freebsd-skq/sys/i386/eisa/eisaconf.c

/*
 * EISA bus probe and attach routines 
 *
 * Copyright (c) 1995 Justin T. Gibbs.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice immediately at the beginning of the file, without modification,
 *    this list of conditions, and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Absolutely no warranty of function or purpose is made by the author
 *    Justin T. Gibbs.
 * 4. Modifications may be freely made to this file if the above conditions
 *    are met.
 *
 *	$Id: eisaconf.c,v 1.3 1995/11/05 04:42:49 gibbs Exp $
 */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/malloc.h>

#include "sys/types.h"
#include "i386/isa/icu.h"	 /* Hmmm.  Interrupt stuff? */
#include <sys/devconf.h>
#include "eisaconf.h"

struct eisa_device_node{
	struct eisa_device	 dev;
	struct eisa_device_node	*next;
};

extern struct kern_devconf kdc_cpu0;
extern int bootverbose;
 
struct kern_devconf kdc_eisa0 = {
	0, 0, 0,                /* filled in by dev_attach */ 
	"eisa", 0, { MDDT_BUS, 0 },
	0, 0, 0, BUS_EXTERNALLEN,
	&kdc_cpu0,              /* parent is the CPU */
	0,                      /* no parentdata */
	DC_BUSY,                /* busses are always busy */
	"EISA bus",        
	DC_CLS_BUS              /* class */
};

/* 
 * This should probably be a list of "struct device" once it exists.
 * A struct device will incorperate ioconf and driver entry point data
 * regardless of how its attached to the system (via unions) as well
 * as more generic information that all device types should support (unit
 * number, if its installed, etc).
 */
static struct eisa_device_node *eisa_dev_list;
static struct eisa_device_node **eisa_dev_list_tail = &eisa_dev_list;
static u_long eisa_unit;

static struct eisa_driver mainboard_drv = {
				     "eisa",
				     NULL,
				     NULL,
				     NULL,
				     &eisa_unit
				   };
/*
** probe for EISA devices
*/
void
eisa_configure()
{
    int i,slot;
    char *id_string;
    struct eisa_device_node *dev_node;
    struct eisa_driver **e_drvp = (struct eisa_driver**)eisadriver_set.ls_items;
    struct eisa_driver *e_drv;
    struct eisa_device *e_dev;
    int eisaBase = 0xC80;
    int first_slot = 0;
    eisa_id_t eisa_id;

    outb(eisaBase,0xFF);
    eisa_id = inb(eisaBase);
    if (eisa_id & 0x80) {
	/* 
	 * Not an EISA machine.  We still want to find boards like the
	 * Adaptec 284x that respond to EISA probes, so we "fake" the
	 * system board entry which the rest of the code uses as the 
	 * sentinal node in the eisa_dev_list.
	 */
	first_slot = 1;		/* Start at slot 1 just to be safe */
	eisaBase+=0x1000;
	dev_node = (struct eisa_device_node *)malloc(sizeof(*dev_node),
						     M_DEVBUF, M_NOWAIT);
	if (!dev_node) {
		printf("eisa0: cannot malloc eisa_device_node");
		return;	
	}
	bzero(dev_node, sizeof(*dev_node));
	e_dev = &(dev_node->dev);
	e_dev->ioconf.slot = 0; 
	*eisa_dev_list_tail = dev_node;
	eisa_dev_list_tail = &dev_node->next;
    }

    for (slot = first_slot; slot < EISA_SLOTS; eisaBase+=0x1000, slot++) {
	int id_size = sizeof(eisa_id);
	eisa_id = 0;
    	for( i = 0; i < id_size; i++ ) {
		outb(eisaBase,0xc80 + i); /* Some cards require priming */
		eisa_id |= inb(eisaBase + i) << ((id_size - i - 1) * CHAR_BIT);
	}
	if (eisa_id & 0x80000000)
	    continue;  /* no EISA card in slot */

	/* Prepare an eisa_device_node for this slot */
	dev_node = (struct eisa_device_node *)malloc(sizeof(*dev_node),
						     M_DEVBUF, M_NOWAIT);
	if (!dev_node) {
		printf("eisa0: cannot malloc eisa_device_node");
		break; /* Try to attach what we have already */
	}
	bzero(dev_node, sizeof(*dev_node));
	e_dev = &(dev_node->dev);
	e_dev->id = eisa_id;
	/*
	 * Add an EISA ID based descriptive name incase we don't
	 * have a driver for it.  We do this now instead of after all
	 * probes because in the future, the eisa module will only
	 * be responsible for creating the list of devices in the system
	 * for the configuration manager to use.
	 */
	e_dev->full_name = (char *)malloc(14*sizeof(char), M_DEVBUF, M_NOWAIT);
	if (!e_dev->full_name) {
	    panic("Eisa probe unable to malloc");
	}
	sprintf(e_dev->full_name, "%c%c%c%x rev %x",
		EISA_MFCTR_CHAR0(e_dev->id),
		EISA_MFCTR_CHAR1(e_dev->id),
		EISA_MFCTR_CHAR2(e_dev->id),
		EISA_PRODUCT_ID(e_dev->id),
		EISA_REVISION_ID(e_dev->id));
	e_dev->ioconf.slot = slot; 
	/* Is iobase defined in any EISA specs? */
	e_dev->ioconf.iobase = eisaBase & 0xff00;
	*eisa_dev_list_tail = dev_node;
	eisa_dev_list_tail = &dev_node->next;
    }

    dev_node = eisa_dev_list;

    /*
     * "Attach" the system board
     */

    /* The first entry had better be the motherboard */
    if (!dev_node || (dev_node->dev.ioconf.slot != 0))
	panic("EISA system board not in eisa_dev_list");

    e_dev = &dev_node->dev;
    e_dev->driver = &mainboard_drv;
    e_dev->unit = (*e_dev->driver->unit)++; 

    if (e_dev->full_name) { /* This is a real EISA system */
	id_string = e_dev->full_name;
	e_dev->full_name = (char *)malloc(strlen(e_dev->full_name)
					  + sizeof(" (System Board)")
					  + 1, M_DEVBUF, M_NOWAIT);
	if (!e_dev->full_name) {
	    panic("Eisa probe unable to malloc");
	}
	sprintf(e_dev->full_name, "%s (System Board)", id_string);
	free(id_string, M_DEVBUF);

	printf("%s%ld: <%s>\n",
	       e_dev->driver->name,
	       e_dev->unit,
	       e_dev->full_name);

	/* Should set the iosize, but I don't have a spec handy */

	dev_attach(&kdc_eisa0); /*
				 * Hmm. Do I need to do this attach always
				 * in case I attach a 284x in an otherwise
				 * non-EISA machine?
				 */
	printf("Probing for devices on the EISA bus\n");
    }

    if (!eisa_dev_list->next) {
	/*
	 * No devices.
	 * We may be able to remove the sentinal node in the non-EISA
	 * system case here depending on whether we had to do the
	 * dev_attach(&kdc_eisa0) up above.
	 */
	return;
    }
    /*
     * See what devices we recognize.
     */
    while((e_drv = *e_drvp++)) {
	(*e_drv->probe)();
    }

    /*
     * Attach the devices we found in slot order
     */
    for (dev_node = eisa_dev_list->next; dev_node; dev_node = dev_node->next) {
	e_dev = &dev_node->dev;
	e_drv = e_dev->driver;
	if (e_drv) {
	    /*
	     * Determine the proper unit number for this device.
	     * Here we should look in the device table generated
	     * by config to see if this type of device is enabled
	     * either generically or for this particular address
	     * as well as determine if a reserved unit number should
	     * be used.  We should also ensure that the "next availible
	     * unit number" skips over "wired" unit numbers. This will
	     * be done after config is fixed or some other configuration
	     * method is chosen.
	     */
	    e_dev->unit = (*e_drv->unit)++;
	    if ((*e_drv->attach)(e_dev) < 0) {
		/* Clean up after the device?? */
	    }
	    e_dev->kdc->kdc_unit = e_dev->unit;
	}
	else {
	    /* Announce unattached device */
	    printf("%s%ld:%d <%s> unknown device\n",
		   eisa_dev_list->dev.driver->name, /* Mainboard */
		   eisa_dev_list->dev.unit,
		   e_dev->ioconf.slot,
		   e_dev->full_name);
	}
    }
}

struct eisa_device *
eisa_match_dev(e_dev, match_func)
	struct eisa_device *e_dev;
	char* (*match_func)(eisa_id_t);
{
    struct eisa_device_node *e_node = eisa_dev_list;

    if(e_dev) {
	/* Start our search from the last successful match */
	 e_node = (struct eisa_device_node *)e_dev;
    }

    /*
     * The first node in the list is the motherboard, so don't bother
     * to look at it.
     */
    while (e_node->next != NULL) {
	char *result;
	e_node = e_node->next;
	if (e_node->dev.driver) {
	     /* Already claimed */
	    continue;
	}
	result = (*match_func)(e_node->dev.id);
	if (result) {
	    free(e_node->dev.full_name, M_DEVBUF);
	    e_node->dev.full_name = result;
	    return (&(e_node->dev));
	}
    }
    return NULL;
}

/* Interrupt and I/O space registration facitlities */
void
eisa_reg_start(e_dev)
	struct eisa_device *e_dev;
{
    /*
     * Announce the device.
     */
    printf("%s%ld: <%s>",
	   e_dev->driver->name,
	   e_dev->unit,
	   e_dev->full_name);
}

/* Interrupt and I/O space registration facitlities */
void
eisa_reg_end(e_dev)
	struct eisa_device *e_dev;
{
    printf(" on %s%ld slot %d\n",
	   eisa_dev_list->dev.driver->name, /* Mainboard */
	   eisa_dev_list->dev.unit,
	   e_dev->ioconf.slot);
}

int
eisa_add_intr(e_dev, irq)
	struct eisa_device *e_dev;
	int irq;
{
    e_dev->ioconf.irq |= 1ul << irq;
    return 0;
}

int
eisa_reg_intr(e_dev, irq, func, arg, maskptr, shared)
	struct eisa_device *e_dev;
	int   irq;
	void  (*func)(void *);
	void  *arg;
	u_int *maskptr;
	int   shared;
{
    int result;
    int s;

#if NOT_YET
    /* 
     * Punt on conflict detection for the moment.
     * I want to develop a generic routine to do
     * this for all device types.
     */
    int checkthese = CC_IRQ;
    if(haveseen_dev(dev, checkthese))
        return 1;
#endif
    s = splhigh();
    /*
     * This should really go to a routine that can optionally
     * handle shared interrupts.
     */
    result = register_intr(irq,                /* isa irq      */
			   0,                  /* deviced??    */
			   0,                  /* flags?       */
			   (inthand2_t*) func, /* handler      */
			   maskptr,            /* mask pointer */
			   (int)arg);          /* handler arg  */

    if (result) {
        printf ("eisa_reg_int: result=%d\n", result);
	splx(s);
        return (result);
    };
    update_intr_masks();
    splx(s);

    e_dev->ioconf.irq |= 1ul << irq;
    printf(" irq %d", irq);
    return (0);
}

int
eisa_release_intr(e_dev, irq, func)
	struct eisa_device *e_dev;
	int   irq;
	void  (*func)(void *);
{
    int result;
    int s;
        
    if (!(e_dev->ioconf.irq & (1ul << irq))) {
	printf("%s%ld: Attempted to release an interrupt (%d) it doesn't own\n",
		e_dev->driver->name, e_dev->unit, irq);
	return (-1);
    }

    s = splhigh();
    INTRDIS ((1ul<<irq));
        
    result = unregister_intr (irq, (inthand2_t*)func);
        
    if (result)
	printf ("eisa_release_intr: result=%d\n", result);
  
    update_intr_masks();

    splx(s);
    return (result);
}

int
eisa_enable_intr(e_dev, irq)
	struct eisa_device *e_dev;
	int irq;
{
    int s;

    if (!(e_dev->ioconf.irq & (1ul << irq))) {
	printf("%s%ld: Attempted to enable an interrupt (%d) it doesn't own\n",
		e_dev->driver->name, e_dev->unit, irq);
	return (-1);
    }
    s = splhigh();
    INTREN((1ul << irq));
    splx(s);
    return 0;
}

int
eisa_add_iospace(e_dev, iobase, iosize)
	struct eisa_device *e_dev;
	u_long	iobase;
	int	iosize;
{
    /*
     * We should develop a scheme for storing the results of
     * multiple calls to this function.
     */
    e_dev->ioconf.iobase = iobase;
    e_dev->ioconf.iosize = iosize;
    return 0;
}

int
eisa_reg_iospace(e_dev, iobase, iosize)
	struct eisa_device *e_dev;
	u_long	iobase;
	int	iosize;
{
    /*
     * We should develop a scheme for storing the results of
     * multiple calls to this function.
     */
#ifdef NOT_YET
    /* 
     * Punt on conflict detection for the moment.
     * I want to develop a generic routine to do
     * this for all device types.
     */
    int checkthese = CC_IOADDR;
    if(haveseen_dev(dev, checkthese))
        return -1;
#endif
    e_dev->ioconf.iobase = iobase;
    e_dev->ioconf.iosize = iosize;

    printf(" at 0x%lx-0x%lx", iobase, iobase + iosize - 1);
    return (0);
}

int
eisa_registerdev(e_dev, driver, kdc_template)
	struct eisa_device *e_dev;
	struct eisa_driver *driver;
	struct kern_devconf *kdc_template;
{
    e_dev->driver = driver;	/* Driver now owns this device */
    e_dev->kdc = (struct kern_devconf *)malloc(sizeof(struct kern_devconf),
						   M_DEVBUF, M_NOWAIT);
    if (!e_dev->kdc) {
	printf("WARNING: eisa_registerdev unable to malloc! "
	       "Device kdc will not be registerd\n");
	return 1;
    }
    bcopy(kdc_template, e_dev->kdc, sizeof(*kdc_template));
    e_dev->kdc->kdc_description = e_dev->full_name;
    dev_attach(e_dev->kdc);
    return (0);
}

/*
 * Provide EISA-specific device information to user programs using the
 * hw.devconf interface.
 */
int
eisa_externalize(struct eisa_device *id, void *userp, size_t *maxlen)
{
    if(*maxlen < (sizeof *id)) {
	return ENOMEM;
    }
    *maxlen -= (sizeof *id);
    return (copyout(id, userp, sizeof *id));
}


int
eisa_generic_externalize(struct proc *p, struct kern_devconf *kdc,
			 void *userp, size_t l)
{
    return eisa_externalize(kdc->kdc_eisa, userp, &l);
}