d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4af396a52d
freebsd-skq/sys/modules/sf/Makefile

29 lines
643 B
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
This commit adds device driver support for Adaptec Duralink PCI fast ethernet controllers based on the AIC-6915 "Starfire" controller chip. There are single port, dual port and quad port cards, plus one 100baseFX card. All are 64-bit PCI devices, except one single port model. The Starfire would be a very nice chip were it not for the fact that receive buffers have to be longword aligned. This requires buffer copying in order to achieve proper payload alignment on the alpha. Payload alignment is enforced on both the alpha and x86 platforms. The Starfire has several different DMA descriptor formats and transfer mechanisms. This driver uses frame descriptors for transmission which can address up to 14 packet fragments, and a single fragment descriptor for receive. It also uses the producer/consumer model and completion queues for both transmit and receive. The transmit ring has 128 descriptors and the receive ring has 256. This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus so that it can be compiled as a loadable kernel module. Support for BPF and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
S = ${.CURDIR}/../..
.PATH: $S/pci
KMOD = sf
SRCS = if_sf.c sf.h bpf.h opt_bdg.h device_if.h bus_if.h pci_if.h
CLEANFILES += sf.h bpf.h opt_bdg.h device_if.h bus_if.h pci_if.h
CFLAGS += ${DEBUG_FLAGS}
sf.h:
Convert the VIA Rhine driver to newbus and set it up to be compiled as a module. Also modified the code to work on FreeBSD/alpha and added device vr0 to the alpha GENERIC config. While I was in the neighborhood, I noticed that I was still using #define NFPX 1 in all of the Makefiles that I'd copied from the fxp module. I don't really use #define Nfoo X so it didn't matter, but I decided to customize this correctly anyway.
1999-08-10 17:15:20 +00:00
echo "#define NSF 1" > sf.h
This commit adds device driver support for Adaptec Duralink PCI fast ethernet controllers based on the AIC-6915 "Starfire" controller chip. There are single port, dual port and quad port cards, plus one 100baseFX card. All are 64-bit PCI devices, except one single port model. The Starfire would be a very nice chip were it not for the fact that receive buffers have to be longword aligned. This requires buffer copying in order to achieve proper payload alignment on the alpha. Payload alignment is enforced on both the alpha and x86 platforms. The Starfire has several different DMA descriptor formats and transfer mechanisms. This driver uses frame descriptors for transmission which can address up to 14 packet fragments, and a single fragment descriptor for receive. It also uses the producer/consumer model and completion queues for both transmit and receive. The transmit ring has 128 descriptors and the receive ring has 256. This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus so that it can be compiled as a loadable kernel module. Support for BPF and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
bpf.h:
echo "#define NBPF 1" > bpf.h
opt_bdg.h:
touch opt_bdg.h
device_if.h: $S/kern/makedevops.pl $S/kern/device_if.m
perl $S/kern/makedevops.pl -h $S/kern/device_if.m
bus_if.h: $S/kern/makedevops.pl $S/kern/bus_if.m
perl $S/kern/makedevops.pl -h $S/kern/bus_if.m
pci_if.h: $S/kern/makedevops.pl $S/pci/pci_if.m
perl $S/kern/makedevops.pl -h $S/pci/pci_if.m
.include <bsd.kmod.mk>
Reference in New Issue Copy Permalink