freebsd-skq/sys/dev/wi/if_wivar.h

190 lines
5.9 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-4-Clause
*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
* Copyright (c) 2002 M Warner Losh <imp@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Encryption controls. We can enable or disable encryption as
* well as specify up to 4 encryption keys. We can also specify
* which of the four keys will be used for transmit encryption.
*/
#define WI_RID_ENCRYPTION 0xFC20
#define WI_RID_AUTHTYPE 0xFC21
#define WI_RID_DEFLT_CRYPT_KEYS 0xFCB0
#define WI_RID_TX_CRYPT_KEY 0xFCB1
#define WI_RID_WEP_AVAIL 0xFD4F
#define WI_RID_P2_TX_CRYPT_KEY 0xFC23
#define WI_RID_P2_CRYPT_KEY0 0xFC24
#define WI_RID_P2_CRYPT_KEY1 0xFC25
#define WI_RID_MICROWAVE_OVEN 0xFC25
#define WI_RID_P2_CRYPT_KEY2 0xFC26
#define WI_RID_P2_CRYPT_KEY3 0xFC27
#define WI_RID_P2_ENCRYPTION 0xFC28
#define WI_RID_ROAMING_MODE 0xFC2D
#define WI_RID_CUR_TX_RATE 0xFD44 /* current TX rate */
#define WI_MAX_AID 256 /* max stations for ap operation */
struct wi_vap {
struct ieee80211vap wv_vap;
void (*wv_recv_mgmt)(struct ieee80211_node *, struct mbuf *,
Begin plumbing ieee80211_rx_stats through the receive path. Smart NICs with firmware (eg wpi, iwn, the new atheros parts, the intel 7260 series, etc) support doing a lot of things in firmware. This includes but isn't limited to things like scanning, sending probe requests and receiving probe responses. However, net80211 doesn't know about any of this - it still drives the whole scan/probe infrastructure itself. In order to move towards suppoting smart NICs, the receive path needs to know about the channel/details for each received packet. In at least the iwn and 7260 firmware (and I believe wpi, but I haven't tried it yet) it will do the scanning, power-save and off-channel buffering for you - all you need to do is handle receiving beacons and probe responses on channels that aren't what you're currently on. However the whole receive path is peppered with ic->ic_curchan and manual scan/powersave handling. The beacon parsing code also checks ic->ic_curchan to determine if the received beacon is on the correct channel or not.[1] So: * add freq/ieee values to ieee80211_rx_stats; * change ieee80211_parse_beacon() to accept the 'current' channel as an argument; * modify the iv_input() and iv_recv_mgmt() methods to include the rx_stats; * add a new method - ieee80211_lookup_channel_rxstats() - that looks up a channel based on the contents of ieee80211_rx_stats; * if it exists, use it in the mgmt path to switch the current channel (which still defaults to ic->ic_curchan) over to something determined by rx_stats. This is enough to kick-start scan offload support in the Intel 7260 driver that Rui/I are working on. It also is a good start for scan offload support for a handful of existing NICs (wpi, iwn, some USB parts) and it'll very likely dramatically improve stability/performance there. It's not the whole thing - notably, we don't need to do powersave, we should not scan all channels, and we should leave probe request sending to the firmware and not do it ourselves. But, this allows for continued development on the above features whilst actually having a somewhat working NIC. TODO: * Finish tidying up how the net80211 input path works. Right now ieee80211_input / ieee80211_input_all act as the top-level that everything feeds into; it should change so the MIMO input routines are those and the legacy routines are phased out. * The band selection should be done by the driver, not by the net80211 layer. * ieee80211_lookup_channel_rxstats() only determines 11b or 11g channels for now - this is enough for scanning, but not 100% true in all cases. If we ever need to handle off-channel scan support for things like static-40MHz or static-80MHz, or turbo-G, or half/quarter rates, then we should extend this. [1] This is a side effect of frequency-hopping and CCK modes - you can receive beacons when you think you're on a different channel. In particular, CCK (which is used by the low 11b rates, eg beacons!) is decodable from adjacent channels - just at a low SNR. FH is a side effect of having the hardware/firmware do the frequency hopping - it may pick up beacons transmitted from other FH networks that are in a different phase of hopping frequencies.
2015-05-25 16:37:41 +00:00
int, const struct ieee80211_rx_stats *rxs, int, int);
int (*wv_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
};
#define WI_VAP(vap) ((struct wi_vap *)(vap))
struct wi_softc {
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct ieee80211com sc_ic;
struct mbufq sc_snd;
device_t sc_dev;
struct mtx sc_mtx;
struct callout sc_watchdog;
int sc_unit;
int wi_gone;
int sc_enabled;
int sc_reset;
int sc_firmware_type;
#define WI_NOTYPE 0
#define WI_LUCENT 1
#define WI_INTERSIL 2
#define WI_SYMBOL 3
int sc_pri_firmware_ver; /* Primary firmware */
int sc_sta_firmware_ver; /* Station firmware */
unsigned int sc_nic_id; /* Type of NIC */
char * sc_nic_name;
int wi_bus_type; /* Bus attachment type */
struct resource * local;
int local_rid;
struct resource * iobase;
int iobase_rid;
struct resource * irq;
int irq_rid;
struct resource * mem;
int mem_rid;
bus_space_handle_t wi_localhandle;
bus_space_tag_t wi_localtag;
bus_space_handle_t wi_bhandle;
bus_space_tag_t wi_btag;
bus_space_handle_t wi_bmemhandle;
bus_space_tag_t wi_bmemtag;
void * wi_intrhand;
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
struct ieee80211_channel *wi_channel;
int wi_io_addr;
int wi_cmd_count;
int sc_flags;
int sc_bap_id;
int sc_bap_off;
int sc_porttype;
u_int16_t sc_portnum;
u_int16_t sc_encryption;
u_int16_t sc_monitor_port;
u_int16_t sc_chanmask;
/* RSSI interpretation */
u_int16_t sc_min_rssi; /* clamp sc_min_rssi < RSSI */
u_int16_t sc_max_rssi; /* clamp RSSI < sc_max_rssi */
u_int16_t sc_dbm_offset; /* dBm ~ RSSI - sc_dbm_offset */
int sc_buflen; /* TX buffer size */
int sc_ntxbuf;
#define WI_NTXBUF 3
struct {
int d_fid;
int d_len;
} sc_txd[WI_NTXBUF]; /* TX buffers */
int sc_txnext; /* index of next TX */
int sc_txcur; /* index of current TX*/
int sc_tx_timer;
struct wi_counters sc_stats;
u_int16_t sc_ibss_port;
struct timeval sc_last_syn;
int sc_false_syns;
u_int16_t sc_txbuf[IEEE80211_MAX_LEN/2];
struct wi_tx_radiotap_header sc_tx_th;
struct wi_rx_radiotap_header sc_rx_th;
};
/* maximum consecutive false change-of-BSSID indications */
#define WI_MAX_FALSE_SYNS 10
#define WI_FLAGS_HAS_ENHSECURITY 0x0001
#define WI_FLAGS_HAS_WPASUPPORT 0x0002
#define WI_FLAGS_HAS_ROAMING 0x0020
#define WI_FLAGS_HAS_FRAGTHR 0x0200
#define WI_FLAGS_HAS_DBMADJUST 0x0400
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
#define WI_FLAGS_RUNNING 0x0800
#define WI_FLAGS_PROMISC 0x1000
struct wi_card_ident {
u_int16_t card_id;
char *card_name;
u_int8_t firm_type;
};
#define WI_PRISM_MIN_RSSI 0x1b
#define WI_PRISM_MAX_RSSI 0x9a
#define WI_PRISM_DBM_OFFSET 100 /* XXX */
#define WI_LUCENT_MIN_RSSI 47
#define WI_LUCENT_MAX_RSSI 138
#define WI_LUCENT_DBM_OFFSET 149
#define WI_RSSI_TO_DBM(sc, rssi) (MIN((sc)->sc_max_rssi, \
MAX((sc)->sc_min_rssi, (rssi))) - (sc)->sc_dbm_offset)
#define WI_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define WI_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define WI_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
int wi_attach(device_t);
int wi_detach(device_t);
int wi_shutdown(device_t);
int wi_alloc(device_t, int);
void wi_free(device_t);
extern devclass_t wi_devclass;
void wi_intr(void *);
int wi_mgmt_xmit(struct wi_softc *, caddr_t, int);
void wi_stop(struct wi_softc *, int);
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
void wi_init(struct wi_softc *);