freebsd-skq/sbin/fsck_ffs/dir.c

713 lines
18 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char sccsid[] = "@(#)dir.c 8.8 (Berkeley) 4/28/95";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/sysctl.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/dir.h>
#include <ufs/ffs/fs.h>
#include <err.h>
#include <string.h>
#include "fsck.h"
static struct dirtemplate emptydir = {
0, DIRBLKSIZ, DT_UNKNOWN, 0, "",
0, 0, DT_UNKNOWN, 0, ""
};
static struct dirtemplate dirhead = {
0, 12, DT_DIR, 1, ".",
0, DIRBLKSIZ - 12, DT_DIR, 2, ".."
};
static int chgino(struct inodesc *);
static int dircheck(struct inodesc *, struct direct *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int expanddir(union dinode *dp, char *name);
static void freedir(ino_t ino, ino_t parent);
static struct direct *fsck_readdir(struct inodesc *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static struct bufarea *getdirblk(ufs2_daddr_t blkno, long size);
static int lftempname(char *bufp, ino_t ino);
static int mkentry(struct inodesc *);
/*
* Propagate connected state through the tree.
*/
void
propagate(void)
{
struct inoinfo **inpp, *inp;
struct inoinfo **inpend;
long change;
inpend = &inpsort[inplast];
do {
change = 0;
for (inpp = inpsort; inpp < inpend; inpp++) {
inp = *inpp;
if (inp->i_parent == 0)
continue;
if (inoinfo(inp->i_parent)->ino_state == DFOUND &&
INO_IS_DUNFOUND(inp->i_number)) {
inoinfo(inp->i_number)->ino_state = DFOUND;
change++;
}
}
} while (change > 0);
}
/*
* Scan each entry in a directory block.
*/
int
dirscan(struct inodesc *idesc)
{
struct direct *dp;
struct bufarea *bp;
u_int dsize, n;
long blksiz;
char dbuf[DIRBLKSIZ];
if (idesc->id_type != DATA)
errx(EEXIT, "wrong type to dirscan %d", idesc->id_type);
if (idesc->id_entryno == 0 &&
(idesc->id_filesize & (DIRBLKSIZ - 1)) != 0)
idesc->id_filesize = roundup(idesc->id_filesize, DIRBLKSIZ);
blksiz = idesc->id_numfrags * sblock.fs_fsize;
if (chkrange(idesc->id_blkno, idesc->id_numfrags)) {
idesc->id_filesize -= blksiz;
return (SKIP);
}
idesc->id_loc = 0;
for (dp = fsck_readdir(idesc); dp != NULL; dp = fsck_readdir(idesc)) {
dsize = dp->d_reclen;
if (dsize > sizeof(dbuf))
dsize = sizeof(dbuf);
memmove(dbuf, dp, (size_t)dsize);
idesc->id_dirp = (struct direct *)dbuf;
if ((n = (*idesc->id_func)(idesc)) & ALTERED) {
bp = getdirblk(idesc->id_blkno, blksiz);
memmove(bp->b_un.b_buf + idesc->id_loc - dsize, dbuf,
(size_t)dsize);
dirty(bp);
sbdirty();
rerun = 1;
}
1995-05-30 06:12:45 +00:00
if (n & STOP)
return (n);
}
return (idesc->id_filesize > 0 ? KEEPON : STOP);
}
/*
* get next entry in a directory.
*/
static struct direct *
fsck_readdir(struct inodesc *idesc)
{
struct direct *dp, *ndp;
struct bufarea *bp;
long size, blksiz, fix, dploc;
blksiz = idesc->id_numfrags * sblock.fs_fsize;
bp = getdirblk(idesc->id_blkno, blksiz);
if (idesc->id_loc % DIRBLKSIZ == 0 && idesc->id_filesize > 0 &&
idesc->id_loc < blksiz) {
dp = (struct direct *)(bp->b_un.b_buf + idesc->id_loc);
if (dircheck(idesc, dp))
goto dpok;
if (idesc->id_fix == IGNORE)
return (0);
fix = dofix(idesc, "DIRECTORY CORRUPTED");
bp = getdirblk(idesc->id_blkno, blksiz);
dp = (struct direct *)(bp->b_un.b_buf + idesc->id_loc);
dp->d_reclen = DIRBLKSIZ;
dp->d_ino = 0;
dp->d_type = 0;
dp->d_namlen = 0;
dp->d_name[0] = '\0';
if (fix)
dirty(bp);
idesc->id_loc += DIRBLKSIZ;
idesc->id_filesize -= DIRBLKSIZ;
return (dp);
}
dpok:
if (idesc->id_filesize <= 0 || idesc->id_loc >= blksiz)
return NULL;
dploc = idesc->id_loc;
dp = (struct direct *)(bp->b_un.b_buf + dploc);
idesc->id_loc += dp->d_reclen;
idesc->id_filesize -= dp->d_reclen;
if ((idesc->id_loc % DIRBLKSIZ) == 0)
return (dp);
ndp = (struct direct *)(bp->b_un.b_buf + idesc->id_loc);
if (idesc->id_loc < blksiz && idesc->id_filesize > 0 &&
dircheck(idesc, ndp) == 0) {
size = DIRBLKSIZ - (idesc->id_loc % DIRBLKSIZ);
idesc->id_loc += size;
idesc->id_filesize -= size;
if (idesc->id_fix == IGNORE)
return (0);
fix = dofix(idesc, "DIRECTORY CORRUPTED");
bp = getdirblk(idesc->id_blkno, blksiz);
dp = (struct direct *)(bp->b_un.b_buf + dploc);
dp->d_reclen += size;
if (fix)
dirty(bp);
}
return (dp);
}
/*
* Verify that a directory entry is valid.
* This is a superset of the checks made in the kernel.
*/
static int
dircheck(struct inodesc *idesc, struct direct *dp)
{
size_t size;
char *cp;
u_char type;
u_int8_t namlen;
int spaceleft;
spaceleft = DIRBLKSIZ - (idesc->id_loc % DIRBLKSIZ);
if (dp->d_reclen == 0 ||
dp->d_reclen > spaceleft ||
(dp->d_reclen & 0x3) != 0)
goto bad;
if (dp->d_ino == 0)
return (1);
size = DIRSIZ(0, dp);
namlen = dp->d_namlen;
type = dp->d_type;
if (dp->d_reclen < size ||
idesc->id_filesize < size ||
namlen == 0 ||
type > 15)
goto bad;
for (cp = dp->d_name, size = 0; size < namlen; size++)
if (*cp == '\0' || (*cp++ == '/'))
goto bad;
if (*cp != '\0')
goto bad;
return (1);
bad:
if (debug)
printf("Bad dir: ino %d reclen %d namlen %d type %d name %s\n",
dp->d_ino, dp->d_reclen, dp->d_namlen, dp->d_type,
dp->d_name);
return (0);
}
void
direrror(ino_t ino, const char *errmesg)
{
fileerror(ino, ino, errmesg);
}
void
fileerror(ino_t cwd, ino_t ino, const char *errmesg)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
char pathbuf[MAXPATHLEN + 1];
pwarn("%s ", errmesg);
pinode(ino);
printf("\n");
getpathname(pathbuf, cwd, ino);
if (ino < UFS_ROOTINO || ino > maxino) {
pfatal("NAME=%s\n", pathbuf);
return;
}
dp = ginode(ino);
if (ftypeok(dp))
pfatal("%s=%s\n",
2018-03-17 12:59:55 +00:00
(DIP(dp, di_mode) & IFMT) == IFDIR ? "DIR" : "FILE",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
pathbuf);
else
pfatal("NAME=%s\n", pathbuf);
}
void
adjust(struct inodesc *idesc, int lcnt)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
int saveresolved;
dp = ginode(idesc->id_number);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_nlink) == lcnt) {
/*
* If we have not hit any unresolved problems, are running
* in preen mode, and are on a file system using soft updates,
* then just toss any partially allocated files.
*/
if (resolved && (preen || bkgrdflag) && usedsoftdep) {
clri(idesc, "UNREF", 1);
return;
} else {
/*
* The file system can be marked clean even if
* a file is not linked up, but is cleared.
* Hence, resolved should not be cleared when
* linkup is answered no, but clri is answered yes.
*/
saveresolved = resolved;
if (linkup(idesc->id_number, (ino_t)0, NULL) == 0) {
resolved = saveresolved;
clri(idesc, "UNREF", 0);
return;
}
/*
* Account for the new reference created by linkup().
*/
dp = ginode(idesc->id_number);
lcnt--;
}
}
if (lcnt != 0) {
pwarn("LINK COUNT %s", (lfdir == idesc->id_number) ? lfname :
2018-03-17 12:59:55 +00:00
((DIP(dp, di_mode) & IFMT) == IFDIR ? "DIR" : "FILE"));
pinode(idesc->id_number);
printf(" COUNT %d SHOULD BE %d",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
DIP(dp, di_nlink), DIP(dp, di_nlink) - lcnt);
if (preen || usedsoftdep) {
if (lcnt < 0) {
printf("\n");
pfatal("LINK COUNT INCREASING");
}
if (preen)
printf(" (ADJUSTED)\n");
}
if (preen || reply("ADJUST") == 1) {
if (bkgrdflag == 0) {
DIP_SET(dp, di_nlink, DIP(dp, di_nlink) - lcnt);
inodirty();
} else {
cmd.value = idesc->id_number;
cmd.size = -lcnt;
if (debug)
printf("adjrefcnt ino %ld amt %lld\n",
(long)cmd.value,
(long long)cmd.size);
if (sysctl(adjrefcnt, MIBSIZE, 0, 0,
&cmd, sizeof cmd) == -1)
rwerror("ADJUST INODE", cmd.value);
}
}
}
}
static int
mkentry(struct inodesc *idesc)
{
struct direct *dirp = idesc->id_dirp;
struct direct newent;
int newlen, oldlen;
newent.d_namlen = strlen(idesc->id_name);
newlen = DIRSIZ(0, &newent);
if (dirp->d_ino != 0)
oldlen = DIRSIZ(0, dirp);
else
oldlen = 0;
if (dirp->d_reclen - oldlen < newlen)
return (KEEPON);
newent.d_reclen = dirp->d_reclen - oldlen;
dirp->d_reclen = oldlen;
dirp = (struct direct *)(((char *)dirp) + oldlen);
dirp->d_ino = idesc->id_parent; /* ino to be entered is in id_parent */
dirp->d_reclen = newent.d_reclen;
dirp->d_type = inoinfo(idesc->id_parent)->ino_type;
dirp->d_namlen = newent.d_namlen;
memmove(dirp->d_name, idesc->id_name, (size_t)newent.d_namlen + 1);
return (ALTERED|STOP);
}
static int
chgino(struct inodesc *idesc)
{
struct direct *dirp = idesc->id_dirp;
if (memcmp(dirp->d_name, idesc->id_name, (int)dirp->d_namlen + 1))
return (KEEPON);
dirp->d_ino = idesc->id_parent;
dirp->d_type = inoinfo(idesc->id_parent)->ino_type;
return (ALTERED|STOP);
}
int
linkup(ino_t orphan, ino_t parentdir, char *name)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
int lostdir;
ino_t oldlfdir;
struct inodesc idesc;
char tempname[BUFSIZ];
memset(&idesc, 0, sizeof(struct inodesc));
dp = ginode(orphan);
2018-03-17 12:59:55 +00:00
lostdir = (DIP(dp, di_mode) & IFMT) == IFDIR;
pwarn("UNREF %s ", lostdir ? "DIR" : "FILE");
pinode(orphan);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (preen && DIP(dp, di_size) == 0)
return (0);
if (cursnapshot != 0) {
pfatal("FILE LINKUP IN SNAPSHOT");
return (0);
}
if (preen)
printf(" (RECONNECTED)\n");
else
if (reply("RECONNECT") == 0)
return (0);
if (lfdir == 0) {
dp = ginode(UFS_ROOTINO);
idesc.id_name = strdup(lfname);
idesc.id_type = DATA;
idesc.id_func = findino;
idesc.id_number = UFS_ROOTINO;
if ((ckinode(dp, &idesc) & FOUND) != 0) {
lfdir = idesc.id_parent;
} else {
pwarn("NO lost+found DIRECTORY");
if (preen || reply("CREATE")) {
lfdir = allocdir(UFS_ROOTINO, (ino_t)0, lfmode);
if (lfdir != 0) {
if (makeentry(UFS_ROOTINO, lfdir,
lfname) != 0) {
numdirs++;
if (preen)
printf(" (CREATED)\n");
} else {
freedir(lfdir, UFS_ROOTINO);
lfdir = 0;
if (preen)
printf("\n");
}
}
}
}
if (lfdir == 0) {
pfatal("SORRY. CANNOT CREATE lost+found DIRECTORY");
printf("\n\n");
return (0);
}
}
dp = ginode(lfdir);
2018-03-17 12:59:55 +00:00
if ((DIP(dp, di_mode) & IFMT) != IFDIR) {
pfatal("lost+found IS NOT A DIRECTORY");
if (reply("REALLOCATE") == 0)
return (0);
oldlfdir = lfdir;
if ((lfdir = allocdir(UFS_ROOTINO, (ino_t)0, lfmode)) == 0) {
pfatal("SORRY. CANNOT CREATE lost+found DIRECTORY\n\n");
return (0);
}
if ((changeino(UFS_ROOTINO, lfname, lfdir) & ALTERED) == 0) {
pfatal("SORRY. CANNOT CREATE lost+found DIRECTORY\n\n");
return (0);
}
inodirty();
idesc.id_type = ADDR;
idesc.id_func = pass4check;
idesc.id_number = oldlfdir;
adjust(&idesc, inoinfo(oldlfdir)->ino_linkcnt + 1);
inoinfo(oldlfdir)->ino_linkcnt = 0;
dp = ginode(lfdir);
}
if (inoinfo(lfdir)->ino_state != DFOUND) {
pfatal("SORRY. NO lost+found DIRECTORY\n\n");
return (0);
}
(void)lftempname(tempname, orphan);
if (makeentry(lfdir, orphan, (name ? name : tempname)) == 0) {
pfatal("SORRY. NO SPACE IN lost+found DIRECTORY");
printf("\n\n");
return (0);
}
inoinfo(orphan)->ino_linkcnt--;
if (lostdir) {
if ((changeino(orphan, "..", lfdir) & ALTERED) == 0 &&
parentdir != (ino_t)-1)
(void)makeentry(orphan, lfdir, "..");
dp = ginode(lfdir);
DIP_SET(dp, di_nlink, DIP(dp, di_nlink) + 1);
inodirty();
inoinfo(lfdir)->ino_linkcnt++;
pwarn("DIR I=%lu CONNECTED. ", (u_long)orphan);
if (parentdir != (ino_t)-1) {
1998-06-28 19:23:03 +00:00
printf("PARENT WAS I=%lu\n", (u_long)parentdir);
/*
* The parent directory, because of the ordering
* guarantees, has had the link count incremented
* for the child, but no entry was made. This
* fixes the parent link count so that fsck does
* not need to be rerun.
*/
inoinfo(parentdir)->ino_linkcnt++;
}
if (preen == 0)
printf("\n");
}
return (1);
}
/*
* fix an entry in a directory.
*/
int
changeino(ino_t dir, const char *name, ino_t newnum)
{
struct inodesc idesc;
memset(&idesc, 0, sizeof(struct inodesc));
idesc.id_type = DATA;
idesc.id_func = chgino;
idesc.id_number = dir;
idesc.id_fix = DONTKNOW;
idesc.id_name = strdup(name);
idesc.id_parent = newnum; /* new value for name */
return (ckinode(ginode(dir), &idesc));
}
/*
* make an entry in a directory
*/
int
makeentry(ino_t parent, ino_t ino, const char *name)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
struct inodesc idesc;
char pathbuf[MAXPATHLEN + 1];
1995-05-30 06:12:45 +00:00
if (parent < UFS_ROOTINO || parent >= maxino ||
ino < UFS_ROOTINO || ino >= maxino)
return (0);
memset(&idesc, 0, sizeof(struct inodesc));
idesc.id_type = DATA;
idesc.id_func = mkentry;
idesc.id_number = parent;
idesc.id_parent = ino; /* this is the inode to enter */
idesc.id_fix = DONTKNOW;
idesc.id_name = strdup(name);
dp = ginode(parent);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (DIP(dp, di_size) % DIRBLKSIZ) {
DIP_SET(dp, di_size, roundup(DIP(dp, di_size), DIRBLKSIZ));
inodirty();
}
if ((ckinode(dp, &idesc) & ALTERED) != 0)
return (1);
getpathname(pathbuf, parent, parent);
dp = ginode(parent);
if (expanddir(dp, pathbuf) == 0)
return (0);
return (ckinode(dp, &idesc) & ALTERED);
}
/*
* Attempt to expand the size of a directory
*/
static int
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
expanddir(union dinode *dp, char *name)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t lastbn, newblk;
struct bufarea *bp;
char *cp, firstblk[DIRBLKSIZ];
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
lastbn = lblkno(&sblock, DIP(dp, di_size));
if (lastbn >= UFS_NDADDR - 1 || DIP(dp, di_db[lastbn]) == 0 ||
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
DIP(dp, di_size) == 0)
return (0);
if ((newblk = allocblk(sblock.fs_frag)) == 0)
return (0);
DIP_SET(dp, di_db[lastbn + 1], DIP(dp, di_db[lastbn]));
DIP_SET(dp, di_db[lastbn], newblk);
DIP_SET(dp, di_size, DIP(dp, di_size) + sblock.fs_bsize);
DIP_SET(dp, di_blocks, DIP(dp, di_blocks) + btodb(sblock.fs_bsize));
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bp = getdirblk(DIP(dp, di_db[lastbn + 1]),
sblksize(&sblock, DIP(dp, di_size), lastbn + 1));
if (bp->b_errs)
goto bad;
memmove(firstblk, bp->b_un.b_buf, DIRBLKSIZ);
bp = getdirblk(newblk, sblock.fs_bsize);
if (bp->b_errs)
goto bad;
memmove(bp->b_un.b_buf, firstblk, DIRBLKSIZ);
for (cp = &bp->b_un.b_buf[DIRBLKSIZ];
cp < &bp->b_un.b_buf[sblock.fs_bsize];
cp += DIRBLKSIZ)
memmove(cp, &emptydir, sizeof emptydir);
dirty(bp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bp = getdirblk(DIP(dp, di_db[lastbn + 1]),
sblksize(&sblock, DIP(dp, di_size), lastbn + 1));
if (bp->b_errs)
goto bad;
memmove(bp->b_un.b_buf, &emptydir, sizeof emptydir);
pwarn("NO SPACE LEFT IN %s", name);
if (preen)
printf(" (EXPANDED)\n");
else if (reply("EXPAND") == 0)
goto bad;
dirty(bp);
inodirty();
return (1);
bad:
DIP_SET(dp, di_db[lastbn], DIP(dp, di_db[lastbn + 1]));
DIP_SET(dp, di_db[lastbn + 1], 0);
DIP_SET(dp, di_size, DIP(dp, di_size) - sblock.fs_bsize);
DIP_SET(dp, di_blocks, DIP(dp, di_blocks) - btodb(sblock.fs_bsize));
freeblk(newblk, sblock.fs_frag);
return (0);
}
/*
* allocate a new directory
*/
ino_t
allocdir(ino_t parent, ino_t request, int mode)
{
ino_t ino;
char *cp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
struct bufarea *bp;
struct inoinfo *inp;
struct dirtemplate *dirp;
2018-03-17 12:59:55 +00:00
ino = allocino(request, IFDIR|mode);
dirp = &dirhead;
dirp->dot_ino = ino;
dirp->dotdot_ino = parent;
dp = ginode(ino);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bp = getdirblk(DIP(dp, di_db[0]), sblock.fs_fsize);
if (bp->b_errs) {
freeino(ino);
return (0);
}
memmove(bp->b_un.b_buf, dirp, sizeof(struct dirtemplate));
for (cp = &bp->b_un.b_buf[DIRBLKSIZ];
cp < &bp->b_un.b_buf[sblock.fs_fsize];
cp += DIRBLKSIZ)
memmove(cp, &emptydir, sizeof emptydir);
dirty(bp);
DIP_SET(dp, di_nlink, 2);
inodirty();
if (ino == UFS_ROOTINO) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inoinfo(ino)->ino_linkcnt = DIP(dp, di_nlink);
cacheino(dp, ino);
return(ino);
}
if (!INO_IS_DVALID(parent)) {
freeino(ino);
return (0);
}
cacheino(dp, ino);
inp = getinoinfo(ino);
inp->i_parent = parent;
inp->i_dotdot = parent;
inoinfo(ino)->ino_state = inoinfo(parent)->ino_state;
if (inoinfo(ino)->ino_state == DSTATE) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inoinfo(ino)->ino_linkcnt = DIP(dp, di_nlink);
inoinfo(parent)->ino_linkcnt++;
}
dp = ginode(parent);
DIP_SET(dp, di_nlink, DIP(dp, di_nlink) + 1);
inodirty();
return (ino);
}
/*
* free a directory inode
*/
static void
freedir(ino_t ino, ino_t parent)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
if (ino != parent) {
dp = ginode(parent);
DIP_SET(dp, di_nlink, DIP(dp, di_nlink) - 1);
inodirty();
}
freeino(ino);
}
/*
* generate a temporary name for the lost+found directory.
*/
static int
lftempname(char *bufp, ino_t ino)
{
ino_t in;
char *cp;
int namlen;
cp = bufp + 2;
for (in = maxino; in > 0; in /= 10)
cp++;
*--cp = 0;
namlen = cp - bufp;
in = ino;
while (cp > bufp) {
*--cp = (in % 10) + '0';
in /= 10;
}
*cp = '#';
return (namlen);
}
/*
* Get a directory block.
* Insure that it is held until another is requested.
*/
static struct bufarea *
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
getdirblk(ufs2_daddr_t blkno, long size)
{
if (pdirbp != NULL)
pdirbp->b_flags &= ~B_INUSE;
pdirbp = getdatablk(blkno, size, BT_DIRDATA);
return (pdirbp);
}