freebsd-skq/contrib/tcpdump/print-sctp.c

408 lines
12 KiB
C
Raw Normal View History

/* Copyright (c) 2001 NETLAB, Temple University
* Copyright (c) 2001 Protocol Engineering Lab, University of Delaware
*
* Jerry Heinz <gheinz@astro.temple.edu>
* John Fiore <jfiore@joda.cis.temple.edu>
* Armando L. Caro Jr. <acaro@cis.udel.edu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the University nor of the Laboratory may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
static const char rcsid[] _U_ =
2009-03-21 16:23:46 +00:00
"@(#) $Header: /tcpdump/master/tcpdump/print-sctp.c,v 1.21 2007-09-13 18:03:49 guy Exp $ (NETLAB/PEL)";
#endif
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <tcpdump-stdinc.h>
#include "sctpHeader.h"
#include "sctpConstants.h"
#include <assert.h>
#include <stdio.h>
#include <string.h>
#include "interface.h"
#include "addrtoname.h"
#include "extract.h" /* must come after interface.h */
#include "ip.h"
#ifdef INET6
#include "ip6.h"
#endif
2012-05-14 08:01:48 +00:00
#define CHAN_HP 6704
#define CHAN_MP 6705
#define CHAN_LP 6706
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct tok ForCES_channels[] = {
{ CHAN_HP, "ForCES HP" },
{ CHAN_MP, "ForCES MP" },
{ CHAN_LP, "ForCES LP" },
{ 0, NULL }
};
static inline int isForCES_port(u_short Port)
{
if (Port == CHAN_HP)
return 1;
if (Port == CHAN_MP)
return 1;
if (Port == CHAN_LP)
return 1;
return 0;
}
void sctp_print(const u_char *bp, /* beginning of sctp packet */
const u_char *bp2, /* beginning of enclosing */
u_int sctpPacketLength) /* ip packet */
{
const struct sctpHeader *sctpPktHdr;
const struct ip *ip;
#ifdef INET6
const struct ip6_hdr *ip6;
#endif
const void *endPacketPtr;
u_short sourcePort, destPort;
int chunkCount;
const struct sctpChunkDesc *chunkDescPtr;
const void *nextChunk;
const char *sep;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
int isforces = 0;
sctpPktHdr = (const struct sctpHeader*) bp;
endPacketPtr = (const u_char*)sctpPktHdr+sctpPacketLength;
if( (u_long) endPacketPtr > (u_long) snapend)
endPacketPtr = (const void *) snapend;
ip = (struct ip *)bp2;
#ifdef INET6
if (IP_V(ip) == 6)
ip6 = (const struct ip6_hdr *)bp2;
else
ip6 = NULL;
#endif /*INET6*/
TCHECK(*sctpPktHdr);
if (sctpPacketLength < sizeof(struct sctpHeader))
{
(void)printf("truncated-sctp - %ld bytes missing!",
(long)sctpPacketLength-sizeof(struct sctpHeader));
return;
}
/* sctpPacketLength -= sizeof(struct sctpHeader); packet length */
/* is now only as long as the payload */
sourcePort = EXTRACT_16BITS(&sctpPktHdr->source);
destPort = EXTRACT_16BITS(&sctpPktHdr->destination);
#ifdef INET6
if (ip6) {
(void)printf("%s.%d > %s.%d: sctp",
ip6addr_string(&ip6->ip6_src),
sourcePort,
ip6addr_string(&ip6->ip6_dst),
destPort);
} else
#endif /*INET6*/
{
(void)printf("%s.%d > %s.%d: sctp",
ipaddr_string(&ip->ip_src),
sourcePort,
ipaddr_string(&ip->ip_dst),
destPort);
}
fflush(stdout);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (isForCES_port(sourcePort)) {
printf("[%s]", tok2str(ForCES_channels, NULL, sourcePort));
isforces = 1;
}
if (isForCES_port(destPort)) {
printf("[%s]", tok2str(ForCES_channels, NULL, destPort));
isforces = 1;
}
if (vflag >= 2)
sep = "\n\t";
else
sep = " (";
/* cycle through all chunks, printing information on each one */
for (chunkCount = 0,
chunkDescPtr = (const struct sctpChunkDesc *)
((const u_char*) sctpPktHdr + sizeof(struct sctpHeader));
chunkDescPtr != NULL &&
( (const void *)
((const u_char *) chunkDescPtr + sizeof(struct sctpChunkDesc))
<= endPacketPtr);
chunkDescPtr = (const struct sctpChunkDesc *) nextChunk, chunkCount++)
{
u_int16_t chunkLength;
const u_char *chunkEnd;
u_int16_t align;
TCHECK(*chunkDescPtr);
chunkLength = EXTRACT_16BITS(&chunkDescPtr->chunkLength);
if (chunkLength < sizeof(*chunkDescPtr)) {
printf("%s%d) [Bad chunk length %u]", sep, chunkCount+1, chunkLength);
break;
}
TCHECK2(*((u_int8_t *)chunkDescPtr), chunkLength);
chunkEnd = ((const u_char*)chunkDescPtr + chunkLength);
align=chunkLength % 4;
if (align != 0)
align = 4 - align;
nextChunk = (const void *) (chunkEnd + align);
printf("%s%d) ", sep, chunkCount+1);
switch (chunkDescPtr->chunkID)
{
case SCTP_DATA :
{
const struct sctpDataPart *dataHdrPtr;
printf("[DATA] ");
if ((chunkDescPtr->chunkFlg & SCTP_DATA_UNORDERED)
== SCTP_DATA_UNORDERED)
printf("(U)");
if ((chunkDescPtr->chunkFlg & SCTP_DATA_FIRST_FRAG)
== SCTP_DATA_FIRST_FRAG)
printf("(B)");
if ((chunkDescPtr->chunkFlg & SCTP_DATA_LAST_FRAG)
== SCTP_DATA_LAST_FRAG)
printf("(E)");
if( ((chunkDescPtr->chunkFlg & SCTP_DATA_UNORDERED)
== SCTP_DATA_UNORDERED)
||
((chunkDescPtr->chunkFlg & SCTP_DATA_FIRST_FRAG)
== SCTP_DATA_FIRST_FRAG)
||
((chunkDescPtr->chunkFlg & SCTP_DATA_LAST_FRAG)
== SCTP_DATA_LAST_FRAG) )
printf(" ");
dataHdrPtr=(const struct sctpDataPart*)(chunkDescPtr+1);
printf("[TSN: %u] ", EXTRACT_32BITS(&dataHdrPtr->TSN));
printf("[SID: %u] ", EXTRACT_16BITS(&dataHdrPtr->streamId));
printf("[SSEQ %u] ", EXTRACT_16BITS(&dataHdrPtr->sequence));
printf("[PPID 0x%x] ", EXTRACT_32BITS(&dataHdrPtr->payloadtype));
fflush(stdout);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (isforces) {
const u_char *payloadPtr;
u_int chunksize = sizeof(struct sctpDataPart)+
sizeof(struct sctpChunkDesc);
payloadPtr = (const u_char *) (dataHdrPtr + 1);
if (EXTRACT_16BITS(&chunkDescPtr->chunkLength) <
sizeof(struct sctpDataPart)+
sizeof(struct sctpChunkDesc)+1) {
/* Less than 1 byte of chunk payload */
printf("bogus ForCES chunk length %u]",
EXTRACT_16BITS(&chunkDescPtr->chunkLength));
return;
}
forces_print(payloadPtr, EXTRACT_16BITS(&chunkDescPtr->chunkLength)- chunksize);
} else if (vflag >= 2) { /* if verbose output is specified */
/* at the command line */
const u_char *payloadPtr;
printf("[Payload");
2006-09-04 20:04:42 +00:00
if (!suppress_default_print) {
payloadPtr = (const u_char *) (++dataHdrPtr);
printf(":");
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (EXTRACT_16BITS(&chunkDescPtr->chunkLength) <
sizeof(struct sctpDataPart)+
sizeof(struct sctpChunkDesc)+1) {
2007-10-16 02:20:42 +00:00
/* Less than 1 byte of chunk payload */
printf("bogus chunk length %u]",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(&chunkDescPtr->chunkLength));
return;
}
default_print(payloadPtr,
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(&chunkDescPtr->chunkLength) -
(sizeof(struct sctpDataPart)+
2007-10-16 02:20:42 +00:00
sizeof(struct sctpChunkDesc)));
} else
printf("]");
}
break;
}
case SCTP_INITIATION :
{
const struct sctpInitiation *init;
printf("[INIT] ");
init=(const struct sctpInitiation*)(chunkDescPtr+1);
printf("[init tag: %u] ", EXTRACT_32BITS(&init->initTag));
printf("[rwnd: %u] ", EXTRACT_32BITS(&init->rcvWindowCredit));
printf("[OS: %u] ", EXTRACT_16BITS(&init->NumPreopenStreams));
printf("[MIS: %u] ", EXTRACT_16BITS(&init->MaxInboundStreams));
printf("[init TSN: %u] ", EXTRACT_32BITS(&init->initialTSN));
#if(0) /* ALC you can add code for optional params here */
if( (init+1) < chunkEnd )
printf(" @@@@@ UNFINISHED @@@@@@%s\n",
"Optional params present, but not printed.");
#endif
break;
}
case SCTP_INITIATION_ACK :
{
const struct sctpInitiation *init;
printf("[INIT ACK] ");
init=(const struct sctpInitiation*)(chunkDescPtr+1);
printf("[init tag: %u] ", EXTRACT_32BITS(&init->initTag));
printf("[rwnd: %u] ", EXTRACT_32BITS(&init->rcvWindowCredit));
printf("[OS: %u] ", EXTRACT_16BITS(&init->NumPreopenStreams));
printf("[MIS: %u] ", EXTRACT_16BITS(&init->MaxInboundStreams));
printf("[init TSN: %u] ", EXTRACT_32BITS(&init->initialTSN));
#if(0) /* ALC you can add code for optional params here */
if( (init+1) < chunkEnd )
printf(" @@@@@ UNFINISHED @@@@@@%s\n",
"Optional params present, but not printed.");
#endif
break;
}
case SCTP_SELECTIVE_ACK:
{
const struct sctpSelectiveAck *sack;
const struct sctpSelectiveFrag *frag;
int fragNo, tsnNo;
const u_char *dupTSN;
printf("[SACK] ");
sack=(const struct sctpSelectiveAck*)(chunkDescPtr+1);
printf("[cum ack %u] ", EXTRACT_32BITS(&sack->highestConseqTSN));
printf("[a_rwnd %u] ", EXTRACT_32BITS(&sack->updatedRwnd));
printf("[#gap acks %u] ", EXTRACT_16BITS(&sack->numberOfdesc));
printf("[#dup tsns %u] ", EXTRACT_16BITS(&sack->numDupTsns));
/* print gaps */
for (frag = ( (const struct sctpSelectiveFrag *)
((const struct sctpSelectiveAck *) sack+1)),
fragNo=0;
(const void *)frag < nextChunk && fragNo < EXTRACT_16BITS(&sack->numberOfdesc);
frag++, fragNo++)
printf("\n\t\t[gap ack block #%d: start = %u, end = %u] ",
fragNo+1,
EXTRACT_32BITS(&sack->highestConseqTSN) + EXTRACT_16BITS(&frag->fragmentStart),
EXTRACT_32BITS(&sack->highestConseqTSN) + EXTRACT_16BITS(&frag->fragmentEnd));
/* print duplicate TSNs */
for (dupTSN = (const u_char *)frag, tsnNo=0;
(const void *) dupTSN < nextChunk && tsnNo<EXTRACT_16BITS(&sack->numDupTsns);
dupTSN += 4, tsnNo++)
printf("\n\t\t[dup TSN #%u: %u] ", tsnNo+1,
EXTRACT_32BITS(dupTSN));
break;
}
case SCTP_HEARTBEAT_REQUEST :
{
const struct sctpHBsender *hb;
hb=(const struct sctpHBsender*)chunkDescPtr;
printf("[HB REQ] ");
break;
}
case SCTP_HEARTBEAT_ACK :
printf("[HB ACK] ");
break;
case SCTP_ABORT_ASSOCIATION :
printf("[ABORT] ");
break;
case SCTP_SHUTDOWN :
printf("[SHUTDOWN] ");
break;
case SCTP_SHUTDOWN_ACK :
printf("[SHUTDOWN ACK] ");
break;
case SCTP_OPERATION_ERR :
printf("[OP ERR] ");
break;
case SCTP_COOKIE_ECHO :
printf("[COOKIE ECHO] ");
break;
case SCTP_COOKIE_ACK :
printf("[COOKIE ACK] ");
break;
case SCTP_ECN_ECHO :
printf("[ECN ECHO] ");
break;
case SCTP_ECN_CWR :
printf("[ECN CWR] ");
break;
case SCTP_SHUTDOWN_COMPLETE :
printf("[SHUTDOWN COMPLETE] ");
break;
case SCTP_FORWARD_CUM_TSN :
printf("[FOR CUM TSN] ");
break;
case SCTP_RELIABLE_CNTL :
printf("[REL CTRL] ");
break;
case SCTP_RELIABLE_CNTL_ACK :
printf("[REL CTRL ACK] ");
break;
default :
printf("[Unknown chunk type: 0x%x]", chunkDescPtr->chunkID);
return;
}
if (vflag < 2)
sep = ", (";
}
return;
trunc:
printf("[|sctp]");
return;
}