freebsd-skq/sys/dev/atkbdc/atkbdc_isa.c

326 lines
9.9 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
2003-06-11 00:34:37 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_kbd.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
2004-05-30 20:27:19 +00:00
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/bus.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#include <dev/atkbdc/atkbdc_subr.h>
#include <dev/atkbdc/atkbdcreg.h>
#include <isa/isareg.h>
#include <isa/isavar.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
static int atkbdc_isa_probe(device_t dev);
static int atkbdc_isa_attach(device_t dev);
static device_t atkbdc_isa_add_child(device_t bus, u_int order, const char *name,
2009-02-05 18:38:39 +00:00
int unit);
static struct resource *atkbdc_isa_alloc_resource(device_t dev, device_t child,
int type, int *rid, rman_res_t start, rman_res_t end,
rman_res_t count, u_int flags);
static int atkbdc_isa_release_resource(device_t dev, device_t child,
int type, int rid, struct resource *r);
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
static device_method_t atkbdc_isa_methods[] = {
DEVMETHOD(device_probe, atkbdc_isa_probe),
DEVMETHOD(device_attach, atkbdc_isa_attach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
DEVMETHOD(bus_add_child, atkbdc_isa_add_child),
DEVMETHOD(bus_print_child, atkbdc_print_child),
DEVMETHOD(bus_read_ivar, atkbdc_read_ivar),
DEVMETHOD(bus_write_ivar, atkbdc_write_ivar),
DEVMETHOD(bus_get_resource_list,atkbdc_get_resource_list),
DEVMETHOD(bus_alloc_resource, atkbdc_isa_alloc_resource),
DEVMETHOD(bus_release_resource, atkbdc_isa_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource),
DEVMETHOD(bus_delete_resource, bus_generic_rl_delete_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
{ 0, 0 }
};
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
static driver_t atkbdc_isa_driver = {
ATKBDC_DRIVER_NAME,
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
atkbdc_isa_methods,
sizeof(atkbdc_softc_t *),
};
static struct isa_pnp_id atkbdc_ids[] = {
{ 0x0303d041, "Keyboard controller (i8042)" }, /* PNP0303 */
{ 0x0b03d041, "Keyboard controller (i8042)" }, /* PNP030B */
{ 0x2003d041, "Keyboard controller (i8042)" }, /* PNP0320 */
{ 0 }
};
static int
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
atkbdc_isa_probe(device_t dev)
{
struct resource *port0;
struct resource *port1;
rman_res_t start;
rman_res_t count;
int error;
int rid;
#if defined(__i386__) || defined(__amd64__)
bus_space_tag_t tag;
bus_space_handle_t ioh1;
volatile int i;
register_t flags;
#endif
/* check PnP IDs */
if (ISA_PNP_PROBE(device_get_parent(dev), dev, atkbdc_ids) == ENXIO)
return ENXIO;
device_set_desc(dev, "Keyboard controller (i8042)");
1999-05-30 11:12:30 +00:00
/*
* Adjust I/O port resources.
* The AT keyboard controller uses two ports (a command/data port
* 0x60 and a status port 0x64), which may be given to us in
* one resource (0x60 through 0x64) or as two separate resources
* (0x60 and 0x64). Some brain-damaged ACPI BIOS has reversed
* command/data port and status port. Furthermore, /boot/device.hints
* may contain just one port, 0x60. We shall adjust resource settings
* so that these two ports are available as two separate resources
* in correct order.
*/
device_quiet(dev);
rid = 0;
if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &start, &count) != 0)
return ENXIO;
if (start == IO_KBD + KBD_STATUS_PORT) {
start = IO_KBD;
count++;
}
if (count > 1) /* adjust the count and/or start port */
bus_set_resource(dev, SYS_RES_IOPORT, rid, start, 1);
port0 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
if (port0 == NULL)
return ENXIO;
rid = 1;
if (bus_get_resource(dev, SYS_RES_IOPORT, rid, NULL, NULL) != 0)
bus_set_resource(dev, SYS_RES_IOPORT, 1,
start + KBD_STATUS_PORT, 1);
port1 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
if (port1 == NULL) {
bus_release_resource(dev, SYS_RES_IOPORT, 0, port0);
return ENXIO;
}
#if defined(__i386__) || defined(__amd64__)
/*
* Check if we really have AT keyboard controller. Poll status
* register until we get "all clear" indication. If no such
* indication comes, it probably means that there is no AT
* keyboard controller present. Give up in such case. Check relies
* on the fact that reading from non-existing in/out port returns
* 0xff on i386. May or may not be true on other platforms.
*/
tag = rman_get_bustag(port0);
ioh1 = rman_get_bushandle(port1);
flags = intr_disable();
for (i = 0; i != 65535; i++) {
if ((bus_space_read_1(tag, ioh1, 0) & 0x2) == 0)
break;
}
intr_restore(flags);
if (i == 65535) {
bus_release_resource(dev, SYS_RES_IOPORT, 0, port0);
bus_release_resource(dev, SYS_RES_IOPORT, 1, port1);
if (bootverbose)
device_printf(dev, "AT keyboard controller not found\n");
return ENXIO;
}
#endif
device_verbose(dev);
error = atkbdc_probe_unit(device_get_unit(dev), port0, port1);
bus_release_resource(dev, SYS_RES_IOPORT, 0, port0);
bus_release_resource(dev, SYS_RES_IOPORT, 1, port1);
return error;
}
static int
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
atkbdc_isa_attach(device_t dev)
{
atkbdc_softc_t *sc;
int unit;
int error;
int rid;
unit = device_get_unit(dev);
sc = *(atkbdc_softc_t **)device_get_softc(dev);
if (sc == NULL) {
/*
* We have to maintain two copies of the kbdc_softc struct,
* as the low-level console needs to have access to the
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
* keyboard controller before kbdc is probed and attached.
* kbdc_soft[] contains the default entry for that purpose.
* See atkbdc.c. XXX
*/
sc = atkbdc_get_softc(unit);
if (sc == NULL)
return ENOMEM;
}
rid = 0;
sc->retry = 5000;
sc->port0 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
RF_ACTIVE);
if (sc->port0 == NULL)
return ENXIO;
rid = 1;
sc->port1 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
RF_ACTIVE);
if (sc->port1 == NULL) {
bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->port0);
return ENXIO;
}
/*
* If the device is not created by the PnP BIOS or ACPI, then
* the hint for the IRQ is on the child atkbd device, not the
* keyboard controller, so this can fail.
*/
rid = 0;
sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
error = atkbdc_attach_unit(unit, sc, sc->port0, sc->port1);
if (error) {
bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->port0);
bus_release_resource(dev, SYS_RES_IOPORT, 1, sc->port1);
if (sc->irq != NULL)
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq);
return error;
}
*(atkbdc_softc_t **)device_get_softc(dev) = sc;
bus_generic_probe(dev);
bus_generic_attach(dev);
return 0;
}
static device_t
atkbdc_isa_add_child(device_t bus, u_int order, const char *name, int unit)
{
atkbdc_device_t *ivar;
atkbdc_softc_t *sc;
device_t child;
int t;
sc = *(atkbdc_softc_t **)device_get_softc(bus);
ivar = malloc(sizeof(struct atkbdc_device), M_ATKBDDEV,
M_NOWAIT | M_ZERO);
if (!ivar)
return NULL;
child = device_add_child_ordered(bus, order, name, unit);
if (child == NULL) {
free(ivar, M_ATKBDDEV);
return child;
}
resource_list_init(&ivar->resources);
ivar->rid = order;
/*
* If the device is not created by the PnP BIOS or ACPI, refer
* to device hints for IRQ. We always populate the resource
* list entry so we can use a standard bus_get_resource()
* method.
*/
if (order == KBDC_RID_KBD) {
if (sc->irq == NULL) {
if (resource_int_value(name, unit, "irq", &t) != 0)
t = -1;
} else
t = rman_get_start(sc->irq);
if (t > 0)
resource_list_add(&ivar->resources, SYS_RES_IRQ,
ivar->rid, t, t, 1);
}
if (resource_disabled(name, unit))
device_disable(child);
device_set_ivars(child, ivar);
return child;
}
struct resource *
atkbdc_isa_alloc_resource(device_t dev, device_t child, int type, int *rid,
rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
{
atkbdc_softc_t *sc;
sc = *(atkbdc_softc_t **)device_get_softc(dev);
if (type == SYS_RES_IRQ && *rid == KBDC_RID_KBD && sc->irq != NULL)
return (sc->irq);
return (bus_generic_rl_alloc_resource(dev, child, type, rid, start,
end, count, flags));
}
static int
atkbdc_isa_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
atkbdc_softc_t *sc;
sc = *(atkbdc_softc_t **)device_get_softc(dev);
if (type == SYS_RES_IRQ && rid == KBDC_RID_KBD && r == sc->irq)
return (0);
return (bus_generic_rl_release_resource(dev, child, type, rid, r));
}
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
DRIVER_MODULE(atkbdc, isa, atkbdc_isa_driver, atkbdc_devclass, 0, 0);
DRIVER_MODULE(atkbdc, acpi, atkbdc_isa_driver, atkbdc_devclass, 0, 0);
ISA_PNP_INFO(atkbdc_ids);