freebsd-skq/sys/dev/usb/uhid.c

755 lines
18 KiB
C
Raw Normal View History

/* $NetBSD: uhid.c,v 1.46 2001/11/13 06:24:55 lukem Exp $ */
/* Also already merged from NetBSD:
* $NetBSD: uhid.c,v 1.54 2002/09/23 05:51:21 simonb Exp $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
2000-05-14 16:43:10 +00:00
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
1999-05-03 23:13:14 +00:00
/*
* HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf
1999-05-03 23:13:14 +00:00
*/
2007-06-18 22:27:57 +00:00
/*
* XXX TODO: Convert this driver to use si_drv[12] rather than the
* devclass_get_softc junk
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/signalvar.h>
#include <sys/fcntl.h>
#include <sys/ioccom.h>
#include <sys/filio.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/ioccom.h>
#include <sys/conf.h>
#include <sys/tty.h>
#include <sys/selinfo.h>
#include <sys/proc.h>
#include <sys/poll.h>
#include <sys/sysctl.h>
#include <sys/uio.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbhid.h>
#include "usbdevs.h"
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/hid.h>
/* Replacement report descriptors for devices shipped with broken ones */
#include <dev/usb/ugraphire_rdesc.h>
#include <dev/usb/uxb360gp_rdesc.h>
/* For hid blacklist quirk */
#include <dev/usb/usb_quirks.h>
#ifdef USB_DEBUG
2007-06-20 05:11:37 +00:00
#define DPRINTF(x) if (uhiddebug) printf x
#define DPRINTFN(n,x) if (uhiddebug>(n)) printf x
int uhiddebug = 0;
SYSCTL_NODE(_hw_usb, OID_AUTO, uhid, CTLFLAG_RW, 0, "USB uhid");
SYSCTL_INT(_hw_usb_uhid, OID_AUTO, debug, CTLFLAG_RW,
&uhiddebug, 0, "uhid debug level");
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
struct uhid_softc {
device_t sc_dev; /* base device */
usbd_device_handle sc_udev;
usbd_interface_handle sc_iface; /* interface */
usbd_pipe_handle sc_intrpipe; /* interrupt pipe */
int sc_ep_addr;
int sc_isize;
int sc_osize;
int sc_fsize;
u_int8_t sc_iid;
u_int8_t sc_oid;
u_int8_t sc_fid;
u_char *sc_ibuf;
u_char *sc_obuf;
void *sc_repdesc;
int sc_repdesc_size;
struct clist sc_q;
struct selinfo sc_rsel;
struct proc *sc_async; /* process that wants SIGIO */
u_char sc_state; /* driver state */
#define UHID_OPEN 0x01 /* device is open */
#define UHID_ASLP 0x02 /* waiting for device data */
#define UHID_NEEDCLEAR 0x04 /* needs clearing endpoint stall */
#define UHID_IMMED 0x08 /* return read data immediately */
int sc_refcnt;
u_char sc_dying;
struct cdev *dev;
};
#define UHIDUNIT(dev) (minor(dev))
#define UHID_CHUNK 128 /* chunk size for read */
#define UHID_BSIZE 1020 /* buffer size */
d_open_t uhidopen;
d_close_t uhidclose;
d_read_t uhidread;
d_write_t uhidwrite;
d_ioctl_t uhidioctl;
d_poll_t uhidpoll;
static struct cdevsw uhid_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = uhidopen,
.d_close = uhidclose,
.d_read = uhidread,
.d_write = uhidwrite,
.d_ioctl = uhidioctl,
.d_poll = uhidpoll,
.d_name = "uhid",
};
static void uhid_intr(usbd_xfer_handle, usbd_private_handle,
usbd_status);
static int uhid_do_read(struct uhid_softc *, struct uio *uio, int);
static int uhid_do_write(struct uhid_softc *, struct uio *uio, int);
static int uhid_do_ioctl(struct uhid_softc *, u_long, caddr_t, int,
2007-06-12 17:30:54 +00:00
struct thread *);
2007-06-18 22:27:57 +00:00
MODULE_DEPEND(uhid, usb, 1, 1, 1);
static device_probe_t uhid_match;
static device_attach_t uhid_attach;
static device_detach_t uhid_detach;
static device_method_t uhid_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, uhid_match),
DEVMETHOD(device_attach, uhid_attach),
DEVMETHOD(device_detach, uhid_detach),
{ 0, 0 }
};
static driver_t uhid_driver = {
"uhid",
uhid_methods,
sizeof(struct uhid_softc)
};
static devclass_t uhid_devclass;
DRIVER_MODULE(uhid, uhub, uhid_driver, uhid_devclass, usbd_driver_load, 0);
static int
uhid_match(device_t self)
{
2007-06-17 16:24:49 +00:00
struct usb_attach_arg *uaa = device_get_ivars(self);
usb_interface_descriptor_t *id;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (uaa->iface == NULL)
return (UMATCH_NONE);
id = usbd_get_interface_descriptor(uaa->iface);
if (id == NULL)
return (UMATCH_NONE);
if (id->bInterfaceClass != UICLASS_HID) {
/* The Xbox 360 gamepad doesn't use the HID class. */
if (id->bInterfaceClass != UICLASS_VENDOR ||
id->bInterfaceSubClass != UISUBCLASS_XBOX360_CONTROLLER ||
id->bInterfaceProtocol != UIPROTO_XBOX360_GAMEPAD)
return (UMATCH_NONE);
}
if (usbd_get_quirks(uaa->device)->uq_flags & UQ_HID_IGNORE)
return (UMATCH_NONE);
#if 0
if (uaa->matchlvl)
return (uaa->matchlvl);
#endif
return (UMATCH_IFACECLASS_GENERIC);
}
static int
uhid_attach(device_t self)
{
2007-06-18 22:27:57 +00:00
struct uhid_softc *sc = device_get_softc(self);
struct usb_attach_arg *uaa = device_get_ivars(self);
usbd_interface_handle iface = uaa->iface;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int size;
void *desc;
const void *descptr;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
sc->sc_dev = self;
sc->sc_udev = uaa->device;
sc->sc_iface = iface;
id = usbd_get_interface_descriptor(iface);
ed = usbd_interface2endpoint_descriptor(iface, 0);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (ed == NULL) {
printf("%s: could not read endpoint descriptor\n",
device_get_nameunit(sc->sc_dev));
sc->sc_dying = 1;
return ENXIO;
}
DPRINTFN(10,("uhid_attach: bLength=%d bDescriptorType=%d "
"bEndpointAddress=%d-%s bmAttributes=%d wMaxPacketSize=%d"
" bInterval=%d\n",
ed->bLength, ed->bDescriptorType,
ed->bEndpointAddress & UE_ADDR,
UE_GET_DIR(ed->bEndpointAddress)==UE_DIR_IN? "in" : "out",
ed->bmAttributes & UE_XFERTYPE,
UGETW(ed->wMaxPacketSize), ed->bInterval));
if (UE_GET_DIR(ed->bEndpointAddress) != UE_DIR_IN ||
(ed->bmAttributes & UE_XFERTYPE) != UE_INTERRUPT) {
printf("%s: unexpected endpoint\n", device_get_nameunit(sc->sc_dev));
sc->sc_dying = 1;
return ENXIO;
}
sc->sc_ep_addr = ed->bEndpointAddress;
descptr = NULL;
if (uaa->vendor == USB_VENDOR_WACOM) {
/* The report descriptor for the Wacom Graphire is broken. */
if (uaa->product == USB_PRODUCT_WACOM_GRAPHIRE) {
size = sizeof uhid_graphire_report_descr;
descptr = uhid_graphire_report_descr;
} else if (uaa->product == USB_PRODUCT_WACOM_GRAPHIRE3_4X5) {
static uByte reportbuf[] = {2, 2, 2};
/*
* The Graphire3 needs 0x0202 to be written to
* feature report ID 2 before it'll start
* returning digitizer data.
*/
usbd_set_report(uaa->iface, UHID_FEATURE_REPORT, 2,
&reportbuf, sizeof reportbuf);
size = sizeof uhid_graphire3_4x5_report_descr;
descptr = uhid_graphire3_4x5_report_descr;
}
} else if (id->bInterfaceClass == UICLASS_VENDOR &&
id->bInterfaceSubClass == UISUBCLASS_XBOX360_CONTROLLER &&
id->bInterfaceProtocol == UIPROTO_XBOX360_GAMEPAD) {
static uByte reportbuf[] = {1, 3, 0};
/* The LEDs on the gamepad are blinking by default, turn off. */
usbd_set_report(uaa->iface, UHID_OUTPUT_REPORT, 0,
&reportbuf, sizeof reportbuf);
/* The Xbox 360 gamepad has no report descriptor. */
size = sizeof uhid_xb360gp_report_descr;
descptr = uhid_xb360gp_report_descr;
}
if (descptr) {
desc = malloc(size, M_USBDEV, M_NOWAIT);
if (desc == NULL)
err = USBD_NOMEM;
else {
err = USBD_NORMAL_COMPLETION;
memcpy(desc, descptr, size);
}
} else {
desc = NULL;
err = usbd_read_report_desc(uaa->iface, &desc, &size,M_USBDEV);
}
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err) {
printf("%s: no report descriptor\n", device_get_nameunit(sc->sc_dev));
sc->sc_dying = 1;
return ENXIO;
}
(void)usbd_set_idle(iface, 0, 0);
sc->sc_isize = hid_report_size(desc, size, hid_input, &sc->sc_iid);
sc->sc_osize = hid_report_size(desc, size, hid_output, &sc->sc_oid);
sc->sc_fsize = hid_report_size(desc, size, hid_feature, &sc->sc_fid);
sc->sc_repdesc = desc;
sc->sc_repdesc_size = size;
sc->dev = make_dev(&uhid_cdevsw, device_get_unit(self),
UID_ROOT, GID_OPERATOR,
0644, "uhid%d", device_get_unit(self));
return 0;
}
static int
uhid_detach(device_t self)
{
2007-06-18 22:27:57 +00:00
struct uhid_softc *sc = device_get_softc(self);
int s;
DPRINTF(("uhid_detach: sc=%p\n", sc));
sc->sc_dying = 1;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (sc->sc_intrpipe != NULL)
usbd_abort_pipe(sc->sc_intrpipe);
if (sc->sc_state & UHID_OPEN) {
s = splusb();
if (--sc->sc_refcnt >= 0) {
/* Wake everyone */
wakeup(&sc->sc_q);
/* Wait for processes to go away. */
usb_detach_wait(sc->sc_dev);
}
splx(s);
}
destroy_dev(sc->dev);
if (sc->sc_repdesc)
free(sc->sc_repdesc, M_USBDEV);
return (0);
}
void
uhid_intr(usbd_xfer_handle xfer, usbd_private_handle addr, usbd_status status)
{
struct uhid_softc *sc = addr;
#ifdef USB_DEBUG
if (uhiddebug > 5) {
u_int32_t cc, i;
usbd_get_xfer_status(xfer, NULL, NULL, &cc, NULL);
DPRINTF(("uhid_intr: status=%d cc=%d\n", status, cc));
DPRINTF(("uhid_intr: data ="));
for (i = 0; i < cc; i++)
DPRINTF((" %02x", sc->sc_ibuf[i]));
DPRINTF(("\n"));
}
#endif
if (status == USBD_CANCELLED)
return;
if (status != USBD_NORMAL_COMPLETION) {
DPRINTF(("uhid_intr: status=%d\n", status));
if (status == USBD_STALLED)
sc->sc_state |= UHID_NEEDCLEAR;
return;
}
(void) b_to_q(sc->sc_ibuf, sc->sc_isize, &sc->sc_q);
if (sc->sc_state & UHID_ASLP) {
sc->sc_state &= ~UHID_ASLP;
DPRINTFN(5, ("uhid_intr: waking %p\n", &sc->sc_q));
wakeup(&sc->sc_q);
}
selwakeuppri(&sc->sc_rsel, PZERO);
if (sc->sc_async != NULL) {
DPRINTFN(3, ("uhid_intr: sending SIGIO %p\n", sc->sc_async));
PROC_LOCK(sc->sc_async);
psignal(sc->sc_async, SIGIO);
PROC_UNLOCK(sc->sc_async);
}
}
int
2007-06-12 17:30:54 +00:00
uhidopen(struct cdev *dev, int flag, int mode, struct thread *p)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct uhid_softc *sc;
usbd_status err;
2007-06-18 22:27:57 +00:00
sc = devclass_get_softc(uhid_devclass, UHIDUNIT(dev));
if (sc == NULL)
return (ENXIO);
DPRINTF(("uhidopen: sc=%p\n", sc));
if (sc->sc_dying)
return (ENXIO);
if (sc->sc_state & UHID_OPEN)
return (EBUSY);
sc->sc_state |= UHID_OPEN;
clist_alloc_cblocks(&sc->sc_q, UHID_BSIZE, UHID_BSIZE);
sc->sc_ibuf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
sc->sc_obuf = malloc(sc->sc_osize, M_USBDEV, M_WAITOK);
/* Set up interrupt pipe. */
err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ep_addr,
USBD_SHORT_XFER_OK, &sc->sc_intrpipe, sc, sc->sc_ibuf,
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
sc->sc_isize, uhid_intr, USBD_DEFAULT_INTERVAL);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err) {
DPRINTF(("uhidopen: usbd_open_pipe_intr failed, "
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
"error=%d\n",err));
free(sc->sc_ibuf, M_USBDEV);
free(sc->sc_obuf, M_USBDEV);
sc->sc_ibuf = sc->sc_obuf = NULL;
sc->sc_state &= ~UHID_OPEN;
return (EIO);
}
sc->sc_state &= ~UHID_IMMED;
sc->sc_async = 0;
return (0);
}
int
2007-06-12 17:30:54 +00:00
uhidclose(struct cdev *dev, int flag, int mode, struct thread *p)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct uhid_softc *sc;
2007-06-18 22:27:57 +00:00
sc = devclass_get_softc(uhid_devclass, UHIDUNIT(dev));
DPRINTF(("uhidclose: sc=%p\n", sc));
/* Disable interrupts. */
usbd_abort_pipe(sc->sc_intrpipe);
usbd_close_pipe(sc->sc_intrpipe);
sc->sc_intrpipe = 0;
ndflush(&sc->sc_q, sc->sc_q.c_cc);
clist_free_cblocks(&sc->sc_q);
free(sc->sc_ibuf, M_USBDEV);
free(sc->sc_obuf, M_USBDEV);
sc->sc_ibuf = sc->sc_obuf = NULL;
sc->sc_state &= ~UHID_OPEN;
sc->sc_async = 0;
return (0);
}
int
uhid_do_read(struct uhid_softc *sc, struct uio *uio, int flag)
{
int s;
int error = 0;
size_t length;
u_char buffer[UHID_CHUNK];
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
DPRINTFN(1, ("uhidread\n"));
if (sc->sc_state & UHID_IMMED) {
DPRINTFN(1, ("uhidread immed\n"));
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_get_report(sc->sc_iface, UHID_INPUT_REPORT,
sc->sc_iid, buffer, sc->sc_isize);
if (err)
return (EIO);
return (uiomove(buffer, sc->sc_isize, uio));
}
s = splusb();
while (sc->sc_q.c_cc == 0) {
if (flag & O_NONBLOCK) {
splx(s);
return (EWOULDBLOCK);
}
sc->sc_state |= UHID_ASLP;
DPRINTFN(5, ("uhidread: sleep on %p\n", &sc->sc_q));
error = tsleep(&sc->sc_q, PZERO | PCATCH, "uhidrea", 0);
DPRINTFN(5, ("uhidread: woke, error=%d\n", error));
if (sc->sc_dying)
error = EIO;
if (error) {
sc->sc_state &= ~UHID_ASLP;
break;
}
if (sc->sc_state & UHID_NEEDCLEAR) {
DPRINTFN(-1,("uhidread: clearing stall\n"));
sc->sc_state &= ~UHID_NEEDCLEAR;
usbd_clear_endpoint_stall(sc->sc_intrpipe);
}
}
splx(s);
/* Transfer as many chunks as possible. */
while (sc->sc_q.c_cc > 0 && uio->uio_resid > 0 && !error) {
length = min(sc->sc_q.c_cc, uio->uio_resid);
if (length > sizeof(buffer))
length = sizeof(buffer);
/* Remove a small chunk from the input queue. */
(void) q_to_b(&sc->sc_q, buffer, length);
DPRINTFN(5, ("uhidread: got %lu chars\n", (u_long)length));
/* Copy the data to the user process. */
if ((error = uiomove(buffer, length, uio)) != 0)
break;
}
return (error);
}
int
uhidread(struct cdev *dev, struct uio *uio, int flag)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct uhid_softc *sc;
int error;
2007-06-18 22:27:57 +00:00
sc = devclass_get_softc(uhid_devclass, UHIDUNIT(dev));
sc->sc_refcnt++;
error = uhid_do_read(sc, uio, flag);
if (--sc->sc_refcnt < 0)
usb_detach_wakeup(sc->sc_dev);
return (error);
}
int
uhid_do_write(struct uhid_softc *sc, struct uio *uio, int flag)
{
int error;
int size;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
DPRINTFN(1, ("uhidwrite\n"));
if (sc->sc_dying)
return (EIO);
size = sc->sc_osize;
error = 0;
if (uio->uio_resid != size)
return (EINVAL);
error = uiomove(sc->sc_obuf, size, uio);
if (!error) {
if (sc->sc_oid)
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_set_report(sc->sc_iface, UHID_OUTPUT_REPORT,
sc->sc_obuf[0], sc->sc_obuf+1, size-1);
else
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
err = usbd_set_report(sc->sc_iface, UHID_OUTPUT_REPORT,
0, sc->sc_obuf, size);
if (err)
error = EIO;
}
return (error);
}
int
uhidwrite(struct cdev *dev, struct uio *uio, int flag)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct uhid_softc *sc;
int error;
2007-06-18 22:27:57 +00:00
sc = devclass_get_softc(uhid_devclass, UHIDUNIT(dev));
sc->sc_refcnt++;
error = uhid_do_write(sc, uio, flag);
if (--sc->sc_refcnt < 0)
usb_detach_wakeup(sc->sc_dev);
return (error);
}
int
uhid_do_ioctl(struct uhid_softc *sc, u_long cmd, caddr_t addr, int flag,
2007-06-12 17:30:54 +00:00
struct thread *p)
{
struct usb_ctl_report_desc *rd;
struct usb_ctl_report *re;
int size, id;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
usbd_status err;
DPRINTFN(2, ("uhidioctl: cmd=%lx\n", cmd));
if (sc->sc_dying)
return (EIO);
switch (cmd) {
case FIONBIO:
/* All handled in the upper FS layer. */
break;
case FIOASYNC:
if (*(int *)addr) {
if (sc->sc_async != NULL)
return (EBUSY);
sc->sc_async = p->td_proc;
DPRINTF(("uhid_do_ioctl: FIOASYNC %p\n", sc->sc_async));
} else
sc->sc_async = NULL;
break;
/* XXX this is not the most general solution. */
case TIOCSPGRP:
if (sc->sc_async == NULL)
return (EINVAL);
if (*(int *)addr != sc->sc_async->p_pgid)
return (EPERM);
break;
case USB_GET_REPORT_DESC:
rd = (struct usb_ctl_report_desc *)addr;
size = min(sc->sc_repdesc_size, sizeof rd->ucrd_data);
rd->ucrd_size = size;
memcpy(rd->ucrd_data, sc->sc_repdesc, size);
break;
case USB_SET_IMMED:
if (*(int *)addr) {
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
/* XXX should read into ibuf, but does it matter? */
err = usbd_get_report(sc->sc_iface, UHID_INPUT_REPORT,
sc->sc_iid, sc->sc_ibuf, sc->sc_isize);
if (err)
return (EOPNOTSUPP);
sc->sc_state |= UHID_IMMED;
} else
sc->sc_state &= ~UHID_IMMED;
break;
case USB_GET_REPORT:
re = (struct usb_ctl_report *)addr;
switch (re->ucr_report) {
case UHID_INPUT_REPORT:
size = sc->sc_isize;
id = sc->sc_iid;
break;
case UHID_OUTPUT_REPORT:
size = sc->sc_osize;
id = sc->sc_oid;
break;
case UHID_FEATURE_REPORT:
size = sc->sc_fsize;
id = sc->sc_fid;
break;
default:
return (EINVAL);
}
err = usbd_get_report(sc->sc_iface, re->ucr_report, id, re->ucr_data,
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
size);
if (err)
return (EIO);
break;
case USB_SET_REPORT:
re = (struct usb_ctl_report *)addr;
switch (re->ucr_report) {
case UHID_INPUT_REPORT:
size = sc->sc_isize;
id = sc->sc_iid;
break;
case UHID_OUTPUT_REPORT:
size = sc->sc_osize;
id = sc->sc_oid;
break;
case UHID_FEATURE_REPORT:
size = sc->sc_fsize;
id = sc->sc_fid;
break;
default:
return (EINVAL);
}
err = usbd_set_report(sc->sc_iface, re->ucr_report, id, re->ucr_data,
size);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
if (err)
return (EIO);
break;
case USB_GET_REPORT_ID:
*(int *)addr = 0; /* XXX: we only support reportid 0? */
break;
default:
return (EINVAL);
}
return (0);
}
int
2007-06-12 17:30:54 +00:00
uhidioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *p)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct uhid_softc *sc;
int error;
2007-06-18 22:27:57 +00:00
sc = devclass_get_softc(uhid_devclass, UHIDUNIT(dev));
sc->sc_refcnt++;
error = uhid_do_ioctl(sc, cmd, addr, flag, p);
if (--sc->sc_refcnt < 0)
usb_detach_wakeup(sc->sc_dev);
return (error);
}
int
2007-06-12 17:30:54 +00:00
uhidpoll(struct cdev *dev, int events, struct thread *p)
{
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
struct uhid_softc *sc;
int revents = 0;
int s;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
2007-06-18 22:27:57 +00:00
sc = devclass_get_softc(uhid_devclass, UHIDUNIT(dev));
if (sc->sc_dying)
return (EIO);
s = splusb();
if (events & (POLLOUT | POLLWRNORM))
revents |= events & (POLLOUT | POLLWRNORM);
if (events & (POLLIN | POLLRDNORM)) {
if (sc->sc_q.c_cc > 0)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(p, &sc->sc_rsel);
}
splx(s);
return (revents);
}