freebsd-skq/sys/dev/nxge/xgehal/xgehal-config.c

754 lines
24 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2002-2007 Neterion, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <dev/nxge/include/xgehal-config.h>
#include <dev/nxge/include/xge-debug.h>
/*
* __hal_tti_config_check - Check tti configuration
* @new_config: tti configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_tti_config_check (xge_hal_tti_config_t *new_config)
{
if ((new_config->urange_a < XGE_HAL_MIN_TX_URANGE_A) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->urange_a > XGE_HAL_MAX_TX_URANGE_A)) {
return XGE_HAL_BADCFG_TX_URANGE_A;
}
if ((new_config->ufc_a < XGE_HAL_MIN_TX_UFC_A) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_a > XGE_HAL_MAX_TX_UFC_A)) {
return XGE_HAL_BADCFG_TX_UFC_A;
}
if ((new_config->urange_b < XGE_HAL_MIN_TX_URANGE_B) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->urange_b > XGE_HAL_MAX_TX_URANGE_B)) {
return XGE_HAL_BADCFG_TX_URANGE_B;
}
if ((new_config->ufc_b < XGE_HAL_MIN_TX_UFC_B) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_b > XGE_HAL_MAX_TX_UFC_B)) {
return XGE_HAL_BADCFG_TX_UFC_B;
}
if ((new_config->urange_c < XGE_HAL_MIN_TX_URANGE_C) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->urange_c > XGE_HAL_MAX_TX_URANGE_C)) {
return XGE_HAL_BADCFG_TX_URANGE_C;
}
if ((new_config->ufc_c < XGE_HAL_MIN_TX_UFC_C) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_c > XGE_HAL_MAX_TX_UFC_C)) {
return XGE_HAL_BADCFG_TX_UFC_C;
}
if ((new_config->ufc_d < XGE_HAL_MIN_TX_UFC_D) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_d > XGE_HAL_MAX_TX_UFC_D)) {
return XGE_HAL_BADCFG_TX_UFC_D;
}
if ((new_config->timer_val_us < XGE_HAL_MIN_TX_TIMER_VAL) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->timer_val_us > XGE_HAL_MAX_TX_TIMER_VAL)) {
return XGE_HAL_BADCFG_TX_TIMER_VAL;
}
if ((new_config->timer_ci_en < XGE_HAL_MIN_TX_TIMER_CI_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->timer_ci_en > XGE_HAL_MAX_TX_TIMER_CI_EN)) {
return XGE_HAL_BADCFG_TX_TIMER_CI_EN;
}
if ((new_config->timer_ac_en < XGE_HAL_MIN_TX_TIMER_AC_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->timer_ac_en > XGE_HAL_MAX_TX_TIMER_AC_EN)) {
return XGE_HAL_BADCFG_TX_TIMER_AC_EN;
}
return XGE_HAL_OK;
}
/*
* __hal_rti_config_check - Check rti configuration
* @new_config: rti configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_rti_config_check (xge_hal_rti_config_t *new_config)
{
if ((new_config->urange_a < XGE_HAL_MIN_RX_URANGE_A) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->urange_a > XGE_HAL_MAX_RX_URANGE_A)) {
return XGE_HAL_BADCFG_RX_URANGE_A;
}
if ((new_config->ufc_a < XGE_HAL_MIN_RX_UFC_A) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_a > XGE_HAL_MAX_RX_UFC_A)) {
return XGE_HAL_BADCFG_RX_UFC_A;
}
if ((new_config->urange_b < XGE_HAL_MIN_RX_URANGE_B) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->urange_b > XGE_HAL_MAX_RX_URANGE_B)) {
return XGE_HAL_BADCFG_RX_URANGE_B;
}
if ((new_config->ufc_b < XGE_HAL_MIN_RX_UFC_B) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_b > XGE_HAL_MAX_RX_UFC_B)) {
return XGE_HAL_BADCFG_RX_UFC_B;
}
if ((new_config->urange_c < XGE_HAL_MIN_RX_URANGE_C) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->urange_c > XGE_HAL_MAX_RX_URANGE_C)) {
return XGE_HAL_BADCFG_RX_URANGE_C;
}
if ((new_config->ufc_c < XGE_HAL_MIN_RX_UFC_C) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_c > XGE_HAL_MAX_RX_UFC_C)) {
return XGE_HAL_BADCFG_RX_UFC_C;
}
if ((new_config->ufc_d < XGE_HAL_MIN_RX_UFC_D) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->ufc_d > XGE_HAL_MAX_RX_UFC_D)) {
return XGE_HAL_BADCFG_RX_UFC_D;
}
if ((new_config->timer_val_us < XGE_HAL_MIN_RX_TIMER_VAL) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->timer_val_us > XGE_HAL_MAX_RX_TIMER_VAL)) {
return XGE_HAL_BADCFG_RX_TIMER_VAL;
}
if ((new_config->timer_ac_en < XGE_HAL_MIN_RX_TIMER_AC_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->timer_ac_en > XGE_HAL_MAX_RX_TIMER_AC_EN)) {
return XGE_HAL_BADCFG_RX_TIMER_AC_EN;
}
return XGE_HAL_OK;
}
/*
* __hal_fifo_queue_check - Check fifo queue configuration
* @new_config: fifo queue configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_fifo_queue_check (xge_hal_fifo_config_t *new_config,
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
xge_hal_fifo_queue_t *new_queue)
{
int i;
if ((new_queue->initial < XGE_HAL_MIN_FIFO_QUEUE_LENGTH) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_queue->initial > XGE_HAL_MAX_FIFO_QUEUE_LENGTH)) {
return XGE_HAL_BADCFG_FIFO_QUEUE_INITIAL_LENGTH;
}
/* FIXME: queue "grow" feature is not supported.
* Use "initial" queue size as the "maximum";
* Remove the next line when fixed. */
new_queue->max = new_queue->initial;
if ((new_queue->max < XGE_HAL_MIN_FIFO_QUEUE_LENGTH) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_queue->max > XGE_HAL_MAX_FIFO_QUEUE_LENGTH)) {
return XGE_HAL_BADCFG_FIFO_QUEUE_MAX_LENGTH;
}
if (new_queue->max < new_config->reserve_threshold) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return XGE_HAL_BADCFG_FIFO_RESERVE_THRESHOLD;
}
if ((new_queue->intr < XGE_HAL_MIN_FIFO_QUEUE_INTR) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_queue->intr > XGE_HAL_MAX_FIFO_QUEUE_INTR)) {
return XGE_HAL_BADCFG_FIFO_QUEUE_INTR;
}
if ((new_queue->intr_vector < XGE_HAL_MIN_FIFO_QUEUE_INTR_VECTOR) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_queue->intr_vector > XGE_HAL_MAX_FIFO_QUEUE_INTR_VECTOR)) {
return XGE_HAL_BADCFG_FIFO_QUEUE_INTR_VECTOR;
}
for(i = 0; i < XGE_HAL_MAX_FIFO_TTI_NUM; i++) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
/*
* Validate the tti configuration parameters only if
* the TTI feature is enabled.
*/
if (new_queue->tti[i].enabled) {
xge_hal_status_e status;
if ((status = __hal_tti_config_check(
&new_queue->tti[i])) != XGE_HAL_OK) {
return status;
}
}
}
return XGE_HAL_OK;
}
/*
* __hal_ring_queue_check - Check ring queue configuration
* @new_config: ring queue configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_ring_queue_check (xge_hal_ring_queue_t *new_config)
{
if ((new_config->initial < XGE_HAL_MIN_RING_QUEUE_BLOCKS) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->initial > XGE_HAL_MAX_RING_QUEUE_BLOCKS)) {
return XGE_HAL_BADCFG_RING_QUEUE_INITIAL_BLOCKS;
}
/* FIXME: queue "grow" feature is not supported.
* Use "initial" queue size as the "maximum";
* Remove the next line when fixed. */
new_config->max = new_config->initial;
if ((new_config->max < XGE_HAL_MIN_RING_QUEUE_BLOCKS) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->max > XGE_HAL_MAX_RING_QUEUE_BLOCKS)) {
return XGE_HAL_BADCFG_RING_QUEUE_MAX_BLOCKS;
}
if ((new_config->buffer_mode != XGE_HAL_RING_QUEUE_BUFFER_MODE_1) &&
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->buffer_mode != XGE_HAL_RING_QUEUE_BUFFER_MODE_3) &&
(new_config->buffer_mode != XGE_HAL_RING_QUEUE_BUFFER_MODE_5)) {
return XGE_HAL_BADCFG_RING_QUEUE_BUFFER_MODE;
}
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
/*
* Herc has less DRAM; the check is done later inside
* device_initialize()
*/
if (((new_config->dram_size_mb < XGE_HAL_MIN_RING_QUEUE_SIZE) ||
(new_config->dram_size_mb > XGE_HAL_MAX_RING_QUEUE_SIZE_XENA)) &&
new_config->dram_size_mb != XGE_HAL_DEFAULT_USE_HARDCODE)
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return XGE_HAL_BADCFG_RING_QUEUE_SIZE;
if ((new_config->backoff_interval_us <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_BACKOFF_INTERVAL_US) ||
(new_config->backoff_interval_us >
XGE_HAL_MAX_BACKOFF_INTERVAL_US)) {
return XGE_HAL_BADCFG_BACKOFF_INTERVAL_US;
}
if ((new_config->max_frm_len < XGE_HAL_MIN_MAX_FRM_LEN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->max_frm_len > XGE_HAL_MAX_MAX_FRM_LEN)) {
return XGE_HAL_BADCFG_MAX_FRM_LEN;
}
if ((new_config->priority < XGE_HAL_MIN_RING_PRIORITY) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->priority > XGE_HAL_MAX_RING_PRIORITY)) {
return XGE_HAL_BADCFG_RING_PRIORITY;
}
if ((new_config->rth_en < XGE_HAL_MIN_RING_RTH_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rth_en > XGE_HAL_MAX_RING_RTH_EN)) {
return XGE_HAL_BADCFG_RING_RTH_EN;
}
if ((new_config->rts_mac_en < XGE_HAL_MIN_RING_RTS_MAC_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rts_mac_en > XGE_HAL_MAX_RING_RTS_MAC_EN)) {
return XGE_HAL_BADCFG_RING_RTS_MAC_EN;
}
if ((new_config->rts_mac_en < XGE_HAL_MIN_RING_RTS_PORT_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rts_mac_en > XGE_HAL_MAX_RING_RTS_PORT_EN)) {
return XGE_HAL_BADCFG_RING_RTS_PORT_EN;
}
if ((new_config->intr_vector < XGE_HAL_MIN_RING_QUEUE_INTR_VECTOR) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->intr_vector > XGE_HAL_MAX_RING_QUEUE_INTR_VECTOR)) {
return XGE_HAL_BADCFG_RING_QUEUE_INTR_VECTOR;
}
if (new_config->indicate_max_pkts <
XGE_HAL_MIN_RING_INDICATE_MAX_PKTS ||
new_config->indicate_max_pkts >
XGE_HAL_MAX_RING_INDICATE_MAX_PKTS) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return XGE_HAL_BADCFG_RING_INDICATE_MAX_PKTS;
}
return __hal_rti_config_check(&new_config->rti);
}
/*
* __hal_mac_config_check - Check mac configuration
* @new_config: mac configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_mac_config_check (xge_hal_mac_config_t *new_config)
{
if ((new_config->tmac_util_period < XGE_HAL_MIN_TMAC_UTIL_PERIOD) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->tmac_util_period > XGE_HAL_MAX_TMAC_UTIL_PERIOD)) {
return XGE_HAL_BADCFG_TMAC_UTIL_PERIOD;
}
if ((new_config->rmac_util_period < XGE_HAL_MIN_RMAC_UTIL_PERIOD) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rmac_util_period > XGE_HAL_MAX_RMAC_UTIL_PERIOD)) {
return XGE_HAL_BADCFG_RMAC_UTIL_PERIOD;
}
if ((new_config->rmac_bcast_en < XGE_HAL_MIN_RMAC_BCAST_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rmac_bcast_en > XGE_HAL_MAX_RMAC_BCAST_EN)) {
return XGE_HAL_BADCFG_RMAC_BCAST_EN;
}
if ((new_config->rmac_pause_gen_en < XGE_HAL_MIN_RMAC_PAUSE_GEN_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rmac_pause_gen_en>XGE_HAL_MAX_RMAC_PAUSE_GEN_EN)) {
return XGE_HAL_BADCFG_RMAC_PAUSE_GEN_EN;
}
if ((new_config->rmac_pause_rcv_en < XGE_HAL_MIN_RMAC_PAUSE_RCV_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rmac_pause_rcv_en>XGE_HAL_MAX_RMAC_PAUSE_RCV_EN)) {
return XGE_HAL_BADCFG_RMAC_PAUSE_RCV_EN;
}
if ((new_config->rmac_pause_time < XGE_HAL_MIN_RMAC_HIGH_PTIME) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rmac_pause_time > XGE_HAL_MAX_RMAC_HIGH_PTIME)) {
return XGE_HAL_BADCFG_RMAC_HIGH_PTIME;
}
if ((new_config->media < XGE_HAL_MIN_MEDIA) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->media > XGE_HAL_MAX_MEDIA)) {
return XGE_HAL_BADCFG_MEDIA;
}
if ((new_config->mc_pause_threshold_q0q3 <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_MC_PAUSE_THRESHOLD_Q0Q3) ||
(new_config->mc_pause_threshold_q0q3 >
XGE_HAL_MAX_MC_PAUSE_THRESHOLD_Q0Q3)) {
return XGE_HAL_BADCFG_MC_PAUSE_THRESHOLD_Q0Q3;
}
if ((new_config->mc_pause_threshold_q4q7 <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_MC_PAUSE_THRESHOLD_Q4Q7) ||
(new_config->mc_pause_threshold_q4q7 >
XGE_HAL_MAX_MC_PAUSE_THRESHOLD_Q4Q7)) {
return XGE_HAL_BADCFG_MC_PAUSE_THRESHOLD_Q4Q7;
}
return XGE_HAL_OK;
}
/*
* __hal_fifo_config_check - Check fifo configuration
* @new_config: fifo configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_fifo_config_check (xge_hal_fifo_config_t *new_config)
{
int i;
int total_fifo_length = 0;
/*
* recompute max_frags to be multiple of 4,
* which means, multiple of 128 for TxDL
*/
new_config->max_frags = ((new_config->max_frags + 3) >> 2) << 2;
if ((new_config->max_frags < XGE_HAL_MIN_FIFO_FRAGS) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->max_frags > XGE_HAL_MAX_FIFO_FRAGS)) {
return XGE_HAL_BADCFG_FIFO_FRAGS;
}
if ((new_config->reserve_threshold <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_FIFO_RESERVE_THRESHOLD) ||
(new_config->reserve_threshold >
XGE_HAL_MAX_FIFO_RESERVE_THRESHOLD)) {
return XGE_HAL_BADCFG_FIFO_RESERVE_THRESHOLD;
}
if ((new_config->memblock_size < XGE_HAL_MIN_FIFO_MEMBLOCK_SIZE) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->memblock_size > XGE_HAL_MAX_FIFO_MEMBLOCK_SIZE)) {
return XGE_HAL_BADCFG_FIFO_MEMBLOCK_SIZE;
}
for(i = 0; i < XGE_HAL_MAX_FIFO_NUM; i++) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
xge_hal_status_e status;
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if (!new_config->queue[i].configured)
continue;
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if ((status = __hal_fifo_queue_check(new_config,
&new_config->queue[i])) != XGE_HAL_OK) {
return status;
}
total_fifo_length += new_config->queue[i].max;
}
if(total_fifo_length > XGE_HAL_MAX_FIFO_QUEUE_LENGTH){
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return XGE_HAL_BADCFG_FIFO_QUEUE_MAX_LENGTH;
}
return XGE_HAL_OK;
}
/*
* __hal_ring_config_check - Check ring configuration
* @new_config: Ring configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
static xge_hal_status_e
__hal_ring_config_check (xge_hal_ring_config_t *new_config)
{
int i;
if ((new_config->memblock_size < XGE_HAL_MIN_RING_MEMBLOCK_SIZE) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->memblock_size > XGE_HAL_MAX_RING_MEMBLOCK_SIZE)) {
return XGE_HAL_BADCFG_RING_MEMBLOCK_SIZE;
}
for(i = 0; i < XGE_HAL_MAX_RING_NUM; i++) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
xge_hal_status_e status;
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if (!new_config->queue[i].configured)
continue;
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if ((status = __hal_ring_queue_check(&new_config->queue[i]))
!= XGE_HAL_OK) {
return status;
}
}
return XGE_HAL_OK;
}
/*
* __hal_device_config_check_common - Check device configuration.
* @new_config: Device configuration information
*
* Check part of configuration that is common to
* Xframe-I and Xframe-II.
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*
* See also: __hal_device_config_check_xena().
*/
xge_hal_status_e
__hal_device_config_check_common (xge_hal_device_config_t *new_config)
{
xge_hal_status_e status;
if ((new_config->mtu < XGE_HAL_MIN_MTU) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->mtu > XGE_HAL_MAX_MTU)) {
return XGE_HAL_BADCFG_MAX_MTU;
}
if ((new_config->bimodal_interrupts < XGE_HAL_BIMODAL_INTR_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->bimodal_interrupts > XGE_HAL_BIMODAL_INTR_MAX)) {
return XGE_HAL_BADCFG_BIMODAL_INTR;
}
if (new_config->bimodal_interrupts &&
((new_config->bimodal_timer_lo_us < XGE_HAL_BIMODAL_TIMER_LO_US_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->bimodal_timer_lo_us > XGE_HAL_BIMODAL_TIMER_LO_US_MAX))) {
return XGE_HAL_BADCFG_BIMODAL_TIMER_LO_US;
}
if (new_config->bimodal_interrupts &&
((new_config->bimodal_timer_hi_us < XGE_HAL_BIMODAL_TIMER_HI_US_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->bimodal_timer_hi_us > XGE_HAL_BIMODAL_TIMER_HI_US_MAX))) {
return XGE_HAL_BADCFG_BIMODAL_TIMER_HI_US;
}
if ((new_config->no_isr_events < XGE_HAL_NO_ISR_EVENTS_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->no_isr_events > XGE_HAL_NO_ISR_EVENTS_MAX)) {
return XGE_HAL_BADCFG_NO_ISR_EVENTS;
}
if ((new_config->isr_polling_cnt < XGE_HAL_MIN_ISR_POLLING_CNT) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->isr_polling_cnt > XGE_HAL_MAX_ISR_POLLING_CNT)) {
return XGE_HAL_BADCFG_ISR_POLLING_CNT;
}
if (new_config->latency_timer &&
new_config->latency_timer != XGE_HAL_USE_BIOS_DEFAULT_LATENCY) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if ((new_config->latency_timer < XGE_HAL_MIN_LATENCY_TIMER) ||
(new_config->latency_timer > XGE_HAL_MAX_LATENCY_TIMER)) {
return XGE_HAL_BADCFG_LATENCY_TIMER;
}
}
if (new_config->max_splits_trans != XGE_HAL_USE_BIOS_DEFAULT_SPLITS) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if ((new_config->max_splits_trans <
XGE_HAL_ONE_SPLIT_TRANSACTION) ||
(new_config->max_splits_trans >
XGE_HAL_THIRTYTWO_SPLIT_TRANSACTION))
return XGE_HAL_BADCFG_MAX_SPLITS_TRANS;
}
if (new_config->mmrb_count != XGE_HAL_DEFAULT_BIOS_MMRB_COUNT)
{
if ((new_config->mmrb_count < XGE_HAL_MIN_MMRB_COUNT) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->mmrb_count > XGE_HAL_MAX_MMRB_COUNT)) {
return XGE_HAL_BADCFG_MMRB_COUNT;
}
}
if ((new_config->shared_splits < XGE_HAL_MIN_SHARED_SPLITS) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->shared_splits > XGE_HAL_MAX_SHARED_SPLITS)) {
return XGE_HAL_BADCFG_SHARED_SPLITS;
}
if (new_config->stats_refresh_time_sec !=
XGE_HAL_STATS_REFRESH_DISABLE) {
if ((new_config->stats_refresh_time_sec <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_STATS_REFRESH_TIME) ||
(new_config->stats_refresh_time_sec >
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MAX_STATS_REFRESH_TIME)) {
return XGE_HAL_BADCFG_STATS_REFRESH_TIME;
}
}
if ((new_config->intr_mode != XGE_HAL_INTR_MODE_IRQLINE) &&
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->intr_mode != XGE_HAL_INTR_MODE_MSI) &&
(new_config->intr_mode != XGE_HAL_INTR_MODE_MSIX)) {
return XGE_HAL_BADCFG_INTR_MODE;
}
if ((new_config->sched_timer_us < XGE_HAL_SCHED_TIMER_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->sched_timer_us > XGE_HAL_SCHED_TIMER_MAX)) {
return XGE_HAL_BADCFG_SCHED_TIMER_US;
}
if ((new_config->sched_timer_one_shot !=
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_SCHED_TIMER_ON_SHOT_DISABLE) &&
(new_config->sched_timer_one_shot !=
XGE_HAL_SCHED_TIMER_ON_SHOT_ENABLE)) {
return XGE_HAL_BADCFG_SCHED_TIMER_ON_SHOT;
}
/*
* Check adaptive schema parameters. Note that there are two
* configuration variables needs to be enabled in ULD:
*
* a) sched_timer_us should not be zero;
* b) rxufca_hi_lim should not be equal to rxufca_lo_lim.
*
* The code bellow checking for those conditions.
*/
if (new_config->sched_timer_us &&
new_config->rxufca_hi_lim != new_config->rxufca_lo_lim) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
if ((new_config->rxufca_intr_thres <
XGE_HAL_RXUFCA_INTR_THRES_MIN) ||
(new_config->rxufca_intr_thres >
XGE_HAL_RXUFCA_INTR_THRES_MAX)) {
return XGE_HAL_BADCFG_RXUFCA_INTR_THRES;
}
if ((new_config->rxufca_hi_lim < XGE_HAL_RXUFCA_HI_LIM_MIN) ||
(new_config->rxufca_hi_lim > XGE_HAL_RXUFCA_HI_LIM_MAX)) {
return XGE_HAL_BADCFG_RXUFCA_HI_LIM;
}
if ((new_config->rxufca_lo_lim < XGE_HAL_RXUFCA_LO_LIM_MIN) ||
(new_config->rxufca_lo_lim > XGE_HAL_RXUFCA_LO_LIM_MAX) ||
(new_config->rxufca_lo_lim > new_config->rxufca_hi_lim)) {
return XGE_HAL_BADCFG_RXUFCA_LO_LIM;
}
if ((new_config->rxufca_lbolt_period <
XGE_HAL_RXUFCA_LBOLT_PERIOD_MIN) ||
(new_config->rxufca_lbolt_period >
XGE_HAL_RXUFCA_LBOLT_PERIOD_MAX)) {
return XGE_HAL_BADCFG_RXUFCA_LBOLT_PERIOD;
}
}
if ((new_config->link_valid_cnt < XGE_HAL_LINK_VALID_CNT_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->link_valid_cnt > XGE_HAL_LINK_VALID_CNT_MAX)) {
return XGE_HAL_BADCFG_LINK_VALID_CNT;
}
if ((new_config->link_retry_cnt < XGE_HAL_LINK_RETRY_CNT_MIN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->link_retry_cnt > XGE_HAL_LINK_RETRY_CNT_MAX)) {
return XGE_HAL_BADCFG_LINK_RETRY_CNT;
}
if (new_config->link_valid_cnt > new_config->link_retry_cnt)
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return XGE_HAL_BADCFG_LINK_VALID_CNT;
if (new_config->link_stability_period != XGE_HAL_DEFAULT_USE_HARDCODE) {
if ((new_config->link_stability_period <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_LINK_STABILITY_PERIOD) ||
(new_config->link_stability_period >
XGE_HAL_MAX_LINK_STABILITY_PERIOD)) {
return XGE_HAL_BADCFG_LINK_STABILITY_PERIOD;
}
}
if (new_config->device_poll_millis !=
XGE_HAL_DEFAULT_USE_HARDCODE) {
if ((new_config->device_poll_millis <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_DEVICE_POLL_MILLIS) ||
(new_config->device_poll_millis >
XGE_HAL_MAX_DEVICE_POLL_MILLIS)) {
return XGE_HAL_BADCFG_DEVICE_POLL_MILLIS;
}
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
}
if ((new_config->rts_port_en < XGE_HAL_MIN_RING_RTS_PORT_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rts_port_en > XGE_HAL_MAX_RING_RTS_PORT_EN)) {
return XGE_HAL_BADCFG_RTS_PORT_EN;
}
if ((new_config->rts_qos_en < XGE_HAL_RTS_QOS_DISABLE) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->rts_qos_en > XGE_HAL_RTS_QOS_ENABLE)) {
return XGE_HAL_BADCFG_RTS_QOS_EN;
}
#if defined(XGE_HAL_CONFIG_LRO)
if (new_config->lro_sg_size !=
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_DEFAULT_USE_HARDCODE) {
if ((new_config->lro_sg_size < XGE_HAL_LRO_MIN_SG_SIZE) ||
(new_config->lro_sg_size > XGE_HAL_LRO_MAX_SG_SIZE)) {
return XGE_HAL_BADCFG_LRO_SG_SIZE;
}
}
if (new_config->lro_frm_len !=
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_DEFAULT_USE_HARDCODE) {
if ((new_config->lro_frm_len < XGE_HAL_LRO_MIN_FRM_LEN) ||
(new_config->lro_frm_len > XGE_HAL_LRO_MAX_FRM_LEN)) {
return XGE_HAL_BADCFG_LRO_FRM_LEN;
}
}
#endif
if ((status = __hal_ring_config_check(&new_config->ring))
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
!= XGE_HAL_OK) {
return status;
}
if ((status = __hal_mac_config_check(&new_config->mac)) !=
XGE_HAL_OK) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return status;
}
if ((status = __hal_fifo_config_check(&new_config->fifo)) !=
XGE_HAL_OK) {
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
return status;
}
return XGE_HAL_OK;
}
/*
* __hal_device_config_check_xena - Check Xframe-I configuration
* @new_config: Device configuration.
*
* Check part of configuration that is relevant only to Xframe-I.
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*
* See also: __hal_device_config_check_common().
*/
xge_hal_status_e
__hal_device_config_check_xena (xge_hal_device_config_t *new_config)
{
if ((new_config->pci_freq_mherz != XGE_HAL_PCI_FREQ_MHERZ_33) &&
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->pci_freq_mherz != XGE_HAL_PCI_FREQ_MHERZ_66) &&
(new_config->pci_freq_mherz != XGE_HAL_PCI_FREQ_MHERZ_100) &&
(new_config->pci_freq_mherz != XGE_HAL_PCI_FREQ_MHERZ_133) &&
(new_config->pci_freq_mherz != XGE_HAL_PCI_FREQ_MHERZ_266) &&
(new_config->pci_freq_mherz != XGE_HAL_DEFAULT_USE_HARDCODE)) {
return XGE_HAL_BADCFG_PCI_FREQ_MHERZ;
}
return XGE_HAL_OK;
}
/*
* __hal_device_config_check_herc - Check device configuration
* @new_config: Device configuration.
*
* Check part of configuration that is relevant only to Xframe-II.
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*
* See also: __hal_device_config_check_common().
*/
xge_hal_status_e
__hal_device_config_check_herc (xge_hal_device_config_t *new_config)
{
return XGE_HAL_OK;
}
/*
* __hal_driver_config_check - Check HAL configuration
* @new_config: Driver configuration information
*
* Returns: XGE_HAL_OK - success,
* otherwise one of the xge_hal_status_e{} enumerated error codes.
*/
xge_hal_status_e
__hal_driver_config_check (xge_hal_driver_config_t *new_config)
{
if ((new_config->queue_size_initial <
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MIN_QUEUE_SIZE_INITIAL) ||
(new_config->queue_size_initial >
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
XGE_HAL_MAX_QUEUE_SIZE_INITIAL)) {
return XGE_HAL_BADCFG_QUEUE_SIZE_INITIAL;
}
if ((new_config->queue_size_max < XGE_HAL_MIN_QUEUE_SIZE_MAX) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->queue_size_max > XGE_HAL_MAX_QUEUE_SIZE_MAX)) {
return XGE_HAL_BADCFG_QUEUE_SIZE_MAX;
}
#ifdef XGE_TRACE_INTO_CIRCULAR_ARR
if ((new_config->tracebuf_size < XGE_HAL_MIN_CIRCULAR_ARR) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->tracebuf_size > XGE_HAL_MAX_CIRCULAR_ARR)) {
return XGE_HAL_BADCFG_TRACEBUF_SIZE;
}
if ((new_config->tracebuf_timestamp_en < XGE_HAL_MIN_TIMESTAMP_EN) ||
Merge Neterion if_nxge driver version 2.0.9.11230 with the following changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
2007-10-29 14:19:32 +00:00
(new_config->tracebuf_timestamp_en > XGE_HAL_MAX_TIMESTAMP_EN)) {
return XGE_HAL_BADCFG_TRACEBUF_SIZE;
}
#endif
return XGE_HAL_OK;
}