d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
578e4bf777
freebsd-skq/sys/dev/puc/puc_pci.c

149 lines
5.3 KiB
C
Raw Normal View History

Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
/* $NetBSD: puc.c,v 1.7 2000/07/29 17:43:38 jlam Exp $ */
/*-
* Copyright (c) 2002 JF Hay. All rights reserved.
* Copyright (c) 2000 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
Use the standard FreeBSD license
2005-01-11 06:24:40 +00:00
* notice, this list of conditions and the following disclaimer.
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
Use the standard FreeBSD license
2005-01-11 06:24:40 +00:00
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
*/
Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
* Copyright (c) 1996, 1998, 1999
* Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
Add missing <sys/module.h> includes
2004-05-30 20:08:47 +00:00
#include <sys/module.h>
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
#include <dev/puc/puc_cfg.h>
Fix building with GCC 4.2: ensure types are defined before refering to them.
2006-06-29 16:27:19 +00:00
#include <dev/puc/puc_bfe.h>
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
static const struct puc_cfg *
puc_pci_match(device_t dev, const struct puc_cfg *desc)
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
{
Rewrite puc_pci_match() to handle non-trivial cases correctly. MFC after: 1 week
2007-10-13 12:14:20 +00:00
uint16_t vendor, device;
uint16_t subvendor, subdevice;
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
vendor = pci_get_vendor(dev);
device = pci_get_device(dev);
Rewrite puc_pci_match() to handle non-trivial cases correctly. MFC after: 1 week
2007-10-13 12:14:20 +00:00
subvendor = pci_get_subvendor(dev);
subdevice = pci_get_subdevice(dev);
while (desc->vendor != 0xffff) {
if (desc->vendor == vendor && desc->device == device) {
/* exact match */
if (desc->subvendor == subvendor &&
desc->subdevice == subdevice)
return (desc);
/* wildcard match */
if (desc->subvendor == 0xffff)
return (desc);
}
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
desc++;
Rewrite puc_pci_match() to handle non-trivial cases correctly. MFC after: 1 week
2007-10-13 12:14:20 +00:00
}
/* no match */
return (NULL);
Enhance puc(4) to support uart(4). This includes: o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4), o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530) to handle different hardware and determine resource sizes. o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both are used by uart(4) to get sufficient information to talk to the HW. o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O if I/O port space cannot be allocated, or vice versa. o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching to sio(4) fails (due to not having the sio driver). o Put struct puc_device_description in struct puc_softc instead of having a pointer to a device description in the softc. This allows us to create device descriptions on the fly without having to use malloc() or otherwise have them staticly defined. o Move puc_find_description() from puc.c to puc_pci.c as it's specific to PCI. o Add EBUS and SBUS frontends for use on sparc64. Note that the P in puc stands for PCI, so we kinda mess things up here. It's too soon to worry about it though. We'll know what to do about it in time. NOTE: This commit changes the behaviour of puc(4) to not quieten the device probe and attach for child devices. The uart(4) driver provides additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
}
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
static int
puc_pci_probe(device_t dev)
{
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
const struct puc_cfg *desc;
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
- Rename PCIx_HEADERTYPE* to PCIx_HDRTYPE* so the constants aren't so long. - Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds the header type. - Replace several magic numbers with appropriate constants for the header type register and a couple of PCI_FUNCMAX. - Merge to amd64 the fix to the i386 bridge code to skip devices with unknown header types. Requested by: imp (1, 2)
2003-08-28 21:22:25 +00:00
if ((pci_read_config(dev, PCIR_HDRTYPE, 1) & PCIM_HDRTYPE) != 0)
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
return (ENXIO);
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
desc = puc_pci_match(dev, puc_pci_devices);
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
if (desc == NULL)
return (ENXIO);
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
return (puc_bfe_probe(dev, desc));
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
}
static device_method_t puc_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, puc_pci_probe),
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
DEVMETHOD(device_attach, puc_bfe_attach),
DEVMETHOD(device_detach, puc_bfe_detach),
DEVMETHOD(bus_alloc_resource, puc_bus_alloc_resource),
DEVMETHOD(bus_release_resource, puc_bus_release_resource),
DEVMETHOD(bus_get_resource, puc_bus_get_resource),
DEVMETHOD(bus_read_ivar, puc_bus_read_ivar),
DEVMETHOD(bus_setup_intr, puc_bus_setup_intr),
DEVMETHOD(bus_teardown_intr, puc_bus_teardown_intr),
Add location and pnpinfo strings for puc device ports. The location is announced during boot and contains the port number. The pnpinfo string lists the port type (PUC_TYPE_* constants). Tested by: Boris Samorodov bsam ipt ru MFC after: 1 week
2011-06-14 18:19:48 +00:00
DEVMETHOD(bus_print_child, puc_bus_print_child),
DEVMETHOD(bus_child_pnpinfo_str, puc_bus_child_pnpinfo_str),
DEVMETHOD(bus_child_location_str, puc_bus_child_location_str),
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
{ 0, 0 }
};
static driver_t puc_pci_driver = {
Rewrite of puc(4). Significant changes are: o Properly use rman(9) to manage resources. This eliminates the need to puc-specific hacks to rman. It also allows devinfo(8) to be used to find out the specific assignment of resources to serial/parallel ports. o Compress the PCI device "database" by optimizing for the common case and to use a procedural interface to handle the exceptions. The procedural interface also generalizes the need to setup the hardware (program chipsets, program clock frequencies). o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by default and non-serdev devices are handled by the bus. o Use the serdev I/F to collect interrupt status and to handle interrupts across ports in priority order. o Sync the PCI device configuration to include devices found in NetBSD and not yet merged to FreeBSD. o Add support for Quatech 2, 4 and 8 port UARTs. o Add support for a couple dozen Timedia serial cards as found in Linux.
2006-04-28 21:21:53 +00:00
puc_driver_name,
Split the puc driver in pci specific and generic parts. Add a pccard frontend for it as well. The PCcard stuff does not work yet because there is still some PCImagic left in puc.c
2002-08-31 18:38:43 +00:00
puc_pci_methods,
sizeof(struct puc_softc),
};
DRIVER_MODULE(puc, pci, puc_pci_driver, puc_devclass, 0, 0);
Reference in New Issue Copy Permalink