d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4349c6ba29
freebsd-skq/sys/netinet/sctp_var.h

478 lines
16 KiB
C
Raw Normal View History

Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*-
* Copyright (c) 2001-2006, Cisco Systems, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $KAME: sctp_var.h,v 1.24 2005/03/06 16:04:19 itojun Exp $ */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifndef _NETINET_SCTP_VAR_H_
#define _NETINET_SCTP_VAR_H_
#include <sys/socketvar.h>
#include <netinet/sctp_uio.h>
/* SCTP Kernel structures */
/*
* Names for SCTP sysctl objects
*/
#define SCTPCTL_MAXDGRAM 1 /* max datagram size */
#define SCTPCTL_RECVSPACE 2 /* default receive buffer space */
#define SCTPCTL_AUTOASCONF 3 /* auto asconf enable/disable flag */
#define SCTPCTL_ECN_ENABLE 4 /* Is ecn allowed */
#define SCTPCTL_ECN_NONCE 5 /* Is ecn nonce allowed */
#define SCTPCTL_STRICT_SACK 6 /* strictly require sack'd TSN's to be
* smaller than sndnxt. */
#define SCTPCTL_NOCSUM_LO 7 /* Require that the Loopback NOT have
* the crc32 checksum on packets
* routed over it. */
#define SCTPCTL_STRICT_INIT 8
#define SCTPCTL_PEER_CHK_OH 9
#define SCTPCTL_MAXBURST 10
#define SCTPCTL_MAXCHUNKONQ 11
#define SCTPCTL_DELAYED_SACK 12
#define SCTPCTL_HB_INTERVAL 13
#define SCTPCTL_PMTU_RAISE 14
#define SCTPCTL_SHUTDOWN_GUARD 15
#define SCTPCTL_SECRET_LIFETIME 16
#define SCTPCTL_RTO_MAX 17
#define SCTPCTL_RTO_MIN 18
#define SCTPCTL_RTO_INITIAL 19
#define SCTPCTL_INIT_RTO_MAX 20
#define SCTPCTL_COOKIE_LIFE 21
#define SCTPCTL_INIT_RTX_MAX 22
#define SCTPCTL_ASSOC_RTX_MAX 23
#define SCTPCTL_PATH_RTX_MAX 24
#define SCTPCTL_NR_OUTGOING_STREAMS 25
#define SCTPCTL_CMT_ON_OFF 26
#define SCTPCTL_CWND_MAXBURST 27
#define SCTPCTL_EARLY_FR 28
#define SCTPCTL_RTTVAR_CC 29
#define SCTPCTL_DEADLOCK_DET 30
#define SCTPCTL_EARLY_FR_MSEC 31
#define SCTPCTL_ASCONF_AUTH_NOCHK 32
#define SCTPCTL_AUTH_DISABLE 33
#define SCTPCTL_AUTH_RANDOM_LEN 34
#define SCTPCTL_AUTH_HMAC_ID 35
#define SCTPCTL_ABC_L_VAR 36
#define SCTPCTL_MAX_MBUF_CHAIN 37
#define SCTPCTL_CMT_USE_DAC 38
#define SCTPCTL_DO_DRAIN 39
#define SCTPCTL_WARM_CRC32 40
#define SCTPCTL_QLIMIT_ABORT 41
#define SCTPCTL_STRICT_ORDER 42
#define SCTPCTL_TCBHASHSIZE 43
#define SCTPCTL_PCBHASHSIZE 44
#define SCTPCTL_CHUNKSCALE 45
#define SCTPCTL_MINSPLIT 46
#define SCTPCTL_ADD_MORE 47
#define SCTPCTL_SYS_RESC 48
#define SCTPCTL_ASOC_RESC 49
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
#define SCTPCTL_NAT_FRIENDLY 50
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_DEBUG
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
#define SCTPCTL_DEBUG 51
#define SCTPCTL_MAXID 51
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#else
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
#define SCTPCTL_MAXID 50
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#endif
#ifdef SCTP_DEBUG
#define SCTPCTL_NAMES { \
{ 0, 0 }, \
{ "sendspace", CTLTYPE_INT }, \
{ "recvspace", CTLTYPE_INT }, \
{ "autoasconf", CTLTYPE_INT }, \
{ "ecn_enable", CTLTYPE_INT }, \
{ "ecn_nonce", CTLTYPE_INT }, \
{ "strict_sack", CTLTYPE_INT }, \
{ "looback_nocsum", CTLTYPE_INT }, \
{ "strict_init", CTLTYPE_INT }, \
{ "peer_chkoh", CTLTYPE_INT }, \
{ "maxburst", CTLTYPE_INT }, \
{ "maxchunks", CTLTYPE_INT }, \
{ "delayed_sack_time", CTLTYPE_INT }, \
{ "heartbeat_interval", CTLTYPE_INT }, \
{ "pmtu_raise_time", CTLTYPE_INT }, \
{ "shutdown_guard_time", CTLTYPE_INT }, \
{ "secret_lifetime", CTLTYPE_INT }, \
{ "rto_max", CTLTYPE_INT }, \
{ "rto_min", CTLTYPE_INT }, \
{ "rto_initial", CTLTYPE_INT }, \
{ "init_rto_max", CTLTYPE_INT }, \
{ "valid_cookie_life", CTLTYPE_INT }, \
{ "init_rtx_max", CTLTYPE_INT }, \
{ "assoc_rtx_max", CTLTYPE_INT }, \
{ "path_rtx_max", CTLTYPE_INT }, \
{ "nr_outgoing_streams", CTLTYPE_INT }, \
{ "cmt_on_off", CTLTYPE_INT }, \
{ "cwnd_maxburst", CTLTYPE_INT }, \
{ "early_fast_retran", CTLTYPE_INT }, \
{ "use_rttvar_congctrl", CTLTYPE_INT }, \
{ "deadlock_detect", CTLTYPE_INT }, \
{ "early_fast_retran_msec", CTLTYPE_INT }, \
{ "asconf_auth_nochk", CTLTYPE_INT }, \
{ "auth_disable", CTLTYPE_INT }, \
{ "auth_random_len", CTLTYPE_INT }, \
{ "auth_hmac_id", CTLTYPE_INT }, \
{ "abc_l_var", CTLTYPE_INT }, \
{ "max_mbuf_chain", CTLTYPE_INT }, \
{ "cmt_use_dac", CTLTYPE_INT }, \
{ "do_sctp_drain", CTLTYPE_INT }, \
{ "warm_crc_table", CTLTYPE_INT }, \
{ "abort_at_limit", CTLTYPE_INT }, \
{ "strict_data_order", CTLTYPE_INT }, \
{ "tcbhashsize", CTLTYPE_INT }, \
{ "pcbhashsize", CTLTYPE_INT }, \
{ "chunkscale", CTLTYPE_INT }, \
{ "min_split_point", CTLTYPE_INT }, \
{ "add_more_on_output", CTLTYPE_INT }, \
{ "sys_resource", CTLTYPE_INT }, \
{ "asoc_resource", CTLTYPE_INT }, \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
{ "nat_friendly", CTLTYPE_INT }, \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{ "debug", CTLTYPE_INT }, \
}
#else
#define SCTPCTL_NAMES { \
{ 0, 0 }, \
{ "sendspace", CTLTYPE_INT }, \
{ "recvspace", CTLTYPE_INT }, \
{ "autoasconf", CTLTYPE_INT }, \
{ "ecn_enable", CTLTYPE_INT }, \
{ "ecn_nonce", CTLTYPE_INT }, \
{ "strict_sack", CTLTYPE_INT }, \
{ "looback_nocsum", CTLTYPE_INT }, \
{ "strict_init", CTLTYPE_INT }, \
{ "peer_chkoh", CTLTYPE_INT }, \
{ "maxburst", CTLTYPE_INT }, \
{ "maxchunks", CTLTYPE_INT }, \
{ "delayed_sack_time", CTLTYPE_INT }, \
{ "heartbeat_interval", CTLTYPE_INT }, \
{ "pmtu_raise_time", CTLTYPE_INT }, \
{ "shutdown_guard_time", CTLTYPE_INT }, \
{ "secret_lifetime", CTLTYPE_INT }, \
{ "rto_max", CTLTYPE_INT }, \
{ "rto_min", CTLTYPE_INT }, \
{ "rto_initial", CTLTYPE_INT }, \
{ "init_rto_max", CTLTYPE_INT }, \
{ "valid_cookie_life", CTLTYPE_INT }, \
{ "init_rtx_max", CTLTYPE_INT }, \
{ "assoc_rtx_max", CTLTYPE_INT }, \
{ "path_rtx_max", CTLTYPE_INT }, \
{ "nr_outgoing_streams", CTLTYPE_INT }, \
{ "cmt_on_off", CTLTYPE_INT }, \
{ "cwnd_maxburst", CTLTYPE_INT }, \
{ "early_fast_retran", CTLTYPE_INT }, \
{ "use_rttvar_congctrl", CTLTYPE_INT }, \
{ "deadlock_detect", CTLTYPE_INT }, \
{ "early_fast_retran_msec", CTLTYPE_INT }, \
{ "asconf_auth_nochk", CTLTYPE_INT }, \
{ "auth_disable", CTLTYPE_INT }, \
{ "auth_random_len", CTLTYPE_INT }, \
{ "auth_hmac_id", CTLTYPE_INT }, \
{ "abc_l_var", CTLTYPE_INT }, \
{ "max_mbuf_chain", CTLTYPE_INT }, \
{ "cmt_use_dac", CTLTYPE_INT }, \
{ "do_sctp_drain", CTLTYPE_INT }, \
{ "warm_crc_table", CTLTYPE_INT }, \
{ "abort_at_limit", CTLTYPE_INT }, \
{ "strict_data_order", CTLTYPE_INT }, \
{ "tcbhashsize", CTLTYPE_INT }, \
{ "pcbhashsize", CTLTYPE_INT }, \
{ "chunkscale", CTLTYPE_INT }, \
{ "min_split_point", CTLTYPE_INT }, \
{ "add_more_on_output", CTLTYPE_INT }, \
{ "sys_resource", CTLTYPE_INT }, \
{ "asoc_resource", CTLTYPE_INT }, \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
{ "nat_friendly", CTLTYPE_INT }, \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
#endif
#if defined(_KERNEL)
#ifdef SYSCTL_DECL
SYSCTL_DECL(_net_inet_sctp);
#endif
extern struct pr_usrreqs sctp_usrreqs;
#define sctp_feature_on(inp, feature) (inp->sctp_features |= feature)
#define sctp_feature_off(inp, feature) (inp->sctp_features &= ~feature)
#define sctp_is_feature_on(inp, feature) (inp->sctp_features & feature)
#define sctp_is_feature_off(inp, feature) ((inp->sctp_features & feature) == 0)
#define sctp_sbspace(asoc, sb) ((long) (((sb)->sb_hiwat > (asoc)->sb_cc) ? ((sb)->sb_hiwat - (asoc)->sb_cc) : 0))
#define sctp_sbspace_failedmsgs(sb) ((long) (((sb)->sb_hiwat > (sb)->sb_cc) ? ((sb)->sb_hiwat - (sb)->sb_cc) : 0))
#define sctp_sbspace_sub(a,b) ((a > b) ? (a - b) : 0)
extern uint32_t sctp_asoc_free_resc_limit;
extern uint32_t sctp_system_free_resc_limit;
/* I tried to cache the readq entries at one
* point. But the reality is that it did not
* add any performance since this meant
* we had to lock the STCB on read. And at that point
* once you have to do an extra lock, it really does
* not matter if the lock is in the ZONE stuff or
* in our code. Note that this same problem would
* occur with an mbuf cache as well so it is
* not really worth doing, at least right now :-D
*/
#define sctp_free_a_readq(_stcb, _readq) { \
SCTP_ZONE_FREE(sctppcbinfo.ipi_zone_readq, (_readq)); \
SCTP_DECR_READQ_COUNT(); \
}
#define sctp_alloc_a_readq(_stcb, _readq) { \
(_readq) = (struct sctp_queued_to_read *)SCTP_ZONE_GET(sctppcbinfo.ipi_zone_readq); \
if ((_readq)) { \
SCTP_INCR_READQ_COUNT(); \
} \
}
#define sctp_free_a_strmoq(_stcb, _strmoq) { \
if (((_stcb)->asoc.free_strmoq_cnt > sctp_asoc_free_resc_limit) || \
(sctppcbinfo.ipi_free_strmoq > sctp_system_free_resc_limit)) { \
SCTP_ZONE_FREE(sctppcbinfo.ipi_zone_strmoq, (_strmoq)); \
SCTP_DECR_STRMOQ_COUNT(); \
} else { \
TAILQ_INSERT_TAIL(&(_stcb)->asoc.free_strmoq, (_strmoq), next); \
(_stcb)->asoc.free_strmoq_cnt++; \
atomic_add_int(&sctppcbinfo.ipi_free_strmoq, 1); \
} \
}
#define sctp_alloc_a_strmoq(_stcb, _strmoq) { \
if(TAILQ_EMPTY(&(_stcb)->asoc.free_strmoq)) { \
(_strmoq) = (struct sctp_stream_queue_pending *)SCTP_ZONE_GET(sctppcbinfo.ipi_zone_strmoq); \
if ((_strmoq)) { \
SCTP_INCR_STRMOQ_COUNT(); \
} \
} else { \
(_strmoq) = TAILQ_FIRST(&(_stcb)->asoc.free_strmoq); \
TAILQ_REMOVE(&(_stcb)->asoc.free_strmoq, (_strmoq), next); \
atomic_subtract_int(&sctppcbinfo.ipi_free_strmoq, 1); \
(_stcb)->asoc.free_strmoq_cnt--; \
} \
}
#define sctp_free_a_chunk(_stcb, _chk) { \
if (((_stcb)->asoc.free_chunk_cnt > sctp_asoc_free_resc_limit) || \
(sctppcbinfo.ipi_free_chunks > sctp_system_free_resc_limit)) { \
SCTP_ZONE_FREE(sctppcbinfo.ipi_zone_chunk, (_chk)); \
SCTP_DECR_CHK_COUNT(); \
} else { \
TAILQ_INSERT_TAIL(&(_stcb)->asoc.free_chunks, (_chk), sctp_next); \
(_stcb)->asoc.free_chunk_cnt++; \
atomic_add_int(&sctppcbinfo.ipi_free_chunks, 1); \
} \
}
#define sctp_alloc_a_chunk(_stcb, _chk) { \
if(TAILQ_EMPTY(&(_stcb)->asoc.free_chunks)) { \
(_chk) = (struct sctp_tmit_chunk *)SCTP_ZONE_GET(sctppcbinfo.ipi_zone_chunk); \
if ((_chk)) { \
SCTP_INCR_CHK_COUNT(); \
} \
} else { \
(_chk) = TAILQ_FIRST(&(_stcb)->asoc.free_chunks); \
TAILQ_REMOVE(&(_stcb)->asoc.free_chunks, (_chk), sctp_next); \
atomic_subtract_int(&sctppcbinfo.ipi_free_chunks, 1); \
(_stcb)->asoc.free_chunk_cnt--; \
} \
}
#define sctp_free_remote_addr(__net) { \
if ((__net)) { \
if (atomic_fetchadd_int(&(__net)->ref_count, -1) == 1) { \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_OS_TIMER_STOP(&(__net)->rxt_timer.timer); \
SCTP_OS_TIMER_STOP(&(__net)->pmtu_timer.timer); \
SCTP_OS_TIMER_STOP(&(__net)->fr_timer.timer); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
(__net)->dest_state = SCTP_ADDR_NOT_REACHABLE; \
SCTP_ZONE_FREE(sctppcbinfo.ipi_zone_net, (__net)); \
SCTP_DECR_RADDR_COUNT(); \
} \
} \
}
#define sctp_sbfree(ctl, stcb, sb, m) { \
uint32_t val; \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
val = atomic_fetchadd_int(&(sb)->sb_cc,-(SCTP_BUF_LEN((m)))); \
if(val < SCTP_BUF_LEN((m))) { \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
panic("sb_cc goes negative"); \
} \
val = atomic_fetchadd_int(&(sb)->sb_mbcnt,-(MSIZE)); \
if(val < MSIZE) { \
panic("sb_mbcnt goes negative"); \
} \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_IS_EXTENDED(m)) { \
val = atomic_fetchadd_int(&(sb)->sb_mbcnt,-(SCTP_BUF_EXTEND_SIZE(m))); \
if(val < SCTP_BUF_EXTEND_SIZE(m)) { \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
panic("sb_mbcnt goes negative2"); \
} \
} \
if (((ctl)->do_not_ref_stcb == 0) && stcb) {\
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
val = atomic_fetchadd_int(&(stcb)->asoc.sb_cc,-(SCTP_BUF_LEN((m)))); \
if(val < SCTP_BUF_LEN((m))) {\
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
panic("stcb->sb_cc goes negative"); \
} \
val = atomic_fetchadd_int(&(stcb)->asoc.sb_mbcnt,-(MSIZE)); \
if(val < MSIZE) { \
panic("asoc->mbcnt goes negative"); \
} \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_IS_EXTENDED(m)) { \
val = atomic_fetchadd_int(&(stcb)->asoc.sb_mbcnt,-(SCTP_BUF_EXTEND_SIZE(m))); \
if(val < SCTP_BUF_EXTEND_SIZE(m)) { \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
panic("assoc stcb->mbcnt would go negative"); \
} \
} \
} \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_TYPE(m) != MT_DATA && SCTP_BUF_TYPE(m) != MT_HEADER && \
SCTP_BUF_TYPE(m) != MT_OOBDATA) \
atomic_subtract_int(&(sb)->sb_ctl,SCTP_BUF_LEN((m))); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
#define sctp_sballoc(stcb, sb, m) { \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
atomic_add_int(&(sb)->sb_cc,SCTP_BUF_LEN((m))); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
atomic_add_int(&(sb)->sb_mbcnt, MSIZE); \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_IS_EXTENDED(m)) \
atomic_add_int(&(sb)->sb_mbcnt,SCTP_BUF_EXTEND_SIZE(m)); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if(stcb) { \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
atomic_add_int(&(stcb)->asoc.sb_cc,SCTP_BUF_LEN((m))); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
atomic_add_int(&(stcb)->asoc.sb_mbcnt, MSIZE); \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_IS_EXTENDED(m)) \
atomic_add_int(&(stcb)->asoc.sb_mbcnt,SCTP_BUF_EXTEND_SIZE(m)); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_TYPE(m) != MT_DATA && SCTP_BUF_TYPE(m) != MT_HEADER && \
SCTP_BUF_TYPE(m) != MT_OOBDATA) \
atomic_add_int(&(sb)->sb_ctl,SCTP_BUF_LEN((m))); \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
#define sctp_ucount_incr(val) { \
val++; \
}
#define sctp_ucount_decr(val) { \
if (val > 0) { \
val--; \
} else { \
val = 0; \
} \
}
#define sctp_mbuf_crush(data) do { \
struct mbuf *_m; \
_m = (data); \
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
while(_m && (SCTP_BUF_LEN(_m) == 0)) { \
(data) = SCTP_BUF_NEXT(_m); \
SCTP_BUF_NEXT(_m) = NULL; \
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_m_free(_m); \
_m = (data); \
} \
} while (0)
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
/*
* some sysctls
*/
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
extern int sctp_sendspace;
extern int sctp_recvspace;
extern int sctp_ecn_enable;
extern int sctp_ecn_nonce;
extern int sctp_use_cwnd_based_maxburst;
extern unsigned int sctp_cmt_on_off;
extern unsigned int sctp_cmt_use_dac;
extern unsigned int sctp_cmt_sockopt_on_off;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
extern uint32_t sctp_nat_friendly;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_nets;
struct sctp_inpcb;
struct sctp_tcb;
struct sctphdr;
void sctp_ctlinput __P((int, struct sockaddr *, void *));
int sctp_ctloutput __P((struct socket *, struct sockopt *));
void sctp_input __P((struct mbuf *, int));
void sctp_drain __P((void));
void sctp_init __P((void));
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
void sctp_pcbinfo_cleanup(void);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int sctp_shutdown __P((struct socket *));
void sctp_notify
__P((struct sctp_inpcb *, int, struct sctphdr *,
struct sockaddr *, struct sctp_tcb *,
struct sctp_nets *));
#if defined(INET6)
void ip_2_ip6_hdr __P((struct ip6_hdr *, struct ip *));
#endif
int sctp_bindx(struct socket *, int, struct sockaddr_storage *,
int, int, struct proc *);
/* can't use sctp_assoc_t here */
int sctp_peeloff(struct socket *, struct socket *, int, caddr_t, int *);
sctp_assoc_t sctp_getassocid(struct sockaddr *);
int sctp_ingetaddr(struct socket *,
struct sockaddr **
);
int sctp_peeraddr(struct socket *,
struct sockaddr **
);
int sctp_listen(struct socket *, int, struct thread *);
int sctp_accept(struct socket *, struct sockaddr **);
#endif /* _KERNEL */
#endif /* !_NETINET_SCTP_VAR_H_ */
Reference in New Issue Copy Permalink