freebsd-skq/sys/dev/dpaa/if_dtsec_fdt.c

238 lines
6.5 KiB
C
Raw Normal View History

Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
/*-
* Copyright (c) 2012 Semihalf.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <powerpc/mpc85xx/mpc85xx.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include "miibus_if.h"
#include <contrib/ncsw/inc/Peripherals/fm_port_ext.h>
#include <contrib/ncsw/inc/xx_ext.h>
#include "if_dtsec.h"
#include "fman.h"
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
static int dtsec_fdt_probe(device_t dev);
static int dtsec_fdt_attach(device_t dev);
static device_method_t dtsec_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, dtsec_fdt_probe),
DEVMETHOD(device_attach, dtsec_fdt_attach),
DEVMETHOD(device_detach, dtsec_detach),
DEVMETHOD(device_shutdown, dtsec_shutdown),
DEVMETHOD(device_suspend, dtsec_suspend),
DEVMETHOD(device_resume, dtsec_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, dtsec_miibus_readreg),
DEVMETHOD(miibus_writereg, dtsec_miibus_writereg),
DEVMETHOD(miibus_statchg, dtsec_miibus_statchg),
{ 0, 0 }
};
static driver_t dtsec_driver = {
"dtsec",
dtsec_methods,
sizeof(struct dtsec_softc),
};
static devclass_t dtsec_devclass;
DRIVER_MODULE(dtsec, dpaa, dtsec_driver, dtsec_devclass, 0, 0);
DRIVER_MODULE(miibus, dtsec, miibus_driver, miibus_devclass, 0, 0);
MODULE_DEPEND(dtsec, ether, 1, 1, 1);
MODULE_DEPEND(dtsec, miibus, 1, 1, 1);
static int
dtsec_fdt_probe(device_t dev)
{
if (!ofw_bus_is_compatible(dev, "fsl,dpa-ethernet"))
return (ENXIO);
device_set_desc(dev, "Freescale Data Path Triple Speed Ethernet "
"Controller");
return (BUS_PROBE_DEFAULT);
}
static int
find_mdio(phandle_t phy_node, device_t mac, device_t *mdio_dev)
{
device_t bus;
while (phy_node > 0) {
if (ofw_bus_node_is_compatible(phy_node, "fsl,fman-mdio"))
break;
phy_node = OF_parent(phy_node);
}
if (phy_node <= 0)
return (ENOENT);
if (fman_get_dev(&bus) < 0)
return (ENOENT);
*mdio_dev = ofw_bus_find_child_device_by_phandle(bus, phy_node);
return (0);
}
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
static int
dtsec_fdt_attach(device_t dev)
{
struct dtsec_softc *sc;
phandle_t node, enet_node, phy_node;
phandle_t fman_rxtx_node[2];
char phy_type[6];
sc = device_get_softc(dev);
node = ofw_bus_get_node(dev);
if (OF_getprop(node, "fsl,fman-mac", (void *)&enet_node,
sizeof(enet_node)) == -1) {
device_printf(dev, "Could not load fsl,fman-mac property "
"from DTS\n");
return (ENXIO);
}
enet_node = OF_instance_to_package(enet_node);
if (OF_getprop(enet_node, "local-mac-address",
(void *)sc->sc_mac_addr, 6) == -1) {
device_printf(dev,
"Could not load local-mac-addr property from DTS\n");
return (ENXIO);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
}
/* Get link speed */
if (fdt_is_compatible(enet_node, "fsl,fman-1g-mac") != 0)
sc->sc_eth_dev_type = ETH_DTSEC;
else if (fdt_is_compatible(enet_node, "fsl,fman-10g-mac") != 0)
sc->sc_eth_dev_type = ETH_10GSEC;
else
return(ENXIO);
/* Get MAC memory offset in SoC */
if (OF_getprop(enet_node, "reg", (void *)&sc->sc_mac_mem_offset,
sizeof(sc->sc_mac_mem_offset)) <= 0)
return (ENXIO);
/* Get PHY address */
if (OF_getprop(enet_node, "phy-handle", (void *)&phy_node,
sizeof(phy_node)) <= 0)
return (ENXIO);
phy_node = OF_instance_to_package(phy_node);
if (OF_getprop(phy_node, "reg", (void *)&sc->sc_phy_addr,
sizeof(sc->sc_phy_addr)) <= 0)
return (ENXIO);
if (find_mdio(phy_node, dev, &sc->sc_mdio) != 0)
return (ENXIO);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
/* Get PHY connection type */
if (OF_getprop(enet_node, "phy-connection-type", (void *)phy_type,
sizeof(phy_type)) <= 0)
return (ENXIO);
if (!strcmp(phy_type, "sgmii"))
sc->sc_mac_enet_mode = e_ENET_MODE_SGMII_1000;
else if (!strcmp(phy_type, "rgmii"))
sc->sc_mac_enet_mode = e_ENET_MODE_RGMII_1000;
else if (!strcmp(phy_type, "xgmii"))
/* We set 10 Gigabit mode flag however we don't support it */
sc->sc_mac_enet_mode = e_ENET_MODE_XGMII_10000;
else
return (ENXIO);
/* Get RX/TX port handles */
if (OF_getprop(enet_node, "fsl,port-handles", (void *)fman_rxtx_node,
sizeof(fman_rxtx_node)) <= 0)
return (ENXIO);
if (fman_rxtx_node[0] == 0)
return (ENXIO);
if (fman_rxtx_node[1] == 0)
return (ENXIO);
fman_rxtx_node[0] = OF_instance_to_package(fman_rxtx_node[0]);
fman_rxtx_node[1] = OF_instance_to_package(fman_rxtx_node[1]);
if (fdt_is_compatible(fman_rxtx_node[0], "fsl,fman-port-1g-rx") == 0)
return (ENXIO);
if (fdt_is_compatible(fman_rxtx_node[1], "fsl,fman-port-1g-tx") == 0)
return (ENXIO);
/* Get RX port HW id */
if (OF_getprop(fman_rxtx_node[0], "reg", (void *)&sc->sc_port_rx_hw_id,
sizeof(sc->sc_port_rx_hw_id)) <= 0)
return (ENXIO);
/* Get TX port HW id */
if (OF_getprop(fman_rxtx_node[1], "reg", (void *)&sc->sc_port_tx_hw_id,
sizeof(sc->sc_port_tx_hw_id)) <= 0)
return (ENXIO);
/* Get QMan channel */
if (OF_getprop(fman_rxtx_node[1], "fsl,qman-channel-id",
(void *)&sc->sc_port_tx_qman_chan,
sizeof(sc->sc_port_tx_qman_chan)) <= 0)
return (ENXIO);
return (dtsec_attach(dev));
}