freebsd-skq/share/mk/local.meta.sys.mk

287 lines
8.1 KiB
Makefile
Raw Normal View History

# $FreeBSD$
# local configuration specific to meta mode
# XXX some of this should be in meta.sys.mk
# we assume that MK_DIRDEPS_BUILD=yes
# we need this until there is an alternative
MK_INSTALL_AS_USER= yes
_default_makeobjdir=$${.CURDIR:S,^$${SRCTOP},$${OBJTOP},}
.if empty(OBJROOT) || ${.MAKE.LEVEL} == 0
.if defined(MAKEOBJDIRPREFIX) && !empty(MAKEOBJDIRPREFIX)
# put things approximately where they want
OBJROOT:=${MAKEOBJDIRPREFIX}${SRCTOP}/
MAKEOBJDIRPREFIX=
.export MAKEOBJDIRPREFIX
.endif
.if empty(MAKEOBJDIR)
# OBJTOP set below
MAKEOBJDIR=${_default_makeobjdir}
# export but do not track
.export-env MAKEOBJDIR
# Expand for our own use
MAKEOBJDIR:= ${MAKEOBJDIR}
.endif
.if !empty(SB)
SB_OBJROOT ?= ${SB}/obj/
# this is what we use below
OBJROOT ?= ${SB_OBJROOT}
.endif
2015-09-18 18:57:09 +00:00
OBJROOT ?= /usr/obj${SRCTOP}/
.if ${OBJROOT:M*/} != ""
OBJROOT:= ${OBJROOT:H:tA}/
.else
OBJROOT:= ${OBJROOT:H:tA}/${OBJROOT:T}
.endif
.export OBJROOT SRCTOP
# we need HOST_TARGET etc below.
.include <host-target.mk>
.export HOST_TARGET
.endif
# from src/Makefile (for universe)
TARGET_ARCHES_arm?= arm armeb armv6
TARGET_ARCHES_arm64?= aarch64
TARGET_ARCHES_mips?= mipsel mips mips64el mips64 mipsn32 mipsn32el
TARGET_ARCHES_powerpc?= powerpc powerpc64
TARGET_ARCHES_pc98?= i386
TARGET_ARCHES_riscv?= riscv64
# some corner cases
BOOT_MACHINE_DIR.amd64 = boot/i386
MACHINE_ARCH.host = ${_HOST_ARCH}
# the list of machines we support
ALL_MACHINE_LIST?= amd64 arm arm64 i386 mips pc98 powerpc riscv sparc64
.for m in ${ALL_MACHINE_LIST:O:u}
MACHINE_ARCH_LIST.$m?= ${TARGET_ARCHES_${m}:U$m}
MACHINE_ARCH.$m?= ${MACHINE_ARCH_LIST.$m:[1]}
BOOT_MACHINE_DIR.$m ?= boot/$m
.endfor
.ifndef _TARGET_SPEC
.if empty(MACHINE_ARCH)
.if !empty(TARGET_ARCH)
MACHINE_ARCH= ${TARGET_ARCH}
.else
MACHINE_ARCH= ${MACHINE_ARCH.${MACHINE}}
.endif
.endif
MACHINE_ARCH?= ${MACHINE_ARCH.${MACHINE}}
MACHINE_ARCH:= ${MACHINE_ARCH}
.else
# we got here via dirdeps
MACHINE_ARCH:= ${MACHINE_ARCH.${MACHINE}}
.endif
# now because for universe we want to potentially
# build for multiple MACHINE_ARCH per MACHINE
# we need more than MACHINE in TARGET_SPEC
TARGET_SPEC_VARS= MACHINE MACHINE_ARCH
# see dirdeps.mk
.if ${TARGET_SPEC:Uno:M*,*} != ""
_tspec := ${TARGET_SPEC:S/,/ /g}
MACHINE := ${_tspec:[1]}
MACHINE_ARCH := ${_tspec:[2]}
# etc.
# We need to stop that TARGET_SPEC affecting any submakes
# and deal with MACHINE=${TARGET_SPEC} in the environment.
TARGET_SPEC=
# export but do not track
.export-env TARGET_SPEC
.export ${TARGET_SPEC_VARS}
.for v in ${TARGET_SPEC_VARS:O:u}
.if empty($v)
.undef $v
.endif
.endfor
.endif
# make sure we know what TARGET_SPEC is
# as we may need it to find Makefile.depend*
TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
# to be consistent with src/Makefile just concatenate with '.'s
TARGET_OBJ_SPEC:= ${TARGET_SPEC:S;,;.;g}
OBJTOP:= ${OBJROOT}${TARGET_OBJ_SPEC}
.if defined(MAKEOBJDIR)
.if ${MAKEOBJDIR:M*/*} == ""
.error Cannot use MAKEOBJDIR=${MAKEOBJDIR}${.newline}Unset MAKEOBJDIR to get default: MAKEOBJDIR='${_default_makeobjdir}'
.endif
.endif
HOST_OBJTOP ?= ${OBJROOT}${HOST_TARGET}
.if ${OBJTOP} == ${HOST_OBJTOP} || ${REQUESTED_MACHINE:U${MACHINE}} == "host"
MACHINE= host
.if ${TARGET_MACHINE:Uno} == ${HOST_TARGET}
# not what we want
TARGET_MACHINE= host
.endif
.endif
.if ${MACHINE} == "host"
OBJTOP := ${HOST_OBJTOP}
.endif
.if ${.MAKE.LEVEL} == 0
PYTHON ?= /usr/local/bin/python
.export PYTHON
# this works best if share/mk is ready for it.
BUILD_AT_LEVEL0= no
# _SKIP_BUILD is not 100% as it requires wrapping all 'all:' targets to avoid
# building in MAKELEVEL0. Just prohibit 'all' entirely in this case to avoid
# problems.
.if ${MK_DIRDEPS_BUILD} == "yes" && \
${.MAKE.LEVEL} == 0 && ${BUILD_AT_LEVEL0:Uyes:tl} == "no"
.MAIN: dirdeps
.if make(all)
.error DIRDEPS_BUILD: Please run '${MAKE}' instead of '${MAKE} all'.
.endif
.endif
# we want to end up with a singe stage tree for all machines
.if ${MK_STAGING} == "yes"
.if empty(STAGE_ROOT)
STAGE_ROOT?= ${OBJROOT}stage
.export STAGE_ROOT
.endif
.endif
.endif
.if ${MK_STAGING} == "yes"
.if ${MACHINE} == "host"
STAGE_MACHINE= ${HOST_TARGET}
.else
STAGE_MACHINE:= ${TARGET_OBJ_SPEC}
.endif
STAGE_OBJTOP:= ${STAGE_ROOT}/${STAGE_MACHINE}
STAGE_COMMON_OBJTOP:= ${STAGE_ROOT}/common
STAGE_TARGET_OBJTOP:= ${STAGE_ROOT}/${TARGET_OBJ_SPEC}
STAGE_HOST_OBJTOP:= ${STAGE_ROOT}/${HOST_TARGET}
# These are exported for hooking in out-of-tree builds. They will always
# be overridden in sub-makes above when building in-tree.
.export STAGE_OBJTOP STAGE_TARGET_OBJTOP STAGE_HOST_OBJTOP
# Use tools/install.sh which can avoid the need for xinstall for simple cases.
INSTALL?= sh ${SRCTOP}/tools/install.sh
# This is for stage-install to pickup from the environment.
REAL_INSTALL:= ${INSTALL}
.export REAL_INSTALL
STAGE_INSTALL= sh ${.PARSEDIR:tA}/stage-install.sh OBJDIR=${.OBJDIR:tA}
STAGE_LIBDIR= ${STAGE_OBJTOP}${_LIBDIR:U${LIBDIR:U/lib}}
STAGE_INCLUDEDIR= ${STAGE_OBJTOP}${INCLUDEDIR:U/usr/include}
# this is not the same as INCLUDEDIR
STAGE_INCSDIR= ${STAGE_OBJTOP}${INCSDIR:U/include}
# the target is usually an absolute path
STAGE_SYMLINKS_DIR= ${STAGE_OBJTOP}
LDFLAGS_LAST+= -Wl,-rpath-link,${STAGE_LIBDIR}
.if ${MK_SYSROOT} == "yes"
SYSROOT?= ${STAGE_OBJTOP}
.else
LDFLAGS_LAST+= -L${STAGE_LIBDIR}
.endif
.endif # MK_STAGING
# this is sufficient for most of the tree.
.MAKE.DEPENDFILE_DEFAULT = ${.MAKE.DEPENDFILE_PREFIX}
# but if we have a machine qualified file it should be used in preference
.MAKE.DEPENDFILE_PREFERENCE = \
${.MAKE.DEPENDFILE_PREFIX}.${MACHINE} \
${.MAKE.DEPENDFILE_PREFIX}
.undef .MAKE.DEPENDFILE
.include "sys.dependfile.mk"
.if ${.MAKE.LEVEL} > 0 && ${MACHINE} == "host" && ${.MAKE.DEPENDFILE:E} != "host"
# we can use this but should not update it.
UPDATE_DEPENDFILE= NO
.endif
# define the list of places that contain files we are responsible for
.MAKE.META.BAILIWICK = ${SB} ${OBJROOT} ${STAGE_ROOT}
CSU_DIR.${MACHINE_ARCH} ?= csu/${MACHINE_ARCH}
CSU_DIR := ${CSU_DIR.${MACHINE_ARCH}}
.if !empty(TIME_STAMP)
TRACER= ${TIME_STAMP} ${:U}
.endif
.if !defined(_RECURSING_PROGS) && !defined(_RECURSING_CRUNCH) && \
!make(print-dir)
WITH_META_STATS= t
.endif
# toolchains can be a pain - especially bootstrappping them
.if ${MACHINE} == "host"
MK_SHARED_TOOLCHAIN= no
.endif
TOOLCHAIN_VARS= AS AR CC CLANG_TBLGEN CXX CPP LD NM OBJCOPY RANLIB \
STRINGS SIZE LLVM_TBLGEN
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
_toolchain_bin_CLANG_TBLGEN= /usr/bin/clang-tblgen
_toolchain_bin_LLVM_TBLGEN= /usr/bin/llvm-tblgen
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
_toolchain_bin_CXX= /usr/bin/c++
.ifdef WITH_TOOLSDIR
TOOLSDIR?= ${HOST_OBJTOP}/tools
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
.elif defined(STAGE_HOST_OBJTOP)
TOOLSDIR?= ${STAGE_HOST_OBJTOP}
.endif
# Only define if it exists in case user didn't run bootstrap-tools. Otherwise
# the tool will be built during the build. Building it assumes it is
# TARGET==MACHINE.
.if exists(${HOST_OBJTOP}/tools${.CURDIR})
BTOOLSPATH= ${HOST_OBJTOP}/tools${.CURDIR}
.endif
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
# Don't use the bootstrap tools logic on itself.
.if ${.TARGETS:Mbootstrap-tools} == "" && \
!make(showconfig) && \
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
!defined(BOOTSTRAPPING_TOOLS) && !empty(TOOLSDIR) && ${.MAKE.LEVEL} == 0
.for dir in /sbin /bin /usr/sbin /usr/bin
PATH:= ${TOOLSDIR}${dir}:${PATH}
.endfor
.export PATH
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
# Prefer the TOOLSDIR version of the toolchain if present vs the host version.
.for var in ${TOOLCHAIN_VARS}
_toolchain_bin.${var}= ${TOOLSDIR}${_toolchain_bin_${var}:U/usr/bin/${var:tl}}
.if exists(${_toolchain_bin.${var}})
HOST_${var}?= ${_toolchain_bin.${var}}
.export HOST_${var}
.endif
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
.endfor
.endif
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
.for var in ${TOOLCHAIN_VARS}
HOST_${var}?= ${_toolchain_bin_${var}:U/usr/bin/${var:tl}}
.endfor
.if ${MACHINE} == "host"
META MODE: Rework [bootstrapped] tools PATH support. - Support more of the toolchain from TOOLSDIR. - This also improves 'make bootstrap-tools' to pass, for example, AS=/usr/bin/as to Makefile.inc1, which will tell cross-tools to use external toolchain support and avoid building things we won't be using in the build. - Always set the PATH to contain the staged TOOLSDIR directories when not building the bootstrap targets. The previous version was only setting this at MAKE.LEVEL==0 and if the TOOLSDIR existed. Both of these prevented using staged tools that were built during the build though as DIRDEPS with .host dependencies, such as the fix for needing usr.bin/localedef.host in r291311. This is not a common tool so we must build and use it during the build, and need to be prepared to change PATH as soon as it appears. This should also fix the issue of host dependencies disappearing from Makefile.depend and then reappearing due to the start of the fresh build not having the directory yet, resulting in the tools that were built not actually being used. - Only use LEGACY_TOOLS while building in Makefile.inc1. After r291317 and r291546 there is no need to add LEGACY_TOOLS into the PATH for the pseudo/targets/toolchain build. - Because the pseudo/targets/toolchain will now build its own [clang-]tblgen, the special logic in clang.build.mk is no longer needed. - LEGACY_TOOLS is no longer used outside of targets/pseudo/bootstrap-tools so is no longer passed into the environment in its build. Sponsored by: EMC / Isilon Storage Division
2015-12-01 05:19:02 +00:00
.for var in ${TOOLCHAIN_VARS}
${var}= ${HOST_${var}}
.endfor
.endif
.if ${MACHINE:Nhost:Ncommon} != "" && ${MACHINE} != ${HOST_MACHINE}
# cross-building
.if !defined(FREEBSD_REVISION)
FREEBSD_REVISION!= sed -n '/^REVISION=/{s,.*=,,;s,",,g;p; }' ${SRCTOP}/sys/conf/newvers.sh
.export FREEBSD_REVISION
.endif
CROSS_TARGET_FLAGS= -target ${MACHINE_ARCH}-unknown-freebsd${FREEBSD_REVISION}
CFLAGS+= ${CROSS_TARGET_FLAGS}
ACFLAGS+= ${CROSS_TARGET_FLAGS}
LDFLAGS+= -Wl,-m -Wl,elf_${MACHINE_ARCH}_fbsd
.endif
META_MODE+= missing-meta=yes
.if empty(META_MODE:Mnofilemon)
META_MODE+= missing-filemon=yes
.endif