1993-10-19 19:46:49 +00:00
|
|
|
/*
|
|
|
|
* Copyright 1992 by the University of Guelph
|
|
|
|
*
|
|
|
|
* Permission to use, copy and modify this
|
|
|
|
* software and its documentation for any purpose and without
|
|
|
|
* fee is hereby granted, provided that the above copyright
|
|
|
|
* notice appear in all copies and that both that copyright
|
|
|
|
* notice and this permission notice appear in supporting
|
|
|
|
* documentation.
|
|
|
|
* University of Guelph makes no representations about the suitability of
|
|
|
|
* this software for any purpose. It is provided "as is"
|
|
|
|
* without express or implied warranty.
|
1994-08-02 07:55:43 +00:00
|
|
|
*
|
|
|
|
* $Id$
|
1993-10-19 19:46:49 +00:00
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and
|
|
|
|
* the X386 port, courtesy of
|
|
|
|
* Rick Macklem, rick@snowhite.cis.uoguelph.ca
|
|
|
|
* Caveats: The driver currently uses spltty(), but doesn't use any
|
|
|
|
* generic tty code. It could use splmse() (that only masks off the
|
|
|
|
* bus mouse interrupt, but that would require hacking in i386/isa/icu.s.
|
|
|
|
* (This may be worth the effort, since the Logitech generates 30/60
|
|
|
|
* interrupts/sec continuously while it is open.)
|
|
|
|
* NB: The ATI has NOT been tested yet!
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Modification history:
|
|
|
|
*
|
|
|
|
* Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu)
|
|
|
|
* fixes to make it work with Microsoft InPort busmouse
|
|
|
|
*
|
|
|
|
* Jan, 1993 -- E. Stark (stark@cs.sunysb.edu)
|
|
|
|
* added patches for new "select" interface
|
|
|
|
*
|
|
|
|
* May 4, 1993 -- E. Stark (stark@cs.sunysb.edu)
|
|
|
|
* changed position of some spl()'s in mseread
|
|
|
|
*
|
|
|
|
* October 8, 1993 -- E. Stark (stark@cs.sunysb.edu)
|
|
|
|
* limit maximum negative x/y value to -127 to work around XFree problem
|
|
|
|
* that causes spurious button pushes.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "mse.h"
|
|
|
|
#if NMSE > 0
|
|
|
|
#include "param.h"
|
|
|
|
#include "proc.h"
|
|
|
|
#include "user.h"
|
|
|
|
#include "buf.h"
|
|
|
|
#include "systm.h"
|
|
|
|
#include "kernel.h"
|
|
|
|
#include "ioctl.h"
|
|
|
|
#include "tty.h"
|
|
|
|
#include "uio.h"
|
|
|
|
|
|
|
|
#include "i386/isa/isa_device.h"
|
|
|
|
#include "i386/isa/icu.h"
|
|
|
|
|
1993-11-25 01:38:01 +00:00
|
|
|
static int mseprobe(struct isa_device *);
|
|
|
|
static int mseattach(struct isa_device *);
|
|
|
|
void mseintr(int);
|
1993-10-19 19:46:49 +00:00
|
|
|
|
|
|
|
struct isa_driver msedriver = {
|
|
|
|
mseprobe, mseattach, "mse"
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Software control structure for mouse. The sc_enablemouse(),
|
|
|
|
* sc_disablemouse() and sc_getmouse() routines must be called spl'd().
|
|
|
|
*/
|
|
|
|
#define PROTOBYTES 5
|
|
|
|
struct mse_softc {
|
|
|
|
int sc_flags;
|
|
|
|
int sc_mousetype;
|
1994-05-25 09:21:21 +00:00
|
|
|
struct selinfo sc_selp;
|
1993-10-19 19:46:49 +00:00
|
|
|
u_int sc_port;
|
|
|
|
void (*sc_enablemouse)();
|
|
|
|
void (*sc_disablemouse)();
|
|
|
|
void (*sc_getmouse)();
|
|
|
|
int sc_deltax;
|
|
|
|
int sc_deltay;
|
|
|
|
int sc_obuttons;
|
|
|
|
int sc_buttons;
|
|
|
|
int sc_bytesread;
|
|
|
|
u_char sc_bytes[PROTOBYTES];
|
|
|
|
} mse_sc[NMSE];
|
|
|
|
|
|
|
|
/* Flags */
|
|
|
|
#define MSESC_OPEN 0x1
|
|
|
|
#define MSESC_WANT 0x2
|
|
|
|
|
|
|
|
/* and Mouse Types */
|
|
|
|
#define MSE_LOGITECH 0x1
|
|
|
|
#define MSE_ATIINPORT 0x2
|
|
|
|
|
|
|
|
#define MSE_PORTA 0
|
|
|
|
#define MSE_PORTB 1
|
|
|
|
#define MSE_PORTC 2
|
|
|
|
#define MSE_PORTD 3
|
|
|
|
|
|
|
|
#define MSE_UNIT(dev) (minor(dev) >> 1)
|
|
|
|
#define MSE_NBLOCKIO(dev) (minor(dev) & 0x1)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Logitech bus mouse definitions
|
|
|
|
*/
|
|
|
|
#define MSE_SETUP 0x91 /* What does this mean? */
|
|
|
|
#define MSE_HOLD 0x80
|
|
|
|
#define MSE_RXLOW 0x00
|
|
|
|
#define MSE_RXHIGH 0x20
|
|
|
|
#define MSE_RYLOW 0x40
|
|
|
|
#define MSE_RYHIGH 0x60
|
|
|
|
#define MSE_DISINTR 0x10
|
|
|
|
#define MSE_INTREN 0x00
|
|
|
|
|
|
|
|
static int mse_probelogi();
|
|
|
|
static void mse_enablelogi(), mse_disablelogi(), mse_getlogi();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ATI Inport mouse definitions
|
|
|
|
*/
|
|
|
|
#define MSE_INPORT_RESET 0x80
|
|
|
|
#define MSE_INPORT_STATUS 0x00
|
|
|
|
#define MSE_INPORT_DX 0x01
|
|
|
|
#define MSE_INPORT_DY 0x02
|
|
|
|
#define MSE_INPORT_MODE 0x07
|
|
|
|
#define MSE_INPORT_HOLD 0x20
|
|
|
|
#define MSE_INPORT_INTREN 0x09
|
|
|
|
|
|
|
|
static int mse_probeati();
|
|
|
|
static void mse_enableati(), mse_disableati(), mse_getati();
|
|
|
|
|
|
|
|
#define MSEPRI (PZERO + 3)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Table of mouse types.
|
|
|
|
* Keep the Logitech last, since I haven't figured out how to probe it
|
|
|
|
* properly yet. (Someday I'll have the documentation.)
|
|
|
|
*/
|
|
|
|
struct mse_types {
|
|
|
|
int m_type; /* Type of bus mouse */
|
|
|
|
int (*m_probe)(); /* Probe routine to test for it */
|
|
|
|
void (*m_enable)(); /* Start routine */
|
|
|
|
void (*m_disable)(); /* Disable interrupts routine */
|
|
|
|
void (*m_get)(); /* and get mouse status */
|
|
|
|
} mse_types[] = {
|
|
|
|
{ MSE_ATIINPORT, mse_probeati, mse_enableati, mse_disableati, mse_getati },
|
|
|
|
{ MSE_LOGITECH, mse_probelogi, mse_enablelogi, mse_disablelogi, mse_getlogi },
|
|
|
|
{ 0, },
|
|
|
|
};
|
|
|
|
|
1993-11-25 01:38:01 +00:00
|
|
|
int
|
1993-10-19 19:46:49 +00:00
|
|
|
mseprobe(idp)
|
|
|
|
register struct isa_device *idp;
|
|
|
|
{
|
|
|
|
register struct mse_softc *sc = &mse_sc[idp->id_unit];
|
|
|
|
register int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check for each mouse type in the table.
|
|
|
|
*/
|
|
|
|
i = 0;
|
|
|
|
while (mse_types[i].m_type) {
|
|
|
|
if ((*mse_types[i].m_probe)(idp)) {
|
|
|
|
sc->sc_mousetype = mse_types[i].m_type;
|
|
|
|
sc->sc_enablemouse = mse_types[i].m_enable;
|
|
|
|
sc->sc_disablemouse = mse_types[i].m_disable;
|
|
|
|
sc->sc_getmouse = mse_types[i].m_get;
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
1993-11-25 01:38:01 +00:00
|
|
|
int
|
1993-10-19 19:46:49 +00:00
|
|
|
mseattach(idp)
|
|
|
|
struct isa_device *idp;
|
|
|
|
{
|
|
|
|
struct mse_softc *sc = &mse_sc[idp->id_unit];
|
|
|
|
|
|
|
|
sc->sc_port = idp->id_iobase;
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Exclusive open the mouse, initialize it and enable interrupts.
|
|
|
|
*/
|
1993-11-25 01:38:01 +00:00
|
|
|
int
|
1993-10-19 19:46:49 +00:00
|
|
|
mseopen(dev, flag)
|
|
|
|
dev_t dev;
|
|
|
|
int flag;
|
|
|
|
{
|
|
|
|
register struct mse_softc *sc;
|
|
|
|
int s;
|
|
|
|
|
|
|
|
if (MSE_UNIT(dev) >= NMSE)
|
|
|
|
return (ENXIO);
|
|
|
|
sc = &mse_sc[MSE_UNIT(dev)];
|
|
|
|
if (sc->sc_flags & MSESC_OPEN)
|
|
|
|
return (EBUSY);
|
|
|
|
sc->sc_flags |= MSESC_OPEN;
|
|
|
|
sc->sc_obuttons = sc->sc_buttons = 0x7;
|
|
|
|
sc->sc_deltax = sc->sc_deltay = 0;
|
|
|
|
sc->sc_bytesread = PROTOBYTES;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize mouse interface and enable interrupts.
|
|
|
|
*/
|
|
|
|
s = spltty();
|
|
|
|
(*sc->sc_enablemouse)(sc->sc_port);
|
|
|
|
splx(s);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mseclose: just turn off mouse innterrupts.
|
|
|
|
*/
|
1993-11-25 01:38:01 +00:00
|
|
|
int
|
1993-10-19 19:46:49 +00:00
|
|
|
mseclose(dev, flag)
|
1993-11-25 01:38:01 +00:00
|
|
|
dev_t dev;
|
1993-10-19 19:46:49 +00:00
|
|
|
int flag;
|
|
|
|
{
|
|
|
|
struct mse_softc *sc = &mse_sc[MSE_UNIT(dev)];
|
|
|
|
int s;
|
|
|
|
|
|
|
|
s = spltty();
|
|
|
|
(*sc->sc_disablemouse)(sc->sc_port);
|
|
|
|
sc->sc_flags &= ~MSESC_OPEN;
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mseread: return mouse info using the MSC serial protocol, but without
|
|
|
|
* using bytes 4 and 5.
|
|
|
|
* (Yes this is cheesy, but it makes the X386 server happy, so...)
|
|
|
|
*/
|
1993-11-25 01:38:01 +00:00
|
|
|
int
|
1993-10-19 19:46:49 +00:00
|
|
|
mseread(dev, uio)
|
|
|
|
dev_t dev;
|
|
|
|
struct uio *uio;
|
|
|
|
{
|
|
|
|
register struct mse_softc *sc = &mse_sc[MSE_UNIT(dev)];
|
|
|
|
int xfer, s, error;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If there are no protocol bytes to be read, set up a new protocol
|
|
|
|
* packet.
|
|
|
|
*/
|
|
|
|
s = spltty(); /* XXX Should be its own spl, but where is imlXX() */
|
|
|
|
if (sc->sc_bytesread >= PROTOBYTES) {
|
|
|
|
while (sc->sc_deltax == 0 && sc->sc_deltay == 0 &&
|
|
|
|
(sc->sc_obuttons ^ sc->sc_buttons) == 0) {
|
|
|
|
if (MSE_NBLOCKIO(dev)) {
|
|
|
|
splx(s);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
sc->sc_flags |= MSESC_WANT;
|
|
|
|
if (error = tsleep((caddr_t)sc, MSEPRI | PCATCH,
|
|
|
|
"mseread", 0)) {
|
|
|
|
splx(s);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Generate protocol bytes.
|
|
|
|
* For some reason X386 expects 5 bytes but never uses
|
|
|
|
* the fourth or fifth?
|
|
|
|
*/
|
|
|
|
sc->sc_bytes[0] = 0x80 | (sc->sc_buttons & ~0xf8);
|
|
|
|
if (sc->sc_deltax > 127)
|
|
|
|
sc->sc_deltax = 127;
|
|
|
|
if (sc->sc_deltax < -127)
|
|
|
|
sc->sc_deltax = -127;
|
|
|
|
sc->sc_deltay = -sc->sc_deltay; /* Otherwise mousey goes wrong way */
|
|
|
|
if (sc->sc_deltay > 127)
|
|
|
|
sc->sc_deltay = 127;
|
|
|
|
if (sc->sc_deltay < -127)
|
|
|
|
sc->sc_deltay = -127;
|
|
|
|
sc->sc_bytes[1] = sc->sc_deltax;
|
|
|
|
sc->sc_bytes[2] = sc->sc_deltay;
|
|
|
|
sc->sc_bytes[3] = sc->sc_bytes[4] = 0;
|
|
|
|
sc->sc_obuttons = sc->sc_buttons;
|
|
|
|
sc->sc_deltax = sc->sc_deltay = 0;
|
|
|
|
sc->sc_bytesread = 0;
|
|
|
|
}
|
|
|
|
splx(s);
|
1994-05-26 13:30:20 +00:00
|
|
|
xfer = min(uio->uio_resid, PROTOBYTES - sc->sc_bytesread);
|
1993-10-19 19:46:49 +00:00
|
|
|
if (error = uiomove(&sc->sc_bytes[sc->sc_bytesread], xfer, uio))
|
|
|
|
return (error);
|
|
|
|
sc->sc_bytesread += xfer;
|
|
|
|
return(0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mseselect: check for mouse input to be processed.
|
|
|
|
*/
|
1993-11-25 01:38:01 +00:00
|
|
|
int
|
1993-10-19 19:46:49 +00:00
|
|
|
mseselect(dev, rw, p)
|
|
|
|
dev_t dev;
|
|
|
|
int rw;
|
|
|
|
struct proc *p;
|
|
|
|
{
|
|
|
|
register struct mse_softc *sc = &mse_sc[MSE_UNIT(dev)];
|
|
|
|
int s;
|
|
|
|
|
|
|
|
s = spltty();
|
|
|
|
if (sc->sc_bytesread != PROTOBYTES || sc->sc_deltax != 0 ||
|
|
|
|
sc->sc_deltay != 0 || (sc->sc_obuttons ^ sc->sc_buttons) != 0) {
|
|
|
|
splx(s);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Since this is an exclusive open device, any previous proc.
|
|
|
|
* pointer is trash now, so we can just assign it.
|
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
selrecord(p, &sc->sc_selp);
|
1993-10-19 19:46:49 +00:00
|
|
|
splx(s);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mseintr: update mouse status. sc_deltax and sc_deltay are accumulative.
|
|
|
|
*/
|
1993-11-25 01:38:01 +00:00
|
|
|
void
|
1993-10-19 19:46:49 +00:00
|
|
|
mseintr(unit)
|
|
|
|
int unit;
|
|
|
|
{
|
|
|
|
register struct mse_softc *sc = &mse_sc[unit];
|
|
|
|
pid_t p;
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
static int mse_intrcnt = 0;
|
|
|
|
if((mse_intrcnt++ % 10000) == 0)
|
|
|
|
printf("mseintr\n");
|
|
|
|
#endif /* DEBUG */
|
|
|
|
if ((sc->sc_flags & MSESC_OPEN) == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
(*sc->sc_getmouse)(sc->sc_port, &sc->sc_deltax, &sc->sc_deltay, &sc->sc_buttons);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If mouse state has changed, wake up anyone wanting to know.
|
|
|
|
*/
|
|
|
|
if (sc->sc_deltax != 0 || sc->sc_deltay != 0 ||
|
|
|
|
(sc->sc_obuttons ^ sc->sc_buttons) != 0) {
|
|
|
|
if (sc->sc_flags & MSESC_WANT) {
|
|
|
|
sc->sc_flags &= ~MSESC_WANT;
|
|
|
|
wakeup((caddr_t)sc);
|
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
selwakeup(&sc->sc_selp);
|
1993-10-19 19:46:49 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Routines for the Logitech mouse.
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Test for a Logitech bus mouse and return 1 if it is.
|
|
|
|
* (until I know how to use the signature port properly, just disable
|
|
|
|
* interrupts and return 1)
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mse_probelogi(idp)
|
|
|
|
register struct isa_device *idp;
|
|
|
|
{
|
|
|
|
|
|
|
|
outb(idp->id_iobase + MSE_PORTB, 0x55);
|
|
|
|
if (inb(idp->id_iobase + MSE_PORTB) == 0x55) {
|
|
|
|
outb(idp->id_iobase + MSE_PORTB, 0xaa);
|
|
|
|
if (inb(idp->id_iobase + MSE_PORTB) == 0xaa)
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize Logitech mouse and enable interrupts.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mse_enablelogi(port)
|
|
|
|
register u_int port;
|
|
|
|
{
|
|
|
|
int dx, dy, but;
|
|
|
|
|
|
|
|
outb(port + MSE_PORTD, MSE_SETUP);
|
|
|
|
mse_getlogi(port, &dx, &dy, &but);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable interrupts for Logitech mouse.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mse_disablelogi(port)
|
|
|
|
register u_int port;
|
|
|
|
{
|
|
|
|
|
|
|
|
outb(port + MSE_PORTC, MSE_DISINTR);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the current dx, dy and button up/down state.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mse_getlogi(port, dx, dy, but)
|
|
|
|
register u_int port;
|
|
|
|
int *dx;
|
|
|
|
int *dy;
|
|
|
|
int *but;
|
|
|
|
{
|
|
|
|
register char x, y;
|
|
|
|
|
|
|
|
outb(port + MSE_PORTC, MSE_HOLD | MSE_RXLOW);
|
|
|
|
x = inb(port + MSE_PORTA);
|
|
|
|
*but = (x >> 5) & 0x7;
|
|
|
|
x &= 0xf;
|
|
|
|
outb(port + MSE_PORTC, MSE_HOLD | MSE_RXHIGH);
|
|
|
|
x |= (inb(port + MSE_PORTA) << 4);
|
|
|
|
outb(port + MSE_PORTC, MSE_HOLD | MSE_RYLOW);
|
|
|
|
y = (inb(port + MSE_PORTA) & 0xf);
|
|
|
|
outb(port + MSE_PORTC, MSE_HOLD | MSE_RYHIGH);
|
|
|
|
y |= (inb(port + MSE_PORTA) << 4);
|
|
|
|
*dx += x;
|
|
|
|
*dy += y;
|
|
|
|
outb(port + MSE_PORTC, MSE_INTREN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Routines for the ATI Inport bus mouse.
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Test for a ATI Inport bus mouse and return 1 if it is.
|
|
|
|
* (do not enable interrupts)
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mse_probeati(idp)
|
|
|
|
register struct isa_device *idp;
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 2; i++)
|
|
|
|
if (inb(idp->id_iobase + MSE_PORTC) == 0xde)
|
|
|
|
return (1);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize ATI Inport mouse and enable interrupts.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mse_enableati(port)
|
|
|
|
register u_int port;
|
|
|
|
{
|
|
|
|
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_RESET);
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_MODE);
|
|
|
|
outb(port + MSE_PORTB, MSE_INPORT_INTREN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable interrupts for ATI Inport mouse.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mse_disableati(port)
|
|
|
|
register u_int port;
|
|
|
|
{
|
|
|
|
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_MODE);
|
|
|
|
outb(port + MSE_PORTB, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get current dx, dy and up/down button state.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mse_getati(port, dx, dy, but)
|
|
|
|
register u_int port;
|
|
|
|
int *dx;
|
|
|
|
int *dy;
|
|
|
|
int *but;
|
|
|
|
{
|
|
|
|
register char byte;
|
|
|
|
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_MODE);
|
|
|
|
outb(port + MSE_PORTB, MSE_INPORT_HOLD);
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_STATUS);
|
|
|
|
*but = ~(inb(port + MSE_PORTB) & 0x7);
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_DX);
|
|
|
|
byte = inb(port + MSE_PORTB);
|
|
|
|
*dx += byte;
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_DY);
|
|
|
|
byte = inb(port + MSE_PORTB);
|
|
|
|
*dy += byte;
|
|
|
|
outb(port + MSE_PORTA, MSE_INPORT_MODE);
|
|
|
|
outb(port + MSE_PORTB, MSE_INPORT_INTREN);
|
|
|
|
}
|
|
|
|
#endif /* NMSE */
|