freebsd-skq/sys/geom/vinum/geom_vinum_rename.c

265 lines
7.2 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2005 Chris Jones
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Chris Jones
* thanks to the support of Google's Summer of Code program and
* mentoring by Lukas Ertl.
2005-11-20 12:14:18 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
2005-11-20 12:14:18 +00:00
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/libkern.h>
#include <sys/malloc.h>
#include <geom/geom.h>
#include <geom/geom_dbg.h>
#include <geom/vinum/geom_vinum_var.h>
#include <geom/vinum/geom_vinum.h>
void
gv_rename(struct g_geom *gp, struct gctl_req *req)
{
struct gv_softc *sc;
struct gv_volume *v;
struct gv_plex *p;
struct gv_sd *s;
struct gv_drive *d;
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
char *newname, *object, *name;
int *flags, type;
sc = gp->softc;
flags = gctl_get_paraml(req, "flags", sizeof(*flags));
if (flags == NULL) {
gctl_error(req, "no flags given");
return;
}
newname = gctl_get_param(req, "newname", NULL);
if (newname == NULL) {
gctl_error(req, "no new name given");
return;
}
object = gctl_get_param(req, "object", NULL);
if (object == NULL) {
gctl_error(req, "no object given");
return;
}
type = gv_object_type(sc, object);
switch (type) {
case GV_TYPE_VOL:
v = gv_find_vol(sc, object);
if (v == NULL) {
gctl_error(req, "unknown volume '%s'", object);
return;
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
name = g_malloc(GV_MAXVOLNAME, M_WAITOK | M_ZERO);
strlcpy(name, newname, GV_MAXVOLNAME);
gv_post_event(sc, GV_EVENT_RENAME_VOL, v, name, *flags, 0);
break;
case GV_TYPE_PLEX:
p = gv_find_plex(sc, object);
if (p == NULL) {
gctl_error(req, "unknown plex '%s'", object);
return;
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
name = g_malloc(GV_MAXPLEXNAME, M_WAITOK | M_ZERO);
strlcpy(name, newname, GV_MAXPLEXNAME);
gv_post_event(sc, GV_EVENT_RENAME_PLEX, p, name, *flags, 0);
break;
case GV_TYPE_SD:
s = gv_find_sd(sc, object);
if (s == NULL) {
gctl_error(req, "unknown subdisk '%s'", object);
return;
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
name = g_malloc(GV_MAXSDNAME, M_WAITOK | M_ZERO);
strlcpy(name, newname, GV_MAXSDNAME);
gv_post_event(sc, GV_EVENT_RENAME_SD, s, name, *flags, 0);
break;
case GV_TYPE_DRIVE:
d = gv_find_drive(sc, object);
if (d == NULL) {
gctl_error(req, "unknown drive '%s'", object);
return;
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
name = g_malloc(GV_MAXDRIVENAME, M_WAITOK | M_ZERO);
strlcpy(name, newname, GV_MAXDRIVENAME);
gv_post_event(sc, GV_EVENT_RENAME_DRIVE, d, name, *flags, 0);
break;
default:
gctl_error(req, "unknown object '%s'", object);
return;
}
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
int
gv_rename_drive(struct gv_softc *sc, struct gv_drive *d, char *newname,
int flags)
{
struct gv_sd *s;
KASSERT(d != NULL, ("gv_rename_drive: NULL d"));
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
if (gv_object_type(sc, newname) != GV_ERR_NOTFOUND) {
G_VINUM_DEBUG(1, "drive name '%s' already in use", newname);
return (GV_ERR_NAMETAKEN);
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(d->name, newname, sizeof(d->name));
if (d->hdr != NULL)
strlcpy(d->hdr->label.name, newname, sizeof(d->hdr->label.name));
LIST_FOREACH(s, &d->subdisks, from_drive)
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(s->drive, d->name, sizeof(s->drive));
return (0);
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
int
gv_rename_plex(struct gv_softc *sc, struct gv_plex *p, char *newname, int flags)
{
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
char newsd[GV_MAXSDNAME];
struct gv_sd *s;
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
char *ptr;
int err;
KASSERT(p != NULL, ("gv_rename_plex: NULL p"));
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
if (gv_object_type(sc, newname) != GV_ERR_NOTFOUND) {
G_VINUM_DEBUG(1, "plex name '%s' already in use", newname);
return (GV_ERR_NAMETAKEN);
}
/*
* Locate the plex number part of the plex names.
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
* XXX: might be a good idea to sanitize input a bit more
*/
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
ptr = strrchr(newname, '.');
if (ptr == NULL) {
G_VINUM_DEBUG(0, "proposed plex name '%s' is not a valid plex "
"name", newname);
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
return (GV_ERR_INVNAME);
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(p->name, newname, sizeof(p->name));
/* Fix up references and potentially rename subdisks. */
LIST_FOREACH(s, &p->subdisks, in_plex) {
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(s->plex, p->name, sizeof(s->plex));
if (flags & GV_FLAG_R) {
/*
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
* Look for the two last dots in the string, and assume
* that the old value was ok.
*/
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
ptr = strrchr(s->name, '.');
if (ptr == NULL)
return (GV_ERR_INVNAME);
ptr++;
snprintf(newsd, sizeof(newsd), "%s.%s", p->name, ptr);
err = gv_rename_sd(sc, s, newsd, flags);
if (err)
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
return (err);
}
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
return (0);
}
/*
* gv_rename_sd: renames a subdisk. Note that the 'flags' argument is ignored,
* since there are no structures below a subdisk. Similarly, we don't have to
* clean up any references elsewhere to the subdisk's name.
*/
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
int
gv_rename_sd(struct gv_softc *sc, struct gv_sd *s, char *newname, int flags)
{
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
char *dot1, *dot2;
KASSERT(s != NULL, ("gv_rename_sd: NULL s"));
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
if (gv_object_type(sc, newname) != GV_ERR_NOTFOUND) {
G_VINUM_DEBUG(1, "subdisk name %s already in use", newname);
return (GV_ERR_NAMETAKEN);
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
/* Locate the sd number part of the sd names. */
dot1 = strchr(newname, '.');
if (dot1 == NULL || (dot2 = strchr(dot1 + 1, '.')) == NULL) {
G_VINUM_DEBUG(0, "proposed sd name '%s' is not a valid sd name",
newname);
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
return (GV_ERR_INVNAME);
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(s->name, newname, sizeof(s->name));
return (0);
}
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
int
gv_rename_vol(struct gv_softc *sc, struct gv_volume *v, char *newname,
int flags)
{
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
struct g_provider *pp;
struct gv_plex *p;
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
char newplex[GV_MAXPLEXNAME], *ptr;
int err;
KASSERT(v != NULL, ("gv_rename_vol: NULL v"));
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
pp = v->provider;
KASSERT(pp != NULL, ("gv_rename_vol: NULL pp"));
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
if (gv_object_type(sc, newname) != GV_ERR_NOTFOUND) {
G_VINUM_DEBUG(1, "volume name %s already in use", newname);
return (GV_ERR_NAMETAKEN);
}
/* Rename the volume. */
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(v->name, newname, sizeof(v->name));
/* Fix up references and potentially rename plexes. */
LIST_FOREACH(p, &v->plexes, in_volume) {
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
strlcpy(p->volume, v->name, sizeof(p->volume));
if (flags & GV_FLAG_R) {
/*
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
* Look for the last dot in the string, and assume that
* the old value was ok.
*/
Import the gvinum work that have been done during and after Summer of Code 2007. The work have been under testing and fixing since then, and it is mature enough to be put into HEAD for further testing. A lot have changed in this time, and here are the most important: - Gvinum now uses one single workerthread instead of one thread for each volume and each plex. The reason for this is that the previous scheme was very complex, and was the cause of many of the bugs discovered in gvinum. Instead, gvinum now uses one worker thread with an event queue, quite similar to what used in gmirror. - The rebuild/grow/initialize/parity check routines no longer runs in separate threads, but are run as regular I/O requests with special flags. This made it easier to support mounted growing and parity rebuild. - Support for growing striped and raid5-plexes, meaning that one can extend the volumes for these plex types in addition to the concat type. Also works while the volume is mounted. - Implementation of many of the missing commands from the old vinum: attach/detach, start (was partially implemented), stop (was partially implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes with one plex of these organizations). - The parity check and rebuild no longer goes between userland/kernel, meaning that the gvinum command will not stay and wait forever for the rebuild to finish. You can instead watch the status with the list command. - Many problems with gvinum have been reported since 5.x, and some has been hard to fix due to the complicated architecture. Hopefully, it should be more stable and better handle edge cases that previously made gvinum crash. - Failed drives no longer disappears entirely, but now leave behind a dummy drive that makes sure the original state is not forgotten in case the system is rebooted between drive failures/swaps. - Update manpage to reflect new commands and extend it with some examples. Sponsored by: Google Summer of Code 2007 Mentored by: le Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00
ptr = strrchr(p->name, '.');
ptr++;
snprintf(newplex, sizeof(newplex), "%s.%s", v->name, ptr);
err = gv_rename_plex(sc, p, newplex, flags);
if (err)
return (err);
}
}
2005-11-20 12:14:18 +00:00
return (0);
}