freebsd-skq/sys/dev/twe/twe_freebsd.c

1062 lines
29 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* FreeBSD-specific code.
*/
#include <sys/param.h>
#include <sys/cons.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <machine/md_var.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <dev/twe/twe_compat.h>
#include <dev/twe/twereg.h>
#include <dev/twe/tweio.h>
#include <dev/twe/twevar.h>
#include <dev/twe/twe_tables.h>
#include <sys/devicestat.h>
static devclass_t twe_devclass;
#ifdef TWE_DEBUG
static u_int32_t twed_bio_in;
#define TWED_BIO_IN twed_bio_in++
static u_int32_t twed_bio_out;
#define TWED_BIO_OUT twed_bio_out++
#else
#define TWED_BIO_IN
#define TWED_BIO_OUT
#endif
/********************************************************************************
********************************************************************************
Control device interface
********************************************************************************
********************************************************************************/
static d_open_t twe_open;
static d_close_t twe_close;
static d_ioctl_t twe_ioctl_wrapper;
#define TWE_CDEV_MAJOR 146
static struct cdevsw twe_cdevsw = {
twe_open,
twe_close,
noread,
nowrite,
twe_ioctl_wrapper,
nopoll,
nommap,
nostrategy,
"twe",
TWE_CDEV_MAJOR,
nodump,
nopsize,
0
};
/********************************************************************************
* Accept an open operation on the control device.
*/
static int
twe_open(dev_t dev, int flags, int fmt, d_thread_t *td)
{
int unit = minor(dev);
struct twe_softc *sc = devclass_get_softc(twe_devclass, unit);
sc->twe_state |= TWE_STATE_OPEN;
return(0);
}
/********************************************************************************
* Accept the last close on the control device.
*/
static int
twe_close(dev_t dev, int flags, int fmt, d_thread_t *td)
{
int unit = minor(dev);
struct twe_softc *sc = devclass_get_softc(twe_devclass, unit);
sc->twe_state &= ~TWE_STATE_OPEN;
return (0);
}
/********************************************************************************
* Handle controller-specific control operations.
*/
static int
twe_ioctl_wrapper(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, d_thread_t *td)
{
struct twe_softc *sc = (struct twe_softc *)dev->si_drv1;
return(twe_ioctl(sc, cmd, addr));
}
/********************************************************************************
********************************************************************************
PCI device interface
********************************************************************************
********************************************************************************/
static int twe_probe(device_t dev);
static int twe_attach(device_t dev);
static void twe_free(struct twe_softc *sc);
static int twe_detach(device_t dev);
static int twe_shutdown(device_t dev);
static int twe_suspend(device_t dev);
static int twe_resume(device_t dev);
static void twe_pci_intr(void *arg);
static void twe_intrhook(void *arg);
static device_method_t twe_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, twe_probe),
DEVMETHOD(device_attach, twe_attach),
DEVMETHOD(device_detach, twe_detach),
DEVMETHOD(device_shutdown, twe_shutdown),
DEVMETHOD(device_suspend, twe_suspend),
DEVMETHOD(device_resume, twe_resume),
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
{ 0, 0 }
};
static driver_t twe_pci_driver = {
"twe",
twe_methods,
sizeof(struct twe_softc)
};
#ifdef TWE_OVERRIDE
DRIVER_MODULE(Xtwe, pci, twe_pci_driver, twe_devclass, 0, 0);
#else
DRIVER_MODULE(twe, pci, twe_pci_driver, twe_devclass, 0, 0);
#endif
/********************************************************************************
* Match a 3ware Escalade ATA RAID controller.
*/
static int
twe_probe(device_t dev)
{
debug_called(4);
if ((pci_get_vendor(dev) == TWE_VENDOR_ID) &&
((pci_get_device(dev) == TWE_DEVICE_ID) ||
(pci_get_device(dev) == TWE_DEVICE_ID_ASIC))) {
device_set_desc(dev, TWE_DEVICE_NAME);
#ifdef TWE_OVERRIDE
return(0);
#else
return(-10);
#endif
}
return(ENXIO);
}
/********************************************************************************
* Allocate resources, initialise the controller.
*/
static int
twe_attach(device_t dev)
{
struct twe_softc *sc;
int rid, error;
u_int32_t command;
debug_called(4);
/*
* Initialise the softc structure.
*/
sc = device_get_softc(dev);
sc->twe_dev = dev;
/*
* Make sure we are going to be able to talk to this board.
*/
command = pci_read_config(dev, PCIR_COMMAND, 2);
if ((command & PCIM_CMD_PORTEN) == 0) {
twe_printf(sc, "register window not available\n");
return(ENXIO);
}
/*
* Force the busmaster enable bit on, in case the BIOS forgot.
*/
command |= PCIM_CMD_BUSMASTEREN;
pci_write_config(dev, PCIR_COMMAND, command, 2);
/*
* Allocate the PCI register window.
*/
rid = TWE_IO_CONFIG_REG;
if ((sc->twe_io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE)) == NULL) {
twe_printf(sc, "can't allocate register window\n");
twe_free(sc);
return(ENXIO);
}
sc->twe_btag = rman_get_bustag(sc->twe_io);
sc->twe_bhandle = rman_get_bushandle(sc->twe_io);
/*
* Allocate the parent bus DMA tag appropriate for PCI.
*/
if (bus_dma_tag_create(NULL, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, TWE_MAX_SGL_LENGTH, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
&sc->twe_parent_dmat)) {
twe_printf(sc, "can't allocate parent DMA tag\n");
twe_free(sc);
return(ENOMEM);
}
/*
* Allocate and connect our interrupt.
*/
rid = 0;
if ((sc->twe_irq = bus_alloc_resource(sc->twe_dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE)) == NULL) {
twe_printf(sc, "can't allocate interrupt\n");
twe_free(sc);
return(ENXIO);
}
if (bus_setup_intr(sc->twe_dev, sc->twe_irq, INTR_TYPE_BIO | INTR_ENTROPY, twe_pci_intr, sc, &sc->twe_intr)) {
twe_printf(sc, "can't set up interrupt\n");
twe_free(sc);
return(ENXIO);
}
/*
* Create DMA tag for mapping objects into controller-addressable space.
*/
if (bus_dma_tag_create(sc->twe_parent_dmat, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, TWE_MAX_SGL_LENGTH,/* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
&sc->twe_buffer_dmat)) {
twe_printf(sc, "can't allocate data buffer DMA tag\n");
twe_free(sc);
return(ENOMEM);
}
/*
* Initialise the controller and driver core.
*/
if ((error = twe_setup(sc)))
return(error);
/*
* Print some information about the controller and configuration.
*/
twe_describe_controller(sc);
/*
* Create the control device.
*/
sc->twe_dev_t = make_dev(&twe_cdevsw, device_get_unit(sc->twe_dev), UID_ROOT, GID_OPERATOR,
S_IRUSR | S_IWUSR, "twe%d", device_get_unit(sc->twe_dev));
sc->twe_dev_t->si_drv1 = sc;
/*
* Schedule ourselves to bring the controller up once interrupts are available.
* This isn't strictly necessary, since we disable interrupts while probing the
* controller, but it is more in keeping with common practice for other disk
* devices.
*/
sc->twe_ich.ich_func = twe_intrhook;
sc->twe_ich.ich_arg = sc;
if (config_intrhook_establish(&sc->twe_ich) != 0) {
twe_printf(sc, "can't establish configuration hook\n");
twe_free(sc);
return(ENXIO);
}
return(0);
}
/********************************************************************************
* Free all of the resources associated with (sc).
*
* Should not be called if the controller is active.
*/
static void
twe_free(struct twe_softc *sc)
{
struct twe_request *tr;
debug_called(4);
/* throw away any command buffers */
while ((tr = twe_dequeue_free(sc)) != NULL)
twe_free_request(tr);
/* destroy the data-transfer DMA tag */
if (sc->twe_buffer_dmat)
bus_dma_tag_destroy(sc->twe_buffer_dmat);
/* disconnect the interrupt handler */
if (sc->twe_intr)
bus_teardown_intr(sc->twe_dev, sc->twe_irq, sc->twe_intr);
if (sc->twe_irq != NULL)
bus_release_resource(sc->twe_dev, SYS_RES_IRQ, 0, sc->twe_irq);
/* destroy the parent DMA tag */
if (sc->twe_parent_dmat)
bus_dma_tag_destroy(sc->twe_parent_dmat);
/* release the register window mapping */
if (sc->twe_io != NULL)
bus_release_resource(sc->twe_dev, SYS_RES_IOPORT, TWE_IO_CONFIG_REG, sc->twe_io);
/* destroy control device */
if (sc->twe_dev_t != (dev_t)NULL)
destroy_dev(sc->twe_dev_t);
}
/********************************************************************************
* Disconnect from the controller completely, in preparation for unload.
*/
static int
twe_detach(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
int s, error;
debug_called(4);
error = EBUSY;
s = splbio();
if (sc->twe_state & TWE_STATE_OPEN)
goto out;
/*
* Shut the controller down.
*/
if ((error = twe_shutdown(dev)))
goto out;
twe_free(sc);
error = 0;
out:
splx(s);
return(error);
}
/********************************************************************************
* Bring the controller down to a dormant state and detach all child devices.
*
* Note that we can assume that the bioq on the controller is empty, as we won't
* allow shutdown if any device is open.
*/
static int
twe_shutdown(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
int i, s, error;
debug_called(4);
s = splbio();
error = 0;
/*
* Delete all our child devices.
*/
for (i = 0; i < TWE_MAX_UNITS; i++) {
if (sc->twe_drive[i].td_disk != 0) {
if ((error = device_delete_child(sc->twe_dev, sc->twe_drive[i].td_disk)) != 0)
goto out;
sc->twe_drive[i].td_disk = 0;
}
}
/*
* Bring the controller down.
*/
twe_deinit(sc);
out:
splx(s);
return(error);
}
/********************************************************************************
* Bring the controller to a quiescent state, ready for system suspend.
*/
static int
twe_suspend(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
int s;
debug_called(4);
s = splbio();
sc->twe_state |= TWE_STATE_SUSPEND;
twe_disable_interrupts(sc);
splx(s);
return(0);
}
/********************************************************************************
* Bring the controller back to a state ready for operation.
*/
static int
twe_resume(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
debug_called(4);
sc->twe_state &= ~TWE_STATE_SUSPEND;
twe_enable_interrupts(sc);
return(0);
}
/*******************************************************************************
* Take an interrupt, or be poked by other code to look for interrupt-worthy
* status.
*/
static void
twe_pci_intr(void *arg)
{
twe_intr((struct twe_softc *)arg);
}
/********************************************************************************
* Delayed-startup hook
*/
static void
twe_intrhook(void *arg)
{
struct twe_softc *sc = (struct twe_softc *)arg;
/* pull ourselves off the intrhook chain */
config_intrhook_disestablish(&sc->twe_ich);
/* call core startup routine */
twe_init(sc);
}
/********************************************************************************
* Given a detected drive, attach it to the bio interface.
*
* This is called from twe_init.
*/
void
twe_attach_drive(struct twe_softc *sc, struct twe_drive *dr)
{
char buf[80];
int error;
dr->td_disk = device_add_child(sc->twe_dev, NULL, -1);
if (dr->td_disk == NULL) {
twe_printf(sc, "device_add_child failed\n");
return;
}
device_set_ivars(dr->td_disk, dr);
/*
* XXX It would make sense to test the online/initialising bits, but they seem to be
* always set...
*/
sprintf(buf, "%s, %s", twe_describe_code(twe_table_unittype, dr->td_type),
twe_describe_code(twe_table_unitstate, dr->td_state & TWE_PARAM_UNITSTATUS_MASK));
device_set_desc_copy(dr->td_disk, buf);
if ((error = bus_generic_attach(sc->twe_dev)) != 0)
twe_printf(sc, "bus_generic_attach returned %d\n", error);
}
/********************************************************************************
* Clear a PCI parity error.
*/
void
twe_clear_pci_parity_error(struct twe_softc *sc)
{
TWE_CONTROL(sc, TWE_CONTROL_CLEAR_PARITY_ERROR);
pci_write_config(sc->twe_dev, PCIR_STATUS, TWE_PCI_CLEAR_PARITY_ERROR, 2);
}
/********************************************************************************
* Clear a PCI abort.
*/
void
twe_clear_pci_abort(struct twe_softc *sc)
{
TWE_CONTROL(sc, TWE_CONTROL_CLEAR_PCI_ABORT);
pci_write_config(sc->twe_dev, PCIR_STATUS, TWE_PCI_CLEAR_PCI_ABORT, 2);
}
/********************************************************************************
********************************************************************************
Disk device
********************************************************************************
********************************************************************************/
/*
* Disk device softc
*/
struct twed_softc
{
device_t twed_dev;
dev_t twed_dev_t;
struct twe_softc *twed_controller; /* parent device softc */
struct twe_drive *twed_drive; /* drive data in parent softc */
struct disk twed_disk; /* generic disk handle */
struct devstat twed_stats; /* accounting */
int twed_flags;
#define TWED_OPEN (1<<0) /* drive is open (can't shut down) */
};
/*
* Disk device bus interface
*/
static int twed_probe(device_t dev);
static int twed_attach(device_t dev);
static int twed_detach(device_t dev);
static device_method_t twed_methods[] = {
DEVMETHOD(device_probe, twed_probe),
DEVMETHOD(device_attach, twed_attach),
DEVMETHOD(device_detach, twed_detach),
{ 0, 0 }
};
static driver_t twed_driver = {
"twed",
twed_methods,
sizeof(struct twed_softc)
};
static devclass_t twed_devclass;
#ifdef TWE_OVERRIDE
DRIVER_MODULE(Xtwed, Xtwe, twed_driver, twed_devclass, 0, 0);
#else
DRIVER_MODULE(twed, twe, twed_driver, twed_devclass, 0, 0);
#endif
/*
* Disk device control interface.
*/
static d_open_t twed_open;
static d_close_t twed_close;
static d_strategy_t twed_strategy;
static d_dump_t twed_dump;
#define TWED_CDEV_MAJOR 147
static struct cdevsw twed_cdevsw = {
twed_open,
twed_close,
physread,
physwrite,
noioctl,
nopoll,
nommap,
twed_strategy,
"twed",
TWED_CDEV_MAJOR,
twed_dump,
nopsize,
D_DISK
};
static struct cdevsw tweddisk_cdevsw;
#ifdef FREEBSD_4
static int disks_registered = 0;
#endif
/********************************************************************************
* Handle open from generic layer.
*
* Note that this is typically only called by the diskslice code, and not
* for opens on subdevices (eg. slices, partitions).
*/
static int
twed_open(dev_t dev, int flags, int fmt, d_thread_t *td)
{
struct twed_softc *sc = (struct twed_softc *)dev->si_drv1;
debug_called(4);
if (sc == NULL)
return (ENXIO);
/* check that the controller is up and running */
if (sc->twed_controller->twe_state & TWE_STATE_SHUTDOWN)
return(ENXIO);
sc->twed_disk.d_sectorsize = TWE_BLOCK_SIZE;
sc->twed_disk.d_mediasize = TWE_BLOCK_SIZE * (off_t)sc->twed_drive->td_size;
sc->twed_disk.d_fwsectors = sc->twed_drive->td_sectors;
sc->twed_disk.d_fwheads = sc->twed_drive->td_heads;
sc->twed_flags |= TWED_OPEN;
return (0);
}
/********************************************************************************
* Handle last close of the disk device.
*/
static int
twed_close(dev_t dev, int flags, int fmt, d_thread_t *td)
{
struct twed_softc *sc = (struct twed_softc *)dev->si_drv1;
debug_called(4);
if (sc == NULL)
return (ENXIO);
sc->twed_flags &= ~TWED_OPEN;
return (0);
}
/********************************************************************************
* Handle an I/O request.
*/
static void
twed_strategy(twe_bio *bp)
{
struct twed_softc *sc = (struct twed_softc *)TWE_BIO_SOFTC(bp);
debug_called(4);
TWED_BIO_IN;
/* bogus disk? */
if (sc == NULL) {
TWE_BIO_SET_ERROR(bp, EINVAL);
printf("twe: bio for invalid disk!\n");
TWE_BIO_DONE(bp);
TWED_BIO_OUT;
return;
}
/* perform accounting */
TWE_BIO_STATS_START(bp);
/* queue the bio on the controller */
twe_enqueue_bio(sc->twed_controller, bp);
/* poke the controller to start I/O */
twe_startio(sc->twed_controller);
return;
}
/********************************************************************************
* System crashdump support
*/
int
Here follows the new kernel dumping infrastructure. Caveats: The new savecore program is not complete in the sense that it emulates enough of the old savecores features to do the job, but implements none of the options yet. I would appreciate if a userland hacker could help me out getting savecore to do what we want it to do from a users point of view, compression, email-notification, space reservation etc etc. (send me email if you are interested). Currently, savecore will scan all devices marked as "swap" or "dump" in /etc/fstab _or_ any devices specified on the command-line. All architectures but i386 lack an implementation of dumpsys(), but looking at the i386 version it should be trivial for anybody familiar with the platform(s) to provide this function. Documentation is quite sparse at this time, more to come. Details: ATA and SCSI drivers should work as the dump formatting code has been removed. The IDA, TWE and AAC have not yet been converted. Dumpon now opens the device and uses ioctl(DIOCGKERNELDUMP) to set the device as dumpdev. To implement the "off" argument, /dev/null is used as the device. Savecore will fail if handed any options since they are not (yet) implemented. All devices marked "dump" or "swap" in /etc/fstab will be scanned and dumps found will be saved to diskfiles named from the MD5 hash of the header record. The header record is dumped in readable format in the .info file. The kernel is not saved. Only complete dumps will be saved. All maintainer rights for this code are disclaimed: feel free to improve and extend. Sponsored by: DARPA, NAI Labs
2002-03-31 22:37:00 +00:00
twed_dump(dev_t dev, void *virtual, vm_offset_t physical, off_t offset, size_t length)
{
Here follows the new kernel dumping infrastructure. Caveats: The new savecore program is not complete in the sense that it emulates enough of the old savecores features to do the job, but implements none of the options yet. I would appreciate if a userland hacker could help me out getting savecore to do what we want it to do from a users point of view, compression, email-notification, space reservation etc etc. (send me email if you are interested). Currently, savecore will scan all devices marked as "swap" or "dump" in /etc/fstab _or_ any devices specified on the command-line. All architectures but i386 lack an implementation of dumpsys(), but looking at the i386 version it should be trivial for anybody familiar with the platform(s) to provide this function. Documentation is quite sparse at this time, more to come. Details: ATA and SCSI drivers should work as the dump formatting code has been removed. The IDA, TWE and AAC have not yet been converted. Dumpon now opens the device and uses ioctl(DIOCGKERNELDUMP) to set the device as dumpdev. To implement the "off" argument, /dev/null is used as the device. Savecore will fail if handed any options since they are not (yet) implemented. All devices marked "dump" or "swap" in /etc/fstab will be scanned and dumps found will be saved to diskfiles named from the MD5 hash of the header record. The header record is dumped in readable format in the .info file. The kernel is not saved. Only complete dumps will be saved. All maintainer rights for this code are disclaimed: feel free to improve and extend. Sponsored by: DARPA, NAI Labs
2002-03-31 22:37:00 +00:00
/* XXX: this needs modified to the new dump API */
return (ENXIO);
#if 0
struct twed_softc *twed_sc = (struct twed_softc *)dev->si_drv1;
struct twe_softc *twe_sc = (struct twe_softc *)twed_sc->twed_controller;
u_int count, blkno, secsize;
vm_offset_t addr = 0;
long blkcnt;
int dumppages = MAXDUMPPGS;
int error;
int i;
if ((error = disk_dumpcheck(dev, &count, &blkno, &secsize)))
return(error);
if (!twed_sc || !twe_sc)
return(ENXIO);
blkcnt = howmany(PAGE_SIZE, secsize);
while (count > 0) {
caddr_t va = NULL;
if ((count / blkcnt) < dumppages)
dumppages = count / blkcnt;
for (i = 0; i < dumppages; ++i) {
vm_offset_t a = addr + (i * PAGE_SIZE);
if (is_physical_memory(a))
va = pmap_kenter_temporary(trunc_page(a), i);
else
va = pmap_kenter_temporary(trunc_page(0), i);
}
if ((error = twe_dump_blocks(twe_sc, twed_sc->twed_drive->td_unit, blkno, va,
(PAGE_SIZE * dumppages) / TWE_BLOCK_SIZE)) != 0)
return(error);
if (dumpstatus(addr, (off_t)count * DEV_BSIZE) < 0)
return(EINTR);
blkno += blkcnt * dumppages;
count -= blkcnt * dumppages;
addr += PAGE_SIZE * dumppages;
}
return(0);
Here follows the new kernel dumping infrastructure. Caveats: The new savecore program is not complete in the sense that it emulates enough of the old savecores features to do the job, but implements none of the options yet. I would appreciate if a userland hacker could help me out getting savecore to do what we want it to do from a users point of view, compression, email-notification, space reservation etc etc. (send me email if you are interested). Currently, savecore will scan all devices marked as "swap" or "dump" in /etc/fstab _or_ any devices specified on the command-line. All architectures but i386 lack an implementation of dumpsys(), but looking at the i386 version it should be trivial for anybody familiar with the platform(s) to provide this function. Documentation is quite sparse at this time, more to come. Details: ATA and SCSI drivers should work as the dump formatting code has been removed. The IDA, TWE and AAC have not yet been converted. Dumpon now opens the device and uses ioctl(DIOCGKERNELDUMP) to set the device as dumpdev. To implement the "off" argument, /dev/null is used as the device. Savecore will fail if handed any options since they are not (yet) implemented. All devices marked "dump" or "swap" in /etc/fstab will be scanned and dumps found will be saved to diskfiles named from the MD5 hash of the header record. The header record is dumped in readable format in the .info file. The kernel is not saved. Only complete dumps will be saved. All maintainer rights for this code are disclaimed: feel free to improve and extend. Sponsored by: DARPA, NAI Labs
2002-03-31 22:37:00 +00:00
#endif
}
/********************************************************************************
* Handle completion of an I/O request.
*/
void
twed_intr(twe_bio *bp)
{
debug_called(4);
/* if no error, transfer completed */
if (!TWE_BIO_HAS_ERROR(bp))
TWE_BIO_RESID(bp) = 0;
TWE_BIO_STATS_END(bp);
TWE_BIO_DONE(bp);
TWED_BIO_OUT;
}
/********************************************************************************
* Default probe stub.
*/
static int
twed_probe(device_t dev)
{
return (0);
}
/********************************************************************************
* Attach a unit to the controller.
*/
static int
twed_attach(device_t dev)
{
struct twed_softc *sc;
device_t parent;
dev_t dsk;
debug_called(4);
/* initialise our softc */
sc = device_get_softc(dev);
parent = device_get_parent(dev);
sc->twed_controller = (struct twe_softc *)device_get_softc(parent);
sc->twed_drive = device_get_ivars(dev);
sc->twed_dev = dev;
/* report the drive */
twed_printf(sc, "%uMB (%u sectors)\n",
sc->twed_drive->td_size / ((1024 * 1024) / TWE_BLOCK_SIZE),
sc->twed_drive->td_size);
devstat_add_entry(&sc->twed_stats, "twed", device_get_unit(dev), TWE_BLOCK_SIZE,
DEVSTAT_NO_ORDERED_TAGS,
DEVSTAT_TYPE_STORARRAY | DEVSTAT_TYPE_IF_OTHER,
DEVSTAT_PRIORITY_ARRAY);
/* attach a generic disk device to ourselves */
dsk = disk_create(device_get_unit(dev), &sc->twed_disk, 0, &twed_cdevsw, &tweddisk_cdevsw);
dsk->si_drv1 = sc;
dsk->si_drv2 = &sc->twed_drive->td_unit;
sc->twed_dev_t = dsk;
#ifdef FREEBSD_4
disks_registered++;
#endif
/* set the maximum I/O size to the theoretical maximum allowed by the S/G list size */
dsk->si_iosize_max = (TWE_MAX_SGL_LENGTH - 1) * PAGE_SIZE;
return (0);
}
/********************************************************************************
* Disconnect ourselves from the system.
*/
static int
twed_detach(device_t dev)
{
struct twed_softc *sc = (struct twed_softc *)device_get_softc(dev);
debug_called(4);
if (sc->twed_flags & TWED_OPEN)
return(EBUSY);
devstat_remove_entry(&sc->twed_stats);
#ifdef FREEBSD_4
if (--disks_registered == 0)
cdevsw_remove(&tweddisk_cdevsw);
#else
disk_destroy(sc->twed_dev_t);
#endif
return(0);
}
/********************************************************************************
********************************************************************************
Misc
********************************************************************************
********************************************************************************/
static void twe_setup_data_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error);
static void twe_setup_request_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error);
/********************************************************************************
* Allocate a command buffer
*/
MALLOC_DEFINE(TWE_MALLOC_CLASS, "twe commands", "twe commands");
struct twe_request *
twe_allocate_request(struct twe_softc *sc)
{
struct twe_request *tr;
if ((tr = malloc(sizeof(struct twe_request), TWE_MALLOC_CLASS, M_NOWAIT)) == NULL)
return(NULL);
bzero(tr, sizeof(*tr));
tr->tr_sc = sc;
if (bus_dmamap_create(sc->twe_buffer_dmat, 0, &tr->tr_cmdmap)) {
twe_free_request(tr);
return(NULL);
}
if (bus_dmamap_create(sc->twe_buffer_dmat, 0, &tr->tr_dmamap)) {
bus_dmamap_destroy(sc->twe_buffer_dmat, tr->tr_cmdmap);
twe_free_request(tr);
return(NULL);
}
return(tr);
}
/********************************************************************************
* Permanently discard a command buffer.
*/
void
twe_free_request(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
bus_dmamap_destroy(sc->twe_buffer_dmat, tr->tr_cmdmap);
bus_dmamap_destroy(sc->twe_buffer_dmat, tr->tr_dmamap);
free(tr, TWE_MALLOC_CLASS);
}
/********************************************************************************
* Map/unmap (tr)'s command and data in the controller's addressable space.
*
* These routines ensure that the data which the controller is going to try to
* access is actually visible to the controller, in a machine-independant
* fashion. Due to a hardware limitation, I/O buffers must be 512-byte aligned
* and we take care of that here as well.
*/
static void
twe_setup_data_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
struct twe_request *tr = (struct twe_request *)arg;
TWE_Command *cmd = &tr->tr_command;
int i;
debug_called(4);
/* save base of first segment in command (applicable if there only one segment) */
tr->tr_dataphys = segs[0].ds_addr;
/* correct command size for s/g list size */
tr->tr_command.generic.size += 2 * nsegments;
/*
* Due to the fact that parameter and I/O commands have the scatter/gather list in
* different places, we need to determine which sort of command this actually is
* before we can populate it correctly.
*/
switch(cmd->generic.opcode) {
case TWE_OP_GET_PARAM:
case TWE_OP_SET_PARAM:
cmd->generic.sgl_offset = 2;
for (i = 0; i < nsegments; i++) {
cmd->param.sgl[i].address = segs[i].ds_addr;
cmd->param.sgl[i].length = segs[i].ds_len;
}
for (; i < TWE_MAX_SGL_LENGTH; i++) { /* XXX necessary? */
cmd->param.sgl[i].address = 0;
cmd->param.sgl[i].length = 0;
}
break;
case TWE_OP_READ:
case TWE_OP_WRITE:
cmd->generic.sgl_offset = 3;
for (i = 0; i < nsegments; i++) {
cmd->io.sgl[i].address = segs[i].ds_addr;
cmd->io.sgl[i].length = segs[i].ds_len;
}
for (; i < TWE_MAX_SGL_LENGTH; i++) { /* XXX necessary? */
cmd->io.sgl[i].address = 0;
cmd->io.sgl[i].length = 0;
}
break;
default:
/* no s/g list, nothing to do */
break;
}
}
static void
twe_setup_request_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
struct twe_request *tr = (struct twe_request *)arg;
debug_called(4);
/* command can't cross a page boundary */
tr->tr_cmdphys = segs[0].ds_addr;
}
void
twe_map_request(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
/*
* Map the command into bus space.
*/
bus_dmamap_load(sc->twe_buffer_dmat, tr->tr_cmdmap, &tr->tr_command, sizeof(tr->tr_command),
twe_setup_request_dmamap, tr, 0);
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_cmdmap, BUS_DMASYNC_PREWRITE);
/*
* If the command involves data, map that too.
*/
if (tr->tr_data != NULL) {
/*
* Data must be 64-byte aligned; allocate a fixup buffer if it's not.
*/
if (((vm_offset_t)tr->tr_data % TWE_ALIGNMENT) != 0) {
tr->tr_realdata = tr->tr_data; /* save pointer to 'real' data */
tr->tr_flags |= TWE_CMD_ALIGNBUF;
tr->tr_data = malloc(tr->tr_length, TWE_MALLOC_CLASS, M_NOWAIT); /* XXX check result here */
}
/*
* Map the data buffer into bus space and build the s/g list.
*/
bus_dmamap_load(sc->twe_buffer_dmat, tr->tr_dmamap, tr->tr_data, tr->tr_length,
twe_setup_data_dmamap, tr, 0);
if (tr->tr_flags & TWE_CMD_DATAIN)
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_PREREAD);
if (tr->tr_flags & TWE_CMD_DATAOUT) {
/* if we're using an alignment buffer, and we're writing data, copy the real data out */
if (tr->tr_flags & TWE_CMD_ALIGNBUF)
bcopy(tr->tr_realdata, tr->tr_data, tr->tr_length);
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_PREWRITE);
}
}
}
void
twe_unmap_request(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
/*
* Unmap the command from bus space.
*/
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_cmdmap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->twe_buffer_dmat, tr->tr_cmdmap);
/*
* If the command involved data, unmap that too.
*/
if (tr->tr_data != NULL) {
if (tr->tr_flags & TWE_CMD_DATAIN) {
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_POSTREAD);
/* if we're using an alignment buffer, and we're reading data, copy the real data in */
if (tr->tr_flags & TWE_CMD_ALIGNBUF)
bcopy(tr->tr_data, tr->tr_realdata, tr->tr_length);
}
if (tr->tr_flags & TWE_CMD_DATAOUT)
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->twe_buffer_dmat, tr->tr_dmamap);
}
/* free alignment buffer if it was used */
if (tr->tr_flags & TWE_CMD_ALIGNBUF) {
free(tr->tr_data, TWE_MALLOC_CLASS);
tr->tr_data = tr->tr_realdata; /* restore 'real' data pointer */
}
}
#ifdef TWE_DEBUG
/********************************************************************************
* Print current controller status, call from DDB.
*/
void
twe_report(void)
{
struct twe_softc *sc;
int i, s;
s = splbio();
for (i = 0; (sc = devclass_get_softc(twe_devclass, i)) != NULL; i++)
twe_print_controller(sc);
printf("twed: total bio count in %u out %u\n", twed_bio_in, twed_bio_out);
splx(s);
}
#endif