freebsd-skq/sbin/newfs/newfs.c

686 lines
19 KiB
C
Raw Normal View History

/*
* Copyright (c) 1983, 1989, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
static const char copyright[] =
"@(#) Copyright (c) 1983, 1989, 1993, 1994\n\
The Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#ifndef lint
#if 0
static char sccsid[] = "@(#)newfs.c 8.13 (Berkeley) 5/1/95";
#endif
static const char rcsid[] =
1999-08-28 00:22:10 +00:00
"$FreeBSD$";
#endif /* not lint */
/*
* newfs: friendly front end to mkfs
*/
#include <sys/param.h>
#include <sys/stat.h>
#include <sys/disklabel.h>
#include <sys/file.h>
#include <sys/mount.h>
#include <ufs/ufs/dir.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <ufs/ufs/ufsmount.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <paths.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syslog.h>
#include <unistd.h>
#if __STDC__
#include <stdarg.h>
#else
#include <varargs.h>
#endif
#include "mntopts.h"
struct mntopt mopts[] = {
MOPT_STDOPTS,
MOPT_ASYNC,
{ NULL },
};
#if __STDC__
void fatal(const char *fmt, ...) __printflike(1, 2);
#else
void fatal();
#endif
#define COMPAT /* allow non-labeled disks */
/*
* The following two constants set the default block and fragment sizes.
* Both constants must be a power of 2 and meet the following constraints:
* MINBSIZE <= DESBLKSIZE <= MAXBSIZE
* sectorsize <= DESFRAGSIZE <= DESBLKSIZE
* DESBLKSIZE / DESFRAGSIZE <= 8
*/
#define DFL_FRAGSIZE 1024
#define DFL_BLKSIZE 8192
/*
* Cylinder groups may have up to many cylinders. The actual
* number used depends upon how much information can be stored
* on a single cylinder. The default is to use 22 cylinders
* per group, which seems to be the largest value allowed given
* all the other default values.
*/
#define DESCPG 22 /* desired fs_cpg */
/*
* Once upon a time...
* ROTDELAY gives the minimum number of milliseconds to initiate
* another disk transfer on the same cylinder. It is used in
* determining the rotationally optimal layout for disk blocks
* within a file; the default of fs_rotdelay is 4ms.
*
* ...but now we make this 0 to disable the rotdelay delay because
* modern drives with read/write-behind achieve higher performance
* without the delay.
*/
#define ROTDELAY 0
/*
* MAXBLKPG determines the maximum number of data blocks which are
* placed in a single cylinder group. The default is one indirect
* block worth of data blocks.
*/
#define MAXBLKPG(bsize) ((bsize) / sizeof(daddr_t))
/*
* Each file system has a number of inodes statically allocated.
* We allocate one inode slot per NFPI fragments, expecting this
* to be far more than we will ever need.
*/
#define NFPI 4
/*
* Once upon a time...
* For each cylinder we keep track of the availability of blocks at different
* rotational positions, so that we can lay out the data to be picked
* up with minimum rotational latency. NRPOS is the default number of
* rotational positions that we distinguish. With NRPOS of 8 the resolution
* of our summary information is 2ms for a typical 3600 rpm drive.
*
1998-01-16 06:31:23 +00:00
* ...but now we make this 1 (which essentially disables the rotational
* position table because modern drives with read-ahead and write-behind do
* better without the rotational position table.
*/
#define NRPOS 1 /* number distinct rotational positions */
/*
* About the same time as the above, we knew what went where on the disks.
* no longer so, so kill the code which finds the different platters too...
* We do this by saying one head, with a lot of sectors on it.
* The number of sectors are used to determine the size of a cyl-group.
* Kirk suggested one or two meg per "cylinder" so we say two.
*/
#define NTRACKS 1 /* number of heads */
#define NSECTORS 4096 /* number of sectors */
int Nflag; /* run without writing file system */
int Oflag; /* format as an 4.3BSD file system */
int Uflag; /* enable soft updates for file system */
int fssize; /* file system size */
int ntracks = NTRACKS; /* # tracks/cylinder */
int nsectors = NSECTORS; /* # sectors/track */
int nphyssectors; /* # sectors/track including spares */
int secpercyl; /* sectors per cylinder */
int trackspares = -1; /* spare sectors per track */
int cylspares = -1; /* spare sectors per cylinder */
int sectorsize; /* bytes/sector */
int realsectorsize; /* bytes/sector in hardware */
int rpm; /* revolutions/minute of drive */
int interleave; /* hardware sector interleave */
int trackskew = -1; /* sector 0 skew, per track */
int headswitch; /* head switch time, usec */
int trackseek; /* track-to-track seek, usec */
int fsize = 0; /* fragment size */
int bsize = 0; /* block size */
int cpg = DESCPG; /* cylinders/cylinder group */
int cpgflg; /* cylinders/cylinder group flag was given */
int minfree = MINFREE; /* free space threshold */
int opt = DEFAULTOPT; /* optimization preference (space or time) */
int density; /* number of bytes per inode */
int maxcontig = 0; /* max contiguous blocks to allocate */
int rotdelay = ROTDELAY; /* rotational delay between blocks */
int maxbpg; /* maximum blocks per file in a cyl group */
int nrpos = NRPOS; /* # of distinguished rotational positions */
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
int avgfilesize = AVFILESIZ;/* expected average file size */
int avgfilesperdir = AFPDIR;/* expected number of files per directory */
int bbsize = BBSIZE; /* boot block size */
int sbsize = SBSIZE; /* superblock size */
int mntflags = MNT_ASYNC; /* flags to be passed to mount */
1995-09-17 09:54:05 +00:00
int t_or_u_flag = 0; /* user has specified -t or -u */
u_long memleft; /* virtual memory available */
caddr_t membase; /* start address of memory based filesystem */
char *filename;
#ifdef COMPAT
char *disktype;
int unlabeled;
#endif
char device[MAXPATHLEN];
char *progname;
extern void mkfs __P((struct partition *, char *, int, int));
static void usage __P((void));
static void rewritelabel __P((char *s, int fd, register struct disklabel *lp));
int
main(argc, argv)
int argc;
char *argv[];
{
register int ch;
register struct partition *pp;
register struct disklabel *lp;
struct disklabel *getdisklabel();
struct partition oldpartition;
struct stat st;
struct statfs *mp;
int fsi, fso, len, n, vflag;
char *cp, *s1, *s2, *special, *opstring;
vflag = 0;
if ((progname = strrchr(*argv, '/')))
++progname;
else
progname = *argv;
opstring = "NOS:T:Ua:b:c:d:e:f:g:h:i:k:l:m:n:o:p:r:s:t:u:vx:";
while ((ch = getopt(argc, argv, opstring)) != -1)
switch (ch) {
case 'N':
Nflag = 1;
break;
case 'O':
Oflag = 1;
break;
case 'S':
if ((sectorsize = atoi(optarg)) <= 0)
fatal("%s: bad sector size", optarg);
break;
#ifdef COMPAT
case 'T':
disktype = optarg;
break;
#endif
case 'F':
filename = optarg;
break;
case 'U':
Uflag = 1;
break;
case 'a':
if ((maxcontig = atoi(optarg)) <= 0)
fatal("%s: bad maximum contiguous blocks",
optarg);
break;
case 'b':
if ((bsize = atoi(optarg)) < MINBSIZE)
fatal("%s: bad block size", optarg);
break;
case 'c':
if ((cpg = atoi(optarg)) <= 0)
fatal("%s: bad cylinders/group", optarg);
cpgflg++;
break;
case 'd':
if ((rotdelay = atoi(optarg)) < 0)
fatal("%s: bad rotational delay", optarg);
break;
case 'e':
if ((maxbpg = atoi(optarg)) <= 0)
fatal("%s: bad blocks per file in a cylinder group",
optarg);
break;
case 'f':
if ((fsize = atoi(optarg)) <= 0)
fatal("%s: bad fragment size", optarg);
break;
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
case 'g':
if ((avgfilesize = atoi(optarg)) <= 0)
fatal("%s: bad average file size", optarg);
break;
case 'h':
if ((avgfilesperdir = atoi(optarg)) <= 0)
fatal("%s: bad average files per dir", optarg);
break;
case 'i':
if ((density = atoi(optarg)) <= 0)
fatal("%s: bad bytes per inode", optarg);
break;
case 'k':
if ((trackskew = atoi(optarg)) < 0)
fatal("%s: bad track skew", optarg);
break;
case 'l':
if ((interleave = atoi(optarg)) <= 0)
fatal("%s: bad interleave", optarg);
break;
case 'm':
if ((minfree = atoi(optarg)) < 0 || minfree > 99)
fatal("%s: bad free space %%", optarg);
break;
case 'n':
if ((nrpos = atoi(optarg)) < 0)
fatal("%s: bad rotational layout count",
optarg);
if (nrpos == 0)
nrpos = 1;
break;
case 'o':
if (strcmp(optarg, "space") == 0)
opt = FS_OPTSPACE;
else if (strcmp(optarg, "time") == 0)
opt = FS_OPTTIME;
else
fatal("%s: unknown optimization preference: use `space' or `time'", optarg);
break;
case 'p':
if ((trackspares = atoi(optarg)) < 0)
fatal("%s: bad spare sectors per track",
optarg);
break;
case 'r':
if ((rpm = atoi(optarg)) <= 0)
fatal("%s: bad revolutions/minute", optarg);
break;
case 's':
if ((fssize = atoi(optarg)) <= 0)
fatal("%s: bad file system size", optarg);
break;
case 't':
1995-09-17 09:54:05 +00:00
t_or_u_flag++;
if ((ntracks = atoi(optarg)) < 0)
fatal("%s: bad total tracks", optarg);
break;
case 'u':
1995-09-17 09:54:05 +00:00
t_or_u_flag++;
if ((nsectors = atoi(optarg)) < 0)
fatal("%s: bad sectors/track", optarg);
break;
case 'v':
vflag = 1;
break;
case 'x':
if ((cylspares = atoi(optarg)) < 0)
fatal("%s: bad spare sectors per cylinder",
optarg);
break;
case '?':
default:
usage();
}
argc -= optind;
argv += optind;
if (argc != 2 && argc != 1)
usage();
special = argv[0];
cp = strrchr(special, '/');
if (cp == 0) {
/*
* No path prefix; try /dev/%s.
*/
(void)snprintf(device, sizeof(device), "%s%s", _PATH_DEV, special);
special = device;
}
if (Nflag) {
fso = -1;
} else {
fso = open(special, O_WRONLY);
if (fso < 0)
fatal("%s: %s", special, strerror(errno));
/* Bail if target special is mounted */
n = getmntinfo(&mp, MNT_NOWAIT);
if (n == 0)
fatal("%s: getmntinfo: %s", special, strerror(errno));
len = sizeof(_PATH_DEV) - 1;
s1 = special;
if (strncmp(_PATH_DEV, s1, len) == 0)
s1 += len;
while (--n >= 0) {
s2 = mp->f_mntfromname;
if (strncmp(_PATH_DEV, s2, len) == 0) {
s2 += len - 1;
*s2 = 'r';
}
if (strcmp(s1, s2) == 0 || strcmp(s1, &s2[1]) == 0)
fatal("%s is mounted on %s",
special, mp->f_mntonname);
++mp;
}
}
fsi = open(special, O_RDONLY);
if (fsi < 0)
fatal("%s: %s", special, strerror(errno));
if (fstat(fsi, &st) < 0)
fatal("%s: %s", special, strerror(errno));
if ((st.st_mode & S_IFMT) != S_IFCHR)
printf("%s: %s: not a character-special device\n",
progname, special);
cp = strchr(argv[0], '\0');
if (cp == argv[0])
fatal("null special file name");
cp--;
if (!vflag && (*cp < 'a' || *cp > 'h') && !isdigit(*cp))
fatal("%s: can't figure out file system partition",
argv[0]);
#ifdef COMPAT
if (disktype == NULL)
disktype = argv[1];
#endif
lp = getdisklabel(special, fsi);
if (vflag || isdigit(*cp))
pp = &lp->d_partitions[0];
else
pp = &lp->d_partitions[*cp - 'a'];
if (pp->p_size == 0)
fatal("%s: `%c' partition is unavailable",
argv[0], *cp);
if (pp->p_fstype == FS_BOOT)
fatal("%s: `%c' partition overlaps boot program",
argv[0], *cp);
if (fssize == 0)
fssize = pp->p_size;
if (fssize > pp->p_size)
fatal("%s: maximum file system size on the `%c' partition is %d",
argv[0], *cp, pp->p_size);
if (rpm == 0) {
rpm = lp->d_rpm;
if (rpm <= 0)
rpm = 3600;
}
if (ntracks == 0) {
ntracks = lp->d_ntracks;
if (ntracks <= 0)
fatal("%s: no default #tracks", argv[0]);
}
if (nsectors == 0) {
nsectors = lp->d_nsectors;
if (nsectors <= 0)
fatal("%s: no default #sectors/track", argv[0]);
}
if (sectorsize == 0) {
sectorsize = lp->d_secsize;
if (sectorsize <= 0)
fatal("%s: no default sector size", argv[0]);
}
if (trackskew == -1) {
trackskew = lp->d_trackskew;
if (trackskew < 0)
trackskew = 0;
}
if (interleave == 0) {
interleave = lp->d_interleave;
if (interleave <= 0)
interleave = 1;
}
if (fsize == 0) {
fsize = pp->p_fsize;
if (fsize <= 0)
fsize = MAX(DFL_FRAGSIZE, lp->d_secsize);
}
if (bsize == 0) {
bsize = pp->p_frag * pp->p_fsize;
if (bsize <= 0)
bsize = MIN(DFL_BLKSIZE, 8 * fsize);
}
/*
* Maxcontig sets the default for the maximum number of blocks
* that may be allocated sequentially. With filesystem clustering
* it is possible to allocate contiguous blocks up to the maximum
* transfer size permitted by the controller or buffering.
*/
if (maxcontig == 0)
maxcontig = MAX(1, MAXPHYS / bsize - 1);
if (density == 0)
density = NFPI * fsize;
if (minfree < MINFREE && opt != FS_OPTSPACE) {
fprintf(stderr, "Warning: changing optimization to space ");
fprintf(stderr, "because minfree is less than %d%%\n", MINFREE);
opt = FS_OPTSPACE;
}
if (trackspares == -1) {
trackspares = lp->d_sparespertrack;
if (trackspares < 0)
trackspares = 0;
}
nphyssectors = nsectors + trackspares;
if (cylspares == -1) {
cylspares = lp->d_sparespercyl;
if (cylspares < 0)
cylspares = 0;
}
secpercyl = nsectors * ntracks - cylspares;
/*
* Only complain if -t or -u have been specified; the default
1998-01-16 06:31:23 +00:00
* case (4096 sectors per cylinder) is intended to disagree
* with the disklabel.
*/
1995-09-17 09:54:05 +00:00
if (t_or_u_flag && secpercyl != lp->d_secpercyl)
fprintf(stderr, "%s (%d) %s (%lu)\n",
"Warning: calculated sectors per cylinder", secpercyl,
1998-06-28 20:11:23 +00:00
"disagrees with disk label", (u_long)lp->d_secpercyl);
if (maxbpg == 0)
maxbpg = MAXBLKPG(bsize);
headswitch = lp->d_headswitch;
trackseek = lp->d_trkseek;
#ifdef notdef /* label may be 0 if faked up by kernel */
bbsize = lp->d_bbsize;
sbsize = lp->d_sbsize;
#endif
oldpartition = *pp;
#ifdef tahoe
realsectorsize = sectorsize;
if (sectorsize != DEV_BSIZE) { /* XXX */
int secperblk = DEV_BSIZE / sectorsize;
sectorsize = DEV_BSIZE;
nsectors /= secperblk;
nphyssectors /= secperblk;
secpercyl /= secperblk;
fssize /= secperblk;
pp->p_size /= secperblk;
}
#else
realsectorsize = sectorsize;
if (sectorsize != DEV_BSIZE) { /* XXX */
int secperblk = sectorsize / DEV_BSIZE;
sectorsize = DEV_BSIZE;
nsectors *= secperblk;
nphyssectors *= secperblk;
secpercyl *= secperblk;
fssize *= secperblk;
pp->p_size *= secperblk;
}
#endif
mkfs(pp, special, fsi, fso);
#ifdef tahoe
if (realsectorsize != DEV_BSIZE)
pp->p_size *= DEV_BSIZE / realsectorsize;
#else
if (realsectorsize != DEV_BSIZE)
pp->p_size /= realsectorsize /DEV_BSIZE;
#endif
if (!Nflag && bcmp(pp, &oldpartition, sizeof(oldpartition)))
rewritelabel(special, fso, lp);
if (!Nflag)
close(fso);
close(fsi);
exit(0);
}
#ifdef COMPAT
const char lmsg[] = "%s: can't read disk label; disk type must be specified";
#else
const char lmsg[] = "%s: can't read disk label";
#endif
struct disklabel *
getdisklabel(s, fd)
char *s;
int fd;
{
static struct disklabel lab;
if (ioctl(fd, DIOCGDINFO, (char *)&lab) < 0) {
#ifdef COMPAT
if (disktype) {
struct disklabel *lp, *getdiskbyname();
unlabeled++;
lp = getdiskbyname(disktype);
if (lp == NULL)
fatal("%s: unknown disk type", disktype);
return (lp);
}
#endif
warn("ioctl (GDINFO)");
fatal(lmsg, s);
}
return (&lab);
}
void
rewritelabel(s, fd, lp)
char *s;
int fd;
register struct disklabel *lp;
{
#ifdef COMPAT
if (unlabeled)
return;
#endif
lp->d_checksum = 0;
lp->d_checksum = dkcksum(lp);
if (ioctl(fd, DIOCWDINFO, (char *)lp) < 0) {
warn("ioctl (WDINFO)");
fatal("%s: can't rewrite disk label", s);
}
}
/*VARARGS*/
void
#if __STDC__
fatal(const char *fmt, ...)
#else
fatal(fmt, va_alist)
char *fmt;
va_dcl
#endif
{
va_list ap;
#if __STDC__
va_start(ap, fmt);
#else
va_start(ap);
#endif
if (fcntl(STDERR_FILENO, F_GETFL) < 0) {
openlog(progname, LOG_CONS, LOG_DAEMON);
vsyslog(LOG_ERR, fmt, ap);
closelog();
} else {
vwarnx(fmt, ap);
}
va_end(ap);
exit(1);
/*NOTREACHED*/
}
static void
usage()
{
fprintf(stderr,
"usage: %s [ -fsoptions ] special-device%s\n",
progname,
#ifdef COMPAT
" [device-type]");
#else
"");
#endif
fprintf(stderr, "where fsoptions are:\n");
fprintf(stderr,
"\t-N do not create file system, just print out parameters\n");
fprintf(stderr, "\t-O create a 4.3BSD format filesystem\n");
fprintf(stderr, "\t-S sector size\n");
#ifdef COMPAT
fprintf(stderr, "\t-T disktype\n");
#endif
fprintf(stderr, "\t-U enable soft updates\n");
fprintf(stderr, "\t-a maximum contiguous blocks\n");
fprintf(stderr, "\t-b block size\n");
fprintf(stderr, "\t-c cylinders/group\n");
fprintf(stderr, "\t-d rotational delay between contiguous blocks\n");
fprintf(stderr, "\t-e maximum blocks per file in a cylinder group\n");
fprintf(stderr, "\t-f frag size\n");
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>. His description of the problem and solution follow. My own tests show speedups on typical filesystem intensive workloads of 5% to 12% which is very impressive considering the small amount of code change involved. ------ One day I noticed that some file operations run much faster on small file systems then on big ones. I've looked at the ffs algorithms, thought about them, and redesigned the dirpref algorithm. First I want to describe the results of my tests. These results are old and I have improved the algorithm after these tests were done. Nevertheless they show how big the perfomance speedup may be. I have done two file/directory intensive tests on a two OpenBSD systems with old and new dirpref algorithm. The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports". The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release. It contains 6596 directories and 13868 files. The test systems are: 1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for test is at wd1. Size of test file system is 8 Gb, number of cg=991, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=35 2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system at wd0, file system for test is at wd1. Size of test file system is 40 Gb, number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50 You can get more info about the test systems and methods at: http://www.ptci.ru/gluk/dirpref/old/dirpref.html Test Results tar -xzf ports.tar.gz rm -rf ports mode old dirpref new dirpref speedup old dirprefnew dirpref speedup First system normal 667 472 1.41 477 331 1.44 async 285 144 1.98 130 14 9.29 sync 768 616 1.25 477 334 1.43 softdep 413 252 1.64 241 38 6.34 Second system normal 329 81 4.06 263.5 93.5 2.81 async 302 25.7 11.75 112 2.26 49.56 sync 281 57.0 4.93 263 90.5 2.9 softdep 341 40.6 8.4 284 4.76 59.66 "old dirpref" and "new dirpref" columns give a test time in seconds. speedup - speed increasement in times, ie. old dirpref / new dirpref. ------ Algorithm description The old dirpref algorithm is described in comments: /* * Find a cylinder to place a directory. * * The policy implemented by this algorithm is to select from * among those cylinder groups with above the average number of * free inodes, the one with the smallest number of directories. */ A new directory is allocated in a different cylinder groups than its parent directory resulting in a directory tree that is spreaded across all the cylinder groups. This spreading out results in a non-optimal access to the directories and files. When we have a small filesystem it is not a problem but when the filesystem is big then perfomance degradation becomes very apparent. What I mean by a big file system ? 1. A big filesystem is a filesystem which occupy 20-30 or more percent of total drive space, i.e. first and last cylinder are physically located relatively far from each other. 2. It has a relatively large number of cylinder groups, for example more cylinder groups than 50% of the buffers in the buffer cache. The first results in long access times, while the second results in many buffers being used by metadata operations. Such operations use cylinder group blocks and on-disk inode blocks. The cylinder group block (fs->fs_cblkno) contains struct cg, inode and block bit maps. It is 2k in size for the default filesystem parameters. If new and parent directories are located in different cylinder groups then the system performs more input/output operations and uses more buffers. On filesystems with many cylinder groups, lots of cache buffers are used for metadata operations. My solution for this problem is very simple. I allocate many directories in one cylinder group. I also do some things, so that the new allocation method does not cause excessive fragmentation and all directory inodes will not be located at a location far from its file's inodes and data. The algorithm is: /* * Find a cylinder group to place a directory. * * The policy implemented by this algorithm is to allocate a * directory inode in the same cylinder group as its parent * directory, but also to reserve space for its files inodes * and data. Restrict the number of directories which may be * allocated one after another in the same cylinder group * without intervening allocation of files. * * If we allocate a first level directory then force allocation * in another cylinder group. */ My early versions of dirpref give me a good results for a wide range of file operations and different filesystem capacities except one case: those applications that create their entire directory structure first and only later fill this structure with files. My solution for such and similar cases is to limit a number of directories which may be created one after another in the same cylinder group without intervening file creations. For this purpose, I allocate an array of counters at mount time. This array is linked to the superblock fs->fs_contigdirs[cg]. Each time a directory is created the counter increases and each time a file is created the counter decreases. A 60Gb filesystem with 8mb/cg requires 10kb of memory for the counters array. The maxcontigdirs is a maximum number of directories which may be created without an intervening file creation. I found in my tests that the best performance occurs when I restrict the number of directories in one cylinder group such that all its files may be located in the same cylinder group. There may be some deterioration in performance if all the file inodes are in the same cylinder group as its containing directory, but their data partially resides in a different cylinder group. The maxcontigdirs value is calculated to try to prevent this condition. Since there is no way to know how many files and directories will be allocated later I added two optimization parameters in superblock/tunefs. They are: int32_t fs_avgfilesize; /* expected average file size */ int32_t fs_avgfpdir; /* expected # of files per directory */ These parameters have reasonable defaults but may be tweeked for special uses of a filesystem. They are only necessary in rare cases like better tuning a filesystem being used to store a squid cache. I have been using this algorithm for about 3 months. I have done a lot of testing on filesystems with different capacities, average filesize, average number of files per directory, and so on. I think this algorithm has no negative impact on filesystem perfomance. It works better than the default one in all cases. The new dirpref will greatly improve untarring/removing/coping of big directories, decrease load on cvs servers and much more. The new dirpref doesn't speedup a compilation process, but also doesn't slow it down. Obtained from: Grigoriy Orlov <gluk@ptci.ru>
2001-04-10 08:38:59 +00:00
fprintf(stderr, "\t-g average file size\n");
fprintf(stderr, "\t-h average files per directory\n");
fprintf(stderr, "\t-i number of bytes per inode\n");
fprintf(stderr, "\t-k sector 0 skew, per track\n");
fprintf(stderr, "\t-l hardware sector interleave\n");
fprintf(stderr, "\t-m minimum free space %%\n");
fprintf(stderr, "\t-n number of distinguished rotational positions\n");
fprintf(stderr, "\t-o optimization preference (`space' or `time')\n");
fprintf(stderr, "\t-p spare sectors per track\n");
fprintf(stderr, "\t-s file system size (sectors)\n");
fprintf(stderr, "\t-r revolutions/minute\n");
fprintf(stderr, "\t-t tracks/cylinder\n");
fprintf(stderr, "\t-u sectors/track\n");
fprintf(stderr,
"\t-v do not attempt to determine partition name from device name\n");
fprintf(stderr, "\t-x spare sectors per cylinder\n");
exit(1);
}