freebsd-skq/sys/netinet6/mld6.c

3308 lines
88 KiB
C
Raw Normal View History

/*-
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Copyright (c) 2009 Bruce Simpson.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
2007-12-10 16:03:40 +00:00
*
* $KAME: mld6.c,v 1.27 2001/04/04 05:17:30 itojun Exp $
*/
/*-
* Copyright (c) 1988 Stephen Deering.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Stephen Deering of Stanford University.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)igmp.c 8.1 (Berkeley) 7/19/93
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/protosw.h>
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#include <sys/sysctl.h>
#include <sys/kernel.h>
#include <sys/callout.h>
#include <sys/malloc.h>
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#include <sys/module.h>
#include <sys/ktr.h>
#include <net/if.h>
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#include <net/route.h>
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet6/in6_var.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet6/scope6_var.h>
#include <netinet/icmp6.h>
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#include <netinet6/mld6.h>
#include <netinet6/mld6_var.h>
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#include <security/mac/mac_framework.h>
#ifndef KTR_MLD
#define KTR_MLD KTR_INET6
#endif
static struct mld_ifinfo *
mli_alloc_locked(struct ifnet *);
static void mli_delete_locked(const struct ifnet *);
static void mld_dispatch_packet(struct mbuf *);
static void mld_dispatch_queue(struct ifqueue *, int);
static void mld_final_leave(struct in6_multi *, struct mld_ifinfo *);
static void mld_fasttimo_vnet(void);
static int mld_handle_state_change(struct in6_multi *,
struct mld_ifinfo *);
static int mld_initial_join(struct in6_multi *, struct mld_ifinfo *,
const int);
#ifdef KTR
static char * mld_rec_type_to_str(const int);
#endif
static void mld_set_version(struct mld_ifinfo *, const int);
static void mld_slowtimo_vnet(void);
static int mld_v1_input_query(struct ifnet *, const struct ip6_hdr *,
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*const*/ struct mld_hdr *);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static int mld_v1_input_report(struct ifnet *, const struct ip6_hdr *,
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*const*/ struct mld_hdr *);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static void mld_v1_process_group_timer(struct in6_multi *, const int);
static void mld_v1_process_querier_timers(struct mld_ifinfo *);
static int mld_v1_transmit_report(struct in6_multi *, const int);
static void mld_v1_update_group(struct in6_multi *, const int);
static void mld_v2_cancel_link_timers(struct mld_ifinfo *);
static void mld_v2_dispatch_general_query(struct mld_ifinfo *);
static struct mbuf *
mld_v2_encap_report(struct ifnet *, struct mbuf *);
static int mld_v2_enqueue_filter_change(struct ifqueue *,
struct in6_multi *);
static int mld_v2_enqueue_group_record(struct ifqueue *,
struct in6_multi *, const int, const int, const int,
const int);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static int mld_v2_input_query(struct ifnet *, const struct ip6_hdr *,
struct mbuf *, const int, const int);
static int mld_v2_merge_state_changes(struct in6_multi *,
struct ifqueue *);
static void mld_v2_process_group_timers(struct mld_ifinfo *,
struct ifqueue *, struct ifqueue *,
struct in6_multi *, const int);
static int mld_v2_process_group_query(struct in6_multi *,
struct mld_ifinfo *mli, int, struct mbuf *, const int);
static int sysctl_mld_gsr(SYSCTL_HANDLER_ARGS);
static int sysctl_mld_ifinfo(SYSCTL_HANDLER_ARGS);
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Normative references: RFC 2710, RFC 3590, RFC 3810.
*
* Locking:
* * The MLD subsystem lock ends up being system-wide for the moment,
* but could be per-VIMAGE later on.
* * The permitted lock order is: IN6_MULTI_LOCK, MLD_LOCK, IF_ADDR_LOCK.
* Any may be taken independently; if any are held at the same
* time, the above lock order must be followed.
* * IN6_MULTI_LOCK covers in_multi.
* * MLD_LOCK covers per-link state and any global variables in this file.
* * IF_ADDR_LOCK covers if_multiaddrs, which is used for a variety of
* per-link state iterators.
*
* XXX LOR PREVENTION
* A special case for IPv6 is the in6_setscope() routine. ip6_output()
* will not accept an ifp; it wants an embedded scope ID, unlike
* ip_output(), which happily takes the ifp given to it. The embedded
* scope ID is only used by MLD to select the outgoing interface.
*
* During interface attach and detach, MLD will take MLD_LOCK *after*
* the IF_AFDATA_LOCK.
* As in6_setscope() takes IF_AFDATA_LOCK then SCOPE_LOCK, we can't call
* it with MLD_LOCK held without triggering an LOR. A netisr with indirect
* dispatch could work around this, but we'd rather not do that, as it
* can introduce other races.
*
* As such, we exploit the fact that the scope ID is just the interface
* index, and embed it in the IPv6 destination address accordingly.
* This is potentially NOT VALID for MLDv1 reports, as they
* are always sent to the multicast group itself; as MLDv2
* reports are always sent to ff02::16, this is not an issue
* when MLDv2 is in use.
*
* This does not however eliminate the LOR when ip6_output() itself
* calls in6_setscope() internally whilst MLD_LOCK is held. This will
* trigger a LOR warning in WITNESS when the ifnet is detached.
*
* The right answer is probably to make IF_AFDATA_LOCK an rwlock, given
* how it's used across the network stack. Here we're simply exploiting
* the fact that MLD runs at a similar layer in the stack to scope6.c.
*
* VIMAGE:
* * Each in6_multi corresponds to an ifp, and each ifp corresponds
* to a vnet in ifp->if_vnet.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static struct mtx mld_mtx;
MALLOC_DEFINE(M_MLD, "mld", "mld state");
#define MLD_EMBEDSCOPE(pin6, zoneid) \
(pin6)->s6_addr16[1] = htons((zoneid) & 0xFFFF)
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* VIMAGE-wide globals.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
static VNET_DEFINE(struct timeval, mld_gsrdelay) = {10, 0};
static VNET_DEFINE(LIST_HEAD(, mld_ifinfo), mli_head);
static VNET_DEFINE(int, interface_timers_running6);
static VNET_DEFINE(int, state_change_timers_running6);
static VNET_DEFINE(int, current_state_timers_running6);
#define V_mld_gsrdelay VNET(mld_gsrdelay)
#define V_mli_head VNET(mli_head)
#define V_interface_timers_running6 VNET(interface_timers_running6)
#define V_state_change_timers_running6 VNET(state_change_timers_running6)
#define V_current_state_timers_running6 VNET(current_state_timers_running6)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
SYSCTL_DECL(_net_inet6); /* Note: Not in any common header. */
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
SYSCTL_NODE(_net_inet6, OID_AUTO, mld, CTLFLAG_RW, 0,
"IPv6 Multicast Listener Discovery");
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Virtualized sysctls.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
SYSCTL_VNET_PROC(_net_inet6_mld, OID_AUTO, gsrdelay,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE,
&VNET_NAME(mld_gsrdelay.tv_sec), 0, sysctl_mld_gsr, "I",
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
"Rate limit for MLDv2 Group-and-Source queries in seconds");
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Non-virtualized sysctls.
*/
SYSCTL_NODE(_net_inet6_mld, OID_AUTO, ifinfo, CTLFLAG_RD | CTLFLAG_MPSAFE,
sysctl_mld_ifinfo, "Per-interface MLDv2 state");
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
static int mld_v1enable = 1;
SYSCTL_INT(_net_inet6_mld, OID_AUTO, v1enable, CTLFLAG_RW,
&mld_v1enable, 0, "Enable fallback to MLDv1");
TUNABLE_INT("net.inet6.mld.v1enable", &mld_v1enable);
static int mld_use_allow = 1;
SYSCTL_INT(_net_inet6_mld, OID_AUTO, use_allow, CTLFLAG_RW,
&mld_use_allow, 0, "Use ALLOW/BLOCK for RFC 4604 SSM joins/leaves");
TUNABLE_INT("net.inet6.mld.use_allow", &mld_use_allow);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Packed Router Alert option structure declaration.
*/
struct mld_raopt {
struct ip6_hbh hbh;
struct ip6_opt pad;
struct ip6_opt_router ra;
} __packed;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Router Alert hop-by-hop option header.
*/
static struct mld_raopt mld_ra = {
.hbh = { 0, 0 },
.pad = { .ip6o_type = IP6OPT_PADN, 0 },
.ra = {
.ip6or_type = IP6OPT_ROUTER_ALERT,
.ip6or_len = IP6OPT_RTALERT_LEN - 2,
.ip6or_value[0] = ((IP6OPT_RTALERT_MLD >> 8) & 0xFF),
.ip6or_value[1] = (IP6OPT_RTALERT_MLD & 0xFF)
}
};
static struct ip6_pktopts mld_po;
static __inline void
mld_save_context(struct mbuf *m, struct ifnet *ifp)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#ifdef VIMAGE
m->m_pkthdr.header = ifp->if_vnet;
#endif /* VIMAGE */
m->m_pkthdr.flowid = ifp->if_index;
}
static __inline void
mld_scrub_context(struct mbuf *m)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
m->m_pkthdr.header = NULL;
m->m_pkthdr.flowid = 0;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Restore context from a queued output chain.
* Return saved ifindex.
*
* VIMAGE: The assertion is there to make sure that we
* actually called CURVNET_SET() with what's in the mbuf chain.
*/
static __inline uint32_t
mld_restore_context(struct mbuf *m)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#if defined(VIMAGE) && defined(INVARIANTS)
KASSERT(curvnet == m->m_pkthdr.header,
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
("%s: called when curvnet was not restored", __func__));
#endif
return (m->m_pkthdr.flowid);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Retrieve or set threshold between group-source queries in seconds.
*
* VIMAGE: Assume curvnet set by caller.
* SMPng: NOTE: Serialized by MLD lock.
*/
static int
sysctl_mld_gsr(SYSCTL_HANDLER_ARGS)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
int error;
int i;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error)
return (error);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_LOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
i = V_mld_gsrdelay.tv_sec;
error = sysctl_handle_int(oidp, &i, 0, req);
if (error || !req->newptr)
goto out_locked;
if (i < -1 || i >= 60) {
error = EINVAL;
goto out_locked;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR2(KTR_MLD, "change mld_gsrdelay from %d to %d",
V_mld_gsrdelay.tv_sec, i);
V_mld_gsrdelay.tv_sec = i;
out_locked:
MLD_UNLOCK();
return (error);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Expose struct mld_ifinfo to userland, keyed by ifindex.
* For use by ifmcstat(8).
*
* SMPng: NOTE: Does an unlocked ifindex space read.
* VIMAGE: Assume curvnet set by caller. The node handler itself
* is not directly virtualized.
*/
static int
sysctl_mld_ifinfo(SYSCTL_HANDLER_ARGS)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
int *name;
int error;
u_int namelen;
struct ifnet *ifp;
struct mld_ifinfo *mli;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
name = (int *)arg1;
namelen = arg2;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (req->newptr != NULL)
return (EPERM);
if (namelen != 1)
return (EINVAL);
error = sysctl_wire_old_buffer(req, sizeof(struct mld_ifinfo));
if (error)
return (error);
IN6_MULTI_LOCK();
MLD_LOCK();
if (name[0] <= 0 || name[0] > V_if_index) {
error = ENOENT;
goto out_locked;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
error = ENOENT;
ifp = ifnet_byindex(name[0]);
if (ifp == NULL)
goto out_locked;
LIST_FOREACH(mli, &V_mli_head, mli_link) {
if (ifp == mli->mli_ifp) {
error = SYSCTL_OUT(req, mli,
sizeof(struct mld_ifinfo));
break;
}
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
out_locked:
MLD_UNLOCK();
IN6_MULTI_UNLOCK();
return (error);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Dispatch an entire queue of pending packet chains.
* VIMAGE: Assumes the vnet pointer has been set.
*/
static void
mld_dispatch_queue(struct ifqueue *ifq, int limit)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct mbuf *m;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
for (;;) {
_IF_DEQUEUE(ifq, m);
if (m == NULL)
break;
CTR3(KTR_MLD, "%s: dispatch %p from %p", __func__, ifq, m);
mld_dispatch_packet(m);
if (--limit == 0)
break;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
/*
* Filter outgoing MLD report state by group.
*
* Reports are ALWAYS suppressed for ALL-HOSTS (ff02::1)
* and node-local addresses. However, kernel and socket consumers
* always embed the KAME scope ID in the address provided, so strip it
* when performing comparison.
* Note: This is not the same as the *multicast* scope.
*
* Return zero if the given group is one for which MLD reports
* should be suppressed, or non-zero if reports should be issued.
*/
static __inline int
mld_is_addr_reported(const struct in6_addr *addr)
{
KASSERT(IN6_IS_ADDR_MULTICAST(addr), ("%s: not multicast", __func__));
if (IPV6_ADDR_MC_SCOPE(addr) == IPV6_ADDR_SCOPE_NODELOCAL)
return (0);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (IPV6_ADDR_MC_SCOPE(addr) == IPV6_ADDR_SCOPE_LINKLOCAL) {
struct in6_addr tmp = *addr;
in6_clearscope(&tmp);
if (IN6_ARE_ADDR_EQUAL(&tmp, &in6addr_linklocal_allnodes))
return (0);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (1);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Attach MLD when PF_INET6 is attached to an interface.
*
* SMPng: Normally called with IF_AFDATA_LOCK held.
*/
struct mld_ifinfo *
mld_domifattach(struct ifnet *ifp)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct mld_ifinfo *mli;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR3(KTR_MLD, "%s: called for ifp %p(%s)",
__func__, ifp, ifp->if_xname);
MLD_LOCK();
mli = mli_alloc_locked(ifp);
if (!(ifp->if_flags & IFF_MULTICAST))
mli->mli_flags |= MLIF_SILENT;
if (mld_use_allow)
mli->mli_flags |= MLIF_USEALLOW;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_UNLOCK();
return (mli);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* VIMAGE: assume curvnet set by caller.
*/
static struct mld_ifinfo *
mli_alloc_locked(/*const*/ struct ifnet *ifp)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct mld_ifinfo *mli;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_LOCK_ASSERT();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mli = malloc(sizeof(struct mld_ifinfo), M_MLD, M_NOWAIT|M_ZERO);
if (mli == NULL)
goto out;
mli->mli_ifp = ifp;
mli->mli_version = MLD_VERSION_2;
mli->mli_flags = 0;
mli->mli_rv = MLD_RV_INIT;
mli->mli_qi = MLD_QI_INIT;
mli->mli_qri = MLD_QRI_INIT;
mli->mli_uri = MLD_URI_INIT;
SLIST_INIT(&mli->mli_relinmhead);
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Responses to general queries are subject to bounds.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IFQ_SET_MAXLEN(&mli->mli_gq, MLD_MAX_RESPONSE_PACKETS);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
LIST_INSERT_HEAD(&V_mli_head, mli, mli_link);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR2(KTR_MLD, "allocate mld_ifinfo for ifp %p(%s)",
ifp, ifp->if_xname);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
out:
return (mli);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Hook for ifdetach.
*
* NOTE: Some finalization tasks need to run before the protocol domain
* is detached, but also before the link layer does its cleanup.
* Run before link-layer cleanup; cleanup groups, but do not free MLD state.
*
* SMPng: Caller must hold IN6_MULTI_LOCK().
* Must take IF_ADDR_LOCK() to cover if_multiaddrs iterator.
* XXX This routine is also bitten by unlocked ifma_protospec access.
*/
void
mld_ifdetach(struct ifnet *ifp)
{
struct mld_ifinfo *mli;
struct ifmultiaddr *ifma;
struct in6_multi *inm, *tinm;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR3(KTR_MLD, "%s: called for ifp %p(%s)", __func__, ifp,
ifp->if_xname);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mli = MLD_IFINFO(ifp);
if (mli->mli_version == MLD_VERSION_2) {
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_INET6 ||
ifma->ifma_protospec == NULL)
continue;
inm = (struct in6_multi *)ifma->ifma_protospec;
if (inm->in6m_state == MLD_LEAVING_MEMBER) {
SLIST_INSERT_HEAD(&mli->mli_relinmhead,
inm, in6m_nrele);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
in6m_clear_recorded(inm);
}
IF_ADDR_UNLOCK(ifp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
SLIST_FOREACH_SAFE(inm, &mli->mli_relinmhead, in6m_nrele,
tinm) {
SLIST_REMOVE_HEAD(&mli->mli_relinmhead, in6m_nrele);
in6m_release_locked(inm);
}
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_UNLOCK();
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Hook for domifdetach.
* Runs after link-layer cleanup; free MLD state.
*
* SMPng: Normally called with IF_AFDATA_LOCK held.
*/
void
mld_domifdetach(struct ifnet *ifp)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR3(KTR_MLD, "%s: called for ifp %p(%s)",
__func__, ifp, ifp->if_xname);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_LOCK();
mli_delete_locked(ifp);
MLD_UNLOCK();
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static void
mli_delete_locked(const struct ifnet *ifp)
{
struct mld_ifinfo *mli, *tmli;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR3(KTR_MLD, "%s: freeing mld_ifinfo for ifp %p(%s)",
__func__, ifp, ifp->if_xname);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_LOCK_ASSERT();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
LIST_FOREACH_SAFE(mli, &V_mli_head, mli_link, tmli) {
if (mli->mli_ifp == ifp) {
/*
* Free deferred General Query responses.
*/
_IF_DRAIN(&mli->mli_gq);
LIST_REMOVE(mli, mli_link);
KASSERT(SLIST_EMPTY(&mli->mli_relinmhead),
("%s: there are dangling in_multi references",
__func__));
free(mli, M_MLD);
return;
}
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#ifdef INVARIANTS
panic("%s: mld_ifinfo not found for ifp %p\n", __func__, ifp);
#endif
}
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Process a received MLDv1 general or address-specific query.
* Assumes that the query header has been pulled up to sizeof(mld_hdr).
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
*
* NOTE: Can't be fully const correct as we temporarily embed scope ID in
* mld_addr. This is OK as we own the mbuf chain.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static int
mld_v1_input_query(struct ifnet *ifp, const struct ip6_hdr *ip6,
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*const*/ struct mld_hdr *mld)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct ifmultiaddr *ifma;
struct mld_ifinfo *mli;
struct in6_multi *inm;
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
int is_general_query;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
uint16_t timer;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
is_general_query = 0;
if (!mld_v1enable) {
CTR3(KTR_MLD, "ignore v1 query %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &mld->mld_addr),
ifp, ifp->if_xname);
return (0);
}
/*
* RFC3810 Section 6.2: MLD queries must originate from
* a router's link-local address.
*/
if (!IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_src)) {
CTR3(KTR_MLD, "ignore v1 query src %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &ip6->ip6_src),
ifp, ifp->if_xname);
return (0);
}
/*
* Do address field validation upfront before we accept
* the query.
*/
if (IN6_IS_ADDR_UNSPECIFIED(&mld->mld_addr)) {
/*
* MLDv1 General Query.
* If this was not sent to the all-nodes group, ignore it.
*/
struct in6_addr dst;
dst = ip6->ip6_dst;
in6_clearscope(&dst);
if (!IN6_ARE_ADDR_EQUAL(&dst, &in6addr_linklocal_allnodes))
return (EINVAL);
is_general_query = 1;
} else {
/*
* Embed scope ID of receiving interface in MLD query for
* lookup whilst we don't hold other locks.
*/
in6_setscope(&mld->mld_addr, ifp, NULL);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_LOCK();
MLD_LOCK();
IF_ADDR_LOCK(ifp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Switch to MLDv1 host compatibility mode.
*/
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
mli = MLD_IFINFO(ifp);
KASSERT(mli != NULL, ("%s: no mld_ifinfo for ifp %p", __func__, ifp));
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mld_set_version(mli, MLD_VERSION_1);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
timer = (ntohs(mld->mld_maxdelay) * PR_FASTHZ) / MLD_TIMER_SCALE;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (timer == 0)
timer = 1;
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
if (is_general_query) {
/*
* For each reporting group joined on this
* interface, kick the report timer.
*/
CTR2(KTR_MLD, "process v1 general query on ifp %p(%s)",
ifp, ifp->if_xname);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_INET6 ||
ifma->ifma_protospec == NULL)
continue;
inm = (struct in6_multi *)ifma->ifma_protospec;
mld_v1_update_group(inm, timer);
}
} else {
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* MLDv1 Group-Specific Query.
* If this is a group-specific MLDv1 query, we need only
* look up the single group to process it.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
inm = in6m_lookup_locked(ifp, &mld->mld_addr);
if (inm != NULL) {
CTR3(KTR_MLD, "process v1 query %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &mld->mld_addr),
ifp, ifp->if_xname);
mld_v1_update_group(inm, timer);
}
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/* XXX Clear embedded scope ID as userland won't expect it. */
in6_clearscope(&mld->mld_addr);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IF_ADDR_UNLOCK(ifp);
MLD_UNLOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_UNLOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (0);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Update the report timer on a group in response to an MLDv1 query.
*
* If we are becoming the reporting member for this group, start the timer.
* If we already are the reporting member for this group, and timer is
* below the threshold, reset it.
*
* We may be updating the group for the first time since we switched
* to MLDv2. If we are, then we must clear any recorded source lists,
* and transition to REPORTING state; the group timer is overloaded
* for group and group-source query responses.
*
* Unlike MLDv2, the delay per group should be jittered
* to avoid bursts of MLDv1 reports.
*/
static void
mld_v1_update_group(struct in6_multi *inm, const int timer)
{
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR4(KTR_MLD, "%s: %s/%s timer=%d", __func__,
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname, timer);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_LOCK_ASSERT();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
break;
case MLD_REPORTING_MEMBER:
if (inm->in6m_timer != 0 &&
inm->in6m_timer <= timer) {
CTR1(KTR_MLD, "%s: REPORTING and timer running, "
"skipping.", __func__);
break;
}
/* FALLTHROUGH */
case MLD_SG_QUERY_PENDING_MEMBER:
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_LAZY_MEMBER:
case MLD_AWAKENING_MEMBER:
CTR1(KTR_MLD, "%s: ->REPORTING", __func__);
inm->in6m_state = MLD_REPORTING_MEMBER;
inm->in6m_timer = MLD_RANDOM_DELAY(timer);
V_current_state_timers_running6 = 1;
break;
case MLD_SLEEPING_MEMBER:
CTR1(KTR_MLD, "%s: ->AWAKENING", __func__);
inm->in6m_state = MLD_AWAKENING_MEMBER;
break;
case MLD_LEAVING_MEMBER:
break;
}
}
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Process a received MLDv2 general, group-specific or
* group-and-source-specific query.
*
* Assumes that the query header has been pulled up to sizeof(mldv2_query).
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Return 0 if successful, otherwise an appropriate error code is returned.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static int
mld_v2_input_query(struct ifnet *ifp, const struct ip6_hdr *ip6,
struct mbuf *m, const int off, const int icmp6len)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct mld_ifinfo *mli;
struct mldv2_query *mld;
struct in6_multi *inm;
uint32_t maxdelay, nsrc, qqi;
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
int is_general_query;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
uint16_t timer;
uint8_t qrv;
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
is_general_query = 0;
/*
* RFC3810 Section 6.2: MLD queries must originate from
* a router's link-local address.
*/
if (!IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_src)) {
CTR3(KTR_MLD, "ignore v1 query src %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &ip6->ip6_src),
ifp, ifp->if_xname);
return (0);
}
CTR2(KTR_MLD, "input v2 query on ifp %p(%s)", ifp, ifp->if_xname);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mld = (struct mldv2_query *)(mtod(m, uint8_t *) + off);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
maxdelay = ntohs(mld->mld_maxdelay); /* in 1/10ths of a second */
if (maxdelay >= 32678) {
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
maxdelay = (MLD_MRC_MANT(maxdelay) | 0x1000) <<
(MLD_MRC_EXP(maxdelay) + 3);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
timer = (maxdelay * PR_FASTHZ) / MLD_TIMER_SCALE;
if (timer == 0)
timer = 1;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
qrv = MLD_QRV(mld->mld_misc);
if (qrv < 2) {
CTR3(KTR_MLD, "%s: clamping qrv %d to %d", __func__,
qrv, MLD_RV_INIT);
qrv = MLD_RV_INIT;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
qqi = mld->mld_qqi;
if (qqi >= 128) {
qqi = MLD_QQIC_MANT(mld->mld_qqi) <<
(MLD_QQIC_EXP(mld->mld_qqi) + 3);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
nsrc = ntohs(mld->mld_numsrc);
if (nsrc > MLD_MAX_GS_SOURCES)
return (EMSGSIZE);
if (icmp6len < sizeof(struct mldv2_query) +
(nsrc * sizeof(struct in6_addr)))
return (EMSGSIZE);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* Do further input validation upfront to avoid resetting timers
* should we need to discard this query.
*/
if (IN6_IS_ADDR_UNSPECIFIED(&mld->mld_addr)) {
/*
* General Queries SHOULD be directed to ff02::1.
* A general query with a source list has undefined
* behaviour; discard it.
*/
struct in6_addr dst;
dst = ip6->ip6_dst;
in6_clearscope(&dst);
if (!IN6_ARE_ADDR_EQUAL(&dst, &in6addr_linklocal_allnodes) ||
nsrc > 0)
return (EINVAL);
is_general_query = 1;
} else {
/*
* Embed scope ID of receiving interface in MLD query for
* lookup whilst we don't hold other locks (due to KAME
* locking lameness). We own this mbuf chain just now.
*/
in6_setscope(&mld->mld_addr, ifp, NULL);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_LOCK();
MLD_LOCK();
IF_ADDR_LOCK(ifp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mli = MLD_IFINFO(ifp);
KASSERT(mli != NULL, ("%s: no mld_ifinfo for ifp %p", __func__, ifp));
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* Discard the v2 query if we're in Compatibility Mode.
* The RFC is pretty clear that hosts need to stay in MLDv1 mode
* until the Old Version Querier Present timer expires.
*/
if (mli->mli_version != MLD_VERSION_2)
goto out_locked;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
mld_set_version(mli, MLD_VERSION_2);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mli->mli_rv = qrv;
mli->mli_qi = qqi;
mli->mli_qri = maxdelay;
CTR4(KTR_MLD, "%s: qrv %d qi %d maxdelay %d", __func__, qrv, qqi,
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
maxdelay);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
if (is_general_query) {
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* MLDv2 General Query.
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Schedule a current-state report on this ifp for
* all groups, possibly containing source lists.
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* If there is a pending General Query response
* scheduled earlier than the selected delay, do
* not schedule any other reports.
* Otherwise, reset the interface timer.
*/
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
CTR2(KTR_MLD, "process v2 general query on ifp %p(%s)",
ifp, ifp->if_xname);
if (mli->mli_v2_timer == 0 || mli->mli_v2_timer >= timer) {
mli->mli_v2_timer = MLD_RANDOM_DELAY(timer);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
V_interface_timers_running6 = 1;
}
} else {
/*
* MLDv2 Group-specific or Group-and-source-specific Query.
*
* Group-source-specific queries are throttled on
* a per-group basis to defeat denial-of-service attempts.
* Queries for groups we are not a member of on this
* link are simply ignored.
*/
inm = in6m_lookup_locked(ifp, &mld->mld_addr);
if (inm == NULL)
goto out_locked;
if (nsrc > 0) {
if (!ratecheck(&inm->in6m_lastgsrtv,
&V_mld_gsrdelay)) {
CTR1(KTR_MLD, "%s: GS query throttled.",
__func__);
goto out_locked;
}
}
CTR2(KTR_MLD, "process v2 group query on ifp %p(%s)",
ifp, ifp->if_xname);
/*
* If there is a pending General Query response
* scheduled sooner than the selected delay, no
* further report need be scheduled.
* Otherwise, prepare to respond to the
* group-specific or group-and-source query.
*/
if (mli->mli_v2_timer == 0 || mli->mli_v2_timer >= timer)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mld_v2_process_group_query(inm, mli, timer, m, off);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/* XXX Clear embedded scope ID as userland won't expect it. */
in6_clearscope(&mld->mld_addr);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
out_locked:
IF_ADDR_UNLOCK(ifp);
MLD_UNLOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_UNLOCK();
return (0);
}
/*
* Process a recieved MLDv2 group-specific or group-and-source-specific
* query.
* Return <0 if any error occured. Currently this is ignored.
*/
static int
mld_v2_process_group_query(struct in6_multi *inm, struct mld_ifinfo *mli,
int timer, struct mbuf *m0, const int off)
{
struct mldv2_query *mld;
int retval;
uint16_t nsrc;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
retval = 0;
mld = (struct mldv2_query *)(mtod(m0, uint8_t *) + off);
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
case MLD_SLEEPING_MEMBER:
case MLD_LAZY_MEMBER:
case MLD_AWAKENING_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_LEAVING_MEMBER:
return (retval);
break;
case MLD_REPORTING_MEMBER:
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
break;
}
nsrc = ntohs(mld->mld_numsrc);
/*
* Deal with group-specific queries upfront.
* If any group query is already pending, purge any recorded
* source-list state if it exists, and schedule a query response
* for this group-specific query.
*/
if (nsrc == 0) {
if (inm->in6m_state == MLD_G_QUERY_PENDING_MEMBER ||
inm->in6m_state == MLD_SG_QUERY_PENDING_MEMBER) {
in6m_clear_recorded(inm);
timer = min(inm->in6m_timer, timer);
}
inm->in6m_state = MLD_G_QUERY_PENDING_MEMBER;
inm->in6m_timer = MLD_RANDOM_DELAY(timer);
V_current_state_timers_running6 = 1;
return (retval);
}
/*
* Deal with the case where a group-and-source-specific query has
* been received but a group-specific query is already pending.
*/
if (inm->in6m_state == MLD_G_QUERY_PENDING_MEMBER) {
timer = min(inm->in6m_timer, timer);
inm->in6m_timer = MLD_RANDOM_DELAY(timer);
V_current_state_timers_running6 = 1;
return (retval);
}
/*
* Finally, deal with the case where a group-and-source-specific
* query has been received, where a response to a previous g-s-r
* query exists, or none exists.
* In this case, we need to parse the source-list which the Querier
* has provided us with and check if we have any source list filter
* entries at T1 for these sources. If we do not, there is no need
* schedule a report and the query may be dropped.
* If we do, we must record them and schedule a current-state
* report for those sources.
*/
if (inm->in6m_nsrc > 0) {
struct mbuf *m;
uint8_t *sp;
int i, nrecorded;
int soff;
m = m0;
soff = off + sizeof(struct mldv2_query);
nrecorded = 0;
for (i = 0; i < nsrc; i++) {
sp = mtod(m, uint8_t *) + soff;
retval = in6m_record_source(inm,
(const struct in6_addr *)sp);
if (retval < 0)
break;
nrecorded += retval;
soff += sizeof(struct in6_addr);
if (soff >= m->m_len) {
soff = soff - m->m_len;
m = m->m_next;
if (m == NULL)
break;
}
}
if (nrecorded > 0) {
CTR1(KTR_MLD,
"%s: schedule response to SG query", __func__);
inm->in6m_state = MLD_SG_QUERY_PENDING_MEMBER;
inm->in6m_timer = MLD_RANDOM_DELAY(timer);
V_current_state_timers_running6 = 1;
}
}
return (retval);
}
/*
* Process a received MLDv1 host membership report.
* Assumes mld points to mld_hdr in pulled up mbuf chain.
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
*
* NOTE: Can't be fully const correct as we temporarily embed scope ID in
* mld_addr. This is OK as we own the mbuf chain.
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
*/
static int
mld_v1_input_report(struct ifnet *ifp, const struct ip6_hdr *ip6,
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*const*/ struct mld_hdr *mld)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
{
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
struct in6_addr src, dst;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct in6_ifaddr *ia;
struct in6_multi *inm;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
if (!mld_v1enable) {
CTR3(KTR_MLD, "ignore v1 report %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &mld->mld_addr),
ifp, ifp->if_xname);
return (0);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (ifp->if_flags & IFF_LOOPBACK)
return (0);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* MLDv1 reports must originate from a host's link-local address,
* or the unspecified address (when booting).
*/
src = ip6->ip6_src;
in6_clearscope(&src);
if (!IN6_IS_SCOPE_LINKLOCAL(&src) && !IN6_IS_ADDR_UNSPECIFIED(&src)) {
CTR3(KTR_MLD, "ignore v1 query src %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &ip6->ip6_src),
ifp, ifp->if_xname);
return (EINVAL);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* RFC2710 Section 4: MLDv1 reports must pertain to a multicast
* group, and must be directed to the group itself.
*/
dst = ip6->ip6_dst;
in6_clearscope(&dst);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
if (!IN6_IS_ADDR_MULTICAST(&mld->mld_addr) ||
!IN6_ARE_ADDR_EQUAL(&mld->mld_addr, &dst)) {
CTR3(KTR_MLD, "ignore v1 query dst %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &ip6->ip6_dst),
ifp, ifp->if_xname);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (EINVAL);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Make sure we don't hear our own membership report, as fast
* leave requires knowing that we are the only member of a
* group. Assume we used the link-local address if available,
* otherwise look for ::.
*
* XXX Note that scope ID comparison is needed for the address
* returned by in6ifa_ifpforlinklocal(), but SHOULD NOT be
* performed for the on-wire address.
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
*/
ia = in6ifa_ifpforlinklocal(ifp, IN6_IFF_NOTREADY|IN6_IFF_ANYCAST);
if ((ia && IN6_ARE_ADDR_EQUAL(&ip6->ip6_src, IA6_IN6(ia))) ||
(ia == NULL && IN6_IS_ADDR_UNSPECIFIED(&src))) {
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (0);
}
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR3(KTR_MLD, "process v1 report %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &mld->mld_addr), ifp, ifp->if_xname);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* Embed scope ID of receiving interface in MLD query for lookup
* whilst we don't hold other locks (due to KAME locking lameness).
*/
if (!IN6_IS_ADDR_UNSPECIFIED(&mld->mld_addr))
in6_setscope(&mld->mld_addr, ifp, NULL);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IN6_MULTI_LOCK();
MLD_LOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IF_ADDR_LOCK(ifp);
/*
* MLDv1 report suppression.
* If we are a member of this group, and our membership should be
* reported, and our group timer is pending or about to be reset,
* stop our group timer by transitioning to the 'lazy' state.
*/
inm = in6m_lookup_locked(ifp, &mld->mld_addr);
if (inm != NULL) {
struct mld_ifinfo *mli;
mli = inm->in6m_mli;
KASSERT(mli != NULL,
("%s: no mli for ifp %p", __func__, ifp));
/*
* If we are in MLDv2 host mode, do not allow the
* other host's MLDv1 report to suppress our reports.
*/
if (mli->mli_version == MLD_VERSION_2)
goto out_locked;
inm->in6m_timer = 0;
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
case MLD_SLEEPING_MEMBER:
break;
case MLD_REPORTING_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_AWAKENING_MEMBER:
CTR3(KTR_MLD,
"report suppressed for %s on ifp %p(%s)",
ip6_sprintf(ip6tbuf, &mld->mld_addr),
ifp, ifp->if_xname);
case MLD_LAZY_MEMBER:
inm->in6m_state = MLD_LAZY_MEMBER;
break;
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
case MLD_LEAVING_MEMBER:
break;
}
}
out_locked:
MLD_UNLOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
IF_ADDR_UNLOCK(ifp);
IN6_MULTI_UNLOCK();
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/* XXX Clear embedded scope ID as userland won't expect it. */
in6_clearscope(&mld->mld_addr);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (0);
}
/*
* MLD input path.
*
* Assume query messages which fit in a single ICMPv6 message header
* have been pulled up.
* Assume that userland will want to see the message, even if it
* otherwise fails kernel input validation; do not free it.
* Pullup may however free the mbuf chain m if it fails.
*
* Return IPPROTO_DONE if we freed m. Otherwise, return 0.
*/
int
mld_input(struct mbuf *m, int off, int icmp6len)
{
struct ifnet *ifp;
struct ip6_hdr *ip6;
struct mld_hdr *mld;
int mldlen;
CTR3(KTR_MLD, "%s: called w/mbuf (%p,%d)", __func__, m, off);
ifp = m->m_pkthdr.rcvif;
ip6 = mtod(m, struct ip6_hdr *);
/* Pullup to appropriate size. */
mld = (struct mld_hdr *)(mtod(m, uint8_t *) + off);
if (mld->mld_type == MLD_LISTENER_QUERY &&
icmp6len >= sizeof(struct mldv2_query)) {
mldlen = sizeof(struct mldv2_query);
} else {
mldlen = sizeof(struct mld_hdr);
}
IP6_EXTHDR_GET(mld, struct mld_hdr *, m, off, mldlen);
if (mld == NULL) {
ICMP6STAT_INC(icp6s_badlen);
return (IPPROTO_DONE);
}
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* Userland needs to see all of this traffic for implementing
* the endpoint discovery portion of multicast routing.
*/
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
switch (mld->mld_type) {
case MLD_LISTENER_QUERY:
icmp6_ifstat_inc(ifp, ifs6_in_mldquery);
if (icmp6len == sizeof(struct mld_hdr)) {
if (mld_v1_input_query(ifp, ip6, mld) != 0)
return (0);
} else if (icmp6len >= sizeof(struct mldv2_query)) {
if (mld_v2_input_query(ifp, ip6, m, off,
icmp6len) != 0)
return (0);
}
break;
case MLD_LISTENER_REPORT:
icmp6_ifstat_inc(ifp, ifs6_in_mldreport);
if (mld_v1_input_report(ifp, ip6, mld) != 0)
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
return (0);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
break;
case MLDV2_LISTENER_REPORT:
icmp6_ifstat_inc(ifp, ifs6_in_mldreport);
break;
case MLD_LISTENER_DONE:
icmp6_ifstat_inc(ifp, ifs6_in_mlddone);
break;
default:
break;
}
return (0);
}
/*
* Fast timeout handler (global).
* VIMAGE: Timeout handlers are expected to service all vimages.
*/
void
mld_fasttimo(void)
{
VNET_ITERATOR_DECL(vnet_iter);
VNET_LIST_RLOCK_NOSLEEP();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
VNET_FOREACH(vnet_iter) {
CURVNET_SET(vnet_iter);
mld_fasttimo_vnet();
CURVNET_RESTORE();
}
VNET_LIST_RUNLOCK_NOSLEEP();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
/*
* Fast timeout handler (per-vnet).
*
* VIMAGE: Assume caller has set up our curvnet.
*/
static void
mld_fasttimo_vnet(void)
{
struct ifqueue scq; /* State-change packets */
struct ifqueue qrq; /* Query response packets */
struct ifnet *ifp;
struct mld_ifinfo *mli;
struct ifmultiaddr *ifma, *tifma;
struct in6_multi *inm;
int uri_fasthz;
uri_fasthz = 0;
/*
* Quick check to see if any work needs to be done, in order to
* minimize the overhead of fasttimo processing.
* SMPng: XXX Unlocked reads.
*/
if (!V_current_state_timers_running6 &&
!V_interface_timers_running6 &&
!V_state_change_timers_running6)
return;
IN6_MULTI_LOCK();
MLD_LOCK();
/*
* MLDv2 General Query response timer processing.
*/
if (V_interface_timers_running6) {
CTR1(KTR_MLD, "%s: interface timers running", __func__);
V_interface_timers_running6 = 0;
LIST_FOREACH(mli, &V_mli_head, mli_link) {
if (mli->mli_v2_timer == 0) {
/* Do nothing. */
} else if (--mli->mli_v2_timer == 0) {
mld_v2_dispatch_general_query(mli);
} else {
V_interface_timers_running6 = 1;
}
}
}
if (!V_current_state_timers_running6 &&
!V_state_change_timers_running6)
goto out_locked;
V_current_state_timers_running6 = 0;
V_state_change_timers_running6 = 0;
CTR1(KTR_MLD, "%s: state change timers running", __func__);
/*
* MLD host report and state-change timer processing.
* Note: Processing a v2 group timer may remove a node.
*/
LIST_FOREACH(mli, &V_mli_head, mli_link) {
ifp = mli->mli_ifp;
if (mli->mli_version == MLD_VERSION_2) {
uri_fasthz = MLD_RANDOM_DELAY(mli->mli_uri *
PR_FASTHZ);
memset(&qrq, 0, sizeof(struct ifqueue));
IFQ_SET_MAXLEN(&qrq, MLD_MAX_G_GS_PACKETS);
memset(&scq, 0, sizeof(struct ifqueue));
IFQ_SET_MAXLEN(&scq, MLD_MAX_STATE_CHANGE_PACKETS);
}
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH_SAFE(ifma, &ifp->if_multiaddrs, ifma_link,
tifma) {
if (ifma->ifma_addr->sa_family != AF_INET6 ||
ifma->ifma_protospec == NULL)
continue;
inm = (struct in6_multi *)ifma->ifma_protospec;
switch (mli->mli_version) {
case MLD_VERSION_1:
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
/*
* XXX Drop IF_ADDR lock temporarily to
* avoid recursion caused by a potential
* call by in6ifa_ifpforlinklocal().
* rwlock candidate?
*/
IF_ADDR_UNLOCK(ifp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
mld_v1_process_group_timer(inm,
mli->mli_version);
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
IF_ADDR_LOCK(ifp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
break;
case MLD_VERSION_2:
mld_v2_process_group_timers(mli, &qrq,
&scq, inm, uri_fasthz);
break;
}
}
IF_ADDR_UNLOCK(ifp);
if (mli->mli_version == MLD_VERSION_2) {
struct in6_multi *tinm;
mld_dispatch_queue(&qrq, 0);
mld_dispatch_queue(&scq, 0);
/*
* Free the in_multi reference(s) for
* this lifecycle.
*/
SLIST_FOREACH_SAFE(inm, &mli->mli_relinmhead,
in6m_nrele, tinm) {
SLIST_REMOVE_HEAD(&mli->mli_relinmhead,
in6m_nrele);
in6m_release_locked(inm);
}
}
}
out_locked:
MLD_UNLOCK();
IN6_MULTI_UNLOCK();
}
/*
* Update host report group timer.
* Will update the global pending timer flags.
*/
static void
mld_v1_process_group_timer(struct in6_multi *inm, const int version)
{
int report_timer_expired;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
if (inm->in6m_timer == 0) {
report_timer_expired = 0;
} else if (--inm->in6m_timer == 0) {
report_timer_expired = 1;
} else {
V_current_state_timers_running6 = 1;
return;
}
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_LAZY_MEMBER:
case MLD_SLEEPING_MEMBER:
case MLD_AWAKENING_MEMBER:
break;
case MLD_REPORTING_MEMBER:
if (report_timer_expired) {
inm->in6m_state = MLD_IDLE_MEMBER;
(void)mld_v1_transmit_report(inm,
MLD_LISTENER_REPORT);
}
break;
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
case MLD_LEAVING_MEMBER:
break;
}
}
/*
* Update a group's timers for MLDv2.
* Will update the global pending timer flags.
* Note: Unlocked read from mli.
*/
static void
mld_v2_process_group_timers(struct mld_ifinfo *mli,
struct ifqueue *qrq, struct ifqueue *scq,
struct in6_multi *inm, const int uri_fasthz)
{
int query_response_timer_expired;
int state_change_retransmit_timer_expired;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
query_response_timer_expired = 0;
state_change_retransmit_timer_expired = 0;
/*
* During a transition from compatibility mode back to MLDv2,
* a group record in REPORTING state may still have its group
* timer active. This is a no-op in this function; it is easier
* to deal with it here than to complicate the slow-timeout path.
*/
if (inm->in6m_timer == 0) {
query_response_timer_expired = 0;
} else if (--inm->in6m_timer == 0) {
query_response_timer_expired = 1;
} else {
V_current_state_timers_running6 = 1;
}
if (inm->in6m_sctimer == 0) {
state_change_retransmit_timer_expired = 0;
} else if (--inm->in6m_sctimer == 0) {
state_change_retransmit_timer_expired = 1;
} else {
V_state_change_timers_running6 = 1;
}
/* We are in fasttimo, so be quick about it. */
if (!state_change_retransmit_timer_expired &&
!query_response_timer_expired)
return;
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
case MLD_SLEEPING_MEMBER:
case MLD_LAZY_MEMBER:
case MLD_AWAKENING_MEMBER:
case MLD_IDLE_MEMBER:
break;
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
/*
* Respond to a previously pending Group-Specific
* or Group-and-Source-Specific query by enqueueing
* the appropriate Current-State report for
* immediate transmission.
*/
if (query_response_timer_expired) {
int retval;
retval = mld_v2_enqueue_group_record(qrq, inm, 0, 1,
(inm->in6m_state == MLD_SG_QUERY_PENDING_MEMBER),
0);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR2(KTR_MLD, "%s: enqueue record = %d",
__func__, retval);
inm->in6m_state = MLD_REPORTING_MEMBER;
in6m_clear_recorded(inm);
}
/* FALLTHROUGH */
case MLD_REPORTING_MEMBER:
case MLD_LEAVING_MEMBER:
if (state_change_retransmit_timer_expired) {
/*
* State-change retransmission timer fired.
* If there are any further pending retransmissions,
* set the global pending state-change flag, and
* reset the timer.
*/
if (--inm->in6m_scrv > 0) {
inm->in6m_sctimer = uri_fasthz;
V_state_change_timers_running6 = 1;
}
/*
* Retransmit the previously computed state-change
* report. If there are no further pending
* retransmissions, the mbuf queue will be consumed.
* Update T0 state to T1 as we have now sent
* a state-change.
*/
(void)mld_v2_merge_state_changes(inm, scq);
in6m_commit(inm);
CTR3(KTR_MLD, "%s: T1 -> T0 for %s/%s", __func__,
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname);
/*
* If we are leaving the group for good, make sure
* we release MLD's reference to it.
* This release must be deferred using a SLIST,
* as we are called from a loop which traverses
* the in_ifmultiaddr TAILQ.
*/
if (inm->in6m_state == MLD_LEAVING_MEMBER &&
inm->in6m_scrv == 0) {
inm->in6m_state = MLD_NOT_MEMBER;
SLIST_INSERT_HEAD(&mli->mli_relinmhead,
inm, in6m_nrele);
}
}
break;
}
}
/*
* Switch to a different version on the given interface,
* as per Section 9.12.
*/
static void
mld_set_version(struct mld_ifinfo *mli, const int version)
{
int old_version_timer;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MLD_LOCK_ASSERT();
CTR4(KTR_MLD, "%s: switching to v%d on ifp %p(%s)", __func__,
version, mli->mli_ifp, mli->mli_ifp->if_xname);
if (version == MLD_VERSION_1) {
/*
* Compute the "Older Version Querier Present" timer as per
* Section 9.12.
*/
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
old_version_timer = (mli->mli_rv * mli->mli_qi) + mli->mli_qri;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
old_version_timer *= PR_SLOWHZ;
mli->mli_v1_timer = old_version_timer;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
if (mli->mli_v1_timer > 0 && mli->mli_version != MLD_VERSION_1) {
mli->mli_version = MLD_VERSION_1;
mld_v2_cancel_link_timers(mli);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
}
/*
* Cancel pending MLDv2 timers for the given link and all groups
* joined on it; state-change, general-query, and group-query timers.
*/
static void
mld_v2_cancel_link_timers(struct mld_ifinfo *mli)
{
struct ifmultiaddr *ifma;
struct ifnet *ifp;
struct in6_multi *inm;
CTR3(KTR_MLD, "%s: cancel v2 timers on ifp %p(%s)", __func__,
mli->mli_ifp, mli->mli_ifp->if_xname);
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
/*
* Fast-track this potentially expensive operation
* by checking all the global 'timer pending' flags.
*/
if (!V_interface_timers_running6 &&
!V_state_change_timers_running6 &&
!V_current_state_timers_running6)
return;
mli->mli_v2_timer = 0;
ifp = mli->mli_ifp;
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_INET6)
continue;
inm = (struct in6_multi *)ifma->ifma_protospec;
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_LAZY_MEMBER:
case MLD_SLEEPING_MEMBER:
case MLD_AWAKENING_MEMBER:
break;
case MLD_LEAVING_MEMBER:
/*
* If we are leaving the group and switching
* version, we need to release the final
* reference held for issuing the INCLUDE {}.
*
* SMPNG: Must drop and re-acquire IF_ADDR_LOCK
* around in6m_release_locked(), as it is not
* a recursive mutex.
*/
IF_ADDR_UNLOCK(ifp);
in6m_release_locked(inm);
IF_ADDR_LOCK(ifp);
/* FALLTHROUGH */
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
in6m_clear_recorded(inm);
/* FALLTHROUGH */
case MLD_REPORTING_MEMBER:
inm->in6m_sctimer = 0;
inm->in6m_timer = 0;
inm->in6m_state = MLD_REPORTING_MEMBER;
/*
* Free any pending MLDv2 state-change records.
*/
_IF_DRAIN(&inm->in6m_scq);
break;
}
}
IF_ADDR_UNLOCK(ifp);
}
/*
* Global slowtimo handler.
* VIMAGE: Timeout handlers are expected to service all vimages.
*/
void
mld_slowtimo(void)
{
VNET_ITERATOR_DECL(vnet_iter);
VNET_LIST_RLOCK_NOSLEEP();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
VNET_FOREACH(vnet_iter) {
CURVNET_SET(vnet_iter);
mld_slowtimo_vnet();
CURVNET_RESTORE();
}
VNET_LIST_RUNLOCK_NOSLEEP();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
/*
* Per-vnet slowtimo handler.
*/
static void
mld_slowtimo_vnet(void)
{
struct mld_ifinfo *mli;
MLD_LOCK();
LIST_FOREACH(mli, &V_mli_head, mli_link) {
mld_v1_process_querier_timers(mli);
}
MLD_UNLOCK();
}
/*
* Update the Older Version Querier Present timers for a link.
* See Section 9.12 of RFC 3810.
*/
static void
mld_v1_process_querier_timers(struct mld_ifinfo *mli)
{
MLD_LOCK_ASSERT();
Merge final round of MLD changes from p4: ip6_input.c, in6.h: * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6. * Always set this flag if HBH Router Alert option is present for MLD, even when not forwarding. icmp6.c: * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent. * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb. * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see IPv6 hop options outside of ip6_input(). in6_mcast.c: * Use KAME scope/zone ID in in6_multi. * Update net.inet6.ip6.mcast.filters implementation to use scope IDs for comparisons. * Fix scope ID treatment in multicast socket option processing. Scope IDs passed in from userland will be ignored as other less ambiguous APIs exist for specifying the link. * Tighten userland input checks in IPv6 SSM delta and full-state ops. * Source filter embedded scope IDs need to be revisited, for now just clear them and ignore them on input. * Adapt KAME behaviour of looking up the scope ID in the default zone for multicast leaves, when the interface is ambiguous. mld6.c: * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2: * ip6_src MAY be the unspecified address for MLDv1 reports. * ip6_src MAY have link-local address scope for MLDv1 reports, MLDv1 queries, and MLDv2 queries. * Perform address field validation *before* accepting queries. * Use KAME scope/zone ID in query/report processing. * Break const correctness for mld_v1_input_report(), mld_v1_input_query() as we temporarily modify the input mbuf chain. * Clear the scope ID before handoff to userland MLD daemon. * Fix MLDv1 old querier present timer processing. With the protocol defaults, hosts should revert to MLDv2 after 260s. * Add net.inet6.mld.v1enable sysctl, default to on. ifmcstat.c: * Use sysctl by default; -K requests kvm(3) if so compiled. mld.4: * Connect man page to build. Tested using PCS.
2009-05-27 18:57:13 +00:00
if (mli->mli_version != MLD_VERSION_2 && --mli->mli_v1_timer == 0) {
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* MLDv1 Querier Present timer expired; revert to MLDv2.
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
*/
CTR5(KTR_MLD,
"%s: transition from v%d -> v%d on %p(%s)",
__func__, mli->mli_version, MLD_VERSION_2,
mli->mli_ifp, mli->mli_ifp->if_xname);
mli->mli_version = MLD_VERSION_2;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
}
/*
* Transmit an MLDv1 report immediately.
*/
static int
mld_v1_transmit_report(struct in6_multi *in6m, const int type)
{
struct ifnet *ifp;
struct in6_ifaddr *ia;
struct ip6_hdr *ip6;
struct mbuf *mh, *md;
struct mld_hdr *mld;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
ifp = in6m->in6m_ifp;
ia = in6ifa_ifpforlinklocal(ifp, IN6_IFF_NOTREADY|IN6_IFF_ANYCAST);
/* ia may be NULL if link-local address is tentative. */
MGETHDR(mh, M_DONTWAIT, MT_HEADER);
if (mh == NULL) {
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (ENOMEM);
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
MGET(md, M_DONTWAIT, MT_DATA);
if (md == NULL) {
m_free(mh);
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (ENOMEM);
}
mh->m_next = md;
/*
* FUTURE: Consider increasing alignment by ETHER_HDR_LEN, so
* that ether_output() does not need to allocate another mbuf
* for the header in the most common case.
*/
MH_ALIGN(mh, sizeof(struct ip6_hdr));
mh->m_pkthdr.len = sizeof(struct ip6_hdr) + sizeof(struct mld_hdr);
mh->m_len = sizeof(struct ip6_hdr);
ip6 = mtod(mh, struct ip6_hdr *);
ip6->ip6_flow = 0;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
ip6->ip6_nxt = IPPROTO_ICMPV6;
ip6->ip6_src = ia ? ia->ia_addr.sin6_addr : in6addr_any;
ip6->ip6_dst = in6m->in6m_addr;
md->m_len = sizeof(struct mld_hdr);
mld = mtod(md, struct mld_hdr *);
mld->mld_type = type;
mld->mld_code = 0;
mld->mld_cksum = 0;
mld->mld_maxdelay = 0;
mld->mld_reserved = 0;
mld->mld_addr = in6m->in6m_addr;
in6_clearscope(&mld->mld_addr);
mld->mld_cksum = in6_cksum(mh, IPPROTO_ICMPV6,
sizeof(struct ip6_hdr), sizeof(struct mld_hdr));
mld_save_context(mh, ifp);
mh->m_flags |= M_MLDV1;
mld_dispatch_packet(mh);
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
return (0);
}
/*
* Process a state change from the upper layer for the given IPv6 group.
*
* Each socket holds a reference on the in_multi in its own ip_moptions.
* The socket layer will have made the necessary updates to.the group
* state, it is now up to MLD to issue a state change report if there
* has been any change between T0 (when the last state-change was issued)
* and T1 (now).
*
* We use the MLDv2 state machine at group level. The MLd module
* however makes the decision as to which MLD protocol version to speak.
* A state change *from* INCLUDE {} always means an initial join.
* A state change *to* INCLUDE {} always means a final leave.
*
* If delay is non-zero, and the state change is an initial multicast
* join, the state change report will be delayed by 'delay' ticks
* in units of PR_FASTHZ if MLDv1 is active on the link; otherwise
* the initial MLDv2 state change report will be delayed by whichever
* is sooner, a pending state-change timer or delay itself.
*
* VIMAGE: curvnet should have been set by caller, as this routine
* is called from the socket option handlers.
*/
int
mld_change_state(struct in6_multi *inm, const int delay)
{
struct mld_ifinfo *mli;
struct ifnet *ifp;
int error;
IN6_MULTI_LOCK_ASSERT();
error = 0;
/*
* Try to detect if the upper layer just asked us to change state
* for an interface which has now gone away.
*/
KASSERT(inm->in6m_ifma != NULL, ("%s: no ifma", __func__));
ifp = inm->in6m_ifma->ifma_ifp;
if (ifp != NULL) {
/*
* Sanity check that netinet6's notion of ifp is the
* same as net's.
*/
KASSERT(inm->in6m_ifp == ifp, ("%s: bad ifp", __func__));
}
MLD_LOCK();
mli = MLD_IFINFO(ifp);
KASSERT(mli != NULL, ("%s: no mld_ifinfo for ifp %p", __func__, ifp));
/*
* If we detect a state transition to or from MCAST_UNDEFINED
* for this group, then we are starting or finishing an MLD
* life cycle for this group.
*/
if (inm->in6m_st[1].iss_fmode != inm->in6m_st[0].iss_fmode) {
CTR3(KTR_MLD, "%s: inm transition %d -> %d", __func__,
inm->in6m_st[0].iss_fmode, inm->in6m_st[1].iss_fmode);
if (inm->in6m_st[0].iss_fmode == MCAST_UNDEFINED) {
CTR1(KTR_MLD, "%s: initial join", __func__);
error = mld_initial_join(inm, mli, delay);
goto out_locked;
} else if (inm->in6m_st[1].iss_fmode == MCAST_UNDEFINED) {
CTR1(KTR_MLD, "%s: final leave", __func__);
mld_final_leave(inm, mli);
goto out_locked;
}
} else {
CTR1(KTR_MLD, "%s: filter set change", __func__);
}
error = mld_handle_state_change(inm, mli);
out_locked:
MLD_UNLOCK();
return (error);
}
/*
* Perform the initial join for an MLD group.
*
* When joining a group:
* If the group should have its MLD traffic suppressed, do nothing.
* MLDv1 starts sending MLDv1 host membership reports.
* MLDv2 will schedule an MLDv2 state-change report containing the
* initial state of the membership.
*
* If the delay argument is non-zero, then we must delay sending the
* initial state change for delay ticks (in units of PR_FASTHZ).
*/
static int
mld_initial_join(struct in6_multi *inm, struct mld_ifinfo *mli,
const int delay)
{
struct ifnet *ifp;
struct ifqueue *ifq;
int error, retval, syncstates;
int odelay;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
CTR4(KTR_MLD, "%s: initial join %s on ifp %p(%s)",
__func__, ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp, inm->in6m_ifp->if_xname);
error = 0;
syncstates = 1;
ifp = inm->in6m_ifp;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
KASSERT(mli && mli->mli_ifp == ifp, ("%s: inconsistent ifp", __func__));
/*
* Groups joined on loopback or marked as 'not reported',
* enter the MLD_SILENT_MEMBER state and
* are never reported in any protocol exchanges.
* All other groups enter the appropriate state machine
* for the version in use on this link.
* A link marked as MLIF_SILENT causes MLD to be completely
* disabled for the link.
*/
if ((ifp->if_flags & IFF_LOOPBACK) ||
(mli->mli_flags & MLIF_SILENT) ||
!mld_is_addr_reported(&inm->in6m_addr)) {
CTR1(KTR_MLD,
"%s: not kicking state machine for silent group", __func__);
inm->in6m_state = MLD_SILENT_MEMBER;
inm->in6m_timer = 0;
} else {
/*
* Deal with overlapping in_multi lifecycle.
* If this group was LEAVING, then make sure
* we drop the reference we picked up to keep the
* group around for the final INCLUDE {} enqueue.
*/
if (mli->mli_version == MLD_VERSION_2 &&
inm->in6m_state == MLD_LEAVING_MEMBER)
in6m_release_locked(inm);
inm->in6m_state = MLD_REPORTING_MEMBER;
switch (mli->mli_version) {
case MLD_VERSION_1:
/*
* If a delay was provided, only use it if
* it is greater than the delay normally
* used for an MLDv1 state change report,
* and delay sending the initial MLDv1 report
* by not transitioning to the IDLE state.
*/
odelay = MLD_RANDOM_DELAY(MLD_V1_MAX_RI * PR_FASTHZ);
if (delay) {
inm->in6m_timer = max(delay, odelay);
V_current_state_timers_running6 = 1;
} else {
inm->in6m_state = MLD_IDLE_MEMBER;
error = mld_v1_transmit_report(inm,
MLD_LISTENER_REPORT);
if (error == 0) {
inm->in6m_timer = odelay;
V_current_state_timers_running6 = 1;
}
}
break;
case MLD_VERSION_2:
/*
* Defer update of T0 to T1, until the first copy
* of the state change has been transmitted.
*/
syncstates = 0;
/*
* Immediately enqueue a State-Change Report for
* this interface, freeing any previous reports.
* Don't kick the timers if there is nothing to do,
* or if an error occurred.
*/
ifq = &inm->in6m_scq;
_IF_DRAIN(ifq);
retval = mld_v2_enqueue_group_record(ifq, inm, 1,
0, 0, (mli->mli_flags & MLIF_USEALLOW));
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR2(KTR_MLD, "%s: enqueue record = %d",
__func__, retval);
if (retval <= 0) {
error = retval * -1;
break;
}
/*
* Schedule transmission of pending state-change
* report up to RV times for this link. The timer
* will fire at the next mld_fasttimo (~200ms),
* giving us an opportunity to merge the reports.
*
* If a delay was provided to this function, only
* use this delay if sooner than the existing one.
*/
KASSERT(mli->mli_rv > 1,
("%s: invalid robustness %d", __func__,
mli->mli_rv));
inm->in6m_scrv = mli->mli_rv;
if (delay) {
if (inm->in6m_sctimer > 1) {
inm->in6m_sctimer =
min(inm->in6m_sctimer, delay);
} else
inm->in6m_sctimer = delay;
} else
inm->in6m_sctimer = 1;
V_state_change_timers_running6 = 1;
error = 0;
break;
}
}
/*
* Only update the T0 state if state change is atomic,
* i.e. we don't need to wait for a timer to fire before we
* can consider the state change to have been communicated.
*/
if (syncstates) {
in6m_commit(inm);
CTR3(KTR_MLD, "%s: T1 -> T0 for %s/%s", __func__,
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname);
}
return (error);
}
/*
* Issue an intermediate state change during the life-cycle.
*/
static int
mld_handle_state_change(struct in6_multi *inm, struct mld_ifinfo *mli)
{
struct ifnet *ifp;
int retval;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
CTR4(KTR_MLD, "%s: state change for %s on ifp %p(%s)",
__func__, ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp, inm->in6m_ifp->if_xname);
ifp = inm->in6m_ifp;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
KASSERT(mli && mli->mli_ifp == ifp,
("%s: inconsistent ifp", __func__));
if ((ifp->if_flags & IFF_LOOPBACK) ||
(mli->mli_flags & MLIF_SILENT) ||
!mld_is_addr_reported(&inm->in6m_addr) ||
(mli->mli_version != MLD_VERSION_2)) {
if (!mld_is_addr_reported(&inm->in6m_addr)) {
CTR1(KTR_MLD,
"%s: not kicking state machine for silent group", __func__);
}
CTR1(KTR_MLD, "%s: nothing to do", __func__);
in6m_commit(inm);
CTR3(KTR_MLD, "%s: T1 -> T0 for %s/%s", __func__,
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname);
return (0);
}
_IF_DRAIN(&inm->in6m_scq);
retval = mld_v2_enqueue_group_record(&inm->in6m_scq, inm, 1, 0, 0,
(mli->mli_flags & MLIF_USEALLOW));
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR2(KTR_MLD, "%s: enqueue record = %d", __func__, retval);
if (retval <= 0)
return (-retval);
/*
* If record(s) were enqueued, start the state-change
* report timer for this group.
*/
inm->in6m_scrv = mli->mli_rv;
inm->in6m_sctimer = 1;
V_state_change_timers_running6 = 1;
return (0);
}
/*
* Perform the final leave for a multicast address.
*
* When leaving a group:
* MLDv1 sends a DONE message, if and only if we are the reporter.
* MLDv2 enqueues a state-change report containing a transition
* to INCLUDE {} for immediate transmission.
*/
static void
mld_final_leave(struct in6_multi *inm, struct mld_ifinfo *mli)
{
int syncstates;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
syncstates = 1;
CTR4(KTR_MLD, "%s: final leave %s on ifp %p(%s)",
__func__, ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp, inm->in6m_ifp->if_xname);
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
case MLD_LEAVING_MEMBER:
/* Already leaving or left; do nothing. */
CTR1(KTR_MLD,
"%s: not kicking state machine for silent group", __func__);
break;
case MLD_REPORTING_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
if (mli->mli_version == MLD_VERSION_1) {
#ifdef INVARIANTS
if (inm->in6m_state == MLD_G_QUERY_PENDING_MEMBER ||
inm->in6m_state == MLD_SG_QUERY_PENDING_MEMBER)
panic("%s: MLDv2 state reached, not MLDv2 mode",
__func__);
#endif
mld_v1_transmit_report(inm, MLD_LISTENER_DONE);
inm->in6m_state = MLD_NOT_MEMBER;
} else if (mli->mli_version == MLD_VERSION_2) {
/*
* Stop group timer and all pending reports.
* Immediately enqueue a state-change report
* TO_IN {} to be sent on the next fast timeout,
* giving us an opportunity to merge reports.
*/
_IF_DRAIN(&inm->in6m_scq);
inm->in6m_timer = 0;
inm->in6m_scrv = mli->mli_rv;
CTR4(KTR_MLD, "%s: Leaving %s/%s with %d "
"pending retransmissions.", __func__,
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname, inm->in6m_scrv);
if (inm->in6m_scrv == 0) {
inm->in6m_state = MLD_NOT_MEMBER;
inm->in6m_sctimer = 0;
} else {
int retval;
in6m_acquire_locked(inm);
retval = mld_v2_enqueue_group_record(
&inm->in6m_scq, inm, 1, 0, 0,
(mli->mli_flags & MLIF_USEALLOW));
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
KASSERT(retval != 0,
("%s: enqueue record = %d", __func__,
retval));
inm->in6m_state = MLD_LEAVING_MEMBER;
inm->in6m_sctimer = 1;
V_state_change_timers_running6 = 1;
syncstates = 0;
}
break;
}
break;
case MLD_LAZY_MEMBER:
case MLD_SLEEPING_MEMBER:
case MLD_AWAKENING_MEMBER:
/* Our reports are suppressed; do nothing. */
break;
}
if (syncstates) {
in6m_commit(inm);
CTR3(KTR_MLD, "%s: T1 -> T0 for %s/%s", __func__,
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname);
inm->in6m_st[1].iss_fmode = MCAST_UNDEFINED;
CTR3(KTR_MLD, "%s: T1 now MCAST_UNDEFINED for %p/%s",
__func__, &inm->in6m_addr, inm->in6m_ifp->if_xname);
}
}
/*
* Enqueue an MLDv2 group record to the given output queue.
*
* If is_state_change is zero, a current-state record is appended.
* If is_state_change is non-zero, a state-change report is appended.
*
* If is_group_query is non-zero, an mbuf packet chain is allocated.
* If is_group_query is zero, and if there is a packet with free space
* at the tail of the queue, it will be appended to providing there
* is enough free space.
* Otherwise a new mbuf packet chain is allocated.
*
* If is_source_query is non-zero, each source is checked to see if
* it was recorded for a Group-Source query, and will be omitted if
* it is not both in-mode and recorded.
*
* If use_block_allow is non-zero, state change reports for initial join
* and final leave, on an inclusive mode group with a source list, will be
* rewritten to use the ALLOW_NEW and BLOCK_OLD record types, respectively.
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* The function will attempt to allocate leading space in the packet
* for the IPv6+ICMP headers to be prepended without fragmenting the chain.
*
* If successful the size of all data appended to the queue is returned,
* otherwise an error code less than zero is returned, or zero if
* no record(s) were appended.
*/
static int
mld_v2_enqueue_group_record(struct ifqueue *ifq, struct in6_multi *inm,
const int is_state_change, const int is_group_query,
const int is_source_query, const int use_block_allow)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
{
struct mldv2_record mr;
struct mldv2_record *pmr;
struct ifnet *ifp;
struct ip6_msource *ims, *nims;
struct mbuf *m0, *m, *md;
int error, is_filter_list_change;
int minrec0len, m0srcs, msrcs, nbytes, off;
int record_has_sources;
int now;
int type;
uint8_t mode;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
IN6_MULTI_LOCK_ASSERT();
error = 0;
ifp = inm->in6m_ifp;
is_filter_list_change = 0;
m = NULL;
m0 = NULL;
m0srcs = 0;
msrcs = 0;
nbytes = 0;
nims = NULL;
record_has_sources = 1;
pmr = NULL;
type = MLD_DO_NOTHING;
mode = inm->in6m_st[1].iss_fmode;
/*
* If we did not transition out of ASM mode during t0->t1,
* and there are no source nodes to process, we can skip
* the generation of source records.
*/
if (inm->in6m_st[0].iss_asm > 0 && inm->in6m_st[1].iss_asm > 0 &&
inm->in6m_nsrc == 0)
record_has_sources = 0;
if (is_state_change) {
/*
* Queue a state change record.
* If the mode did not change, and there are non-ASM
* listeners or source filters present,
* we potentially need to issue two records for the group.
* If there are ASM listeners, and there was no filter
* mode transition of any kind, do nothing.
*
* If we are transitioning to MCAST_UNDEFINED, we need
* not send any sources. A transition to/from this state is
* considered inclusive with some special treatment.
*
* If we are rewriting initial joins/leaves to use
* ALLOW/BLOCK, and the group's membership is inclusive,
* we need to send sources in all cases.
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
*/
if (mode != inm->in6m_st[0].iss_fmode) {
if (mode == MCAST_EXCLUDE) {
CTR1(KTR_MLD, "%s: change to EXCLUDE",
__func__);
type = MLD_CHANGE_TO_EXCLUDE_MODE;
} else {
CTR1(KTR_MLD, "%s: change to INCLUDE",
__func__);
if (use_block_allow) {
/*
* XXX
* Here we're interested in state
* edges either direction between
* MCAST_UNDEFINED and MCAST_INCLUDE.
* Perhaps we should just check
* the group state, rather than
* the filter mode.
*/
if (mode == MCAST_UNDEFINED) {
type = MLD_BLOCK_OLD_SOURCES;
} else {
type = MLD_ALLOW_NEW_SOURCES;
}
} else {
type = MLD_CHANGE_TO_INCLUDE_MODE;
if (mode == MCAST_UNDEFINED)
record_has_sources = 0;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
} else {
if (record_has_sources) {
is_filter_list_change = 1;
} else {
type = MLD_DO_NOTHING;
}
}
} else {
/*
* Queue a current state record.
*/
if (mode == MCAST_EXCLUDE) {
type = MLD_MODE_IS_EXCLUDE;
} else if (mode == MCAST_INCLUDE) {
type = MLD_MODE_IS_INCLUDE;
KASSERT(inm->in6m_st[1].iss_asm == 0,
("%s: inm %p is INCLUDE but ASM count is %d",
__func__, inm, inm->in6m_st[1].iss_asm));
}
}
/*
* Generate the filter list changes using a separate function.
*/
if (is_filter_list_change)
return (mld_v2_enqueue_filter_change(ifq, inm));
if (type == MLD_DO_NOTHING) {
CTR3(KTR_MLD, "%s: nothing to do for %s/%s",
__func__, ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname);
return (0);
}
/*
* If any sources are present, we must be able to fit at least
* one in the trailing space of the tail packet's mbuf,
* ideally more.
*/
minrec0len = sizeof(struct mldv2_record);
if (record_has_sources)
minrec0len += sizeof(struct in6_addr);
CTR4(KTR_MLD, "%s: queueing %s for %s/%s", __func__,
mld_rec_type_to_str(type),
ip6_sprintf(ip6tbuf, &inm->in6m_addr),
inm->in6m_ifp->if_xname);
/*
* Check if we have a packet in the tail of the queue for this
* group into which the first group record for this group will fit.
* Otherwise allocate a new packet.
* Always allocate leading space for IP6+RA+ICMPV6+REPORT.
* Note: Group records for G/GSR query responses MUST be sent
* in their own packet.
*/
m0 = ifq->ifq_tail;
if (!is_group_query &&
m0 != NULL &&
(m0->m_pkthdr.PH_vt.vt_nrecs + 1 <= MLD_V2_REPORT_MAXRECS) &&
(m0->m_pkthdr.len + minrec0len) <
(ifp->if_mtu - MLD_MTUSPACE)) {
m0srcs = (ifp->if_mtu - m0->m_pkthdr.len -
sizeof(struct mldv2_record)) /
sizeof(struct in6_addr);
m = m0;
CTR1(KTR_MLD, "%s: use existing packet", __func__);
} else {
if (_IF_QFULL(ifq)) {
CTR1(KTR_MLD, "%s: outbound queue full", __func__);
return (-ENOMEM);
}
m = NULL;
m0srcs = (ifp->if_mtu - MLD_MTUSPACE -
sizeof(struct mldv2_record)) / sizeof(struct in6_addr);
if (!is_state_change && !is_group_query)
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (m == NULL)
m = m_gethdr(M_DONTWAIT, MT_DATA);
if (m == NULL)
return (-ENOMEM);
mld_save_context(m, ifp);
CTR1(KTR_MLD, "%s: allocated first packet", __func__);
}
/*
* Append group record.
* If we have sources, we don't know how many yet.
*/
mr.mr_type = type;
mr.mr_datalen = 0;
mr.mr_numsrc = 0;
mr.mr_addr = inm->in6m_addr;
in6_clearscope(&mr.mr_addr);
if (!m_append(m, sizeof(struct mldv2_record), (void *)&mr)) {
if (m != m0)
m_freem(m);
CTR1(KTR_MLD, "%s: m_append() failed.", __func__);
return (-ENOMEM);
}
nbytes += sizeof(struct mldv2_record);
/*
* Append as many sources as will fit in the first packet.
* If we are appending to a new packet, the chain allocation
* may potentially use clusters; use m_getptr() in this case.
* If we are appending to an existing packet, we need to obtain
* a pointer to the group record after m_append(), in case a new
* mbuf was allocated.
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Only append sources which are in-mode at t1. If we are
* transitioning to MCAST_UNDEFINED state on the group, and
* use_block_allow is zero, do not include source entries.
* Otherwise, we need to include this source in the report.
*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Only report recorded sources in our filter set when responding
* to a group-source query.
*/
if (record_has_sources) {
if (m == m0) {
md = m_last(m);
pmr = (struct mldv2_record *)(mtod(md, uint8_t *) +
md->m_len - nbytes);
} else {
md = m_getptr(m, 0, &off);
pmr = (struct mldv2_record *)(mtod(md, uint8_t *) +
off);
}
msrcs = 0;
RB_FOREACH_SAFE(ims, ip6_msource_tree, &inm->in6m_srcs,
nims) {
CTR2(KTR_MLD, "%s: visit node %s", __func__,
ip6_sprintf(ip6tbuf, &ims->im6s_addr));
now = im6s_get_mode(inm, ims, 1);
CTR2(KTR_MLD, "%s: node is %d", __func__, now);
if ((now != mode) ||
(now == mode &&
(!use_block_allow && mode == MCAST_UNDEFINED))) {
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR1(KTR_MLD, "%s: skip node", __func__);
continue;
}
if (is_source_query && ims->im6s_stp == 0) {
CTR1(KTR_MLD, "%s: skip unrecorded node",
__func__);
continue;
}
CTR1(KTR_MLD, "%s: append node", __func__);
if (!m_append(m, sizeof(struct in6_addr),
(void *)&ims->im6s_addr)) {
if (m != m0)
m_freem(m);
CTR1(KTR_MLD, "%s: m_append() failed.",
__func__);
return (-ENOMEM);
}
nbytes += sizeof(struct in6_addr);
++msrcs;
if (msrcs == m0srcs)
break;
}
CTR2(KTR_MLD, "%s: msrcs is %d this packet", __func__,
msrcs);
pmr->mr_numsrc = htons(msrcs);
nbytes += (msrcs * sizeof(struct in6_addr));
}
if (is_source_query && msrcs == 0) {
CTR1(KTR_MLD, "%s: no recorded sources to report", __func__);
if (m != m0)
m_freem(m);
return (0);
}
/*
* We are good to go with first packet.
*/
if (m != m0) {
CTR1(KTR_MLD, "%s: enqueueing first packet", __func__);
m->m_pkthdr.PH_vt.vt_nrecs = 1;
_IF_ENQUEUE(ifq, m);
} else
m->m_pkthdr.PH_vt.vt_nrecs++;
/*
* No further work needed if no source list in packet(s).
*/
if (!record_has_sources)
return (nbytes);
/*
* Whilst sources remain to be announced, we need to allocate
* a new packet and fill out as many sources as will fit.
* Always try for a cluster first.
*/
while (nims != NULL) {
if (_IF_QFULL(ifq)) {
CTR1(KTR_MLD, "%s: outbound queue full", __func__);
return (-ENOMEM);
}
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (m == NULL)
m = m_gethdr(M_DONTWAIT, MT_DATA);
if (m == NULL)
return (-ENOMEM);
mld_save_context(m, ifp);
md = m_getptr(m, 0, &off);
pmr = (struct mldv2_record *)(mtod(md, uint8_t *) + off);
CTR1(KTR_MLD, "%s: allocated next packet", __func__);
if (!m_append(m, sizeof(struct mldv2_record), (void *)&mr)) {
if (m != m0)
m_freem(m);
CTR1(KTR_MLD, "%s: m_append() failed.", __func__);
return (-ENOMEM);
}
m->m_pkthdr.PH_vt.vt_nrecs = 1;
nbytes += sizeof(struct mldv2_record);
m0srcs = (ifp->if_mtu - MLD_MTUSPACE -
sizeof(struct mldv2_record)) / sizeof(struct in6_addr);
msrcs = 0;
RB_FOREACH_FROM(ims, ip6_msource_tree, nims) {
CTR2(KTR_MLD, "%s: visit node %s",
__func__, ip6_sprintf(ip6tbuf, &ims->im6s_addr));
now = im6s_get_mode(inm, ims, 1);
if ((now != mode) ||
(now == mode &&
(!use_block_allow && mode == MCAST_UNDEFINED))) {
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR1(KTR_MLD, "%s: skip node", __func__);
continue;
}
if (is_source_query && ims->im6s_stp == 0) {
CTR1(KTR_MLD, "%s: skip unrecorded node",
__func__);
continue;
}
CTR1(KTR_MLD, "%s: append node", __func__);
if (!m_append(m, sizeof(struct in6_addr),
(void *)&ims->im6s_addr)) {
if (m != m0)
m_freem(m);
CTR1(KTR_MLD, "%s: m_append() failed.",
__func__);
return (-ENOMEM);
}
++msrcs;
if (msrcs == m0srcs)
break;
}
pmr->mr_numsrc = htons(msrcs);
nbytes += (msrcs * sizeof(struct in6_addr));
CTR1(KTR_MLD, "%s: enqueueing next packet", __func__);
_IF_ENQUEUE(ifq, m);
}
return (nbytes);
}
/*
* Type used to mark record pass completion.
* We exploit the fact we can cast to this easily from the
* current filter modes on each ip_msource node.
*/
typedef enum {
REC_NONE = 0x00, /* MCAST_UNDEFINED */
REC_ALLOW = 0x01, /* MCAST_INCLUDE */
REC_BLOCK = 0x02, /* MCAST_EXCLUDE */
REC_FULL = REC_ALLOW | REC_BLOCK
} rectype_t;
/*
* Enqueue an MLDv2 filter list change to the given output queue.
*
* Source list filter state is held in an RB-tree. When the filter list
* for a group is changed without changing its mode, we need to compute
* the deltas between T0 and T1 for each source in the filter set,
* and enqueue the appropriate ALLOW_NEW/BLOCK_OLD records.
*
* As we may potentially queue two record types, and the entire R-B tree
* needs to be walked at once, we break this out into its own function
* so we can generate a tightly packed queue of packets.
*
* XXX This could be written to only use one tree walk, although that makes
* serializing into the mbuf chains a bit harder. For now we do two walks
* which makes things easier on us, and it may or may not be harder on
* the L2 cache.
*
* If successful the size of all data appended to the queue is returned,
* otherwise an error code less than zero is returned, or zero if
* no record(s) were appended.
*/
static int
mld_v2_enqueue_filter_change(struct ifqueue *ifq, struct in6_multi *inm)
{
static const int MINRECLEN =
sizeof(struct mldv2_record) + sizeof(struct in6_addr);
struct ifnet *ifp;
struct mldv2_record mr;
struct mldv2_record *pmr;
struct ip6_msource *ims, *nims;
struct mbuf *m, *m0, *md;
int m0srcs, nbytes, npbytes, off, rsrcs, schanged;
int nallow, nblock;
uint8_t mode, now, then;
rectype_t crt, drt, nrt;
#ifdef KTR
char ip6tbuf[INET6_ADDRSTRLEN];
#endif
IN6_MULTI_LOCK_ASSERT();
if (inm->in6m_nsrc == 0 ||
(inm->in6m_st[0].iss_asm > 0 && inm->in6m_st[1].iss_asm > 0))
return (0);
ifp = inm->in6m_ifp; /* interface */
mode = inm->in6m_st[1].iss_fmode; /* filter mode at t1 */
crt = REC_NONE; /* current group record type */
drt = REC_NONE; /* mask of completed group record types */
nrt = REC_NONE; /* record type for current node */
m0srcs = 0; /* # source which will fit in current mbuf chain */
npbytes = 0; /* # of bytes appended this packet */
nbytes = 0; /* # of bytes appended to group's state-change queue */
rsrcs = 0; /* # sources encoded in current record */
schanged = 0; /* # nodes encoded in overall filter change */
nallow = 0; /* # of source entries in ALLOW_NEW */
nblock = 0; /* # of source entries in BLOCK_OLD */
nims = NULL; /* next tree node pointer */
/*
* For each possible filter record mode.
* The first kind of source we encounter tells us which
* is the first kind of record we start appending.
* If a node transitioned to UNDEFINED at t1, its mode is treated
* as the inverse of the group's filter mode.
*/
while (drt != REC_FULL) {
do {
m0 = ifq->ifq_tail;
if (m0 != NULL &&
(m0->m_pkthdr.PH_vt.vt_nrecs + 1 <=
MLD_V2_REPORT_MAXRECS) &&
(m0->m_pkthdr.len + MINRECLEN) <
(ifp->if_mtu - MLD_MTUSPACE)) {
m = m0;
m0srcs = (ifp->if_mtu - m0->m_pkthdr.len -
sizeof(struct mldv2_record)) /
sizeof(struct in6_addr);
CTR1(KTR_MLD,
"%s: use previous packet", __func__);
} else {
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (m == NULL)
m = m_gethdr(M_DONTWAIT, MT_DATA);
if (m == NULL) {
CTR1(KTR_MLD,
"%s: m_get*() failed", __func__);
return (-ENOMEM);
}
m->m_pkthdr.PH_vt.vt_nrecs = 0;
mld_save_context(m, ifp);
m0srcs = (ifp->if_mtu - MLD_MTUSPACE -
sizeof(struct mldv2_record)) /
sizeof(struct in6_addr);
npbytes = 0;
CTR1(KTR_MLD,
"%s: allocated new packet", __func__);
}
/*
* Append the MLD group record header to the
* current packet's data area.
* Recalculate pointer to free space for next
* group record, in case m_append() allocated
* a new mbuf or cluster.
*/
memset(&mr, 0, sizeof(mr));
mr.mr_addr = inm->in6m_addr;
in6_clearscope(&mr.mr_addr);
if (!m_append(m, sizeof(mr), (void *)&mr)) {
if (m != m0)
m_freem(m);
CTR1(KTR_MLD,
"%s: m_append() failed", __func__);
return (-ENOMEM);
}
npbytes += sizeof(struct mldv2_record);
if (m != m0) {
/* new packet; offset in chain */
md = m_getptr(m, npbytes -
sizeof(struct mldv2_record), &off);
pmr = (struct mldv2_record *)(mtod(md,
uint8_t *) + off);
} else {
/* current packet; offset from last append */
md = m_last(m);
pmr = (struct mldv2_record *)(mtod(md,
uint8_t *) + md->m_len -
sizeof(struct mldv2_record));
}
/*
* Begin walking the tree for this record type
* pass, or continue from where we left off
* previously if we had to allocate a new packet.
* Only report deltas in-mode at t1.
* We need not report included sources as allowed
* if we are in inclusive mode on the group,
* however the converse is not true.
*/
rsrcs = 0;
if (nims == NULL) {
nims = RB_MIN(ip6_msource_tree,
&inm->in6m_srcs);
}
RB_FOREACH_FROM(ims, ip6_msource_tree, nims) {
CTR2(KTR_MLD, "%s: visit node %s", __func__,
ip6_sprintf(ip6tbuf, &ims->im6s_addr));
now = im6s_get_mode(inm, ims, 1);
then = im6s_get_mode(inm, ims, 0);
CTR3(KTR_MLD, "%s: mode: t0 %d, t1 %d",
__func__, then, now);
if (now == then) {
CTR1(KTR_MLD,
"%s: skip unchanged", __func__);
continue;
}
if (mode == MCAST_EXCLUDE &&
now == MCAST_INCLUDE) {
CTR1(KTR_MLD,
"%s: skip IN src on EX group",
__func__);
continue;
}
nrt = (rectype_t)now;
if (nrt == REC_NONE)
nrt = (rectype_t)(~mode & REC_FULL);
if (schanged++ == 0) {
crt = nrt;
} else if (crt != nrt)
continue;
if (!m_append(m, sizeof(struct in6_addr),
(void *)&ims->im6s_addr)) {
if (m != m0)
m_freem(m);
CTR1(KTR_MLD,
"%s: m_append() failed", __func__);
return (-ENOMEM);
}
nallow += !!(crt == REC_ALLOW);
nblock += !!(crt == REC_BLOCK);
if (++rsrcs == m0srcs)
break;
}
/*
* If we did not append any tree nodes on this
* pass, back out of allocations.
*/
if (rsrcs == 0) {
npbytes -= sizeof(struct mldv2_record);
if (m != m0) {
CTR1(KTR_MLD,
"%s: m_free(m)", __func__);
m_freem(m);
} else {
CTR1(KTR_MLD,
"%s: m_adj(m, -mr)", __func__);
m_adj(m, -((int)sizeof(
struct mldv2_record)));
}
continue;
}
npbytes += (rsrcs * sizeof(struct in6_addr));
if (crt == REC_ALLOW)
pmr->mr_type = MLD_ALLOW_NEW_SOURCES;
else if (crt == REC_BLOCK)
pmr->mr_type = MLD_BLOCK_OLD_SOURCES;
pmr->mr_numsrc = htons(rsrcs);
/*
* Count the new group record, and enqueue this
* packet if it wasn't already queued.
*/
m->m_pkthdr.PH_vt.vt_nrecs++;
if (m != m0)
_IF_ENQUEUE(ifq, m);
nbytes += npbytes;
} while (nims != NULL);
drt |= crt;
crt = (~crt & REC_FULL);
}
CTR3(KTR_MLD, "%s: queued %d ALLOW_NEW, %d BLOCK_OLD", __func__,
nallow, nblock);
return (nbytes);
}
static int
mld_v2_merge_state_changes(struct in6_multi *inm, struct ifqueue *ifscq)
{
struct ifqueue *gq;
struct mbuf *m; /* pending state-change */
struct mbuf *m0; /* copy of pending state-change */
struct mbuf *mt; /* last state-change in packet */
int docopy, domerge;
u_int recslen;
docopy = 0;
domerge = 0;
recslen = 0;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
/*
* If there are further pending retransmissions, make a writable
* copy of each queued state-change message before merging.
*/
if (inm->in6m_scrv > 0)
docopy = 1;
gq = &inm->in6m_scq;
#ifdef KTR
if (gq->ifq_head == NULL) {
CTR2(KTR_MLD, "%s: WARNING: queue for inm %p is empty",
__func__, inm);
}
#endif
m = gq->ifq_head;
while (m != NULL) {
/*
* Only merge the report into the current packet if
* there is sufficient space to do so; an MLDv2 report
* packet may only contain 65,535 group records.
* Always use a simple mbuf chain concatentation to do this,
* as large state changes for single groups may have
* allocated clusters.
*/
domerge = 0;
mt = ifscq->ifq_tail;
if (mt != NULL) {
recslen = m_length(m, NULL);
if ((mt->m_pkthdr.PH_vt.vt_nrecs +
m->m_pkthdr.PH_vt.vt_nrecs <=
MLD_V2_REPORT_MAXRECS) &&
(mt->m_pkthdr.len + recslen <=
(inm->in6m_ifp->if_mtu - MLD_MTUSPACE)))
domerge = 1;
}
if (!domerge && _IF_QFULL(gq)) {
CTR2(KTR_MLD,
"%s: outbound queue full, skipping whole packet %p",
__func__, m);
mt = m->m_nextpkt;
if (!docopy)
m_freem(m);
m = mt;
continue;
}
if (!docopy) {
CTR2(KTR_MLD, "%s: dequeueing %p", __func__, m);
_IF_DEQUEUE(gq, m0);
m = m0->m_nextpkt;
} else {
CTR2(KTR_MLD, "%s: copying %p", __func__, m);
m0 = m_dup(m, M_NOWAIT);
if (m0 == NULL)
return (ENOMEM);
m0->m_nextpkt = NULL;
m = m->m_nextpkt;
}
if (!domerge) {
CTR3(KTR_MLD, "%s: queueing %p to ifscq %p)",
__func__, m0, ifscq);
_IF_ENQUEUE(ifscq, m0);
} else {
struct mbuf *mtl; /* last mbuf of packet mt */
CTR3(KTR_MLD, "%s: merging %p with ifscq tail %p)",
__func__, m0, mt);
mtl = m_last(mt);
m0->m_flags &= ~M_PKTHDR;
mt->m_pkthdr.len += recslen;
mt->m_pkthdr.PH_vt.vt_nrecs +=
m0->m_pkthdr.PH_vt.vt_nrecs;
mtl->m_next = m0;
}
}
return (0);
}
/*
* Respond to a pending MLDv2 General Query.
*/
static void
mld_v2_dispatch_general_query(struct mld_ifinfo *mli)
{
struct ifmultiaddr *ifma, *tifma;
struct ifnet *ifp;
struct in6_multi *inm;
int retval;
IN6_MULTI_LOCK_ASSERT();
MLD_LOCK_ASSERT();
KASSERT(mli->mli_version == MLD_VERSION_2,
("%s: called when version %d", __func__, mli->mli_version));
ifp = mli->mli_ifp;
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH_SAFE(ifma, &ifp->if_multiaddrs, ifma_link, tifma) {
if (ifma->ifma_addr->sa_family != AF_INET6 ||
ifma->ifma_protospec == NULL)
continue;
inm = (struct in6_multi *)ifma->ifma_protospec;
KASSERT(ifp == inm->in6m_ifp,
("%s: inconsistent ifp", __func__));
switch (inm->in6m_state) {
case MLD_NOT_MEMBER:
case MLD_SILENT_MEMBER:
break;
case MLD_REPORTING_MEMBER:
case MLD_IDLE_MEMBER:
case MLD_LAZY_MEMBER:
case MLD_SLEEPING_MEMBER:
case MLD_AWAKENING_MEMBER:
inm->in6m_state = MLD_REPORTING_MEMBER;
retval = mld_v2_enqueue_group_record(&mli->mli_gq,
inm, 0, 0, 0, 0);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
CTR2(KTR_MLD, "%s: enqueue record = %d",
__func__, retval);
break;
case MLD_G_QUERY_PENDING_MEMBER:
case MLD_SG_QUERY_PENDING_MEMBER:
case MLD_LEAVING_MEMBER:
break;
}
}
IF_ADDR_UNLOCK(ifp);
mld_dispatch_queue(&mli->mli_gq, MLD_MAX_RESPONSE_BURST);
/*
* Slew transmission of bursts over 500ms intervals.
*/
if (mli->mli_gq.ifq_head != NULL) {
mli->mli_v2_timer = 1 + MLD_RANDOM_DELAY(
MLD_RESPONSE_BURST_INTERVAL);
V_interface_timers_running6 = 1;
}
}
/*
* Transmit the next pending message in the output queue.
*
* VIMAGE: Needs to store/restore vnet pointer on a per-mbuf-chain basis.
* MRT: Nothing needs to be done, as MLD traffic is always local to
* a link and uses a link-scope multicast address.
*/
static void
mld_dispatch_packet(struct mbuf *m)
{
struct ip6_moptions im6o;
struct ifnet *ifp;
struct ifnet *oifp;
struct mbuf *m0;
struct mbuf *md;
struct ip6_hdr *ip6;
struct mld_hdr *mld;
int error;
int off;
int type;
uint32_t ifindex;
CTR2(KTR_MLD, "%s: transmit %p", __func__, m);
/*
* Set VNET image pointer from enqueued mbuf chain
* before doing anything else. Whilst we use interface
* indexes to guard against interface detach, they are
* unique to each VIMAGE and must be retrieved.
*/
ifindex = mld_restore_context(m);
/*
* Check if the ifnet still exists. This limits the scope of
* any race in the absence of a global ifp lock for low cost
* (an array lookup).
*/
ifp = ifnet_byindex(ifindex);
if (ifp == NULL) {
CTR3(KTR_MLD, "%s: dropped %p as ifindex %u went away.",
__func__, m, ifindex);
m_freem(m);
IP6STAT_INC(ip6s_noroute);
goto out;
}
im6o.im6o_multicast_hlim = 1;
im6o.im6o_multicast_loop = (V_ip6_mrouter != NULL);
im6o.im6o_multicast_ifp = ifp;
if (m->m_flags & M_MLDV1) {
m0 = m;
} else {
m0 = mld_v2_encap_report(ifp, m);
if (m0 == NULL) {
CTR2(KTR_MLD, "%s: dropped %p", __func__, m);
m_freem(m);
IP6STAT_INC(ip6s_odropped);
goto out;
}
}
mld_scrub_context(m0);
m->m_flags &= ~(M_PROTOFLAGS);
m0->m_pkthdr.rcvif = V_loif;
ip6 = mtod(m0, struct ip6_hdr *);
#if 0
(void)in6_setscope(&ip6->ip6_dst, ifp, NULL); /* XXX LOR */
#else
/*
* XXX XXX Break some KPI rules to prevent an LOR which would
* occur if we called in6_setscope() at transmission.
* See comments at top of file.
*/
MLD_EMBEDSCOPE(&ip6->ip6_dst, ifp->if_index);
#endif
/*
* Retrieve the ICMPv6 type before handoff to ip6_output(),
* so we can bump the stats.
*/
md = m_getptr(m0, sizeof(struct ip6_hdr), &off);
mld = (struct mld_hdr *)(mtod(md, uint8_t *) + off);
type = mld->mld_type;
error = ip6_output(m0, &mld_po, NULL, IPV6_UNSPECSRC, &im6o,
&oifp, NULL);
if (error) {
CTR3(KTR_MLD, "%s: ip6_output(%p) = %d", __func__, m0, error);
goto out;
}
ICMP6STAT_INC(icp6s_outhist[type]);
if (oifp != NULL) {
icmp6_ifstat_inc(oifp, ifs6_out_msg);
switch (type) {
case MLD_LISTENER_REPORT:
case MLDV2_LISTENER_REPORT:
icmp6_ifstat_inc(oifp, ifs6_out_mldreport);
break;
case MLD_LISTENER_DONE:
icmp6_ifstat_inc(oifp, ifs6_out_mlddone);
break;
}
}
out:
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
return;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
/*
* Encapsulate an MLDv2 report.
*
* KAME IPv6 requires that hop-by-hop options be passed separately,
* and that the IPv6 header be prepended in a separate mbuf.
*
* Returns a pointer to the new mbuf chain head, or NULL if the
* allocation failed.
*/
static struct mbuf *
mld_v2_encap_report(struct ifnet *ifp, struct mbuf *m)
{
struct mbuf *mh;
struct mldv2_report *mld;
struct ip6_hdr *ip6;
struct in6_ifaddr *ia;
int mldreclen;
KASSERT(ifp != NULL, ("%s: null ifp", __func__));
KASSERT((m->m_flags & M_PKTHDR),
("%s: mbuf chain %p is !M_PKTHDR", __func__, m));
/*
* RFC3590: OK to send as :: or tentative during DAD.
*/
ia = in6ifa_ifpforlinklocal(ifp, IN6_IFF_NOTREADY|IN6_IFF_ANYCAST);
if (ia == NULL)
CTR1(KTR_MLD, "%s: warning: ia is NULL", __func__);
MGETHDR(mh, M_DONTWAIT, MT_HEADER);
if (mh == NULL) {
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
m_freem(m);
return (NULL);
}
MH_ALIGN(mh, sizeof(struct ip6_hdr) + sizeof(struct mldv2_report));
mldreclen = m_length(m, NULL);
CTR2(KTR_MLD, "%s: mldreclen is %d", __func__, mldreclen);
mh->m_len = sizeof(struct ip6_hdr) + sizeof(struct mldv2_report);
mh->m_pkthdr.len = sizeof(struct ip6_hdr) +
sizeof(struct mldv2_report) + mldreclen;
ip6 = mtod(mh, struct ip6_hdr *);
ip6->ip6_flow = 0;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
ip6->ip6_nxt = IPPROTO_ICMPV6;
ip6->ip6_src = ia ? ia->ia_addr.sin6_addr : in6addr_any;
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
ip6->ip6_dst = in6addr_linklocal_allv2routers;
/* scope ID will be set in netisr */
mld = (struct mldv2_report *)(ip6 + 1);
mld->mld_type = MLDV2_LISTENER_REPORT;
mld->mld_code = 0;
mld->mld_cksum = 0;
mld->mld_v2_reserved = 0;
mld->mld_v2_numrecs = htons(m->m_pkthdr.PH_vt.vt_nrecs);
m->m_pkthdr.PH_vt.vt_nrecs = 0;
mh->m_next = m;
mld->mld_cksum = in6_cksum(mh, IPPROTO_ICMPV6,
sizeof(struct ip6_hdr), sizeof(struct mldv2_report) + mldreclen);
return (mh);
}
#ifdef KTR
static char *
mld_rec_type_to_str(const int type)
{
switch (type) {
case MLD_CHANGE_TO_EXCLUDE_MODE:
return "TO_EX";
break;
case MLD_CHANGE_TO_INCLUDE_MODE:
return "TO_IN";
break;
case MLD_MODE_IS_EXCLUDE:
return "MODE_EX";
break;
case MLD_MODE_IS_INCLUDE:
return "MODE_IN";
break;
case MLD_ALLOW_NEW_SOURCES:
return "ALLOW_NEW";
break;
case MLD_BLOCK_OLD_SOURCES:
return "BLOCK_OLD";
break;
default:
break;
}
return "unknown";
}
#endif
static void
mld_init(void *unused __unused)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
{
CTR1(KTR_MLD, "%s: initializing", __func__);
MLD_LOCK_INIT();
ip6_initpktopts(&mld_po);
mld_po.ip6po_hlim = 1;
mld_po.ip6po_hbh = &mld_ra.hbh;
mld_po.ip6po_prefer_tempaddr = IP6PO_TEMPADDR_NOTPREFER;
mld_po.ip6po_flags = IP6PO_DONTFRAG;
}
SYSINIT(mld_init, SI_SUB_PSEUDO, SI_ORDER_MIDDLE, mld_init, NULL);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static void
mld_uninit(void *unused __unused)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
{
CTR1(KTR_MLD, "%s: tearing down", __func__);
MLD_LOCK_DESTROY();
}
SYSUNINIT(mld_uninit, SI_SUB_PSEUDO, SI_ORDER_MIDDLE, mld_uninit, NULL);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static void
vnet_mld_init(const void *unused __unused)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
{
CTR1(KTR_MLD, "%s: initializing", __func__);
LIST_INIT(&V_mli_head);
}
VNET_SYSINIT(vnet_mld_init, SI_SUB_PSEUDO, SI_ORDER_ANY, vnet_mld_init,
NULL);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static void
vnet_mld_uninit(const void *unused __unused)
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
{
CTR1(KTR_MLD, "%s: tearing down", __func__);
KASSERT(LIST_EMPTY(&V_mli_head),
("%s: mli list not empty; ifnets not detached?", __func__));
}
VNET_SYSUNINIT(vnet_mld_uninit, SI_SUB_PSEUDO, SI_ORDER_ANY, vnet_mld_uninit,
NULL);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
static int
mld_modevent(module_t mod, int type, void *unused __unused)
{
switch (type) {
case MOD_LOAD:
case MOD_UNLOAD:
break;
default:
return (EOPNOTSUPP);
}
return (0);
}
static moduledata_t mld_mod = {
"mld",
mld_modevent,
0
};
DECLARE_MODULE(mld, mld_mod, SI_SUB_PSEUDO, SI_ORDER_ANY);