d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4bd37f660a
freebsd-skq/sys/netipsec/ipsec6.h

83 lines
3.2 KiB
C
Raw Normal View History

"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* $FreeBSD$ */
/* $KAME: ipsec.h,v 1.44 2001/03/23 08:08:47 itojun Exp $ */
/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
2017-11-20 19:43:44 +00:00
* SPDX-License-Identifier: BSD-3-Clause
*
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* IPsec controller part.
*/
#ifndef _NETIPSEC_IPSEC6_H_
#define _NETIPSEC_IPSEC6_H_
#include <net/pfkeyv2.h>
#include <netipsec/keydb.h>
#ifdef _KERNEL
Migrate structs ahstat, espstat, ipcompstat, ipipstat, pfkeystat, ipsec4stat, ipsec6stat to PCPU counters.
2013-07-09 10:08:13 +00:00
#include <sys/counter.h>
VNET_PCPUSTAT_DECLARE(struct ipsecstat, ipsec6stat);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, ip6_esp_trans_deflev);
VNET_DECLARE(int, ip6_esp_net_deflev);
VNET_DECLARE(int, ip6_ah_trans_deflev);
VNET_DECLARE(int, ip6_ah_net_deflev);
VNET_DECLARE(int, ip6_ipsec_ecn);
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
Migrate structs ahstat, espstat, ipcompstat, ipipstat, pfkeystat, ipsec4stat, ipsec6stat to PCPU counters.
2013-07-09 10:08:13 +00:00
#define IPSEC6STAT_INC(name) \
VNET_PCPUSTAT_ADD(struct ipsecstat, ipsec6stat, name, 1)
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
#define V_ip6_esp_trans_deflev VNET(ip6_esp_trans_deflev)
#define V_ip6_esp_net_deflev VNET(ip6_esp_net_deflev)
#define V_ip6_ah_trans_deflev VNET(ip6_ah_trans_deflev)
#define V_ip6_ah_net_deflev VNET(ip6_ah_net_deflev)
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
2009-07-16 21:13:04 +00:00
#define V_ip6_ipsec_ecn VNET(ip6_ipsec_ecn)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct inpcb;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct secpolicy *ipsec6_checkpolicy(const struct mbuf *,
Fix the regression introduced in r275710. When a security policy should match TCP connection with specific ports, the SYN+ACK segment send by syncache_respond() is considered as forwarded packet, because at this moment TCP connection does not have PCB structure, and ip_output() is called without inpcb pointer. In this case SPIDX filled for SP lookup will not contain TCP ports and security policy will not be found. This can lead to unencrypted SYN+ACK on the wire. This patch restores the old behavior, when ports will not be filled only for forwarded packets. Reported by: Dewayne Geraghty <dewayne.geraghty at heuristicsystems.com.au> MFC after: 1 week
2017-08-21 13:52:21 +00:00
struct inpcb *, int *, int);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
void ipsec6_setsockaddrs(const struct mbuf *, union sockaddr_union *,
union sockaddr_union *);
int ipsec6_input(struct mbuf *, int, int);
int ipsec6_in_reject(const struct mbuf *, struct inpcb *);
int ipsec6_forward(struct mbuf *);
int ipsec6_pcbctl(struct inpcb *, struct sockopt *);
int ipsec6_output(struct mbuf *, struct inpcb *);
int ipsec6_capability(struct mbuf *, u_int);
int ipsec6_common_input_cb(struct mbuf *, struct secasvar *, int, int);
int ipsec6_process_packet(struct mbuf *, struct secpolicy *, struct inpcb *);
int ip6_ipsec_filtertunnel(struct mbuf *);
int ip6_ipsec_pcbctl(struct inpcb *, struct sockopt *);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif /*_KERNEL*/
#endif /*_NETIPSEC_IPSEC6_H_*/
Reference in New Issue Copy Permalink