freebsd-skq/sys/dev/mmcnull/mmcnull.c

464 lines
12 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2013 Ilya Bakulin. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/module.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/systm.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/sysctl.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/scsi/scsi_all.h>
static int is_sdio_mode = 1;
struct mmcnull_softc {
device_t dev;
struct mtx sc_mtx;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
struct callout tick;
union ccb *cur_ccb;
};
static void mmcnull_identify(driver_t *, device_t);
static int mmcnull_probe(device_t);
static int mmcnull_attach(device_t);
static int mmcnull_detach(device_t);
static void mmcnull_action_sd(struct cam_sim *, union ccb *);
static void mmcnull_action_sdio(struct cam_sim *, union ccb *);
static void mmcnull_intr_sd(void *xsc);
static void mmcnull_intr_sdio(void *xsc);
static void mmcnull_poll(struct cam_sim *);
static void
mmcnull_identify(driver_t *driver, device_t parent)
{
device_t child;
if (resource_disabled("mmcnull", 0))
return;
if (device_get_unit(parent) != 0)
return;
/* Avoid duplicates. */
if (device_find_child(parent, "mmcnull", -1))
return;
child = BUS_ADD_CHILD(parent, 20, "mmcnull", 0);
if (child == NULL) {
device_printf(parent, "add MMCNULL child failed\n");
return;
}
}
static int
mmcnull_probe(device_t dev)
{
device_set_desc(dev, "Emulated MMC controller");
return (BUS_PROBE_DEFAULT);
}
static int
mmcnull_attach(device_t dev)
{
struct mmcnull_softc *sc;
sim_action_func action_func;
sc = device_get_softc(dev);
sc->dev = dev;
mtx_init(&sc->sc_mtx, "mmcnullmtx", NULL, MTX_DEF);
if ((sc->devq = cam_simq_alloc(1)) == NULL)
return (ENOMEM);
if (is_sdio_mode)
action_func = mmcnull_action_sdio;
else
action_func = mmcnull_action_sd;
sc->sim = cam_sim_alloc(action_func, mmcnull_poll, "mmcnull", sc,
device_get_unit(dev), &sc->sc_mtx, 1, 1,
sc->devq);
if (sc->sim == NULL) {
cam_simq_free(sc->devq);
device_printf(dev, "cannot allocate CAM SIM\n");
return (EINVAL);
}
mtx_lock(&sc->sc_mtx);
if (xpt_bus_register(sc->sim, dev, 0) != 0) {
device_printf(dev,
"cannot register SCSI pass-through bus\n");
cam_sim_free(sc->sim, FALSE);
cam_simq_free(sc->devq);
mtx_unlock(&sc->sc_mtx);
return (EINVAL);
}
mtx_unlock(&sc->sc_mtx);
callout_init_mtx(&sc->tick, &sc->sc_mtx, 0); /* Callout to emulate interrupts */
device_printf(dev, "attached OK\n");
return (0);
}
static int
mmcnull_detach(device_t dev)
{
struct mmcnull_softc *sc;
sc = device_get_softc(dev);
if (sc == NULL)
return (EINVAL);
if (sc->sim != NULL) {
mtx_lock(&sc->sc_mtx);
xpt_bus_deregister(cam_sim_path(sc->sim));
cam_sim_free(sc->sim, FALSE);
mtx_unlock(&sc->sc_mtx);
}
if (sc->devq != NULL)
cam_simq_free(sc->devq);
callout_drain(&sc->tick);
mtx_destroy(&sc->sc_mtx);
device_printf(dev, "detached OK\n");
return (0);
}
/*
* The interrupt handler
* This implementation calls it via callout(9)
* with the mutex already taken
*/
static void
mmcnull_intr_sd(void *xsc) {
struct mmcnull_softc *sc;
union ccb *ccb;
struct ccb_mmcio *mmcio;
sc = (struct mmcnull_softc *) xsc;
mtx_assert(&sc->sc_mtx, MA_OWNED);
ccb = sc->cur_ccb;
mmcio = &ccb->mmcio;
device_printf(sc->dev, "mmcnull_intr: MMC command = %d\n",
mmcio->cmd.opcode);
switch (mmcio->cmd.opcode) {
case MMC_GO_IDLE_STATE:
device_printf(sc->dev, "Reset device\n");
break;
case SD_SEND_IF_COND:
mmcio->cmd.resp[0] = 0x1AA; // To match mmc_xpt expectations :-)
break;
case MMC_APP_CMD:
mmcio->cmd.resp[0] = R1_APP_CMD;
break;
case SD_SEND_RELATIVE_ADDR:
case MMC_SELECT_CARD:
mmcio->cmd.resp[0] = 0x1 << 16;
break;
case ACMD_SD_SEND_OP_COND:
mmcio->cmd.resp[0] = 0xc0ff8000;
mmcio->cmd.resp[0] |= MMC_OCR_CARD_BUSY;
break;
case MMC_ALL_SEND_CID:
/* Note: this is a real CID from Wandboard int mmc */
mmcio->cmd.resp[0] = 0x1b534d30;
mmcio->cmd.resp[1] = 0x30303030;
mmcio->cmd.resp[2] = 0x10842806;
mmcio->cmd.resp[3] = 0x5700e900;
break;
case MMC_SEND_CSD:
/* Note: this is a real CSD from Wandboard int mmc */
mmcio->cmd.resp[0] = 0x400e0032;
mmcio->cmd.resp[1] = 0x5b590000;
mmcio->cmd.resp[2] = 0x751f7f80;
mmcio->cmd.resp[3] = 0x0a404000;
break;
case MMC_READ_SINGLE_BLOCK:
case MMC_READ_MULTIPLE_BLOCK:
strcpy(mmcio->cmd.data->data, "WTF?!");
break;
default:
device_printf(sc->dev, "mmcnull_intr_sd: unknown command\n");
mmcio->cmd.error = 1;
}
ccb->ccb_h.status = CAM_REQ_CMP;
sc->cur_ccb = NULL;
xpt_done(ccb);
}
static void
mmcnull_intr_sdio_newintr(void *xsc) {
struct mmcnull_softc *sc;
struct cam_path *dpath;
sc = (struct mmcnull_softc *) xsc;
mtx_assert(&sc->sc_mtx, MA_OWNED);
device_printf(sc->dev, "mmcnull_intr_sdio_newintr()\n");
/* Our path */
if (xpt_create_path(&dpath, NULL, cam_sim_path(sc->sim), 0, 0) != CAM_REQ_CMP) {
device_printf(sc->dev, "mmcnull_intr_sdio_newintr(): cannot create path\n");
return;
}
xpt_async(AC_UNIT_ATTENTION, dpath, NULL);
xpt_free_path(dpath);
}
static void
mmcnull_intr_sdio(void *xsc) {
struct mmcnull_softc *sc;
union ccb *ccb;
struct ccb_mmcio *mmcio;
sc = (struct mmcnull_softc *) xsc;
mtx_assert(&sc->sc_mtx, MA_OWNED);
ccb = sc->cur_ccb;
mmcio = &ccb->mmcio;
device_printf(sc->dev, "mmcnull_intr: MMC command = %d\n",
mmcio->cmd.opcode);
switch (mmcio->cmd.opcode) {
case MMC_GO_IDLE_STATE:
device_printf(sc->dev, "Reset device\n");
break;
case SD_SEND_IF_COND:
mmcio->cmd.resp[0] = 0x1AA; // To match mmc_xpt expectations :-)
break;
case MMC_APP_CMD:
mmcio->cmd.resp[0] = R1_APP_CMD;
break;
case IO_SEND_OP_COND:
mmcio->cmd.resp[0] = 0x12345678;
mmcio->cmd.resp[0] |= ~ R4_IO_MEM_PRESENT;
break;
case SD_SEND_RELATIVE_ADDR:
case MMC_SELECT_CARD:
mmcio->cmd.resp[0] = 0x1 << 16;
break;
case ACMD_SD_SEND_OP_COND:
/* TODO: steal valid OCR from somewhere :-) */
mmcio->cmd.resp[0] = 0x123;
mmcio->cmd.resp[0] |= MMC_OCR_CARD_BUSY;
break;
case MMC_ALL_SEND_CID:
mmcio->cmd.resp[0] = 0x1234;
mmcio->cmd.resp[1] = 0x5678;
mmcio->cmd.resp[2] = 0x9ABC;
mmcio->cmd.resp[3] = 0xDEF0;
break;
case MMC_READ_SINGLE_BLOCK:
case MMC_READ_MULTIPLE_BLOCK:
strcpy(mmcio->cmd.data->data, "WTF?!");
break;
case SD_IO_RW_DIRECT:
device_printf(sc->dev, "Scheduling interrupt generation...\n");
callout_reset(&sc->tick, hz / 10, mmcnull_intr_sdio_newintr, sc);
break;
default:
device_printf(sc->dev, "mmcnull_intr_sdio: unknown command\n");
}
ccb->ccb_h.status = CAM_REQ_CMP;
sc->cur_ccb = NULL;
xpt_done(ccb);
}
/*
* This is a MMC IO handler
* It extracts MMC command from CCB and sends it
* to the h/w
*/
static void
mmcnull_handle_mmcio(struct cam_sim *sim, union ccb *ccb)
{
struct mmcnull_softc *sc;
struct ccb_mmcio *mmcio;
sc = cam_sim_softc(sim);
mmcio = &ccb->mmcio;
ccb->ccb_h.status = CAM_REQ_INPROG;
sc->cur_ccb = ccb;
/* Real h/w will wait for the interrupt */
if (is_sdio_mode)
callout_reset(&sc->tick, hz / 10, mmcnull_intr_sdio, sc);
else
callout_reset(&sc->tick, hz / 10, mmcnull_intr_sd, sc);
}
static void
mmcnull_action_sd(struct cam_sim *sim, union ccb *ccb)
{
struct mmcnull_softc *sc;
sc = cam_sim_softc(sim);
if (sc == NULL) {
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
xpt_done(ccb);
return;
}
mtx_assert(&sc->sc_mtx, MA_OWNED);
device_printf(sc->dev, "action: func_code %0x\n", ccb->ccb_h.func_code);
switch (ccb->ccb_h.func_code) {
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi;
cpi = &ccb->cpi;
cpi->version_num = 1;
cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE | PI_WIDE_16;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN;
cpi->hba_eng_cnt = 0;
cpi->max_target = 0;
cpi->max_lun = 0;
cpi->initiator_id = 1;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "FreeBSD Foundation", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 100; /* XXX WTF? */
cpi->protocol = PROTO_MMCSD;
cpi->protocol_version = SCSI_REV_0;
cpi->transport = XPORT_MMCSD;
cpi->transport_version = 0;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts = &ccb->cts;
struct ccb_trans_settings_mmc *mcts;
mcts = &ccb->cts.proto_specific.mmc;
device_printf(sc->dev, "Got XPT_GET_TRAN_SETTINGS\n");
cts->protocol = PROTO_MMCSD;
cts->protocol_version = 0;
cts->transport = XPORT_MMCSD;
cts->transport_version = 0;
cts->xport_specific.valid = 0;
mcts->host_f_max = 12000000;
mcts->host_f_min = 200000;
mcts->host_ocr = 1; /* Fix this */
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SET_TRAN_SETTINGS:
device_printf(sc->dev, "Got XPT_SET_TRAN_SETTINGS, should update IOS...\n");
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_RESET_BUS:
device_printf(sc->dev, "Got XPT_RESET_BUS, ACK it...\n");
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_MMC_IO:
/*
* Here is the HW-dependent part of
* sending the command to the underlying h/w
* At some point in the future an interrupt comes.
* Then the request will be marked as completed.
*/
device_printf(sc->dev, "Got XPT_MMC_IO\n");
mmcnull_handle_mmcio(sim, ccb);
return;
break;
case XPT_RESET_DEV:
/* This is sent by `camcontrol reset`*/
device_printf(sc->dev, "Got XPT_RESET_DEV\n");
ccb->ccb_h.status = CAM_REQ_CMP;
break;
default:
device_printf(sc->dev, "Func code %d is unknown\n", ccb->ccb_h.func_code);
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
return;
}
static void
mmcnull_action_sdio(struct cam_sim *sim, union ccb *ccb) {
mmcnull_action_sd(sim, ccb);
}
static void
mmcnull_poll(struct cam_sim *sim)
{
return;
}
static device_method_t mmcnull_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, mmcnull_identify),
DEVMETHOD(device_probe, mmcnull_probe),
DEVMETHOD(device_attach, mmcnull_attach),
DEVMETHOD(device_detach, mmcnull_detach),
DEVMETHOD_END
};
static driver_t mmcnull_driver = {
"mmcnull", mmcnull_methods, sizeof(struct mmcnull_softc)
};
static devclass_t mmcnull_devclass;
DRIVER_MODULE(mmcnull, isa, mmcnull_driver, mmcnull_devclass, 0, 0);