d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4ca8c1efe4
freebsd-skq/sys/conf/options

1028 lines
26 KiB
Plaintext
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
#
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
# On the handling of kernel options
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
#
Note that options should be listed in NOTES, not LINT, although LINT is generated from NOTES. Also correct a bogus path; <machine>/conf/options.<machine> doesn't exist.
2001-07-08 01:02:37 +00:00
# All kernel options should be listed in NOTES, with suitable
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
# descriptions. Negative options (options that make some code not
Fill paragraphs after previous commit.
2001-07-08 01:04:10 +00:00
# compile) should be commented out; LINT (generated from NOTES) should
# compile as much code as possible. Try to structure option-using
# code so that a single option only switch code on, or only switch
# code off, to make it possible to have a full compile-test. If
# necessary, you can check for COMPILING_LINT to get maximum code
# coverage.
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
#
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
# All new options shall also be listed in either "conf/options" or
Fill paragraphs after previous commit.
2001-07-08 01:04:10 +00:00
# "conf/options.<machine>". Options that affect a single source-file
# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
# that affect multiple files should either go in "opt_global.h" if
# this is a kernel-wide option (used just about everywhere), or in
spelling nit
2006-12-18 05:42:33 +00:00
# "opt_<option-name-in-lower-case>.h" if it affects only some files.
Fill paragraphs after previous commit.
2001-07-08 01:04:10 +00:00
# Note that the effect of listing only an option without a
# header-file-name in conf/options (and cousins) is that the last
# convention is followed.
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
#
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
# This handling scheme is not yet fully implemented.
#
#
# Format of this file:
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
# Option name filename
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
#
# If filename is missing, the default is
# opt_<name-of-option-in-lower-case>.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
Give in to the oblique nagging and move AAC and AHC/AHD comments out of /sys/conf/options and into /sys/conf/NOTES
2004-03-31 08:22:09 +00:00
AAC_DEBUG opt_aac.h
Driver 'aacraid' added. Supports Adaptec by PMC RAID controller families Series 6, 7, 8 and upcoming products. Older Adaptec RAID controller families are supported by the 'aac' driver. Approved by: scottl (mentor)
2013-05-24 09:22:43 +00:00
AACRAID_DEBUG opt_aacraid.h
Give in to the oblique nagging and move AAC and AHC/AHD comments out of /sys/conf/options and into /sys/conf/NOTES
2004-03-31 08:22:09 +00:00
AHC_ALLOW_MEMIO opt_aic7xxx.h
AHC_TMODE_ENABLE opt_aic7xxx.h
AHC_DUMP_EEPROM opt_aic7xxx.h
AHC_DEBUG opt_aic7xxx.h
AHC_DEBUG_OPTS opt_aic7xxx.h
Consistently use <TAB> instead of spaces as option name and file separator.
2009-02-06 10:30:46 +00:00
AHC_REG_PRETTY_PRINT opt_aic7xxx.h
Give in to the oblique nagging and move AAC and AHC/AHD comments out of /sys/conf/options and into /sys/conf/NOTES
2004-03-31 08:22:09 +00:00
AHD_DEBUG opt_aic79xx.h
AHD_DEBUG_OPTS opt_aic79xx.h
AHD_TMODE_ENABLE opt_aic79xx.h
AHD_REG_PRETTY_PRINT opt_aic79xx.h
ADW_ALLOW_MEMIO opt_adw.h
Add ADW_ALLOW_MEMIO and DPT_ALLOW_MEMIO. Until our configuration framework properly detects broken PCI-PCI bridges, users will have to manually enable memory mapped I/O for these drivers. <sigh>
1998-10-07 03:30:55 +00:00
Moved comments on 3ware 9000 series RAID controller driver options from options to NOTES.
2004-03-31 18:46:13 +00:00
TWA_DEBUG opt_twa.h
Added options for 3ware 9000 series RAID controller driver (twa).
2004-03-30 18:53:18 +00:00
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
# Debugging options.
Follow up to r225203 refining break-to-debugger run-time configuration improvements: (1) Implement new model in previously missed at91 UART driver (2) Move BREAK_TO_DEBUGGER and ALT_BREAK_TO_DEBUGGER from opt_comconsole.h to opt_kdb.h (spotted by np) (3) Garbage collect now-unused opt_comconsole.h MFC after: 3 weeks Approved by: re (bz)
2011-08-27 14:24:27 +00:00
ALT_BREAK_TO_DEBUGGER opt_kdb.h
BREAK_TO_DEBUGGER opt_kdb.h
Add BUF_TRACKING and FULL_BUF_TRACKING buffer debugging Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code. This can be handy in tracking down what code touched hung bios and bufs last. The full history is especially useful, but adds enough bloat that it shouldn't be enabled in release builds. Function names (or arbitrary string constants) are tracked in a fixed-size ring in bufs. Bios gain a pointer to the upper buf for tracking. SCSI CCBs gain a pointer to the upper bio for tracking. Reviewed by: markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D8366
2016-10-31 23:09:52 +00:00
BUF_TRACKING opt_global.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
DDB
Bufferize the output for DDB printouts. In order to CATER this, DDB buffered output can be choosen at compile time through the option DDB_BUFR_SIZE=nbytes where nbytes choose the size of the buffer (suggested size is 128 bytes), which should be manually specified in any interested config file. Sponsored by: Nokia
2008-08-18 16:48:09 +00:00
DDB_BUFR_SIZE opt_ddb.h
Allow DDB_CAPTURE_DEFAULTBUFSIZE and DDB_CAPTURE_MAXBUFSIZE to be overridden at compile-time using kernel options of the same names. Rather than doing a compile-time CTASSERT of buffer sizes being even multiples of block sizes, just adjust them at boottime, as the failure mode is more user-friendly. MFC after: 2 months PR: 119993 Suggested by: Scot Hetzel <swhetzel at gmail dot com>
2008-01-26 22:32:23 +00:00
DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
Add two kernel options: - KDTRACE_HOOKS for the shim layer of hooks which separate BSD licensed code from CDDL code. - DDB_CTF for the code that parses the CTF (compact C type format) data for use by the DTrace Function Boundary Trace provider and (possibly) ddb if we plan to do that.
2008-05-18 19:28:51 +00:00
DDB_CTF opt_ddb.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
DDB_NUMSYM opt_ddb.h
Add BUF_TRACKING and FULL_BUF_TRACKING buffer debugging Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code. This can be handy in tracking down what code touched hung bios and bufs last. The full history is especially useful, but adds enough bloat that it shouldn't be enabled in release builds. Function names (or arbitrary string constants) are tracked in a fixed-size ring in bufs. Bios gain a pointer to the upper buf for tracking. SCSI CCBs gain a pointer to the upper bio for tracking. Reviewed by: markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D8366
2016-10-31 23:09:52 +00:00
FULL_BUF_TRACKING opt_global.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
GDB
KDB opt_global.h
KDB_TRACE opt_kdb.h
KDB_UNATTENDED opt_kdb.h
Add KLD_DEBUG option.
2011-11-06 08:10:41 +00:00
KLD_DEBUG opt_kld.h
Move the 'debug' sysctl tree under options SYSCTL_DEBUG. It generates an inordinate amount of synchronous console output that is fairly undesirable on slower serial console. It's easily hit by accident when frobbing other sysctls late at night.
2004-10-27 19:26:01 +00:00
SYSCTL_DEBUG opt_sysctl.h
Implement generic support for early printf. Thought I can't find the paper trail now, this patch is similar to one posted for one of the preliminary versions of a new armv6 port. I took them and made them more generic. Option not enabled by default since each board/port has to provide its own eputc, and possibly do other things as well...
2014-01-22 21:20:08 +00:00
EARLY_PRINTF opt_global.h
Small textdump enhancements. Allow textdumps to be called explicitly from DDB. If "dump" is called in DDB and textdumps are enabled then abort the dump and tell the user to turn off textdumps. Add options TEXTDUMP_PREFERRED to turn textdumps on by default. Add options TEXTDUMP_VERBOSE to be a bit more verbose while textdumping. Reviewed by: rwatson MFC after: 2 weeks
2012-11-01 04:07:08 +00:00
TEXTDUMP_PREFERRED opt_ddb.h
TEXTDUMP_VERBOSE opt_ddb.h
Add the NUM_CORE_FILES kernel config option which specifies the limit for the number of core files allowed by a particular process when using the %I core file name pattern. Sanity check at compile time to ensure the value is within the valid range of 0-10. Reviewed by: jtl, sjg Approved by: sjg (mentor) Sponsored by: Juniper Networks, Inc. Differential Revision: https://reviews.freebsd.org/D6812
2016-07-27 03:21:02 +00:00
NUM_CORE_FILES opt_global.h
Connect kern_tslog.c to the build and add TSLOG / TSLOGSIZE kernel options. These are intended for debugging purposes and should not be added to "generic" kernel configurations since they result in a nontrivial amount of memory being set aside for this purpose, can break if kernel modules are unloaded, and can potentially leak a dangerous amount of information about timestamps used as a source of kernel entropy.
2017-12-31 09:21:34 +00:00
TSLOG opt_global.h
TSLOGSIZE opt_global.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
Sorted options.
1996-12-23 18:42:02 +00:00
# Miscellaneous options.
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
ALQ
MFP4 (driver change only): Change 231100 by brooks@brooks_zenith on 2013/07/12 21:01:31 Add a new option ALTERA_SDCARD_FAST_SIM which checks immediatly for success of I/O operations rather than queuing a task. MFC after: 3 days Sponsored by: DARPA/AFRL
2013-10-18 15:27:11 +00:00
ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h
MFP4: 1136252 Add an option ATSE_CFI_HACK to allow memory mapped CFI devices to have their address range allocated sharable so that atse(4) can find it's Ethernet address in the expected location. We intend to remove this hack once the BERI platform has a loader.
2013-10-18 20:52:42 +00:00
ATSE_CFI_HACK opt_cfi.h
Add 'options AUDIT' and associate various .c files with the AUDIT option. We always build audit_syscalls.c so that the system call stubs can return ENOSYS rather than the system call code generating SIGSYS for the system calls. We are not yet ready to add AUDIT to LINT, as the prototypes for system call arguments won't be there until after the system calls for audit are added. Much work from: wsalamon Obtained from: TrustedBSD Project
2006-02-01 21:00:16 +00:00
AUDIT opt_global.h
MFP4 change 210763 Allow boothowto and bootverbose to be set via kernel options, which is useful on architectures that are unable to rely on a boot loader to pass configuration variables to the kernel. Submitted by: rwatson
2013-04-03 22:24:36 +00:00
BOOTHOWTO opt_global.h
BOOTVERBOSE opt_global.h
- Make callout(9) tickless, relying on eventtimers(4) as backend for precise time event generation. This greatly improves granularity of callouts which are not anymore constrained to wait next tick to be scheduled. - Extend the callout KPI introducing a set of callout_reset_sbt* functions, which take a sbintime_t as timeout argument. The new KPI also offers a way for consumers to specify precision tolerance they allow, so that callout can coalesce events and reduce number of interrupts as well as potentially avoid scheduling a SWI thread. - Introduce support for dispatching callouts directly from hardware interrupt context, specifying an additional flag. This feature should be used carefully, as long as interrupt context has some limitations (e.g. no sleeping locks can be held). - Enhance mechanisms to gather informations about callwheel, introducing a new sysctl to obtain stats. This change breaks the KBI. struct callout fields has been changed, in particular 'int ticks' (4 bytes) has been replaced with 'sbintime_t' (8 bytes) and another 'sbintime_t' field was added for precision. Together with: mav Reviewed by: attilio, bde, luigi, phk Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo (amd64, sparc64), marius (sparc64), ian (arm), markj (amd64), mav, Fabian Keil
2013-03-04 11:09:56 +00:00
CALLOUT_PROFILING
Define the CAPABILITIES kernel option. This option will enable Capsicum capabilities, which provide a fine-grained mask on operations that can be performed on file descriptors. Approved by: mentor (rwatson), re (Capsicum blanket ok) Sponsored by: Google Inc
2011-07-02 15:41:22 +00:00
CAPABILITIES opt_capsicum.h
We may split today's CAPABILITIES into CAPABILITY_MODE (which has to do with global namespaces) and CAPABILITIES (which has to do with constraining file descriptors). Just in case, and because it's a better name anyway, let's move CAPABILITIES out of the way. Also, change opt_capabilities.h to opt_capsicum.h; for now, this will only hold CAPABILITY_MODE, but it will probably also hold the new CAPABILITIES (implying constrained file descriptors) in the future. Approved by: rwatson Sponsored by: Google UK Ltd
2011-06-29 13:03:05 +00:00
CAPABILITY_MODE opt_capsicum.h
Move most of the contents of opt_compat.h to opt_global.h. opt_compat.h is mentioned in nearly 180 files. In-progress network driver compabibility improvements may add over 100 more so this is closer to "just about everywhere" than "only some files" per the guidance in sys/conf/options. Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h is created on all architectures. Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the set of compiled files. Reviewed by: kib, cem, jhb, jtl Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D14941
2018-04-06 17:35:35 +00:00
COMPAT_43 opt_global.h
COMPAT_43TTY opt_global.h
COMPAT_FREEBSD4 opt_global.h
COMPAT_FREEBSD5 opt_global.h
COMPAT_FREEBSD6 opt_global.h
COMPAT_FREEBSD7 opt_global.h
COMPAT_FREEBSD9 opt_global.h
COMPAT_FREEBSD10 opt_global.h
COMPAT_FREEBSD11 opt_global.h
Add CPU independent code for running 32-bits CloudABI executables. Essentially, this is a literal copy of the code in sys/compat/cloudabi64, except that it now makes use of 32-bits datatypes and limits. In sys/conf/files, we now need to take care to build the code in sys/compat/cloudabi if either COMPAT_CLOUDABI32 or COMPAT_CLOUDABI64 is turned on. This change does not yet include any of the CPU dependent bits. Right now I have implementations for running i386 binaries both on i386 and x86-64, which I will send out for review separately.
2016-08-21 16:01:30 +00:00
COMPAT_CLOUDABI32 opt_dontuse.h
Import the CloudABI datatypes and create a system call table. CloudABI is a pure capability-based runtime environment for UNIX. It works similar to Capsicum, except that processes already run in capabilities mode on startup. All functionality that conflicts with this model has been omitted, making it a compact binary interface that can be supported by other operating systems without too much effort. CloudABI is 'secure by default'; the idea is that it should be safe to run arbitrary third-party binaries without requiring any explicit hardware virtualization (Bhyve) or namespace virtualization (Jails). The rights of an application are purely determined by the set of file descriptors that you grant it on startup. The datatypes and constants used by CloudABI's C library (cloudlibc) are defined in separate files called syscalldefs_mi.h (pointer size independent) and syscalldefs_md.h (pointer size dependent). We import these files in sys/contrib/cloudabi and wrap around them in cloudabi*_syscalldefs.h. We then add stubs for all of the system calls in sys/compat/cloudabi or sys/compat/cloudabi64, depending on whether the system call depends on the pointer size. We only have nine system calls that depend on the pointer size. If we ever want to support 32-bit binaries, we can simply add sys/compat/cloudabi32 and implement these nine system calls again. The next step is to send in code reviews for the individual system call implementations, but also add a sysentvec, to allow CloudABI executabled to be started through execve(). More information about CloudABI: - GitHub: https://github.com/NuxiNL/cloudlibc - Talk at BSDCan: https://www.youtube.com/watch?v=SVdF84x1EdA Differential Revision: https://reviews.freebsd.org/D2848 Reviewed by: emaste, brooks Obtained from: https://github.com/NuxiNL/freebsd
2015-07-09 07:20:15 +00:00
COMPAT_CLOUDABI64 opt_dontuse.h
Move most of the contents of opt_compat.h to opt_global.h. opt_compat.h is mentioned in nearly 180 files. In-progress network driver compabibility improvements may add over 100 more so this is closer to "just about everywhere" than "only some files" per the guidance in sys/conf/options. Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h is created on all architectures. Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the set of compiled files. Reviewed by: kib, cem, jhb, jtl Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D14941
2018-04-06 17:35:35 +00:00
COMPAT_LINUXKPI opt_dontuse.h
Add an unused _COMPAT_LINUX32 option to ensure opt_compat.h exists on platforms without COMPAT_LINUX32. Reported by: kib
2018-04-06 19:11:22 +00:00
_COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists
Make LINT compile.
2000-09-16 18:55:05 +00:00
COMPILING_LINT opt_global.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
CY_PCI_FASTINTR
Introduce the new kernel thread called "deadlock resolver". While the name is pretentious, a good explanation of its targets is reported in this 17 months old presentation e-mail: http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html In order to implement it, the sq_type in sleepqueues is mandatory and not only compiled along with INVARIANTS option. Additively, a new sleepqueue function, sleepq_type() is added, returning the type of the sleepqueue linked to a wchan. Three new sysctls are added in order to configure the thread: debug.deadlkres.slptime_threshold debug.deadlkres.blktime_threshold debug.deadlkres.sleepfreq rappresenting the thresholds for sleep and block time that will lead to a deadlock matching (when exceeded), while the sleepfreq rappresents the number of seconds between 2 consecutive thread runnings. In order to enable the deadlock resolver thread recompile your kernel with the option DEADLKRES. Reviewed by: jeff Tested by: pho, Giovanni Trematerra Sponsored by: Nokia Incorporated, Sandvine Incorporated MFC after: 2 weeks
2010-01-09 01:46:38 +00:00
DEADLKRES opt_watchdog.h
Add clock framework, a first part of new 'extended resources' family of support frameworks(i.e. reset/regulators/phy/tsensors/fuses...). The clock framework significantly simplifies handling of complex clock structures found in modern SoCs. It provides the unified consumers interface, holds and manages actual clock topology, frequency and gating. It's tested on three different ARM boards (Nvidia Tegra TK1, Inforce 6410 and Odroid XU2) and on one MIPS board (Creator Ci20) by kan@. The framework is still far from perfect and probably doesn't have stable interface yet, but we want to start testing it on more real boards and different architectures. Reviewed by: ian, kan (earlier version)
2016-01-24 11:00:38 +00:00
EXT_RESOURCES opt_global.h
Remove all redundant option file names that don't hurt readability.
2005-12-12 10:15:11 +00:00
DIRECTIO
Add an entry for filemon.
2013-07-03 20:22:12 +00:00
FILEMON opt_dontuse.h
Core structure and functions to support a feed-forward clock within the kernel. Implement ffcounter, a monotonically increasing cumulative counter on top of the active timecounter. Provide low-level functions to read the ffcounter and convert it to absolute time or a time interval in seconds using the current ffclock estimates, which track the drift of the oscillator. Add a ring of fftimehands to track passing of time on each kernel tick and pick up updates of ffclock estimates. Committed on behalf of Julien Ridoux and Darryl Veitch from the University of Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward Clock Synchronization Algorithms" project. For more information, see http://www.synclab.org/radclock/ Submitted by: Julien Ridoux (jridoux at unimelb edu au)
2011-11-19 14:10:16 +00:00
FFCLOCK
Turn PREEMPTION into a kernel option. Make sure that it's defined if FULL_PREEMPTION is defined. Add a runtime warning to ULE if PREEMPTION is enabled (code inspired by the PREEMPTION warning in kern_switch.c). This is a possible MT5 candidate.
2004-09-02 18:59:15 +00:00
FULL_PREEMPTION opt_sched.h
Reimplement support for userland core dump compression using a new interface in kern_gzio.c. The old gzio interface was somewhat inflexible and has not worked properly since r272535: currently, the gzio functions are called with a range lock held on the output vnode, but kern_gzio.c does not pass the IO_RANGELOCKED flag to vn_rdwr() calls, resulting in deadlock when vn_rdwr() attempts to reacquire the range lock. Moreover, the new gzio interface can be used to implement kernel core compression. This change also modifies the kernel configuration options needed to enable userland core dump compression support: gzio is now an option rather than a device, and the COMPRESS_USER_CORES option is removed. Core dump compression is enabled using the kern.compress_user_cores sysctl/tunable. Differential Revision: https://reviews.freebsd.org/D1832 Reviewed by: rpaulo Discussed with: kib
2015-03-09 03:50:53 +00:00
GZIO opt_gzio.h
imagact_binmisc builds for all supported architectures, so enable it for all. Any bugs in execution will be dealt with as they crop up. MFC after: 3 weeks Relnotes: Yes
2014-05-22 05:04:40 +00:00
IMAGACT_BINMISC opt_dontuse.h
Add IPI support for preempting a thread on another CPU. MFC after: 3 weeks
2005-06-09 18:23:54 +00:00
IPI_PREEMPTION opt_sched.h
Add Geom Based Disk Encryption to the tree. This is an encryption module designed for to secure denial of access to the contents of "cold disks" with or without destruction activation. Major features: * Based on AES, MD5 and ARC4 algorithms. * Four cryptographic barriers: 1) Pass-phrase encrypts the master key. 2) Pass-phrase + Lock data locates master key. 3) 128 bit key derived from 2048 bit master key protects sector key. 3) 128 bit random single-use sector keys protect data payload. * Up to four different changeable pass-phrases. * Blackening feature for provable destruction of master key material. * Isotropic disk contents offers no information about sector contents. * Configurable destination sector range allows steganographic deployment. This commit adds the kernel part, separate commits will follow for the userland utility and documentation. This software was developed for the FreeBSD Project by Poul-Henning Kamp and NAI Labs, the Security Research Division of Network Associates, Inc. under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS research program. Many thanks to Robert Watson, CBOSS Principal Investigator for making this possible. Sponsored by: DARPA & NAI Labs.
2002-10-19 17:02:17 +00:00
GEOM_BDE opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_BSD opt_geom.h
Added the GEOM_CACHE option. Reminded by: pjd
2006-10-06 10:43:42 +00:00
GEOM_CACHE opt_geom.h
Allow geom_concat and geom_gate to be compiled in kernel.
2004-05-03 21:18:56 +00:00
GEOM_CONCAT opt_geom.h
Connect GEOM_ELI class to the build. MFC after: 1 week
2005-07-27 21:47:55 +00:00
GEOM_ELI opt_geom.h
Add "GEOM_FOX", a class which detects and selects between multiple redundant paths to the same device. This class reacts to a label in the first sector of the device, which is created the following way: # "0123456789abcdef012345..." # "<----magic-----><-id-...> echo "GEOM::FOX someid" | dd of=/dev/da0 conv=sync NB: Since the fact that multiple disk devices are in fact the same device is not known to GEOM, the geom taste/spoil process cannot fully catch all corner cases and this module can therefore be confused if you do the right wrong things. NB: The disk level drivers need to do the right thing for this to be useful, and that is not by definition currently the case.
2003-06-18 09:29:28 +00:00
GEOM_FOX opt_geom.h
Allow geom_concat and geom_gate to be compiled in kernel.
2004-05-03 21:18:56 +00:00
GEOM_GATE opt_geom.h
Hook up gjournal bits to the build. Sponsored by: home.pl
2006-10-31 22:22:30 +00:00
GEOM_JOURNAL opt_geom.h
Introduce GEOM_LABEL class. This class is used for detecting volume labels on file systems: UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660. It also provide native labelization (there is no need for file system). g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow. g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found where volume labels are stored and I use those offsets here, but with this class it should be easy to do it as it should be done by someone who know how. Implementing volume labels detection for other file systems also should be trivial. New providers are created in those directories: /dev/ufs/ (UFS1, UFS2) /dev/msdosfs/ (FAT12, FAT16, FAT32) /dev/iso9660/ (ISO9660) /dev/label/ (native labels, configured with glabel(8)) Manual page cleanups and some comments inside were submitted by Simon L. Nielsen, who was, as always, very helpful. Thanks!
2004-07-02 19:40:36 +00:00
GEOM_LABEL opt_geom.h
An all-or-nothing approach to labels isn't flexible enough. Embedded systems need fine-grained control over what's in and what's out. That's ideal. For now, separate GPT labels from the rest and allow g_label to be built with just GPT labels. Obtained from: Juniper Networks, Inc.
2014-04-06 02:44:37 +00:00
GEOM_LABEL_GPT opt_geom.h
Rename geom_lvm(4) to geom_linux_lvm(4). Requested by: des, phk
2008-02-20 07:50:13 +00:00
GEOM_LINUX_LVM opt_geom.h
Add makefile to build geom_map kld. Document some GEOM_* options in NOTES and geom(4).
2015-06-08 13:23:56 +00:00
GEOM_MAP opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_MBR opt_geom.h
Connect GEOM_MIRROR class to the build.
2004-07-30 23:18:53 +00:00
GEOM_MIRROR opt_geom.h
Fix kernel build with "options GEOM_MOUNTVER". Previously it was only working as a kernel module. PR: 205026 Submitted by: Eugene Grosbein <eugen@grosbein.net> MFC after: 1 month Sponsored by: The FreeBSD Foundation
2015-12-14 13:51:14 +00:00
GEOM_MOUNTVER opt_geom.h
Add GEOM_MULTIPATH so LINT will build. Pointy hat to: mjacob
2007-02-27 12:05:25 +00:00
GEOM_MULTIPATH opt_geom.h
- Connect geom(8) and its libraries to the build. - Connect geom_stripe and geom_nop modules to the build. - Connect STRIPE and NOP classes to the LINT build. - Disconnect gconcat(8) from the build. Supported by: Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:37:13 +00:00
GEOM_NOP opt_geom.h
Evolve the ctlreq interface added to geom_gpt into a generic partitioning class that supports multiple schemes. Current schemes supported are APM (Apple Partition Map) and GPT. Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM and GEOM_PART_GPT (resp). The ctlreq interface supports verbs to create and destroy partitioning schemes on a disk; to add, delete and modify partitions; and to commit or undo changes made.
2007-02-07 18:55:31 +00:00
GEOM_PART_APM opt_geom.h
Add a BSD disklabel backend to g_part: o Disklabels can have between 8 and 20 partitions (inclusive). o No device special file is created for the raw partition. o Switch ia64 to use this backend. o No support for boot code yet.
2007-12-06 02:32:42 +00:00
GEOM_PART_BSD opt_geom.h
Add disklabel64 support MFC after: 2 weeks
2014-06-11 10:48:11 +00:00
GEOM_PART_BSD64 opt_geom.h
Add option GEOM_PART_EBR by default on amd64 and i386.
2009-02-10 00:08:39 +00:00
GEOM_PART_EBR opt_geom.h
Add a compat option to the EBR scheme that controls the naming of the partitions (GEOM_PART_EBR_COMPAT). When compatibility is enabled, changes to the partitioning are disallowed. Remove the device name aliasing added previously to provide backward compatibility, but which in practice doesn't give us anything. Enable compatibility on amd64 and i386.
2009-04-15 22:38:22 +00:00
GEOM_PART_EBR_COMPAT opt_geom.h
Evolve the ctlreq interface added to geom_gpt into a generic partitioning class that supports multiple schemes. Current schemes supported are APM (Apple Partition Map) and GPT. Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM and GEOM_PART_GPT (resp). The ctlreq interface supports verbs to create and destroy partitioning schemes on a disk; to add, delete and modify partitions; and to commit or undo changes made.
2007-02-07 18:55:31 +00:00
GEOM_PART_GPT opt_geom.h
Connect geom_part_ldm to the kernel build. MFC after: 1 month
2012-03-19 13:16:46 +00:00
GEOM_PART_LDM opt_geom.h
Add the MBR partitioning scheme to g_part. This does not yet support the ability to install boot code.
2007-06-13 04:27:36 +00:00
GEOM_PART_MBR opt_geom.h
Add support for VTOC8 labels (aka sun disk labels). When a label does not have VTOC information about the partitions, it will be created. This is because the VTOC information is used for the partition type and FreeBSD's sunlabel(8) does not create nor use VTOC information. For this purpose, new tags have been added to support FreeBSD's partition types.
2008-03-02 00:52:49 +00:00
GEOM_PART_VTOC8 opt_geom.h
MFgraid/head: Add new RAID GEOM class, that is going to replace ataraid(4) in supporting various BIOS-based software RAIDs. Unlike ataraid(4) this implementation does not depend on legacy ata(4) subsystem and can be used with any disk drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4) with `options ATA_CAM`). To make code more readable and extensible, this implementation follows modular design, including core part and two sets of modules, implementing support for different metadata formats and RAID levels. Support for such popular metadata formats is now implemented: Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage. Such RAID levels are now supported: RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT. For any all of these RAID levels and metadata formats this class supports full cycle of volume operations: reading, writing, creation, deletion, disk removal and insertion, rebuilding, dirty shutdown detection and resynchronization, bad sector recovery, faulty disks tracking, hot-spare disks. For Intel and Promise formats there is support multiple volumes per disk set. Look graid(8) manual page for additional details. Co-authored by: imp Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
2011-03-24 21:31:32 +00:00
GEOM_RAID opt_geom.h
Connect RAID3 GEOM class to the build.
2004-08-16 06:36:21 +00:00
GEOM_RAID3 opt_geom.h
Connect SHSEC GEOM class to the build.
2005-01-11 18:18:40 +00:00
GEOM_SHSEC opt_geom.h
- Connect geom(8) and its libraries to the build. - Connect geom_stripe and geom_nop modules to the build. - Connect STRIPE and NOP classes to the LINT build. - Disconnect gconcat(8) from the build. Supported by: Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:37:13 +00:00
GEOM_STRIPE opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_SUNLABEL opt_geom.h
Add geom_uzip -- geom class that implements read-only compressed disks. Currently supports cloop V2.0 disk compression format. May support more formats in future.
2004-08-13 09:40:58 +00:00
GEOM_UZIP opt_geom.h
o kill few remaining references to the GEOM_UNCOMPRESS; o add GEOM_UZIP_DEBUG.
2016-02-24 05:17:52 +00:00
GEOM_UZIP_DEBUG opt_geom.h
Allow GEOM_VINUM to be statically compiled into the kernel. Submitted by: gleb MFC after: 3 days
2014-05-02 23:23:18 +00:00
GEOM_VINUM opt_geom.h
Bring in the GEOM Virtualisation class, which allows to create huge GEOM providers with limited physical storage and add physical storage as needed. Submitted by: Ivan Voras Sponsored by: Google Summer of Code 2006 Approved by: re (kensmith)
2007-09-23 07:34:23 +00:00
GEOM_VIRSTOR opt_geom.h
Add config glue to add an optional GEOM_VOL to add optional volume support. Reviewed by: jake (mentor)
2003-02-03 17:35:54 +00:00
GEOM_VOL opt_geom.h
Connect GZERO to the build. MFC after: 3 days
2005-07-25 10:49:05 +00:00
GEOM_ZERO opt_geom.h
Import the 'iflib' API library for network drivers. From the author: "iflib is a library to eliminate the need for frequently duplicated device independent logic propagated (poorly) across many network drivers." Participation is purely optional. The IFLIB kernel config option is provided for drivers that want to transition between legacy and iflib modes of operation. ixl and ixgbe driver conversions will be committed shortly. We hope to see participation from the Broadcom and maybe Chelsio drivers in the near future. Submitted by: mmacy@nextbsd.org Reviewed by: gallatin Differential Revision: D5211
2016-05-18 04:35:58 +00:00
IFLIB opt_iflib.h
- For kernel compiled only with KDTRACE_HOOKS and not any lock debugging option, unbreak the lock tracing release semantic by embedding calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined version of the releasing functions for mutex, rwlock and sxlock. Failing to do so skips the lockstat_probe_func invokation for unlocking. - As part of the LOCKSTAT support is inlined in mutex operation, for kernel compiled without lock debugging options, potentially every consumer must be compiled including opt_kdtrace.h. Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES is linked there and it is only used as a compile-time stub [0]. [0] immediately shows some new bug as DTRACE-derived support for debug in sfxge is broken and it was never really tested. As it was not including correctly opt_kdtrace.h before it was never enabled so it was kept broken for a while. Fix this by using a protection stub, leaving sfxge driver authors the responsibility for fixing it appropriately [1]. Sponsored by: EMC / Isilon storage division Discussed with: rstone [0] Reported by: rstone [1] Discussed with: philip
2013-11-25 07:38:45 +00:00
KDTRACE_HOOKS opt_global.h
Move KDTRACE_FRAME to "options" since it's used by kern.pre.mk.
2013-11-29 07:28:59 +00:00
KDTRACE_FRAME opt_kdtrace.h
Add a compile-time control over the size of KN_HASHSIZE. This is needed for applications that use a lot of non-filedescriptor knotes. MFC after: 1 week Sponsored by: Netflix, Inc.
2014-01-07 01:17:27 +00:00
KN_HASHSIZE opt_kqueue.h
Some kernel threads try to do significant work, and the default KSTACK_PAGES doesn't give them enough stack to do much before blowing away the pcb. This adds MI and MD code to allow the allocation of an alternate kstack who's size can be speficied when calling kthread_create. Passing the value 0 prevents the alternate kstack from being created. Note that the ia64 MD code is missing for now, and PowerPC was only partially written due to the pmap.c being incomplete there. Though this patch does not modify anything to make use of the alternate kstack, acpi and usb are good candidates. Reviewed by: jake, peter, jhb
2002-10-02 07:44:29 +00:00
KSTACK_MAX_PAGES
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
KSTACK_PAGES
Add kernel option KSTACK_USAGE_PROF to sample the stack depth on interrupts and report the largest value seen as sysctl debug.max_kstack_used. Useful to estimate how close the kernel stack size is to overflow. In collaboration with: Larry Baird <lab@gta.com> Sponsored by: The FreeBSD Foundation (kib) MFC after: 1 week
2014-10-04 18:38:14 +00:00
KSTACK_USAGE_PROF
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
KTRACE
According to Bruce, this file shouldn't have comments to describe what options do. Comments should be in NOTES and having the comments in two places usually means that one place will just bitrot. Thus, remove the comment for KTRACE_REQUEST_POOL from the previous revision. Requested by: bde
2002-06-07 14:33:23 +00:00
KTRACE_REQUEST_POOL opt_ktrace.h
Add function prototypes and base module for kernel side iconv library. Add simple "xlat" converter which performs 8to8 table based conversion. Unicode converter will be added in the near future. Reviewed by: silence on arch@ Files placement reviewed by: bde Obtained from: smbfs
2001-04-09 09:39:29 +00:00
LIBICONV
Move "options MAC" from opt_mac.h to opt_global.h, as it's now in GENERIC and used in a large number of files, but also because an increasing number of incorrect uses of MAC calls were sneaking in due to copy-and-paste of MAC-aware code without the associated opt_mac.h include. Discussed with: pjd
2009-06-05 14:55:22 +00:00
MAC opt_global.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
MAC_BIBA opt_dontuse.h
MAC_BSDEXTENDED opt_dontuse.h
MAC_IFOFF opt_dontuse.h
MAC_LOMAC opt_dontuse.h
MAC_MLS opt_dontuse.h
MAC_NONE opt_dontuse.h
Make it possible to run ntpd as a non-root user, add ntpd uid and gid. Code analysis and runtime analysis using truss(8) indicate that the only privileged operations performed by ntpd are adjusting system time, and (re-)binding to privileged UDP port 123. These changes add a new mac(4) policy module, mac_ntpd(4), which grants just those privileges to any process running with uid 123. This also adds a new user and group, ntpd:ntpd, (uid:gid 123:123), and makes them the owner of the /var/db/ntp directory, so that it can be used as a location where the non-privileged daemon can write files such as the driftfile, and any optional logfile or stats files. Because there are so many ways to configure ntpd, the question of how to configure it to run without root privs can be a bit complex, so that will be addressed in a separate commit. These changes are just what's required to grant the limited subset of privs to ntpd, and the small change to ntpd to prevent it from exiting with an error if running as non-root. Differential Revision: https://reviews.freebsd.org/D16281
2018-07-19 23:55:29 +00:00
MAC_NTPD opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
MAC_PARTITION opt_dontuse.h
MAC_PORTACL opt_dontuse.h
MAC_SEEOTHERUIDS opt_dontuse.h
Add MAC_STATIC, a kernel option that disables internal MAC Framework synchronization protecting against dynamic load and unload of MAC policies, and instead simply blocks load and unload. In a static configuration, this allows you to avoid the synchronization costs associated with introducing dynamicism. Obtained from: TrustedBSD Project Sponsored by: DARPA, McAfee Research
2004-05-03 20:53:05 +00:00
MAC_STATIC opt_mac.h
Hook up mac_stub to the modules Makefile. Hook up mac_stub in files and options. Reference mac_stub in NOTES.
2003-08-21 16:48:39 +00:00
MAC_STUB opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
MAC_TEST opt_dontuse.h
Add config(8) options that can be used to enable building MAC/veriexec and its fingerprint modules into a kernel. Reviewed by: sjg
2018-07-14 17:18:17 +00:00
MAC_VERIEXEC opt_dontuse.h
MAC_VERIEXEC_SHA1 opt_dontuse.h
MAC_VERIEXEC_SHA256 opt_dontuse.h
MAC_VERIEXEC_SHA384 opt_dontuse.h
MAC_VERIEXEC_SHA512 opt_dontuse.h
Retire MFS_ROOT and MFS_ROOT_SIZE options from the MFS implementation. Add MD_ROOT and MD_ROOT_SIZE options to the md driver. Make the md driver handle MFS_ROOT and MFS_ROOT_SIZE options for compatibility. Add md driver to GENERIC, PCCARD and LINT. This is a cleanup which removes the need for some of the worse hacks in MFS: We really want to have a rootvnode but MFS on a preloaded image doesn't really have one. md is a true device, so it is less trouble. This has been tested with make release, and if people remember to add the "md" pseudo-device to their kernels, PicoBSD should be just fine as well. If people have no other use for MFS, it can be removed from the kernel.
1999-11-26 20:08:44 +00:00
MD_ROOT opt_md.h
Add a MD_ROOT_FSTYPE kernel option. The option specifies the file system part for the MD_ROOT mount string. Hardcoding the the file system type as "ufs" is too restrictive.
2012-11-03 21:20:55 +00:00
MD_ROOT_FSTYPE opt_md.h
Add a new kernel config option, MD_ROOT_READONLY, which forces on the MD_READONLY flag for the md device automatically instantiated during kernel init for an mdroot filesystem. Note that there is specifically and by design no tunable or sysctl control over this feature. Without this option, you already have control over whether the mdroot fs is writeable using vfs.root.mountfrom.options from loader(8), the root_rw_mount rcvar, and by using "mount -u[rw] /" or equivelent on the fly. This option is being added to provide a way to make the mdroot fs truly immutable before userland code begins running. Differential Revision: https://reviews.freebsd.org/D13411
2017-12-20 18:23:22 +00:00
MD_ROOT_READONLY opt_md.h
Retire MFS_ROOT and MFS_ROOT_SIZE options from the MFS implementation. Add MD_ROOT and MD_ROOT_SIZE options to the md driver. Make the md driver handle MFS_ROOT and MFS_ROOT_SIZE options for compatibility. Add md driver to GENERIC, PCCARD and LINT. This is a cleanup which removes the need for some of the worse hacks in MFS: We really want to have a rootvnode but MFS on a preloaded image doesn't really have one. md is a true device, so it is less trouble. This has been tested with make release, and if people remember to add the "md" pseudo-device to their kernels, PicoBSD should be just fine as well. If people have no other use for MFS, it can be removed from the kernel.
1999-11-26 20:08:44 +00:00
MD_ROOT_SIZE opt_md.h
md: use prestaged mfs_root On PowerNV systems, the rootfs is passed through kexec, which loads the rootfs into memory and set two fdt entries to describe where the file is located in the memory; I need to pass this memory region to the md device as a mfs_root, but, current md driver does not support two things: * Just getting a pointer from an external (bootloader) memory. If I need to workaround it, I would need to declare a static array and memcopy from this external memory to this static variable. * The size of the image. The usage of mfs_root_end, which is not a pointer, seems to be not possible for this prestaged scenario. This patch simply adds a new way to load mfs_root from memory. Differential Revision: https://reviews.freebsd.org/D15625 Approved by: kib, jhibbits (mentor)
2018-06-07 13:57:34 +00:00
MD_ROOT_MEM opt_md.h
Hook the MFI driver up to the build.
2006-03-29 09:57:22 +00:00
MFI_DEBUG opt_mfi.h
Add in a bunch of things to the mfi driver: - Linux ioctl support, with the other Linux changes MegaCli will run if you mount linprocfs & linsysfs then set sysctl compat.linux.osrelease=2.6.12 or similar. This works on i386. It should work on amd64 but not well tested yet. StoreLib may or may not work. Remember to kldload mfi_linux. - Add in AEN (Async Event Notification) support so we can get messages from the firmware when something happens. Not all messages are in defined in event detail. Use event_log to try to figure out what happened. - Try to implement something like SIGIO for StoreLib. Since mrmonitor doesn't work right I can't fully test it. StoreLib works best with the rh9 base. In theory mrmonitor isn't needed due to native driver support of AEN :-) Now we can configure and monitor the RAID better. Submitted by: IronPort Systems.
2006-05-18 23:30:48 +00:00
MFI_DECODE_LOG opt_mfi.h
add options MPROF_BUFFERS and MPROF_HASH_SIZE that adjust the sizes of the mutex profiling buffers. Document them in the man page and in NOTES. Ensure _HASH_SIZE is larger than _BUFFERS with a cpp error.
2004-08-19 06:38:26 +00:00
MPROF_BUFFERS opt_mprof.h
MPROF_HASH_SIZE opt_mprof.h
Reimplement how PCI-PCI bridges manage their I/O windows. Previously the driver would verify that requests for child devices were confined to any existing I/O windows, but the driver relied on the firmware to initialize the windows and would never grow the windows for new requests. Now the driver actively manages the I/O windows. This is implemented by allocating a bus resource for each I/O window from the parent PCI bus and suballocating that resource to child devices. The suballocations are managed by creating an rman for each I/O window. The suballocated resources are mapped by passing the bus_activate_resource() call up to the parent PCI bus. Windows are grown when needed by using bus_adjust_resource() to adjust the resource allocated from the parent PCI bus. If the adjust request succeeds, the window is adjusted and the suballocation request for the child device is retried. When growing a window, the rman_first_free_region() and rman_last_free_region() routines are used to determine if the front or end of the existing I/O window is free. From using that, the smallest ranges that need to be added to either the front or back of the window are computed. The driver will first try to grow the window in whichever direction requires the smallest growth first followed by the other direction if that fails. Subtractive bridges will first attempt to satisfy requests for child resources from I/O windows (including attempts to grow the windows). If that fails, the request is passed up to the parent PCI bus directly however. The PCI-PCI bridge driver will try to use firmware-assigned ranges for child BARs first and only allocate a "fresh" range if that specific range cannot be accommodated in the I/O window. This allows systems where the firmware assigns resources during boot but later wipes the I/O windows (some ACPI BIOSen are known to do this) to "rediscover" the original I/O window ranges. The ACPI Host-PCI bridge driver has been adjusted to correctly honor hw.acpi.host_mem_start and the I/O port equivalent when a PCI-PCI bridge makes a wildcard request for an I/O window range. The new PCI-PCI bridge driver is only enabled if the NEW_PCIB kernel option is enabled. This is a transition aide to allow platforms that do not yet support bus_activate_resource() and bus_adjust_resource() in their Host-PCI bridge drivers (and possibly other drivers as needed) to use the old driver for now. Once all platforms support the new driver, the kernel option and old driver will be removed. PR: kern/143874 kern/149306 Tested by: mav
2011-05-03 17:37:24 +00:00
NEW_PCIB opt_global.h
Sort.
2007-03-27 19:32:40 +00:00
NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
- Simplify the #ifdef's for adaptive mutexes and rwlocks by conditionally defining a macro earlier in the file. - Add NO_ADAPTIVE_RWLOCKS option to disable adaptive spinning for rwlocks.
2007-03-22 16:09:23 +00:00
NO_ADAPTIVE_RWLOCKS
Reverse the logic for ADAPTIVE_SX option and enable it by default. Introduce for this operation the reverse NO_ADAPTIVE_SX option. The flag SX_ADAPTIVESPIN to be passed to sx_init_flags(9) gets suppressed and the new flag, offering the reversed logic, SX_NOADAPTIVE is added. Additively implements adaptive spininning for sx held in shared mode. The spinning limit can be handled through sysctls in order to be tuned while the code doesn't reach the release, after which time they should be dropped probabilly. This change has made been necessary by recent benchmarks where it does improve concurrency of workloads in presence of high contention (ie. ZFS). KPI breakage is documented by __FreeBSD_version bumping, manpage and UPDATING updates. Requested by: jeff, kmacy Reviewed by: jeff Tested by: pho
2009-05-29 01:49:27 +00:00
NO_ADAPTIVE_SX
Change NO_EVENTTIMERS from an arm-specific to an MI option, so that it can be used in MI code. This is intended as a temporary measure to unbreak the build. The real fix is to write event timer drivers for legacy arm hardware, then get rid of this option completely. That's going to take a few days.
2014-04-02 19:51:29 +00:00
NO_EVENTTIMERS opt_timer.h
Create deprecation management functions. gone_in(majar, msg); If we're running in FreeBSD major, tell the user this code may be deleted soon. If we're running in FreeBSD major - 1, the the user is deprecated and will be gone in major. Otherwise say nothing. gone_in_dev(dev, major, msg) Just like gone_in, except use device_printf. New tunable / sysctl debug.oboslete_panic: 0 - don't panic, 1 - panic in major or newer , 2 - panic in major - 1 or newer default: 0 if NO_OBSOLETE_CODE is defined, then both of these turn into compile time errors when building for major. Add options NO_OBSOLETE_CODE to kernel build system. This lets us tag code that's going away so users know it will be gone, as well as automatically manage things. Differential Review: https://reviews.freebsd.org/D13818
2018-01-29 00:14:39 +00:00
NO_OBSOLETE_CODE opt_global.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
NO_SYSCTL_DESCR opt_global.h
Add support for reading directly from file to userland buffer when the O_DIRECT descriptor status flag is set and both offset and length is a multiple of the physical media sector size.
2003-03-26 23:40:42 +00:00
NSWBUF_MIN opt_swap.h
Add option for disabling allocation from the packet zone
2007-04-14 20:16:03 +00:00
MBUF_PACKET_ZONE_DISABLE opt_global.h
Move SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME into the MI options file, since MI code uses them, and every platform provides them (except x86_64 whose options file was lacking one). Reviewed by: bde, rwatson
2002-11-18 06:17:07 +00:00
PANIC_REBOOT_WAIT_TIME opt_panic.h
Native PCI-express HotPlug support. PCI-express HotPlug support is implemented via bits in the slot registers of the PCI-express capability of the downstream port along with an interrupt that triggers when bits in the slot status register change. This is implemented for FreeBSD by adding HotPlug support to the PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges representing downstream ports on HotPlug slots. The PCI-PCI bridge driver registers an interrupt handler to receive HotPlug events. It also uses the slot registers to determine the current HotPlug state and drive an internal HotPlug state machine. For simplicty of implementation, the PCI-PCI bridge device detaches and deletes the child PCI device when a card is removed from a slot and creates and attaches a PCI child device when a card is inserted into the slot. The PCI-PCI bridge driver provides a bus_child_present which claims that child devices are present on HotPlug-capable slots only when a card is inserted. Rather than requiring a timeout in the RC for config accesses to not-present children, the pcib_read/write_config methods fail all requests when a card is not present (or not yet ready). These changes include support for various optional HotPlug capabilities such as a power controller, mechanical latch, electro-mechanical interlock, indicators, and an attention button. It also includes support for devices which require waiting for command completion events before initiating a subsequent HotPlug command. However, it has only been tested on ExpressCard systems which support surprise removal and have none of these optional capabilities. PCI-express HotPlug support is conditional on the PCI_HP option which is enabled by default on arm64, x86, and powerpc. Reviewed by: adrian, imp, vangyzen (older versions) Relnotes: yes Differential Revision: https://reviews.freebsd.org/D6136
2016-05-05 22:26:23 +00:00
PCI_HP opt_pci.h
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
PCI_IOV opt_global.h
o Move ISA specific code from ppc.c to ppc_isa.c -- a bus front- end for isa(4). o Add a seperate bus frontend for acpi(4) and allow ISA DMA for it when ISA is configured in the kernel. This allows acpi(4) attachments in non-ISA configurations, as is possible for ia64. o Add a seperate bus frontend for pci(4) and detect known single port parallel cards. o Merge PC98 specific changes under pc98/cbus into the MI driver. The changes are minor enough for conditional compilation and in this form invites better abstraction. o Have ppc(4) usabled on all platforms, now that ISA specifics are untangled enough.
2006-04-24 23:31:51 +00:00
PPC_DEBUG opt_ppc.h
Consistently use <TAB> instead of spaces as option name and file separator.
2009-02-06 10:30:46 +00:00
PPC_PROBE_CHIPSET opt_ppc.h
Make POWERFAIL_NMI, PPS_SYNC and NATM new style options. This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
PPS_SYNC opt_ntp.h
Sort.
2005-11-23 18:11:24 +00:00
PREEMPTION opt_sched.h
Sorted options.
1996-12-23 18:42:02 +00:00
QUOTA
- Introduce the SCHED_ULE and SCHED_4BSD options for compile time selection of the scheduler. - Add SCHED_4BSD as the scheduler for all kernel config files in cvs.
2003-01-26 05:29:12 +00:00
SCHED_4BSD opt_sched.h
- Add an option to compile in SCHED_STATS. - Add some more information about SLEEPQUEUE_PROFILING to NOTES.
2008-03-20 01:30:49 +00:00
SCHED_STATS opt_sched.h
- Introduce the SCHED_ULE and SCHED_4BSD options for compile time selection of the scheduler. - Add SCHED_4BSD as the scheduler for all kernel config files in cvs.
2003-01-26 05:29:12 +00:00
SCHED_ULE opt_sched.h
Add two new kernel options to allow rudimentary profiling of the internal hash tables used in the sleep queue and turnstile code. Each option adds a sysctl tree under debug containing the maximum depth of any bucket in the hash table as well as a separate node for each bucket (or chain) containing the current depth and maximum depth for that bucket.
2004-06-29 02:30:12 +00:00
SLEEPQUEUE_PROFILING
Add options for sl811. Pointed out by: nyan
2005-07-15 05:12:49 +00:00
SLHCI_DEBUG opt_slhci.h
Make SPX_HACK a new-style option.
1998-02-04 04:12:29 +00:00
SPX_HACK
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
STACK opt_stack.h
Remove all redundant option file names that don't hurt readability.
2005-12-12 10:15:11 +00:00
SUIDDIR
Sort all the SYSV IPC options. They are still all clumped together, but at least they are sorted relative to themselves now.
2002-07-15 15:28:16 +00:00
MSGMNB opt_sysvipc.h
MSGMNI opt_sysvipc.h
MSGSEG opt_sysvipc.h
MSGSSZ opt_sysvipc.h
MSGTQL opt_sysvipc.h
Move the MSG* and SEM* options to opt_sysvipc.h Remove evil allocation macros from machdep.c (why was that there???) and use malloc() instead. Move paramters out of param.h and into the code itself. Move a bunch of internal definitions from public sys/*.h headers (without #ifdef _KERNEL even) into the code itself. I had hoped to make some of this more dynamic, but the cost of doing wakeups on all sleeping processes on old arrays was too frightening. The other possibility is to initialize on the first use, and allow dynamic sysctl changes to parameters right until that point. That would allow /etc/rc.sysctl to change SEM* and MSG* defaults as we presently do with SHM*, but without the nightmare of changing a running system.
2000-05-01 13:33:56 +00:00
SEMMNI opt_sysvipc.h
SEMMNS opt_sysvipc.h
SEMMNU opt_sysvipc.h
SEMMSL opt_sysvipc.h
SEMOPM opt_sysvipc.h
SEMUME opt_sysvipc.h
Sort all the SYSV IPC options. They are still all clumped together, but at least they are sorted relative to themselves now.
2002-07-15 15:28:16 +00:00
SHMALL opt_sysvipc.h
SHMMAX opt_sysvipc.h
SHMMAXPGS opt_sysvipc.h
SHMMIN opt_sysvipc.h
SHMMNI opt_sysvipc.h
SHMSEG opt_sysvipc.h
SYSVMSG opt_sysvipc.h
SYSVSEM opt_sysvipc.h
SYSVSHM opt_sysvipc.h
Rename the WATCHDOG option to SW_WATCHDOG and make it use the generic watchdoc(9) interface. Make watchdogd(8) perform as watchdog(8) as well, and make it possible to specify a check command to run, timeout and sleep periods. Update watchdog(4) to talk about the generic interface and add new watchdog(8) page.
2004-02-28 20:56:35 +00:00
SW_WATCHDOG opt_watchdog.h
This commit brings in the TCP high precision timer system (tcp_hpts). It is the forerunner/foundational work of bringing in both Rack and BBR which use hpts for pacing out packets. The feature is optional and requires the TCPHPTS option to be enabled before the feature will be active. TCP modules that use it must assure that the base component is compile in the kernel in which they are loaded. MFC after: Never Sponsored by: Netflix Inc. Differential Revision: https://reviews.freebsd.org/D15020
2018-04-19 13:37:59 +00:00
TCPHPTS opt_inet.h
Add two new kernel options to allow rudimentary profiling of the internal hash tables used in the sleep queue and turnstile code. Each option adds a sysctl tree under debug containing the maximum depth of any bucket in the hash table as well as a separate node for each bucket (or chain) containing the current depth and maximum depth for that bucket.
2004-06-29 02:30:12 +00:00
TURNSTILE_PROFILING
Add rudimentary profiling of the hash table used in the in the umtx code to hold active lock queues. Reviewed by: attilio Approved by: davidxu, gnn (mentor) MFC after: 3 weeks
2012-03-16 20:32:11 +00:00
UMTX_PROFILING
[mips] make UMTX_CHAINS configurable at compile time. The default (512) wastes quite a bit of space which doesn't really buy us much on highly embedded systems which don't take a lot of locks in parallel. This makes it at least build time configurable so people can experiment.
2016-11-15 01:34:38 +00:00
UMTX_CHAINS opt_global.h
turn GEOM_UNCOMPRESS_DEBUG into a proper option so it can be specified in kernel config files.. put VERBOSE_SYSINIT in it's own option header so the one file, init_main.c, can use it instead of requiring an entire kernel recompile to change one file..
2015-02-05 07:51:38 +00:00
VERBOSE_SYSINIT
Add support for zstd-compressed user and kernel core dumps. This works similarly to the existing gzip compression support, but zstd is typically faster and gives better compression ratios. Support for this functionality must be configured by adding ZSTDIO to one's kernel configuration file. dumpon(8)'s new -Z option is used to configure zstd compression for kernel dumps. savecore(8) now recognizes and saves zstd-compressed kernel dumps with a .zst extension. Submitted by: cem (original version) Relnotes: yes Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D13101, https://reviews.freebsd.org/D13633
2018-02-13 19:28:02 +00:00
ZSTDIO opt_zstdio.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and _KPOSIX_PRIORITY_SCHEDULING options to work. Changes: Change all "posix4" to "p1003_1b". Misnamed files are left as "posix4" until I'm told if I can simply delete them and add new ones; Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux; Add man pages for _POSIX_PRIORITY_SCHEDULING system calls; Add options to LINT; Minor fixes to P1003_1B code during testing.
1998-03-28 11:51:01 +00:00
# POSIX kernel options
Add option P1003_1B_MQUEUE.
2005-12-03 01:40:38 +00:00
P1003_1B_MQUEUE opt_posix.h
Regen for added syscalls.
2002-09-19 00:48:57 +00:00
P1003_1B_SEMAPHORES opt_posix.h
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
Reviewed by: msmith, bde long ago POSIX.4 headers and sysctl variables. Nothing should change unless POSIX4 is defined or _POSIX_VERSION is set to 199309.
1998-03-04 10:27:00 +00:00
Put INCLUDE_CONFIG_FILE into opt_config.h rather than the CFLAGS line
1996-12-26 23:38:17 +00:00
# Do we want the config file compiled into the kernel?
INCLUDE_CONFIG_FILE opt_config.h
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
# Options for static filesystems. These should only be used at config
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
# time, since the corresponding lkms cannot work if there are any static
# dependencies. Unusability is enforced by hiding the defines for the
# options in a never-included header.
Bring in the new automounter, similar to what's provided in most other UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format, has proper kernel support, and LDAP integration. There are still a few outstanding problems; they will be fixed shortly. Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions) Phabric: D523 MFC after: 2 weeks Relnotes: yes Sponsored by: The FreeBSD Foundation
2014-08-17 09:44:42 +00:00
AUTOFS opt_dontuse.h
Clean up some leftovers from the root mount cleanup that was done some time ago. FFS_ROOT and CD9660_ROOT are obsolete.
2001-02-04 15:35:10 +00:00
CD9660 opt_dontuse.h
EXT2FS and MSDOSFS to the opt_dontuse bin.
1997-12-16 23:59:37 +00:00
EXT2FS opt_dontuse.h
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
FDESCFS opt_dontuse.h
Retire opt_ffs_broken_fixme.h. Instead of directly calling ffs_snapgone(), use UFS_SNAPGONE() with usual layering. Requested by: bde MFC after: 1 week
2011-03-20 21:05:09 +00:00
FFS opt_dontuse.h
Import a FreeBSD port of the FUSE Linux module. This has been developed during 2 summer of code mandates and being revived by gnn recently. The functionality in this commit mirrors entirely content of fusefs-kmod port, which doesn't need to be installed anymore for -CURRENT setups. In order to get some sparse technical notes, please refer to: http://lists.freebsd.org/pipermail/freebsd-fs/2012-March/013876.html or to the project branch: svn://svn.freebsd.org/base/projects/fuse/ which also contains granular history of changes happened during port refinements. This commit does not came from the branch reintegration itself because it seems svn is not behaving properly for this functionaly at the moment. Partly Sponsored by: Google, Summer of Code program 2005, 2011 Originally submitted by: ilya, Csaba Henk <csaba-ml AT creo DOT hu > In collabouration with: pho Tested by: flo, gnn, Gustau Perez, Kevin Oberman <rkoberman AT gmail DOT com> MFC after: 2 months
2012-10-13 23:54:26 +00:00
FUSE opt_dontuse.h
EXT2FS and MSDOSFS to the opt_dontuse bin.
1997-12-16 23:59:37 +00:00
MSDOSFS opt_dontuse.h
Import work done under project/nand (@235533) into head. The NAND Flash environment consists of several distinct components: - NAND framework (drivers harness for NAND controllers and NAND chips) - NAND simulator (NANDsim) - NAND file system (NAND FS) - Companion tools and utilities - Documentation (manual pages) This work is still experimental. Please use with caution. Obtained from: Semihalf Supported by: FreeBSD Foundation, Juniper Networks
2012-05-17 10:11:18 +00:00
NANDFS opt_dontuse.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
NULLFS opt_dontuse.h
PROCFS opt_dontuse.h
Add a PSEUDOFS option to allow pseudofs to be built statically.
2001-06-11 10:58:07 +00:00
PSEUDOFS opt_dontuse.h
- Trim an unused and bogus Makefile for mount_smbfs. - Reconnect with some minor modifications, in particular now selsocket() internals are adapted to use sbintime units after recent'ish calloutng switch.
2013-06-28 21:00:08 +00:00
SMBFS opt_dontuse.h
MFp4: Add tmpfs, an efficient memory file system. Please note that, this is currently considered as an experimental feature so there could be some rough edges. Consult http://wiki.freebsd.org/TMPFS for more information. For now, connect tmpfs to build on i386 and amd64 architectures only. Please let us know if you have success with other platforms. This work was developed by Julio M. Merino Vidal for NetBSD as a SoC project; Rohit Jalan ported it from NetBSD to FreeBSD. Howard Su and Glen Leeder are worked on it to continue this effort. Obtained from: NetBSD via p4 Submitted by: Howard Su (with some minor changes) Approved by: re (kensmith)
2007-06-16 01:56:05 +00:00
TMPFS opt_dontuse.h
Add a filesystem driver for the Universal Disk Format. For more info, see http://people.freebsd.org/~scottl/udf MFC after: when asmodai gets the backport done Prodded by: phk asmodai des
2002-04-14 16:36:49 +00:00
UDF opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
UNIONFS opt_dontuse.h
Move static ZFS compile option to the other static file system options.
2013-07-03 20:21:39 +00:00
ZFS opt_dontuse.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
Add PSEUDOFS_TRACE option.
2005-03-14 16:04:27 +00:00
# Pseudofs debugging
PSEUDOFS_TRACE opt_pseudofs.h
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
# In-kernel GSS-API
KGSSAPI opt_kgssapi.h
KGSSAPI_DEBUG opt_kgssapi.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
# These static filesystems have one slightly bogus static dependency in
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
# sys/i386/i386/autoconf.c. If any of these filesystems are
# statically compiled into the kernel, code for mounting them as root
Clean up some leftovers from the root mount cleanup that was done some time ago. FFS_ROOT and CD9660_ROOT are obsolete.
2001-02-04 15:35:10 +00:00
# filesystems will be enabled - but look below.
Add the kernel build glue for the experimental NFS subsystem that includes support for NFSv4. The subsystem can optionally be linked into the kernel using the two options: NFSCL - the client NFSD - the server It is also built as three modules: nfscl - the client nfsd - the server nfscommon - functions shared by the client and server Approved by: kib (mentor)
2009-05-28 19:45:11 +00:00
# NFSCL - client
# NFSD - server
NFSCL opt_nfs.h
NFSD opt_nfs.h
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
# filesystems and libiconv bridge
CD9660_ICONV opt_dontuse.h
MSDOSFS_ICONV opt_dontuse.h
Hook the udf_iconv module up to the kernel build. Submitted by: imura@ryu16.org
2003-11-05 06:38:14 +00:00
UDF_ICONV opt_dontuse.h
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
# If you are following the conditions in the copyright,
# you can enable soft-updates which will speed up a lot of thigs
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
# and make the system safer from crashes at the same time.
# otherwise a STUB module will be compiled in.
SOFTUPDATES opt_ffs.h
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
# On small, embedded systems, it can be useful to turn off support for
# snapshots. It saves about 30-40k for a feature that would be lightly
# used, if it is used at all.
NO_FFS_SNAPSHOT opt_ffs.h
Introduce support for POSIX.1e ACLs on UFS-based file systems. This implementation is still experimental, and while fairly broadly tested, is not yet intended for production use. Support for POSIX.1e ACLs on UFS will not be MFC'd to RELENG_4. This implementation works by providing implementations of VOP_[GS]ETACL() for FFS, as well as modifying the appropriate access control and file creation routines. In this implementation, ACLs are backed into extended attributes; the base ACL (owner, group, other) permissions remain in the inode for performance and compatibility reasons, so only the extended and default ACLs are placed in extended attributes. The logic for ACL evaluation is provided by the fs-independent kern/kern_acl.c. o Introduce UFS_ACL, a compile-time configuration option that enables support for ACLs on FFS (and potentially other UFS-based file systems). o Introduce ufs_getacl(), ufs_setacl(), ufs_aclcheck(), which respectively get, set, and check the ACLs on the passed vnode. o Introduce ufs_sync_acl_from_inode(), ufs_sync_inode_from_acl() to maintain access control information between inode permissions and extended attribute data. o Modify ufs_access() to load a file access ACL and invoke vaccess_acl_posix1e() if ACLs are available on the file system o Modify ufs_mkdir() and ufs_makeinode() to associate ACLs with newly created directories and files, inheriting from the parent directory's default ACL. o Enable these new vnode operations and conditionally compiled code paths if UFS_ACL is defined. A few notes: o This implementation is fairly widely tested, but still should be considered experimental. o Currently, ACLs are not exported via NFS, instead, the summarizing file mode/etc from the inode is. This results in conservative protection behavior, similar to the behavior of ACL-nonaware programs acting locally. o It is possible that underlying binary data formats associated with this implementation may change. Consumers of the implementation should expect to find their local configuration obsoleted in the next few months, resulting in possible loss of ACL data during an upgrade. o The extended attributes interface and implementation is still undergoing modification to address portable interface concerns, as well as performance. o Many applications do not yet correctly handle ACLs. In general, due to the POSIX.1e ACL model, behavior of ACL-unaware applications will be conservative with respects to file protection; some caution is recommended. o Instructions for configuring and maintaining ACLs on UFS will be committed in the near future; in the mean time it is possible to reference the README included in the last UFS ACL distribution placed in the TrustedBSD web site: http://www.TrustedBSD.org/downloads/ Substantial debugging, hardware, travel, or connectivity support for this project was provided by: BSDi, Safeport Network Services, and NAI Labs. Significant coding contributions were made by Chris Faulhaber. Additional support was provided by Brian Feldman, Thomas Moestl, and Ilmar Habibulin. Reviewed by: jedgar, keichii, mckusick, trustedbsd-discuss, freebsd-fs Obtained from: TrustedBSD Project
2001-03-26 17:53:19 +00:00
# Enabling this option turns on support for Access Control Lists in UFS,
# which can be used to support high security configurations. Depends on
# UFS_EXTATTR.
UFS_ACL opt_ufs.h
o Change options FFS_EXTATTR and options FFS_EXTATTR_AUTOSTART to options UFS_EXTATTR and UFS_EXTATTR_AUTOSTART respectively. This change reflects the fact that our EA support is implemented entirely at the UFS layer (modulo FFS start/stop/autostart hooks for mount and unmount events). This also better reflects the fact that [shortly] MFS will also support EAs, as well as possibly IFS. o Consumers of the EA support in FFS are reminded that as a result, they must change kernel config files to reflect the new option names. Obtained from: TrustedBSD Project
2001-03-19 04:35:40 +00:00
# Enabling this option turns on support for extended attributes in UFS-based
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
# filesystems, which can be used to support high security configurations
# as well as new filesystem features.
o Change options FFS_EXTATTR and options FFS_EXTATTR_AUTOSTART to options UFS_EXTATTR and UFS_EXTATTR_AUTOSTART respectively. This change reflects the fact that our EA support is implemented entirely at the UFS layer (modulo FFS start/stop/autostart hooks for mount and unmount events). This also better reflects the fact that [shortly] MFS will also support EAs, as well as possibly IFS. o Consumers of the EA support in FFS are reminded that as a result, they must change kernel config files to reflect the new option names. Obtained from: TrustedBSD Project
2001-03-19 04:35:40 +00:00
UFS_EXTATTR opt_ufs.h
UFS_EXTATTR_AUTOSTART opt_ufs.h
Introduce extended attribute support for FFS, allowing arbitrary (name, value) pairs to be associated with inodes. This support is used for ACLs, MAC labels, and Capabilities in the TrustedBSD security extensions, which are currently under development. In this implementation, attributes are backed to data vnodes in the style of the quota support in FFS. Support for FFS extended attributes may be enabled using the FFS_EXTATTR kernel option (disabled by default). Userland utilities and man pages will be committed in the next batch. VFS interfaces and man pages have been in the repo since 4.0-RELEASE and are unchanged. o ufs/ufs/extattr.h: UFS-specific extattr defines o ufs/ufs/ufs_extattr.c: bulk of support routines o ufs/{ufs,ffs,mfs}/*.[ch]: hooks and extattr.h includes o contrib/softupdates/ffs_softdep.c: extattr.h includes o conf/options, conf/files, i386/conf/LINT: added FFS_EXTATTR o coda/coda_vfsops.c: XXX required extattr.h due to ufsmount.h (This should not be the case, and will be fixed in a future commit) Currently attributes are not supported in MFS. This will be fixed. Reviewed by: adrian, bp, freebsd-fs, other unthanked souls Obtained from: TrustedBSD Project
2000-04-15 03:34:27 +00:00
Bring in dirhash, a simple hash-based lookup optimisation for large directories. When enabled via "options UFS_DIRHASH", in-core hash arrays are maintained for large directories. These allow all directory operations to take place quickly instead of requiring long linear searches. For now anyway, dirhash is not enabled by default. The in-core hash arrays have a memory requirement that is approximately half the size of the size of the on-disk directory file. A number of new sysctl variables allow control over which directories get hashed and over the maximum amount of memory that dirhash will use: vfs.ufs.dirhash_minsize The minimum on-disk directory size for which hashing should be used. The default is 2560 (2.5k). vfs.ufs.dirhash_maxmem The system-wide maximum total memory to be used by dirhash data structures. The default is 2097152 (2MB). The current amount of memory being used by dirhash is visible through the read-only sysctl variable vfs.ufs.dirhash_maxmem. Finally, some extra sanity checks that are enabled by default, but which may have an impact on performance, can be disabled by setting vfs.ufs.dirhash_docheck to 0. Discussed on: -fs, -hackers
2001-07-10 21:21:29 +00:00
# Enable fast hash lookups for large directories on UFS-based filesystems.
UFS_DIRHASH opt_ufs.h
Hook up gjournal bits to the build. Sponsored by: home.pl
2006-10-31 22:22:30 +00:00
# Enable gjournal-based UFS journal.
UFS_GJOURNAL opt_ufs.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
# The below sentence is not in English, and neither is this one.
# We plan to remove the static dependences above, with a
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
# <filesystem>_ROOT option to control if it usable as root. This list
# allows these options to be present in config files already (though
# they won't make any difference yet).
convert some nfs tunables to options, these are: NFS_MINATTRTIMO VREG attrib cache timeout in sec NFS_MAXATTRTIMO NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec NFS_MAXDIRATTRTIMO NFS_GATHERDELAY Default write gather delay (msec) NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this NFS_WDELAYHASHSIZ and with this NFS_MUIDHASHSIZ Tune the size of nfsmount with this NFS_NOSERVER (already documented in LINT) NFS_DEBUG turn on NFS debugging also, because NFS_ROOT is used by very different files, it has been renamed to opt_nfsroot.h instead of the old opt_nfs.h....
1998-06-30 03:01:37 +00:00
NFS_ROOT opt_nfsroot.h
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
- Trim an unused and bogus Makefile for mount_smbfs. - Reconnect with some minor modifications, in particular now selsocket() internals are adapted to use sbintime units after recent'ish calloutng switch.
2013-06-28 21:00:08 +00:00
# SMB/CIFS requester
NETSMB opt_netsmb.h
Import the netdump client code. This is a component of a system which lets the kernel dump core to a remote host after a panic, rather than to a local storage device. The server component is available in the ports tree. netdump is particularly useful on diskless systems. The netdump(4) man page contains some details describing the protocol. Support for configuring netdump will be added to dumpon(8) in a future commit. To use netdump, the kernel must have been compiled with the NETDUMP option. The initial revision of netdump was written by Darrell Anderson and was integrated into Sandvine's OS, from which this version was derived. Reviewed by: bdrewery, cem (earlier versions), julian, sbruno MFC after: 1 month X-MFC note: use a spare field in struct ifnet Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D15253
2018-05-06 00:38:29 +00:00
# Enable netdump(4) client support.
NETDUMP opt_global.h
Move MAXUSERS out of opt_param.h to make sure that other code doesn't use it rather than the tunable version.
2001-07-26 23:05:35 +00:00
# Options used only in subr_param.c.
add HZ missing in options. changing HZ used to break xntpd's PLL but it should be ok now (unless xntpd is misconfigured).
1999-01-14 03:30:48 +00:00
HZ opt_param.h
Allow setting MAXFILES in the kernel config.
1999-04-09 16:28:11 +00:00
MAXFILES opt_param.h
Sorted options.
1996-12-23 18:42:02 +00:00
NBUF opt_param.h
Implemented zero-copy TCP/IP extensions via sendfile(2) - send a file to a stream socket. sendfile(2) is similar to implementations in HP-UX, Linux, and other systems, but the API is more extensive and addresses many of the complaints that the Apache Group and others have had with those other implementations. Thanks to Marc Slemko of the Apache Group for helping me work out the best API for this. Anyway, this has the "net" result of speeding up sends of files over TCP/IP sockets by about 10X (that is to say, uses 1/10th of the CPU cycles) when compared to a traditional read/write loop.
1998-11-05 14:28:26 +00:00
NSFBUFS opt_param.h
Limit the amount of KVM reserved for the buffer cache and for swap-meta information. The default limits only effect machines with > 1GB of ram and can be overriden with two new kernel conf variables VM_SWZONE_SIZE_MAX and VM_BCACHE_SIZE_MAX, or with loader variables kern.maxswzone and kern.maxbcache. This has the effect of leaving more KVM available for sizing NMBCLUSTERS and 'maxusers' and should avoid tripups where a sysad adds memory to a machine and then sees the kernel panic on boot due to running out of KVM. Also change the default swap-meta auto-sizing calculation to allocate half of what it was previously allocating. The prior defaults were way too high. Note that we cannot afford to run out of swap-meta structures so we still stay somewhat conservative here.
2001-08-20 00:41:12 +00:00
VM_BCACHE_SIZE_MAX opt_param.h
VM_SWZONE_SIZE_MAX opt_param.h
Move MAXUSERS out of opt_param.h to make sure that other code doesn't use it rather than the tunable version.
2001-07-26 23:05:35 +00:00
MAXUSERS
Make MAXTSIZ, DFLDSIZ, MAXDSIZ, DFLSSIZ, MAXSSIZ, SGROWSIZ loader tunable. Reviewed by: peter MFC after: 2 weeks
2001-10-10 23:06:54 +00:00
DFLDSIZ opt_param.h
MAXDSIZ opt_param.h
MAXSSIZ opt_param.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
# Generic SCSI options.
Update for CAM.
1998-09-15 09:59:15 +00:00
CAM_MAX_HIGHPOWER opt_cam.h
CAMDEBUG opt_cam.h
To make CAM debugging easier, compile in some debug flags (CAM_DEBUG_INFO, CAM_DEBUG_CDB, CAM_DEBUG_PERIPH and CAM_DEBUG_PROBE) by default. List of these flags can be modified with CAM_DEBUG_COMPILE kernel option. CAMDEBUG kernel option still enables all possible debug, if not overriden. Additional 50KB of kernel size is a good price for the ability to debug problems without rebuilding the kernel. In case where size is important, debugging can be compiled out by setting CAM_DEBUG_COMPILE option to 0.
2012-06-07 10:05:51 +00:00
CAM_DEBUG_COMPILE opt_cam.h
Add CAM_DEBUG_DELAY option.
1999-08-16 22:39:53 +00:00
CAM_DEBUG_DELAY opt_cam.h
Update for CAM.
1998-09-15 09:59:15 +00:00
CAM_DEBUG_BUS opt_cam.h
CAM_DEBUG_TARGET opt_cam.h
CAM_DEBUG_LUN opt_cam.h
CAM_DEBUG_FLAGS opt_cam.h
Expose CAM_BOOT_DELAY as a kernel conf item now. This allows users who boot without loader to adjust their environments around slightly buggy or slow hardware. PR: kern/161809 Submitted by: rozhuk.im@gmail.com MFC after: 2 weeks
2013-04-20 00:33:37 +00:00
CAM_BOOT_DELAY opt_cam.h
Rename CAM_NETFLIX_IOSCHED to CAM_IOSCHED_DYNAMIC to better reflect its nature. Approved by: re Reviewed By: jhb Differential Revision: https://reviews.freebsd.org/D6811
2016-06-23 23:20:58 +00:00
CAM_IOSCHED_DYNAMIC opt_cam.h
Create a sysctl kern.cam.{,a,n}da.X.invalidate kern.cam.{,a,n}da.X.invalidate=1 forces *daX to detach by calling cam_periph_invalidate on the underlying periph. This is for testing purposes only. Include only with options CAM_TEST_FAILURE and rename the former [AN]DA_TEST_FAILURE, and fix nda to compile with it set. We're using it at work to harden geom and the buffer cache to be resilient in the face of drive failure. Today, it far too often results in a panic. While much work was done on SIM initiated removal for the USB thumnb drive removal work, little has been done for periph initiated removal. This simulates what *daerror() does for some errors nicely: we get the same panics with it that we do with failing drives. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D14581
2018-03-14 17:53:37 +00:00
CAM_TEST_FAILURE opt_cam.h
Sorted options.
1996-12-23 18:42:02 +00:00
SCSI_DELAY opt_scsi.h
Update for CAM.
1998-09-15 09:59:15 +00:00
SCSI_NO_SENSE_STRINGS opt_scsi.h
SCSI_NO_OP_STRINGS opt_scsi.h
- Add kern.cam.ada.X.write_cache tunables/sysctls to control write caching on per-device basis. - While adding support for per-device sysctls, merge from graid branch support for ADA_TEST_FAILURE kernel option, which opens few more sysctl, allowing to simulate read and write errors for testing purposes.
2011-04-08 14:42:29 +00:00
# Options used only in cam/ata/ata_da.c
- With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers.
2013-04-06 19:12:49 +00:00
ATA_STATIC_ID opt_ada.h
- Add kern.cam.ada.X.write_cache tunables/sysctls to control write caching on per-device basis. - While adding support for per-device sysctls, merge from graid branch support for ADA_TEST_FAILURE kernel option, which opens few more sysctl, allowing to simulate read and write errors for testing purposes.
2011-04-08 14:42:29 +00:00
Update for CAM.
1998-09-15 09:59:15 +00:00
# Options used only in cam/scsi/scsi_cd.c
CHANGER_MIN_BUSY_SECONDS opt_cd.h
CHANGER_MAX_BUSY_SECONDS opt_cd.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
Track Ref / DeRef and Hold / Unhold that da is doing to track down leaks. We assume each source can be taken / dropped only once and don't recurse. These are only enabled via DA_TRACK_REFS or INVARIANTS. There appreas to be a reference leak under extreme load, and these should help us colaberatively work it out. It also documents better the reference / holding protocol better. Reviewed by: ken@, scottl@ Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D14040
2018-01-25 21:38:30 +00:00
# Options used only in cam/scsi/scsi_da.c
DA_TRACK_REFS opt_da.h
Fix short timeout problems with the pt(4) driver: - increase the default timeout from 10 seconds to 60 seconds - add a new kernel option, SCSI_PT_DEFAULT_TIMEOUT, that lets users specify the default timeout for the pt driver to use - add two new ioctls, one to get the timeout for a given pt device, the other to set the timeout for a given pt device. The idea is that userland applications using the device can set the timeout to suit their purposes. The ioctls are defined in a new header file, sys/ptio.h PR: 10266 Reviewed by: gibbs, joerg
1999-08-20 03:48:11 +00:00
# Options used only in cam/scsi/scsi_sa.c.
A slightly more complete change to timeouts: 1. Add SA_IO_TIMEOUT as an option (4 minutes default) to cover reads, writes, wfm, test unit ready. 2. Add internal SCSIOP_TIMEOUT (e.g., for mode sense) at 1 minute. This should not require an option, but is cleaner to parameterize. MFC after: 1 week
2001-07-02 17:48:59 +00:00
SA_IO_TIMEOUT opt_sa.h
Patches from DES to create three new kernel config options to control timeouts in the SA driver (timeouts for space, rewind and erase). Folks can lengthen the timeouts if their hardware is especially slow, or shorten them if they want to be notified of errors a little sooner. Also, get rid of two OD driver options. The od driver has been made obsolete by the da driver. Reviewed by: ken, gibbs Submitted by: Dag-Erling Coidan Smørgrav <des@FreeBSD.ORG>
1998-10-02 05:15:51 +00:00
SA_SPACE_TIMEOUT opt_sa.h
SA_REWIND_TIMEOUT opt_sa.h
SA_ERASE_TIMEOUT opt_sa.h
add SA_1FM_AT_EOD option for scsi_sa- this causes a default behaviour of one filemark at end of media for tapes otherwise neither quirked nor known.
1999-10-02 20:23:52 +00:00
SA_1FM_AT_EOD opt_sa.h
Miscellaneous cleanup and minor fixes by Shunsuke and by me. . use new-style options . introduce an option OD_AUTO_TURNOFF . try to use the native geometry as reported by the drive instead of a faked on -- MOs do have a ``classical'' geometry . make the scsi_start_unit() actually working . some cosmetic fixes Submitted by: akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1996-06-16 19:58:24 +00:00
Fix short timeout problems with the pt(4) driver: - increase the default timeout from 10 seconds to 60 seconds - add a new kernel option, SCSI_PT_DEFAULT_TIMEOUT, that lets users specify the default timeout for the pt driver to use - add two new ioctls, one to get the timeout for a given pt device, the other to set the timeout for a given pt device. The idea is that userland applications using the device can set the timeout to suit their purposes. The ioctls are defined in a new header file, sys/ptio.h PR: 10266 Reviewed by: gibbs, joerg
1999-08-20 03:48:11 +00:00
# Options used only in cam/scsi/scsi_pt.c
SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
add options collateral for SES/SAF-TE driver
2000-01-15 07:12:09 +00:00
# Options used only in cam/scsi/scsi_ses.c
SES_ENABLE_PASSTHROUGH opt_ses.h
Add options used by the `sym' (Symbios SCSI) driver. SYM_SETUP_LP_PROBE_MAP Low Priority Probe Map (bits) SYM_SETUP_SCSI_DIFF HVD support for 825a, 875, 885 SYM_SETUP_PCI_PARITY PCI parity checking SYM_SETUP_MAX_LUN Number of LUNs supported Submitted by: Gerard Roudier <groudier@club-internet.fr>
1999-12-16 16:09:57 +00:00
# Options used in dev/sym/ (Symbios SCSI driver).
SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
# Allows the ncr to take precedence
# 1 (1<<0) -> 810a, 860
# 2 (1<<1) -> 825a, 875, 885, 895
# 4 (1<<2) -> 895a, 896, 1510d
SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
# disabled:0 (default), enabled:1
SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
# disabled:0, enabled:1 (default)
SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
# default:8, range:[1..64]
Move pci/ncr to dev/ncr.
2014-09-23 05:37:17 +00:00
# Options used only in dev/ncr/*
Sorted options.
1996-12-23 18:42:02 +00:00
SCSI_NCR_DEBUG opt_ncr.h
Fixed spelling of SCSI_NCR_MAX*.
1996-12-23 18:40:40 +00:00
SCSI_NCR_MAX_SYNC opt_ncr.h
SCSI_NCR_MAX_WIDE opt_ncr.h
Sorted options.
1996-12-23 18:42:02 +00:00
SCSI_NCR_MYADDR opt_ncr.h
Add options for NCR driver.
1996-12-15 16:35:54 +00:00
D'oh! I forgot to commit this a while back. Add an option for enabling f/w crashdumps for the isp driver. MFC after: 1 week
2002-04-04 23:54:58 +00:00
# Options used only in dev/isp/*
Add in new Qlogic isp config options: ISP_COMPILE_1020_FW compile in Qlogic 1020/1040 PCI SCSI f/w ISP_COMPILE_1080_FW compile in Qlogic 1080/1240/1280 PCI LVD SCSI f/w ISP_COMPILE_2100_FW compile in Qlogic 2100 Fibre Channel f/w ISP_COMPILE_2200_FW compile in Qlogic 2200 Fibre Channel f/w ISP_COMPILE_FW compile in all firmware (overrides the others) These are not on by default, thus saving about 200KBytes. Additionally: SCSI_ISP_WWN to define a WWN to use
1999-11-21 03:00:19 +00:00
ISP_TARGET_MODE opt_isp.h
D'oh! I forgot to commit this a while back. Add an option for enabling f/w crashdumps for the isp driver. MFC after: 1 week
2002-04-04 23:54:58 +00:00
ISP_FW_CRASH_DUMP opt_isp.h
Add ISP_DEFAULT_ROLES as a config option.
2006-04-18 22:24:55 +00:00
ISP_DEFAULT_ROLES opt_isp.h
Add ISP_INTERNAL_TARGET as an option for isp(4).
2010-11-27 20:38:26 +00:00
ISP_INTERNAL_TARGET opt_isp.h
Turn on FC-Tape by default in the isp(4) driver. FC-Tape provides additional link level error recovery, and is highly recommended for tape devices. It will only be turned on for a given target if the target supports it. Without this setting, we default to whatever FC-Tape setting is in NVRAM on the card. This can be overridden by setting the following loader tunable, for example for isp0: hint.isp.0.nofctape=1 sys/conf/options: Add a new kernel config option, ISP_FCTAPE_OFF, that defaults the FC-Tape configuration to off. sys/dev/isp/isp_pci.c: If ISP_FCTAPE_OFF is defined, turn off FC-Tape. Otherwise, turn it on if the card supports it. share/man/man4/isp.4: Add a description of FC-Tape to the isp(4) man page. Add descriptions of the fctape and nofctape options, as well as the ISP_FCTAPE_OFF kernel configuration option. Add the ispfw module and kernel drivers to the suggested configurations at the top of the man page so that users are less likely to leave it out. The driver works well with the included firmware, but may not work at all with whatever firmware the user has flashed on their card. MFC after: 3 days Sponsored by: Spectra Logic
2016-12-20 21:17:07 +00:00
ISP_FCTAPE_OFF opt_isp.h
add isp host adapter specific options
1999-02-09 01:02:37 +00:00
Introduce Danny Braniss' iSCSI initiator, version 2.0.99. Please read the included man pages on how to use it. This code is still somewhat experimental but has been successfully tested on a number of targets. Many thanks to Danny for contributing this. Approved by: re
2007-07-24 15:35:02 +00:00
# Options used only in dev/iscsi
ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
# Net stuff.
return of the accept filter part II accept filters are now loadable as well as able to be compiled into the kernel. two accept filters are provided, one that returns sockets when data arrives the other when an http request is completed (doesn't work with 0.9 requests) Reviewed by: jmg
2000-06-20 01:09:23 +00:00
ACCEPT_FILTER_DATA
Add an accept filter for TCP based DNS requests. It waits until the whole first request is present before returning from accept.
2008-07-18 14:44:51 +00:00
ACCEPT_FILTER_DNS
return of the accept filter part II accept filters are now loadable as well as able to be compiled into the kernel. two accept filters are provided, one that returns sockets when data arrives the other when an http request is completed (doesn't work with 0.9 requests) Reviewed by: jmg
2000-06-20 01:09:23 +00:00
ACCEPT_FILTER_HTTP
Link ALTQ to the build and break with ABI for struct ifnet. Please recompile your (network) modules as well as any userland that might make sense of sizeof(struct ifnet). This does not change the queueing yet. These changes will follow in a seperate commit. Same with the driver changes, which need case by case evaluation. __FreeBSD_version bump will follow. Tested-by: (i386)LINT
2004-06-13 17:29:10 +00:00
ALTQ opt_global.h
ALTQ_CBQ opt_altq.h
ALTQ_CDNR opt_altq.h
Add ALTQ(9) support for the CoDel algorithm. CoDel is a parameterless queue discipline that handles variable bandwidth and RTT. It can be used as the single queue discipline on an interface or as a sub discipline of existing queue disciplines such as PRIQ, CBQ, HFSC, FAIRQ. Differential Revision: https://reviews.freebsd.org/D3272 Reviewd by: rpaulo, gnn (previous version) Obtained from: pfSense Sponsored by: Rubicon Communications (Netgate)
2015-08-21 22:02:22 +00:00
ALTQ_CODEL opt_altq.h
Link ALTQ to the build and break with ABI for struct ifnet. Please recompile your (network) modules as well as any userland that might make sense of sizeof(struct ifnet). This does not change the queueing yet. These changes will follow in a seperate commit. Same with the driver changes, which need case by case evaluation. __FreeBSD_version bump will follow. Tested-by: (i386)LINT
2004-06-13 17:29:10 +00:00
ALTQ_DEBUG opt_altq.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
ALTQ_HFSC opt_altq.h
ALTQ FAIRQ discipline import from DragonFLY Differential Revision: https://reviews.freebsd.org/D2847 Reviewed by: glebius, wblock(manpage) Approved by: gnn(mentor) Obtained from: pfSense Sponsored by: Netgate
2015-06-24 19:16:41 +00:00
ALTQ_FAIRQ opt_altq.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
ALTQ_NOPCC opt_altq.h
ALTQ_PRIQ opt_altq.h
ALTQ_RED opt_altq.h
ALTQ_RIO opt_altq.h
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
BOOTP opt_bootp.h
Allow the block size used when booting over NFS to be overridden. It defaults to 8192 bytes which is the size currently used.
2008-05-16 06:27:03 +00:00
BOOTP_BLOCKSIZE opt_bootp.h
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
BOOTP_COMPAT opt_bootp.h
BOOTP_NFSROOT opt_bootp.h
BOOTP_NFSV3 opt_bootp.h
BOOTP_WIRED_TO opt_bootp.h
- Don't pollute opt_global.h with DEVICE_POLLING and introduce opt_device_polling.h - Include opt_device_polling.h into appropriate files. - Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that can be compiled as loadable modules. Reviewed by: bde
2005-10-05 10:09:17 +00:00
DEVICE_POLLING
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
DUMMYNET opt_ipdn.h
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
RATELIMIT opt_ratelimit.h
Add support for hardware rate limiting to mlx5en(4). The hardware rate limiting feature is enabled by the RATELIMIT kernel option. Please refer to ifconfig(8) and the txrtlmt option and the SO_MAX_PACING_RATE set socket option for more information. This feature is compatible with hardware transmit send offload, TSO. A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to setup the ratelimit table and also to fine tune various rate limit related parameters. Sponsored by: Mellanox Technologies
2018-05-29 14:04:57 +00:00
RATELIMIT_DEBUG opt_ratelimit.h
Make INET a proper option. This will not make any of object files that LINT create change; there might be differences with INET disabled, but hardly anything compiled before without INET anyway. Now the 'obvious' things will give a proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The only thing that _should_ work (but can't be made to compile reasonably easily) is sppp :-( This commit move struct arpcom from <netinet/if_ether.h> to <net/if_arp.h>.
1998-01-08 23:42:31 +00:00
INET opt_inet.h
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
INET6 opt_inet6.h
Make IPDIVERT a supported option. Alas, in_var.h depends on it, i hope i've found out all files that actually depend on this dependancy. IMHO, it's not very good practice to change the size of internal structs depending on kernel options.
1997-11-05 20:17:23 +00:00
IPDIVERT
Add kernel parts of revived ipfilter (3.3.3.)
1999-11-23 21:44:59 +00:00
IPFILTER opt_ipfilter.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
Add kernel parts of revived ipfilter (3.3.3.)
1999-11-23 21:44:59 +00:00
IPFILTER_LOG opt_ipfilter.h
Patches from Ruslan Ermilov to address problems compiling LINT
2005-04-28 16:33:15 +00:00
IPFILTER_LOOKUP opt_ipfilter.h
Convert ipfw to use opt_ipfw.h
1996-06-12 19:34:33 +00:00
IPFIREWALL opt_ipfw.h
Allow a compile-time override of the ipfw deny rule. For a 'firewall' you don't want this (and the documentation explains why), but if you use ipfw as an as-needed casual filter as needed which normally runs as 'allow all' then having the kernel and /sbin/ipfw get out of sync is a *MAJOR* pain in the behind. PR: 4141 Submitted by: Heikki Suonsivu <hsu@mail.clinet.fi>
1997-09-10 03:07:14 +00:00
IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
IPFIREWALL_NAT opt_ipfw.h
Unbreak LINT build. Sponsored by: Microsoft
2016-08-15 04:59:38 +00:00
IPFIREWALL_NAT64 opt_ipfw.h
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
IPFIREWALL_NAT64_DIRECT_OUTPUT opt_ipfw.h
Add ipfw_nptv6 module that implements Network Prefix Translation for IPv6 as defined in RFC 6296. The module works together with ipfw(4) and implemented as its external action module. When it is loaded, it registers as eaction and can be used in rules. The usage pattern is similar to ipfw_nat(4). All matched by rule traffic goes to the NPT module. Reviewed by: hrs Obtained from: Yandex LLC MFC after: 1 month Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6420
2016-07-18 19:46:31 +00:00
IPFIREWALL_NPTV6 opt_ipfw.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
IPFIREWALL_VERBOSE opt_ipfw.h
IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
Add ipfw_pmod kernel module. The module is designed for modification of a packets of any protocols. For now it implements only TCP MSS modification. It adds the external action handler for "tcp-setmss" action. A rule with tcp-setmss action does additional check for protocol and TCP flags. If SYN flag is present, it parses TCP options and modifies MSS option if its value is greater than configured value in the rule. Then it adjustes TCP checksum if needed. After handling the search continues with the next rule. Obtained from: Yandex LLC MFC after: 2 weeks Relnotes: yes Sponsored by: Yandex LLC No objection from: #network Differential Revision: https://reviews.freebsd.org/D10150
2017-04-03 03:07:48 +00:00
IPFIREWALL_PMOD opt_ipfw.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
IPSEC opt_ipsec.h
IPSEC_DEBUG opt_ipsec.h
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
IPSEC_SUPPORT opt_ipsec.h
Add support for stealth forwarding (forwarding packets without touching their ttl). This can be used - in combination with the proper ipfw incantations - to make a firewall or router invisible to traceroute and other exploration tools. This behaviour is controlled by a sysctl variable (net.inet.ip.stealth) and hidden behind a kernel option (IPSTEALTH). Reviewed by: eivind, bde
1999-02-22 18:19:57 +00:00
IPSTEALTH
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
KRPC
LIBALIAS
Introduce API for sequential reads/writes (build/dissect) of mbuf chains. Reviewed by: Ian Dowse <iedowse@maths.tcd.ie>, Bosko Milekic <bmilekic@technokratis.com>, Julian Elischer <julian@elischer.org> and arch@/net@ Obtained from: smbfs
2001-02-24 15:44:30 +00:00
LIBMCHAIN
Add an option (compiled out by default) to profile outoing packets for a number of mbuf chain related parameters e.g. number of mbufs, wasted space. probably will do with further work later. Reviewed by: various
2008-04-29 21:23:21 +00:00
MBUF_PROFILING
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
MBUF_STRESS_TEST
MROUTING opt_mrouting.h
NFSLOCKD
Implement a CPU-affine TCP and UDP connection lookup data structure, struct inpcbgroup. pcbgroups, or "connection groups", supplement the existing inpcbinfo connection hash table, which when pcbgroups are enabled, might now be thought of more usefully as a per-protocol 4-tuple reservation table. Connections are assigned to connection groups base on a hash of their 4-tuple; wildcard sockets require special handling, and are members of all connection groups. During a connection lookup, a per-connection group lock is employed rather than the global pcbinfo lock. By aligning connection groups with input path processing, connection groups take on an effective CPU affinity, especially when aligned with RSS work placement (see a forthcoming commit for details). This eliminates cache line migration associated with global, protocol-layer data structures in steady state TCP and UDP processing (with the exception of protocol-layer statistics; further commit to follow). Elements of this approach were inspired by Willman, Rixner, and Cox's 2006 USENIX paper, "An Evaluation of Network Stack Parallelization Strategies in Modern Operating Systems". However, there are also significant differences: we maintain the inpcb lock, rather than using the connection group lock for per-connection state. Likewise, the focus of this implementation is alignment with NIC packet distribution strategies such as RSS, rather than pure software strategies. Despite that focus, software distribution is supported through the parallel netisr implementation, and works well in configurations where the number of hardware threads is greater than the number of NIC input queues, such as in the RMI XLR threaded MIPS architecture. Another important difference is the continued maintenance of existing hash tables as "reservation tables" -- these are useful both to distinguish the resource allocation aspect of protocol name management and the more common-case lookup aspect. In configurations where connection tables are aligned with hardware hashes, it is desirable to use the traditional lookup tables for loopback or encapsulated traffic rather than take the expense of hardware hashes that are hard to implement efficiently in software (such as RSS Toeplitz). Connection group support is enabled by compiling "options PCBGROUP" into your kernel configuration; for the time being, this is an experimental feature, and hence is not enabled by default. Subject to the limited MFCability of change dependencies in inpcb, and its change to the inpcbinfo init function signature, this change in principle could be merged to FreeBSD 8.x. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-06-06 12:55:02 +00:00
PCBGROUP opt_pcbgroup.h
Provide kernel compile time option to make pf(4) default rule to drop. This is important to secure a small timeframe at boot time, when network is already configured, but pf(4) is not yet. PR: kern/171622 Submitted by: Olivier Cochard-LabbИ <olivier cochard.me>
2012-09-18 11:07:19 +00:00
PF_DEFAULT_TO_DROP opt_pf.h
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
RADIX_MPATH opt_mpath.h
Sort the network options alphabetically. They were mostly alphabetical before.
2008-08-27 01:31:42 +00:00
ROUTETABLES opt_route.h
Several years after initial development, merge prototype support for linking NIC Receive Side Scaling (RSS) to the network stack's connection-group implementation. This prototype (and derived patches) are in use at Juniper and several other FreeBSD-using companies, so despite some reservations about its maturity, merge the patch to the base tree so that it can be iteratively refined in collaboration rather than maintained as a set of gradually diverging patch sets. (1) Merge a software implementation of the Toeplitz hash specified in RSS implemented by David Malone. This is used to allow suitable pcbgroup placement of connections before the first packet is received from the NIC. Software hashing is generally avoided, however, due to high cost of the hash on general-purpose CPUs. (2) In in_rss.c, maintain authoritative versions of RSS state intended to be pushed to each NIC, including keying material, hash algorithm/ configuration, and buckets. Provide software-facing interfaces to hash 2- and 4-tuples for IPv4 and IPv6 using both the RSS standardised Toeplitz and a 'naive' variation with a hash efficient in software but with poor distribution properties. Implement rss_m2cpuid()to be used by netisr and other load balancing code to look up the CPU on which an mbuf should be processed. (3) In the Ethernet link layer, allow netisr distribution using RSS as a source of policy as an alternative to source ordering; continue to default to direct dispatch (i.e., don't try and requeue packets for processing on the 'right' CPU if they arrive in a directly dispatchable context). (4) Allow RSS to control tuning of connection groups in order to align groups with RSS buckets. If a packet arrives on a protocol using connection groups, and contains a suitable hardware-generated hash, use that hash value to select the connection group for pcb lookup for both IPv4 and IPv6. If no hardware-generated Toeplitz hash is available, we fall back on regular PCB lookup risking contention rather than pay the cost of Toeplitz in software -- this is a less scalable but, at my last measurement, faster approach. As core counts go up, we may want to revise this strategy despite CPU overhead. Where device drivers suitably configure NICs, and connection groups / RSS are enabled, this should avoid both lock and line contention during connection lookup for TCP. This commit does not modify any device drivers to tune device RSS configuration to the global RSS configuration; patches are in circulation to do this for at least Chelsio T3 and Intel 1G/10G drivers. Currently, the KPI for device drivers is not particularly robust, nor aware of more advanced features such as runtime reconfiguration/rebalancing. This will hopefully prove a useful starting point for refinement. No MFC is scheduled as we will first want to nail down a more mature and maintainable KPI/KBI for device drivers. Sponsored by: Juniper Networks (original work) Sponsored by: EMC/Isilon (patch update and merge)
2014-03-15 00:57:50 +00:00
RSS opt_rss.h
Re-order list.
1999-08-10 09:42:32 +00:00
SLIP_IFF_OPTS opt_slip.h
Make TCPDEBUG a new-style option.
1997-09-16 18:36:06 +00:00
TCPDEBUG
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
TCPPCAP opt_global.h
Make it possible to statically link SIFTR into the kernel as a new option. Reviewed by: bz Discussed with: lstewart MFC after: 2 weeks
2015-04-29 12:37:45 +00:00
SIFTR
Make the TCP blackbox code committed in r331347 be an optional feature controlled by the TCP_BLACKBOX option. Enable this as part of amd64 GENERIC. For now, leave it disabled on other platforms. Sponsored by: Netflix, Inc.
2018-03-24 12:48:10 +00:00
TCP_BLACKBOX opt_global.h
In the TCP stack, the hhook(9) framework provides hooks for kernel modules to add actions that run when a TCP frame is sent or received on a TCP session in the ESTABLISHED state. In the base tree, this functionality is only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd, and cc_vegas congestion control modules. Presently, we incur overhead to check for hooks each time a TCP frame is sent or received on an ESTABLISHED TCP session. This change adds a new compile-time option (TCP_HHOOK) to determine whether to include the hhook(9) framework for TCP. To retain backwards compatibility, I added the TCP_HHOOK option to every configuration file that already defined "options INET". (Therefore, this patch introduces no functional change. In order to see a functional difference, you need to compile a custom kernel without the TCP_HHOOK option.) This change will allow users to easily exclude this functionality from their kernel, should they wish to do so. Note that any users who use a custom kernel configuration and use one of the congestion control modules listed above will need to add the TCP_HHOOK option to their kernel configuration. Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only) Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
TCP_HHOOK opt_inet.h
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
Implementation of server-side TCP Fast Open (TFO) [RFC7413]. TFO is disabled by default in the kernel build. See the top comment in sys/netinet/tcp_fastopen.c for implementation particulars. Reviewed by: gnn, jch, stas MFC after: 3 days Sponsored by: Verisign, Inc. Differential Revision: https://reviews.freebsd.org/D4350
2015-12-24 19:09:48 +00:00
TCP_RFC7413 opt_inet.h
TCP_RFC7413_MAX_KEYS opt_inet.h
This is an implementation of the client side of TCP Fast Open (TFO) [RFC7413]. It also includes a pre-shared key mode of operation in which the server requires the client to be in possession of a shared secret in order to successfully open TFO connections with that server. The names of some existing fastopen sysctls have changed (e.g., net.inet.tcp.fastopen.enabled -> net.inet.tcp.fastopen.server_enable). Reviewed by: tuexen MFC after: 1 month Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D14047
2018-02-26 02:53:22 +00:00
TCP_RFC7413_MAX_PSKS opt_inet.h
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
TCP_SIGNATURE opt_ipsec.h
Merge the //depot/user/yar/vlan branch into CVS. It contains some collective work by yar, thompsa and myself. The checksum offloading part also involves work done by Mihail Balikov. The most important changes: o Instead of global linked list of all vlan softc use a per-trunk hash. The size of hash is dynamically adjusted, depending on number of entries. This changes struct ifnet, replacing counter of vlans with a pointer to trunk structure. This change is an improvement for setups with big number of VLANs, several interfaces and several CPUs. It is a small regression for a setup with a single VLAN interface. An alternative to dynamic hash is a per-trunk static array with 4096 entries, which is a compile time option - VLAN_ARRAY. In my experiments the array is not an improvement, probably because such a big trunk structure doesn't fit into CPU cache. o Introduce an UMA zone for VLAN tags. Since drivers depend on it, the zone is declared in kern_mbuf.c, not in optional vlan(4) driver. This change is a big improvement for any setup utilizing vlan(4). o Use rwlock(9) instead of mutex(9) for locking. We are the first ones to do this! :) o Some drivers can do hardware VLAN tagging + hardware checksum offloading. Add an infrastructure for this. Whenever vlan(4) is attached to a parent or parent configuration is changed, the flags on vlan(4) interface are updated. In collaboration with: yar, thompsa In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
2006-01-30 13:45:15 +00:00
VLAN_ARRAY opt_vlan.h
Temporary hack for the benefit of the X-Bone project (http://www.isi.edu/xbone). I expect this to go away in due course. Submitted by: Lars Eggert <larse@ISI.EDU>
2000-07-20 00:35:37 +00:00
XBONEHACK
Move DPT related options out of i386 specific files so DPT devices can be used on other PCI (alpha?) machines. Suggested by: several people
1998-01-26 18:31:18 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#
# SCTP
#
SCTP opt_sctp.h
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
SCTP_DEBUG opt_sctp.h # Enable debug printfs
Consistently use <TAB> instead of spaces as option name and file separator.
2009-02-06 10:30:46 +00:00
SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
Consistently use <TAB> instead of spaces as option name and file separator.
2009-02-06 10:30:46 +00:00
SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
Add support for the SCTP_LOCAL_TRACE_BUF options. While there, fix some whitespaces. MFC after: 1 week
2014-06-10 16:11:20 +00:00
SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl
Add support for the SCTP_PR_STREAM_STATUS and SCTP_PR_ASSOC_STATUS socket options. This includes managing the correspoing stat counters. Add the SCTP_DETAILED_STR_STATS kernel option to control per policy counters on every stream. The default is off and only an aggregated counter is available. This is sufficient for the RTCWeb usecase. MFC after: 1 week
2014-08-13 15:50:16 +00:00
SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
#
#
#
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
# Each netgraph node type can be either be compiled into the kernel
# or loaded dynamically. To get the former, include the corresponding
New netgraph node type for Ethernet bridging. No ipfw support yet.
2000-09-01 01:37:13 +00:00
# option below. Each type has its own man page, e.g. ng_async(4).
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH
Make NETGRAPH_DEBUG a kernel option, so that it can't be turned off without hacking source. In collaboration with: ru, julian
2005-05-16 08:25:55 +00:00
NETGRAPH_DEBUG opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_ASYNC opt_netgraph.h
Add a netgraph node to handle ATM LLC encapsulation. This currently handles ethernet (tested) and FDDI (not tested). The main use for this is on ADSL (or other ATM) connections where bridged ethernet is used, PPPoE being a prime example. There is no manual page as yet, I will write one shortly. Reviewed by: harti
2004-03-08 10:54:35 +00:00
NETGRAPH_ATMLLC opt_netgraph.h
Address few style issues pointed out by bde Reviewed by: bde, ru
2004-04-27 16:38:15 +00:00
NETGRAPH_ATM_ATMPIF opt_netgraph.h
NETGRAPH_BLUETOOTH opt_netgraph.h
NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
New netgraph node type, ng_bpf(8). This node type allows you to apply bpf(4) filters to data travelling through a netgraph network.
1999-12-03 21:21:49 +00:00
NETGRAPH_BPF opt_netgraph.h
New netgraph node type for Ethernet bridging. No ipfw support yet.
2000-09-01 01:37:13 +00:00
NETGRAPH_BRIDGE opt_netgraph.h
A node that implements various traffic shaping and rate limiting algorithms (ng_car). Approved by: glebius (mentor)
2007-05-15 16:43:01 +00:00
NETGRAPH_CAR opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_CISCO opt_netgraph.h
Build bits for ng_deflate(4) and ng_pred1(4).
2006-12-29 13:16:43 +00:00
NETGRAPH_DEFLATE opt_netgraph.h
Add ng_device(4) to LINT. Reviewed by: marks Approved by: julian (mentor)
2004-07-20 12:42:54 +00:00
NETGRAPH_DEVICE opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_ECHO opt_netgraph.h
Add options NETGRAPH_EIFACE, which causes ng_eiface.c to be built into the kernel, similar to NETGRAPH_IFACE for ng_iface.c. It appears to have been omitted when added to the kernel.
2004-06-27 02:25:38 +00:00
NETGRAPH_EIFACE opt_netgraph.h
Make the ng_ether(4) node type dynamically loadable like the rest. This means 'options NETGRAPH' is no longer necessary in order to get netgraph-enabled Ethernet interfaces. This supports loading/unloading the ng_ether.ko and attaching/detaching the Ethernet interface in any order. Add two new hooks 'upper' and 'lower' to allow access to the protocol demux engine and the raw device, respectively. This enables bridging to be defined as a netgraph node, if so desired. Reviewed by: freebsd-net@freebsd.org
2000-06-26 23:34:54 +00:00
NETGRAPH_ETHER opt_netgraph.h
Hook up the ether_echo node and fix the man page
2008-12-25 07:34:14 +00:00
NETGRAPH_ETHER_ECHO opt_netgraph.h
Add options NETGRAPH_FEC to hook up ng_fec.c to the LINT build.
2004-06-27 02:36:33 +00:00
NETGRAPH_FEC opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_FRAME_RELAY opt_netgraph.h
/home/brooks/ng_gif.message
2001-09-26 23:50:17 +00:00
NETGRAPH_GIF opt_netgraph.h
NETGRAPH_GIF_DEMUX opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_HOLE opt_netgraph.h
NETGRAPH_IFACE opt_netgraph.h
Add ng_ip_input. A new netgraph node for queuing IP packets into the main IP input processing code.
2001-09-27 21:54:27 +00:00
NETGRAPH_IP_INPUT opt_netgraph.h
Hook up ng_ipfw to kernel build.
2005-02-05 12:15:56 +00:00
NETGRAPH_IPFW opt_netgraph.h
Add option NETGRAPH_KSOCKET.
1999-11-16 23:49:07 +00:00
NETGRAPH_KSOCKET opt_netgraph.h
New L2TP netgraph node type. Obtained from: Packet Design
2002-08-20 21:59:50 +00:00
NETGRAPH_L2TP opt_netgraph.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
NETGRAPH_LMI opt_netgraph.h
Add new options NETGRAPH_MPPC_COMPRESSION and NETGRAPH_MPPC_ENCRYPTION. (Note: NETGRAPH_MPPC_COMPRESSION is disabled until we find a non-proprietary implementation of the MPPC compression algorithm.)
2000-04-09 21:15:23 +00:00
NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
ng_nat - a netgraph(4) node, which does NAT
2005-05-05 23:41:21 +00:00
NETGRAPH_NAT opt_netgraph.h
Attach ng_netflow to kernel build. Approved by: julian (mentor)
2004-09-16 20:35:28 +00:00
NETGRAPH_NETFLOW opt_netgraph.h
Add kernel option NETGRAPH_ONE2MANY.
2000-11-16 16:59:26 +00:00
NETGRAPH_ONE2MANY opt_netgraph.h
New netgraph node ng_patch(4). It performs data modification of packets passing through. Modifications are restricted to a subset of C language operations on unsigned integers of 8, 16, 32 or 64 bit size. These are: set to new value (=), addition (+=), subtraction (-=), multiplication (*=), division (/=), negation (= -), bitwise AND (&=), bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=), shift right (>>=). Several operations are all applied to a packet sequentially in order they were specified by user. Submitted by: Maxim Ignatenko <gelraen.ua at gmail.com> Vadim Goncharov <vadimnuclight at tpu.ru> Discussed with: net@ Approved by: mav (mentor) MFC after: 1 month
2010-06-09 12:25:57 +00:00
NETGRAPH_PATCH opt_netgraph.h
Connect ng_pipe to the default build. Approved by: julian (mentor)
2009-06-23 06:11:04 +00:00
NETGRAPH_PIPE opt_netgraph.h
Add options NETGRAPH_PPP and NETGRAPH_PPPOE.
1999-11-02 22:36:09 +00:00
NETGRAPH_PPP opt_netgraph.h
NETGRAPH_PPPOE opt_netgraph.h
New netgraph node type 'pptpgre': this performs GRE encapsulation for the PPTP protocol as specified in RFC 2637.
1999-12-08 18:55:39 +00:00
NETGRAPH_PPTPGRE opt_netgraph.h
Build bits for ng_deflate(4) and ng_pred1(4).
2006-12-29 13:16:43 +00:00
NETGRAPH_PRED1 opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_RFC1490 opt_netgraph.h
NETGRAPH_SOCKET opt_netgraph.h
Allow ng_split to be compiled in staticly. MFC after: 7 weeks
2001-07-25 00:15:02 +00:00
NETGRAPH_SPLIT opt_netgraph.h
Connect ng_sppp to the build process.
2004-04-24 22:03:02 +00:00
NETGRAPH_SPPP opt_netgraph.h
A netgraph node that can do different manipulations with mbuf_tags(9) on packets. Submitted by: Vadim Goncharov <vadimnuclight tpu.ru> mdoc(7) reviewed by: ru
2006-06-27 12:45:28 +00:00
NETGRAPH_TAG opt_netgraph.h
Attach ng_tcpmss to the build.
2005-06-10 08:05:13 +00:00
NETGRAPH_TCPMSS opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_TEE opt_netgraph.h
NETGRAPH_TTY opt_netgraph.h
NETGRAPH_UI opt_netgraph.h
Add an option for the van Jacobson Compression Netgraph node.
1999-10-25 22:07:30 +00:00
NETGRAPH_VJC opt_netgraph.h
Added option NETGRAPH_VLAN. Submitted by: pluknet
2009-11-11 11:07:30 +00:00
NETGRAPH_VLAN opt_netgraph.h
Make sure Bluetooth stuff can be statically compiled into kernel Submitted by: ps Reviewed by: imp (mentor), ru
2004-04-23 19:48:43 +00:00
Make the netgraph ATM node compilable into the kernel.
2003-06-25 13:21:04 +00:00
# NgATM options
NGATM_ATM opt_netgraph.h
Allow building the NgATM SAAL layer directly into the kernel.
2003-10-27 11:19:08 +00:00
NGATM_ATMBASE opt_netgraph.h
NGATM_SSCOP opt_netgraph.h
NGATM_SSCFU opt_netgraph.h
Allow the ng_uni node (NgATM signalling layer) to be built into the kernel via options NGATM_UNI.
2003-11-07 09:18:53 +00:00
NGATM_UNI opt_netgraph.h
Allow the ATM call control module to be built into the kernel.
2004-08-12 15:01:59 +00:00
NGATM_CCATM opt_netgraph.h
Make the netgraph ATM node compilable into the kernel.
2003-06-25 13:21:04 +00:00
Hook the DRM up to the build and add it to NOTES. Approved by: des
2002-04-28 04:58:40 +00:00
# DRM options
DRM_DEBUG opt_drm.h
Retire 'options TI_PRIVATE_JUMBOS' and replace local jumbo allocator with UMA backed jumbo allocator by default. Previously ti(4) used sf_buf(9) interface for jumbo buffers but it was broken at this moment such that enabling jumbo frame caused instant panic. Due to the nature of sf_buf(9) it heavily relies on VM changes but it seems ti(4) was not received much blessing from VM gurus. I don't understand VM magic and implications used in driver either. Switching to UMA backed jumbo allocator like other network drivers will make jumbo frame work on ti(4). While I'm here, fully allocate all RX buffers. This means ti(4) now uses 512 RX buffer and 1024 mini RX buffers. To use sf_buf(9) interface for jumbo buffers, introduce a new 'options TI_SF_BUF_JUMBO'. If it is proven that sf_buf(9) is better for jumbo buffers, interesting developers can fix the issue in future. ti(4) still needs more bus_dma(9) cleanups and should use separate DMA tag/map for each ring(standard, jumbo, mini, command, event etc) but it should work on all platforms except PAE. Special thanks to Jay[1] who provided complete remote debugging access. Tested by: Jay Borkenhagen <jayb <> braeburn dot org > [1]
2011-11-08 18:23:02 +00:00
TI_SF_BUF_JUMBO opt_ti.h
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
TI_JUMBO_HDRSPLIT opt_ti.h
Move DPT related options out of i386 specific files so DPT devices can be used on other PCI (alpha?) machines. Suggested by: several people
1998-01-26 18:31:18 +00:00
# DPT driver debug flags
Update DPT driver from 1.4.3 to 1.4.5 Submitted by: Simon Shapiro <shimon@simon-shapiro.org>
1998-08-05 00:54:38 +00:00
DPT_MEASURE_PERFORMANCE opt_dpt.h
DPT_RESET_HBA opt_dpt.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
# Misc debug flags. Most of these should probably be replaced with
# 'DEBUG', and then let people recompile just the interesting modules
Rename nlpt to lpt. Remove from ppi.c the old depreciated module stuff. Print info when if_plip can't use interrupts.
1999-02-14 12:00:00 +00:00
# with 'make CC="cc -DDEBUG"'.
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
CLUSTERDEBUG opt_debug_cluster.h
Forgotten options needed to build last ppbus commit. Submitted by: "D. Rock" <rock@wurzelausix.CS.Uni-SB.DE>
1999-01-10 17:41:33 +00:00
DEBUG_1284 opt_ppb_1284.h
VP0_DEBUG opt_vpo.h
Rename nlpt to lpt. Remove from ppi.c the old depreciated module stuff. Print info when if_plip can't use interrupts.
1999-02-14 12:00:00 +00:00
LPT_DEBUG opt_lpt.h
Replace DEBUG by PLIP_DEBUG option
1999-01-23 17:07:49 +00:00
PLIP_DEBUG opt_plip.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
LOCKF_DEBUG opt_debug_lockf.h
SI_DEBUG opt_debug_si.h
Make IFMEDIA_DEBUG a kernel option. Sponsored by: Nginx, Inc.
2015-04-21 10:35:23 +00:00
IFMEDIA_DEBUG opt_ifmedia.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
Options cleanup. * GC unused options * Move options that exist on all architectures to conf/options * Add missing options to LINT * Sort undocumented options list in LINT Reviewed by: green
1999-11-06 23:41:10 +00:00
# Fb options
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
Terminate commit for the Intel PIIX4 SMBus support. Already committed files are sys/pci/intpm* Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
1999-01-25 19:34:27 +00:00
# ppbus related options
PERIPH_1284 opt_ppb_1284.h
DONTPROBE_1284 opt_ppb_1284.h
# smbus related options
ENABLE_ALART opt_intpm.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
Throw DEBUG and DIAGNOSTIC in opt_global.h
1998-02-06 12:41:39 +00:00
# These cause changes all over the kernel
Options cleanup. * GC unused options * Move options that exist on all architectures to conf/options * Add missing options to LINT * Sort undocumented options list in LINT Reviewed by: green
1999-11-06 23:41:10 +00:00
BLKDEV_IOSIZE opt_global.h
Fix typo for BURN_BRIDGES' file, it should be opt_global.h
2003-07-11 17:04:37 +00:00
BURN_BRIDGES opt_global.h
Throw DEBUG and DIAGNOSTIC in opt_global.h
1998-02-06 12:41:39 +00:00
DEBUG opt_global.h
Add 'options DEBUG_LOCKS', which stores extra information in struct lock, and add some macros and function parameters to make sure that the information get to the point where it can be put in the lock structure. While I'm here, add DEBUG_VFS_LOCKS to LINT.
1999-01-20 14:49:12 +00:00
DEBUG_LOCKS opt_global.h
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
DEBUG_VFS_LOCKS opt_global.h
MFp4: Sort a couple options alphabetically.
2008-08-26 07:28:27 +00:00
DFLTPHYS opt_global.h
Throw DEBUG and DIAGNOSTIC in opt_global.h
1998-02-06 12:41:39 +00:00
DIAGNOSTIC opt_global.h
Add back in INVARIANT_SUPPORT and expand the comments in NOTES about it to include the reasoning Eivind justifiably thwapped me over the head with.
2001-02-24 19:03:18 +00:00
INVARIANT_SUPPORT opt_global.h
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
INVARIANTS opt_global.h
KASSERT: Make runtime optionality optional Add an option, KASSERT_PANIC_OPTIONAL, that allows runtime KASSERT() behavior changes. When this option is not enabled, code that allows KASSERTs to become optional is not enabled, and all violated assertions cause termination. The runtime KASSERT behavior was added in r243980. One important distinction here is that panic has __dead2 ("attribute((noreturn))"), while kassert_panic does not. Static analyzers like Coverity understand __dead2. Without it, KASSERTs go misunderstood, resulting in many false positives that result from violation of program invariants. Reviewed by: jhb, jtl, np, vangyzen Relnotes: yes Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D16835
2018-08-22 22:19:42 +00:00
KASSERT_PANIC_OPTIONAL opt_global.h
Add the possibility to specify from kernel configs MAXCPU value. This patch is going to help in cases like mips flavours where you want a more granular support on MAXCPU. No MFC is previewed for this patch. Tested by: pluknet Approved by: re (kib)
2011-07-19 00:37:24 +00:00
MAXCPU opt_global.h
Rename VM_NDOMAIN into MAXMEMDOM and move it into machine/param.h in order to match the MAXCPU concept. The change should also be useful for consolidation and consistency. Sponsored by: EMC / Isilon storage division Obtained from: jeff Reviewed by: alc
2013-05-07 22:46:24 +00:00
MAXMEMDOM opt_global.h
MFp4: Sort a couple options alphabetically.
2008-08-26 07:28:27 +00:00
MAXPHYS opt_global.h
Move the MSIZE and MCLSHIFT options out of the undocumented section in NOTES. Add some comments about the potential problems associated with NIC driver modules and changing these options. Fix sorting problems in sys/conf/options with the MSIZE and MCLSHIFT options. Reviewed by: bde
2002-07-11 04:15:53 +00:00
MCLSHIFT opt_global.h
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
MUTEX_NOINLINE opt_global.h
MUTEX_PROFILING has been generalized to LOCK_PROFILING. We now profile wait (time waited to acquire) and hold times for *all* kernel locks. If the architecture has a system synchronized TSC, the profiling code will use that - thereby minimizing profiling overhead. Large chunks of profiling code have been moved out of line, the overhead measured on the T1 for when it is compiled in but not enabled is < 1%. Approved by: scottl (standing in for mentor rwatson) Reviewed by: des and jhb
2006-11-11 03:18:07 +00:00
LOCK_PROFILING opt_global.h
Further improvements to LOCK_PROFILING: - Fix missing initialization in kern_rwlock.c causing bogus times to be collected - Move updates to the lock hash to after the lock is released for spin mutexes, sleep mutexes, and sx locks - Add new kernel build option LOCK_PROFILE_FAST - only update lock profiling statistics when an acquisition is contended. This reduces the overhead of LOCK_PROFILING to increasing system time by 20%-25% which on "make -j8 kernel-toolchain" on a dual woodcrest is unmeasurable in terms of wall-clock time. Contrast this to enabling lock profiling without LOCK_PROFILE_FAST and I see a 5x-6x slowdown in wall-clock time.
2007-02-27 06:42:05 +00:00
LOCK_PROFILING_FAST opt_global.h
Move the MSIZE and MCLSHIFT options out of the undocumented section in NOTES. Add some comments about the potential problems associated with NIC driver modules and changing these options. Fix sorting problems in sys/conf/options with the MSIZE and MCLSHIFT options. Reviewed by: bde
2002-07-11 04:15:53 +00:00
MSIZE opt_global.h
o Introduce "options REGRESSION", a kernel option which enables interfaces and functionality intended for use during correctness and regression testing. Features enabled by "options REGRESSION" may in and of themselves introduce security or correctness problems if used improperly, and so are not intended for use in production systems, only in testing environments. Obtained from: TrustedBSD Project
2001-04-11 19:29:24 +00:00
REGRESSION opt_global.h
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
RWLOCK_NOINLINE opt_global.h
Optimize sx locks to use simple atomic operations for the common cases of obtaining and releasing shared and exclusive locks. The algorithms for manipulating the lock cookie are very similar to that rwlocks. This patch also adds support for exclusive locks using the same algorithm as mutexes. A new sx_init_flags() function has been added so that optional flags can be specified to alter a given locks behavior. The flags include SX_DUPOK, SX_NOWITNESS, SX_NOPROFILE, and SX_QUITE which are all identical in nature to the similar flags for mutexes. Adaptive spinning on select locks may be enabled by enabling the ADAPTIVE_SX kernel option. Only locks initialized with the SX_ADAPTIVESPIN flag via sx_init_flags() will adaptively spin. The common cases for sx_slock(), sx_sunlock(), sx_xlock(), and sx_xunlock() are now performed inline in non-debug kernels. As a result, <sys/sx.h> now requires <sys/lock.h> to be included prior to <sys/sx.h>. The new kernel option SX_NOINLINE can be used to disable the aforementioned inlining in non-debug kernels. The size of struct sx has changed, so the kernel ABI is probably greatly disturbed. MFC after: 1 month Submitted by: attilio Tested by: kris, pjd
2007-03-31 23:23:42 +00:00
SX_NOINLINE opt_global.h
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
VFS_BIO_DEBUG opt_global.h
Try to dynamically size the VM_KMEM_SIZE (but is still able to be overridden in a way identically as before.) I had problems with the system properly handling the number of vnodes when there is alot of system memory, and the default VM_KMEM_SIZE. Two new options "VM_KMEM_SIZE_SCALE" and "VM_KMEM_SIZE_MAX" have been added to support better auto-sizing for systems with greater than 128MB. Add some accouting for vm_zone memory allocations, and provide properly for vm_zone allocations out of the kmem_map. Also move the vm_zone allocation stats to the VM OID tree from the KERN OID tree.
1998-02-23 07:42:43 +00:00
# These are VM related options
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
VM_KMEM_SIZE opt_vm.h
VM_KMEM_SIZE_SCALE opt_vm.h
Try to dynamically size the VM_KMEM_SIZE (but is still able to be overridden in a way identically as before.) I had problems with the system properly handling the number of vnodes when there is alot of system memory, and the default VM_KMEM_SIZE. Two new options "VM_KMEM_SIZE_SCALE" and "VM_KMEM_SIZE_MAX" have been added to support better auto-sizing for systems with greater than 128MB. Add some accouting for vm_zone memory allocations, and provide properly for vm_zone allocations out of the kmem_map. Also move the vm_zone allocation stats to the VM OID tree from the KERN OID tree.
1998-02-23 07:42:43 +00:00
VM_KMEM_SIZE_MAX opt_vm.h
Add configuration knobs for the superpage reservation system. Initially, the reservation will only be enabled on amd64.
2007-12-27 16:45:39 +00:00
VM_NRESERVLEVEL opt_vm.h
VM_LEVEL_0_ORDER opt_vm.h
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
NO_SWAPPING opt_vm.h
Add a new kernel option, MALLOC_MAKE_FAILURES, which compiles in a debugging feature causing M_NOWAIT allocations to fail at a specified rate. This can be useful for detecting poor handling of M_NOWAIT: the most frequent problems I've bumped into are unconditional deference of the pointer even though it's NULL, and hangs as a result of a lost event where memory for the event couldn't be allocated. Two sysctls are added: debug.malloc.failure_rate How often to generate a failure: if set to 0 (default), this feature is disabled. Otherwise, the frequency of failures -- I've been using 10 (one in ten mallocs fails), but other popular settings might be much lower or much higher. debug.malloc.failure_count Number of times a coerced malloc failure has occurred as a result of this feature. Useful for tracking what might have happened and whether failures are being generated. Useful possible additions: tying failure rate to malloc type, printfs indicating the thread that experienced the coerced failure. Reviewed by: jeffr, jhb
2003-03-26 20:18:40 +00:00
MALLOC_MAKE_FAILURES opt_vm.h
Turn #ifdef LOOKUP_SHARED into #ifndef LOOKUP_EXCLUSIVE to enable this behavior by default. Also, change the options line to reflect this. If there are no problems reported this will become the only behavior and the knob will be removed in a month or so. Demanded by: obrien
2002-04-09 05:14:17 +00:00
MALLOC_PROFILE opt_vm.h
Add MALLOC_DEBUG_MAXZONES debug malloc(9) option to use multiple uma zones for each malloc bucket size. The purpose is to isolate different malloc types into hash classes, so that any buffer overruns or use-after-free will usually only affect memory from malloc types in that hash class. This is purely a debugging tool; by varying the hash function and tracking which hash class was corrupted, the intersection of the hash classes from each instance will point to a single malloc type that is being misused. At this point inspection or memguard(9) can be used to catch the offending code. Add MALLOC_DEBUG_MAXZONES=8 to -current GENERIC configuration files. The suggestion to have this on by default came from Kostik Belousov on -arch. This code is based on work by Ron Steinke at Isilon Systems. Reviewed by: -arch (mostly silence) Reviewed by: zml Approved by: zml (mentor)
2010-07-28 15:36:12 +00:00
MALLOC_DEBUG_MAXZONES opt_vm.h
document some VM paging options for cache sizes: PQ_NOOPT no coloring PQ_LARGECACHE used for 512k/16k cache PQ_HUGECACHE used for 1024k/16k cache
1998-06-30 08:01:30 +00:00
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
# The MemGuard replacement allocator used for tamper-after-free detection
DEBUG_MEMGUARD opt_vm.h
Add buffer corruption protection (RedZone) for kernel's malloc(9). It detects both: buffer underflows and buffer overflows bugs at runtime (on free(9) and realloc(9)) and prints backtraces from where memory was allocated and from where it was freed. Tested by: kris
2006-01-31 11:09:21 +00:00
# The RedZone malloc(9) protection
DEBUG_REDZONE opt_vm.h
Move the "generic" SMP options from options.i386 to conf/options. This has the useful side-effect of ensuring that opt_smp.h is always generated, so we can assume it will always be available. Prompted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-12-19 23:07:16 +00:00
# Standard SMP options
Add an EARLY_AP_STARTUP option to start APs earlier during boot. Currently, Application Processors (non-boot CPUs) are started by MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until SI_SUB_SMP at which point they are released to run kernel threads. SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter the scheduler and start running threads until fairly late in the boot. This change moves SI_SUB_SMP up to just before software interrupt threads are created allowing the APs to start executing kernel threads much sooner (before any devices are probed). This allows several initialization routines that need to perform initialization on all CPUs to now perform that initialization in one step rather than having to defer the AP initialization to a second SYSINIT run at SI_SUB_SMP. It also permits all CPUs to be available for handling interrupts before any devices are probed. This last feature fixes a problem on with interrupt vector exhaustion. Specifically, in the old model all device interrupts were routed onto the boot CPU during boot. Later after the APs were released at SI_SUB_SMP, interrupts were redistributed across all CPUs. However, several drivers for multiqueue hardware allocate N interrupts per CPU in the system. In a system with many CPUs, just a few drivers doing this could exhaust the available pool of interrupt vectors on the boot CPU as each driver was allocating N * mp_ncpu vectors on the boot CPU. Now, drivers will allocate interrupts on their desired CPUs during boot meaning that only N interrupts are allocated from the boot CPU instead of N * mp_ncpu. Some other bits of code can also be simplified as smp_started is now true much earlier and will now always be true for these bits of code. This removes the need to treat the single-CPU boot environment as a special case. As a transition aid, the new behavior is available under a new kernel option (EARLY_AP_STARTUP). This will allow the option to be turned off if need be during initial testing. I plan to enable this on x86 by default in a followup commit in the next few days and to have all platforms moved over before 11.0. Once the transition is complete, the option will be removed along with the !EARLY_AP_STARTUP code. These changes have only been tested on x86. Other platform maintainers are encouraged to port their architectures over as well. The main things to check for are any uses of smp_started in MD code that can be simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in the EARLY_AP_STARTUP case (e.g. the interrupt shuffling). PR: kern/199321 Reviewed by: markj, gnn, kib Sponsored by: Netflix
2016-05-14 18:22:52 +00:00
EARLY_AP_STARTUP opt_global.h
Move the "generic" SMP options from options.i386 to conf/options. This has the useful side-effect of ensuring that opt_smp.h is always generated, so we can assume it will always be available. Prompted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-12-19 23:07:16 +00:00
SMP opt_global.h
Move VM_NUMA_ALLOC and DEVICE_NUMA under the single global config option NUMA. Sponsored by: Netflix, Dell/EMC Isilon Discussed with: jhb
2018-01-14 03:36:03 +00:00
NUMA opt_global.h
make sys/netkey/key{,_debug}.c compile. I believe it works but not tested. I'll polish the code later on.
1998-02-27 10:02:49 +00:00
Make the size of the msgbuf (dmesg) a "normal" option.
1998-05-19 08:58:53 +00:00
# Size of the kernel message buffer
MSGBUF_SIZE opt_msgbuf.h
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
convert some nfs tunables to options, these are: NFS_MINATTRTIMO VREG attrib cache timeout in sec NFS_MAXATTRTIMO NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec NFS_MAXDIRATTRTIMO NFS_GATHERDELAY Default write gather delay (msec) NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this NFS_WDELAYHASHSIZ and with this NFS_MUIDHASHSIZ Tune the size of nfsmount with this NFS_NOSERVER (already documented in LINT) NFS_DEBUG turn on NFS debugging also, because NFS_ROOT is used by very different files, it has been renamed to opt_nfsroot.h instead of the old opt_nfs.h....
1998-06-30 03:01:37 +00:00
# NFS options
NFS_MINATTRTIMO opt_nfs.h
NFS_MAXATTRTIMO opt_nfs.h
NFS_MINDIRATTRTIMO opt_nfs.h
NFS_MAXDIRATTRTIMO opt_nfs.h
NFS_DEBUG opt_nfs.h
Updated options for the Bt848/Bt878 driver This includes the BKTR_430_FX_MODE and BKTR_SIS_VIA_MODE options which make Bt878/879 cards work better on 430FX and old SiS/VIA/OPTi boards
1999-05-26 13:24:35 +00:00
# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
OVERRIDE_CARD opt_bktr.h
OVERRIDE_TUNER opt_bktr.h
OVERRIDE_DBX opt_bktr.h
OVERRIDE_MSP opt_bktr.h
BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
Add new bktr options
2000-10-17 07:59:56 +00:00
BROOKTREE_ALLOC_PAGES opt_bktr.h
BKTR_OVERRIDE_CARD opt_bktr.h
BKTR_OVERRIDE_TUNER opt_bktr.h
BKTR_OVERRIDE_DBX opt_bktr.h
BKTR_OVERRIDE_MSP opt_bktr.h
BKTR_SYSTEM_DEFAULT opt_bktr.h
BKTR_ALLOC_PAGES opt_bktr.h
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
BKTR_USE_PLL opt_bktr.h
BKTR_GPIO_ACCESS opt_bktr.h
BKTR_NO_MSP_RESET opt_bktr.h
BKTR_430_FX_MODE opt_bktr.h
BKTR_SIS_VIA_MODE opt_bktr.h
Major rework of the iicbus/smbus framework: - VIA chipset SMBus controllers added - alpm driver updated - Support for dynamic modules added - bktr FreeBSD smbus updated but not tested - cleanup
2002-03-23 15:49:15 +00:00
BKTR_USE_FREEBSD_SMBUS opt_bktr.h
Add a overhaul of the soundchip initialization for the MSP34xx chipsets found only many tv-cards. We currently use more ore less evil hacks (slow_msp_audio sysctl) to configure the various variants of these chips in order to have stereo autodetection work. Nevertheless, this doesn't always work even though it _should_, according to the specs. This is, for example, the case for some popular Hauppauge models sold sold in Germany. However, the Linux driver always worked for me and others. Looking at the sourcecode you will find that the linux-driver uses a very much enhanced approach to program the various msp34xx chipset variants, which is also found in the specs for these chips. This is a port of the Linux MSP34xx code, written by Gerd Knorr <kraxel@bytesex.org>, who agreed to re-release his code under a BSD license for this port. A new config option "BKTR_NEW_MSP34XX_DRIVER" is added, which is required to enable the new driver. Otherwise the old code is used. The msp34xx.c file is diff-reduced to the linux-driver to make later modifications easier, thus it doesn't follow style(9) in most cases. Approved by: roger (committing this, no time to test/review), keichii (code review)
2003-08-12 09:45:34 +00:00
BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
Renamed BT848[SG]CAPAREA to BT848_[SG]CAPAREA. Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>. In kernel configuration file add options OVERRIDE_CARD=2 options OVERRIDE_TUNER=11 options BKTR_USE_PLL Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-08-31 18:35:06 +00:00
Allow UART_POLL_FREQ to be set as a kernel option as well as via tunable (the code was already set up for this, just needs to be in conf/options). Also, if reporting that polling is being used, report the frequency too.
2013-08-19 15:51:30 +00:00
# Options for uart(4)
Add support for using uart(4) for pulse capturing for the Pulse Per Second (PPS) timing interface. The support is non-optional and by default uses the DCD line signal as the pulse input. A compile-time option (UART_PPS_ON_CTS) can be used to have uart(4) use the CTS line signal. Include <sys/timepps.h> in uart_bus.h to avoid having to add the inclusion of that header in all source files. Reviewed by: phk
2003-09-11 23:06:42 +00:00
UART_PPS_ON_CTS opt_uart.h
Allow UART_POLL_FREQ to be set as a kernel option as well as via tunable (the code was already set up for this, just needs to be in conf/options). Also, if reporting that polling is being used, report the frequency too.
2013-08-19 15:51:30 +00:00
UART_POLL_FREQ opt_uart.h
uart(4) - make the 8250 uart baudrate tolerance build time tweakable. It turns out on a 16550 w/ a 25MHz SoC reference clock you get a little over 3% error at 115200 baud, which causes this to fail. Just .. cope. Things cope these days. Default to 30 (3.0%) as before, but allow UART_DEV_TOLERANCE_PCT to be set at build time to change that.
2015-11-18 06:24:21 +00:00
UART_DEV_TOLERANCE_PCT opt_uart.h
Add support for using uart(4) for pulse capturing for the Pulse Per Second (PPS) timing interface. The support is non-optional and by default uses the DCD line signal as the pulse input. A compile-time option (UART_PPS_ON_CTS) can be used to have uart(4) use the CTS line signal. Include <sys/timepps.h> in uart_bus.h to avoid having to add the inclusion of that header in all source files. Reviewed by: phk
2003-09-11 23:06:42 +00:00
Add BUS_DEBUG option in opt_bus.h
1998-10-28 08:37:10 +00:00
# options for bus/device framework
BUS_DEBUG opt_bus.h
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
# options for USB support
USB_DEBUG opt_usb.h
Add missing USB_HOST_ALIGN option. Approved by: thompsa (mentor)
2011-02-12 21:17:38 +00:00
USB_HOST_ALIGN opt_usb.h
Allow the USB_REQ_DEBUG to be enabled in the kernel conf. Requested by: HPS
2010-05-13 20:48:39 +00:00
USB_REQ_DEBUG opt_usb.h
Allow the default USB template to be specified at compile time.
2013-05-03 08:19:09 +00:00
USB_TEMPLATE opt_usb.h
Rename option USBVERBOSE to USB_VERBOSE for 2 reasons: 1. USB_VERBOSE is more consistent with USB_DEBUG, 2. sys/dev/usb/usb_device.c uses option USB_VERBOSE and not USBVERBOSE. POLA with the USBVERBOSE option as it's found in 7-STABLE has been considered but found insignificant in the face of the USB stack overhaul. Approved by: re (kensmith)
2009-07-12 04:48:47 +00:00
USB_VERBOSE opt_usb.h
Optimise allocation of USB DMA structures. By default don't double map allocations if only one element should be allocated per page cache. Make one allocation per element compile time configurable. Fix a comment while at it. Suggested by: ian @ MFC after: 1 week
2015-02-02 11:32:15 +00:00
USB_DMA_SINGLE_ALLOC opt_usb.h
Merge usb changes for Gateworks Cambria boards: o add support to byte swap EHCI descriptor contents; the IXP435 has dual-EHCI controllers integral but descriptor contents are in big-endian format; this support is configured with the USB_EHCI_BIG_ENDIAN_DESC option and enabled with EHCI_SCFLG_BIGEDESC o clean up EHCI USBMODE register setup during init; add #defines for bit values o split debug support out into a new file and enable use through ddb o while here remove a bunch of lingering netbsd-isms Reviewed by: imp
2008-12-20 03:02:32 +00:00
USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
Add U3G_DEBUG to LINT
2008-10-24 07:16:13 +00:00
U3G_DEBUG opt_u3g.h
Move UKBD_DFLT_KEYMAP into the options file since USB is machine independent. This allows the ukbd0 driver to compile on the Alpha. Approved by: o`brien (in principle)
2000-05-09 18:23:38 +00:00
UKBD_DFLT_KEYMAP opt_ukbd.h
Make interrupt pipe interval time configurable. - Add kernel options: {UPLCOM,UVSCOM}_INTR_INTERVAL - Add sysctl variables: 'hw.usb.{uplcom,uvscom}.interval' MFC after: 1 week
2003-11-16 12:26:10 +00:00
UPLCOM_INTR_INTERVAL opt_uplcom.h
Fix device freeze to reduce output packet size. And make this value configurable by kernel config or sysctl.
2003-03-09 11:50:27 +00:00
UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
Make interrupt pipe interval time configurable. - Add kernel options: {UPLCOM,UVSCOM}_INTR_INTERVAL - Add sysctl variables: 'hw.usb.{uplcom,uvscom}.interval' MFC after: 1 week
2003-11-16 12:26:10 +00:00
UVSCOM_INTR_INTERVAL opt_uvscom.h
Config glue for 'pseudo-device vinum'
1998-12-28 16:31:26 +00:00
rtwn(4), urtwn(4): merge common code, add support for 11ac devices. All devices: - add support for rate adaptation via ieee80211_amrr(9); - use short preamble for transmitted frames when needed; - multi-bss support: * for RTL8821AU: 2 VAPs at the same time; * other: 1 any VAP + 1 sta VAP. RTL8188CE: - fix IQ calibration bug (reason of significant speed degradation); - add h/w crypto acceleration support. USB: - A-MPDU Tx support; - short GI support; Other: - add support for RTL8812AU / RTL8821AU chipsets (a/b/g/n only; no ac yet); - split merged code into subparts: * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*) * common (if_rtwn*) * chip-specific (rtl*/*) - various other bugfixes. Due to code reorganization, module names / requirements were changed too: urtwn urtwnfw -> rtwn rtwn_usb rtwnfw rtwn rtwnfw -> rtwn rtwn_pci rtwnfw Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU. Tested by: kevlo, garga, Peter Garshtja <peter.garshtja@ambient-md.com>, Kevin McAleavey <kevin.mcaleavey@knosproject.com>, Ilias-Dimitrios Vrachnis <id@vrachnis.com>, <otacilio.neto@bsd.com.br> Relnotes: yes
2016-10-17 20:38:24 +00:00
# options for the Realtek rtwn driver
RTWN_DEBUG opt_rtwn.h
RTWN_WITHOUT_UCODE opt_rtwn.h
urtwn: add an option to compile the driver without firmware specific code - Add URTWN_WITHOUT_UCODE option (will disable any firmware specific code when set). - Do not exclude the driver from build when MK_SOURCELESS_UCODE is set (URTWN_WITHOUT_UCODE will be enforced unconditionally). - Do not abort initialization when firmware cannot be loaded; behave like the URTWN_WITHOUT_UCODE option was set. - Drop some unused variables from urtwn_softc structure. Tested with RTL8188EU and RTL8188CUS in HOSTAP and STA modes. Reviewed by: kevlo Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D4849
2016-02-22 00:48:53 +00:00
Add an INIT_PATH option to allow the init_path (for sys/kern/init_main.c) to be customised in an embedded system which doesn't want to run either init of sysinstall.
1999-05-05 11:24:15 +00:00
# Embedded system options
Remove all redundant option file names that don't hurt readability.
2005-12-12 10:15:11 +00:00
INIT_PATH
Major lobotomy of config(8). The config kernel mumble mumble line has been obsoleted and removed and with it went all knowledge of devices on the part of config. You can still configure a root device (which is used if you give the "-r" flag) but now with an option: options ROOTDEVNAME=\"da0s2e\" The string is parsed by the same code as at the "boot -a" prompt. At the same time, make the "boot -a" prompt both more able and more informative. ALPHA/PC98 people: You will have to adapt a few simple changes (defining rootdev and dumpdev somewhere else) before config works for you again, sorry, but it's all in the name of progress.
1999-05-09 16:46:01 +00:00
Remove all redundant option file names that don't hurt readability.
2005-12-12 10:15:11 +00:00
ROOTDEVNAME
Floppy driver options moved to conf/options.
1999-06-05 13:57:10 +00:00
Revert previous change to sys/conf/options & associated notes so builds can resume while I investigate what I had missed.
2017-04-07 21:06:50 +00:00
FDC_DEBUG opt_fdc.h
Import simple driver for a parallel port radio clock which receives the German legal time (commonly available in Europe). Submitted by: Sascha Schumann <sascha@schumann.cx>
2000-01-19 18:17:25 +00:00
PCFCLOCK_VERBOSE opt_pcfclock.h
PCFCLOCK_MAX_RETRIES opt_pcfclock.h
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
KTR opt_global.h
- Add options ALQ and KTR_ALQ.
2002-09-22 07:14:27 +00:00
KTR_ALQ opt_ktr.h
- Remove much of the inlining of the KTR tracepoints into a ktr_tracepoint() function declared in kern_ktr.c. The only inline checks left are the checks that compare KTR_COMPILE with the supplied mask and thus should be optimized away into either nothing or a direct call to ktr_tracepoint(). - Move several KTR-related options to opt_ktr.h now that they are only needed by kern_ktr.c and not by ktr.h. - Add in the ktr_verbose functionality if KTR_EXTEND is turned on. If the global variable 'ktr_verbose' is non-zero, then KTR messages will be dumped to the console. This variable can be set by either kernel code or via the 'debug.ktr_verbose' sysctl. It defaults to off unless the KTR_VERBOSE kernel option is specified in which case it defaults to on. This can be useful when the machine locks up spinning in a loop with interrupts disabled as you might be able to see what it is doing when it locks up. Requested by: phk
2000-11-07 01:49:48 +00:00
KTR_MASK opt_ktr.h
KTR_CPUMASK opt_ktr.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
KTR_COMPILE opt_global.h
allow for large KTR_ENTRIES values by allocating ktr_buf using malloc(9) Only during very early boot, before malloc(9) is functional (SI_SUB_KMEM), the static ktr_buf_init is used. Size of the static buffer is determined by a new kernel option KTR_BOOT_ENTRIES. Its default value is 1024. This commit builds on top of r243046. Reviewed by: alc MFC after: 17 days
2013-02-03 09:57:39 +00:00
KTR_BOOT_ENTRIES opt_global.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
KTR_ENTRIES opt_global.h
- Remove much of the inlining of the KTR tracepoints into a ktr_tracepoint() function declared in kern_ktr.c. The only inline checks left are the checks that compare KTR_COMPILE with the supplied mask and thus should be optimized away into either nothing or a direct call to ktr_tracepoint(). - Move several KTR-related options to opt_ktr.h now that they are only needed by kern_ktr.c and not by ktr.h. - Add in the ktr_verbose functionality if KTR_EXTEND is turned on. If the global variable 'ktr_verbose' is non-zero, then KTR messages will be dumped to the console. This variable can be set by either kernel code or via the 'debug.ktr_verbose' sysctl. It defaults to off unless the KTR_VERBOSE kernel option is specified in which case it defaults to on. This can be useful when the machine locks up spinning in a loop with interrupts disabled as you might be able to see what it is doing when it locks up. Requested by: phk
2000-11-07 01:49:48 +00:00
KTR_VERBOSE opt_ktr.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
WITNESS opt_global.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
WITNESS_KDB opt_witness.h
Add option WITNESS_NO_VNODE to suppress printing LORs between VNODE locks. To support this, VNODE locks are created with the LK_IS_VNODE flag. This flag is propagated down using the LO_IS_VNODE flag. Note that WITNESS still records the LOR. Only the printing and the optional entering into the kernel debugger is bypassed with the WITNESS_NO_VNODE option.
2013-05-09 16:28:18 +00:00
WITNESS_NO_VNODE opt_witness.h
Add and document the WITNESS_SKIPSPIN and WITNESS_DDB kernel options.
2000-10-27 03:00:28 +00:00
WITNESS_SKIPSPIN opt_witness.h
Make the witness lock limit an option.
2014-08-03 05:00:43 +00:00
WITNESS_COUNT opt_witness.h
opensolaris code: translate INVARIANTS to DEBUG and ZFS_DEBUG Do this by forcing inclusion of sys/cddl/compat/opensolaris/sys/debug_compat.h via -include option into all source files from OpenSolaris. Note that this -include option must always be after -include opt_global.h. Additionally, remove forced definition of DEBUG for some modules and fix their build without DEBUG. Also, meaning of DEBUG was overloaded to enable WITNESS support for some OpenSolaris (primarily ZFS) locks. Now this overloading is removed and that use of DEBUG is replaced with a new option OPENSOLARIS_WITNESS. MFC after: 17 days
2013-08-06 15:51:56 +00:00
OPENSOLARIS_WITNESS opt_global.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Merge rest piece of ACPI driver.To activate acpi driver ,add device acpi line. Merge finished. But still experimental phase.Need more hack! Obtained from:ACPI for FreeBSD project
2000-08-31 15:34:54 +00:00
# options for ACPI support
ACPI_DEBUG opt_acpi.h
Catch up with r193750 (OsdSynch.c locking changes): - Preallocate some memory for ACPI tasks early enough. We cannot use malloc(9) any more because spin mutex may be held here. The reserved memory can be tuned via debug.acpi.max_tasks tunable or ACPI_MAX_TASKS in kernel configuration. The default is 32 tasks. - Implement a custom taskqueue_fast to wrap the new memory allocation. This implementation is not the fastest in the world but we are being conservative here.
2009-06-10 22:54:20 +00:00
ACPI_MAX_TASKS opt_acpi.h
Add OS layer ACPI mutex and threading support. - Temporary fix a bug of Intel ACPI CA core code. - Add OS layer ACPI mutex support. This can be disabled by specifying option ACPI_NO_SEMAPHORES. - Add ACPI threading support. Now that we have a dedicate taskqueue for ACPI tasks and more ACPI task threads can be created by specifying option ACPI_MAX_THREADS. - Change acpi_EvaluateIntoBuffer() behavior slightly to reuse given caller's buffer unless AE_BUFFER_OVERFLOW occurs. Also CM battery's evaluations were changed to use acpi_EvaluateIntoBuffer(). - Add new utility function acpi_ConvertBufferToInteger(). - Add simple locking for CM battery and temperature updating. - Fix a minor problem on EC locking. - Make the thermal zone polling rate to be changeable. - Change minor things on AcpiOsSignal(); in ACPI_SIGNAL_FATAL case, entering Debugger is easier to investigate the problem rather than panic.
2001-12-22 16:05:41 +00:00
ACPI_MAX_THREADS opt_acpi.h
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
ACPI_DMAR opt_acpi.h
Add DEV_ACPI to opt_acpi.h to be used to detect when ACPI is enabled in the kernel.
2015-05-05 14:19:22 +00:00
DEV_ACPI opt_acpi.h
Add refcounts to the "global" DEVFS inode slots, this allows us to recycle inodes after a destroy_dev() but not until all mounts have picked up the change. Add support for an overflow table for DEVFS inodes. The static table defaults to 1024 inodes, if that fills, an overflow table of 32k inodes is allocated. Both numbers can be changed at compile time, the size of the overflow table also with the sysctl vfs.devfs.noverflow. Use atomic instructions to barrier between make_dev()/destroy_dev() and the mounts. Add lockmgr() locking of directories for operations accessing or modifying the directory TAILQs. Various nitpicking here and there.
2000-09-06 11:26:43 +00:00
Make the ISAPNP code optional and only enable it on i386 and pc98 (used for CBUS-PNP cards there) by default, as there are no amd64 and sparc64 machines with ISA slots and which therefore could make use of this code known to exist. For sparc64 this additionally allows to get rid of the compat shims for in{b,w,l}()/out{b,w,l}() etc and the associated hacks. OK'ed by: imp, peter
2006-06-12 21:07:13 +00:00
# ISA support
DEV_ISA opt_isa.h
ISAPNP opt_isa.h
Turn '#if NSNP > 0' into an option.
2001-01-29 09:43:36 +00:00
# various 'device presence' options.
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
DEV_BPF opt_bpf.h
Add CARP (Common Address Redundancy Protocol), which allows multiple hosts to share an IP address, providing high availability and load balancing. Original work on CARP done by Michael Shalayeff, with many additions by Marco Pfatschbacher and Ryan McBride. FreeBSD port done solely by Max Laier. Patch by: mlaier Obtained from: OpenBSD (mickey, mcbride)
2005-02-22 13:04:05 +00:00
DEV_CARP opt_carp.h
Move DEV_ entries scattered to their common section. Add DEV_PCI.
2015-01-17 02:17:57 +00:00
DEV_NETMAP opt_global.h
DEV_PCI opt_pci.h
DEV_PF opt_pf.h
DEV_PFLOG opt_pf.h
DEV_PFSYNC opt_pf.h
Add DEV_RANDOM pseudo-option and use it to "include out" random(4) if desired. Retire randomdev_none.c and introduce random_infra.c for resident infrastructure. Completely stub out random(4) calls in the "without DEV_RANDOM" case. Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten algorithm. Add a skeleton "other" algorithm framework for folks to add their own processing code. NIST, anyone? Retire the RANDOM_DUMMY option. Build modules for Yarrow, Fortuna and "other". Use atomics for the live entropy rate-tracking. Convert ints to bools for the 'seeded' logic. Move _write() function from the algorithm-specific areas to randomdev.c Get rid of reseed() function - it is unused. Tidy up the opt_*.h includes. Update documentation for random(4) modules. Fix test program (reviewers, please leave this). Differential Revision: https://reviews.freebsd.org/D3354 Reviewed by: wblock,delphij,jmg,bjk Approved by: so (/dev/random blanket)
2015-08-17 07:36:12 +00:00
DEV_RANDOM opt_global.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
DEV_SPLASH opt_splash.h
Move DEV_ entries scattered to their common section. Add DEV_PCI.
2015-01-17 02:17:57 +00:00
DEV_VLAN opt_vlan.h
Add an option ED_NO_MIIBUS, which causes the `ed' driver to be built without support for miibus PHYs. Most ed cards don't need miibus support, so it's useful to be able to avoid the bloat of all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
# ed driver
Break out obscure ISA cards into their own files, as well as ne2000 and wd80x3 support. Make the obscure ISA cards optional, and add those options to NOTES on i386 (note: the ifdef around the whole code is for module building). Tweak pc98 ed support to include wd80x3 too. Add goo for alpha too. The affected cards are the 3Com 3C503, HP LAN+ and SIC (whatever that is). I couldn't find any of these for sale on ebay, so they are untested. If you have one of these cards, and send it to me, I'll ensure that you have no future problems with it... Minor cleanups as well by using functions rather than cut and paste code for some probing operations (where the function call overhead is lost in the noise). Remove use of kvtop, since they aren't required anymore. This driver needs to get its memory mapped act together, however, and use bus space. It doesn't right now. This reduces the size of if_ed.ko from about 51k to 33k on my laptop.
2005-02-09 20:03:40 +00:00
ED_HPP opt_ed.h
ED_3C503 opt_ed.h
ED_SIC opt_ed.h
Enable polling to be configured into kernels on non i386 platforms. Note that poll_in_trap is only implemented on i386. I've tested this on alpha. Approved by: luigi
2002-02-12 00:26:06 +00:00
Hook bce up to the build
2006-04-10 20:04:22 +00:00
# bce driver
BCE_DEBUG opt_bce.h
Add the capability to read the complete contents of the NVRAM via sysctl dev.bce.<unit>.nvram_dump Add the capability to write the complete contents of the NVRAM via sysctl dev.bce.<unit>.nvram_write These are only available if the kernel option BCE_DEBUG is enabled. The nvram_write sysctl also requires the kernel option BCE_NVRAM_WRITE_SUPPORT to be enabled. These are to be used at your own caution. Since the MAC addresses are stored in the NVRAM, if you dump one NIC and restore it on another NIC the destination NIC's MAC addresses will not be preserved. A tool can be made using these sysctl's to manage the on-chip firmware. Reviewed by: davidch, yongari
2010-10-06 18:36:50 +00:00
BCE_NVRAM_WRITE_SUPPORT opt_bce.h
Hook bce up to the build
2006-04-10 20:04:22 +00:00
speedup stream socket recv handling by tracking the tail of the mbuf chain instead of walking the list for each append Submitted by: ps/jayanth Obtained from: netbsd (jason thorpe)
2003-10-28 05:47:40 +00:00
SOCKBUF_DEBUG opt_global.h
- Initial release of bxe(4) to support Broadcom NetXtreme II 10GbE. (BCM57710, BCM57711, BCM57711E) MFC after: One month
2011-03-14 22:42:41 +00:00
o add crypto driver glue for using the new rndtest driver/module; this is conditional in each driver on foo_RNDTEST being defined_ o bring HIFN_DEBUG and UBSEC_DEBUG out to be visible options; they control the debugging printfs that are set with hw.foo.debug (e.g. hw.hifn.debug)
2003-03-11 22:47:06 +00:00
# options for ubsec driver
UBSEC_DEBUG opt_ubsec.h
UBSEC_RNDTEST opt_ubsec.h
add "no RNG support options" for ubsec and hifn drivers
2003-06-25 14:49:24 +00:00
UBSEC_NO_RNG opt_ubsec.h
o add crypto driver glue for using the new rndtest driver/module; this is conditional in each driver on foo_RNDTEST being defined_ o bring HIFN_DEBUG and UBSEC_DEBUG out to be visible options; they control the debugging printfs that are set with hw.foo.debug (e.g. hw.hifn.debug)
2003-03-11 22:47:06 +00:00
# options for hifn driver
HIFN_DEBUG opt_hifn.h
HIFN_RNDTEST opt_hifn.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
safenet driver config glue Sponsored by: Global Technology Associates, Inc.
2003-07-21 21:50:41 +00:00
# options for safenet driver
SAFE_DEBUG opt_safe.h
SAFE_NO_RNG opt_safe.h
SAFE_RNDTEST opt_safe.h
Merge VT(9) project (a.k.a. newcons). Reviewed by: nwhitehorn MFC_to_10_after: re approval Sponsored by: The FreeBSD Foundation
2013-12-05 22:38:53 +00:00
# syscons/vt options
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
MAXCONS opt_syscons.h
SC_ALT_MOUSE_IMAGE opt_syscons.h
SC_CUT_SPACES2TABS opt_syscons.h
SC_CUT_SEPCHARS opt_syscons.h
SC_DEBUG_LEVEL opt_syscons.h
SC_DFLT_FONT opt_syscons.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
SC_DISABLE_KDBKEY opt_syscons.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
SC_DISABLE_REBOOT opt_syscons.h
SC_HISTORY_SIZE opt_syscons.h
SC_KERNEL_CONS_ATTR opt_syscons.h
Improve defaults for per-CPU kernel console colors, especially with 2 or 4 CPUs. Add a compile-time option SC_KERNEL_CONS_ATTRS to control the defaults. Default to color numbers in reverse order to CPU numbers (instead of in the same order with white first and wrapping to dark grey), so that the brightest bright colors are used first. Don't use dark grey at all; replace it by dark green. Syscons has too many compile-time options, but this one is needed in in case the defaults give something like white on white, or the user really hates this feature and can't wait to turn it off in rc. MFC after: next release?
2018-06-02 14:07:27 +00:00
SC_KERNEL_CONS_ATTRS opt_syscons.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
SC_KERNEL_CONS_REV_ATTR opt_syscons.h
SC_MOUSE_CHAR opt_syscons.h
SC_NO_CUTPASTE opt_syscons.h
SC_NO_FONT_LOADING opt_syscons.h
SC_NO_HISTORY opt_syscons.h
Add missing SC_NO_MODE_CHANGE option. Disable it in the powerpc NOTES though, as ofw_syscons(4) doesn't properly interface with syscons(4) regarding loading the font specified with SC_DFLT_FONT, causing a kernel with both options SC_OFWFB and SC_NO_MODE_CHANGE to not link.
2007-01-10 18:45:18 +00:00
SC_NO_MODE_CHANGE opt_syscons.h
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
SC_NO_SYSMOUSE opt_syscons.h
SC_NORM_ATTR opt_syscons.h
SC_NORM_REV_ATTR opt_syscons.h
SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_TWOBUTTON_MOUSE opt_syscons.h
Add missing VT_ kernel config knobs MFC after: 1 week
2014-06-30 19:34:16 +00:00
VT_ALT_TO_ESC_HACK opt_syscons.h
VT_FB_DEFAULT_WIDTH opt_syscons.h
VT_FB_DEFAULT_HEIGHT opt_syscons.h
VT_MAXWINDOWS opt_syscons.h
VT_TWOBUTTON_MOUSE opt_syscons.h
Break build with error in case when both syscons and newcons are enabled. Sponsored by: The FreeBSD Foundation
2013-12-10 15:36:29 +00:00
DEV_SC opt_syscons.h
DEV_VT opt_syscons.h
Allow experimental libteken features to be tested without changing code. The teken library already supports UTF-8 handling and xterm emulation, but we have reasons to disable this right now. Because we should make it easy and interesting for people to experiment with these features, allow them to be set in kernel configuration files. Before this commit we had a flag called `TEKEN_CONS25' to enable cons25-style emulation. I'm calling it the opposite now, `TEKEN_XTERM', because we want to enable it in kernel configuration files explicitly. Requested by: kib
2009-01-17 16:37:13 +00:00
# teken terminal emulator options
Switch the default terminal emulation style to xterm for most platforms. Right now syscons(4) uses a cons25-style terminal emulator. The disadvantages of that are: - Little compatibility with embedded devices with serial interfaces. - Bad bandwidth efficiency, mainly because of the lack of scrolling regions. - A very hard transition path to support for modern character sets like UTF-8. Our terminal emulation library, libteken, has been supporting xterm-style terminal emulation for months, so flip the switch and make everyone use an xterm-style console driver. I still have to enable this on i386. Right now pc98 and i386 share the same /etc/ttys file. I'm not going to switch pc98, because it uses its own Kanji-capable cons25 emulator. IMPORTANT: What to do if things go wrong (i.e. graphical artifacts): - Run the application inside script(1), try to reduce the problem and send me the log file. - In the mean time, you can run `vidcontrol -T cons25' and `export TERM=cons25' so you can run applications the same way you did before. You can also build your kernel with `options TEKEN_CONS25' to make all virtual terminals use the cons25 emulator by default. Discussed on: current@
2009-11-13 05:54:55 +00:00
TEKEN_CONS25 opt_teken.h
Allow experimental libteken features to be tested without changing code. The teken library already supports UTF-8 handling and xterm emulation, but we have reasons to disable this right now. Because we should make it easy and interesting for people to experiment with these features, allow them to be set in kernel configuration files. Before this commit we had a flag called `TEKEN_CONS25' to enable cons25-style emulation. I'm calling it the opposite now, `TEKEN_XTERM', because we want to enable it in kernel configuration files explicitly. Requested by: kib
2009-01-17 16:37:13 +00:00
TEKEN_UTF8 opt_teken.h
In order to get vt(4) a bit closer to the feature set provided by sc(4), implement options TERMINAL_{KERN,NORM}_ATTR. These are aliased to SC_{KERNEL_CONS,NORM}_ATTR and like these latter, allow to change the default colors of normal and kernel text respectively. Note on the naming: Although affecting the output of vt(4), technically kern/subr_terminal.c is primarily concerned with changing default colors so it would be inconsistent to term these options VT_{KERN,NORM}_ATTR. Actually, if the architecture and abstraction of terminal+teken+vt would be perfect, dev/vt/* wouldn't be touched by this commit at all. Reviewed by: emaste MFC after: 3 days Sponsored by: Bally Wulff Games & Entertainment GmbH
2014-06-27 19:57:57 +00:00
TERMINAL_KERN_ATTR opt_teken.h
TERMINAL_NORM_ATTR opt_teken.h
Allow experimental libteken features to be tested without changing code. The teken library already supports UTF-8 handling and xterm emulation, but we have reasons to disable this right now. Because we should make it easy and interesting for people to experiment with these features, allow them to be set in kernel configuration files. Before this commit we had a flag called `TEKEN_CONS25' to enable cons25-style emulation. I'm calling it the opposite now, `TEKEN_XTERM', because we want to enable it in kernel configuration files explicitly. Requested by: kib
2009-01-17 16:37:13 +00:00
Turn console printf buffering into a kernel option and only on by default for sun4v where it is absolutely required. This change moves the buffer from struct pcpu to the stack to avoid using the critical section which created a LOR in a couple of cases due to interaction with the tty code and kqueue. The LOR can't be fixed with the critical section and the pcpu buffer can't be used without the critical section. Putting the buffer on the stack was my initial solution, but it was pointed out that the stress on the stack might cause problems depending on the call path. We don't have a way of creating tests for those possible cases, so it's best to leave this as an option for the time being. In time we may get enough data to enable this option more generally.
2006-11-30 04:17:05 +00:00
# options for printf
PRINTF_BUFR_SIZE opt_printf.h
BOOT_TAG: Make a config(5) option, expose as sysctl and loader tunable BOOT_TAG lived shortly in sys/msgbuf.h, but this wasn't necessarily great for changing it or removing it. Move it into subr_prf.c and add options for it to opt_printf.h. One can specify both the BOOT_TAG and BOOT_TAG_SZ (really, size of the buffer that holds the BOOT_TAG). We expose it as kern.boot_tag and also add a loader tunable by the same name that we'll fetch upon initialization of the msgbuf. This allows for flexibility and also ensures that there's a consistent way to figure out the boot tag of the running kernel, rather than relying on headers to be in-sync. Prodded super-super-lightly by: imp
2018-08-09 17:47:47 +00:00
BOOT_TAG opt_printf.h
BOOT_TAG_SZ opt_printf.h
Turn console printf buffering into a kernel option and only on by default for sun4v where it is absolutely required. This change moves the buffer from struct pcpu to the stack to avoid using the critical section which created a LOR in a couple of cases due to interaction with the tty code and kqueue. The LOR can't be fixed with the critical section and the pcpu buffer can't be used without the critical section. Putting the buffer on the stack was my initial solution, but it was pointed out that the stress on the stack might cause problems depending on the call path. We don't have a way of creating tests for those possible cases, so it's best to leave this as an option for the time being. In time we may get enough data to enable this option more generally.
2006-11-30 04:17:05 +00:00
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
# kbd options
KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
KBD_INSTALL_CDEV opt_kbd.h
KBD_MAXRETRY opt_kbd.h
KBD_MAXWAIT opt_kbd.h
KBD_RESETDELAY opt_kbd.h
KBDIO_DEBUG opt_kbd.h
config+build glue for Atheros support
2003-06-25 14:51:20 +00:00
Add option to specify built-in keymap for kbdmux PR: 153459 Submitted by: swell.k@gmail.com
2016-04-07 20:12:45 +00:00
KBDMUX_DFLT_KEYMAP opt_kbdmux.h
o add opt_ath.h enable tweaking various config parameters for the driver without modifying the source code o default debug msgs and diag support to off MFC after: 3 days
2006-04-03 18:14:02 +00:00
# options for the Atheros driver
ATH_DEBUG opt_ath.h
ATH_TXBUF opt_ath.h
ATH_RXBUF opt_ath.h
ATH_DIAGAPI opt_ath.h
ATH_TX99_DIAG opt_ath.h
Add ATH_ENABLE_DFS which enables the DFS flag so the DFS code can be tested. This doesn't at all actually do radar detection! It's just so developers who wish to test the net80211 DFS code can easily do so. Without this flag, the DFS channels are never marked DFS and thus the DFS stuff doesn't run.
2011-06-26 13:43:15 +00:00
ATH_ENABLE_11N opt_ath.h
ATH_ENABLE_DFS opt_ath.h
Upgrade ATH_EEPROM_FIRMWARE to a configuration option.
2012-04-13 18:00:48 +00:00
ATH_EEPROM_FIRMWARE opt_ath.h
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
Add some new debugging options for the ath(4) and ath_hal(4) drivers.
2013-01-15 18:04:15 +00:00
ATH_DEBUG_ALQ opt_ath.h
ATH_KTR_INTR_DEBUG opt_ath.h
o add opt_ath.h enable tweaking various config parameters for the driver without modifying the source code o default debug msgs and diag support to off MFC after: 3 days
2006-04-03 18:14:02 +00:00
Switch to ath hal source code. Note this removes the ath_hal module; the ath module now brings in the hal support. Kernel config files are almost backwards compatible; supplying device ath_hal gives you the same chip support that the binary hal did but you must also include options AH_SUPPORT_AR5416 to enable the extended format descriptors used by 11n parts. It is now possible to control the chip support included in a build by specifying exactly which chips are to be supported in the config file; consult ath_hal(4) for information.
2008-12-01 16:53:01 +00:00
# options for the Atheros hal
AH_SUPPORT_AR5416 opt_ah.h
Add documentation to sys/conf/options pointing out that AH_SUPPORT_AR9130 shouldn't be enabled by default unless you're truely building for the AR913x platform.
2011-05-02 05:39:43 +00:00
# XXX For now, this breaks non-AR9130 chipsets, so only use it
Misc. build: minor spelling fixes. No functional change.
2016-05-03 22:01:48 +00:00
# XXX when actually targeting AR9130.
Add the AH_SUPPORT_AR9130 option.
2011-04-29 18:26:17 +00:00
AH_SUPPORT_AR9130 opt_ah.h
Switch to ath hal source code. Note this removes the ath_hal module; the ath module now brings in the hal support. Kernel config files are almost backwards compatible; supplying device ath_hal gives you the same chip support that the binary hal did but you must also include options AH_SUPPORT_AR5416 to enable the extended format descriptors used by 11n parts. It is now possible to control the chip support included in a build by specifying exactly which chips are to be supported in the config file; consult ath_hal(4) for information.
2008-12-01 16:53:01 +00:00
Add in two new configuration options for the current generation SoCs.
2013-06-26 05:01:50 +00:00
# This is required for AR933x SoC support
AH_SUPPORT_AR9330 opt_ah.h
AH_SUPPORT_AR9340 opt_ah.h
Add AR9530 (honeybee) config option.
2015-11-28 01:09:30 +00:00
AH_SUPPORT_QCA9530 opt_ah.h
Add option to support the QCA955x SoC wifi.
2015-01-06 07:51:46 +00:00
AH_SUPPORT_QCA9550 opt_ah.h
Add in two new configuration options for the current generation SoCs.
2013-06-26 05:01:50 +00:00
Switch to ath hal source code. Note this removes the ath_hal module; the ath module now brings in the hal support. Kernel config files are almost backwards compatible; supplying device ath_hal gives you the same chip support that the binary hal did but you must also include options AH_SUPPORT_AR5416 to enable the extended format descriptors used by 11n parts. It is now possible to control the chip support included in a build by specifying exactly which chips are to be supported in the config file; consult ath_hal(4) for information.
2008-12-01 16:53:01 +00:00
AH_DEBUG opt_ah.h
AH_ASSERT opt_ah.h
AH_DEBUG_ALQ opt_ah.h
AH_REGOPS_FUNC opt_ah.h
AH_WRITE_REGDOMAIN opt_ah.h
AH_DEBUG_COUNTRY opt_ah.h
AH_WRITE_EEPROM opt_ah.h
AH_PRIVATE_DIAG opt_ah.h
AH_NEED_DESC_SWAP opt_ah.h
AH_USE_INIPDGAIN opt_ah.h
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
AH_MAXCHAN opt_ah.h
The Atheros AR71xx CPUs, when paired with the AR5212 parts, has a bug that generates a fatal bus trap. Normally, the chips are setup to do 128 byte DMA bursts, but when on this CPU, they can only safely due 4-byte DMA bursts due to this bug. Details of the exact nature of the bug are sketchy, but some can be found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and 6. There's a small performance penalty associated with this workaround, so it is only enabled when needed on the Atheros AR71xx platforms. Unfortunately, this condition is impossible to detect at runtime without MIPS specific ifdefs. Rather than cast an overly-broad net like Linux/OpenWRT dues (which enables this workaround all the time on MIPS32 platforms), we put this option in the kernel for just the affected machines. Sam didn't like this aspect of the patch when he reviewed it, and I'd love to hear sane proposals on how to fix it :) Reviewed by: sam@
2010-05-01 16:36:14 +00:00
AH_RXCFG_SDMAMW_4BYTES opt_ah.h
Add some new debugging options for the ath(4) and ath_hal(4) drivers.
2013-01-15 18:04:15 +00:00
AH_INTERRUPT_DEBUGGING opt_ah.h
Introduce AH_AR5416_INTERRUPT_MITIGATION which enables interrupt mitigation for the AR5416 and later. Rename the older HAL option to use this.
2011-03-31 08:48:05 +00:00
# AR5416 and later interrupt mitigation
Add documentation to sys/conf/options pointing out that AH_SUPPORT_AR9130 shouldn't be enabled by default unless you're truely building for the AR913x platform.
2011-05-02 05:39:43 +00:00
# XXX do not use this for AR9130
Introduce AH_AR5416_INTERRUPT_MITIGATION which enables interrupt mitigation for the AR5416 and later. Rename the older HAL option to use this.
2011-03-31 08:48:05 +00:00
AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for Broadcom BCM43xx chipsets. This driver uses the v3 firmware that needs to be fetched separately. A port will be committed to create the bwi firmware module. The driver matches the following chips: Broadcom BCM4301, BCM4307, BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319 The driver works for 802.11b and 802.11g. Limitations: This doesn't support the 802.11a or 802.11n portion of radios. Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3. Documenation for this firmware is reverse engineered from http://bcm.sipsolutions.net/ V4 of the firmware is needed for 11a or 11n support http://bcm-v4.sipsolutions.net/ Firmware needs to be fetched from a third party, port to be committed # I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and # not connected it to the build until the firmware port is committed. Obtained from: DragonFlyBSD, //depot/projects/vap Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
# options for the Broadcom BCM43xx driver (bwi)
BWI_DEBUG opt_bwi.h
BWI_DEBUG_VERBOSE opt_bwi.h
[bwn] add opt_bwi.h and BWN_DEBUG. It isn't used yet in the bwn(4) code; that'll come next.
2016-05-09 05:59:21 +00:00
# options for the Brodacom BCM43xx driver (bwn)
[bwn] oops. typo.
2016-05-09 06:02:57 +00:00
BWN_DEBUG opt_bwn.h
[bwn] add the BWN_GPL_PHY option. This will eventually enable building the GPL PHY hooks needed for running b43 based PHYs. For now it'll just build PHY-N.
2016-05-17 07:10:30 +00:00
BWN_GPL_PHY opt_bwn.h
Introduce bwn(4) support for the bhnd(4) bus. Currently, bwn(4) relies on the siba_bwn(4) bus driver to provide support for the on-chip SSB interconnect found in Broadcom's older PCI(e) Wi-Fi adapters. Non-PCI Wi-Fi adapters, as well as the newer BCMA interconnect found in post-2009 Broadcom Wi-Fi hardware, are not supported by siba_bwn(4). The bhnd(4) bus driver (also used by the FreeBSD/MIPS Broadcom port) provides a unified kernel interface to a superset of the hardware supported by siba_bwn; by attaching bwn(4) via bhnd(4), we can support both modern PCI(e) Wi-Fi devices based on the BCMA backplane interconnect, as well as Broadcom MIPS WiSoCs that include a D11 MAC core directly attached to their SSB or BCMA backplane. This diff introduces opt-in bwn(4) support for bhnd(4) by providing: - A small bwn(4) driver subclass, if_bwn_bhnd, that attaches via bhnd(4) instead of siba_bwn(4). - A bhndb(4)-based PCI host bridge driver, if_bwn_pci, that optionally probes at a higher priority than the siba_bwn(4) PCI driver. - A set of compatibility shims that perform translation of bwn(4)'s siba_bwn function calls into their bhnd(9) API equivalents when bwn(4) is attached via a bhnd(4) bus parent. When bwn(4) is attached via siba_bwn(4), all siba_bwn function calls are simply passed through to their original implementations. To test bwn(4) with bhnd(4), place the following lines in loader.conf(5): hw.bwn_pci.preferred="1" if_bwn_pci_load="YES bwn_v4_ucode_load="YES" bwn_v4_lp_ucode_load="YES" To verify that bwn(4) is using bhnd(4), you can check dmesg: bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 15> ... on bhnd0 ... or devinfo(8): pcib2 pci2 bwn_pci0 bhndb0 bhnd0 bwn0 ... bwn(4)/bhnd(4) has been tested for regressions with most chipsets currently supported by bwn(4), including: - BCM4312 - BCM4318 - BCM4321 With minimal changes to the DMA code (not included in this commit), I was also able to test support for newer BCMA devices by bringing up basic working Wi-Fi on two previously unsupported, BCMA-based N-PHY chipsets: - BCM43224 - BCM43225 Approved by: adrian (mentor, implicit) Sponsored by: The FreeBSD Foundation & Plausible Labs Differential Revision: https://reviews.freebsd.org/D13041
2017-12-02 02:21:27 +00:00
BWN_USE_SIBA opt_bwn.h
[bwn] add opt_bwi.h and BWN_DEBUG. It isn't used yet in the bwn(4) code; that'll come next.
2016-05-09 05:59:21 +00:00
[siba] add SIBA_DEBUG option. Sponsored by: Palm Springs
2016-05-16 20:18:54 +00:00
# Options for the SIBA driver
SIBA_DEBUG opt_siba.h
Multi-bss (aka vap) support for 802.11 devices. Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module. Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
2008-04-20 20:35:46 +00:00
# options for the Marvell 8335 wireless driver
MALO_DEBUG opt_malo.h
MALO_TXBUF opt_malo.h
MALO_RXBUF opt_malo.h
driver for Marvell 88W8363 Wireless LAN controller
2009-06-01 18:07:01 +00:00
# options for the Marvell wireless driver
MWL_DEBUG opt_mwl.h
MWL_TXBUF opt_mwl.h
MWL_RXBUF opt_mwl.h
MWL_DIAGAPI opt_mwl.h
MWL_AGGR_SIZE opt_mwl.h
MWL_TX_NODROP opt_mwl.h
Introduce Armada 38x/XP network controller support This patch contains a new driver for the network unit of Marvell Armada 38x/XP SoCs, called NETA. This support was thoroughly tested and optimised in terms of stability and performance. Additional hardware features, like Buffer Management (BM) or Parser and Classifier (PnC) will be progressively supported as needed. Submitted by: Fabien Thomas <fabien.thomas@stormshield.eu> Arnaud Ysmal <arnaud.ysmal@stormshield.eu> Zbigniew Bodek <zbb@semihalf.com> Michal Mazur <mkm@semihalf.com> Bartosz Szczepanek <bsz@semihalf.com> Marcin Wojtas <mw@semihalf.com> Obtained from: Semihalf Sponsored by: Stormshield (main development) Netgate (cleanup and upstreaming) Differential revision: https://reviews.freebsd.org/D10706
2017-06-13 18:46:29 +00:00
# Options for the Marvell NETA driver
MVNETA_MULTIQUEUE opt_mvneta.h
MVNETA_KTR opt_mvneta.h
Fix a comment for iwm. Submitted by: brueffer
2015-08-10 16:32:47 +00:00
# Options for the Intel 802.11ac wireless driver
sys/conf/options: add IWM_DEBUG.
2015-08-08 20:45:12 +00:00
IWM_DEBUG opt_iwm.h
Add IWN_DEBUG as an option for if_iwn.
2013-08-01 21:50:13 +00:00
# Options for the Intel 802.11n wireless driver
IWN_DEBUG opt_iwn.h
Add WPI_DEBUG option. PR: kern/197143 Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
2015-02-07 23:09:03 +00:00
# Options for the Intel 3945ABG wireless driver
WPI_DEBUG opt_wpi.h
Add dumb console driver and related bits. dcons(4): very simple console and gdb port driver dcons_crom(4): FireWire attachment dconschat(8): User interface to dcons Tested with: i386, i386-PAE, and sparc64.
2003-10-24 15:44:10 +00:00
# dcons options
DCONS_BUF_SIZE opt_dcons.h
DCONS_POLL_HZ opt_dcons.h
DCONS_FORCE_CONSOLE opt_dcons.h
DCONS_FORCE_GDB opt_dcons.h
Kill count device support from config. I've changed the last few remaining consumers to have the count passed as an option. This is i4b, pc98/wdc, and coda. Bump configvers.h from 500013 to 600000. Remove heuristics that tried to parse "device ed5" as 5 units of the ed device. This broke things like the snd_emu10k1 device, which required quotes to make it parse right. The no-longer-needed quotes have been removed from NOTES, GENERIC etc. eg, I've removed the quotes from: device snd_maestro device "snd_maestro3" device snd_mss I believe everything will still compile and work after this.
2004-08-30 23:03:58 +00:00
Bring a working snapshot of hwpmc(4), its associated libraries, userland utilities and documentation into -CURRENT. Bump FreeBSD_version. Reviewed by: alc, jhb (kernel changes)
2005-04-19 04:01:25 +00:00
# HWPMC options
Move hwpmc(4) debugging code under a new HWPMC_DEBUG option instead of the broader DEBUG option. Reviewed by: emaste MFC after: 2 weeks Sponsored by: Norse Corp, Inc.
2015-05-08 15:57:23 +00:00
HWPMC_DEBUG opt_global.h
Move HWPMC_HOOKS into its own opt_hwpmc_hooks.h file. It doesn't merit being in opt_global.h and forcing a global recompile when only a few files reference it. Approved by: re
2005-06-24 00:16:57 +00:00
HWPMC_HOOKS
Rework MIPS PMC code: - Replace MIPS24K-specific code with more generic framework that will make adding new CPU support easier - Add MIPS24K support for new framework - Limit backtrace depth to 1 for stability reasons and add option HWPMC_MIPS_BACKTRACE to override this limitation
2012-03-22 18:01:23 +00:00
HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
Hook XFS into kernel build.
2005-12-12 01:14:59 +00:00
Multi-bss (aka vap) support for 802.11 devices. Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module. Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
2008-04-20 20:35:46 +00:00
# 802.11 support layer
IEEE80211_DEBUG opt_wlan.h
IEEE80211_DEBUG_REFCNT opt_wlan.h
IEEE80211_AMPDU_AGE opt_wlan.h
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
IEEE80211_SUPPORT_MESH opt_wlan.h
split Atheros SuperG support out into it's own file that's included only with a new IEEE80211_SUPPORT_SUPERG option
2009-03-24 20:39:08 +00:00
IEEE80211_SUPPORT_SUPERG opt_wlan.h
TDMA support for long distance point-to-point links using ath devices: o add net80211 support for a tdma vap that is built on top of the existing adhoc-demo support o add tdma scheduling of frame transmission to the ath driver; it's conceivable other devices might be capable of this too in which case they can make use of the 802.11 protocol additions etc. o add minor bits to user tools that need to know: ifconfig to setup and configure, new statistics in athstats, and new debug mask bits While the architecture can support >2 slots in a TDMA BSS the current design is intended (and tested) for only 2 slots. Sponsored by: Intel
2009-01-08 17:12:47 +00:00
IEEE80211_SUPPORT_TDMA opt_wlan.h
Implement very basic ALQ logging for net80211. This is destined to be a lightweight and optional set of ALQ probes for debugging events which are just impossible to debug with printf/log (eg packet TX/RX handling; AMPDU handling.) The probes and operations themselves will appear in subsequent commits.
2011-04-21 03:59:37 +00:00
IEEE80211_ALQ opt_wlan.h
Add a DFS debugging mode which is useful when doing automated DFS compliance testing. In order to allow for radar pattern matching to occur, the DFS CAC/NOL handling needs to be made configurable. This commit introduces a new sysctl, "net.wlan.dfs_debug", which controls which DFS debug mode net80211 is in. * 0 = default, CSA/NOL handling as per normal. * 1 = announce a CSA, but don't add the channel to the non-occupy list (NOL.) * 2 = disable both CSA and NOL - only print that a radar event occured. This code is not compiled/enabled by default as it breaks regulatory handling. A user must enable IEEE80211_DFS_DEBUG in their kernel configuration file for this option to become available. Obtained from: Atheros
2012-01-31 00:03:49 +00:00
IEEE80211_DFS_DEBUG opt_wlan.h
TDMA support for long distance point-to-point links using ath devices: o add net80211 support for a tdma vap that is built on top of the existing adhoc-demo support o add tdma scheduling of frame transmission to the ath driver; it's conceivable other devices might be capable of this too in which case they can make use of the 802.11 protocol additions etc. o add minor bits to user tools that need to know: ifconfig to setup and configure, new statistics in athstats, and new debug mask bits While the architecture can support >2 slots in a TDMA BSS the current design is intended (and tested) for only 2 slots. Sponsored by: Intel
2009-01-08 17:12:47 +00:00
# 802.11 TDMA support
TDMA_SLOTLEN_DEFAULT opt_tdma.h
TDMA_SLOTCNT_DEFAULT opt_tdma.h
TDMA_BINTVAL_DEFAULT opt_tdma.h
TDMA_TXRATE_11B_DEFAULT opt_tdma.h
TDMA_TXRATE_11G_DEFAULT opt_tdma.h
TDMA_TXRATE_11A_DEFAULT opt_tdma.h
add more tdma fixed rate defaults
2009-05-01 17:18:45 +00:00
TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
Multi-bss (aka vap) support for 802.11 devices. Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module. Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
2008-04-20 20:35:46 +00:00
Import videomode code from NetBSD which is needed by USB display link drivers.
2015-02-15 11:37:40 +00:00
# VideoMode
PICKMODE_DEBUG opt_videomode.h
Make VNET_DEBUG a standalone compile-time option, i.e. decouple it from INVARIANTS. Reviewed by: bz Approved by: re (rwatson), julian (mentor)
2009-08-14 22:41:39 +00:00
# Network stack virtualization options
VIMAGE is a global option
2008-08-24 21:33:10 +00:00
VIMAGE opt_global.h
Make VNET_DEBUG a standalone compile-time option, i.e. decouple it from INVARIANTS. Reviewed by: bz Approved by: re (rwatson), julian (mentor)
2009-08-14 22:41:39 +00:00
VNET_DEBUG opt_global.h
Add support for frobbing Intel StrataFlash Protection Registers: o add CFI_SUPPORT_STRATAFLASH compile option to enable support o add new ioctls to get/set the factory and user/oem segments of the PR and to get/set Protection Lock Register that fuses the user segment o add #defines for bits in the status register o update cfi_wait_ready to take an offset so it can be used to wait for PR write completion and replace constants w/ symbolic names Note: writing the user segment isn't correct; committing now to get review. Sponsored by: Carlson Wireless Reviewed by: imp, Chris Anderson
2009-02-05 18:12:07 +00:00
# Common Flash Interface (CFI) options
CFI_SUPPORT_STRATAFLASH opt_cfi.h
CFI_ARMEDANDDANGEROUS opt_cfi.h
Provide a workaround for setting the correct endianness when doing CFI on a mips big-endian board. This is (hopefully! ish!) a temporary change until a slightly better way can be found to express this without a config option. Tested: * BUFFALO WZR-HP-G300NH 1stGen (by submitter) Submitted by: Mori Hiroki <yamori813@yahoo.co.jp>
2016-02-04 22:39:27 +00:00
CFI_HARDWAREBYTESWAP opt_cfi.h
Sound Mega-commit. Expect further cleanup until code freeze. For a slightly thorough explaination, please refer to [1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html . Summary of changes includes: 1 Volume Per-Channel (vpc). Provides private / standalone volume control unique per-stream pcm channel without touching master volume / pcm. Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for backwards compatibility, SOUND_MIXER_PCM through the opened dsp device instead of /dev/mixer. Special "bypass" mode is enabled through /dev/mixer which will automatically detect if the adjustment is made through /dev/mixer and forward its request to this private volume controller. Changes to this volume object will not interfere with other channels. Requirements: - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which require specific application modifications (preferred). - No modifications required for using bypass mode, so applications like mplayer or xmms should work out of the box. Kernel hints: - hint.pcm.%d.vpc (0 = disable vpc). Kernel sysctls: - hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer bypass mode. - hw.snd.vpc_autoreset (default: 1). By default, closing/opening /dev/dsp will reset the volume back to 0 db gain/attenuation. Setting this to 0 will preserve its settings across device closing/opening. - hw.snd.vpc_reset (default: 0). Panic/reset button to reset all volume settings back to 0 db. - hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value. 2 High quality fixed-point Bandlimited SINC sampling rate converter, based on Julius O'Smith's Digital Audio Resampling - http://ccrma.stanford.edu/~jos/resample/. It includes a filter design script written in awk (the clumsiest joke I've ever written) - 100% 32bit fixed-point, 64bit accumulator. - Possibly among the fastest (if not fastest) of its kind. - Resampling quality is tunable, either runtime or during kernel compilation (FEEDER_RATE_PRESETS). - Quality can be further customized during kernel compilation by defining FEEDER_RATE_PRESETS in /etc/make.conf. Kernel sysctls: - hw.snd.feeder_rate_quality. 0 - Zero-order Hold (ZOH). Fastest, bad quality. 1 - Linear Interpolation (LINEAR). Slightly slower than ZOH, better quality but still does not eliminate aliasing. 2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC quality always start from 2 and above. Rough quality comparisons: - http://people.freebsd.org/~ariff/z_comparison/ 3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be directly fed into the hardware. 4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf. 5 Transparent/Adaptive Virtual Channel. Now you don't have to disable vchans in order to make digital format pass through. It also makes vchans more dynamic by choosing a better format/rate among all the concurrent streams, which means that dev.pcm.X.play.vchanformat/rate becomes sort of optional. 6 Exclusive Stream, with special open() mode O_EXCL. This will "mute" other concurrent vchan streams and only allow a single channel with O_EXCL set to keep producing sound. Other Changes: * most feeder_* stuffs are compilable in userland. Let's not speculate whether we should go all out for it (save that for FreeBSD 16.0-RELEASE). * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org> * pull out channel mixing logic out of vchan.c and create its own feeder_mixer for world justice. * various refactoring here and there, for good or bad. * activation of few more OSSv4 ioctls() (see [1] above). * opt_snd.h for possible compile time configuration: (mostly for debugging purposes, don't try these at home) SND_DEBUG SND_DIAGNOSTIC SND_FEEDER_MULTIFORMAT SND_FEEDER_FULL_MULTIFORMAT SND_FEEDER_RATE_HP SND_PCM_64 SND_OLDSTEREO Manual page updates are on the way. Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
# Sound options
SND_DEBUG opt_snd.h
SND_DIAGNOSTIC opt_snd.h
SND_FEEDER_MULTIFORMAT opt_snd.h
SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
SND_FEEDER_RATE_HP opt_snd.h
SND_PCM_64 opt_snd.h
SND_OLDSTEREO opt_snd.h
- Port x86emu to FreeBSD. - Connect x86emu to build. Tested with: make universe Submitted by: swell.k at gmail com
2009-09-09 05:53:26 +00:00
Collapase interrupt supporting functions to a new module, and switch from x86emu to this new module. This changeset also brings a fix for bugs introduced with the initial x86emu commit, which prevents the user from using some display mode or cause instant reboots during mode switch. Submitted by: paradox <ddkprog yahoo com>
2009-09-21 08:17:57 +00:00
X86BIOS
Introduce kernel build options for the Flattened Device Tree support. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-05-28 10:35:44 +00:00
# Flattened device tree options
FDT opt_platform.h
FDT_DTB_STATIC opt_platform.h
- Merge changes to the base system to support OFED. These include a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND, and other miscellaneous small features.
2011-03-21 09:40:01 +00:00
# OFED Infiniband stack
There are still kernel configs and mk files depending on the OFED option. This will need a proper cleanup and in the meantime after r277302 unbreak LINT builds.
2015-01-18 01:28:08 +00:00
OFED opt_ofed.h
- Merge changes to the base system to support OFED. These include a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND, and other miscellaneous small features.
2011-03-21 09:40:01 +00:00
OFED_DEBUG_INIT opt_ofed.h
SDP opt_ofed.h
SDP_DEBUG opt_ofed.h
Add the missing IPOIB option. Sponsored by: iXsystems, Inc. MFC after: 3 days
2012-03-14 22:44:56 +00:00
IPOIB opt_ofed.h
- Merge changes to the base system to support OFED. These include a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND, and other miscellaneous small features.
2011-03-21 09:40:01 +00:00
IPOIB_DEBUG opt_ofed.h
IPOIB_CM opt_ofed.h
Add an option - AR71XX_REALMEM - which overrides the amount of memory detected from Redboot, or overrides the "otherwise" case if no Redboot information was found. Some AR71XX platforms don't use Redboot (eg TP-LINK devices using UBoot; some later Ubiquiti devices which apparently also use UBoot) and at least one plain out lies - the Ubiquiti LS-SR71A Redboot says there's 16mb of RAM when in fact there's 32mb. A more "clean" solution will be needed at a later date.
2011-03-27 08:44:27 +00:00
Add racct. It's an API to keep per-process, per-jail, per-loginclass and per-loginclass resource accounting information, to be used by the new resource limits code. It's connected to the build, but the code that actually calls the new functions will come later. Sponsored by: The FreeBSD Foundation Reviewed by: kib (earlier version)
2011-03-29 17:47:25 +00:00
# Resource Accounting
RACCT opt_global.h
Build GENERIC with RACCT/RCTL support by default. Note that it still needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf. Differential Revision: https://reviews.freebsd.org/D2407 Reviewed by: emaste@, wblock@ MFC after: 1 month Relnotes: yes Sponsored by: The FreeBSD Foundation
2015-05-14 14:03:55 +00:00
RACCT_DEFAULT_TO_DISABLED opt_global.h
Add racct. It's an API to keep per-process, per-jail, per-loginclass and per-loginclass resource accounting information, to be used by the new resource limits code. It's connected to the build, but the code that actually calls the new functions will come later. Sponsored by: The FreeBSD Foundation Reviewed by: kib (earlier version)
2011-03-29 17:47:25 +00:00
Add rctl. It's used by racct to take user-configurable actions based on the set of rules it maintains and the current resource usage. It also privides userland API to manage that ruleset. Sponsored by: The FreeBSD Foundation Reviewed by: kib (earlier version)
2011-03-30 17:48:15 +00:00
# Resource Limits
RCTL opt_global.h
Add YARROW_RNG and FORTUNA_RNG to sys/conf/options. Add a SYSINIT that forces a reseed during proc0 setup, which happens fairly late in the boot process. Add a RANDOM_DEBUG option which enables some debugging printf()s. Add a new RANDOM_ATTACH entropy source which harvests entropy from the get_cyclecount() delta across each call to a device attach method.
2013-10-08 11:05:26 +00:00
# Random number generator(s)
Make the UMA harvesting go away completely if not wanted. Default to "not wanted". Provide and document the RANDOM_ENABLE_UMA option. Change RANDOM_FAST to RANDOM_UMA to clarify the harvesting. Remove RANDOM_DEBUG option, replace with SDT probes. These will be of use to folks measuring the harvesting effect when deciding whether to use RANDOM_ENABLE_UMA. Requested by: scottl and others. Approved by: so (/dev/random blanket) Differential Revision: https://reviews.freebsd.org/D3197
2015-08-22 12:59:05 +00:00
# Which CSPRNG hash we get.
Add DEV_RANDOM pseudo-option and use it to "include out" random(4) if desired. Retire randomdev_none.c and introduce random_infra.c for resident infrastructure. Completely stub out random(4) calls in the "without DEV_RANDOM" case. Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten algorithm. Add a skeleton "other" algorithm framework for folks to add their own processing code. NIST, anyone? Retire the RANDOM_DUMMY option. Build modules for Yarrow, Fortuna and "other". Use atomics for the live entropy rate-tracking. Convert ints to bools for the 'seeded' logic. Move _write() function from the algorithm-specific areas to randomdev.c Get rid of reseed() function - it is unused. Tidy up the opt_*.h includes. Update documentation for random(4) modules. Fix test program (reviewers, please leave this). Differential Revision: https://reviews.freebsd.org/D3354 Reviewed by: wblock,delphij,jmg,bjk Approved by: so (/dev/random blanket)
2015-08-17 07:36:12 +00:00
# If Yarrow is not chosen, Fortuna is selected.
Remove opt_random.h header pollution from sys/random.h by moving RANDOM_LOADABLE and RANDOM_YARROW's definitions from opt_random.h to opt_global.h This unbreaks `make depend` in sys/modules with multiple drivers (tmpfs, etc) after r286839 X-MFC with: r286839 Reviewed by: imp Submitted by: lwhsu Differential Revision: D3486
2015-09-08 08:50:28 +00:00
RANDOM_YARROW opt_global.h
Add DEV_RANDOM pseudo-option and use it to "include out" random(4) if desired. Retire randomdev_none.c and introduce random_infra.c for resident infrastructure. Completely stub out random(4) calls in the "without DEV_RANDOM" case. Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten algorithm. Add a skeleton "other" algorithm framework for folks to add their own processing code. NIST, anyone? Retire the RANDOM_DUMMY option. Build modules for Yarrow, Fortuna and "other". Use atomics for the live entropy rate-tracking. Convert ints to bools for the 'seeded' logic. Move _write() function from the algorithm-specific areas to randomdev.c Get rid of reseed() function - it is unused. Tidy up the opt_*.h includes. Update documentation for random(4) modules. Fix test program (reviewers, please leave this). Differential Revision: https://reviews.freebsd.org/D3354 Reviewed by: wblock,delphij,jmg,bjk Approved by: so (/dev/random blanket)
2015-08-17 07:36:12 +00:00
# With this, no entropy processor is loaded, but the entropy
# harvesting infrastructure is present. This means an entropy
# processor may be loaded as a module.
Remove opt_random.h header pollution from sys/random.h by moving RANDOM_LOADABLE and RANDOM_YARROW's definitions from opt_random.h to opt_global.h This unbreaks `make depend` in sys/modules with multiple drivers (tmpfs, etc) after r286839 X-MFC with: r286839 Reviewed by: imp Submitted by: lwhsu Differential Revision: D3486
2015-09-08 08:50:28 +00:00
RANDOM_LOADABLE opt_global.h
Make the UMA harvesting go away completely if not wanted. Default to "not wanted". Provide and document the RANDOM_ENABLE_UMA option. Change RANDOM_FAST to RANDOM_UMA to clarify the harvesting. Remove RANDOM_DEBUG option, replace with SDT probes. These will be of use to folks measuring the harvesting effect when deciding whether to use RANDOM_ENABLE_UMA. Requested by: scottl and others. Approved by: so (/dev/random blanket) Differential Revision: https://reviews.freebsd.org/D3197
2015-08-22 12:59:05 +00:00
# This turns on high-rate and potentially expensive harvesting in
# the uma slab allocator.
RANDOM_ENABLE_UMA opt_global.h
Reduce overhead of entropy collection - move harvest mask check inline - move harvest mask to frequently_read out of actively modified cache line - disable ether_input collection and describe its limitations in NOTES Typically entropy collection in ether_input was stirring zero in to the entropy pool while at the same time greatly reducing max pps. This indicates that perhaps we should more closely scrutinize how much entropy we're getting from a given source as well as what our actual entropy collection needs are for seeding Yarrow. Reviewed by: cem, gallatin, delphij Approved by: secteam Differential Revision: https://reviews.freebsd.org/D15526
2018-05-31 21:53:07 +00:00
RANDOM_ENABLE_ETHER opt_global.h
Change EM_MULTIQUEUE to a real kernconf entry and enable support for up to 2 rx/tx queues for the 82574. Program the 82574 to enable 5 msix vectors, assign 1 to each rx queue, 1 to each tx queue and 1 to the link handler. Inspired by DragonFlyBSD, enable some RSS logic for handling tx queue handling/processing. Move multiqueue handler functions so that they line up better in a diff review to if_igb.c Always enqueue tx work to be done in em_mq_start, if unable to acquire the TX lock, then this will be processed in the background later by the taskqueue. Remove mbuf argument from em_start_mq_locked() as the work is always enqueued. (stolen from igb) Setup TARC, TXDCTL and RXDCTL registers for better performance and stability in multiqueue and singlequeue implementations. Handle Intel errata 3 and generic multiqueue behavior with the initialization of TARC(0) and TARC(1) Bind interrupt threads to cpus in order. (stolen from igb) Add 2 new DDB functions, one to display the queue(s) and their settings and one to reset the adapter. Primarily used for debugging. In the multiqueue configuration, bump RXD and TXD ring size to max for the adapter (4096). Setup an RDTR of 64 and an RADV of 128 in multiqueue configuration to cut down on the number of interrupts. RADV was arbitrarily set to 2x RDTR and can be adjusted as needed. Cleanup the display in top a bit to make it clearer where the taskqueue threads are running and what they should be doing. Ensure that both queues are processed by em_local_timer() by writing them both to the IMS register to generate soft interrupts. Ensure that an soft interrupt is generated when em_msix_link() is run so that any races between assertion of the link/status interrupt and a rx/tx interrupt are handled. Document existing tuneables: hw.em.eee_setting, hw.em.msix, hw.em.smart_pwr_down, hw.em.sbp Document use of hw.em.num_queues and the new kernel option EM_MULTIQUEUE Thanks to Intel for their continued support of FreeBSD. Reviewed by: erj jfv hiren gnn wblock Obtained from: Intel Corporation MFC after: 2 weeks Relnotes: Yes Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D1994
2015-06-03 18:01:09 +00:00
[bhnd] Add logging macros to BHND. There are 5 logging levels: * ERROR * WARN * INFO * DEBUG * TRACE There are 2 logging context: * with * without device DEBUG and TRACE records are printed only if bootverbose. Logging records are printed with source code line information if acceptable logging level is DEBUG or TRACE. Submitted by: Michael Zhilin <mizhka@gmail.com> Differential Revision: https://reviews.freebsd.org/D6247
2016-05-16 23:40:32 +00:00
# BHND(4) driver
BHND_LOGLEVEL opt_global.h
[gpiospi] add debug option. This was missing from the previous commit that introduced gpiospi. It's required for it to build. Pointy-hat-to: me
2016-05-27 01:36:29 +00:00
# GPIO and child devices
GPIO_SPI_DEBUG opt_gpio.h
Add evdev protocol implementation evdev is a generic input event interface compatible with Linux evdev API at ioctl level. It allows using unmodified (apart from header name) input evdev drivers in Xorg, Wayland, Qt. This commit has only generic kernel API. evdev support for individual hardware drivers like ukbd, ums, atkbd, etc. will be committed later. Project was started by Jakub Klama as part of GSoC 2014. Jakub's evdev implementation was later used as a base, updated and finished by Vladimir Kondratiev. Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru> Reviewed by: adrian, hans Differential Revision: https://reviews.freebsd.org/D6998
2016-09-11 18:56:38 +00:00
Incorporate bus and chip select numbers into spigen(4) cdev names. Rather than assigning spigen device names in order of creation, this uses a device name that corresponds to the owning spibus and chip-select index. Example: /dev/spigen0.1 would be a child of spibus0, and use cs = 1 The intent is for systems like Raspberry Pi to have a consistent way of using an SPI interface with a specific cs value from a user application. Otherwise, there is no consistent way of knowing which cs pin will be assigned to a particular spigen device. The alternative is to specify everything in "the right order" in an overlay file, which is less than ideal. Additionally, this duplicates (to some extent) the way Linux handles a similar situation with their 'spidev' device, so it would be somewhat familiar to those who also use Linux. A new kernel config option, SPIGEN_LEGACY_CDEVNAME, causes the driver to also create /dev/spigenN device name aliases, with N incrementing in the order of device instantiation. This is provided to ease the transition for existing systems using the original naming convention (particularly when these changes are MFC'd to stable branches). Differential Revision: https://reviews.freebsd.org/D15301
2018-06-21 21:16:26 +00:00
# SPI devices
SPIGEN_LEGACY_CDEVNAME opt_spi.h
[etherswitch] add RTL8366SR support Add RTL8366SR support at etherswitch driver. Tested on RTL8366RB and RTL8366SR. Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: adrian, mizhka Approved by: adrian(mentor) Differential Revision: https://reviews.freebsd.org/D6796
2016-11-15 21:58:04 +00:00
# etherswitch(4) driver
RTL8366_SOFT_RESET opt_etherswitch.h
Add evdev protocol implementation evdev is a generic input event interface compatible with Linux evdev API at ioctl level. It allows using unmodified (apart from header name) input evdev drivers in Xorg, Wayland, Qt. This commit has only generic kernel API. evdev support for individual hardware drivers like ukbd, ums, atkbd, etc. will be committed later. Project was started by Jakub Klama as part of GSoC 2014. Jakub's evdev implementation was later used as a base, updated and finished by Vladimir Kondratiev. Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru> Reviewed by: adrian, hans Differential Revision: https://reviews.freebsd.org/D6998
2016-09-11 18:56:38 +00:00
# evdev protocol support
Modularize evdev - Convert "options EVDEV" to "device evdev" and "device uinput", add modules for both new devices. They are isolated subsystems and do not require any compile-time changes to general kernel subsytems - For hybrid drivers that have evdev as an optional way to deliver input events add option EVDEV_SUPPORT. Update all existing hybrid drivers to use it instead of EVDEV - Remove no-op DECLARE_MODULE in evdev, it's not required, MODULE_VERSION is enough - Add evdev module dependency to uinput Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
2016-10-02 03:20:31 +00:00
EVDEV_SUPPORT opt_evdev.h
Add evdev protocol implementation evdev is a generic input event interface compatible with Linux evdev API at ioctl level. It allows using unmodified (apart from header name) input evdev drivers in Xorg, Wayland, Qt. This commit has only generic kernel API. evdev support for individual hardware drivers like ukbd, ums, atkbd, etc. will be committed later. Project was started by Jakub Klama as part of GSoC 2014. Jakub's evdev implementation was later used as a base, updated and finished by Vladimir Kondratiev. Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru> Reviewed by: adrian, hans Differential Revision: https://reviews.freebsd.org/D6998
2016-09-11 18:56:38 +00:00
EVDEV_DEBUG opt_evdev.h
UINPUT_DEBUG opt_evdev.h
[mips] make UMTX_CHAINS configurable at compile time. The default (512) wastes quite a bit of space which doesn't really buy us much on highly embedded systems which don't take a lot of locks in parallel. This makes it at least build time configurable so people can experiment.
2016-11-15 01:34:38 +00:00
hyperv/hn: Add HN_DEBUG kernel option. If bufring is used for per-TX ring descs, don't update "available" counter, which is only used to help debugging. MFC after: 1 week Sponsored by: Microsoft Differential Revision: https://reviews.freebsd.org/D8674
2016-12-01 03:27:16 +00:00
# Hyper-V network driver
HN_DEBUG opt_hn.h
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
An MMC/SD/SDIO stack using CAM Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's flexible queueing will make it easier to write non-storage drivers than the legacy stack. SDIO drivers from both the kernel and as userland daemons are possible, though much of that functionality will come later. Some of the CAM integration isn't complete (there are sleeps in the device probe state machine, for example), but those minor issues can be improved in-tree more easily than out of tree and shouldn't gate progress on other fronts. Appologies to reviews if specific items have been overlooked. Submitted by: Ilya Bakulin Reviewed by: emaste, imp, mav, adrian, ian Differential Review: https://reviews.freebsd.org/D4761 merge with first commit, various compile hacks.
2017-07-09 16:57:24 +00:00
# CAM-based MMC stack
MMCCAM
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
# Encrypted kernel crash dumps
EKCD opt_ekcd.h
Add new compile-time option NVME_USE_NVD that sets the default value of the runtime hw.nvme.use_vnd tunable. We still default to nvd unless otherwise requested. Sponsored by: Netflix
2017-08-28 23:54:25 +00:00
# NVME options
NVME_USE_NVD opt_nvme.h
[amdsbwd] teach amdsbwd that it has options AMDSBWD_DEBUG was previously checked for as a #define but it was not possible to define it Reviewed by: kevans Discussed with: kenm
2018-04-24 13:07:17 +00:00
# amdsbwd options
AMDSBWD_DEBUG opt_amdsbwd.h
Reference in New Issue Copy Permalink