freebsd-skq/sys/amd64/conf/GENERIC

177 lines
6.0 KiB
Plaintext
Raw Normal View History

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
1998-10-07 03:42:44 +00:00
# $Id: GENERIC,v 1.121 1998/10/05 07:45:54 obrien Exp $
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
1995-12-24 08:11:46 +00:00
cpu "I686_CPU"
ident GENERIC
maxusers 32
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root device, "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
# Unless you know very well what you're doing, leave ft0 at drive 2, or
# remove the line entirely if you don't need it. Trying to configure
# it on another unit might cause surprises, see PR kern/7176.
1994-11-10 23:46:31 +00:00
tape ft0 at fdc0 drive 2
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
controller ncr0
#controller amd0
controller ahb0
controller ahc0
controller isp0
# This controller offers a number of configuration options, too many to
# document here - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller dpt0
controller adv0 at isa? port ? cam irq ?
1998-10-07 03:42:44 +00:00
controller adw0
controller bt0 at isa? port ? cam irq ?
controller aha0 at isa? port ? cam irq ?
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device da0
device sa0
1995-10-31 17:00:03 +00:00
device pass0
device cd0 #Only need one of these, the code dynamically grows
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
controller matcd0 at isa? port 0x230 bio
device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" conflicts tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint
1997-06-06 12:24:43 +00:00
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? disable flags 0x31 # Advanced Power Management
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at card?
#device pcic1 at card?
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
1996-07-11 11:18:45 +00:00
device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
1995-06-11 19:33:05 +00:00
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device fxp0
1998-05-21 03:22:20 +00:00
device tl0
1998-01-21 18:34:47 +00:00
device tx0
device vx0
device xl0
device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr
device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
1995-06-11 19:33:05 +00:00
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ex0 at isa? port? net irq? vector exintr
device fe0 at isa? port 0x300 net irq ? vector feintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
device cs0 at isa? port 0x300 net irq ? vector csintr
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
1995-06-11 19:33:05 +00:00
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
# This provides support for System V shared memory.
#
options SYSVSHM