freebsd-skq/sys/dev/usb/usb_quirks.c

131 lines
5.5 KiB
C
Raw Normal View History

/* $NetBSD: usb_quirks.c,v 1.50 2004/06/23 02:30:52 mycroft Exp $ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
2000-05-14 16:43:10 +00:00
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <dev/usb/usb.h>
#include "usbdevs.h"
#include <dev/usb/usb_quirks.h>
#ifdef USB_DEBUG
extern int usbdebug;
#endif
#define ANY 0xffff
Static const struct usbd_quirk_entry {
u_int16_t idVendor;
u_int16_t idProduct;
u_int16_t bcdDevice;
struct usbd_quirks quirks;
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
} usb_quirks[] = {
{ USB_VENDOR_KYE, USB_PRODUCT_KYE_NICHE, 0x100, { UQ_NO_SET_PROTO}},
{ USB_VENDOR_INSIDEOUT, USB_PRODUCT_INSIDEOUT_EDGEPORT4,
0x094, { UQ_SWAP_UNICODE}},
{ USB_VENDOR_DALLAS, USB_PRODUCT_DALLAS_J6502, 0x0a2, { UQ_BAD_ADC }},
{ USB_VENDOR_DALLAS, USB_PRODUCT_DALLAS_J6502, 0x0a2, { UQ_AU_NO_XU }},
{ USB_VENDOR_ALTEC, USB_PRODUCT_ALTEC_ADA70, 0x103, { UQ_BAD_ADC }},
{ USB_VENDOR_ALTEC, USB_PRODUCT_ALTEC_ASC495, 0x000, { UQ_BAD_AUDIO }},
{ USB_VENDOR_QTRONIX, USB_PRODUCT_QTRONIX_980N, 0x110, { UQ_SPUR_BUT_UP }},
{ USB_VENDOR_ALCOR2, USB_PRODUCT_ALCOR2_KBD_HUB, 0x001, { UQ_SPUR_BUT_UP }},
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_HUB0100, 0x102, { UQ_BUS_POWERED }},
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232, 0x102, { UQ_BUS_POWERED }},
{ USB_VENDOR_METRICOM, USB_PRODUCT_METRICOM_RICOCHET_GS,
0x100, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_SANYO, USB_PRODUCT_SANYO_SCP4900,
0x000, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_TI, USB_PRODUCT_TI_UTUSB41, 0x110, { UQ_POWER_CLAIM }},
{ USB_VENDOR_TELEX, USB_PRODUCT_TELEX_MIC1, 0x009, { UQ_AU_NO_FRAC }},
{ USB_VENDOR_SILICONPORTALS, USB_PRODUCT_SILICONPORTALS_YAPPHONE,
0x100, { UQ_AU_INP_ASYNC }},
/* XXX These should have a revision number, but I don't know what they are. */
{ USB_VENDOR_HP, USB_PRODUCT_HP_895C, ANY, { UQ_BROKEN_BIDIR }},
{ USB_VENDOR_HP, USB_PRODUCT_HP_880C, ANY, { UQ_BROKEN_BIDIR }},
{ USB_VENDOR_HP, USB_PRODUCT_HP_815C, ANY, { UQ_BROKEN_BIDIR }},
{ USB_VENDOR_HP, USB_PRODUCT_HP_810C, ANY, { UQ_BROKEN_BIDIR }},
{ USB_VENDOR_HP, USB_PRODUCT_HP_830C, ANY, { UQ_BROKEN_BIDIR }},
{ USB_VENDOR_HP, USB_PRODUCT_HP_1220C, ANY, { UQ_BROKEN_BIDIR }},
/* YAMAHA router's ucdDevice is the version of farmware and often changes. */
{ USB_VENDOR_YAMAHA, USB_PRODUCT_YAMAHA_RTA54I,
ANY, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_YAMAHA, USB_PRODUCT_YAMAHA_RTA55I,
ANY, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_YAMAHA, USB_PRODUCT_YAMAHA_RTW65B,
ANY, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_YAMAHA, USB_PRODUCT_YAMAHA_RTW65I,
ANY, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_QUALCOMM, USB_PRODUCT_QUALCOMM_CDMA_MSM,
ANY, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_QUALCOMM2, USB_PRODUCT_QUALCOMM2_CDMA_MSM,
ANY, { UQ_ASSUME_CM_OVER_DATA }},
{ USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_AS64LX,
0x100, { UQ_ASSUME_CM_OVER_DATA }},
{ 0, 0, 0, { 0 } }
};
const struct usbd_quirks usbd_no_quirk = { 0 };
const struct usbd_quirks *
usbd_find_quirk(usb_device_descriptor_t *d)
{
const struct usbd_quirk_entry *t;
u_int16_t vendor = UGETW(d->idVendor);
u_int16_t product = UGETW(d->idProduct);
u_int16_t revision = UGETW(d->bcdDevice);
Synchronisation with NetBSD as of 1999/11/16: Cleaning up the code: - Declare many functions static - Change variable names to make them more self explanatory - Change usbd_request_handle -> usbd_xfer_handle - Syntactical changes - Remove some unused code - Other KNF changes Interrupt context handling - Change delay to usbd_delay_ms were possible (takes polling mode into account) - Change detection mechanism for interrupt context Add support for pre-allocation DMA-able memory by device driver Add preliminary support for isochronous to the UHCI driver (not for OHCI yet). usb.c, uhci.c, ohci.c - Initial attempt at detachable USB host controllers - Handle the use_polling flag with a lttle more care and only set it if we are cold booting. usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c - Make sure an aborted pipe is marked as not running. - Start queued request in the right order. - Insert some more DIAGNOSTIC sanity checks. - Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN. usb.c, usb_subr.c - Add an event mechanism so that a userland process can watch devices come and go. ohci.c - Handle the case when a USB transfer is so long that it crosses two page (4K) boundaries. OHCI cannot do that with a single TD so we make a chain. ulpt.c - Use a bigger buffer when transferring data. - Pre-allocate the DMA buffer. This makes the driver slightly more efficient. - Comment out the GET_DEVICE_ID code, because for some unknown reason it causes printing to fail sometimes. usb.h - Add a macro to extract the isoc type. - Add a macro to check whether the routine has been entered after splusb and if not, complain. usbdi.c - Fix a glitch in dequeueing and aborting requests on interrupt pipes. - Add a flag in the request to determine if the data copying is done by the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
for (t = usb_quirks; t->idVendor != 0; t++) {
if (t->idVendor == vendor &&
t->idProduct == product &&
(t->bcdDevice == ANY || t->bcdDevice == revision))
break;
}
#ifdef USB_DEBUG
if (usbdebug && t->quirks.uq_flags)
logprintf("usbd_find_quirk 0x%04x/0x%04x/%x: %d\n",
UGETW(d->idVendor), UGETW(d->idProduct),
UGETW(d->bcdDevice), t->quirks.uq_flags);
#endif
return (&t->quirks);
}