freebsd-skq/sbin/ifconfig/ifieee80211.c

5303 lines
135 KiB
C
Raw Normal View History

/*
* Copyright 2001 The Aerospace Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of The Aerospace Corporation may not be used to endorse or
* promote products derived from this software.
*
* THIS SOFTWARE IS PROVIDED BY THE AEROSPACE CORPORATION ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AEROSPACE CORPORATION BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*-
* Copyright (c) 1997, 1998, 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <sys/time.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_media.h>
#include <net/route.h>
#include <net80211/ieee80211_ioctl.h>
#include <net80211/ieee80211_freebsd.h>
#include <net80211/ieee80211_superg.h>
#include <net80211/ieee80211_tdma.h>
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
#include <net80211/ieee80211_mesh.h>
#include <assert.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <stdarg.h>
#include <stddef.h> /* NB: for offsetof */
#include "ifconfig.h"
#include <lib80211/lib80211_regdomain.h>
#include <lib80211/lib80211_ioctl.h>
#ifndef IEEE80211_FIXED_RATE_NONE
#define IEEE80211_FIXED_RATE_NONE 0xff
#endif
/* XXX need these publicly defined or similar */
#ifndef IEEE80211_NODE_AUTH
#define IEEE80211_NODE_AUTH 0x000001 /* authorized for data */
#define IEEE80211_NODE_QOS 0x000002 /* QoS enabled */
#define IEEE80211_NODE_ERP 0x000004 /* ERP enabled */
#define IEEE80211_NODE_PWR_MGT 0x000010 /* power save mode enabled */
#define IEEE80211_NODE_AREF 0x000020 /* authentication ref held */
#define IEEE80211_NODE_HT 0x000040 /* HT enabled */
#define IEEE80211_NODE_HTCOMPAT 0x000080 /* HT setup w/ vendor OUI's */
#define IEEE80211_NODE_WPS 0x000100 /* WPS association */
#define IEEE80211_NODE_TSN 0x000200 /* TSN association */
#define IEEE80211_NODE_AMPDU_RX 0x000400 /* AMPDU rx enabled */
#define IEEE80211_NODE_AMPDU_TX 0x000800 /* AMPDU tx enabled */
#define IEEE80211_NODE_MIMO_PS 0x001000 /* MIMO power save enabled */
#define IEEE80211_NODE_MIMO_RTS 0x002000 /* send RTS in MIMO PS */
#define IEEE80211_NODE_RIFS 0x004000 /* RIFS enabled */
#define IEEE80211_NODE_SGI20 0x008000 /* Short GI in HT20 enabled */
#define IEEE80211_NODE_SGI40 0x010000 /* Short GI in HT40 enabled */
#define IEEE80211_NODE_ASSOCID 0x020000 /* xmit requires associd */
#define IEEE80211_NODE_AMSDU_RX 0x040000 /* AMSDU rx enabled */
#define IEEE80211_NODE_AMSDU_TX 0x080000 /* AMSDU tx enabled */
#endif
#define MAXCHAN 1536 /* max 1.5K channels */
#define MAXCOL 78
static int col;
static char spacer;
static void LINE_INIT(char c);
static void LINE_BREAK(void);
static void LINE_CHECK(const char *fmt, ...);
static const char *modename[IEEE80211_MODE_MAX] = {
[IEEE80211_MODE_AUTO] = "auto",
[IEEE80211_MODE_11A] = "11a",
[IEEE80211_MODE_11B] = "11b",
[IEEE80211_MODE_11G] = "11g",
[IEEE80211_MODE_FH] = "fh",
[IEEE80211_MODE_TURBO_A] = "turboA",
[IEEE80211_MODE_TURBO_G] = "turboG",
[IEEE80211_MODE_STURBO_A] = "sturbo",
[IEEE80211_MODE_11NA] = "11na",
[IEEE80211_MODE_11NG] = "11ng",
[IEEE80211_MODE_HALF] = "half",
[IEEE80211_MODE_QUARTER] = "quarter"
};
static void set80211(int s, int type, int val, int len, void *data);
static int get80211(int s, int type, void *data, int len);
static int get80211len(int s, int type, void *data, int len, int *plen);
static int get80211val(int s, int type, int *val);
static const char *get_string(const char *val, const char *sep,
u_int8_t *buf, int *lenp);
static void print_string(const u_int8_t *buf, int len);
static void print_regdomain(const struct ieee80211_regdomain *, int);
static void print_channels(int, const struct ieee80211req_chaninfo *,
int allchans, int verbose);
static void regdomain_makechannels(struct ieee80211_regdomain_req *,
const struct ieee80211_devcaps_req *);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static const char *mesh_linkstate_string(uint8_t state);
static struct ieee80211req_chaninfo *chaninfo;
static struct ieee80211_regdomain regdomain;
static int gotregdomain = 0;
static struct ieee80211_roamparams_req roamparams;
static int gotroam = 0;
static struct ieee80211_txparams_req txparams;
static int gottxparams = 0;
static struct ieee80211_channel curchan;
static int gotcurchan = 0;
static struct ifmediareq *ifmr;
static int htconf = 0;
static int gothtconf = 0;
static void
gethtconf(int s)
{
if (gothtconf)
return;
if (get80211val(s, IEEE80211_IOC_HTCONF, &htconf) < 0)
warn("unable to get HT configuration information");
gothtconf = 1;
}
/*
* Collect channel info from the kernel. We use this (mostly)
* to handle mapping between frequency and IEEE channel number.
*/
static void
getchaninfo(int s)
{
if (chaninfo != NULL)
return;
chaninfo = malloc(IEEE80211_CHANINFO_SIZE(MAXCHAN));
if (chaninfo == NULL)
errx(1, "no space for channel list");
if (get80211(s, IEEE80211_IOC_CHANINFO, chaninfo,
IEEE80211_CHANINFO_SIZE(MAXCHAN)) < 0)
err(1, "unable to get channel information");
ifmr = ifmedia_getstate(s);
gethtconf(s);
}
static struct regdata *
getregdata(void)
{
static struct regdata *rdp = NULL;
if (rdp == NULL) {
rdp = lib80211_alloc_regdata();
if (rdp == NULL)
errx(-1, "missing or corrupted regdomain database");
}
return rdp;
}
/*
* Given the channel at index i with attributes from,
* check if there is a channel with attributes to in
* the channel table. With suitable attributes this
* allows the caller to look for promotion; e.g. from
* 11b > 11g.
*/
static int
canpromote(int i, int from, int to)
{
const struct ieee80211_channel *fc = &chaninfo->ic_chans[i];
int j;
if ((fc->ic_flags & from) != from)
return i;
/* NB: quick check exploiting ordering of chans w/ same frequency */
if (i+1 < chaninfo->ic_nchans &&
chaninfo->ic_chans[i+1].ic_freq == fc->ic_freq &&
(chaninfo->ic_chans[i+1].ic_flags & to) == to)
return i+1;
/* brute force search in case channel list is not ordered */
for (j = 0; j < chaninfo->ic_nchans; j++) {
const struct ieee80211_channel *tc = &chaninfo->ic_chans[j];
if (j != i &&
tc->ic_freq == fc->ic_freq && (tc->ic_flags & to) == to)
return j;
}
return i;
}
/*
* Handle channel promotion. When a channel is specified with
* only a frequency we want to promote it to the ``best'' channel
* available. The channel list has separate entries for 11b, 11g,
* 11a, and 11n[ga] channels so specifying a frequency w/o any
* attributes requires we upgrade, e.g. from 11b -> 11g. This
* gets complicated when the channel is specified on the same
* command line with a media request that constrains the available
* channe list (e.g. mode 11a); we want to honor that to avoid
* confusing behaviour.
*/
static int
promote(int i)
{
/*
* Query the current mode of the interface in case it's
* constrained (e.g. to 11a). We must do this carefully
* as there may be a pending ifmedia request in which case
* asking the kernel will give us the wrong answer. This
* is an unfortunate side-effect of the way ifconfig is
* structure for modularity (yech).
*
* NB: ifmr is actually setup in getchaninfo (above); we
* assume it's called coincident with to this call so
* we have a ``current setting''; otherwise we must pass
* the socket descriptor down to here so we can make
* the ifmedia_getstate call ourselves.
*/
int chanmode = ifmr != NULL ? IFM_MODE(ifmr->ifm_current) : IFM_AUTO;
/* when ambiguous promote to ``best'' */
/* NB: we abitrarily pick HT40+ over HT40- */
if (chanmode != IFM_IEEE80211_11B)
i = canpromote(i, IEEE80211_CHAN_B, IEEE80211_CHAN_G);
if (chanmode != IFM_IEEE80211_11G && (htconf & 1)) {
i = canpromote(i, IEEE80211_CHAN_G,
IEEE80211_CHAN_G | IEEE80211_CHAN_HT20);
if (htconf & 2) {
i = canpromote(i, IEEE80211_CHAN_G,
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40D);
i = canpromote(i, IEEE80211_CHAN_G,
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40U);
}
}
if (chanmode != IFM_IEEE80211_11A && (htconf & 1)) {
i = canpromote(i, IEEE80211_CHAN_A,
IEEE80211_CHAN_A | IEEE80211_CHAN_HT20);
if (htconf & 2) {
i = canpromote(i, IEEE80211_CHAN_A,
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D);
i = canpromote(i, IEEE80211_CHAN_A,
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U);
}
}
return i;
}
static void
mapfreq(struct ieee80211_channel *chan, int freq, int flags)
{
int i;
for (i = 0; i < chaninfo->ic_nchans; i++) {
const struct ieee80211_channel *c = &chaninfo->ic_chans[i];
if (c->ic_freq == freq && (c->ic_flags & flags) == flags) {
if (flags == 0) {
/* when ambiguous promote to ``best'' */
c = &chaninfo->ic_chans[promote(i)];
}
*chan = *c;
return;
}
}
errx(1, "unknown/undefined frequency %u/0x%x", freq, flags);
}
static void
mapchan(struct ieee80211_channel *chan, int ieee, int flags)
{
int i;
for (i = 0; i < chaninfo->ic_nchans; i++) {
const struct ieee80211_channel *c = &chaninfo->ic_chans[i];
if (c->ic_ieee == ieee && (c->ic_flags & flags) == flags) {
if (flags == 0) {
/* when ambiguous promote to ``best'' */
c = &chaninfo->ic_chans[promote(i)];
}
*chan = *c;
return;
}
}
errx(1, "unknown/undefined channel number %d flags 0x%x", ieee, flags);
}
static const struct ieee80211_channel *
getcurchan(int s)
{
if (gotcurchan)
return &curchan;
if (get80211(s, IEEE80211_IOC_CURCHAN, &curchan, sizeof(curchan)) < 0) {
int val;
/* fall back to legacy ioctl */
if (get80211val(s, IEEE80211_IOC_CHANNEL, &val) < 0)
err(-1, "cannot figure out current channel");
getchaninfo(s);
mapchan(&curchan, val, 0);
}
gotcurchan = 1;
return &curchan;
}
static enum ieee80211_phymode
chan2mode(const struct ieee80211_channel *c)
{
if (IEEE80211_IS_CHAN_HTA(c))
return IEEE80211_MODE_11NA;
if (IEEE80211_IS_CHAN_HTG(c))
return IEEE80211_MODE_11NG;
if (IEEE80211_IS_CHAN_108A(c))
return IEEE80211_MODE_TURBO_A;
if (IEEE80211_IS_CHAN_108G(c))
return IEEE80211_MODE_TURBO_G;
if (IEEE80211_IS_CHAN_ST(c))
return IEEE80211_MODE_STURBO_A;
if (IEEE80211_IS_CHAN_FHSS(c))
return IEEE80211_MODE_FH;
if (IEEE80211_IS_CHAN_HALF(c))
return IEEE80211_MODE_HALF;
if (IEEE80211_IS_CHAN_QUARTER(c))
return IEEE80211_MODE_QUARTER;
if (IEEE80211_IS_CHAN_A(c))
return IEEE80211_MODE_11A;
if (IEEE80211_IS_CHAN_ANYG(c))
return IEEE80211_MODE_11G;
if (IEEE80211_IS_CHAN_B(c))
return IEEE80211_MODE_11B;
return IEEE80211_MODE_AUTO;
}
static void
getroam(int s)
{
if (gotroam)
return;
if (get80211(s, IEEE80211_IOC_ROAM,
&roamparams, sizeof(roamparams)) < 0)
err(1, "unable to get roaming parameters");
gotroam = 1;
}
static void
setroam_cb(int s, void *arg)
{
struct ieee80211_roamparams_req *roam = arg;
set80211(s, IEEE80211_IOC_ROAM, 0, sizeof(*roam), roam);
}
static void
gettxparams(int s)
{
if (gottxparams)
return;
if (get80211(s, IEEE80211_IOC_TXPARAMS,
&txparams, sizeof(txparams)) < 0)
err(1, "unable to get transmit parameters");
gottxparams = 1;
}
static void
settxparams_cb(int s, void *arg)
{
struct ieee80211_txparams_req *txp = arg;
set80211(s, IEEE80211_IOC_TXPARAMS, 0, sizeof(*txp), txp);
}
static void
getregdomain(int s)
{
if (gotregdomain)
return;
if (get80211(s, IEEE80211_IOC_REGDOMAIN,
&regdomain, sizeof(regdomain)) < 0)
err(1, "unable to get regulatory domain info");
gotregdomain = 1;
}
static void
getdevcaps(int s, struct ieee80211_devcaps_req *dc)
{
if (get80211(s, IEEE80211_IOC_DEVCAPS, dc,
IEEE80211_DEVCAPS_SPACE(dc)) < 0)
err(1, "unable to get device capabilities");
}
static void
setregdomain_cb(int s, void *arg)
{
struct ieee80211_regdomain_req *req;
struct ieee80211_regdomain *rd = arg;
struct ieee80211_devcaps_req *dc;
struct regdata *rdp = getregdata();
if (rd->country != NO_COUNTRY) {
const struct country *cc;
/*
* Check current country seting to make sure it's
* compatible with the new regdomain. If not, then
* override it with any default country for this
* SKU. If we cannot arrange a match, then abort.
*/
cc = lib80211_country_findbycc(rdp, rd->country);
if (cc == NULL)
errx(1, "unknown ISO country code %d", rd->country);
if (cc->rd->sku != rd->regdomain) {
const struct regdomain *rp;
/*
* Check if country is incompatible with regdomain.
* To enable multiple regdomains for a country code
* we permit a mismatch between the regdomain and
* the country's associated regdomain when the
* regdomain is setup w/o a default country. For
* example, US is bound to the FCC regdomain but
* we allow US to be combined with FCC3 because FCC3
* has not default country. This allows bogus
* combinations like FCC3+DK which are resolved when
* constructing the channel list by deferring to the
* regdomain to construct the channel list.
*/
rp = lib80211_regdomain_findbysku(rdp, rd->regdomain);
if (rp == NULL)
errx(1, "country %s (%s) is not usable with "
"regdomain %d", cc->isoname, cc->name,
rd->regdomain);
else if (rp->cc != NULL && rp->cc != cc)
errx(1, "country %s (%s) is not usable with "
"regdomain %s", cc->isoname, cc->name,
rp->name);
}
}
/*
* Fetch the device capabilities and calculate the
* full set of netbands for which we request a new
* channel list be constructed. Once that's done we
* push the regdomain info + channel list to the kernel.
*/
dc = malloc(IEEE80211_DEVCAPS_SIZE(MAXCHAN));
if (dc == NULL)
errx(1, "no space for device capabilities");
dc->dc_chaninfo.ic_nchans = MAXCHAN;
getdevcaps(s, dc);
#if 0
if (verbose) {
printf("drivercaps: 0x%x\n", dc->dc_drivercaps);
printf("cryptocaps: 0x%x\n", dc->dc_cryptocaps);
printf("htcaps : 0x%x\n", dc->dc_htcaps);
memcpy(chaninfo, &dc->dc_chaninfo,
IEEE80211_CHANINFO_SPACE(&dc->dc_chaninfo));
print_channels(s, &dc->dc_chaninfo, 1/*allchans*/, 1/*verbose*/);
}
#endif
req = malloc(IEEE80211_REGDOMAIN_SIZE(dc->dc_chaninfo.ic_nchans));
if (req == NULL)
errx(1, "no space for regdomain request");
req->rd = *rd;
regdomain_makechannels(req, dc);
if (verbose) {
LINE_INIT(':');
print_regdomain(rd, 1/*verbose*/);
LINE_BREAK();
/* blech, reallocate channel list for new data */
if (chaninfo != NULL)
free(chaninfo);
chaninfo = malloc(IEEE80211_CHANINFO_SPACE(&req->chaninfo));
if (chaninfo == NULL)
errx(1, "no space for channel list");
memcpy(chaninfo, &req->chaninfo,
IEEE80211_CHANINFO_SPACE(&req->chaninfo));
print_channels(s, &req->chaninfo, 1/*allchans*/, 1/*verbose*/);
}
if (req->chaninfo.ic_nchans == 0)
errx(1, "no channels calculated");
set80211(s, IEEE80211_IOC_REGDOMAIN, 0,
IEEE80211_REGDOMAIN_SPACE(req), req);
free(req);
free(dc);
}
static int
ieee80211_mhz2ieee(int freq, int flags)
{
struct ieee80211_channel chan;
mapfreq(&chan, freq, flags);
return chan.ic_ieee;
}
static int
isanyarg(const char *arg)
{
return (strncmp(arg, "-", 1) == 0 ||
strncasecmp(arg, "any", 3) == 0 || strncasecmp(arg, "off", 3) == 0);
}
static void
set80211ssid(const char *val, int d, int s, const struct afswtch *rafp)
{
int ssid;
int len;
u_int8_t data[IEEE80211_NWID_LEN];
ssid = 0;
len = strlen(val);
if (len > 2 && isdigit((int)val[0]) && val[1] == ':') {
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
ssid = atoi(val)-1;
val += 2;
}
bzero(data, sizeof(data));
len = sizeof(data);
if (get_string(val, NULL, data, &len) == NULL)
exit(1);
set80211(s, IEEE80211_IOC_SSID, ssid, len, data);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void
set80211meshid(const char *val, int d, int s, const struct afswtch *rafp)
{
int len;
u_int8_t data[IEEE80211_NWID_LEN];
memset(data, 0, sizeof(data));
len = sizeof(data);
if (get_string(val, NULL, data, &len) == NULL)
exit(1);
set80211(s, IEEE80211_IOC_MESH_ID, 0, len, data);
}
static void
set80211stationname(const char *val, int d, int s, const struct afswtch *rafp)
{
int len;
u_int8_t data[33];
bzero(data, sizeof(data));
len = sizeof(data);
get_string(val, NULL, data, &len);
set80211(s, IEEE80211_IOC_STATIONNAME, 0, len, data);
}
/*
* Parse a channel specification for attributes/flags.
* The syntax is:
* freq/xx channel width (5,10,20,40,40+,40-)
* freq:mode channel mode (a,b,g,h,n,t,s,d)
*
* These can be combined in either order; e.g. 2437:ng/40.
* Modes are case insensitive.
*
* The result is not validated here; it's assumed to be
* checked against the channel table fetched from the kernel.
*/
static int
getchannelflags(const char *val, int freq)
{
#define _CHAN_HT 0x80000000
const char *cp;
int flags;
flags = 0;
cp = strchr(val, ':');
if (cp != NULL) {
for (cp++; isalpha((int) *cp); cp++) {
/* accept mixed case */
int c = *cp;
if (isupper(c))
c = tolower(c);
switch (c) {
case 'a': /* 802.11a */
flags |= IEEE80211_CHAN_A;
break;
case 'b': /* 802.11b */
flags |= IEEE80211_CHAN_B;
break;
case 'g': /* 802.11g */
flags |= IEEE80211_CHAN_G;
break;
case 'h': /* ht = 802.11n */
case 'n': /* 802.11n */
flags |= _CHAN_HT; /* NB: private */
break;
case 'd': /* dt = Atheros Dynamic Turbo */
flags |= IEEE80211_CHAN_TURBO;
break;
case 't': /* ht, dt, st, t */
/* dt and unadorned t specify Dynamic Turbo */
if ((flags & (IEEE80211_CHAN_STURBO|_CHAN_HT)) == 0)
flags |= IEEE80211_CHAN_TURBO;
break;
case 's': /* st = Atheros Static Turbo */
flags |= IEEE80211_CHAN_STURBO;
break;
default:
errx(-1, "%s: Invalid channel attribute %c\n",
val, *cp);
}
}
}
cp = strchr(val, '/');
if (cp != NULL) {
char *ep;
u_long cw = strtoul(cp+1, &ep, 10);
switch (cw) {
case 5:
flags |= IEEE80211_CHAN_QUARTER;
break;
case 10:
flags |= IEEE80211_CHAN_HALF;
break;
case 20:
/* NB: this may be removed below */
flags |= IEEE80211_CHAN_HT20;
break;
case 40:
if (ep != NULL && *ep == '+')
flags |= IEEE80211_CHAN_HT40U;
else if (ep != NULL && *ep == '-')
flags |= IEEE80211_CHAN_HT40D;
break;
default:
errx(-1, "%s: Invalid channel width\n", val);
}
}
/*
* Cleanup specifications.
*/
if ((flags & _CHAN_HT) == 0) {
/*
* If user specified freq/20 or freq/40 quietly remove
* HT cw attributes depending on channel use. To give
* an explicit 20/40 width for an HT channel you must
* indicate it is an HT channel since all HT channels
* are also usable for legacy operation; e.g. freq:n/40.
*/
flags &= ~IEEE80211_CHAN_HT;
} else {
/*
* Remove private indicator that this is an HT channel
* and if no explicit channel width has been given
* provide the default settings.
*/
flags &= ~_CHAN_HT;
if ((flags & IEEE80211_CHAN_HT) == 0) {
struct ieee80211_channel chan;
/*
* Consult the channel list to see if we can use
* HT40+ or HT40- (if both the map routines choose).
*/
if (freq > 255)
mapfreq(&chan, freq, 0);
else
mapchan(&chan, freq, 0);
flags |= (chan.ic_flags & IEEE80211_CHAN_HT);
}
}
return flags;
#undef _CHAN_HT
}
static void
getchannel(int s, struct ieee80211_channel *chan, const char *val)
{
int v, flags;
char *eptr;
memset(chan, 0, sizeof(*chan));
if (isanyarg(val)) {
chan->ic_freq = IEEE80211_CHAN_ANY;
return;
}
getchaninfo(s);
errno = 0;
v = strtol(val, &eptr, 10);
if (val[0] == '\0' || val == eptr || errno == ERANGE ||
/* channel may be suffixed with nothing, :flag, or /width */
(eptr[0] != '\0' && eptr[0] != ':' && eptr[0] != '/'))
errx(1, "invalid channel specification%s",
errno == ERANGE ? " (out of range)" : "");
flags = getchannelflags(val, v);
if (v > 255) { /* treat as frequency */
mapfreq(chan, v, flags);
} else {
mapchan(chan, v, flags);
}
}
static void
set80211channel(const char *val, int d, int s, const struct afswtch *rafp)
{
struct ieee80211_channel chan;
getchannel(s, &chan, val);
set80211(s, IEEE80211_IOC_CURCHAN, 0, sizeof(chan), &chan);
}
static void
set80211chanswitch(const char *val, int d, int s, const struct afswtch *rafp)
{
struct ieee80211_chanswitch_req csr;
getchannel(s, &csr.csa_chan, val);
csr.csa_mode = 1;
csr.csa_count = 5;
set80211(s, IEEE80211_IOC_CHANSWITCH, 0, sizeof(csr), &csr);
}
static void
set80211authmode(const char *val, int d, int s, const struct afswtch *rafp)
{
int mode;
if (strcasecmp(val, "none") == 0) {
mode = IEEE80211_AUTH_NONE;
} else if (strcasecmp(val, "open") == 0) {
mode = IEEE80211_AUTH_OPEN;
} else if (strcasecmp(val, "shared") == 0) {
mode = IEEE80211_AUTH_SHARED;
} else if (strcasecmp(val, "8021x") == 0) {
mode = IEEE80211_AUTH_8021X;
} else if (strcasecmp(val, "wpa") == 0) {
mode = IEEE80211_AUTH_WPA;
} else {
2005-09-29 13:09:04 +00:00
errx(1, "unknown authmode");
}
set80211(s, IEEE80211_IOC_AUTHMODE, mode, 0, NULL);
}
static void
set80211powersavemode(const char *val, int d, int s, const struct afswtch *rafp)
{
int mode;
if (strcasecmp(val, "off") == 0) {
mode = IEEE80211_POWERSAVE_OFF;
} else if (strcasecmp(val, "on") == 0) {
mode = IEEE80211_POWERSAVE_ON;
} else if (strcasecmp(val, "cam") == 0) {
mode = IEEE80211_POWERSAVE_CAM;
} else if (strcasecmp(val, "psp") == 0) {
mode = IEEE80211_POWERSAVE_PSP;
} else if (strcasecmp(val, "psp-cam") == 0) {
mode = IEEE80211_POWERSAVE_PSP_CAM;
} else {
2005-09-29 13:09:04 +00:00
errx(1, "unknown powersavemode");
}
set80211(s, IEEE80211_IOC_POWERSAVE, mode, 0, NULL);
}
static void
set80211powersave(const char *val, int d, int s, const struct afswtch *rafp)
{
if (d == 0)
set80211(s, IEEE80211_IOC_POWERSAVE, IEEE80211_POWERSAVE_OFF,
0, NULL);
else
set80211(s, IEEE80211_IOC_POWERSAVE, IEEE80211_POWERSAVE_ON,
0, NULL);
}
static void
set80211powersavesleep(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_POWERSAVESLEEP, atoi(val), 0, NULL);
}
static void
set80211wepmode(const char *val, int d, int s, const struct afswtch *rafp)
{
int mode;
if (strcasecmp(val, "off") == 0) {
mode = IEEE80211_WEP_OFF;
} else if (strcasecmp(val, "on") == 0) {
mode = IEEE80211_WEP_ON;
} else if (strcasecmp(val, "mixed") == 0) {
mode = IEEE80211_WEP_MIXED;
} else {
2005-09-29 13:09:04 +00:00
errx(1, "unknown wep mode");
}
set80211(s, IEEE80211_IOC_WEP, mode, 0, NULL);
}
static void
set80211wep(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_WEP, d, 0, NULL);
}
static int
isundefarg(const char *arg)
{
return (strcmp(arg, "-") == 0 || strncasecmp(arg, "undef", 5) == 0);
}
static void
set80211weptxkey(const char *val, int d, int s, const struct afswtch *rafp)
{
if (isundefarg(val))
set80211(s, IEEE80211_IOC_WEPTXKEY, IEEE80211_KEYIX_NONE, 0, NULL);
else
set80211(s, IEEE80211_IOC_WEPTXKEY, atoi(val)-1, 0, NULL);
}
static void
set80211wepkey(const char *val, int d, int s, const struct afswtch *rafp)
{
int key = 0;
int len;
u_int8_t data[IEEE80211_KEYBUF_SIZE];
if (isdigit((int)val[0]) && val[1] == ':') {
key = atoi(val)-1;
val += 2;
}
bzero(data, sizeof(data));
len = sizeof(data);
get_string(val, NULL, data, &len);
set80211(s, IEEE80211_IOC_WEPKEY, key, len, data);
}
/*
2012-01-07 16:09:33 +00:00
* This function is purely a NetBSD compatibility interface. The NetBSD
2005-08-03 20:57:33 +00:00
* interface is too inflexible, but it's there so we'll support it since
* it's not all that hard.
*/
static void
set80211nwkey(const char *val, int d, int s, const struct afswtch *rafp)
{
int txkey;
int i, len;
u_int8_t data[IEEE80211_KEYBUF_SIZE];
set80211(s, IEEE80211_IOC_WEP, IEEE80211_WEP_ON, 0, NULL);
if (isdigit((int)val[0]) && val[1] == ':') {
txkey = val[0]-'0'-1;
val += 2;
for (i = 0; i < 4; i++) {
bzero(data, sizeof(data));
len = sizeof(data);
val = get_string(val, ",", data, &len);
if (val == NULL)
exit(1);
set80211(s, IEEE80211_IOC_WEPKEY, i, len, data);
}
} else {
bzero(data, sizeof(data));
len = sizeof(data);
get_string(val, NULL, data, &len);
txkey = 0;
set80211(s, IEEE80211_IOC_WEPKEY, 0, len, data);
bzero(data, sizeof(data));
for (i = 1; i < 4; i++)
set80211(s, IEEE80211_IOC_WEPKEY, i, 0, data);
}
set80211(s, IEEE80211_IOC_WEPTXKEY, txkey, 0, NULL);
}
static void
set80211rtsthreshold(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_RTSTHRESHOLD,
isundefarg(val) ? IEEE80211_RTS_MAX : atoi(val), 0, NULL);
}
static void
set80211protmode(const char *val, int d, int s, const struct afswtch *rafp)
{
int mode;
if (strcasecmp(val, "off") == 0) {
mode = IEEE80211_PROTMODE_OFF;
} else if (strcasecmp(val, "cts") == 0) {
mode = IEEE80211_PROTMODE_CTS;
} else if (strncasecmp(val, "rtscts", 3) == 0) {
mode = IEEE80211_PROTMODE_RTSCTS;
} else {
2005-09-29 13:09:04 +00:00
errx(1, "unknown protection mode");
}
set80211(s, IEEE80211_IOC_PROTMODE, mode, 0, NULL);
}
static void
set80211htprotmode(const char *val, int d, int s, const struct afswtch *rafp)
{
int mode;
if (strcasecmp(val, "off") == 0) {
mode = IEEE80211_PROTMODE_OFF;
} else if (strncasecmp(val, "rts", 3) == 0) {
mode = IEEE80211_PROTMODE_RTSCTS;
} else {
errx(1, "unknown protection mode");
}
set80211(s, IEEE80211_IOC_HTPROTMODE, mode, 0, NULL);
}
static void
set80211txpower(const char *val, int d, int s, const struct afswtch *rafp)
{
double v = atof(val);
int txpow;
txpow = (int) (2*v);
if (txpow != 2*v)
errx(-1, "invalid tx power (must be .5 dBm units)");
set80211(s, IEEE80211_IOC_TXPOWER, txpow, 0, NULL);
}
#define IEEE80211_ROAMING_DEVICE 0
#define IEEE80211_ROAMING_AUTO 1
#define IEEE80211_ROAMING_MANUAL 2
static void
set80211roaming(const char *val, int d, int s, const struct afswtch *rafp)
{
int mode;
if (strcasecmp(val, "device") == 0) {
mode = IEEE80211_ROAMING_DEVICE;
} else if (strcasecmp(val, "auto") == 0) {
mode = IEEE80211_ROAMING_AUTO;
} else if (strcasecmp(val, "manual") == 0) {
mode = IEEE80211_ROAMING_MANUAL;
} else {
2005-09-29 13:09:04 +00:00
errx(1, "unknown roaming mode");
}
set80211(s, IEEE80211_IOC_ROAMING, mode, 0, NULL);
}
static void
set80211wme(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_WME, d, 0, NULL);
}
static void
set80211hidessid(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_HIDESSID, d, 0, NULL);
}
static void
set80211apbridge(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_APBRIDGE, d, 0, NULL);
}
static void
set80211fastframes(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_FF, d, 0, NULL);
}
static void
set80211dturbo(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_TURBOP, d, 0, NULL);
}
static void
set80211chanlist(const char *val, int d, int s, const struct afswtch *rafp)
{
struct ieee80211req_chanlist chanlist;
char *temp, *cp, *tp;
temp = malloc(strlen(val) + 1);
if (temp == NULL)
errx(1, "malloc failed");
strcpy(temp, val);
memset(&chanlist, 0, sizeof(chanlist));
cp = temp;
for (;;) {
int first, last, f, c;
tp = strchr(cp, ',');
if (tp != NULL)
*tp++ = '\0';
switch (sscanf(cp, "%u-%u", &first, &last)) {
case 1:
if (first > IEEE80211_CHAN_MAX)
errx(-1, "channel %u out of range, max %u",
first, IEEE80211_CHAN_MAX);
setbit(chanlist.ic_channels, first);
break;
case 2:
if (first > IEEE80211_CHAN_MAX)
errx(-1, "channel %u out of range, max %u",
first, IEEE80211_CHAN_MAX);
if (last > IEEE80211_CHAN_MAX)
errx(-1, "channel %u out of range, max %u",
last, IEEE80211_CHAN_MAX);
if (first > last)
errx(-1, "void channel range, %u > %u",
first, last);
for (f = first; f <= last; f++)
setbit(chanlist.ic_channels, f);
break;
}
if (tp == NULL)
break;
c = *tp;
while (isspace(c))
tp++;
if (!isdigit(c))
break;
cp = tp;
}
set80211(s, IEEE80211_IOC_CHANLIST, 0, sizeof(chanlist), &chanlist);
}
static void
set80211bssid(const char *val, int d, int s, const struct afswtch *rafp)
{
if (!isanyarg(val)) {
char *temp;
struct sockaddr_dl sdl;
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
if (temp == NULL)
errx(1, "malloc failed");
temp[0] = ':';
strcpy(temp + 1, val);
sdl.sdl_len = sizeof(sdl);
link_addr(temp, &sdl);
free(temp);
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
errx(1, "malformed link-level address");
set80211(s, IEEE80211_IOC_BSSID, 0,
IEEE80211_ADDR_LEN, LLADDR(&sdl));
} else {
uint8_t zerobssid[IEEE80211_ADDR_LEN];
memset(zerobssid, 0, sizeof(zerobssid));
set80211(s, IEEE80211_IOC_BSSID, 0,
IEEE80211_ADDR_LEN, zerobssid);
}
}
static int
getac(const char *ac)
{
if (strcasecmp(ac, "ac_be") == 0 || strcasecmp(ac, "be") == 0)
return WME_AC_BE;
if (strcasecmp(ac, "ac_bk") == 0 || strcasecmp(ac, "bk") == 0)
return WME_AC_BK;
if (strcasecmp(ac, "ac_vi") == 0 || strcasecmp(ac, "vi") == 0)
return WME_AC_VI;
if (strcasecmp(ac, "ac_vo") == 0 || strcasecmp(ac, "vo") == 0)
return WME_AC_VO;
errx(1, "unknown wme access class %s", ac);
}
static
DECL_CMD_FUNC2(set80211cwmin, ac, val)
{
set80211(s, IEEE80211_IOC_WME_CWMIN, atoi(val), getac(ac), NULL);
}
static
DECL_CMD_FUNC2(set80211cwmax, ac, val)
{
set80211(s, IEEE80211_IOC_WME_CWMAX, atoi(val), getac(ac), NULL);
}
static
DECL_CMD_FUNC2(set80211aifs, ac, val)
{
set80211(s, IEEE80211_IOC_WME_AIFS, atoi(val), getac(ac), NULL);
}
static
DECL_CMD_FUNC2(set80211txoplimit, ac, val)
{
set80211(s, IEEE80211_IOC_WME_TXOPLIMIT, atoi(val), getac(ac), NULL);
}
static
DECL_CMD_FUNC(set80211acm, ac, d)
{
set80211(s, IEEE80211_IOC_WME_ACM, 1, getac(ac), NULL);
}
static
DECL_CMD_FUNC(set80211noacm, ac, d)
{
set80211(s, IEEE80211_IOC_WME_ACM, 0, getac(ac), NULL);
}
static
DECL_CMD_FUNC(set80211ackpolicy, ac, d)
{
set80211(s, IEEE80211_IOC_WME_ACKPOLICY, 1, getac(ac), NULL);
}
static
DECL_CMD_FUNC(set80211noackpolicy, ac, d)
{
set80211(s, IEEE80211_IOC_WME_ACKPOLICY, 0, getac(ac), NULL);
}
static
DECL_CMD_FUNC2(set80211bsscwmin, ac, val)
{
set80211(s, IEEE80211_IOC_WME_CWMIN, atoi(val),
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
}
static
DECL_CMD_FUNC2(set80211bsscwmax, ac, val)
{
set80211(s, IEEE80211_IOC_WME_CWMAX, atoi(val),
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
}
static
DECL_CMD_FUNC2(set80211bssaifs, ac, val)
{
set80211(s, IEEE80211_IOC_WME_AIFS, atoi(val),
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
}
static
DECL_CMD_FUNC2(set80211bsstxoplimit, ac, val)
{
set80211(s, IEEE80211_IOC_WME_TXOPLIMIT, atoi(val),
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
}
static
DECL_CMD_FUNC(set80211dtimperiod, val, d)
{
set80211(s, IEEE80211_IOC_DTIM_PERIOD, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211bintval, val, d)
{
set80211(s, IEEE80211_IOC_BEACON_INTERVAL, atoi(val), 0, NULL);
}
static void
set80211macmac(int s, int op, const char *val)
{
char *temp;
struct sockaddr_dl sdl;
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
if (temp == NULL)
errx(1, "malloc failed");
temp[0] = ':';
strcpy(temp + 1, val);
sdl.sdl_len = sizeof(sdl);
link_addr(temp, &sdl);
free(temp);
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
errx(1, "malformed link-level address");
set80211(s, op, 0, IEEE80211_ADDR_LEN, LLADDR(&sdl));
}
static
DECL_CMD_FUNC(set80211addmac, val, d)
{
set80211macmac(s, IEEE80211_IOC_ADDMAC, val);
}
static
DECL_CMD_FUNC(set80211delmac, val, d)
{
set80211macmac(s, IEEE80211_IOC_DELMAC, val);
}
static
DECL_CMD_FUNC(set80211kickmac, val, d)
{
char *temp;
struct sockaddr_dl sdl;
struct ieee80211req_mlme mlme;
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
if (temp == NULL)
errx(1, "malloc failed");
temp[0] = ':';
strcpy(temp + 1, val);
sdl.sdl_len = sizeof(sdl);
link_addr(temp, &sdl);
free(temp);
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
errx(1, "malformed link-level address");
memset(&mlme, 0, sizeof(mlme));
mlme.im_op = IEEE80211_MLME_DEAUTH;
mlme.im_reason = IEEE80211_REASON_AUTH_EXPIRE;
memcpy(mlme.im_macaddr, LLADDR(&sdl), IEEE80211_ADDR_LEN);
set80211(s, IEEE80211_IOC_MLME, 0, sizeof(mlme), &mlme);
}
static
DECL_CMD_FUNC(set80211maccmd, val, d)
{
set80211(s, IEEE80211_IOC_MACCMD, d, 0, NULL);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void
set80211meshrtmac(int s, int req, const char *val)
{
char *temp;
struct sockaddr_dl sdl;
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
if (temp == NULL)
errx(1, "malloc failed");
temp[0] = ':';
strcpy(temp + 1, val);
sdl.sdl_len = sizeof(sdl);
link_addr(temp, &sdl);
free(temp);
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
errx(1, "malformed link-level address");
set80211(s, IEEE80211_IOC_MESH_RTCMD, req,
IEEE80211_ADDR_LEN, LLADDR(&sdl));
}
static
DECL_CMD_FUNC(set80211addmeshrt, val, d)
{
set80211meshrtmac(s, IEEE80211_MESH_RTCMD_ADD, val);
}
static
DECL_CMD_FUNC(set80211delmeshrt, val, d)
{
set80211meshrtmac(s, IEEE80211_MESH_RTCMD_DELETE, val);
}
static
DECL_CMD_FUNC(set80211meshrtcmd, val, d)
{
set80211(s, IEEE80211_IOC_MESH_RTCMD, d, 0, NULL);
}
static
DECL_CMD_FUNC(set80211hwmprootmode, val, d)
{
int mode;
if (strcasecmp(val, "normal") == 0)
mode = IEEE80211_HWMP_ROOTMODE_NORMAL;
else if (strcasecmp(val, "proactive") == 0)
mode = IEEE80211_HWMP_ROOTMODE_PROACTIVE;
else if (strcasecmp(val, "rann") == 0)
mode = IEEE80211_HWMP_ROOTMODE_RANN;
else
mode = IEEE80211_HWMP_ROOTMODE_DISABLED;
set80211(s, IEEE80211_IOC_HWMP_ROOTMODE, mode, 0, NULL);
}
static
DECL_CMD_FUNC(set80211hwmpmaxhops, val, d)
{
set80211(s, IEEE80211_IOC_HWMP_MAXHOPS, atoi(val), 0, NULL);
}
static void
set80211pureg(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_PUREG, d, 0, NULL);
}
static void
set80211quiet(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_QUIET, d, 0, NULL);
}
static
DECL_CMD_FUNC(set80211quietperiod, val, d)
{
set80211(s, IEEE80211_IOC_QUIET_PERIOD, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211quietcount, val, d)
{
set80211(s, IEEE80211_IOC_QUIET_COUNT, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211quietduration, val, d)
{
set80211(s, IEEE80211_IOC_QUIET_DUR, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211quietoffset, val, d)
{
set80211(s, IEEE80211_IOC_QUIET_OFFSET, atoi(val), 0, NULL);
}
2005-12-14 19:44:39 +00:00
static void
set80211bgscan(const char *val, int d, int s, const struct afswtch *rafp)
2005-12-14 19:44:39 +00:00
{
set80211(s, IEEE80211_IOC_BGSCAN, d, 0, NULL);
}
static
DECL_CMD_FUNC(set80211bgscanidle, val, d)
{
set80211(s, IEEE80211_IOC_BGSCAN_IDLE, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211bgscanintvl, val, d)
{
set80211(s, IEEE80211_IOC_BGSCAN_INTERVAL, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211scanvalid, val, d)
{
set80211(s, IEEE80211_IOC_SCANVALID, atoi(val), 0, NULL);
}
/*
* Parse an optional trailing specification of which netbands
* to apply a parameter to. This is basically the same syntax
* as used for channels but you can concatenate to specify
* multiple. For example:
* 14:abg apply to 11a, 11b, and 11g
* 6:ht apply to 11na and 11ng
* We don't make a big effort to catch silly things; this is
* really a convenience mechanism.
*/
static int
getmodeflags(const char *val)
{
const char *cp;
int flags;
flags = 0;
cp = strchr(val, ':');
if (cp != NULL) {
for (cp++; isalpha((int) *cp); cp++) {
/* accept mixed case */
int c = *cp;
if (isupper(c))
c = tolower(c);
switch (c) {
case 'a': /* 802.11a */
flags |= IEEE80211_CHAN_A;
break;
case 'b': /* 802.11b */
flags |= IEEE80211_CHAN_B;
break;
case 'g': /* 802.11g */
flags |= IEEE80211_CHAN_G;
break;
case 'n': /* 802.11n */
flags |= IEEE80211_CHAN_HT;
break;
case 'd': /* dt = Atheros Dynamic Turbo */
flags |= IEEE80211_CHAN_TURBO;
break;
case 't': /* ht, dt, st, t */
/* dt and unadorned t specify Dynamic Turbo */
if ((flags & (IEEE80211_CHAN_STURBO|IEEE80211_CHAN_HT)) == 0)
flags |= IEEE80211_CHAN_TURBO;
break;
case 's': /* st = Atheros Static Turbo */
flags |= IEEE80211_CHAN_STURBO;
break;
case 'h': /* 1/2-width channels */
flags |= IEEE80211_CHAN_HALF;
break;
case 'q': /* 1/4-width channels */
flags |= IEEE80211_CHAN_QUARTER;
break;
default:
errx(-1, "%s: Invalid mode attribute %c\n",
val, *cp);
}
}
}
return flags;
}
#define IEEE80211_CHAN_HTA (IEEE80211_CHAN_HT|IEEE80211_CHAN_5GHZ)
#define IEEE80211_CHAN_HTG (IEEE80211_CHAN_HT|IEEE80211_CHAN_2GHZ)
#define _APPLY(_flags, _base, _param, _v) do { \
if (_flags & IEEE80211_CHAN_HT) { \
if ((_flags & (IEEE80211_CHAN_5GHZ|IEEE80211_CHAN_2GHZ)) == 0) {\
_base.params[IEEE80211_MODE_11NA]._param = _v; \
_base.params[IEEE80211_MODE_11NG]._param = _v; \
} else if (_flags & IEEE80211_CHAN_5GHZ) \
_base.params[IEEE80211_MODE_11NA]._param = _v; \
else \
_base.params[IEEE80211_MODE_11NG]._param = _v; \
} \
if (_flags & IEEE80211_CHAN_TURBO) { \
if ((_flags & (IEEE80211_CHAN_5GHZ|IEEE80211_CHAN_2GHZ)) == 0) {\
_base.params[IEEE80211_MODE_TURBO_A]._param = _v; \
_base.params[IEEE80211_MODE_TURBO_G]._param = _v; \
} else if (_flags & IEEE80211_CHAN_5GHZ) \
_base.params[IEEE80211_MODE_TURBO_A]._param = _v; \
else \
_base.params[IEEE80211_MODE_TURBO_G]._param = _v; \
} \
if (_flags & IEEE80211_CHAN_STURBO) \
_base.params[IEEE80211_MODE_STURBO_A]._param = _v; \
if ((_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) \
_base.params[IEEE80211_MODE_11A]._param = _v; \
if ((_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) \
_base.params[IEEE80211_MODE_11G]._param = _v; \
if ((_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) \
_base.params[IEEE80211_MODE_11B]._param = _v; \
if (_flags & IEEE80211_CHAN_HALF) \
_base.params[IEEE80211_MODE_HALF]._param = _v; \
if (_flags & IEEE80211_CHAN_QUARTER) \
_base.params[IEEE80211_MODE_QUARTER]._param = _v; \
} while (0)
#define _APPLY1(_flags, _base, _param, _v) do { \
if (_flags & IEEE80211_CHAN_HT) { \
if (_flags & IEEE80211_CHAN_5GHZ) \
_base.params[IEEE80211_MODE_11NA]._param = _v; \
else \
_base.params[IEEE80211_MODE_11NG]._param = _v; \
} else if ((_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) \
_base.params[IEEE80211_MODE_TURBO_A]._param = _v; \
else if ((_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) \
_base.params[IEEE80211_MODE_TURBO_G]._param = _v; \
else if ((_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) \
_base.params[IEEE80211_MODE_STURBO_A]._param = _v; \
else if (_flags & IEEE80211_CHAN_HALF) \
_base.params[IEEE80211_MODE_HALF]._param = _v; \
else if (_flags & IEEE80211_CHAN_QUARTER) \
_base.params[IEEE80211_MODE_QUARTER]._param = _v; \
else if ((_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) \
_base.params[IEEE80211_MODE_11A]._param = _v; \
else if ((_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) \
_base.params[IEEE80211_MODE_11G]._param = _v; \
else if ((_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) \
_base.params[IEEE80211_MODE_11B]._param = _v; \
} while (0)
#define _APPLY_RATE(_flags, _base, _param, _v) do { \
if (_flags & IEEE80211_CHAN_HT) { \
(_v) = (_v / 2) | IEEE80211_RATE_MCS; \
} \
_APPLY(_flags, _base, _param, _v); \
} while (0)
#define _APPLY_RATE1(_flags, _base, _param, _v) do { \
if (_flags & IEEE80211_CHAN_HT) { \
(_v) = (_v / 2) | IEEE80211_RATE_MCS; \
} \
_APPLY1(_flags, _base, _param, _v); \
} while (0)
static
DECL_CMD_FUNC(set80211roamrssi, val, d)
{
double v = atof(val);
int rssi, flags;
rssi = (int) (2*v);
if (rssi != 2*v)
errx(-1, "invalid rssi (must be .5 dBm units)");
flags = getmodeflags(val);
getroam(s);
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY1(flags, roamparams, rssi, rssi);
} else
_APPLY(flags, roamparams, rssi, rssi);
callback_register(setroam_cb, &roamparams);
}
static int
getrate(const char *val, const char *tag)
{
double v = atof(val);
int rate;
rate = (int) (2*v);
if (rate != 2*v)
errx(-1, "invalid %s rate (must be .5 Mb/s units)", tag);
return rate; /* NB: returns 2x the specified value */
}
static
DECL_CMD_FUNC(set80211roamrate, val, d)
{
int rate, flags;
rate = getrate(val, "roam");
flags = getmodeflags(val);
getroam(s);
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY_RATE1(flags, roamparams, rate, rate);
} else
_APPLY_RATE(flags, roamparams, rate, rate);
callback_register(setroam_cb, &roamparams);
}
static
DECL_CMD_FUNC(set80211mcastrate, val, d)
{
int rate, flags;
rate = getrate(val, "mcast");
flags = getmodeflags(val);
gettxparams(s);
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY_RATE1(flags, txparams, mcastrate, rate);
} else
_APPLY_RATE(flags, txparams, mcastrate, rate);
callback_register(settxparams_cb, &txparams);
}
static
DECL_CMD_FUNC(set80211mgtrate, val, d)
{
int rate, flags;
rate = getrate(val, "mgmt");
flags = getmodeflags(val);
gettxparams(s);
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY_RATE1(flags, txparams, mgmtrate, rate);
} else
_APPLY_RATE(flags, txparams, mgmtrate, rate);
callback_register(settxparams_cb, &txparams);
}
static
DECL_CMD_FUNC(set80211ucastrate, val, d)
{
int flags;
gettxparams(s);
flags = getmodeflags(val);
if (isanyarg(val)) {
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY1(flags, txparams, ucastrate,
IEEE80211_FIXED_RATE_NONE);
} else
_APPLY(flags, txparams, ucastrate,
IEEE80211_FIXED_RATE_NONE);
} else {
int rate = getrate(val, "ucast");
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY_RATE1(flags, txparams, ucastrate, rate);
} else
_APPLY_RATE(flags, txparams, ucastrate, rate);
}
callback_register(settxparams_cb, &txparams);
2005-12-14 19:44:39 +00:00
}
static
DECL_CMD_FUNC(set80211maxretry, val, d)
{
int v = atoi(val), flags;
flags = getmodeflags(val);
gettxparams(s);
if (flags == 0) { /* NB: no flags => current channel */
flags = getcurchan(s)->ic_flags;
_APPLY1(flags, txparams, maxretry, v);
} else
_APPLY(flags, txparams, maxretry, v);
callback_register(settxparams_cb, &txparams);
}
#undef _APPLY_RATE
#undef _APPLY
#undef IEEE80211_CHAN_HTA
#undef IEEE80211_CHAN_HTG
static
DECL_CMD_FUNC(set80211fragthreshold, val, d)
{
set80211(s, IEEE80211_IOC_FRAGTHRESHOLD,
isundefarg(val) ? IEEE80211_FRAG_MAX : atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211bmissthreshold, val, d)
{
set80211(s, IEEE80211_IOC_BMISSTHRESHOLD,
isundefarg(val) ? IEEE80211_HWBMISS_MAX : atoi(val), 0, NULL);
}
static void
set80211burst(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_BURST, d, 0, NULL);
}
static void
set80211doth(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_DOTH, d, 0, NULL);
}
static void
set80211dfs(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_DFS, d, 0, NULL);
}
static void
set80211shortgi(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_SHORTGI,
d ? (IEEE80211_HTCAP_SHORTGI20 | IEEE80211_HTCAP_SHORTGI40) : 0,
0, NULL);
}
static void
set80211ampdu(const char *val, int d, int s, const struct afswtch *rafp)
{
int ampdu;
if (get80211val(s, IEEE80211_IOC_AMPDU, &ampdu) < 0)
errx(-1, "cannot get AMPDU setting");
if (d < 0) {
d = -d;
ampdu &= ~d;
} else
ampdu |= d;
set80211(s, IEEE80211_IOC_AMPDU, ampdu, 0, NULL);
}
static
DECL_CMD_FUNC(set80211ampdulimit, val, d)
{
int v;
switch (atoi(val)) {
case 8:
case 8*1024:
v = IEEE80211_HTCAP_MAXRXAMPDU_8K;
break;
case 16:
case 16*1024:
v = IEEE80211_HTCAP_MAXRXAMPDU_16K;
break;
case 32:
case 32*1024:
v = IEEE80211_HTCAP_MAXRXAMPDU_32K;
break;
case 64:
case 64*1024:
v = IEEE80211_HTCAP_MAXRXAMPDU_64K;
break;
default:
errx(-1, "invalid A-MPDU limit %s", val);
}
set80211(s, IEEE80211_IOC_AMPDU_LIMIT, v, 0, NULL);
}
static
DECL_CMD_FUNC(set80211ampdudensity, val, d)
{
int v;
if (isanyarg(val) || strcasecmp(val, "na") == 0)
v = IEEE80211_HTCAP_MPDUDENSITY_NA;
else switch ((int)(atof(val)*4)) {
case 0:
v = IEEE80211_HTCAP_MPDUDENSITY_NA;
break;
case 1:
v = IEEE80211_HTCAP_MPDUDENSITY_025;
break;
case 2:
v = IEEE80211_HTCAP_MPDUDENSITY_05;
break;
case 4:
v = IEEE80211_HTCAP_MPDUDENSITY_1;
break;
case 8:
v = IEEE80211_HTCAP_MPDUDENSITY_2;
break;
case 16:
v = IEEE80211_HTCAP_MPDUDENSITY_4;
break;
case 32:
v = IEEE80211_HTCAP_MPDUDENSITY_8;
break;
case 64:
v = IEEE80211_HTCAP_MPDUDENSITY_16;
break;
default:
errx(-1, "invalid A-MPDU density %s", val);
}
set80211(s, IEEE80211_IOC_AMPDU_DENSITY, v, 0, NULL);
}
static void
set80211amsdu(const char *val, int d, int s, const struct afswtch *rafp)
{
int amsdu;
if (get80211val(s, IEEE80211_IOC_AMSDU, &amsdu) < 0)
err(-1, "cannot get AMSDU setting");
if (d < 0) {
d = -d;
amsdu &= ~d;
} else
amsdu |= d;
set80211(s, IEEE80211_IOC_AMSDU, amsdu, 0, NULL);
}
static
DECL_CMD_FUNC(set80211amsdulimit, val, d)
{
set80211(s, IEEE80211_IOC_AMSDU_LIMIT, atoi(val), 0, NULL);
}
static void
set80211puren(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_PUREN, d, 0, NULL);
}
static void
set80211htcompat(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_HTCOMPAT, d, 0, NULL);
}
static void
set80211htconf(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_HTCONF, d, 0, NULL);
htconf = d;
}
static void
set80211dwds(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_DWDS, d, 0, NULL);
}
static void
set80211inact(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_INACTIVITY, d, 0, NULL);
}
static void
set80211tsn(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_TSN, d, 0, NULL);
}
static void
set80211dotd(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_DOTD, d, 0, NULL);
}
static void
set80211smps(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_SMPS, d, 0, NULL);
}
static void
set80211rifs(const char *val, int d, int s, const struct afswtch *rafp)
{
set80211(s, IEEE80211_IOC_RIFS, d, 0, NULL);
}
static
DECL_CMD_FUNC(set80211tdmaslot, val, d)
{
set80211(s, IEEE80211_IOC_TDMA_SLOT, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211tdmaslotcnt, val, d)
{
set80211(s, IEEE80211_IOC_TDMA_SLOTCNT, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211tdmaslotlen, val, d)
{
set80211(s, IEEE80211_IOC_TDMA_SLOTLEN, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211tdmabintval, val, d)
{
set80211(s, IEEE80211_IOC_TDMA_BINTERVAL, atoi(val), 0, NULL);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static
DECL_CMD_FUNC(set80211meshttl, val, d)
{
set80211(s, IEEE80211_IOC_MESH_TTL, atoi(val), 0, NULL);
}
static
DECL_CMD_FUNC(set80211meshforward, val, d)
{
set80211(s, IEEE80211_IOC_MESH_FWRD, d, 0, NULL);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
static
DECL_CMD_FUNC(set80211meshgate, val, d)
{
set80211(s, IEEE80211_IOC_MESH_GATE, d, 0, NULL);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static
DECL_CMD_FUNC(set80211meshpeering, val, d)
{
set80211(s, IEEE80211_IOC_MESH_AP, d, 0, NULL);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
static
DECL_CMD_FUNC(set80211meshmetric, val, d)
{
char v[12];
memcpy(v, val, sizeof(v));
set80211(s, IEEE80211_IOC_MESH_PR_METRIC, 0, 0, v);
}
static
DECL_CMD_FUNC(set80211meshpath, val, d)
{
char v[12];
memcpy(v, val, sizeof(v));
set80211(s, IEEE80211_IOC_MESH_PR_PATH, 0, 0, v);
}
static int
regdomain_sort(const void *a, const void *b)
{
#define CHAN_ALL \
(IEEE80211_CHAN_ALLTURBO|IEEE80211_CHAN_HALF|IEEE80211_CHAN_QUARTER)
const struct ieee80211_channel *ca = a;
const struct ieee80211_channel *cb = b;
return ca->ic_freq == cb->ic_freq ?
(ca->ic_flags & CHAN_ALL) - (cb->ic_flags & CHAN_ALL) :
ca->ic_freq - cb->ic_freq;
#undef CHAN_ALL
}
static const struct ieee80211_channel *
chanlookup(const struct ieee80211_channel chans[], int nchans,
int freq, int flags)
{
int i;
flags &= IEEE80211_CHAN_ALLTURBO;
for (i = 0; i < nchans; i++) {
const struct ieee80211_channel *c = &chans[i];
if (c->ic_freq == freq &&
(c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags)
return c;
}
return NULL;
}
static int
chanfind(const struct ieee80211_channel chans[], int nchans, int flags)
{
int i;
for (i = 0; i < nchans; i++) {
const struct ieee80211_channel *c = &chans[i];
if ((c->ic_flags & flags) == flags)
return 1;
}
return 0;
}
/*
* Check channel compatibility.
*/
static int
checkchan(const struct ieee80211req_chaninfo *avail, int freq, int flags)
{
flags &= ~REQ_FLAGS;
/*
* Check if exact channel is in the calibration table;
* everything below is to deal with channels that we
* want to include but that are not explicitly listed.
*/
if (flags & IEEE80211_CHAN_HT40) {
/* NB: we use an HT40 channel center that matches HT20 */
flags = (flags &~ IEEE80211_CHAN_HT40) | IEEE80211_CHAN_HT20;
}
if (chanlookup(avail->ic_chans, avail->ic_nchans, freq, flags) != NULL)
return 1;
if (flags & IEEE80211_CHAN_GSM) {
/*
* XXX GSM frequency mapping is handled in the kernel
* so we cannot find them in the calibration table;
* just accept the channel and the kernel will reject
* the channel list if it's wrong.
*/
return 1;
}
/*
* If this is a 1/2 or 1/4 width channel allow it if a full
* width channel is present for this frequency, and the device
* supports fractional channels on this band. This is a hack
* that avoids bloating the calibration table; it may be better
* by per-band attributes though (we are effectively calculating
* this attribute by scanning the channel list ourself).
*/
if ((flags & (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)) == 0)
return 0;
if (chanlookup(avail->ic_chans, avail->ic_nchans, freq,
flags &~ (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)) == NULL)
return 0;
if (flags & IEEE80211_CHAN_HALF) {
return chanfind(avail->ic_chans, avail->ic_nchans,
IEEE80211_CHAN_HALF |
(flags & (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ)));
} else {
return chanfind(avail->ic_chans, avail->ic_nchans,
IEEE80211_CHAN_QUARTER |
(flags & (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ)));
}
}
static void
regdomain_addchans(struct ieee80211req_chaninfo *ci,
const netband_head *bands,
const struct ieee80211_regdomain *reg,
uint32_t chanFlags,
const struct ieee80211req_chaninfo *avail)
{
const struct netband *nb;
const struct freqband *b;
struct ieee80211_channel *c, *prev;
int freq, hi_adj, lo_adj, channelSep;
uint32_t flags;
hi_adj = (chanFlags & IEEE80211_CHAN_HT40U) ? -20 : 0;
lo_adj = (chanFlags & IEEE80211_CHAN_HT40D) ? 20 : 0;
channelSep = (chanFlags & IEEE80211_CHAN_2GHZ) ? 0 : 40;
LIST_FOREACH(nb, bands, next) {
b = nb->band;
if (verbose) {
printf("%s:", __func__);
printb(" chanFlags", chanFlags, IEEE80211_CHAN_BITS);
printb(" bandFlags", nb->flags | b->flags,
IEEE80211_CHAN_BITS);
putchar('\n');
}
prev = NULL;
for (freq = b->freqStart + lo_adj;
freq <= b->freqEnd + hi_adj; freq += b->chanSep) {
/*
* Construct flags for the new channel. We take
* the attributes from the band descriptions except
* for HT40 which is enabled generically (i.e. +/-
* extension channel) in the band description and
* then constrained according by channel separation.
*/
flags = nb->flags | b->flags;
if (flags & IEEE80211_CHAN_HT) {
/*
* HT channels are generated specially; we're
* called to add HT20, HT40+, and HT40- chan's
* so we need to expand only band specs for
* the HT channel type being added.
*/
if ((chanFlags & IEEE80211_CHAN_HT20) &&
(flags & IEEE80211_CHAN_HT20) == 0) {
if (verbose)
printf("%u: skip, not an "
"HT20 channel\n", freq);
continue;
}
if ((chanFlags & IEEE80211_CHAN_HT40) &&
(flags & IEEE80211_CHAN_HT40) == 0) {
if (verbose)
printf("%u: skip, not an "
"HT40 channel\n", freq);
continue;
}
/* NB: HT attribute comes from caller */
flags &= ~IEEE80211_CHAN_HT;
flags |= chanFlags & IEEE80211_CHAN_HT;
}
/*
* Check if device can operate on this frequency.
*/
if (!checkchan(avail, freq, flags)) {
if (verbose) {
printf("%u: skip, ", freq);
printb("flags", flags,
IEEE80211_CHAN_BITS);
printf(" not available\n");
}
continue;
}
if ((flags & REQ_ECM) && !reg->ecm) {
if (verbose)
printf("%u: skip, ECM channel\n", freq);
continue;
}
if ((flags & REQ_INDOOR) && reg->location == 'O') {
if (verbose)
printf("%u: skip, indoor channel\n",
freq);
continue;
}
if ((flags & REQ_OUTDOOR) && reg->location == 'I') {
if (verbose)
printf("%u: skip, outdoor channel\n",
freq);
continue;
}
if ((flags & IEEE80211_CHAN_HT40) &&
prev != NULL && (freq - prev->ic_freq) < channelSep) {
if (verbose)
printf("%u: skip, only %u channel "
"separation, need %d\n", freq,
freq - prev->ic_freq, channelSep);
continue;
}
if (ci->ic_nchans == IEEE80211_CHAN_MAX) {
if (verbose)
printf("%u: skip, channel table full\n",
freq);
break;
}
c = &ci->ic_chans[ci->ic_nchans++];
memset(c, 0, sizeof(*c));
c->ic_freq = freq;
c->ic_flags = flags;
if (c->ic_flags & IEEE80211_CHAN_DFS)
c->ic_maxregpower = nb->maxPowerDFS;
else
c->ic_maxregpower = nb->maxPower;
if (verbose) {
printf("[%3d] add freq %u ",
ci->ic_nchans-1, c->ic_freq);
printb("flags", c->ic_flags, IEEE80211_CHAN_BITS);
printf(" power %u\n", c->ic_maxregpower);
}
/* NB: kernel fills in other fields */
prev = c;
}
}
}
static void
regdomain_makechannels(
struct ieee80211_regdomain_req *req,
const struct ieee80211_devcaps_req *dc)
{
struct regdata *rdp = getregdata();
const struct country *cc;
const struct ieee80211_regdomain *reg = &req->rd;
struct ieee80211req_chaninfo *ci = &req->chaninfo;
const struct regdomain *rd;
/*
* Locate construction table for new channel list. We treat
* the regdomain/SKU as definitive so a country can be in
* multiple with different properties (e.g. US in FCC+FCC3).
* If no regdomain is specified then we fallback on the country
* code to find the associated regdomain since countries always
* belong to at least one regdomain.
*/
if (reg->regdomain == 0) {
cc = lib80211_country_findbycc(rdp, reg->country);
if (cc == NULL)
errx(1, "internal error, country %d not found",
reg->country);
rd = cc->rd;
} else
rd = lib80211_regdomain_findbysku(rdp, reg->regdomain);
if (rd == NULL)
errx(1, "internal error, regdomain %d not found",
reg->regdomain);
if (rd->sku != SKU_DEBUG) {
/*
* regdomain_addchans incrememnts the channel count for
* each channel it adds so initialize ic_nchans to zero.
* Note that we know we have enough space to hold all possible
* channels because the devcaps list size was used to
* allocate our request.
*/
ci->ic_nchans = 0;
if (!LIST_EMPTY(&rd->bands_11b))
regdomain_addchans(ci, &rd->bands_11b, reg,
IEEE80211_CHAN_B, &dc->dc_chaninfo);
if (!LIST_EMPTY(&rd->bands_11g))
regdomain_addchans(ci, &rd->bands_11g, reg,
IEEE80211_CHAN_G, &dc->dc_chaninfo);
if (!LIST_EMPTY(&rd->bands_11a))
regdomain_addchans(ci, &rd->bands_11a, reg,
IEEE80211_CHAN_A, &dc->dc_chaninfo);
if (!LIST_EMPTY(&rd->bands_11na) && dc->dc_htcaps != 0) {
regdomain_addchans(ci, &rd->bands_11na, reg,
IEEE80211_CHAN_A | IEEE80211_CHAN_HT20,
&dc->dc_chaninfo);
if (dc->dc_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
regdomain_addchans(ci, &rd->bands_11na, reg,
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U,
&dc->dc_chaninfo);
regdomain_addchans(ci, &rd->bands_11na, reg,
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D,
&dc->dc_chaninfo);
}
}
if (!LIST_EMPTY(&rd->bands_11ng) && dc->dc_htcaps != 0) {
regdomain_addchans(ci, &rd->bands_11ng, reg,
IEEE80211_CHAN_G | IEEE80211_CHAN_HT20,
&dc->dc_chaninfo);
if (dc->dc_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
regdomain_addchans(ci, &rd->bands_11ng, reg,
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40U,
&dc->dc_chaninfo);
regdomain_addchans(ci, &rd->bands_11ng, reg,
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40D,
&dc->dc_chaninfo);
}
}
qsort(ci->ic_chans, ci->ic_nchans, sizeof(ci->ic_chans[0]),
regdomain_sort);
} else
memcpy(ci, &dc->dc_chaninfo,
IEEE80211_CHANINFO_SPACE(&dc->dc_chaninfo));
}
static void
list_countries(void)
{
struct regdata *rdp = getregdata();
const struct country *cp;
const struct regdomain *dp;
int i;
i = 0;
printf("\nCountry codes:\n");
LIST_FOREACH(cp, &rdp->countries, next) {
printf("%2s %-15.15s%s", cp->isoname,
cp->name, ((i+1)%4) == 0 ? "\n" : " ");
i++;
}
i = 0;
printf("\nRegulatory domains:\n");
LIST_FOREACH(dp, &rdp->domains, next) {
printf("%-15.15s%s", dp->name, ((i+1)%4) == 0 ? "\n" : " ");
i++;
}
printf("\n");
}
static void
defaultcountry(const struct regdomain *rd)
{
struct regdata *rdp = getregdata();
const struct country *cc;
cc = lib80211_country_findbycc(rdp, rd->cc->code);
if (cc == NULL)
errx(1, "internal error, ISO country code %d not "
"defined for regdomain %s", rd->cc->code, rd->name);
regdomain.country = cc->code;
regdomain.isocc[0] = cc->isoname[0];
regdomain.isocc[1] = cc->isoname[1];
}
static
DECL_CMD_FUNC(set80211regdomain, val, d)
{
struct regdata *rdp = getregdata();
const struct regdomain *rd;
rd = lib80211_regdomain_findbyname(rdp, val);
if (rd == NULL) {
char *eptr;
long sku = strtol(val, &eptr, 0);
if (eptr != val)
rd = lib80211_regdomain_findbysku(rdp, sku);
if (eptr == val || rd == NULL)
errx(1, "unknown regdomain %s", val);
}
getregdomain(s);
regdomain.regdomain = rd->sku;
if (regdomain.country == 0 && rd->cc != NULL) {
/*
* No country code setup and there's a default
* one for this regdomain fill it in.
*/
defaultcountry(rd);
}
callback_register(setregdomain_cb, &regdomain);
}
static
DECL_CMD_FUNC(set80211country, val, d)
{
struct regdata *rdp = getregdata();
const struct country *cc;
cc = lib80211_country_findbyname(rdp, val);
if (cc == NULL) {
char *eptr;
long code = strtol(val, &eptr, 0);
if (eptr != val)
cc = lib80211_country_findbycc(rdp, code);
if (eptr == val || cc == NULL)
errx(1, "unknown ISO country code %s", val);
}
getregdomain(s);
regdomain.regdomain = cc->rd->sku;
regdomain.country = cc->code;
regdomain.isocc[0] = cc->isoname[0];
regdomain.isocc[1] = cc->isoname[1];
callback_register(setregdomain_cb, &regdomain);
}
static void
set80211location(const char *val, int d, int s, const struct afswtch *rafp)
{
getregdomain(s);
regdomain.location = d;
callback_register(setregdomain_cb, &regdomain);
}
static void
set80211ecm(const char *val, int d, int s, const struct afswtch *rafp)
{
getregdomain(s);
regdomain.ecm = d;
callback_register(setregdomain_cb, &regdomain);
}
static void
LINE_INIT(char c)
{
spacer = c;
if (c == '\t')
col = 8;
else
col = 1;
}
static void
LINE_BREAK(void)
{
if (spacer != '\t') {
printf("\n");
spacer = '\t';
}
col = 8; /* 8-col tab */
}
static void
LINE_CHECK(const char *fmt, ...)
{
char buf[80];
va_list ap;
int n;
va_start(ap, fmt);
n = vsnprintf(buf+1, sizeof(buf)-1, fmt, ap);
va_end(ap);
col += 1+n;
if (col > MAXCOL) {
LINE_BREAK();
col += n;
}
buf[0] = spacer;
printf("%s", buf);
spacer = ' ';
}
static int
getmaxrate(const uint8_t rates[15], uint8_t nrates)
{
int i, maxrate = -1;
for (i = 0; i < nrates; i++) {
int rate = rates[i] & IEEE80211_RATE_VAL;
if (rate > maxrate)
maxrate = rate;
}
return maxrate / 2;
}
static const char *
getcaps(int capinfo)
{
static char capstring[32];
char *cp = capstring;
if (capinfo & IEEE80211_CAPINFO_ESS)
*cp++ = 'E';
if (capinfo & IEEE80211_CAPINFO_IBSS)
*cp++ = 'I';
if (capinfo & IEEE80211_CAPINFO_CF_POLLABLE)
*cp++ = 'c';
if (capinfo & IEEE80211_CAPINFO_CF_POLLREQ)
*cp++ = 'C';
if (capinfo & IEEE80211_CAPINFO_PRIVACY)
*cp++ = 'P';
if (capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)
*cp++ = 'S';
if (capinfo & IEEE80211_CAPINFO_PBCC)
*cp++ = 'B';
if (capinfo & IEEE80211_CAPINFO_CHNL_AGILITY)
*cp++ = 'A';
if (capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)
*cp++ = 's';
if (capinfo & IEEE80211_CAPINFO_RSN)
*cp++ = 'R';
if (capinfo & IEEE80211_CAPINFO_DSSSOFDM)
*cp++ = 'D';
*cp = '\0';
return capstring;
}
static const char *
getflags(int flags)
{
static char flagstring[32];
char *cp = flagstring;
if (flags & IEEE80211_NODE_AUTH)
*cp++ = 'A';
if (flags & IEEE80211_NODE_QOS)
*cp++ = 'Q';
if (flags & IEEE80211_NODE_ERP)
*cp++ = 'E';
if (flags & IEEE80211_NODE_PWR_MGT)
*cp++ = 'P';
if (flags & IEEE80211_NODE_HT) {
*cp++ = 'H';
if (flags & IEEE80211_NODE_HTCOMPAT)
*cp++ = '+';
}
if (flags & IEEE80211_NODE_WPS)
*cp++ = 'W';
if (flags & IEEE80211_NODE_TSN)
*cp++ = 'N';
if (flags & IEEE80211_NODE_AMPDU_TX)
*cp++ = 'T';
if (flags & IEEE80211_NODE_AMPDU_RX)
*cp++ = 'R';
if (flags & IEEE80211_NODE_MIMO_PS) {
*cp++ = 'M';
if (flags & IEEE80211_NODE_MIMO_RTS)
*cp++ = '+';
}
if (flags & IEEE80211_NODE_RIFS)
*cp++ = 'I';
if (flags & IEEE80211_NODE_SGI40) {
*cp++ = 'S';
if (flags & IEEE80211_NODE_SGI20)
*cp++ = '+';
} else if (flags & IEEE80211_NODE_SGI20)
*cp++ = 's';
if (flags & IEEE80211_NODE_AMSDU_TX)
*cp++ = 't';
if (flags & IEEE80211_NODE_AMSDU_RX)
*cp++ = 'r';
*cp = '\0';
return flagstring;
}
static void
printie(const char* tag, const uint8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose) {
maxlen -= strlen(tag)+2;
if (2*ielen > maxlen)
maxlen--;
printf("<");
for (; ielen > 0; ie++, ielen--) {
if (maxlen-- <= 0)
break;
printf("%02x", *ie);
}
if (ielen != 0)
printf("-");
printf(">");
}
}
#define LE_READ_2(p) \
((u_int16_t) \
((((const u_int8_t *)(p))[0] ) | \
(((const u_int8_t *)(p))[1] << 8)))
#define LE_READ_4(p) \
((u_int32_t) \
((((const u_int8_t *)(p))[0] ) | \
(((const u_int8_t *)(p))[1] << 8) | \
(((const u_int8_t *)(p))[2] << 16) | \
(((const u_int8_t *)(p))[3] << 24)))
/*
* NB: The decoding routines assume a properly formatted ie
* which should be safe as the kernel only retains them
* if they parse ok.
*/
static void
printwmeparam(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
static const char *acnames[] = { "BE", "BK", "VO", "VI" };
const struct ieee80211_wme_param *wme =
(const struct ieee80211_wme_param *) ie;
int i;
printf("%s", tag);
if (!verbose)
return;
printf("<qosinfo 0x%x", wme->param_qosInfo);
ie += offsetof(struct ieee80211_wme_param, params_acParams);
for (i = 0; i < WME_NUM_AC; i++) {
const struct ieee80211_wme_acparams *ac =
&wme->params_acParams[i];
printf(" %s[%saifsn %u cwmin %u cwmax %u txop %u]"
, acnames[i]
, MS(ac->acp_aci_aifsn, WME_PARAM_ACM) ? "acm " : ""
, MS(ac->acp_aci_aifsn, WME_PARAM_AIFSN)
, MS(ac->acp_logcwminmax, WME_PARAM_LOGCWMIN)
, MS(ac->acp_logcwminmax, WME_PARAM_LOGCWMAX)
, LE_READ_2(&ac->acp_txop)
);
}
printf(">");
#undef MS
}
static void
printwmeinfo(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose) {
const struct ieee80211_wme_info *wme =
(const struct ieee80211_wme_info *) ie;
printf("<version 0x%x info 0x%x>",
wme->wme_version, wme->wme_info);
}
}
static void
printhtcap(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose) {
const struct ieee80211_ie_htcap *htcap =
(const struct ieee80211_ie_htcap *) ie;
const char *sep;
int i, j;
printf("<cap 0x%x param 0x%x",
LE_READ_2(&htcap->hc_cap), htcap->hc_param);
printf(" mcsset[");
sep = "";
for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++)
if (isset(htcap->hc_mcsset, i)) {
for (j = i+1; j < IEEE80211_HTRATE_MAXSIZE; j++)
if (isclr(htcap->hc_mcsset, j))
break;
j--;
if (i == j)
printf("%s%u", sep, i);
else
printf("%s%u-%u", sep, i, j);
i += j-i;
sep = ",";
}
printf("] extcap 0x%x txbf 0x%x antenna 0x%x>",
LE_READ_2(&htcap->hc_extcap),
LE_READ_4(&htcap->hc_txbf),
htcap->hc_antenna);
}
}
static void
printhtinfo(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose) {
const struct ieee80211_ie_htinfo *htinfo =
(const struct ieee80211_ie_htinfo *) ie;
const char *sep;
int i, j;
printf("<ctl %u, %x,%x,%x,%x", htinfo->hi_ctrlchannel,
htinfo->hi_byte1, htinfo->hi_byte2, htinfo->hi_byte3,
LE_READ_2(&htinfo->hi_byte45));
printf(" basicmcs[");
sep = "";
for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++)
if (isset(htinfo->hi_basicmcsset, i)) {
for (j = i+1; j < IEEE80211_HTRATE_MAXSIZE; j++)
if (isclr(htinfo->hi_basicmcsset, j))
break;
j--;
if (i == j)
printf("%s%u", sep, i);
else
printf("%s%u-%u", sep, i, j);
i += j-i;
sep = ",";
}
printf("]>");
}
}
static void
printathie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose) {
const struct ieee80211_ath_ie *ath =
(const struct ieee80211_ath_ie *)ie;
printf("<");
if (ath->ath_capability & ATHEROS_CAP_TURBO_PRIME)
printf("DTURBO,");
if (ath->ath_capability & ATHEROS_CAP_COMPRESSION)
printf("COMP,");
if (ath->ath_capability & ATHEROS_CAP_FAST_FRAME)
printf("FF,");
if (ath->ath_capability & ATHEROS_CAP_XR)
printf("XR,");
if (ath->ath_capability & ATHEROS_CAP_AR)
printf("AR,");
if (ath->ath_capability & ATHEROS_CAP_BURST)
printf("BURST,");
if (ath->ath_capability & ATHEROS_CAP_WME)
printf("WME,");
if (ath->ath_capability & ATHEROS_CAP_BOOST)
printf("BOOST,");
printf("0x%x>", LE_READ_2(ath->ath_defkeyix));
}
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void
printmeshconf(const char *tag, const uint8_t *ie, size_t ielen, int maxlen)
{
#define MATCHOUI(field, oui, string) \
do { \
if (memcmp(field, oui, 4) == 0) \
printf("%s", string); \
} while (0)
printf("%s", tag);
if (verbose) {
const struct ieee80211_meshconf_ie *mconf =
(const struct ieee80211_meshconf_ie *)ie;
printf("<PATH:");
if (mconf->conf_pselid == IEEE80211_MESHCONF_PATH_HWMP)
printf("HWMP");
else
printf("UNKNOWN");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf(" LINK:");
if (mconf->conf_pmetid == IEEE80211_MESHCONF_METRIC_AIRTIME)
printf("AIRTIME");
else
printf("UNKNOWN");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf(" CONGESTION:");
if (mconf->conf_ccid == IEEE80211_MESHCONF_CC_DISABLED)
printf("DISABLED");
else
printf("UNKNOWN");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf(" SYNC:");
if (mconf->conf_syncid == IEEE80211_MESHCONF_SYNC_NEIGHOFF)
printf("NEIGHOFF");
else
printf("UNKNOWN");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf(" AUTH:");
if (mconf->conf_authid == IEEE80211_MESHCONF_AUTH_DISABLED)
printf("DISABLED");
else
printf("UNKNOWN");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf(" FORM:0x%x CAPS:0x%x>", mconf->conf_form,
mconf->conf_cap);
}
#undef MATCHOUI
}
static const char *
wpa_cipher(const u_int8_t *sel)
{
#define WPA_SEL(x) (((x)<<24)|WPA_OUI)
u_int32_t w = LE_READ_4(sel);
switch (w) {
case WPA_SEL(WPA_CSE_NULL):
return "NONE";
case WPA_SEL(WPA_CSE_WEP40):
return "WEP40";
case WPA_SEL(WPA_CSE_WEP104):
return "WEP104";
case WPA_SEL(WPA_CSE_TKIP):
return "TKIP";
case WPA_SEL(WPA_CSE_CCMP):
return "AES-CCMP";
}
return "?"; /* NB: so 1<< is discarded */
#undef WPA_SEL
}
static const char *
wpa_keymgmt(const u_int8_t *sel)
{
#define WPA_SEL(x) (((x)<<24)|WPA_OUI)
u_int32_t w = LE_READ_4(sel);
switch (w) {
case WPA_SEL(WPA_ASE_8021X_UNSPEC):
return "8021X-UNSPEC";
case WPA_SEL(WPA_ASE_8021X_PSK):
return "8021X-PSK";
case WPA_SEL(WPA_ASE_NONE):
return "NONE";
}
return "?";
#undef WPA_SEL
}
static void
printwpaie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
u_int8_t len = ie[1];
printf("%s", tag);
if (verbose) {
const char *sep;
int n;
ie += 6, len -= 4; /* NB: len is payload only */
printf("<v%u", LE_READ_2(ie));
ie += 2, len -= 2;
printf(" mc:%s", wpa_cipher(ie));
ie += 4, len -= 4;
/* unicast ciphers */
n = LE_READ_2(ie);
ie += 2, len -= 2;
sep = " uc:";
for (; n > 0; n--) {
printf("%s%s", sep, wpa_cipher(ie));
ie += 4, len -= 4;
sep = "+";
}
/* key management algorithms */
n = LE_READ_2(ie);
ie += 2, len -= 2;
sep = " km:";
for (; n > 0; n--) {
printf("%s%s", sep, wpa_keymgmt(ie));
ie += 4, len -= 4;
sep = "+";
}
if (len > 2) /* optional capabilities */
printf(", caps 0x%x", LE_READ_2(ie));
printf(">");
}
}
static const char *
rsn_cipher(const u_int8_t *sel)
{
#define RSN_SEL(x) (((x)<<24)|RSN_OUI)
u_int32_t w = LE_READ_4(sel);
switch (w) {
case RSN_SEL(RSN_CSE_NULL):
return "NONE";
case RSN_SEL(RSN_CSE_WEP40):
return "WEP40";
case RSN_SEL(RSN_CSE_WEP104):
return "WEP104";
case RSN_SEL(RSN_CSE_TKIP):
return "TKIP";
case RSN_SEL(RSN_CSE_CCMP):
return "AES-CCMP";
case RSN_SEL(RSN_CSE_WRAP):
return "AES-OCB";
}
return "?";
#undef WPA_SEL
}
static const char *
rsn_keymgmt(const u_int8_t *sel)
{
#define RSN_SEL(x) (((x)<<24)|RSN_OUI)
u_int32_t w = LE_READ_4(sel);
switch (w) {
case RSN_SEL(RSN_ASE_8021X_UNSPEC):
return "8021X-UNSPEC";
case RSN_SEL(RSN_ASE_8021X_PSK):
return "8021X-PSK";
case RSN_SEL(RSN_ASE_NONE):
return "NONE";
}
return "?";
#undef RSN_SEL
}
static void
printrsnie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose) {
const char *sep;
int n;
ie += 2, ielen -= 2;
printf("<v%u", LE_READ_2(ie));
ie += 2, ielen -= 2;
printf(" mc:%s", rsn_cipher(ie));
ie += 4, ielen -= 4;
/* unicast ciphers */
n = LE_READ_2(ie);
ie += 2, ielen -= 2;
sep = " uc:";
for (; n > 0; n--) {
printf("%s%s", sep, rsn_cipher(ie));
ie += 4, ielen -= 4;
sep = "+";
}
/* key management algorithms */
n = LE_READ_2(ie);
ie += 2, ielen -= 2;
sep = " km:";
for (; n > 0; n--) {
printf("%s%s", sep, rsn_keymgmt(ie));
ie += 4, ielen -= 4;
sep = "+";
}
if (ielen > 2) /* optional capabilities */
printf(", caps 0x%x", LE_READ_2(ie));
/* XXXPMKID */
printf(">");
}
}
/* XXX move to a public include file */
#define IEEE80211_WPS_DEV_PASS_ID 0x1012
#define IEEE80211_WPS_SELECTED_REG 0x1041
#define IEEE80211_WPS_SETUP_STATE 0x1044
#define IEEE80211_WPS_UUID_E 0x1047
#define IEEE80211_WPS_VERSION 0x104a
#define BE_READ_2(p) \
((u_int16_t) \
((((const u_int8_t *)(p))[1] ) | \
(((const u_int8_t *)(p))[0] << 8)))
static void
printwpsie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
u_int8_t len = ie[1];
printf("%s", tag);
if (verbose) {
static const char *dev_pass_id[] = {
"D", /* Default (PIN) */
"U", /* User-specified */
"M", /* Machine-specified */
"K", /* Rekey */
"P", /* PushButton */
"R" /* Registrar-specified */
};
int n;
ie +=6, len -= 4; /* NB: len is payload only */
/* WPS IE in Beacon and Probe Resp frames have different fields */
printf("<");
while (len) {
uint16_t tlv_type = BE_READ_2(ie);
uint16_t tlv_len = BE_READ_2(ie + 2);
ie += 4, len -= 4;
switch (tlv_type) {
case IEEE80211_WPS_VERSION:
printf("v:%d.%d", *ie >> 4, *ie & 0xf);
break;
case IEEE80211_WPS_SETUP_STATE:
/* Only 1 and 2 are valid */
if (*ie == 0 || *ie >= 3)
printf(" state:B");
else
printf(" st:%s", *ie == 1 ? "N" : "C");
break;
case IEEE80211_WPS_SELECTED_REG:
printf(" sel:%s", *ie ? "T" : "F");
break;
case IEEE80211_WPS_DEV_PASS_ID:
n = LE_READ_2(ie);
if (n < nitems(dev_pass_id))
printf(" dpi:%s", dev_pass_id[n]);
break;
case IEEE80211_WPS_UUID_E:
printf(" uuid-e:");
for (n = 0; n < (tlv_len - 1); n++)
printf("%02x-", ie[n]);
printf("%02x", ie[n]);
break;
}
ie += tlv_len, len -= tlv_len;
}
printf(">");
}
}
static void
printtdmaie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
printf("%s", tag);
if (verbose && ielen >= sizeof(struct ieee80211_tdma_param)) {
const struct ieee80211_tdma_param *tdma =
(const struct ieee80211_tdma_param *) ie;
/* XXX tstamp */
printf("<v%u slot:%u slotcnt:%u slotlen:%u bintval:%u inuse:0x%x>",
tdma->tdma_version, tdma->tdma_slot, tdma->tdma_slotcnt,
LE_READ_2(&tdma->tdma_slotlen), tdma->tdma_bintval,
tdma->tdma_inuse[0]);
}
}
/*
* Copy the ssid string contents into buf, truncating to fit. If the
* ssid is entirely printable then just copy intact. Otherwise convert
* to hexadecimal. If the result is truncated then replace the last
* three characters with "...".
*/
static int
copy_essid(char buf[], size_t bufsize, const u_int8_t *essid, size_t essid_len)
{
const u_int8_t *p;
size_t maxlen;
int i;
if (essid_len > bufsize)
maxlen = bufsize;
else
maxlen = essid_len;
/* determine printable or not */
for (i = 0, p = essid; i < maxlen; i++, p++) {
if (*p < ' ' || *p > 0x7e)
break;
}
if (i != maxlen) { /* not printable, print as hex */
if (bufsize < 3)
return 0;
strlcpy(buf, "0x", bufsize);
bufsize -= 2;
p = essid;
for (i = 0; i < maxlen && bufsize >= 2; i++) {
sprintf(&buf[2+2*i], "%02x", p[i]);
bufsize -= 2;
}
if (i != essid_len)
memcpy(&buf[2+2*i-3], "...", 3);
} else { /* printable, truncate as needed */
memcpy(buf, essid, maxlen);
if (maxlen != essid_len)
memcpy(&buf[maxlen-3], "...", 3);
}
return maxlen;
}
static void
printssid(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
char ssid[2*IEEE80211_NWID_LEN+1];
printf("%s<%.*s>", tag, copy_essid(ssid, maxlen, ie+2, ie[1]), ssid);
}
static void
printrates(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
const char *sep;
int i;
printf("%s", tag);
sep = "<";
for (i = 2; i < ielen; i++) {
printf("%s%s%d", sep,
ie[i] & IEEE80211_RATE_BASIC ? "B" : "",
ie[i] & IEEE80211_RATE_VAL);
sep = ",";
}
printf(">");
}
static void
printcountry(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
{
const struct ieee80211_country_ie *cie =
(const struct ieee80211_country_ie *) ie;
int i, nbands, schan, nchan;
printf("%s<%c%c%c", tag, cie->cc[0], cie->cc[1], cie->cc[2]);
nbands = (cie->len - 3) / sizeof(cie->band[0]);
for (i = 0; i < nbands; i++) {
schan = cie->band[i].schan;
nchan = cie->band[i].nchan;
if (nchan != 1)
printf(" %u-%u,%u", schan, schan + nchan-1,
cie->band[i].maxtxpwr);
else
printf(" %u,%u", schan, cie->band[i].maxtxpwr);
}
printf(">");
}
2005-08-03 20:57:33 +00:00
/* unaligned little endian access */
#define LE_READ_4(p) \
((u_int32_t) \
((((const u_int8_t *)(p))[0] ) | \
(((const u_int8_t *)(p))[1] << 8) | \
(((const u_int8_t *)(p))[2] << 16) | \
(((const u_int8_t *)(p))[3] << 24)))
static __inline int
iswpaoui(const u_int8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
}
static __inline int
iswmeinfo(const u_int8_t *frm)
{
return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
frm[6] == WME_INFO_OUI_SUBTYPE;
}
static __inline int
iswmeparam(const u_int8_t *frm)
{
return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
frm[6] == WME_PARAM_OUI_SUBTYPE;
}
static __inline int
isatherosoui(const u_int8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
}
static __inline int
istdmaoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI);
}
static __inline int
iswpsoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((WPS_OUI_TYPE<<24)|WPA_OUI);
}
static const char *
iename(int elemid)
{
switch (elemid) {
case IEEE80211_ELEMID_FHPARMS: return " FHPARMS";
case IEEE80211_ELEMID_CFPARMS: return " CFPARMS";
case IEEE80211_ELEMID_TIM: return " TIM";
case IEEE80211_ELEMID_IBSSPARMS:return " IBSSPARMS";
case IEEE80211_ELEMID_BSSLOAD: return " BSSLOAD";
case IEEE80211_ELEMID_CHALLENGE:return " CHALLENGE";
case IEEE80211_ELEMID_PWRCNSTR: return " PWRCNSTR";
case IEEE80211_ELEMID_PWRCAP: return " PWRCAP";
case IEEE80211_ELEMID_TPCREQ: return " TPCREQ";
case IEEE80211_ELEMID_TPCREP: return " TPCREP";
case IEEE80211_ELEMID_SUPPCHAN: return " SUPPCHAN";
case IEEE80211_ELEMID_CSA: return " CSA";
case IEEE80211_ELEMID_MEASREQ: return " MEASREQ";
case IEEE80211_ELEMID_MEASREP: return " MEASREP";
case IEEE80211_ELEMID_QUIET: return " QUIET";
case IEEE80211_ELEMID_IBSSDFS: return " IBSSDFS";
case IEEE80211_ELEMID_APCHANREP:return " APCHANREP";
case IEEE80211_ELEMID_TPC: return " TPC";
case IEEE80211_ELEMID_CCKM: return " CCKM";
}
return " ???";
}
static void
printies(const u_int8_t *vp, int ielen, int maxcols)
{
while (ielen > 0) {
switch (vp[0]) {
case IEEE80211_ELEMID_SSID:
if (verbose)
printssid(" SSID", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_RATES:
case IEEE80211_ELEMID_XRATES:
if (verbose)
printrates(vp[0] == IEEE80211_ELEMID_RATES ?
" RATES" : " XRATES", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_DSPARMS:
if (verbose)
printf(" DSPARMS<%u>", vp[2]);
break;
case IEEE80211_ELEMID_COUNTRY:
if (verbose)
printcountry(" COUNTRY", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_ERP:
if (verbose)
printf(" ERP<0x%x>", vp[2]);
break;
case IEEE80211_ELEMID_VENDOR:
if (iswpaoui(vp))
printwpaie(" WPA", vp, 2+vp[1], maxcols);
else if (iswmeinfo(vp))
printwmeinfo(" WME", vp, 2+vp[1], maxcols);
else if (iswmeparam(vp))
printwmeparam(" WME", vp, 2+vp[1], maxcols);
2004-12-31 19:37:02 +00:00
else if (isatherosoui(vp))
printathie(" ATH", vp, 2+vp[1], maxcols);
else if (iswpsoui(vp))
printwpsie(" WPS", vp, 2+vp[1], maxcols);
else if (istdmaoui(vp))
printtdmaie(" TDMA", vp, 2+vp[1], maxcols);
else if (verbose)
printie(" VEN", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_RSN:
printrsnie(" RSN", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_HTCAP:
printhtcap(" HTCAP", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_HTINFO:
if (verbose)
printhtinfo(" HTINFO", vp, 2+vp[1], maxcols);
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
case IEEE80211_ELEMID_MESHID:
if (verbose)
printssid(" MESHID", vp, 2+vp[1], maxcols);
break;
case IEEE80211_ELEMID_MESHCONF:
printmeshconf(" MESHCONF", vp, 2+vp[1], maxcols);
break;
default:
if (verbose)
printie(iename(vp[0]), vp, 2+vp[1], maxcols);
break;
}
ielen -= 2+vp[1];
vp += 2+vp[1];
}
}
static void
printmimo(const struct ieee80211_mimo_info *mi)
{
/* NB: don't muddy display unless there's something to show */
if (mi->rssi[0] != 0 || mi->rssi[1] != 0 || mi->rssi[2] != 0) {
/* XXX ignore EVM for now */
printf(" (rssi %d:%d:%d nf %d:%d:%d)",
mi->rssi[0], mi->rssi[1], mi->rssi[2],
mi->noise[0], mi->noise[1], mi->noise[2]);
}
}
static void
list_scan(int s)
{
uint8_t buf[24*1024];
char ssid[IEEE80211_NWID_LEN+1];
const uint8_t *cp;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
int len, ssidmax, idlen;
if (get80211len(s, IEEE80211_IOC_SCAN_RESULTS, buf, sizeof(buf), &len) < 0)
errx(1, "unable to get scan results");
if (len < sizeof(struct ieee80211req_scan_result))
return;
getchaninfo(s);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ssidmax = verbose ? IEEE80211_NWID_LEN - 1 : 14;
printf("%-*.*s %-17.17s %4s %4s %-7s %3s %4s\n"
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
, ssidmax, ssidmax, "SSID/MESH ID"
, "BSSID"
, "CHAN"
, "RATE"
, " S:N"
, "INT"
, "CAPS"
);
cp = buf;
do {
const struct ieee80211req_scan_result *sr;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
const uint8_t *vp, *idp;
sr = (const struct ieee80211req_scan_result *) cp;
vp = cp + sr->isr_ie_off;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (sr->isr_meshid_len) {
idp = vp + sr->isr_ssid_len;
idlen = sr->isr_meshid_len;
} else {
idp = vp;
idlen = sr->isr_ssid_len;
}
printf("%-*.*s %s %3d %3dM %4d:%-4d %4d %-4.4s"
, ssidmax
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
, copy_essid(ssid, ssidmax, idp, idlen)
, ssid
, ether_ntoa((const struct ether_addr *) sr->isr_bssid)
, ieee80211_mhz2ieee(sr->isr_freq, sr->isr_flags)
, getmaxrate(sr->isr_rates, sr->isr_nrates)
, (sr->isr_rssi/2)+sr->isr_noise, sr->isr_noise
, sr->isr_intval
, getcaps(sr->isr_capinfo)
);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printies(vp + sr->isr_ssid_len + sr->isr_meshid_len,
sr->isr_ie_len, 24);
printf("\n");
cp += sr->isr_len, len -= sr->isr_len;
} while (len >= sizeof(struct ieee80211req_scan_result));
}
static void
scan_and_wait(int s)
{
struct ieee80211_scan_req sr;
struct ieee80211req ireq;
int sroute;
sroute = socket(PF_ROUTE, SOCK_RAW, 0);
if (sroute < 0) {
perror("socket(PF_ROUTE,SOCK_RAW)");
return;
}
(void) memset(&ireq, 0, sizeof(ireq));
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
ireq.i_type = IEEE80211_IOC_SCAN_REQ;
memset(&sr, 0, sizeof(sr));
sr.sr_flags = IEEE80211_IOC_SCAN_ACTIVE
| IEEE80211_IOC_SCAN_BGSCAN
| IEEE80211_IOC_SCAN_NOPICK
| IEEE80211_IOC_SCAN_ONCE;
sr.sr_duration = IEEE80211_IOC_SCAN_FOREVER;
sr.sr_nssid = 0;
ireq.i_data = &sr;
ireq.i_len = sizeof(sr);
/*
* NB: only root can trigger a scan so ignore errors. Also ignore
* possible errors from net80211, even if no new scan could be
* started there might still be a valid scan cache.
*/
if (ioctl(s, SIOCS80211, &ireq) == 0) {
char buf[2048];
struct if_announcemsghdr *ifan;
struct rt_msghdr *rtm;
do {
if (read(sroute, buf, sizeof(buf)) < 0) {
perror("read(PF_ROUTE)");
break;
}
rtm = (struct rt_msghdr *) buf;
if (rtm->rtm_version != RTM_VERSION)
break;
ifan = (struct if_announcemsghdr *) rtm;
} while (rtm->rtm_type != RTM_IEEE80211 ||
ifan->ifan_what != RTM_IEEE80211_SCAN);
}
close(sroute);
}
static
DECL_CMD_FUNC(set80211scan, val, d)
{
scan_and_wait(s);
list_scan(s);
}
static enum ieee80211_opmode get80211opmode(int s);
static int
gettxseq(const struct ieee80211req_sta_info *si)
{
int i, txseq;
if ((si->isi_state & IEEE80211_NODE_QOS) == 0)
return si->isi_txseqs[0];
/* XXX not right but usually what folks want */
txseq = 0;
for (i = 0; i < IEEE80211_TID_SIZE; i++)
if (si->isi_txseqs[i] > txseq)
txseq = si->isi_txseqs[i];
return txseq;
}
static int
getrxseq(const struct ieee80211req_sta_info *si)
{
int i, rxseq;
if ((si->isi_state & IEEE80211_NODE_QOS) == 0)
return si->isi_rxseqs[0];
/* XXX not right but usually what folks want */
rxseq = 0;
for (i = 0; i < IEEE80211_TID_SIZE; i++)
if (si->isi_rxseqs[i] > rxseq)
rxseq = si->isi_rxseqs[i];
return rxseq;
}
static void
list_stations(int s)
{
union {
struct ieee80211req_sta_req req;
uint8_t buf[24*1024];
} u;
enum ieee80211_opmode opmode = get80211opmode(s);
const uint8_t *cp;
int len;
/* broadcast address =>'s get all stations */
(void) memset(u.req.is_u.macaddr, 0xff, IEEE80211_ADDR_LEN);
if (opmode == IEEE80211_M_STA) {
/*
* Get information about the associated AP.
*/
(void) get80211(s, IEEE80211_IOC_BSSID,
u.req.is_u.macaddr, IEEE80211_ADDR_LEN);
}
if (get80211len(s, IEEE80211_IOC_STA_INFO, &u, sizeof(u), &len) < 0)
errx(1, "unable to get station information");
if (len < sizeof(struct ieee80211req_sta_info))
return;
getchaninfo(s);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (opmode == IEEE80211_M_MBSS)
printf("%-17.17s %4s %5s %5s %7s %4s %4s %4s %6s %6s\n"
, "ADDR"
, "CHAN"
, "LOCAL"
, "PEER"
, "STATE"
, "RATE"
, "RSSI"
, "IDLE"
, "TXSEQ"
, "RXSEQ"
);
else
printf("%-17.17s %4s %4s %4s %4s %4s %6s %6s %4s %-7s\n"
, "ADDR"
, "AID"
, "CHAN"
, "RATE"
, "RSSI"
, "IDLE"
, "TXSEQ"
, "RXSEQ"
, "CAPS"
, "FLAG"
);
cp = (const uint8_t *) u.req.info;
do {
const struct ieee80211req_sta_info *si;
si = (const struct ieee80211req_sta_info *) cp;
if (si->isi_len < sizeof(*si))
break;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (opmode == IEEE80211_M_MBSS)
printf("%s %4d %5x %5x %7.7s %3dM %4.1f %4d %6d %6d"
, ether_ntoa((const struct ether_addr*)
si->isi_macaddr)
, ieee80211_mhz2ieee(si->isi_freq,
si->isi_flags)
, si->isi_localid
, si->isi_peerid
, mesh_linkstate_string(si->isi_peerstate)
, si->isi_txmbps/2
, si->isi_rssi/2.
, si->isi_inact
, gettxseq(si)
, getrxseq(si)
);
else
printf("%s %4u %4d %3dM %4.1f %4d %6d %6d %-4.4s %-7.7s"
, ether_ntoa((const struct ether_addr*)
si->isi_macaddr)
, IEEE80211_AID(si->isi_associd)
, ieee80211_mhz2ieee(si->isi_freq,
si->isi_flags)
, si->isi_txmbps/2
, si->isi_rssi/2.
, si->isi_inact
, gettxseq(si)
, getrxseq(si)
, getcaps(si->isi_capinfo)
, getflags(si->isi_state)
);
printies(cp + si->isi_ie_off, si->isi_ie_len, 24);
printmimo(&si->isi_mimo);
printf("\n");
cp += si->isi_len, len -= si->isi_len;
} while (len >= sizeof(struct ieee80211req_sta_info));
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static const char *
mesh_linkstate_string(uint8_t state)
{
static const char *state_names[] = {
[0] = "IDLE",
[1] = "OPEN-TX",
[2] = "OPEN-RX",
[3] = "CONF-RX",
[4] = "ESTAB",
[5] = "HOLDING",
};
if (state >= nitems(state_names)) {
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static char buf[10];
snprintf(buf, sizeof(buf), "#%u", state);
return buf;
} else
return state_names[state];
}
static const char *
get_chaninfo(const struct ieee80211_channel *c, int precise,
char buf[], size_t bsize)
{
buf[0] = '\0';
if (IEEE80211_IS_CHAN_FHSS(c))
strlcat(buf, " FHSS", bsize);
if (IEEE80211_IS_CHAN_A(c))
strlcat(buf, " 11a", bsize);
else if (IEEE80211_IS_CHAN_ANYG(c))
strlcat(buf, " 11g", bsize);
else if (IEEE80211_IS_CHAN_B(c))
strlcat(buf, " 11b", bsize);
if (IEEE80211_IS_CHAN_HALF(c))
strlcat(buf, "/10MHz", bsize);
if (IEEE80211_IS_CHAN_QUARTER(c))
strlcat(buf, "/5MHz", bsize);
if (IEEE80211_IS_CHAN_TURBO(c))
strlcat(buf, " Turbo", bsize);
if (precise) {
if (IEEE80211_IS_CHAN_HT20(c))
strlcat(buf, " ht/20", bsize);
else if (IEEE80211_IS_CHAN_HT40D(c))
strlcat(buf, " ht/40-", bsize);
else if (IEEE80211_IS_CHAN_HT40U(c))
strlcat(buf, " ht/40+", bsize);
} else {
if (IEEE80211_IS_CHAN_HT(c))
strlcat(buf, " ht", bsize);
}
return buf;
}
static void
print_chaninfo(const struct ieee80211_channel *c, int verb)
{
char buf[14];
if (verb)
printf("Channel %3u : %u%c%c%c%c%c MHz%-14.14s",
ieee80211_mhz2ieee(c->ic_freq, c->ic_flags), c->ic_freq,
IEEE80211_IS_CHAN_PASSIVE(c) ? '*' : ' ',
IEEE80211_IS_CHAN_DFS(c) ? 'D' : ' ',
IEEE80211_IS_CHAN_RADAR(c) ? 'R' : ' ',
IEEE80211_IS_CHAN_CWINT(c) ? 'I' : ' ',
IEEE80211_IS_CHAN_CACDONE(c) ? 'C' : ' ',
get_chaninfo(c, verb, buf, sizeof(buf)));
else
printf("Channel %3u : %u%c MHz%-14.14s",
ieee80211_mhz2ieee(c->ic_freq, c->ic_flags), c->ic_freq,
IEEE80211_IS_CHAN_PASSIVE(c) ? '*' : ' ',
get_chaninfo(c, verb, buf, sizeof(buf)));
}
static int
chanpref(const struct ieee80211_channel *c)
{
if (IEEE80211_IS_CHAN_HT40(c))
return 40;
if (IEEE80211_IS_CHAN_HT20(c))
return 30;
if (IEEE80211_IS_CHAN_HALF(c))
return 10;
if (IEEE80211_IS_CHAN_QUARTER(c))
return 5;
if (IEEE80211_IS_CHAN_TURBO(c))
return 25;
if (IEEE80211_IS_CHAN_A(c))
return 20;
if (IEEE80211_IS_CHAN_G(c))
return 20;
if (IEEE80211_IS_CHAN_B(c))
return 15;
if (IEEE80211_IS_CHAN_PUREG(c))
return 15;
return 0;
}
static void
print_channels(int s, const struct ieee80211req_chaninfo *chans,
int allchans, int verb)
{
struct ieee80211req_chaninfo *achans;
uint8_t reported[IEEE80211_CHAN_BYTES];
const struct ieee80211_channel *c;
int i, half;
achans = malloc(IEEE80211_CHANINFO_SPACE(chans));
if (achans == NULL)
errx(1, "no space for active channel list");
achans->ic_nchans = 0;
memset(reported, 0, sizeof(reported));
if (!allchans) {
struct ieee80211req_chanlist active;
if (get80211(s, IEEE80211_IOC_CHANLIST, &active, sizeof(active)) < 0)
errx(1, "unable to get active channel list");
for (i = 0; i < chans->ic_nchans; i++) {
c = &chans->ic_chans[i];
if (!isset(active.ic_channels, c->ic_ieee))
continue;
/*
* Suppress compatible duplicates unless
* verbose. The kernel gives us it's
* complete channel list which has separate
* entries for 11g/11b and 11a/turbo.
*/
if (isset(reported, c->ic_ieee) && !verb) {
/* XXX we assume duplicates are adjacent */
achans->ic_chans[achans->ic_nchans-1] = *c;
} else {
achans->ic_chans[achans->ic_nchans++] = *c;
setbit(reported, c->ic_ieee);
}
}
} else {
for (i = 0; i < chans->ic_nchans; i++) {
c = &chans->ic_chans[i];
/* suppress duplicates as above */
if (isset(reported, c->ic_ieee) && !verb) {
/* XXX we assume duplicates are adjacent */
struct ieee80211_channel *a =
&achans->ic_chans[achans->ic_nchans-1];
if (chanpref(c) > chanpref(a))
*a = *c;
} else {
achans->ic_chans[achans->ic_nchans++] = *c;
setbit(reported, c->ic_ieee);
}
}
}
half = achans->ic_nchans / 2;
if (achans->ic_nchans % 2)
half++;
for (i = 0; i < achans->ic_nchans / 2; i++) {
print_chaninfo(&achans->ic_chans[i], verb);
print_chaninfo(&achans->ic_chans[half+i], verb);
printf("\n");
}
if (achans->ic_nchans % 2) {
print_chaninfo(&achans->ic_chans[i], verb);
printf("\n");
}
free(achans);
}
static void
list_channels(int s, int allchans)
{
getchaninfo(s);
print_channels(s, chaninfo, allchans, verbose);
}
static void
print_txpow(const struct ieee80211_channel *c)
{
printf("Channel %3u : %u MHz %3.1f reg %2d ",
c->ic_ieee, c->ic_freq,
c->ic_maxpower/2., c->ic_maxregpower);
}
static void
print_txpow_verbose(const struct ieee80211_channel *c)
{
print_chaninfo(c, 1);
printf("min %4.1f dBm max %3.1f dBm reg %2d dBm",
c->ic_minpower/2., c->ic_maxpower/2., c->ic_maxregpower);
/* indicate where regulatory cap limits power use */
if (c->ic_maxpower > 2*c->ic_maxregpower)
printf(" <");
}
static void
list_txpow(int s)
{
struct ieee80211req_chaninfo *achans;
uint8_t reported[IEEE80211_CHAN_BYTES];
struct ieee80211_channel *c, *prev;
int i, half;
getchaninfo(s);
achans = malloc(IEEE80211_CHANINFO_SPACE(chaninfo));
if (achans == NULL)
errx(1, "no space for active channel list");
achans->ic_nchans = 0;
memset(reported, 0, sizeof(reported));
for (i = 0; i < chaninfo->ic_nchans; i++) {
c = &chaninfo->ic_chans[i];
/* suppress duplicates as above */
if (isset(reported, c->ic_ieee) && !verbose) {
/* XXX we assume duplicates are adjacent */
prev = &achans->ic_chans[achans->ic_nchans-1];
/* display highest power on channel */
if (c->ic_maxpower > prev->ic_maxpower)
*prev = *c;
} else {
achans->ic_chans[achans->ic_nchans++] = *c;
setbit(reported, c->ic_ieee);
}
}
if (!verbose) {
half = achans->ic_nchans / 2;
if (achans->ic_nchans % 2)
half++;
for (i = 0; i < achans->ic_nchans / 2; i++) {
print_txpow(&achans->ic_chans[i]);
print_txpow(&achans->ic_chans[half+i]);
printf("\n");
}
if (achans->ic_nchans % 2) {
print_txpow(&achans->ic_chans[i]);
printf("\n");
}
} else {
for (i = 0; i < achans->ic_nchans; i++) {
print_txpow_verbose(&achans->ic_chans[i]);
printf("\n");
}
}
free(achans);
}
static void
list_keys(int s)
{
}
#define IEEE80211_C_BITS \
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
"\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \
"\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
"\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
"\37TXFRAG\40TDMA"
static void
list_capabilities(int s)
{
struct ieee80211_devcaps_req *dc;
if (verbose)
dc = malloc(IEEE80211_DEVCAPS_SIZE(MAXCHAN));
else
dc = malloc(IEEE80211_DEVCAPS_SIZE(1));
if (dc == NULL)
errx(1, "no space for device capabilities");
dc->dc_chaninfo.ic_nchans = verbose ? MAXCHAN : 1;
getdevcaps(s, dc);
printb("drivercaps", dc->dc_drivercaps, IEEE80211_C_BITS);
if (dc->dc_cryptocaps != 0 || verbose) {
putchar('\n');
printb("cryptocaps", dc->dc_cryptocaps, IEEE80211_CRYPTO_BITS);
}
if (dc->dc_htcaps != 0 || verbose) {
putchar('\n');
printb("htcaps", dc->dc_htcaps, IEEE80211_HTCAP_BITS);
}
putchar('\n');
if (verbose) {
chaninfo = &dc->dc_chaninfo; /* XXX */
print_channels(s, &dc->dc_chaninfo, 1/*allchans*/, verbose);
}
free(dc);
}
static int
get80211wme(int s, int param, int ac, int *val)
{
struct ieee80211req ireq;
(void) memset(&ireq, 0, sizeof(ireq));
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
ireq.i_type = param;
ireq.i_len = ac;
if (ioctl(s, SIOCG80211, &ireq) < 0) {
warn("cannot get WME parameter %d, ac %d%s",
param, ac & IEEE80211_WMEPARAM_VAL,
ac & IEEE80211_WMEPARAM_BSS ? " (BSS)" : "");
return -1;
}
*val = ireq.i_val;
return 0;
}
static void
list_wme_aci(int s, const char *tag, int ac)
{
int val;
printf("\t%s", tag);
/* show WME BSS parameters */
if (get80211wme(s, IEEE80211_IOC_WME_CWMIN, ac, &val) != -1)
printf(" cwmin %2u", val);
if (get80211wme(s, IEEE80211_IOC_WME_CWMAX, ac, &val) != -1)
printf(" cwmax %2u", val);
if (get80211wme(s, IEEE80211_IOC_WME_AIFS, ac, &val) != -1)
printf(" aifs %2u", val);
if (get80211wme(s, IEEE80211_IOC_WME_TXOPLIMIT, ac, &val) != -1)
printf(" txopLimit %3u", val);
if (get80211wme(s, IEEE80211_IOC_WME_ACM, ac, &val) != -1) {
if (val)
printf(" acm");
else if (verbose)
printf(" -acm");
}
/* !BSS only */
if ((ac & IEEE80211_WMEPARAM_BSS) == 0) {
if (get80211wme(s, IEEE80211_IOC_WME_ACKPOLICY, ac, &val) != -1) {
if (!val)
printf(" -ack");
else if (verbose)
printf(" ack");
}
}
printf("\n");
}
static void
list_wme(int s)
{
static const char *acnames[] = { "AC_BE", "AC_BK", "AC_VI", "AC_VO" };
int ac;
if (verbose) {
/* display both BSS and local settings */
for (ac = WME_AC_BE; ac <= WME_AC_VO; ac++) {
again:
if (ac & IEEE80211_WMEPARAM_BSS)
list_wme_aci(s, " ", ac);
else
list_wme_aci(s, acnames[ac], ac);
if ((ac & IEEE80211_WMEPARAM_BSS) == 0) {
ac |= IEEE80211_WMEPARAM_BSS;
goto again;
} else
ac &= ~IEEE80211_WMEPARAM_BSS;
}
} else {
/* display only channel settings */
for (ac = WME_AC_BE; ac <= WME_AC_VO; ac++)
list_wme_aci(s, acnames[ac], ac);
}
}
static void
list_roam(int s)
{
const struct ieee80211_roamparam *rp;
int mode;
getroam(s);
for (mode = IEEE80211_MODE_11A; mode < IEEE80211_MODE_MAX; mode++) {
rp = &roamparams.params[mode];
if (rp->rssi == 0 && rp->rate == 0)
continue;
if (mode == IEEE80211_MODE_11NA || mode == IEEE80211_MODE_11NG) {
if (rp->rssi & 1)
LINE_CHECK("roam:%-7.7s rssi %2u.5dBm MCS %2u ",
modename[mode], rp->rssi/2,
rp->rate &~ IEEE80211_RATE_MCS);
else
LINE_CHECK("roam:%-7.7s rssi %4udBm MCS %2u ",
modename[mode], rp->rssi/2,
rp->rate &~ IEEE80211_RATE_MCS);
} else {
if (rp->rssi & 1)
LINE_CHECK("roam:%-7.7s rssi %2u.5dBm rate %2u Mb/s",
modename[mode], rp->rssi/2, rp->rate/2);
else
LINE_CHECK("roam:%-7.7s rssi %4udBm rate %2u Mb/s",
modename[mode], rp->rssi/2, rp->rate/2);
}
}
}
static void
list_txparams(int s)
{
const struct ieee80211_txparam *tp;
int mode;
gettxparams(s);
for (mode = IEEE80211_MODE_11A; mode < IEEE80211_MODE_MAX; mode++) {
tp = &txparams.params[mode];
if (tp->mgmtrate == 0 && tp->mcastrate == 0)
continue;
if (mode == IEEE80211_MODE_11NA || mode == IEEE80211_MODE_11NG) {
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
LINE_CHECK("%-7.7s ucast NONE mgmt %2u MCS "
"mcast %2u MCS maxretry %u",
modename[mode],
tp->mgmtrate &~ IEEE80211_RATE_MCS,
tp->mcastrate &~ IEEE80211_RATE_MCS,
tp->maxretry);
else
LINE_CHECK("%-7.7s ucast %2u MCS mgmt %2u MCS "
"mcast %2u MCS maxretry %u",
modename[mode],
tp->ucastrate &~ IEEE80211_RATE_MCS,
tp->mgmtrate &~ IEEE80211_RATE_MCS,
tp->mcastrate &~ IEEE80211_RATE_MCS,
tp->maxretry);
} else {
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
LINE_CHECK("%-7.7s ucast NONE mgmt %2u Mb/s "
"mcast %2u Mb/s maxretry %u",
modename[mode],
tp->mgmtrate/2,
tp->mcastrate/2, tp->maxretry);
else
LINE_CHECK("%-7.7s ucast %2u Mb/s mgmt %2u Mb/s "
"mcast %2u Mb/s maxretry %u",
modename[mode],
tp->ucastrate/2, tp->mgmtrate/2,
tp->mcastrate/2, tp->maxretry);
}
}
}
static void
printpolicy(int policy)
{
switch (policy) {
case IEEE80211_MACCMD_POLICY_OPEN:
printf("policy: open\n");
break;
case IEEE80211_MACCMD_POLICY_ALLOW:
printf("policy: allow\n");
break;
case IEEE80211_MACCMD_POLICY_DENY:
printf("policy: deny\n");
break;
case IEEE80211_MACCMD_POLICY_RADIUS:
printf("policy: radius\n");
break;
default:
printf("policy: unknown (%u)\n", policy);
break;
}
}
static void
list_mac(int s)
{
struct ieee80211req ireq;
struct ieee80211req_maclist *acllist;
int i, nacls, policy, len;
uint8_t *data;
char c;
(void) memset(&ireq, 0, sizeof(ireq));
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name)); /* XXX ?? */
ireq.i_type = IEEE80211_IOC_MACCMD;
ireq.i_val = IEEE80211_MACCMD_POLICY;
if (ioctl(s, SIOCG80211, &ireq) < 0) {
if (errno == EINVAL) {
printf("No acl policy loaded\n");
return;
}
err(1, "unable to get mac policy");
}
policy = ireq.i_val;
if (policy == IEEE80211_MACCMD_POLICY_OPEN) {
c = '*';
} else if (policy == IEEE80211_MACCMD_POLICY_ALLOW) {
c = '+';
} else if (policy == IEEE80211_MACCMD_POLICY_DENY) {
c = '-';
} else if (policy == IEEE80211_MACCMD_POLICY_RADIUS) {
c = 'r'; /* NB: should never have entries */
} else {
printf("policy: unknown (%u)\n", policy);
c = '?';
}
if (verbose || c == '?')
printpolicy(policy);
ireq.i_val = IEEE80211_MACCMD_LIST;
ireq.i_len = 0;
if (ioctl(s, SIOCG80211, &ireq) < 0)
err(1, "unable to get mac acl list size");
if (ireq.i_len == 0) { /* NB: no acls */
if (!(verbose || c == '?'))
printpolicy(policy);
return;
}
len = ireq.i_len;
data = malloc(len);
if (data == NULL)
err(1, "out of memory for acl list");
ireq.i_data = data;
if (ioctl(s, SIOCG80211, &ireq) < 0)
err(1, "unable to get mac acl list");
nacls = len / sizeof(*acllist);
acllist = (struct ieee80211req_maclist *) data;
for (i = 0; i < nacls; i++)
printf("%c%s\n", c, ether_ntoa(
(const struct ether_addr *) acllist[i].ml_macaddr));
free(data);
}
static void
print_regdomain(const struct ieee80211_regdomain *reg, int verb)
{
if ((reg->regdomain != 0 &&
reg->regdomain != reg->country) || verb) {
const struct regdomain *rd =
lib80211_regdomain_findbysku(getregdata(), reg->regdomain);
if (rd == NULL)
LINE_CHECK("regdomain %d", reg->regdomain);
else
LINE_CHECK("regdomain %s", rd->name);
}
if (reg->country != 0 || verb) {
const struct country *cc =
lib80211_country_findbycc(getregdata(), reg->country);
if (cc == NULL)
LINE_CHECK("country %d", reg->country);
else
LINE_CHECK("country %s", cc->isoname);
}
if (reg->location == 'I')
LINE_CHECK("indoor");
else if (reg->location == 'O')
LINE_CHECK("outdoor");
else if (verb)
LINE_CHECK("anywhere");
if (reg->ecm)
LINE_CHECK("ecm");
else if (verb)
LINE_CHECK("-ecm");
}
static void
list_regdomain(int s, int channelsalso)
{
getregdomain(s);
if (channelsalso) {
getchaninfo(s);
spacer = ':';
print_regdomain(&regdomain, 1);
LINE_BREAK();
print_channels(s, chaninfo, 1/*allchans*/, 1/*verbose*/);
} else
print_regdomain(&regdomain, verbose);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
static void
list_mesh(int s)
{
struct ieee80211req ireq;
struct ieee80211req_mesh_route routes[128];
struct ieee80211req_mesh_route *rt;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
(void) memset(&ireq, 0, sizeof(ireq));
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
ireq.i_type = IEEE80211_IOC_MESH_RTCMD;
ireq.i_val = IEEE80211_MESH_RTCMD_LIST;
ireq.i_data = &routes;
ireq.i_len = sizeof(routes);
if (ioctl(s, SIOCG80211, &ireq) < 0)
err(1, "unable to get the Mesh routing table");
printf("%-17.17s %-17.17s %4s %4s %4s %6s %s\n"
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
, "DEST"
, "NEXT HOP"
, "HOPS"
, "METRIC"
, "LIFETIME"
, "MSEQ"
, "FLAGS");
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
for (rt = &routes[0]; rt - &routes[0] < ireq.i_len / sizeof(*rt); rt++){
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf("%s ",
ether_ntoa((const struct ether_addr *)rt->imr_dest));
printf("%s %4u %4u %6u %6u %c%c\n",
ether_ntoa((const struct ether_addr *)rt->imr_nexthop),
rt->imr_nhops, rt->imr_metric, rt->imr_lifetime,
rt->imr_lastmseq,
(rt->imr_flags & IEEE80211_MESHRT_FLAGS_DISCOVER) ?
'D' :
(rt->imr_flags & IEEE80211_MESHRT_FLAGS_VALID) ?
'V' : '!',
(rt->imr_flags & IEEE80211_MESHRT_FLAGS_PROXY) ?
'P' :
(rt->imr_flags & IEEE80211_MESHRT_FLAGS_GATE) ?
'G' :' ');
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
}
}
static
DECL_CMD_FUNC(set80211list, arg, d)
{
#define iseq(a,b) (strncasecmp(a,b,sizeof(b)-1) == 0)
LINE_INIT('\t');
if (iseq(arg, "sta"))
list_stations(s);
else if (iseq(arg, "scan") || iseq(arg, "ap"))
list_scan(s);
else if (iseq(arg, "chan") || iseq(arg, "freq"))
list_channels(s, 1);
else if (iseq(arg, "active"))
list_channels(s, 0);
else if (iseq(arg, "keys"))
list_keys(s);
else if (iseq(arg, "caps"))
list_capabilities(s);
else if (iseq(arg, "wme") || iseq(arg, "wmm"))
list_wme(s);
else if (iseq(arg, "mac"))
list_mac(s);
else if (iseq(arg, "txpow"))
list_txpow(s);
else if (iseq(arg, "roam"))
list_roam(s);
else if (iseq(arg, "txparam") || iseq(arg, "txparm"))
list_txparams(s);
else if (iseq(arg, "regdomain"))
list_regdomain(s, 1);
else if (iseq(arg, "countries"))
list_countries();
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
else if (iseq(arg, "mesh"))
list_mesh(s);
else
errx(1, "Don't know how to list %s for %s", arg, name);
LINE_BREAK();
#undef iseq
}
static enum ieee80211_opmode
get80211opmode(int s)
{
struct ifmediareq ifmr;
(void) memset(&ifmr, 0, sizeof(ifmr));
(void) strncpy(ifmr.ifm_name, name, sizeof(ifmr.ifm_name));
if (ioctl(s, SIOCGIFMEDIA, (caddr_t)&ifmr) >= 0) {
if (ifmr.ifm_current & IFM_IEEE80211_ADHOC) {
if (ifmr.ifm_current & IFM_FLAG0)
return IEEE80211_M_AHDEMO;
else
return IEEE80211_M_IBSS;
}
if (ifmr.ifm_current & IFM_IEEE80211_HOSTAP)
return IEEE80211_M_HOSTAP;
if (ifmr.ifm_current & IFM_IEEE80211_IBSS)
return IEEE80211_M_IBSS;
if (ifmr.ifm_current & IFM_IEEE80211_MONITOR)
return IEEE80211_M_MONITOR;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (ifmr.ifm_current & IFM_IEEE80211_MBSS)
return IEEE80211_M_MBSS;
}
return IEEE80211_M_STA;
}
#if 0
static void
printcipher(int s, struct ieee80211req *ireq, int keylenop)
{
switch (ireq->i_val) {
case IEEE80211_CIPHER_WEP:
ireq->i_type = keylenop;
if (ioctl(s, SIOCG80211, ireq) != -1)
printf("WEP-%s",
ireq->i_len <= 5 ? "40" :
ireq->i_len <= 13 ? "104" : "128");
else
printf("WEP");
break;
case IEEE80211_CIPHER_TKIP:
printf("TKIP");
break;
case IEEE80211_CIPHER_AES_OCB:
printf("AES-OCB");
break;
case IEEE80211_CIPHER_AES_CCM:
printf("AES-CCM");
break;
case IEEE80211_CIPHER_CKIP:
printf("CKIP");
break;
case IEEE80211_CIPHER_NONE:
printf("NONE");
break;
default:
printf("UNKNOWN (0x%x)", ireq->i_val);
break;
}
}
#endif
static void
printkey(const struct ieee80211req_key *ik)
{
static const uint8_t zerodata[IEEE80211_KEYBUF_SIZE];
int keylen = ik->ik_keylen;
int printcontents;
printcontents = printkeys &&
(memcmp(ik->ik_keydata, zerodata, keylen) != 0 || verbose);
if (printcontents)
LINE_BREAK();
switch (ik->ik_type) {
case IEEE80211_CIPHER_WEP:
/* compatibility */
LINE_CHECK("wepkey %u:%s", ik->ik_keyix+1,
keylen <= 5 ? "40-bit" :
keylen <= 13 ? "104-bit" : "128-bit");
break;
case IEEE80211_CIPHER_TKIP:
if (keylen > 128/8)
keylen -= 128/8; /* ignore MIC for now */
LINE_CHECK("TKIP %u:%u-bit", ik->ik_keyix+1, 8*keylen);
break;
case IEEE80211_CIPHER_AES_OCB:
LINE_CHECK("AES-OCB %u:%u-bit", ik->ik_keyix+1, 8*keylen);
break;
case IEEE80211_CIPHER_AES_CCM:
LINE_CHECK("AES-CCM %u:%u-bit", ik->ik_keyix+1, 8*keylen);
break;
case IEEE80211_CIPHER_CKIP:
LINE_CHECK("CKIP %u:%u-bit", ik->ik_keyix+1, 8*keylen);
break;
case IEEE80211_CIPHER_NONE:
LINE_CHECK("NULL %u:%u-bit", ik->ik_keyix+1, 8*keylen);
break;
default:
LINE_CHECK("UNKNOWN (0x%x) %u:%u-bit",
ik->ik_type, ik->ik_keyix+1, 8*keylen);
break;
}
if (printcontents) {
int i;
printf(" <");
for (i = 0; i < keylen; i++)
printf("%02x", ik->ik_keydata[i]);
printf(">");
if (ik->ik_type != IEEE80211_CIPHER_WEP &&
(ik->ik_keyrsc != 0 || verbose))
printf(" rsc %ju", (uintmax_t)ik->ik_keyrsc);
if (ik->ik_type != IEEE80211_CIPHER_WEP &&
(ik->ik_keytsc != 0 || verbose))
printf(" tsc %ju", (uintmax_t)ik->ik_keytsc);
if (ik->ik_flags != 0 && verbose) {
const char *sep = " ";
if (ik->ik_flags & IEEE80211_KEY_XMIT)
printf("%stx", sep), sep = "+";
if (ik->ik_flags & IEEE80211_KEY_RECV)
printf("%srx", sep), sep = "+";
if (ik->ik_flags & IEEE80211_KEY_DEFAULT)
printf("%sdef", sep), sep = "+";
}
LINE_BREAK();
}
}
static void
printrate(const char *tag, int v, int defrate, int defmcs)
{
if ((v & IEEE80211_RATE_MCS) == 0) {
if (v != defrate) {
if (v & 1)
LINE_CHECK("%s %d.5", tag, v/2);
else
LINE_CHECK("%s %d", tag, v/2);
}
} else {
if (v != defmcs)
LINE_CHECK("%s %d", tag, v &~ 0x80);
}
}
static int
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
getid(int s, int ix, void *data, size_t len, int *plen, int mesh)
{
struct ieee80211req ireq;
(void) memset(&ireq, 0, sizeof(ireq));
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
ireq.i_type = (!mesh) ? IEEE80211_IOC_SSID : IEEE80211_IOC_MESH_ID;
ireq.i_val = ix;
ireq.i_data = data;
ireq.i_len = len;
if (ioctl(s, SIOCG80211, &ireq) < 0)
return -1;
*plen = ireq.i_len;
return 0;
}
static void
ieee80211_status(int s)
{
static const uint8_t zerobssid[IEEE80211_ADDR_LEN];
enum ieee80211_opmode opmode = get80211opmode(s);
int i, num, wpa, wme, bgscan, bgscaninterval, val, len, wepmode;
uint8_t data[32];
const struct ieee80211_channel *c;
const struct ieee80211_roamparam *rp;
const struct ieee80211_txparam *tp;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (getid(s, -1, data, sizeof(data), &len, 0) < 0) {
2005-08-03 20:57:33 +00:00
/* If we can't get the SSID, this isn't an 802.11 device. */
return;
}
/*
* Invalidate cached state so printing status for multiple
* if's doesn't reuse the first interfaces' cached state.
*/
gotcurchan = 0;
gotroam = 0;
gottxparams = 0;
gothtconf = 0;
gotregdomain = 0;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
printf("\t");
if (opmode == IEEE80211_M_MBSS) {
printf("meshid ");
getid(s, 0, data, sizeof(data), &len, 1);
print_string(data, len);
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else {
if (get80211val(s, IEEE80211_IOC_NUMSSIDS, &num) < 0)
num = 0;
printf("ssid ");
if (num > 1) {
for (i = 0; i < num; i++) {
if (getid(s, i, data, sizeof(data), &len, 0) >= 0 && len > 0) {
printf(" %d:", i + 1);
print_string(data, len);
}
}
} else
print_string(data, len);
}
c = getcurchan(s);
if (c->ic_freq != IEEE80211_CHAN_ANY) {
char buf[14];
printf(" channel %d (%u MHz%s)", c->ic_ieee, c->ic_freq,
get_chaninfo(c, 1, buf, sizeof(buf)));
} else if (verbose)
printf(" channel UNDEF");
if (get80211(s, IEEE80211_IOC_BSSID, data, IEEE80211_ADDR_LEN) >= 0 &&
(memcmp(data, zerobssid, sizeof(zerobssid)) != 0 || verbose))
printf(" bssid %s", ether_ntoa((struct ether_addr *)data));
if (get80211len(s, IEEE80211_IOC_STATIONNAME, data, sizeof(data), &len) != -1) {
printf("\n\tstationname ");
print_string(data, len);
}
spacer = ' '; /* force first break */
LINE_BREAK();
list_regdomain(s, 0);
wpa = 0;
if (get80211val(s, IEEE80211_IOC_AUTHMODE, &val) != -1) {
switch (val) {
case IEEE80211_AUTH_NONE:
LINE_CHECK("authmode NONE");
break;
case IEEE80211_AUTH_OPEN:
LINE_CHECK("authmode OPEN");
break;
case IEEE80211_AUTH_SHARED:
LINE_CHECK("authmode SHARED");
break;
case IEEE80211_AUTH_8021X:
LINE_CHECK("authmode 802.1x");
break;
case IEEE80211_AUTH_WPA:
if (get80211val(s, IEEE80211_IOC_WPA, &wpa) < 0)
wpa = 1; /* default to WPA1 */
switch (wpa) {
case 2:
LINE_CHECK("authmode WPA2/802.11i");
break;
case 3:
LINE_CHECK("authmode WPA1+WPA2/802.11i");
break;
default:
LINE_CHECK("authmode WPA");
break;
}
break;
case IEEE80211_AUTH_AUTO:
LINE_CHECK("authmode AUTO");
break;
default:
LINE_CHECK("authmode UNKNOWN (0x%x)", val);
break;
}
}
if (wpa || verbose) {
if (get80211val(s, IEEE80211_IOC_WPS, &val) != -1) {
if (val)
LINE_CHECK("wps");
else if (verbose)
LINE_CHECK("-wps");
}
if (get80211val(s, IEEE80211_IOC_TSN, &val) != -1) {
if (val)
LINE_CHECK("tsn");
else if (verbose)
LINE_CHECK("-tsn");
}
if (ioctl(s, IEEE80211_IOC_COUNTERMEASURES, &val) != -1) {
if (val)
LINE_CHECK("countermeasures");
else if (verbose)
LINE_CHECK("-countermeasures");
}
#if 0
/* XXX not interesting with WPA done in user space */
ireq.i_type = IEEE80211_IOC_KEYMGTALGS;
if (ioctl(s, SIOCG80211, &ireq) != -1) {
}
ireq.i_type = IEEE80211_IOC_MCASTCIPHER;
if (ioctl(s, SIOCG80211, &ireq) != -1) {
LINE_CHECK("mcastcipher ");
printcipher(s, &ireq, IEEE80211_IOC_MCASTKEYLEN);
spacer = ' ';
}
ireq.i_type = IEEE80211_IOC_UCASTCIPHER;
if (ioctl(s, SIOCG80211, &ireq) != -1) {
LINE_CHECK("ucastcipher ");
printcipher(s, &ireq, IEEE80211_IOC_UCASTKEYLEN);
}
if (wpa & 2) {
ireq.i_type = IEEE80211_IOC_RSNCAPS;
if (ioctl(s, SIOCG80211, &ireq) != -1) {
LINE_CHECK("RSN caps 0x%x", ireq.i_val);
spacer = ' ';
}
}
ireq.i_type = IEEE80211_IOC_UCASTCIPHERS;
if (ioctl(s, SIOCG80211, &ireq) != -1) {
}
#endif
}
if (get80211val(s, IEEE80211_IOC_WEP, &wepmode) != -1 &&
wepmode != IEEE80211_WEP_NOSUP) {
switch (wepmode) {
case IEEE80211_WEP_OFF:
LINE_CHECK("privacy OFF");
break;
case IEEE80211_WEP_ON:
LINE_CHECK("privacy ON");
break;
case IEEE80211_WEP_MIXED:
LINE_CHECK("privacy MIXED");
break;
default:
LINE_CHECK("privacy UNKNOWN (0x%x)", wepmode);
break;
}
/*
* If we get here then we've got WEP support so we need
* to print WEP status.
*/
if (get80211val(s, IEEE80211_IOC_WEPTXKEY, &val) < 0) {
warn("WEP support, but no tx key!");
goto end;
}
if (val != -1)
LINE_CHECK("deftxkey %d", val+1);
else if (wepmode != IEEE80211_WEP_OFF || verbose)
LINE_CHECK("deftxkey UNDEF");
if (get80211val(s, IEEE80211_IOC_NUMWEPKEYS, &num) < 0) {
warn("WEP support, but no NUMWEPKEYS support!");
goto end;
}
for (i = 0; i < num; i++) {
struct ieee80211req_key ik;
memset(&ik, 0, sizeof(ik));
ik.ik_keyix = i;
if (get80211(s, IEEE80211_IOC_WPAKEY, &ik, sizeof(ik)) < 0) {
warn("WEP support, but can get keys!");
goto end;
}
if (ik.ik_keylen != 0) {
if (verbose)
LINE_BREAK();
printkey(&ik);
}
}
end:
;
}
if (get80211val(s, IEEE80211_IOC_POWERSAVE, &val) != -1 &&
val != IEEE80211_POWERSAVE_NOSUP ) {
if (val != IEEE80211_POWERSAVE_OFF || verbose) {
switch (val) {
case IEEE80211_POWERSAVE_OFF:
LINE_CHECK("powersavemode OFF");
break;
case IEEE80211_POWERSAVE_CAM:
LINE_CHECK("powersavemode CAM");
break;
case IEEE80211_POWERSAVE_PSP:
LINE_CHECK("powersavemode PSP");
break;
case IEEE80211_POWERSAVE_PSP_CAM:
LINE_CHECK("powersavemode PSP-CAM");
break;
}
if (get80211val(s, IEEE80211_IOC_POWERSAVESLEEP, &val) != -1)
LINE_CHECK("powersavesleep %d", val);
}
}
if (get80211val(s, IEEE80211_IOC_TXPOWER, &val) != -1) {
if (val & 1)
LINE_CHECK("txpower %d.5", val/2);
else
LINE_CHECK("txpower %d", val/2);
}
if (verbose) {
if (get80211val(s, IEEE80211_IOC_TXPOWMAX, &val) != -1)
LINE_CHECK("txpowmax %.1f", val/2.);
}
if (get80211val(s, IEEE80211_IOC_DOTD, &val) != -1) {
if (val)
LINE_CHECK("dotd");
else if (verbose)
LINE_CHECK("-dotd");
}
if (get80211val(s, IEEE80211_IOC_RTSTHRESHOLD, &val) != -1) {
if (val != IEEE80211_RTS_MAX || verbose)
LINE_CHECK("rtsthreshold %d", val);
}
if (get80211val(s, IEEE80211_IOC_FRAGTHRESHOLD, &val) != -1) {
if (val != IEEE80211_FRAG_MAX || verbose)
LINE_CHECK("fragthreshold %d", val);
}
if (opmode == IEEE80211_M_STA || verbose) {
if (get80211val(s, IEEE80211_IOC_BMISSTHRESHOLD, &val) != -1) {
if (val != IEEE80211_HWBMISS_MAX || verbose)
LINE_CHECK("bmiss %d", val);
}
}
if (!verbose) {
gettxparams(s);
tp = &txparams.params[chan2mode(c)];
printrate("ucastrate", tp->ucastrate,
IEEE80211_FIXED_RATE_NONE, IEEE80211_FIXED_RATE_NONE);
printrate("mcastrate", tp->mcastrate, 2*1,
IEEE80211_RATE_MCS|0);
printrate("mgmtrate", tp->mgmtrate, 2*1,
IEEE80211_RATE_MCS|0);
if (tp->maxretry != 6) /* XXX */
LINE_CHECK("maxretry %d", tp->maxretry);
} else {
LINE_BREAK();
list_txparams(s);
}
bgscaninterval = -1;
(void) get80211val(s, IEEE80211_IOC_BGSCAN_INTERVAL, &bgscaninterval);
if (get80211val(s, IEEE80211_IOC_SCANVALID, &val) != -1) {
if (val != bgscaninterval || verbose)
LINE_CHECK("scanvalid %u", val);
}
bgscan = 0;
if (get80211val(s, IEEE80211_IOC_BGSCAN, &bgscan) != -1) {
if (bgscan)
LINE_CHECK("bgscan");
else if (verbose)
LINE_CHECK("-bgscan");
}
if (bgscan || verbose) {
if (bgscaninterval != -1)
LINE_CHECK("bgscanintvl %u", bgscaninterval);
if (get80211val(s, IEEE80211_IOC_BGSCAN_IDLE, &val) != -1)
LINE_CHECK("bgscanidle %u", val);
if (!verbose) {
getroam(s);
rp = &roamparams.params[chan2mode(c)];
if (rp->rssi & 1)
LINE_CHECK("roam:rssi %u.5", rp->rssi/2);
else
LINE_CHECK("roam:rssi %u", rp->rssi/2);
LINE_CHECK("roam:rate %u", rp->rate/2);
} else {
LINE_BREAK();
list_roam(s);
LINE_BREAK();
}
}
if (IEEE80211_IS_CHAN_ANYG(c) || verbose) {
if (get80211val(s, IEEE80211_IOC_PUREG, &val) != -1) {
if (val)
LINE_CHECK("pureg");
else if (verbose)
LINE_CHECK("-pureg");
}
if (get80211val(s, IEEE80211_IOC_PROTMODE, &val) != -1) {
switch (val) {
case IEEE80211_PROTMODE_OFF:
LINE_CHECK("protmode OFF");
break;
case IEEE80211_PROTMODE_CTS:
LINE_CHECK("protmode CTS");
break;
case IEEE80211_PROTMODE_RTSCTS:
LINE_CHECK("protmode RTSCTS");
break;
default:
LINE_CHECK("protmode UNKNOWN (0x%x)", val);
break;
}
}
}
if (IEEE80211_IS_CHAN_HT(c) || verbose) {
gethtconf(s);
switch (htconf & 3) {
case 0:
case 2:
LINE_CHECK("-ht");
break;
case 1:
LINE_CHECK("ht20");
break;
case 3:
if (verbose)
LINE_CHECK("ht");
break;
}
if (get80211val(s, IEEE80211_IOC_HTCOMPAT, &val) != -1) {
if (!val)
LINE_CHECK("-htcompat");
else if (verbose)
LINE_CHECK("htcompat");
}
if (get80211val(s, IEEE80211_IOC_AMPDU, &val) != -1) {
switch (val) {
case 0:
LINE_CHECK("-ampdu");
break;
case 1:
LINE_CHECK("ampdutx -ampdurx");
break;
case 2:
LINE_CHECK("-ampdutx ampdurx");
break;
case 3:
if (verbose)
LINE_CHECK("ampdu");
break;
}
}
if (get80211val(s, IEEE80211_IOC_AMPDU_LIMIT, &val) != -1) {
switch (val) {
case IEEE80211_HTCAP_MAXRXAMPDU_8K:
LINE_CHECK("ampdulimit 8k");
break;
case IEEE80211_HTCAP_MAXRXAMPDU_16K:
LINE_CHECK("ampdulimit 16k");
break;
case IEEE80211_HTCAP_MAXRXAMPDU_32K:
LINE_CHECK("ampdulimit 32k");
break;
case IEEE80211_HTCAP_MAXRXAMPDU_64K:
LINE_CHECK("ampdulimit 64k");
break;
}
}
if (get80211val(s, IEEE80211_IOC_AMPDU_DENSITY, &val) != -1) {
switch (val) {
case IEEE80211_HTCAP_MPDUDENSITY_NA:
if (verbose)
LINE_CHECK("ampdudensity NA");
break;
case IEEE80211_HTCAP_MPDUDENSITY_025:
LINE_CHECK("ampdudensity .25");
break;
case IEEE80211_HTCAP_MPDUDENSITY_05:
LINE_CHECK("ampdudensity .5");
break;
case IEEE80211_HTCAP_MPDUDENSITY_1:
LINE_CHECK("ampdudensity 1");
break;
case IEEE80211_HTCAP_MPDUDENSITY_2:
LINE_CHECK("ampdudensity 2");
break;
case IEEE80211_HTCAP_MPDUDENSITY_4:
LINE_CHECK("ampdudensity 4");
break;
case IEEE80211_HTCAP_MPDUDENSITY_8:
LINE_CHECK("ampdudensity 8");
break;
case IEEE80211_HTCAP_MPDUDENSITY_16:
LINE_CHECK("ampdudensity 16");
break;
}
}
if (get80211val(s, IEEE80211_IOC_AMSDU, &val) != -1) {
switch (val) {
case 0:
LINE_CHECK("-amsdu");
break;
case 1:
LINE_CHECK("amsdutx -amsdurx");
break;
case 2:
LINE_CHECK("-amsdutx amsdurx");
break;
case 3:
if (verbose)
LINE_CHECK("amsdu");
break;
}
}
/* XXX amsdu limit */
if (get80211val(s, IEEE80211_IOC_SHORTGI, &val) != -1) {
if (val)
LINE_CHECK("shortgi");
else if (verbose)
LINE_CHECK("-shortgi");
}
if (get80211val(s, IEEE80211_IOC_HTPROTMODE, &val) != -1) {
if (val == IEEE80211_PROTMODE_OFF)
LINE_CHECK("htprotmode OFF");
else if (val != IEEE80211_PROTMODE_RTSCTS)
LINE_CHECK("htprotmode UNKNOWN (0x%x)", val);
else if (verbose)
LINE_CHECK("htprotmode RTSCTS");
}
if (get80211val(s, IEEE80211_IOC_PUREN, &val) != -1) {
if (val)
LINE_CHECK("puren");
else if (verbose)
LINE_CHECK("-puren");
}
if (get80211val(s, IEEE80211_IOC_SMPS, &val) != -1) {
if (val == IEEE80211_HTCAP_SMPS_DYNAMIC)
LINE_CHECK("smpsdyn");
else if (val == IEEE80211_HTCAP_SMPS_ENA)
LINE_CHECK("smps");
else if (verbose)
LINE_CHECK("-smps");
}
if (get80211val(s, IEEE80211_IOC_RIFS, &val) != -1) {
if (val)
LINE_CHECK("rifs");
else if (verbose)
LINE_CHECK("-rifs");
}
}
if (get80211val(s, IEEE80211_IOC_WME, &wme) != -1) {
if (wme)
LINE_CHECK("wme");
else if (verbose)
LINE_CHECK("-wme");
} else
wme = 0;
if (get80211val(s, IEEE80211_IOC_BURST, &val) != -1) {
if (val)
LINE_CHECK("burst");
2005-12-14 19:44:39 +00:00
else if (verbose)
LINE_CHECK("-burst");
2005-12-14 19:44:39 +00:00
}
if (get80211val(s, IEEE80211_IOC_FF, &val) != -1) {
if (val)
LINE_CHECK("ff");
else if (verbose)
LINE_CHECK("-ff");
}
if (get80211val(s, IEEE80211_IOC_TURBOP, &val) != -1) {
if (val)
LINE_CHECK("dturbo");
else if (verbose)
LINE_CHECK("-dturbo");
}
if (get80211val(s, IEEE80211_IOC_DWDS, &val) != -1) {
if (val)
LINE_CHECK("dwds");
else if (verbose)
LINE_CHECK("-dwds");
}
if (opmode == IEEE80211_M_HOSTAP) {
if (get80211val(s, IEEE80211_IOC_HIDESSID, &val) != -1) {
if (val)
LINE_CHECK("hidessid");
else if (verbose)
LINE_CHECK("-hidessid");
}
if (get80211val(s, IEEE80211_IOC_APBRIDGE, &val) != -1) {
if (!val)
LINE_CHECK("-apbridge");
else if (verbose)
LINE_CHECK("apbridge");
}
if (get80211val(s, IEEE80211_IOC_DTIM_PERIOD, &val) != -1)
LINE_CHECK("dtimperiod %u", val);
if (get80211val(s, IEEE80211_IOC_DOTH, &val) != -1) {
if (!val)
LINE_CHECK("-doth");
else if (verbose)
LINE_CHECK("doth");
}
if (get80211val(s, IEEE80211_IOC_DFS, &val) != -1) {
if (!val)
LINE_CHECK("-dfs");
else if (verbose)
LINE_CHECK("dfs");
}
if (get80211val(s, IEEE80211_IOC_INACTIVITY, &val) != -1) {
if (!val)
LINE_CHECK("-inact");
else if (verbose)
LINE_CHECK("inact");
}
} else {
if (get80211val(s, IEEE80211_IOC_ROAMING, &val) != -1) {
if (val != IEEE80211_ROAMING_AUTO || verbose) {
switch (val) {
case IEEE80211_ROAMING_DEVICE:
LINE_CHECK("roaming DEVICE");
break;
case IEEE80211_ROAMING_AUTO:
LINE_CHECK("roaming AUTO");
break;
case IEEE80211_ROAMING_MANUAL:
LINE_CHECK("roaming MANUAL");
break;
default:
LINE_CHECK("roaming UNKNOWN (0x%x)",
val);
break;
}
}
}
}
if (opmode == IEEE80211_M_AHDEMO) {
if (get80211val(s, IEEE80211_IOC_TDMA_SLOT, &val) != -1)
LINE_CHECK("tdmaslot %u", val);
if (get80211val(s, IEEE80211_IOC_TDMA_SLOTCNT, &val) != -1)
LINE_CHECK("tdmaslotcnt %u", val);
if (get80211val(s, IEEE80211_IOC_TDMA_SLOTLEN, &val) != -1)
LINE_CHECK("tdmaslotlen %u", val);
if (get80211val(s, IEEE80211_IOC_TDMA_BINTERVAL, &val) != -1)
LINE_CHECK("tdmabintval %u", val);
} else if (get80211val(s, IEEE80211_IOC_BEACON_INTERVAL, &val) != -1) {
/* XXX default define not visible */
if (val != 100 || verbose)
LINE_CHECK("bintval %u", val);
}
if (wme && verbose) {
LINE_BREAK();
list_wme(s);
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (opmode == IEEE80211_M_MBSS) {
if (get80211val(s, IEEE80211_IOC_MESH_TTL, &val) != -1) {
LINE_CHECK("meshttl %u", val);
}
if (get80211val(s, IEEE80211_IOC_MESH_AP, &val) != -1) {
if (val)
LINE_CHECK("meshpeering");
else
LINE_CHECK("-meshpeering");
}
if (get80211val(s, IEEE80211_IOC_MESH_FWRD, &val) != -1) {
if (val)
LINE_CHECK("meshforward");
else
LINE_CHECK("-meshforward");
}
if (get80211val(s, IEEE80211_IOC_MESH_GATE, &val) != -1) {
if (val)
LINE_CHECK("meshgate");
else
LINE_CHECK("-meshgate");
}
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
if (get80211len(s, IEEE80211_IOC_MESH_PR_METRIC, data, 12,
&len) != -1) {
data[len] = '\0';
LINE_CHECK("meshmetric %s", data);
}
if (get80211len(s, IEEE80211_IOC_MESH_PR_PATH, data, 12,
&len) != -1) {
data[len] = '\0';
LINE_CHECK("meshpath %s", data);
}
if (get80211val(s, IEEE80211_IOC_HWMP_ROOTMODE, &val) != -1) {
switch (val) {
case IEEE80211_HWMP_ROOTMODE_DISABLED:
LINE_CHECK("hwmprootmode DISABLED");
break;
case IEEE80211_HWMP_ROOTMODE_NORMAL:
LINE_CHECK("hwmprootmode NORMAL");
break;
case IEEE80211_HWMP_ROOTMODE_PROACTIVE:
LINE_CHECK("hwmprootmode PROACTIVE");
break;
case IEEE80211_HWMP_ROOTMODE_RANN:
LINE_CHECK("hwmprootmode RANN");
break;
default:
LINE_CHECK("hwmprootmode UNKNOWN(%d)", val);
break;
}
}
if (get80211val(s, IEEE80211_IOC_HWMP_MAXHOPS, &val) != -1) {
LINE_CHECK("hwmpmaxhops %u", val);
}
}
LINE_BREAK();
}
static int
get80211(int s, int type, void *data, int len)
{
return (lib80211_get80211(s, name, type, data, len));
}
static int
get80211len(int s, int type, void *data, int len, int *plen)
{
return (lib80211_get80211len(s, name, type, data, len, plen));
}
static int
get80211val(int s, int type, int *val)
{
return (lib80211_get80211val(s, name, type, val));
}
static void
set80211(int s, int type, int val, int len, void *data)
{
int ret;
ret = lib80211_set80211(s, name, type, val, len, data);
if (ret < 0)
err(1, "SIOCS80211");
}
static const char *
get_string(const char *val, const char *sep, u_int8_t *buf, int *lenp)
{
int len;
int hexstr;
u_int8_t *p;
len = *lenp;
p = buf;
hexstr = (val[0] == '0' && tolower((u_char)val[1]) == 'x');
if (hexstr)
val += 2;
for (;;) {
if (*val == '\0')
break;
if (sep != NULL && strchr(sep, *val) != NULL) {
val++;
break;
}
if (hexstr) {
if (!isxdigit((u_char)val[0])) {
warnx("bad hexadecimal digits");
return NULL;
}
if (!isxdigit((u_char)val[1])) {
warnx("odd count hexadecimal digits");
return NULL;
}
}
if (p >= buf + len) {
if (hexstr)
warnx("hexadecimal digits too long");
else
warnx("string too long");
return NULL;
}
if (hexstr) {
#define tohex(x) (isdigit(x) ? (x) - '0' : tolower(x) - 'a' + 10)
*p++ = (tohex((u_char)val[0]) << 4) |
tohex((u_char)val[1]);
#undef tohex
val += 2;
} else
*p++ = *val++;
}
len = p - buf;
/* The string "-" is treated as the empty string. */
if (!hexstr && len == 1 && buf[0] == '-') {
len = 0;
memset(buf, 0, *lenp);
} else if (len < *lenp)
memset(p, 0, *lenp - len);
*lenp = len;
return val;
}
static void
print_string(const u_int8_t *buf, int len)
{
int i;
int hasspc;
i = 0;
hasspc = 0;
for (; i < len; i++) {
if (!isprint(buf[i]) && buf[i] != '\0')
break;
if (isspace(buf[i]))
hasspc++;
}
if (i == len) {
if (hasspc || len == 0 || buf[0] == '\0')
printf("\"%.*s\"", len, buf);
else
printf("%.*s", len, buf);
} else {
printf("0x");
for (i = 0; i < len; i++)
printf("%02x", buf[i]);
}
}
/*
* Virtual AP cloning support.
*/
static struct ieee80211_clone_params params = {
.icp_opmode = IEEE80211_M_STA, /* default to station mode */
};
static void
wlan_create(int s, struct ifreq *ifr)
{
static const uint8_t zerobssid[IEEE80211_ADDR_LEN];
if (params.icp_parent[0] == '\0')
errx(1, "must specify a parent device (wlandev) when creating "
"a wlan device");
if (params.icp_opmode == IEEE80211_M_WDS &&
memcmp(params.icp_bssid, zerobssid, sizeof(zerobssid)) == 0)
errx(1, "no bssid specified for WDS (use wlanbssid)");
ifr->ifr_data = (caddr_t) &params;
if (ioctl(s, SIOCIFCREATE2, ifr) < 0)
err(1, "SIOCIFCREATE2");
}
static
DECL_CMD_FUNC(set80211clone_wlandev, arg, d)
{
strlcpy(params.icp_parent, arg, IFNAMSIZ);
}
static
DECL_CMD_FUNC(set80211clone_wlanbssid, arg, d)
{
const struct ether_addr *ea;
ea = ether_aton(arg);
if (ea == NULL)
errx(1, "%s: cannot parse bssid", arg);
memcpy(params.icp_bssid, ea->octet, IEEE80211_ADDR_LEN);
}
static
DECL_CMD_FUNC(set80211clone_wlanaddr, arg, d)
{
const struct ether_addr *ea;
ea = ether_aton(arg);
if (ea == NULL)
2010-04-28 10:57:27 +00:00
errx(1, "%s: cannot parse address", arg);
memcpy(params.icp_macaddr, ea->octet, IEEE80211_ADDR_LEN);
params.icp_flags |= IEEE80211_CLONE_MACADDR;
}
static
DECL_CMD_FUNC(set80211clone_wlanmode, arg, d)
{
#define iseq(a,b) (strncasecmp(a,b,sizeof(b)-1) == 0)
if (iseq(arg, "sta"))
params.icp_opmode = IEEE80211_M_STA;
else if (iseq(arg, "ahdemo") || iseq(arg, "adhoc-demo"))
params.icp_opmode = IEEE80211_M_AHDEMO;
else if (iseq(arg, "ibss") || iseq(arg, "adhoc"))
params.icp_opmode = IEEE80211_M_IBSS;
else if (iseq(arg, "ap") || iseq(arg, "host"))
params.icp_opmode = IEEE80211_M_HOSTAP;
else if (iseq(arg, "wds"))
params.icp_opmode = IEEE80211_M_WDS;
else if (iseq(arg, "monitor"))
params.icp_opmode = IEEE80211_M_MONITOR;
else if (iseq(arg, "tdma")) {
params.icp_opmode = IEEE80211_M_AHDEMO;
params.icp_flags |= IEEE80211_CLONE_TDMA;
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
} else if (iseq(arg, "mesh") || iseq(arg, "mp")) /* mesh point */
params.icp_opmode = IEEE80211_M_MBSS;
else
errx(1, "Don't know to create %s for %s", arg, name);
#undef iseq
}
static void
set80211clone_beacons(const char *val, int d, int s, const struct afswtch *rafp)
{
/* NB: inverted sense */
if (d)
params.icp_flags &= ~IEEE80211_CLONE_NOBEACONS;
else
params.icp_flags |= IEEE80211_CLONE_NOBEACONS;
}
static void
set80211clone_bssid(const char *val, int d, int s, const struct afswtch *rafp)
{
if (d)
params.icp_flags |= IEEE80211_CLONE_BSSID;
else
params.icp_flags &= ~IEEE80211_CLONE_BSSID;
}
static void
set80211clone_wdslegacy(const char *val, int d, int s, const struct afswtch *rafp)
{
if (d)
params.icp_flags |= IEEE80211_CLONE_WDSLEGACY;
else
params.icp_flags &= ~IEEE80211_CLONE_WDSLEGACY;
}
static struct cmd ieee80211_cmds[] = {
DEF_CMD_ARG("ssid", set80211ssid),
DEF_CMD_ARG("nwid", set80211ssid),
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
DEF_CMD_ARG("meshid", set80211meshid),
DEF_CMD_ARG("stationname", set80211stationname),
DEF_CMD_ARG("station", set80211stationname), /* BSD/OS */
DEF_CMD_ARG("channel", set80211channel),
DEF_CMD_ARG("authmode", set80211authmode),
DEF_CMD_ARG("powersavemode", set80211powersavemode),
DEF_CMD("powersave", 1, set80211powersave),
DEF_CMD("-powersave", 0, set80211powersave),
DEF_CMD_ARG("powersavesleep", set80211powersavesleep),
DEF_CMD_ARG("wepmode", set80211wepmode),
DEF_CMD("wep", 1, set80211wep),
DEF_CMD("-wep", 0, set80211wep),
DEF_CMD_ARG("deftxkey", set80211weptxkey),
DEF_CMD_ARG("weptxkey", set80211weptxkey),
DEF_CMD_ARG("wepkey", set80211wepkey),
DEF_CMD_ARG("nwkey", set80211nwkey), /* NetBSD */
DEF_CMD("-nwkey", 0, set80211wep), /* NetBSD */
DEF_CMD_ARG("rtsthreshold", set80211rtsthreshold),
DEF_CMD_ARG("protmode", set80211protmode),
DEF_CMD_ARG("txpower", set80211txpower),
DEF_CMD_ARG("roaming", set80211roaming),
DEF_CMD("wme", 1, set80211wme),
DEF_CMD("-wme", 0, set80211wme),
DEF_CMD("wmm", 1, set80211wme),
DEF_CMD("-wmm", 0, set80211wme),
DEF_CMD("hidessid", 1, set80211hidessid),
DEF_CMD("-hidessid", 0, set80211hidessid),
DEF_CMD("apbridge", 1, set80211apbridge),
DEF_CMD("-apbridge", 0, set80211apbridge),
DEF_CMD_ARG("chanlist", set80211chanlist),
DEF_CMD_ARG("bssid", set80211bssid),
DEF_CMD_ARG("ap", set80211bssid),
DEF_CMD("scan", 0, set80211scan),
DEF_CMD_ARG("list", set80211list),
DEF_CMD_ARG2("cwmin", set80211cwmin),
DEF_CMD_ARG2("cwmax", set80211cwmax),
DEF_CMD_ARG2("aifs", set80211aifs),
DEF_CMD_ARG2("txoplimit", set80211txoplimit),
DEF_CMD_ARG("acm", set80211acm),
DEF_CMD_ARG("-acm", set80211noacm),
DEF_CMD_ARG("ack", set80211ackpolicy),
DEF_CMD_ARG("-ack", set80211noackpolicy),
DEF_CMD_ARG2("bss:cwmin", set80211bsscwmin),
DEF_CMD_ARG2("bss:cwmax", set80211bsscwmax),
DEF_CMD_ARG2("bss:aifs", set80211bssaifs),
DEF_CMD_ARG2("bss:txoplimit", set80211bsstxoplimit),
DEF_CMD_ARG("dtimperiod", set80211dtimperiod),
DEF_CMD_ARG("bintval", set80211bintval),
DEF_CMD("mac:open", IEEE80211_MACCMD_POLICY_OPEN, set80211maccmd),
DEF_CMD("mac:allow", IEEE80211_MACCMD_POLICY_ALLOW, set80211maccmd),
DEF_CMD("mac:deny", IEEE80211_MACCMD_POLICY_DENY, set80211maccmd),
DEF_CMD("mac:radius", IEEE80211_MACCMD_POLICY_RADIUS, set80211maccmd),
DEF_CMD("mac:flush", IEEE80211_MACCMD_FLUSH, set80211maccmd),
DEF_CMD("mac:detach", IEEE80211_MACCMD_DETACH, set80211maccmd),
DEF_CMD_ARG("mac:add", set80211addmac),
DEF_CMD_ARG("mac:del", set80211delmac),
DEF_CMD_ARG("mac:kick", set80211kickmac),
DEF_CMD("pureg", 1, set80211pureg),
DEF_CMD("-pureg", 0, set80211pureg),
DEF_CMD("ff", 1, set80211fastframes),
DEF_CMD("-ff", 0, set80211fastframes),
DEF_CMD("dturbo", 1, set80211dturbo),
DEF_CMD("-dturbo", 0, set80211dturbo),
DEF_CMD("bgscan", 1, set80211bgscan),
DEF_CMD("-bgscan", 0, set80211bgscan),
DEF_CMD_ARG("bgscanidle", set80211bgscanidle),
DEF_CMD_ARG("bgscanintvl", set80211bgscanintvl),
DEF_CMD_ARG("scanvalid", set80211scanvalid),
DEF_CMD("quiet", 1, set80211quiet),
DEF_CMD("-quiet", 0, set80211quiet),
DEF_CMD_ARG("quiet_count", set80211quietcount),
DEF_CMD_ARG("quiet_period", set80211quietperiod),
DEF_CMD_ARG("quiet_dur", set80211quietduration),
DEF_CMD_ARG("quiet_offset", set80211quietoffset),
DEF_CMD_ARG("roam:rssi", set80211roamrssi),
DEF_CMD_ARG("roam:rate", set80211roamrate),
DEF_CMD_ARG("mcastrate", set80211mcastrate),
DEF_CMD_ARG("ucastrate", set80211ucastrate),
DEF_CMD_ARG("mgtrate", set80211mgtrate),
DEF_CMD_ARG("mgmtrate", set80211mgtrate),
DEF_CMD_ARG("maxretry", set80211maxretry),
DEF_CMD_ARG("fragthreshold", set80211fragthreshold),
2005-12-14 19:44:39 +00:00
DEF_CMD("burst", 1, set80211burst),
DEF_CMD("-burst", 0, set80211burst),
DEF_CMD_ARG("bmiss", set80211bmissthreshold),
DEF_CMD_ARG("bmissthreshold", set80211bmissthreshold),
DEF_CMD("shortgi", 1, set80211shortgi),
DEF_CMD("-shortgi", 0, set80211shortgi),
DEF_CMD("ampdurx", 2, set80211ampdu),
DEF_CMD("-ampdurx", -2, set80211ampdu),
DEF_CMD("ampdutx", 1, set80211ampdu),
DEF_CMD("-ampdutx", -1, set80211ampdu),
DEF_CMD("ampdu", 3, set80211ampdu), /* NB: tx+rx */
DEF_CMD("-ampdu", -3, set80211ampdu),
DEF_CMD_ARG("ampdulimit", set80211ampdulimit),
DEF_CMD_ARG("ampdudensity", set80211ampdudensity),
DEF_CMD("amsdurx", 2, set80211amsdu),
DEF_CMD("-amsdurx", -2, set80211amsdu),
DEF_CMD("amsdutx", 1, set80211amsdu),
DEF_CMD("-amsdutx", -1, set80211amsdu),
DEF_CMD("amsdu", 3, set80211amsdu), /* NB: tx+rx */
DEF_CMD("-amsdu", -3, set80211amsdu),
DEF_CMD_ARG("amsdulimit", set80211amsdulimit),
DEF_CMD("puren", 1, set80211puren),
DEF_CMD("-puren", 0, set80211puren),
DEF_CMD("doth", 1, set80211doth),
DEF_CMD("-doth", 0, set80211doth),
DEF_CMD("dfs", 1, set80211dfs),
DEF_CMD("-dfs", 0, set80211dfs),
DEF_CMD("htcompat", 1, set80211htcompat),
DEF_CMD("-htcompat", 0, set80211htcompat),
DEF_CMD("dwds", 1, set80211dwds),
DEF_CMD("-dwds", 0, set80211dwds),
DEF_CMD("inact", 1, set80211inact),
DEF_CMD("-inact", 0, set80211inact),
DEF_CMD("tsn", 1, set80211tsn),
DEF_CMD("-tsn", 0, set80211tsn),
DEF_CMD_ARG("regdomain", set80211regdomain),
DEF_CMD_ARG("country", set80211country),
DEF_CMD("indoor", 'I', set80211location),
DEF_CMD("-indoor", 'O', set80211location),
DEF_CMD("outdoor", 'O', set80211location),
DEF_CMD("-outdoor", 'I', set80211location),
DEF_CMD("anywhere", ' ', set80211location),
DEF_CMD("ecm", 1, set80211ecm),
DEF_CMD("-ecm", 0, set80211ecm),
DEF_CMD("dotd", 1, set80211dotd),
DEF_CMD("-dotd", 0, set80211dotd),
DEF_CMD_ARG("htprotmode", set80211htprotmode),
DEF_CMD("ht20", 1, set80211htconf),
DEF_CMD("-ht20", 0, set80211htconf),
DEF_CMD("ht40", 3, set80211htconf), /* NB: 20+40 */
DEF_CMD("-ht40", 0, set80211htconf),
DEF_CMD("ht", 3, set80211htconf), /* NB: 20+40 */
DEF_CMD("-ht", 0, set80211htconf),
DEF_CMD("rifs", 1, set80211rifs),
DEF_CMD("-rifs", 0, set80211rifs),
DEF_CMD("smps", IEEE80211_HTCAP_SMPS_ENA, set80211smps),
DEF_CMD("smpsdyn", IEEE80211_HTCAP_SMPS_DYNAMIC, set80211smps),
DEF_CMD("-smps", IEEE80211_HTCAP_SMPS_OFF, set80211smps),
/* XXX for testing */
DEF_CMD_ARG("chanswitch", set80211chanswitch),
DEF_CMD_ARG("tdmaslot", set80211tdmaslot),
DEF_CMD_ARG("tdmaslotcnt", set80211tdmaslotcnt),
DEF_CMD_ARG("tdmaslotlen", set80211tdmaslotlen),
DEF_CMD_ARG("tdmabintval", set80211tdmabintval),
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
DEF_CMD_ARG("meshttl", set80211meshttl),
DEF_CMD("meshforward", 1, set80211meshforward),
DEF_CMD("-meshforward", 0, set80211meshforward),
DEF_CMD("meshgate", 1, set80211meshgate),
DEF_CMD("-meshgate", 0, set80211meshgate),
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
DEF_CMD("meshpeering", 1, set80211meshpeering),
DEF_CMD("-meshpeering", 0, set80211meshpeering),
DEF_CMD_ARG("meshmetric", set80211meshmetric),
DEF_CMD_ARG("meshpath", set80211meshpath),
DEF_CMD("meshrt:flush", IEEE80211_MESH_RTCMD_FLUSH, set80211meshrtcmd),
DEF_CMD_ARG("meshrt:add", set80211addmeshrt),
DEF_CMD_ARG("meshrt:del", set80211delmeshrt),
DEF_CMD_ARG("hwmprootmode", set80211hwmprootmode),
DEF_CMD_ARG("hwmpmaxhops", set80211hwmpmaxhops),
/* vap cloning support */
DEF_CLONE_CMD_ARG("wlanaddr", set80211clone_wlanaddr),
DEF_CLONE_CMD_ARG("wlanbssid", set80211clone_wlanbssid),
DEF_CLONE_CMD_ARG("wlandev", set80211clone_wlandev),
DEF_CLONE_CMD_ARG("wlanmode", set80211clone_wlanmode),
DEF_CLONE_CMD("beacons", 1, set80211clone_beacons),
DEF_CLONE_CMD("-beacons", 0, set80211clone_beacons),
DEF_CLONE_CMD("bssid", 1, set80211clone_bssid),
DEF_CLONE_CMD("-bssid", 0, set80211clone_bssid),
DEF_CLONE_CMD("wdslegacy", 1, set80211clone_wdslegacy),
DEF_CLONE_CMD("-wdslegacy", 0, set80211clone_wdslegacy),
};
static struct afswtch af_ieee80211 = {
.af_name = "af_ieee80211",
.af_af = AF_UNSPEC,
.af_other_status = ieee80211_status,
};
static __constructor void
ieee80211_ctor(void)
{
int i;
for (i = 0; i < nitems(ieee80211_cmds); i++)
cmd_register(&ieee80211_cmds[i]);
af_register(&af_ieee80211);
clone_setdefcallback("wlan", wlan_create);
}