freebsd-skq/sys/dev/bvm/bvm_dbg.c

101 lines
2.5 KiB
C
Raw Normal View History

bhyve import part 2 of 2, guest kernel changes. This branch is now considered frozen: future bhyve development will take place in a branch off -CURRENT. sys/dev/bvm/bvm_console.c sys/dev/bvm/bvm_dbg.c - simple console driver/gdb debug port used for bringup. supported by user-space bhyve executable sys/conf/options.amd64 sys/amd64/amd64/minidump_machdep.c - allow NKPT to be set in the kernel config file sys/amd64/conf/GENERIC - mptable config options; bhyve user-space executable creates an mptable with number of CPUs, and optional vendor extension - add bvm console/debug - set NKPT to 512 to allow loading of large RAM disks from the loader - include kdb/gdb sys/amd64/amd64/local_apic.c sys/amd64/amd64/apic_vector.S sys/amd64/include/specialreg.h - if x2apic mode available, use MSRs to access the local APIC, otherwise fall back to 'classic' MMIO mode sys/amd64/amd64/mp_machdep.c - support AP spinup on CPU models that don't have real-mode support by overwriting the real-mode page with a message that supplies the bhyve user-space executable with enough information to start the AP directly in 64-bit mode. sys/amd64/amd64/vm_machdep.c - insert pause statements into cpu shutdown busy-wait loops sys/dev/blackhole/blackhole.c sys/modules/blackhole/Makefile - boot-time loadable module that claims all PCI bus/slot/funcs specified in an env var that are to be used for PCI passthrough sys/amd64/amd64/intr_machdep.c - allow round-robin assignment of device interrupts to CPUs to be disabled from the loader sys/amd64/include/bus.h - convert string ins/outs instructions to loops of individual in/out since bhyve doesn't support these yet sys/kern/subr_bus.c - if the device was no created with a fixed devclass, then remove it's association with the devclass it was associated with during probe. Otherwise, new drivers do not get a chance to probe/attach since the device will stay married to the first driver that it probed successfully but failed to attach. Sponsored by: NetApp, Inc.
2011-05-14 18:37:24 +00:00
/*-
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <gdb/gdb.h>
#include <machine/cpufunc.h>
static gdb_probe_f bvm_dbg_probe;
static gdb_init_f bvm_dbg_init;
static gdb_term_f bvm_dbg_term;
static gdb_getc_f bvm_dbg_getc;
static gdb_putc_f bvm_dbg_putc;
GDB_DBGPORT(bvm, bvm_dbg_probe, bvm_dbg_init, bvm_dbg_term,
bvm_dbg_getc, bvm_dbg_putc);
#define BVM_DBG_PORT 0x224
static int bvm_dbg_port = BVM_DBG_PORT;
#define BVM_DBG_SIG ('B' << 8 | 'V')
bhyve import part 2 of 2, guest kernel changes. This branch is now considered frozen: future bhyve development will take place in a branch off -CURRENT. sys/dev/bvm/bvm_console.c sys/dev/bvm/bvm_dbg.c - simple console driver/gdb debug port used for bringup. supported by user-space bhyve executable sys/conf/options.amd64 sys/amd64/amd64/minidump_machdep.c - allow NKPT to be set in the kernel config file sys/amd64/conf/GENERIC - mptable config options; bhyve user-space executable creates an mptable with number of CPUs, and optional vendor extension - add bvm console/debug - set NKPT to 512 to allow loading of large RAM disks from the loader - include kdb/gdb sys/amd64/amd64/local_apic.c sys/amd64/amd64/apic_vector.S sys/amd64/include/specialreg.h - if x2apic mode available, use MSRs to access the local APIC, otherwise fall back to 'classic' MMIO mode sys/amd64/amd64/mp_machdep.c - support AP spinup on CPU models that don't have real-mode support by overwriting the real-mode page with a message that supplies the bhyve user-space executable with enough information to start the AP directly in 64-bit mode. sys/amd64/amd64/vm_machdep.c - insert pause statements into cpu shutdown busy-wait loops sys/dev/blackhole/blackhole.c sys/modules/blackhole/Makefile - boot-time loadable module that claims all PCI bus/slot/funcs specified in an env var that are to be used for PCI passthrough sys/amd64/amd64/intr_machdep.c - allow round-robin assignment of device interrupts to CPUs to be disabled from the loader sys/amd64/include/bus.h - convert string ins/outs instructions to loops of individual in/out since bhyve doesn't support these yet sys/kern/subr_bus.c - if the device was no created with a fixed devclass, then remove it's association with the devclass it was associated with during probe. Otherwise, new drivers do not get a chance to probe/attach since the device will stay married to the first driver that it probed successfully but failed to attach. Sponsored by: NetApp, Inc.
2011-05-14 18:37:24 +00:00
static int
bvm_dbg_probe(void)
{
int disabled, port;
disabled = 0;
resource_int_value("bvmdbg", 0, "disabled", &disabled);
if (!disabled) {
if (resource_int_value("bvmdbg", 0, "port", &port) == 0)
bvm_dbg_port = port;
if (inw(bvm_dbg_port) == BVM_DBG_SIG) {
/*
* Return a higher priority than 0 to override other
* gdb dbgport providers that may be present (e.g. uart)
*/
return (1);
}
}
bhyve import part 2 of 2, guest kernel changes. This branch is now considered frozen: future bhyve development will take place in a branch off -CURRENT. sys/dev/bvm/bvm_console.c sys/dev/bvm/bvm_dbg.c - simple console driver/gdb debug port used for bringup. supported by user-space bhyve executable sys/conf/options.amd64 sys/amd64/amd64/minidump_machdep.c - allow NKPT to be set in the kernel config file sys/amd64/conf/GENERIC - mptable config options; bhyve user-space executable creates an mptable with number of CPUs, and optional vendor extension - add bvm console/debug - set NKPT to 512 to allow loading of large RAM disks from the loader - include kdb/gdb sys/amd64/amd64/local_apic.c sys/amd64/amd64/apic_vector.S sys/amd64/include/specialreg.h - if x2apic mode available, use MSRs to access the local APIC, otherwise fall back to 'classic' MMIO mode sys/amd64/amd64/mp_machdep.c - support AP spinup on CPU models that don't have real-mode support by overwriting the real-mode page with a message that supplies the bhyve user-space executable with enough information to start the AP directly in 64-bit mode. sys/amd64/amd64/vm_machdep.c - insert pause statements into cpu shutdown busy-wait loops sys/dev/blackhole/blackhole.c sys/modules/blackhole/Makefile - boot-time loadable module that claims all PCI bus/slot/funcs specified in an env var that are to be used for PCI passthrough sys/amd64/amd64/intr_machdep.c - allow round-robin assignment of device interrupts to CPUs to be disabled from the loader sys/amd64/include/bus.h - convert string ins/outs instructions to loops of individual in/out since bhyve doesn't support these yet sys/kern/subr_bus.c - if the device was no created with a fixed devclass, then remove it's association with the devclass it was associated with during probe. Otherwise, new drivers do not get a chance to probe/attach since the device will stay married to the first driver that it probed successfully but failed to attach. Sponsored by: NetApp, Inc.
2011-05-14 18:37:24 +00:00
return (-1);
bhyve import part 2 of 2, guest kernel changes. This branch is now considered frozen: future bhyve development will take place in a branch off -CURRENT. sys/dev/bvm/bvm_console.c sys/dev/bvm/bvm_dbg.c - simple console driver/gdb debug port used for bringup. supported by user-space bhyve executable sys/conf/options.amd64 sys/amd64/amd64/minidump_machdep.c - allow NKPT to be set in the kernel config file sys/amd64/conf/GENERIC - mptable config options; bhyve user-space executable creates an mptable with number of CPUs, and optional vendor extension - add bvm console/debug - set NKPT to 512 to allow loading of large RAM disks from the loader - include kdb/gdb sys/amd64/amd64/local_apic.c sys/amd64/amd64/apic_vector.S sys/amd64/include/specialreg.h - if x2apic mode available, use MSRs to access the local APIC, otherwise fall back to 'classic' MMIO mode sys/amd64/amd64/mp_machdep.c - support AP spinup on CPU models that don't have real-mode support by overwriting the real-mode page with a message that supplies the bhyve user-space executable with enough information to start the AP directly in 64-bit mode. sys/amd64/amd64/vm_machdep.c - insert pause statements into cpu shutdown busy-wait loops sys/dev/blackhole/blackhole.c sys/modules/blackhole/Makefile - boot-time loadable module that claims all PCI bus/slot/funcs specified in an env var that are to be used for PCI passthrough sys/amd64/amd64/intr_machdep.c - allow round-robin assignment of device interrupts to CPUs to be disabled from the loader sys/amd64/include/bus.h - convert string ins/outs instructions to loops of individual in/out since bhyve doesn't support these yet sys/kern/subr_bus.c - if the device was no created with a fixed devclass, then remove it's association with the devclass it was associated with during probe. Otherwise, new drivers do not get a chance to probe/attach since the device will stay married to the first driver that it probed successfully but failed to attach. Sponsored by: NetApp, Inc.
2011-05-14 18:37:24 +00:00
}
static void
bvm_dbg_init(void)
{
}
static void
bvm_dbg_term(void)
{
}
static void
bvm_dbg_putc(int c)
{
outl(bvm_dbg_port, c);
}
static int
bvm_dbg_getc(void)
{
return (inl(bvm_dbg_port));
}