freebsd-skq/etc/snmpd.config

# $FreeBSD$
#
# Example configuration file for bsnmpd(1).
#

#
# Set some common variables
#
location := "Room 200"
contact := "sysmeister@example.com"
system := 1	# FreeBSD
traphost := localhost
trapport := 162

#
# Set the SNMP engine ID.
#
# The snmpEngineID object required from the SNMPv3 Framework. If not explicitly set via
# this configuration file, an ID is assigned based on the value of the
# kern.hostid variable
# engine := 0x80:0x10:0x08:0x10:0x80:0x25
# snmpEngineID = $(engine)

# Change this!
read := "public"
# Uncomment begemotSnmpdCommunityString.0.2 below that sets the community
# string to enable write access.
write := "geheim"
trap := "mytrap"

# Declarations for SNMP-USER-BASED-SM-MIB authentication and privacy options
NoAuthProtocol		:= 1.3.6.1.6.3.10.1.1.1
HMACMD5AuthProtocol	:= 1.3.6.1.6.3.10.1.1.2
HMACSHAAuthProtocol	:= 1.3.6.1.6.3.10.1.1.3
NoPrivProtocol		:= 1.3.6.1.6.3.10.1.2.1
DESPrivProtocol		:= 1.3.6.1.6.3.10.1.2.2
AesCfb128Protocol	:= 1.3.6.1.6.3.10.1.2.4

#
# SNMPv3 USM User definition
#
# The localized hex password for a user may be obtained by setting SNMPUSER, SNMPPASSWD,
# SNMPAUTH and SNMPPRIV environment variables to the desired parameters and invoking
# 'bsnmpget -v 3 -D -K -o verbose' against the running bsnmpd(1). For other
# usages refer to the bsnmpget(1) manual page. The following lines define a user "bsnmp"
# which a private password "bsnmp", localized for the above engine ID.
#
# user1 := "bsnmp"
# user1passwd := 0x1b:0x6d:0x9e:0x94:0xbe:0x19:0x17:0xfb:0xde:0x60:0x46:0xfe:0x59:0x6f:0x61:0x95:0xf2:0xc9:0x57:0x1f

#
# Configuration
#
%snmpd
begemotSnmpdDebugDumpPdus	= 2
begemotSnmpdDebugSyslogPri	= 7

#
# Set the read and write communities.
#
# The default value of the community strings is NULL (note, that this is
# different from the empty string). This disables both read and write access.
# To enable read access only the read community string must be set. Setting
# the write community string enables both read and write access with that
# string.
#
# Be sure to understand the security implications of SNMPv2 - the community
# strings are readable on the wire!
#
begemotSnmpdCommunityString.0.1	= $(read)
# begemotSnmpdCommunityString.0.2	= $(write)
begemotSnmpdCommunityDisable	= 1

# open standard SNMP ports
begemotSnmpdPortStatus.0.0.0.0.161 = 1

# open a unix domain socket
begemotSnmpdLocalPortStatus."/var/run/snmpd.sock" = 1
begemotSnmpdLocalPortType."/var/run/snmpd.sock" = 4

# send traps to the traphost
begemotTrapSinkStatus.[$(traphost)].$(trapport) = 4
begemotTrapSinkVersion.[$(traphost)].$(trapport) = 2
begemotTrapSinkComm.[$(traphost)].$(trapport) = $(trap)

sysContact	= $(contact)
sysLocation	= $(location)
sysObjectId 	= 1.3.6.1.4.1.12325.1.1.2.1.$(system)

snmpEnableAuthenTraps = 2

#
# Load MIB-2 module
#
begemotSnmpdModulePath."mibII"	= "/usr/lib/snmp_mibII.so"

# Force a polling rate for the 64-bit interface counters in case
# the automatic computation is wrong (which may be the case if an interface
# announces the wrong bit rate via its MIB).
#%mibII
#begemotIfForcePoll = 2000

#
# SNMPv3 User-based security module - must be loaded for SNMPv3 USM
#
#begemotSnmpdModulePath."usm"	= "/usr/lib/snmp_usm.so"

#
# SNMPv3 USM User definition.
#

#%usm

#
# The following block creates a user with name "bsnmp" and sets privacy
# and encryption options to SHA256 message digests and AES encryption
# for this user.
# 
# usmUserStatus.$(engine).$(user1) = 5
# usmUserAuthProtocol.$(engine).$(user1) = $(HMACSHAAuthProtocol)
# usmUserAuthKeyChange.$(engine).$(user1) = $(user1passwd)
# usmUserPrivProtocol.$(engine).$(user1) = $(AesCfb128Protocol)
# usmUserPrivKeyChange.$(engine).$(user1) = $(user1passwd)
# usmUserStatus.$(engine).$(user1) = 1
#

#
# The following block creates a user with name "public" with no authentication
# or encyption options.
#
# usmUserStatus.$(engine).$(read) = 5
# usmUserAuthProtocol.$(engine).$(read) = $(NoAuthProtocol)
# usmUserPrivProtocol.$(engine).$(read) = $(NoPrivProtocol)
# usmUserStatus.$(engine).$(read) = 1
#

#
# SNMPv3 View-based Access Control module
#
#begemotSnmpdModulePath."vacm"	= "/usr/lib/snmp_vacm.so"

#
# Definition of view-based access control entries.
#
#%vacm

# Definition of a SNMPv1 group
# vacmSecurityToGroupStatus.1.$(read) = 4
# vacmGroupName.1.$(read) = $(read)

# Definition of SNMPv2 group
# vacmSecurityToGroupStatus.2.$(write) = 4
# vacmGroupName.2.$(write) = $(write)

# Definition of SNMPv3 group with users "bsnmp" and "public"
# vacmSecurityToGroupStatus.3.$(user1) = 4
# vacmGroupName.3.$(user1) = $(write)
# vacmSecurityToGroupStatus.3.$(read) = 4
# vacmGroupName.3.$(read) = $(write)

# 
# The OID of the .iso.org.dod.internet subtree
#
# internetoid := 1.3.6.1
# internetoidlen := 4

# Enumerated values for the privacy options
# noAuthNoPriv := 1
# authNoPriv := 2
# authPriv := 3

#
# Definitions of two views
#
# vacmViewTreeFamilyStatus."internet".$(internetoidlen).$(internetoid) = 4
# vacmViewTreeFamilyStatus."restricted".$(internetoidlen).$(internetoid) = 4

#
# Access control
#

#
# Read-only access for SNMPv1 users
#
# vacmAccessStatus.$(read)."".1.1 = 4
# vacmAccessReadViewName.$(read)."".1.1 = "internet"

#
# Read-write access for SNMPv2 users 
#
# vacmAccessStatus.$(write)."".2.1 = 4
# vacmAccessReadViewName.$(write)."".2.1 = "internet"
# vacmAccessWriteViewName.$(write)."".2.1 = "internet"

#
# Read-write-notify access for SNMPv3 USM users with noAuthNoPriv
#
# vacmAccessStatus.$(write)."".3.$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(write)."".3.$(noAuthNoPriv) = "internet"
# vacmAccessWriteViewName.$(write)."".3.$(noAuthNoPriv) = "internet"
# vacmAccessNotifyViewName.$(write)."".3.$(noAuthNoPriv) = "internet"

#
#Read-write-notify access to restricted for SNMPv3 USM users with authPriv
#
# vacmAccessStatus.$(write)."".3.$(authPriv) = 4
# vacmAccessReadViewName.$(write)."".3.$(authPriv) = "restricted"
# vacmAccessWriteViewName.$(write)."".3.$(authPriv) = "restricted"
# vacmAccessNotifyViewName.$(write)."".3.$(authPriv) = "restricted"

# Netgraph module
#
#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"
#
#%netgraph
#begemotNgControlNodeName = "snmpd"

#
# pf(4) module
#
#begemotSnmpdModulePath."pf"	= "/usr/lib/snmp_pf.so"

#
# Host resources module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so"

#
# Bridge module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"

#
# Wireless module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so"