d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
488141d9e8
freebsd-skq/sys/dev/puc/puc.c

713 lines
17 KiB
C
Raw Normal View History

Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
/*-
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
* Copyright (c) 2006 Marcel Moolenaar
* All rights reserved.
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/malloc.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <sys/mutex.h>
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <dev/puc/puc_bus.h>
#include <dev/puc/puc_cfg.h>
Fix building with GCC 4.2: ensure types are defined before refering to them.
2006-06-29 16:27:19 +00:00
#include <dev/puc/puc_bfe.h>
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#define PUC_ISRCCNT 5
struct puc_port {
struct puc_bar *p_bar;
struct resource *p_rres;
struct resource *p_ires;
device_t p_dev;
int p_nr;
int p_type;
int p_rclk;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
int p_hasintr:1;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
serdev_intr_t *p_ihsrc[PUC_ISRCCNT];
void *p_iharg;
int p_ipend;
};
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Style: move a global variable up to the top of the file.
2002-09-03 11:18:35 +00:00
devclass_t puc_devclass;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
const char puc_driver_name[] = "puc";
Style: move a global variable up to the top of the file.
2002-09-03 11:18:35 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
MALLOC_DEFINE(M_PUC, "PUC", "PUC driver");
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_bar *
puc_get_bar(struct puc_softc *sc, int rid)
{
struct puc_bar *bar;
struct rman *rm;
u_long end, start;
int error, i;
/* Find the BAR entry with the given RID. */
i = 0;
while (i < PUC_PCI_BARS && sc->sc_bar[i].b_rid != rid)
i++;
if (i < PUC_PCI_BARS)
return (&sc->sc_bar[i]);
/* Not found. If we're looking for an unused entry, return NULL. */
if (rid == -1)
return (NULL);
/* Get an unused entry for us to fill. */
bar = puc_get_bar(sc, -1);
if (bar == NULL)
return (NULL);
bar->b_rid = rid;
bar->b_type = SYS_RES_IOPORT;
bar->b_res = bus_alloc_resource_any(sc->sc_dev, bar->b_type,
&bar->b_rid, RF_ACTIVE);
if (bar->b_res == NULL) {
bar->b_rid = rid;
bar->b_type = SYS_RES_MEMORY;
bar->b_res = bus_alloc_resource_any(sc->sc_dev, bar->b_type,
&bar->b_rid, RF_ACTIVE);
if (bar->b_res == NULL) {
bar->b_rid = -1;
return (NULL);
}
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
/* Update our managed space. */
rm = (bar->b_type == SYS_RES_IOPORT) ? &sc->sc_ioport : &sc->sc_iomem;
start = rman_get_start(bar->b_res);
end = rman_get_end(bar->b_res);
error = rman_manage_region(rm, start, end);
if (error) {
bus_release_resource(sc->sc_dev, bar->b_type, bar->b_rid,
bar->b_res);
bar->b_res = NULL;
bar->b_rid = -1;
bar = NULL;
fail gracefully rather than using an invalid array index if unable to allocate a bar; it's unclear whether this can happen in practice Noticed by: Coverity Prevent analysis tool Discussed with: marcel
2005-02-25 19:47:18 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (bar);
More cleaning up and unhacking: Don't expect all RIDs to be PCI rids. The previous code made at least 1 mistake, even for PCI. Give the card definitions a chance to specify a init function. Use this instead of the gross superio hack. Move the win877 init function to puc_pci.c where it belongs. RIDs can actually be zero, don't set badmuxed if so. Set a less incorrect end for the construct SYS_RES_IOPORT entries, I guess both sio and lpt happen to use 8 IO ports, but that shouldn't really be hardcoded this way. Fixup puc_pccard.c to match. We're getting closer.
2002-08-31 20:29:46 +00:00
}
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
static int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_intr(void *arg)
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
struct puc_softc *sc = arg;
u_long dev, devs;
int i, idx, ipend, isrc;
uint8_t ilr;
devs = sc->sc_serdevs;
if (sc->sc_ilr == PUC_ILR_DIGI) {
idx = 0;
while (devs & (0xfful << idx)) {
ilr = ~bus_read_1(sc->sc_port[idx].p_rres, 7);
devs &= ~0ul ^ ((u_long)ilr << idx);
idx += 8;
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
} else if (sc->sc_ilr == PUC_ILR_QUATECH) {
/*
* Don't trust the value if it's the same as the option
* register. It may mean that the ILR is not active and
* we're reading the option register instead. This may
* lead to false positives on 8-port boards.
*/
ilr = bus_read_1(sc->sc_port[0].p_rres, 7);
if (ilr != (sc->sc_cfg_data & 0xff))
devs &= (u_long)ilr;
}
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
ipend = 0;
idx = 0, dev = 1UL;
while (devs != 0UL) {
while ((devs & dev) == 0UL)
idx++, dev <<= 1;
devs &= ~dev;
port = &sc->sc_port[idx];
port->p_ipend = SERDEV_IPEND(port->p_dev);
ipend |= port->p_ipend;
}
i = 0, isrc = SER_INT_OVERRUN;
while (ipend) {
while (i < PUC_ISRCCNT && !(ipend & isrc))
i++, isrc <<= 1;
KASSERT(i < PUC_ISRCCNT, ("%s", __func__));
ipend &= ~isrc;
idx = 0, dev = 1UL;
devs = sc->sc_serdevs;
while (devs != 0UL) {
while ((devs & dev) == 0UL)
idx++, dev <<= 1;
devs &= ~dev;
port = &sc->sc_port[idx];
if (!(port->p_ipend & isrc))
continue;
if (port->p_ihsrc[i] != NULL)
(*port->p_ihsrc[i])(port->p_iharg);
}
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
return (FILTER_HANDLED);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
}
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
return (FILTER_STRAY);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bfe_attach(device_t dev)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
char buffer[64];
struct puc_bar *bar;
struct puc_port *port;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
struct puc_softc *sc;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct rman *rm;
intptr_t res;
bus_addr_t ofs, start;
bus_size_t size;
bus_space_handle_t bsh;
bus_space_tag_t bst;
int error, idx;
sc = device_get_softc(dev);
for (idx = 0; idx < PUC_PCI_BARS; idx++)
sc->sc_bar[idx].b_rid = -1;
do {
sc->sc_ioport.rm_type = RMAN_ARRAY;
error = rman_init(&sc->sc_ioport);
if (!error) {
sc->sc_iomem.rm_type = RMAN_ARRAY;
error = rman_init(&sc->sc_iomem);
if (!error) {
sc->sc_irq.rm_type = RMAN_ARRAY;
error = rman_init(&sc->sc_irq);
if (!error)
break;
rman_fini(&sc->sc_iomem);
}
rman_fini(&sc->sc_ioport);
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (error);
} while (0);
snprintf(buffer, sizeof(buffer), "%s I/O port mapping",
device_get_nameunit(dev));
sc->sc_ioport.rm_descr = strdup(buffer, M_PUC);
snprintf(buffer, sizeof(buffer), "%s I/O memory mapping",
device_get_nameunit(dev));
sc->sc_iomem.rm_descr = strdup(buffer, M_PUC);
snprintf(buffer, sizeof(buffer), "%s port numbers",
device_get_nameunit(dev));
sc->sc_irq.rm_descr = strdup(buffer, M_PUC);
error = puc_config(sc, PUC_CFG_GET_NPORTS, 0, &res);
KASSERT(error == 0, ("%s %d", __func__, __LINE__));
sc->sc_nports = (int)res;
sc->sc_port = malloc(sc->sc_nports * sizeof(struct puc_port),
M_PUC, M_WAITOK|M_ZERO);
error = rman_manage_region(&sc->sc_irq, 1, sc->sc_nports);
if (error)
goto fail;
error = puc_config(sc, PUC_CFG_SETUP, 0, &res);
if (error)
goto fail;
for (idx = 0; idx < sc->sc_nports; idx++) {
port = &sc->sc_port[idx];
port->p_nr = idx + 1;
error = puc_config(sc, PUC_CFG_GET_TYPE, idx, &res);
if (error)
goto fail;
port->p_type = res;
error = puc_config(sc, PUC_CFG_GET_RID, idx, &res);
if (error)
goto fail;
bar = puc_get_bar(sc, res);
if (bar == NULL) {
error = ENXIO;
goto fail;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
port->p_bar = bar;
start = rman_get_start(bar->b_res);
error = puc_config(sc, PUC_CFG_GET_OFS, idx, &res);
if (error)
goto fail;
ofs = res;
error = puc_config(sc, PUC_CFG_GET_LEN, idx, &res);
if (error)
goto fail;
size = res;
rm = (bar->b_type == SYS_RES_IOPORT)
? &sc->sc_ioport: &sc->sc_iomem;
port->p_rres = rman_reserve_resource(rm, start + ofs,
start + ofs + size - 1, size, 0, NULL);
if (port->p_rres != NULL) {
bsh = rman_get_bushandle(bar->b_res);
bst = rman_get_bustag(bar->b_res);
bus_space_subregion(bst, bsh, ofs, size, &bsh);
rman_set_bushandle(port->p_rres, bsh);
rman_set_bustag(port->p_rres, bst);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
port->p_ires = rman_reserve_resource(&sc->sc_irq, port->p_nr,
port->p_nr, 1, 0, NULL);
if (port->p_ires == NULL) {
error = ENXIO;
goto fail;
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
error = puc_config(sc, PUC_CFG_GET_CLOCK, idx, &res);
if (error)
goto fail;
port->p_rclk = res;
port->p_dev = device_add_child(dev, NULL, -1);
if (port->p_dev != NULL)
device_set_ivars(port->p_dev, (void *)port);
}
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
error = puc_config(sc, PUC_CFG_GET_ILR, 0, &res);
if (error)
goto fail;
sc->sc_ilr = res;
if (bootverbose && sc->sc_ilr != 0)
device_printf(dev, "using interrupt latch register\n");
sc->sc_irid = 0;
sc->sc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->sc_irid,
RF_ACTIVE|RF_SHAREABLE);
if (sc->sc_ires != NULL) {
error = bus_setup_intr(dev, sc->sc_ires,
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
INTR_TYPE_TTY, puc_intr, NULL, sc, &sc->sc_icookie);
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
if (error)
error = bus_setup_intr(dev, sc->sc_ires,
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
INTR_TYPE_TTY | INTR_MPSAFE, NULL,
(driver_intr_t *)puc_intr, sc, &sc->sc_icookie);
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
else
sc->sc_fastintr = 1;
if (error) {
device_printf(dev, "could not activate interrupt\n");
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irid,
sc->sc_ires);
sc->sc_ires = NULL;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
}
if (sc->sc_ires == NULL) {
/* XXX no interrupt resource. Force polled mode. */
sc->sc_polled = 1;
}
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
/* Probe and attach our children. */
for (idx = 0; idx < sc->sc_nports; idx++) {
port = &sc->sc_port[idx];
if (port->p_dev == NULL)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
continue;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
error = device_probe_and_attach(port->p_dev);
if (error) {
device_delete_child(dev, port->p_dev);
port->p_dev = NULL;
Release allocated memory and bus_space_handle on an error. Reviewed by: jhay
2002-02-19 14:58:11 +00:00
}
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
/*
* If there are no serdev devices, then our interrupt handler
* will do nothing. Tear it down.
*/
if (sc->sc_serdevs == 0UL)
bus_teardown_intr(dev, sc->sc_ires, sc->sc_icookie);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (0);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
fail:
for (idx = 0; idx < sc->sc_nports; idx++) {
port = &sc->sc_port[idx];
if (port->p_dev != NULL)
device_delete_child(dev, port->p_dev);
if (port->p_rres != NULL)
rman_release_resource(port->p_rres);
if (port->p_ires != NULL)
rman_release_resource(port->p_ires);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
for (idx = 0; idx < PUC_PCI_BARS; idx++) {
bar = &sc->sc_bar[idx];
if (bar->b_res != NULL)
bus_release_resource(sc->sc_dev, bar->b_type,
bar->b_rid, bar->b_res);
}
rman_fini(&sc->sc_irq);
free(__DECONST(void *, sc->sc_irq.rm_descr), M_PUC);
rman_fini(&sc->sc_iomem);
free(__DECONST(void *, sc->sc_iomem.rm_descr), M_PUC);
rman_fini(&sc->sc_ioport);
free(__DECONST(void *, sc->sc_ioport.rm_descr), M_PUC);
free(sc->sc_port, M_PUC);
return (error);
- Add minimal support for TI16754 4xUART chip into sio(4) driver and remove now unnecessary hack from the previous commit; - Add support for Interrupt Latch Register (ILR) into puc(4). So far only ILRs compatible with specifications from Digi International are supported. Support for other types of ILRs could be easily added later; - Correct clock frequency for IC Book Labs Dreadnought x16 Lite board; - Enable ILR detection/usage for IC Book Labs Dreadnought x16 boards. Sponsored by: IC Book Labs MFC after: 2 weeks
2003-03-15 16:25:40 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
int
puc_bfe_detach(device_t dev)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_bar *bar;
struct puc_port *port;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
struct puc_softc *sc;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
int error, idx;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
sc = device_get_softc(dev);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
/* Detach our children. */
error = 0;
for (idx = 0; idx < sc->sc_nports; idx++) {
port = &sc->sc_port[idx];
if (port->p_dev == NULL)
continue;
if (device_detach(port->p_dev) == 0) {
device_delete_child(dev, port->p_dev);
if (port->p_rres != NULL)
rman_release_resource(port->p_rres);
if (port->p_ires != NULL)
rman_release_resource(port->p_ires);
} else
error = ENXIO;
}
if (error)
return (error);
if (sc->sc_serdevs != 0UL)
bus_teardown_intr(dev, sc->sc_ires, sc->sc_icookie);
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irid, sc->sc_ires);
for (idx = 0; idx < PUC_PCI_BARS; idx++) {
bar = &sc->sc_bar[idx];
if (bar->b_res != NULL)
bus_release_resource(sc->sc_dev, bar->b_type,
bar->b_rid, bar->b_res);
}
rman_fini(&sc->sc_irq);
free(__DECONST(void *, sc->sc_irq.rm_descr), M_PUC);
rman_fini(&sc->sc_iomem);
free(__DECONST(void *, sc->sc_iomem.rm_descr), M_PUC);
rman_fini(&sc->sc_ioport);
free(__DECONST(void *, sc->sc_ioport.rm_descr), M_PUC);
free(sc->sc_port, M_PUC);
return (0);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
int
puc_bfe_probe(device_t dev, const struct puc_cfg *cfg)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_softc *sc;
intptr_t res;
int error;
sc = device_get_softc(dev);
sc->sc_dev = dev;
sc->sc_cfg = cfg;
/* We don't attach to single-port serial cards. */
if (cfg->ports == PUC_PORT_1S || cfg->ports == PUC_PORT_1P)
return (EDOOFUS);
error = puc_config(sc, PUC_CFG_GET_NPORTS, 0, &res);
if (error)
return (error);
error = puc_config(sc, PUC_CFG_GET_DESC, 0, &res);
if (error)
return (error);
if (res != 0)
device_set_desc(dev, (const char *)res);
return (BUS_PROBE_DEFAULT);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
struct resource *
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bus_alloc_resource(device_t dev, device_t child, int type, int *rid,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
u_long start, u_long end, u_long count, u_int flags)
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
struct resource *res;
device_t assigned, originator;
int error;
/* Get our immediate child. */
originator = child;
while (child != NULL && device_get_parent(child) != dev)
child = device_get_parent(child);
if (child == NULL)
return (NULL);
port = device_get_ivars(child);
KASSERT(port != NULL, ("%s %d", __func__, __LINE__));
if (rid == NULL || *rid != 0)
return (NULL);
/* We only support default allocations. */
if (start != 0UL || end != ~0UL)
return (NULL);
if (type == port->p_bar->b_type)
res = port->p_rres;
else if (type == SYS_RES_IRQ)
res = port->p_ires;
Add printer support to puc(4) driver. - Move isa/ppc* to sys/dev/ppc (repo-copy) - Add an attachment method to ppc for puc - In puc we need to walk the chain of parents. Still to do, is to make ppc(4) & puc(4) work on other platforms. Testers wanted. PR: 38372 (in spirit done differently) Verified by: Make universe (if I messed up a platform please fix)
2003-08-01 02:25:32 +00:00
else
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (NULL);
if (res == NULL)
return (NULL);
assigned = rman_get_device(res);
if (assigned == NULL) /* Not allocated */
rman_set_device(res, originator);
else if (assigned != originator)
return (NULL);
if (flags & RF_ACTIVE) {
error = rman_activate_resource(res);
if (error) {
if (assigned == NULL)
rman_set_device(res, NULL);
return (NULL);
}
}
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (res);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bus_release_resource(device_t dev, device_t child, int type, int rid,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
struct resource *res)
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
device_t originator;
/* Get our immediate child. */
originator = child;
while (child != NULL && device_get_parent(child) != dev)
child = device_get_parent(child);
if (child == NULL)
return (EINVAL);
port = device_get_ivars(child);
KASSERT(port != NULL, ("%s %d", __func__, __LINE__));
if (rid != 0 || res == NULL)
return (EINVAL);
if (type == port->p_bar->b_type) {
if (res != port->p_rres)
return (EINVAL);
} else if (type == SYS_RES_IRQ) {
if (res != port->p_ires)
return (EINVAL);
if (port->p_hasintr)
return (EBUSY);
} else
return (EINVAL);
if (rman_get_device(res) != originator)
return (ENXIO);
if (rman_get_flags(res) & RF_ACTIVE)
rman_deactivate_resource(res);
rman_set_device(res, NULL);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
return (0);
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bus_get_resource(device_t dev, device_t child, int type, int rid,
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
u_long *startp, u_long *countp)
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
struct resource *res;
u_long start;
/* Get our immediate child. */
while (child != NULL && device_get_parent(child) != dev)
child = device_get_parent(child);
if (child == NULL)
return (EINVAL);
port = device_get_ivars(child);
KASSERT(port != NULL, ("%s %d", __func__, __LINE__));
if (type == port->p_bar->b_type)
res = port->p_rres;
else if (type == SYS_RES_IRQ)
res = port->p_ires;
else
return (ENXIO);
if (rid != 0 || res == NULL)
return (ENXIO);
start = rman_get_start(res);
if (startp != NULL)
*startp = start;
if (countp != NULL)
*countp = rman_get_end(res) - start + 1;
return (0);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bus_setup_intr(device_t dev, device_t child, struct resource *res,
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
int flags, driver_filter_t *filt, void (*ihand)(void *), void *arg, void **cookiep)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
struct puc_softc *sc;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
device_t originator;
int i, isrc, serdev;
sc = device_get_softc(dev);
/* Get our immediate child. */
originator = child;
while (child != NULL && device_get_parent(child) != dev)
child = device_get_parent(child);
if (child == NULL)
return (EINVAL);
port = device_get_ivars(child);
KASSERT(port != NULL, ("%s %d", __func__, __LINE__));
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
-axe p_ih from struct puc_port cause it was useless -correctly check for filter only handler Reviewed by: marcel Tested by: marcel
2007-06-06 22:17:01 +00:00
if (cookiep == NULL || res != port->p_ires)
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (EINVAL);
-axe p_ih from struct puc_port cause it was useless -correctly check for filter only handler Reviewed by: marcel Tested by: marcel
2007-06-06 22:17:01 +00:00
/* We demand that serdev devices use filter_only interrupts. */
if (ihand != NULL)
return (ENXIO);
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
if (rman_get_device(port->p_ires) != originator)
Bring back the PUC_FASTINTR option, and implement it correctly so that child devices also know if they are fast or normal. Requested by: bde
2002-09-04 15:29:04 +00:00
return (ENXIO);
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
/*
* Have non-serdev ports handled by the bus implementation. It
* supports multiple handlers for a single interrupt as it is,
* so we wouldn't add value if we did it ourselves.
*/
serdev = 0;
if (port->p_type == PUC_TYPE_SERIAL) {
i = 0, isrc = SER_INT_OVERRUN;
while (i < PUC_ISRCCNT) {
port->p_ihsrc[i] = SERDEV_IHAND(originator, isrc);
if (port->p_ihsrc[i] != NULL)
serdev = 1;
i++, isrc <<= 1;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
if (!serdev)
return (BUS_SETUP_INTR(device_get_parent(dev), originator,
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
sc->sc_ires, flags, filt, ihand, arg, cookiep));
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
sc->sc_serdevs |= 1UL << (port->p_nr - 1);
port->p_hasintr = 1;
port->p_iharg = arg;
*cookiep = port;
return (0);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bus_teardown_intr(device_t dev, device_t child, struct resource *res,
void *cookie)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
struct puc_softc *sc;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
device_t originator;
int i;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
sc = device_get_softc(dev);
/* Get our immediate child. */
originator = child;
while (child != NULL && device_get_parent(child) != dev)
child = device_get_parent(child);
if (child == NULL)
return (EINVAL);
port = device_get_ivars(child);
KASSERT(port != NULL, ("%s %d", __func__, __LINE__));
if (res != port->p_ires)
return (EINVAL);
if (rman_get_device(port->p_ires) != originator)
return (ENXIO);
if (!port->p_hasintr)
return (BUS_TEARDOWN_INTR(device_get_parent(dev), originator,
sc->sc_ires, cookie));
if (cookie != port)
return (EINVAL);
port->p_hasintr = 0;
port->p_iharg = NULL;
for (i = 0; i < PUC_ISRCCNT; i++)
port->p_ihsrc[i] = NULL;
return (0);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
int
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_bus_read_ivar(device_t dev, device_t child, int index, uintptr_t *result)
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
struct puc_port *port;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
/* Get our immediate child. */
while (child != NULL && device_get_parent(child) != dev)
child = device_get_parent(child);
if (child == NULL)
return (EINVAL);
port = device_get_ivars(child);
KASSERT(port != NULL, ("%s %d", __func__, __LINE__));
if (result == NULL)
return (EINVAL);
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
switch(index) {
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
case PUC_IVAR_CLOCK:
*result = port->p_rclk;
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
break;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
case PUC_IVAR_TYPE:
*result = port->p_type;
Make the port number available to the sub-device with PUC_IVAR_PORT.
2003-09-26 04:44:55 +00:00
break;
Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
default:
return (ENOENT);
}
return (0);
}
Reference in New Issue Copy Permalink