero the length of the
 * new store buffer.  Descriptor lock should be held. Hold buffer must
 * not be marked "in use".
 */
#define	ROTATE_BUFFERS(d)	do {					\
	(d)->bd_hbuf = (d)->bd_sbuf;					\
	(d)->bd_hlen = (d)->bd_slen;					\
	(d)->bd_sbuf = (d)->bd_fbuf;					\
	(d)->bd_slen = 0;						\
	(d)->bd_fbuf = NULL;						\
	bpf_bufheld(d);							\
} while (0)

/*
 * Descriptor associated with each attached hardware interface.
 * FIXME: this structure is exposed to external callers to speed up
 * bpf_peers_present() call. However we cover all fields not needed by
 * this function via BPF_INTERNAL define
 */
struct bpf_if {
	LIST_ENTRY(bpf_if)	bif_next;	/* list of all interfaces */
	LIST_HEAD(, bpf_d)	bif_dlist;	/* descriptor list */
#ifdef BPF_INTERNAL
	u_int bif_dlt;				/* link layer type */
	u_int bif_hdrlen;		/* length of link header */
	struct ifnet *bif_ifp;		/* corresponding interface */
	struct rwlock bif_lock;		/* interface lock */
	LIST_HEAD(, bpf_d)	bif_wlist;	/* writer-only list */
	int flags;			/* Interface flags */
#endif
};

void	 bpf_bufheld(struct bpf_d *d);
int	 bpf_validate(const struct bpf_insn *, int);
void	 bpf_tap(struct bpf_if *, u_char *, u_int);
void	 bpf_mtap(struct bpf_if *, struct mbuf *);
void	 bpf_mtap2(struct bpf_if *, void *, u_int, struct mbuf *);
void	 bpfattach(struct ifnet *, u_int, u_int);
void	 bpfattach2(struct ifnet *, u_int, u_int, struct bpf_if **);
void	 bpfdetach(struct ifnet *);

void	 bpfilterattach(int);
u_int	 bpf_filter(const struct bpf_insn *, u_char *, u_int, u_int);

static __inline int
bpf_peers_present(struct bpf_if *bpf)
{

	if (!LIST_EMPTY(&bpf->bif_dlist))
		return (1);
	return (0);
}

#define	BPF_TAP(_ifp,_pkt,_pktlen) do {				\
	if (bpf_peers_present((_ifp)->if_bpf))			\
		bpf_tap((_ifp)->if_bpf, (_pkt), (_pktlen));	\
} while (0)
#define	BPF_MTAP(_ifp,_m) do {					\
	if (bpf_peers_present((_ifp)->if_bpf)) {		\
		M_ASSERTVALID(_m);				\
		bpf_mtap((_ifp)->if_bpf, (_m));			\
	}							\
} while (0)
#define	BPF_MTAP2(_ifp,_data,_dlen,_m) do {			\
	if (bpf_peers_present((_ifp)->if_bpf)) {		\
		M_ASSERTVALID(_m);				\
		bpf_mtap2((_ifp)->if_bpf,(_data),(_dlen),(_m));	\
	}							\
} while (0)
#endif

/*
 * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
 */
#define BPF_MEMWORDS 16

#ifdef _SYS_EVENTHANDLER_H_
/* BPF attach/detach events */
struct ifnet;
typedef void (*bpf_track_fn)(void *, struct ifnet *, int /* dlt */,
    int /* 1 =>'s attach */);
EVENTHANDLER_DECLARE(bpf_track, bpf_track_fn);
#endif /* _SYS_EVENTHANDLER_H_ */

#endif /* _NET_BPF_H_ */