d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
57f8ad0238
freebsd-skq/sys/netinet/ip_fw2.c

5066 lines
127 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* Copyright (c) 2002 Luigi Rizzo, Universita` di Pisa
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
Remove whitespace at end of line.
2003-06-23 21:18:56 +00:00
* 2. Redistributions in binary form must reproduce the above copyright
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
*
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Add FBSDID to all files in netinet so that people can more easily include file version information in bug reports. Approved by: re (kensmith)
2007-10-07 20:44:24 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#define DEB(x)
#define DDB(x) x
/*
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
* Implement IP packet firewall (new version)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
Revert the last change to sys/modules/ipfw/Makefile and fix a standalone module build in a better way. Silence from: andre MFC after: 3 days
2004-08-26 14:18:30 +00:00
#if !defined(KLD_MODULE)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include "opt_ipfw.h"
Include opt_ipdivert.h so that the message announcing ipfw correctly describes the state of IPDIVERT.
2007-02-03 22:11:53 +00:00
#include "opt_ipdivert.h"
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include "opt_ipdn.h"
#include "opt_inet.h"
#ifndef INET
#error IPFIREWALL requires INET.
#endif /* INET */
Revert the last change to sys/modules/ipfw/Makefile and fix a standalone module build in a better way. Silence from: andre MFC after: 3 days
2004-08-26 14:18:30 +00:00
#endif
obey opt_inet6.h and opt_ipsec.h in kernel build directory. Requested by: hrs
2005-11-29 17:56:11 +00:00
#include "opt_inet6.h"
#include "opt_ipsec.h"
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
#include "opt_mac.h"
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <sys/param.h>
#include <sys/systm.h>
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
#include <sys/condvar.h>
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
#include <sys/eventhandler.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
#include <sys/lock.h>
Add the ability to associate ipfw rules with a specific prison ID. Since the only thing truly unique about a prison is it's ID, I figured this would be the most granular way of handling this. This commit makes the following changes: - Adds tokenizing and parsing for the ``jail'' command line option to the ipfw(8) userspace utility. - Append the ipfw opcode list with O_JAIL. - While Iam here, add a comment informing others that if they want to add additional opcodes, they should append them to the end of the list to avoid ABI breakage. - Add ``fw_prid'' to the ipfw ucred cache structure. - When initializing ucred cache, if the process is jailed, set fw_prid to the prison ID, otherwise set it to -1. - Update man page to reflect these changes. This change was a strong motivator behind the ucred caching mechanism in ipfw. A sample usage of this new functionality could be: ipfw add count ip from any to any jail 2 It should be noted that because ucred based constraints are only implemented for TCP and UDP packets, the same applies for jail associations. Conceptual head nod by: pjd Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-12 22:06:55 +00:00
#include <sys/jail.h>
Add some missing <sys/module.h> includes which are masked by the one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
#include <sys/module.h>
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
#include <sys/priv.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <sys/proc.h>
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
#include <sys/rwlock.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/ucred.h>
#include <net/if.h>
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
#include <net/radix.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <net/route.h>
Link pf 4.1 to the build: - move ftp-proxy from libexec to usr.sbin - add tftp-proxy - new altq mtag link Approved by: re (kensmith)
2007-07-03 12:46:08 +00:00
#include <net/pf_mtag.h>
Hide ipfw internal data structures behind IPFW_INTERNAL rather than exposing them to all consumers of ip_fw.h. These structures are used in both ipfw(8) and ipfw(4), but not part of the user<->kernel interface for other applications to use, rather, shared implementation. MFC after: 3 days Reported by: Paul Vixie <paul at vix dot com>
2008-01-25 14:38:27 +00:00
#define IPFW_INTERNAL /* Access to protected data structures in ip_fw.h. */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/in_pcb.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/ip_icmp.h>
#include <netinet/ip_fw.h>
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
#include <netinet/ip_divert.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <netinet/ip_dummynet.h>
Set scope on MC address so IPv6 carp advertisement will not get dropped in ip6_output. In case this fails handle the error directly and log it[1]. In addition permit CARP over v6 in ip_fw2. PR: kern/98622 Similar patch by: suz Discussed with: glebius [1] Tested by: Paul.Dekkers surfnet.nl, Philippe.Pegon crc.u-strasbg.fr MFC after: 3 days
2006-10-07 10:19:58 +00:00
#include <netinet/ip_carp.h>
Recognise IPv6 PIM packets. MFC after: 1 week
2006-08-31 16:56:45 +00:00
#include <netinet/pim.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <netinet/tcp.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/tcpip.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
Add SCTP as a known upper layer protocol over v6. We are not yet aware of the protocol internals but this way SCTP traffic over v6 will not be discarded. Reported by: Peter Lei via rrs Tested by: Peter Lei <peterlei cisco.com>
2006-11-13 19:07:32 +00:00
#include <netinet/sctp.h>
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
#include <netinet/libalias/alias.h>
#include <netinet/libalias/alias_local.h>
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Add a ng_ipfw node, implementing a quick and simple interface between ipfw(4) and netgraph(4) facilities. Reviewed by: andre, brooks, julian
2005-02-05 12:06:33 +00:00
#include <netgraph/ng_ipfw.h>
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
#include <altq/if_altq.h>
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
#include <netinet/ip6.h>
#include <netinet/icmp6.h>
include scope6_var.h for in6_clearscope().
2005-07-26 00:19:58 +00:00
#ifdef INET6
#include <netinet6/scope6_var.h>
#endif
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#include <netinet/if_ether.h> /* XXX for ETHERTYPE_IP */
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
#include <machine/in_cksum.h> /* XXX for in_cksum */
Complete break-out of sys/sys/mac.h into sys/security/mac/mac_framework.h begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now contains the userspace and user<->kernel API and definitions, with all in-kernel interfaces moved to mac_framework.h, which is now included across most of the kernel instead. This change is the first step in a larger cleanup and sweep of MAC Framework interfaces in the kernel, and will not be MFC'd. Obtained from: TrustedBSD Project Sponsored by: SPARTA
2006-10-22 11:52:19 +00:00
#include <security/mac/mac_framework.h>
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
/*
* set_disable contains one bit per set value (0..31).
* If the bit is set, all rules with the corresponding set
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
* are disabled. Set RESVD_SET(31) is reserved for the default rule
* and rules that are not deleted by the flush command,
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
* and CANNOT be disabled.
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
* Rules in set RESVD_SET can only be deleted explicitly.
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
*/
static u_int32_t set_disable;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
static int fw_verbose;
static int verbose_limit;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
static struct callout ipfw_timeout;
Change the state allocator from using regular malloc to using a UMA zone instead. This should eliminate a bit of the locking overhead associated with with malloc and reduce the memory consumption associated with each new state. Reviewed by: rwatson, andre Silence on: ipfw@ MFC after: 1 week
2005-01-31 00:48:39 +00:00
static uma_zone_t ipfw_dyn_rule_zone;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#define IPFW_DEFAULT_RULE 65535
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
/*
* Data structure to cache our ucred related
* information. This structure only gets used if
* the user specified UID/GID based constraints in
* a firewall rule.
*/
struct ip_fw_ugid {
gid_t fw_groups[NGROUPS];
int fw_ngroups;
uid_t fw_uid;
Add the ability to associate ipfw rules with a specific prison ID. Since the only thing truly unique about a prison is it's ID, I figured this would be the most granular way of handling this. This commit makes the following changes: - Adds tokenizing and parsing for the ``jail'' command line option to the ipfw(8) userspace utility. - Append the ipfw opcode list with O_JAIL. - While Iam here, add a comment informing others that if they want to add additional opcodes, they should append them to the end of the list to avoid ABI breakage. - Add ``fw_prid'' to the ipfw ucred cache structure. - When initializing ucred cache, if the process is jailed, set fw_prid to the prison ID, otherwise set it to -1. - Update man page to reflect these changes. This change was a strong motivator behind the ucred caching mechanism in ipfw. A sample usage of this new functionality could be: ipfw add count ip from any to any jail 2 It should be noted that because ucred based constraints are only implemented for TCP and UDP packets, the same applies for jail associations. Conceptual head nod by: pjd Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-12 22:06:55 +00:00
int fw_prid;
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
};
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
#define IPFW_TABLES_MAX 128
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
struct ip_fw_chain {
struct ip_fw *rules; /* list of rules */
struct ip_fw *reap; /* list of rules to reap */
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
LIST_HEAD(, cfg_nat) nat; /* list of nat entries */
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
struct radix_node_head *tables[IPFW_TABLES_MAX];
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
struct rwlock rwmtx;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
};
#define IPFW_LOCK_INIT(_chain) \
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
rw_init(&(_chain)->rwmtx, "IPFW static rules")
#define IPFW_LOCK_DESTROY(_chain) rw_destroy(&(_chain)->rwmtx)
Remove the now-unused NET_{LOCK,UNLOCK,ASSERT}_GIANT() macros, which previously conditionally acquired Giant based on debug.mpsafenet. As that has now been removed, they are no longer required. Removing them significantly simplifies error-handling in the socket layer, eliminated quite a bit of unwinding of locking in error cases. While here clean up the now unneeded opt_net.h, which previously was used for the NET_WITH_GIANT kernel option. Clean up some related gotos for consistency. Reviewed by: bz, csjp Tested by: kris Approved by: re (kensmith)
2007-08-06 14:26:03 +00:00
#define IPFW_WLOCK_ASSERT(_chain) rw_assert(&(_chain)->rwmtx, RA_WLOCKED)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
#define IPFW_RLOCK(p) rw_rlock(&(p)->rwmtx)
#define IPFW_RUNLOCK(p) rw_runlock(&(p)->rwmtx)
#define IPFW_WLOCK(p) rw_wlock(&(p)->rwmtx)
#define IPFW_WUNLOCK(p) rw_wunlock(&(p)->rwmtx)
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* list of rules for layer 3
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
static struct ip_fw_chain layer3_chain;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
MALLOC_DEFINE(M_IPFW, "IpFw/IpAcct", "IpFw/IpAcct chain's");
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
MALLOC_DEFINE(M_IPFW_TBL, "ipfw_tbl", "IpFw tables");
struct table_entry {
struct radix_node rn[2];
struct sockaddr_in addr, mask;
u_int32_t value;
};
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
static int fw_debug = 1;
static int autoinc_step = 100; /* bounded to 1..1000 in add_rule() */
Reintroduce net.inet6.ip6.fw.enable sysctl to dis/enable the ipv6 processing seperately. Also use pfil hook/unhook instead of keeping the check functions in pfil just to return there based on the sysctl. While here fix some whitespace on a nearby SYSCTL_ macro.
2006-05-12 04:41:27 +00:00
extern int ipfw_chg_hook(SYSCTL_HANDLER_ARGS);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#ifdef SYSCTL_NODE
SYSCTL_NODE(_net_inet_ip, OID_AUTO, fw, CTLFLAG_RW, 0, "Firewall");
Reintroduce net.inet6.ip6.fw.enable sysctl to dis/enable the ipv6 processing seperately. Also use pfil hook/unhook instead of keeping the check functions in pfil just to return there based on the sysctl. While here fix some whitespace on a nearby SYSCTL_ macro.
2006-05-12 04:41:27 +00:00
SYSCTL_PROC(_net_inet_ip_fw, OID_AUTO, enable,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE3, &fw_enable, 0,
ipfw_chg_hook, "I", "Enable ipfw");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, autoinc_step, CTLFLAG_RW,
&autoinc_step, 0, "Rule number autincrement step");
Lock the sysctl(8) knobs that turn ip{,6}fw(8) firewalling and firewall logging on and off when at elevated securelevel(8). It would be nice to be able to only lock these at securelevel >= 3, like rules are, but there is no such functionality at present. I don't see reason to be adding features to securelevel(8) with MAC being merged into 5.0. PR: kern/39396 Reviewed by: luigi MFC after: 1 week
2002-08-25 03:50:29 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, one_pass,
Introduce the ability to flag a sysctl for operation at secure level 2 or 3 in addition to secure level 1. The mask supports up to a secure level of 8 but only add defines through CTLFLAG_SECURE3 for now. As per the missif in the log entry for 1.11 of ip_fw2.c which added the secure flag to the IPFW sysctl's in the first place, change the secure level requirement from 1 to 3 now that we have support for it. Reviewed by: imp With Design Suggestions by: imp
2003-01-14 19:35:33 +00:00
CTLFLAG_RW | CTLFLAG_SECURE3,
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
&fw_one_pass, 0,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
"Only do a single pass through ipfw when using dummynet(4)");
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, debug, CTLFLAG_RW,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
&fw_debug, 0, "Enable printing of debug ip_fw statements");
Lock the sysctl(8) knobs that turn ip{,6}fw(8) firewalling and firewall logging on and off when at elevated securelevel(8). It would be nice to be able to only lock these at securelevel >= 3, like rules are, but there is no such functionality at present. I don't see reason to be adding features to securelevel(8) with MAC being merged into 5.0. PR: kern/39396 Reviewed by: luigi MFC after: 1 week
2002-08-25 03:50:29 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, verbose,
Introduce the ability to flag a sysctl for operation at secure level 2 or 3 in addition to secure level 1. The mask supports up to a secure level of 8 but only add defines through CTLFLAG_SECURE3 for now. As per the missif in the log entry for 1.11 of ip_fw2.c which added the secure flag to the IPFW sysctl's in the first place, change the secure level requirement from 1 to 3 now that we have support for it. Reviewed by: imp With Design Suggestions by: imp
2003-01-14 19:35:33 +00:00
CTLFLAG_RW | CTLFLAG_SECURE3,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
&fw_verbose, 0, "Log matches to ipfw rules");
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, verbose_limit, CTLFLAG_RW,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
&verbose_limit, 0, "Set upper limit of matches of ipfw rules logged");
/*
* Description of dynamic rules.
*
* Dynamic rules are stored in lists accessed through a hash table
* (ipfw_dyn_v) whose size is curr_dyn_buckets. This value can
* be modified through the sysctl variable dyn_buckets which is
* updated when the table becomes empty.
*
* XXX currently there is only one list, ipfw_dyn.
*
* When a packet is received, its address fields are first masked
* with the mask defined for the rule, then hashed, then matched
* against the entries in the corresponding list.
* Dynamic rules can be used for different purposes:
* + stateful rules;
* + enforcing limits on the number of sessions;
* + in-kernel NAT (not implemented yet)
*
* The lifetime of dynamic rules is regulated by dyn_*_lifetime,
* measured in seconds and depending on the flags.
*
* The total number of dynamic rules is stored in dyn_count.
* The max number of dynamic rules is dyn_max. When we reach
* the maximum number of rules we do not create anymore. This is
* done to avoid consuming too much memory, but also too much
* time when searching on each packet (ideally, we should try instead
* to put a limit on the length of the list on each bucket...).
*
* Each dynamic rule holds a pointer to the parent ipfw rule so
* we know what action to perform. Dynamic rules are removed when
* the parent rule is deleted. XXX we should make them survive.
*
* There are some limitations with dynamic rules -- we do not
* obey the 'randomized match', and we do not do multiple
* passes through the firewall. XXX check the latter!!!
*/
static ipfw_dyn_rule **ipfw_dyn_v = NULL;
static u_int32_t dyn_buckets = 256; /* must be power of 2 */
static u_int32_t curr_dyn_buckets = 256; /* must be power of 2 */
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
static struct mtx ipfw_dyn_mtx; /* mutex guarding dynamic rules */
#define IPFW_DYN_LOCK_INIT() \
mtx_init(&ipfw_dyn_mtx, "IPFW dynamic rules", NULL, MTX_DEF)
#define IPFW_DYN_LOCK_DESTROY() mtx_destroy(&ipfw_dyn_mtx)
#define IPFW_DYN_LOCK() mtx_lock(&ipfw_dyn_mtx)
#define IPFW_DYN_UNLOCK() mtx_unlock(&ipfw_dyn_mtx)
#define IPFW_DYN_LOCK_ASSERT() mtx_assert(&ipfw_dyn_mtx, MA_OWNED)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* Timeouts for various events in handing dynamic rules.
*/
static u_int32_t dyn_ack_lifetime = 300;
static u_int32_t dyn_syn_lifetime = 20;
static u_int32_t dyn_fin_lifetime = 1;
static u_int32_t dyn_rst_lifetime = 1;
static u_int32_t dyn_udp_lifetime = 10;
static u_int32_t dyn_short_lifetime = 5;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
/*
* Keepalives are sent if dyn_keepalive is set. They are sent every
* dyn_keepalive_period seconds, in the last dyn_keepalive_interval
* seconds of lifetime of a rule.
* dyn_rst_lifetime and dyn_fin_lifetime should be strictly lower
* than dyn_keepalive_period.
*/
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
static u_int32_t dyn_keepalive_interval = 20;
static u_int32_t dyn_keepalive_period = 5;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
static u_int32_t dyn_keepalive = 1; /* do send keepalives */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
static u_int32_t static_count; /* # of static rules */
static u_int32_t static_len; /* size in bytes of static rules */
static u_int32_t dyn_count; /* # of dynamic rules */
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
static u_int32_t dyn_max = 4096; /* max # of dynamic rules */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_buckets, CTLFLAG_RW,
&dyn_buckets, 0, "Number of dyn. buckets");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, curr_dyn_buckets, CTLFLAG_RD,
&curr_dyn_buckets, 0, "Current Number of dyn. buckets");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_count, CTLFLAG_RD,
&dyn_count, 0, "Number of dyn. rules");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_max, CTLFLAG_RW,
&dyn_max, 0, "Max number of dyn. rules");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, static_count, CTLFLAG_RD,
&static_count, 0, "Number of static rules");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_ack_lifetime, CTLFLAG_RW,
&dyn_ack_lifetime, 0, "Lifetime of dyn. rules for acks");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_syn_lifetime, CTLFLAG_RW,
&dyn_syn_lifetime, 0, "Lifetime of dyn. rules for syn");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_fin_lifetime, CTLFLAG_RW,
&dyn_fin_lifetime, 0, "Lifetime of dyn. rules for fin");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_rst_lifetime, CTLFLAG_RW,
&dyn_rst_lifetime, 0, "Lifetime of dyn. rules for rst");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_udp_lifetime, CTLFLAG_RW,
&dyn_udp_lifetime, 0, "Lifetime of dyn. rules for UDP");
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_short_lifetime, CTLFLAG_RW,
&dyn_short_lifetime, 0, "Lifetime of dyn. rules for other situations");
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
SYSCTL_INT(_net_inet_ip_fw, OID_AUTO, dyn_keepalive, CTLFLAG_RW,
&dyn_keepalive, 0, "Enable keepalives for dyn. rules");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Fix broken build of rev. 1.108 in case of no INET6 and IPFIREWALL compiled into kernel. Spotted and tested by: Michal Mertl <mime at traveller.cz>
2005-08-14 18:20:33 +00:00
#ifdef INET6
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
/*
* IPv6 specific variables
*/
SYSCTL_DECL(_net_inet6_ip6);
static struct sysctl_ctx_list ip6_fw_sysctl_ctx;
static struct sysctl_oid *ip6_fw_sysctl_tree;
Fix broken build of rev. 1.108 in case of no INET6 and IPFIREWALL compiled into kernel. Spotted and tested by: Michal Mertl <mime at traveller.cz>
2005-08-14 18:20:33 +00:00
#endif /* INET6 */
#endif /* SYSCTL_NODE */
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
MODULE_DEPEND(ipfw, libalias, 1, 1, 1);
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
static int fw_deny_unknown_exthdrs = 1;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
* L3HDR maps an ipv4 pointer into a layer3 header pointer of type T
* Other macros just cast void * into the appropriate type
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
#define L3HDR(T, ip) ((T *)((u_int32_t *)(ip) + (ip)->ip_hl))
#define TCP(p) ((struct tcphdr *)(p))
Add SCTP as a known upper layer protocol over v6. We are not yet aware of the protocol internals but this way SCTP traffic over v6 will not be discarded. Reported by: Peter Lei via rrs Tested by: Peter Lei <peterlei cisco.com>
2006-11-13 19:07:32 +00:00
#define SCTP(p) ((struct sctphdr *)(p))
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
#define UDP(p) ((struct udphdr *)(p))
Introduce a struct icmphdr which contains the type, code, and cksum fields of an ICMP packet. Use this to allow ipfw to pullup only these values since it does not use the rest of the packet and it was failed on ICMP packets because they were not long enough. struct icmp should probably be modified to use these at some point, but that will break a fair bit of code so it can wait for another day. On the off chance that adding this struct breaks something in ports, bump __FreeBSD_version. Reported by: Randy Bush <randy at psg dot com> Tested by: Randy Bush <randy at psg dot com>
2005-04-26 18:10:21 +00:00
#define ICMP(p) ((struct icmphdr *)(p))
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
#define ICMP6(p) ((struct icmp6_hdr *)(p))
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
static __inline int
Introduce a struct icmphdr which contains the type, code, and cksum fields of an ICMP packet. Use this to allow ipfw to pullup only these values since it does not use the rest of the packet and it was failed on ICMP packets because they were not long enough. struct icmp should probably be modified to use these at some point, but that will break a fair bit of code so it can wait for another day. On the off chance that adding this struct breaks something in ports, bump __FreeBSD_version. Reported by: Randy Bush <randy at psg dot com> Tested by: Randy Bush <randy at psg dot com>
2005-04-26 18:10:21 +00:00
icmptype_match(struct icmphdr *icmp, ipfw_insn_u32 *cmd)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
int type = icmp->icmp_type;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return (type <= ICMP_MAXTYPE && (cmd->d[0] & (1<<type)) );
}
#define TT ( (1 << ICMP_ECHO) | (1 << ICMP_ROUTERSOLICIT) | \
(1 << ICMP_TSTAMP) | (1 << ICMP_IREQ) | (1 << ICMP_MASKREQ) )
static int
Introduce a struct icmphdr which contains the type, code, and cksum fields of an ICMP packet. Use this to allow ipfw to pullup only these values since it does not use the rest of the packet and it was failed on ICMP packets because they were not long enough. struct icmp should probably be modified to use these at some point, but that will break a fair bit of code so it can wait for another day. On the off chance that adding this struct breaks something in ports, bump __FreeBSD_version. Reported by: Randy Bush <randy at psg dot com> Tested by: Randy Bush <randy at psg dot com>
2005-04-26 18:10:21 +00:00
is_icmp_query(struct icmphdr *icmp)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
int type = icmp->icmp_type;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return (type <= ICMP_MAXTYPE && (TT & (1<<type)) );
}
#undef TT
/*
* The following checks use two arrays of 8 or 16 bits to store the
* bits that we want set or clear, respectively. They are in the
* low and high half of cmd->arg1 or cmd->d[0].
*
* We scan options and store the bits we find set. We succeed if
*
* (want_set & ~bits) == 0 && (want_clear & ~bits) == want_clear
*
* The code is sometimes optimized not to store additional variables.
*/
static int
flags_match(ipfw_insn *cmd, u_int8_t bits)
{
u_char want_clear;
bits = ~bits;
if ( ((cmd->arg1 & 0xff) & bits) != 0)
return 0; /* some bits we want set were clear */
want_clear = (cmd->arg1 >> 8) & 0xff;
if ( (want_clear & bits) != want_clear)
return 0; /* some bits we want clear were set */
return 1;
}
static int
ipopts_match(struct ip *ip, ipfw_insn *cmd)
{
int optlen, bits = 0;
u_char *cp = (u_char *)(ip + 1);
int x = (ip->ip_hl << 2) - sizeof (struct ip);
for (; x > 0; x -= optlen, cp += optlen) {
int opt = cp[IPOPT_OPTVAL];
if (opt == IPOPT_EOL)
break;
if (opt == IPOPT_NOP)
optlen = 1;
else {
optlen = cp[IPOPT_OLEN];
if (optlen <= 0 || optlen > x)
return 0; /* invalid or truncated */
}
switch (opt) {
default:
break;
case IPOPT_LSRR:
bits |= IP_FW_IPOPT_LSRR;
break;
case IPOPT_SSRR:
bits |= IP_FW_IPOPT_SSRR;
break;
case IPOPT_RR:
bits |= IP_FW_IPOPT_RR;
break;
case IPOPT_TS:
bits |= IP_FW_IPOPT_TS;
break;
}
}
return (flags_match(cmd, bits));
}
static int
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
tcpopts_match(struct tcphdr *tcp, ipfw_insn *cmd)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
int optlen, bits = 0;
u_char *cp = (u_char *)(tcp + 1);
int x = (tcp->th_off << 2) - sizeof(struct tcphdr);
for (; x > 0; x -= optlen, cp += optlen) {
int opt = cp[0];
if (opt == TCPOPT_EOL)
break;
if (opt == TCPOPT_NOP)
optlen = 1;
else {
optlen = cp[1];
if (optlen <= 0)
break;
}
switch (opt) {
default:
break;
case TCPOPT_MAXSEG:
bits |= IP_FW_TCPOPT_MSS;
break;
case TCPOPT_WINDOW:
bits |= IP_FW_TCPOPT_WINDOW;
break;
case TCPOPT_SACK_PERMITTED:
case TCPOPT_SACK:
bits |= IP_FW_TCPOPT_SACK;
break;
case TCPOPT_TIMESTAMP:
bits |= IP_FW_TCPOPT_TS;
break;
}
}
return (flags_match(cmd, bits));
}
static int
iface_match(struct ifnet *ifp, ipfw_insn_if *cmd)
{
if (ifp == NULL) /* no iface with this packet, match fails */
return 0;
/* Check by name or by IP address */
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
if (cmd->name[0] != '\0') { /* match by name */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/* Check name */
Replace the if_name and if_unit members of struct ifnet with new members if_xname, if_dname, and if_dunit. if_xname is the name of the interface and if_dname/unit are the driver name and instance. This change paves the way for interface renaming and enhanced pseudo device creation and configuration symantics. Approved By: re (in principle) Reviewed By: njl, imp Tested On: i386, amd64, sparc64 Obtained From: NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
if (cmd->p.glob) {
if (fnmatch(cmd->name, ifp->if_xname, 0) == 0)
return(1);
} else {
if (strncmp(ifp->if_xname, cmd->name, IFNAMSIZ) == 0)
return(1);
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
} else {
struct ifaddr *ia;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
/* XXX lock? */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
TAILQ_FOREACH(ia, &ifp->if_addrhead, ifa_link) {
if (ia->ifa_addr->sa_family != AF_INET)
continue;
if (cmd->p.ip.s_addr == ((struct sockaddr_in *)
(ia->ifa_addr))->sin_addr.s_addr)
return(1); /* match */
}
}
return(0); /* no match, fail ... */
}
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
/*
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
* The verify_path function checks if a route to the src exists and
* if it is reachable via ifp (when provided).
*
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
* The 'verrevpath' option checks that the interface that an IP packet
Remove whitespace at end of line.
2003-06-23 21:18:56 +00:00
* arrives on is the same interface that traffic destined for the
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
* packet's source address would be routed out of. The 'versrcreach'
* option just checks that the source address is reachable via any route
* (except default) in the routing table. These two are a measure to block
* forged packets. This is also commonly known as "anti-spoofing" or Unicast
* Reverse Path Forwarding (Unicast RFP) in Cisco-ese. The name of the knobs
* is purposely reminiscent of the Cisco IOS command,
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
*
* ip verify unicast reverse-path
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
* ip verify unicast source reachable-via any
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
*
* which implements the same functionality. But note that syntax is
* misleading. The check may be performed on all IP packets whether unicast,
* multicast, or broadcast.
*/
static int
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
verify_path(struct in_addr src, struct ifnet *ifp)
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
{
Fix verify_rev_path() function. The author of this function tried to cut corners which completely broke down when the routing table locking was introduced. Reviewed by: sam (mentor) Approved by: re (rwatson)
2003-11-27 09:40:13 +00:00
struct route ro;
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
struct sockaddr_in *dst;
Fix verify_rev_path() function. The author of this function tried to cut corners which completely broke down when the routing table locking was introduced. Reviewed by: sam (mentor) Approved by: re (rwatson)
2003-11-27 09:40:13 +00:00
bzero(&ro, sizeof(ro));
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
Fix verify_rev_path() function. The author of this function tried to cut corners which completely broke down when the routing table locking was introduced. Reviewed by: sam (mentor) Approved by: re (rwatson)
2003-11-27 09:40:13 +00:00
dst = (struct sockaddr_in *)&(ro.ro_dst);
dst->sin_family = AF_INET;
dst->sin_len = sizeof(*dst);
dst->sin_addr = src;
rtalloc_ign(&ro, RTF_CLONING);
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
Introduce tcp_hostcache and remove the tcp specific metrics from the routing table. Move all usage and references in the tcp stack from the routing table metrics to the tcp hostcache. It caches measured parameters of past tcp sessions to provide better initial start values for following connections from or to the same source or destination. Depending on the network parameters to/from the remote host this can lead to significant speedups for new tcp connections after the first one because they inherit and shortcut the learning curve. tcp_hostcache is designed for multiple concurrent access in SMP environments with high contention and is hash indexed by remote ip address. It removes significant locking requirements from the tcp stack with regard to the routing table. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 20:07:39 +00:00
if (ro.ro_rt == NULL)
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
return 0;
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
Fix minor bug in uRPF: If net.link.ether.inet.useloopback=1 and we send broadcast packet using our own source ip address it may be rejected by uRPF rules. Same bug was fixed for IPv6 in rev. 1.115 by suz. PR: kern/76971 Approved by: glebius (mentor) MFC after: 3 days
2006-01-24 13:38:06 +00:00
/*
* If ifp is provided, check for equality with rtentry.
* We should use rt->rt_ifa->ifa_ifp, instead of rt->rt_ifp,
* in order to pass packets injected back by if_simloop():
* if useloopback == 1 routing entry (via lo0) for our own address
* may exist, so we need to handle routing assymetry.
*/
if (ifp != NULL && ro.ro_rt->rt_ifa->ifa_ifp != ifp) {
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
RTFREE(ro.ro_rt);
return 0;
}
/* if no ifp provided, check if rtentry is not default route */
if (ifp == NULL &&
satosin(rt_key(ro.ro_rt))->sin_addr.s_addr == INADDR_ANY) {
Introduce tcp_hostcache and remove the tcp specific metrics from the routing table. Move all usage and references in the tcp stack from the routing table metrics to the tcp hostcache. It caches measured parameters of past tcp sessions to provide better initial start values for following connections from or to the same source or destination. Depending on the network parameters to/from the remote host this can lead to significant speedups for new tcp connections after the first one because they inherit and shortcut the learning curve. tcp_hostcache is designed for multiple concurrent access in SMP environments with high contention and is hash indexed by remote ip address. It removes significant locking requirements from the tcp stack with regard to the routing table. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 20:07:39 +00:00
RTFREE(ro.ro_rt);
return 0;
}
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
Extend versrcreach by checking against the rt_flags for RTF_REJECT and RTF_BLACKHOLE as well. To quote the submitter: The uRPF loose-check implementation by the industry vendors, at least on Cisco and possibly Juniper, will fail the check if the route of the source address is pointed to Null0 (on Juniper, discard or reject route). What this means is, even if uRPF Loose-check finds the route, if the route is pointed to blackhole, uRPF loose-check must fail. This allows people to utilize uRPF loose-check mode as a pseudo-packet-firewall without using any manual filtering configuration -- one can simply inject a IGP or BGP prefix with next-hop set to a static route that directs to null/discard facility. This results in uRPF Loose-check failing on all packets with source addresses that are within the range of the nullroute. Submitted by: James Jun <james@towardex.com>
2004-07-21 19:55:14 +00:00
/* or if this is a blackhole/reject route */
if (ifp == NULL && ro.ro_rt->rt_flags & (RTF_REJECT|RTF_BLACKHOLE)) {
RTFREE(ro.ro_rt);
return 0;
}
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
/* found valid route */
Introduce tcp_hostcache and remove the tcp specific metrics from the routing table. Move all usage and references in the tcp stack from the routing table metrics to the tcp hostcache. It caches measured parameters of past tcp sessions to provide better initial start values for following connections from or to the same source or destination. Depending on the network parameters to/from the remote host this can lead to significant speedups for new tcp connections after the first one because they inherit and shortcut the learning curve. tcp_hostcache is designed for multiple concurrent access in SMP environments with high contention and is hash indexed by remote ip address. It removes significant locking requirements from the tcp stack with regard to the routing table. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 20:07:39 +00:00
RTFREE(ro.ro_rt);
whitespace fix
2003-06-28 14:16:53 +00:00
return 1;
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
}
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#ifdef INET6
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
/*
* ipv6 specific rules here...
*/
static __inline int
icmp6type_match (int type, ipfw_insn_u32 *cmd)
{
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
return (type <= ICMP6_MAXTYPE && (cmd->d[type/32] & (1<<(type%32)) ) );
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
static int
flow6id_match( int curr_flow, ipfw_insn_u32 *cmd )
{
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
int i;
for (i=0; i <= cmd->o.arg1; ++i )
if (curr_flow == cmd->d[i] )
return 1;
return 0;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
/* support for IP6_*_ME opcodes */
static int
search_ip6_addr_net (struct in6_addr * ip6_addr)
{
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
struct ifnet *mdc;
struct ifaddr *mdc2;
struct in6_ifaddr *fdm;
struct in6_addr copia;
TAILQ_FOREACH(mdc, &ifnet, if_link)
Use TAILQ_FOREACH consistently.
2006-06-29 17:09:47 +00:00
TAILQ_FOREACH(mdc2, &mdc->if_addrlist, ifa_list) {
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
if (mdc2->ifa_addr->sa_family == AF_INET6) {
fdm = (struct in6_ifaddr *)mdc2;
copia = fdm->ia_addr.sin6_addr;
/* need for leaving scope_id in the sock_addr */
in6_clearscope(&copia);
if (IN6_ARE_ADDR_EQUAL(ip6_addr, &copia))
return 1;
}
}
return 0;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
static int
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
verify_path6(struct in6_addr *src, struct ifnet *ifp)
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
{
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
struct route_in6 ro;
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
struct sockaddr_in6 *dst;
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
bzero(&ro, sizeof(ro));
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
dst = (struct sockaddr_in6 * )&(ro.ro_dst);
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
dst->sin6_family = AF_INET6;
dst->sin6_len = sizeof(*dst);
dst->sin6_addr = *src;
rtalloc_ign((struct route *)&ro, RTF_CLONING);
if (ro.ro_rt == NULL)
return 0;
fixed a bug that uRPF does not work properly for an IPv6 packet bound for the sending machine itself (this is a bug introduced due to a change in ip6_input.c:Rev.1.83) Pointed out by: Sean McNeil and J.R.Oldroyd MFC after: 3 days
2005-11-10 22:10:39 +00:00
/*
* if ifp is provided, check for equality with rtentry
* We should use rt->rt_ifa->ifa_ifp, instead of rt->rt_ifp,
* to support the case of sending packets to an address of our own.
* (where the former interface is the first argument of if_simloop()
* (=ifp), the latter is lo0)
*/
if (ifp != NULL && ro.ro_rt->rt_ifa->ifa_ifp != ifp) {
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
RTFREE(ro.ro_rt);
return 0;
}
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
/* if no ifp provided, check if rtentry is not default route */
if (ifp == NULL &&
IN6_IS_ADDR_UNSPECIFIED(&satosin6(rt_key(ro.ro_rt))->sin6_addr)) {
RTFREE(ro.ro_rt);
return 0;
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
}
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
/* or if this is a blackhole/reject route */
if (ifp == NULL && ro.ro_rt->rt_flags & (RTF_REJECT|RTF_BLACKHOLE)) {
RTFREE(ro.ro_rt);
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
return 0;
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
}
/* found valid route */
RTFREE(ro.ro_rt);
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
return 1;
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
static __inline int
hash_packet6(struct ipfw_flow_id *id)
{
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
u_int32_t i;
Use only lower 64bit of src/dest (and src/dest port) for hashing of IPv6 connections and get rid of the flow_id as it is not guaranteed to be stable some (most?) current implementations seem to just zero it out. PR: kern/88664 Reported by: jylefort Submitted by: Joost Bekkers (w/ changes) Tested by "regisr" <regisrApoboxDcom>
2006-05-14 23:42:24 +00:00
i = (id->dst_ip6.__u6_addr.__u6_addr32[2]) ^
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
(id->dst_ip6.__u6_addr.__u6_addr32[3]) ^
Use only lower 64bit of src/dest (and src/dest port) for hashing of IPv6 connections and get rid of the flow_id as it is not guaranteed to be stable some (most?) current implementations seem to just zero it out. PR: kern/88664 Reported by: jylefort Submitted by: Joost Bekkers (w/ changes) Tested by "regisr" <regisrApoboxDcom>
2006-05-14 23:42:24 +00:00
(id->src_ip6.__u6_addr.__u6_addr32[2]) ^
(id->src_ip6.__u6_addr.__u6_addr32[3]) ^
(id->dst_port) ^ (id->src_port);
Fix indentation in INET6 section in preperation of more serious work. Approved by: re (blanket ip6fw removal)
2005-06-16 13:20:36 +00:00
return i;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
static int
is_icmp6_query(int icmp6_type)
{
if ((icmp6_type <= ICMP6_MAXTYPE) &&
(icmp6_type == ICMP6_ECHO_REQUEST ||
icmp6_type == ICMP6_MEMBERSHIP_QUERY ||
icmp6_type == ICMP6_WRUREQUEST ||
icmp6_type == ICMP6_FQDN_QUERY ||
icmp6_type == ICMP6_NI_QUERY))
return (1);
return (0);
}
static void
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
send_reject6(struct ip_fw_args *args, int code, u_int hlen, struct ip6_hdr *ip6)
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
{
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
struct mbuf *m;
m = args->m;
Eliminate the offset argument from send_reject. It's not been used since FreeBSD-SA-06:04.ipfw. Adopt send_reject6 to what had been done for legacy IP: no longer send or permit sending rejects for any but the first fragment. Discussed with: oleg, csjp (some weeks ago)
2006-06-29 11:17:16 +00:00
if (code == ICMP6_UNREACH_RST && args->f_id.proto == IPPROTO_TCP) {
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
struct tcphdr *tcp;
tcp_seq ack, seq;
int flags;
struct {
struct ip6_hdr ip6;
struct tcphdr th;
} ti;
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
tcp = (struct tcphdr *)((char *)ip6 + hlen);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
if ((tcp->th_flags & TH_RST) != 0) {
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
m_freem(m);
args->m = NULL;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
return;
}
ti.ip6 = *ip6;
ti.th = *tcp;
ti.th.th_seq = ntohl(ti.th.th_seq);
ti.th.th_ack = ntohl(ti.th.th_ack);
ti.ip6.ip6_nxt = IPPROTO_TCP;
if (ti.th.th_flags & TH_ACK) {
ack = 0;
seq = ti.th.th_ack;
flags = TH_RST;
} else {
ack = ti.th.th_seq;
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
if ((m->m_flags & M_PKTHDR) != 0) {
/*
* total new data to ACK is:
* total packet length,
* minus the header length,
* minus the tcp header length.
*/
ack += m->m_pkthdr.len - hlen
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
- (ti.th.th_off << 2);
} else if (ip6->ip6_plen) {
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
ack += ntohs(ip6->ip6_plen) + sizeof(*ip6) -
hlen - (ti.th.th_off << 2);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
} else {
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
m_freem(m);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
return;
}
if (tcp->th_flags & TH_SYN)
ack++;
seq = 0;
flags = TH_RST|TH_ACK;
}
bcopy(&ti, ip6, sizeof(ti));
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
/*
* m is only used to recycle the mbuf
* The data in it is never read so we don't need
* to correct the offsets or anything
*/
tcp_respond(NULL, ip6, tcp, m, ack, seq, flags);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
} else if (code != ICMP6_UNREACH_RST) { /* Send an ICMPv6 unreach. */
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
#if 0
/*
* Unlike above, the mbufs need to line up with the ip6 hdr,
* as the contents are read. We need to m_adj() the
* needed amount.
* The mbuf will however be thrown away so we can adjust it.
* Remember we did an m_pullup on it already so we
* can make some assumptions about contiguousness.
*/
if (args->L3offset)
m_adj(m, args->L3offset);
#endif
icmp6_error(m, ICMP6_DST_UNREACH, code, 0);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
} else
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
m_freem(m);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
args->m = NULL;
}
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#endif /* INET6 */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
static u_int64_t norule_counter; /* counter for ipfw_log(NULL...) */
#define SNPARGS(buf, len) buf + len, sizeof(buf) > len ? sizeof(buf) - len : 0
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
#define SNP(buf) buf, sizeof(buf)
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* We enter here when we have a rule with O_LOG.
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
* XXX this function alone takes about 2Kbytes of code!
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
static void
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
ipfw_log(struct ip_fw *f, u_int hlen, struct ip_fw_args *args,
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
struct mbuf *m, struct ifnet *oif, u_short offset, uint32_t tablearg,
struct ip *ip)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
struct ether_header *eh = args->eh;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
char *action;
int limit_reached = 0;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
char action2[40], proto[128], fragment[32];
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
fragment[0] = '\0';
proto[0] = '\0';
if (f == NULL) { /* bogus pkt */
if (verbose_limit != 0 && norule_counter >= verbose_limit)
return;
norule_counter++;
if (norule_counter == verbose_limit)
limit_reached = verbose_limit;
action = "Refuse";
} else { /* O_LOG is the first action, find the real one */
ipfw_insn *cmd = ACTION_PTR(f);
ipfw_insn_log *l = (ipfw_insn_log *)cmd;
if (l->max_log != 0 && l->log_left == 0)
return;
l->log_left--;
if (l->log_left == 0)
limit_reached = l->max_log;
cmd += F_LEN(cmd); /* point to first action */
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
if (cmd->opcode == O_ALTQ) {
ipfw_insn_altq *altq = (ipfw_insn_altq *)cmd;
snprintf(SNPARGS(action2, 0), "Altq %d",
altq->qid);
cmd += F_LEN(cmd);
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (cmd->opcode == O_PROB)
cmd += F_LEN(cmd);
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
if (cmd->opcode == O_TAG)
cmd += F_LEN(cmd);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
action = action2;
switch (cmd->opcode) {
case O_DENY:
action = "Deny";
break;
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_REJECT:
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
if (cmd->arg1==ICMP_REJECT_RST)
action = "Reset";
else if (cmd->arg1==ICMP_UNREACH_HOST)
action = "Reject";
else
snprintf(SNPARGS(action2, 0), "Unreach %d",
cmd->arg1);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case O_UNREACH6:
if (cmd->arg1==ICMP6_UNREACH_RST)
action = "Reset";
else
snprintf(SNPARGS(action2, 0), "Unreach %d",
cmd->arg1);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_ACCEPT:
action = "Accept";
break;
case O_COUNT:
action = "Count";
break;
case O_DIVERT:
snprintf(SNPARGS(action2, 0), "Divert %d",
cmd->arg1);
break;
case O_TEE:
snprintf(SNPARGS(action2, 0), "Tee %d",
cmd->arg1);
break;
case O_SKIPTO:
snprintf(SNPARGS(action2, 0), "SkipTo %d",
cmd->arg1);
break;
case O_PIPE:
snprintf(SNPARGS(action2, 0), "Pipe %d",
cmd->arg1);
break;
case O_QUEUE:
snprintf(SNPARGS(action2, 0), "Queue %d",
cmd->arg1);
break;
case O_FORWARD_IP: {
ipfw_insn_sa *sa = (ipfw_insn_sa *)cmd;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
int len;
Allow ipfw to forward to a destination that is specified by a table. for example: fwd tablearg ip from any to table(1) where table 1 has entries of the form: 1.1.1.0/24 10.2.3.4 208.23.2.0/24 router2 This allows trivial implementation of a secondary routing table implemented in the firewall layer. I expect more work (under discussion with Glebius) to follow this to clean up some of the messy parts of ipfw related to tables. Reviewed by: Glebius MFC after: 1 month
2006-08-17 22:49:50 +00:00
struct in_addr dummyaddr;
if (sa->sa.sin_addr.s_addr == INADDR_ANY)
dummyaddr.s_addr = htonl(tablearg);
else
dummyaddr.s_addr = sa->sa.sin_addr.s_addr;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
len = snprintf(SNPARGS(action2, 0), "Forward to %s",
Allow ipfw to forward to a destination that is specified by a table. for example: fwd tablearg ip from any to table(1) where table 1 has entries of the form: 1.1.1.0/24 10.2.3.4 208.23.2.0/24 router2 This allows trivial implementation of a secondary routing table implemented in the firewall layer. I expect more work (under discussion with Glebius) to follow this to clean up some of the messy parts of ipfw related to tables. Reviewed by: Glebius MFC after: 1 month
2006-08-17 22:49:50 +00:00
inet_ntoa(dummyaddr));
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (sa->sa.sin_port)
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
snprintf(SNPARGS(action2, len), ":%d",
o Fix byte order logging issue: sa.sin_port is already in host byte order. PR: kern/45964 Submitted by: Sascha Blank <sblank@tiscali.de> Reviewed by: luigi MFC after: 1 week
2002-12-15 09:44:02 +00:00
sa->sa.sin_port);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
break;
Add a ng_ipfw node, implementing a quick and simple interface between ipfw(4) and netgraph(4) facilities. Reviewed by: andre, brooks, julian
2005-02-05 12:06:33 +00:00
case O_NETGRAPH:
snprintf(SNPARGS(action2, 0), "Netgraph %d",
cmd->arg1);
break;
case O_NGTEE:
snprintf(SNPARGS(action2, 0), "Ngtee %d",
cmd->arg1);
break;
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
case O_NAT:
action = "Nat";
break;
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
default:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
action = "UNKNOWN";
break;
}
}
if (hlen == 0) { /* non-ip */
snprintf(SNPARGS(proto, 0), "MAC");
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
} else {
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
int len;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
char src[48], dst[48];
struct icmphdr *icmp;
struct tcphdr *tcp;
struct udphdr *udp;
#ifdef INET6
struct ip6_hdr *ip6 = NULL;
struct icmp6_hdr *icmp6;
#endif
src[0] = '\0';
dst[0] = '\0';
#ifdef INET6
o Do not do args->f_id.addr_type == 6 when there is IS_IP6_FLOW_ID() exactly for that.
2006-10-11 12:14:28 +00:00
if (IS_IP6_FLOW_ID(&(args->f_id))) {
MFp4: 92972, 98913 + one more change In ip6_sprintf no longer use and return one of eight static buffers for printing/logging ipv6 addresses. The caller now has to hand in a sufficiently large buffer as first argument.
2006-12-12 12:17:58 +00:00
char ip6buf[INET6_ADDRSTRLEN];
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
snprintf(src, sizeof(src), "[%s]",
MFp4: 92972, 98913 + one more change In ip6_sprintf no longer use and return one of eight static buffers for printing/logging ipv6 addresses. The caller now has to hand in a sufficiently large buffer as first argument.
2006-12-12 12:17:58 +00:00
ip6_sprintf(ip6buf, &args->f_id.src_ip6));
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
snprintf(dst, sizeof(dst), "[%s]",
MFp4: 92972, 98913 + one more change In ip6_sprintf no longer use and return one of eight static buffers for printing/logging ipv6 addresses. The caller now has to hand in a sufficiently large buffer as first argument.
2006-12-12 12:17:58 +00:00
ip6_sprintf(ip6buf, &args->f_id.dst_ip6));
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
ip6 = (struct ip6_hdr *)ip;
tcp = (struct tcphdr *)(((char *)ip) + hlen);
udp = (struct udphdr *)(((char *)ip) + hlen);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
} else
#endif
{
tcp = L3HDR(struct tcphdr, ip);
udp = L3HDR(struct udphdr, ip);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
inet_ntoa_r(ip->ip_src, src);
inet_ntoa_r(ip->ip_dst, dst);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
switch (args->f_id.proto) {
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case IPPROTO_TCP:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
len = snprintf(SNPARGS(proto, 0), "TCP %s", src);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (offset == 0)
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
snprintf(SNPARGS(proto, len), ":%d %s:%d",
ntohs(tcp->th_sport),
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
dst,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
ntohs(tcp->th_dport));
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
else
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
snprintf(SNPARGS(proto, len), " %s", dst);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
case IPPROTO_UDP:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
len = snprintf(SNPARGS(proto, 0), "UDP %s", src);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (offset == 0)
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
snprintf(SNPARGS(proto, len), ":%d %s:%d",
ntohs(udp->uh_sport),
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
dst,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
ntohs(udp->uh_dport));
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
else
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
snprintf(SNPARGS(proto, len), " %s", dst);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
case IPPROTO_ICMP:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
icmp = L3HDR(struct icmphdr, ip);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (offset == 0)
len = snprintf(SNPARGS(proto, 0),
"ICMP:%u.%u ",
icmp->icmp_type, icmp->icmp_code);
else
len = snprintf(SNPARGS(proto, 0), "ICMP ");
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
len += snprintf(SNPARGS(proto, len), "%s", src);
snprintf(SNPARGS(proto, len), " %s", dst);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
#ifdef INET6
case IPPROTO_ICMPV6:
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
icmp6 = (struct icmp6_hdr *)(((char *)ip) + hlen);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
if (offset == 0)
len = snprintf(SNPARGS(proto, 0),
"ICMPv6:%u.%u ",
icmp6->icmp6_type, icmp6->icmp6_code);
else
len = snprintf(SNPARGS(proto, 0), "ICMPv6 ");
len += snprintf(SNPARGS(proto, len), "%s", src);
snprintf(SNPARGS(proto, len), " %s", dst);
break;
#endif
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
len = snprintf(SNPARGS(proto, 0), "P:%d %s",
args->f_id.proto, src);
snprintf(SNPARGS(proto, len), " %s", dst);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
}
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
#ifdef INET6
o Do not do args->f_id.addr_type == 6 when there is IS_IP6_FLOW_ID() exactly for that.
2006-10-11 12:14:28 +00:00
if (IS_IP6_FLOW_ID(&(args->f_id))) {
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
if (offset & (IP6F_OFF_MASK | IP6F_MORE_FRAG))
snprintf(SNPARGS(fragment, 0),
" (frag %08x:%d@%d%s)",
args->f_id.frag_id6,
ntohs(ip6->ip6_plen) - hlen,
ntohs(offset & IP6F_OFF_MASK) << 3,
(offset & IP6F_MORE_FRAG) ? "+" : "");
} else
#endif
{
int ip_off, ip_len;
if (eh != NULL) { /* layer 2 packets are as on the wire */
ip_off = ntohs(ip->ip_off);
ip_len = ntohs(ip->ip_len);
} else {
ip_off = ip->ip_off;
ip_len = ip->ip_len;
}
if (ip_off & (IP_MF | IP_OFFMASK))
snprintf(SNPARGS(fragment, 0),
" (frag %d:%d@%d%s)",
ntohs(ip->ip_id), ip_len - (ip->ip_hl << 2),
offset << 3,
(ip_off & IP_MF) ? "+" : "");
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
if (oif || m->m_pkthdr.rcvif)
log(LOG_SECURITY | LOG_INFO,
Replace the if_name and if_unit members of struct ifnet with new members if_xname, if_dname, and if_dunit. if_xname is the name of the interface and if_dname/unit are the driver name and instance. This change paves the way for interface renaming and enhanced pseudo device creation and configuration symantics. Approved By: re (in principle) Reviewed By: njl, imp Tested On: i386, amd64, sparc64 Obtained From: NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
"ipfw: %d %s %s %s via %s%s\n",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
f ? f->rulenum : -1,
action, proto, oif ? "out" : "in",
Replace the if_name and if_unit members of struct ifnet with new members if_xname, if_dname, and if_dunit. if_xname is the name of the interface and if_dname/unit are the driver name and instance. This change paves the way for interface renaming and enhanced pseudo device creation and configuration symantics. Approved By: re (in principle) Reviewed By: njl, imp Tested On: i386, amd64, sparc64 Obtained From: NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
oif ? oif->if_xname : m->m_pkthdr.rcvif->if_xname,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
fragment);
else
log(LOG_SECURITY | LOG_INFO,
"ipfw: %d %s %s [no if info]%s\n",
f ? f->rulenum : -1,
action, proto, fragment);
if (limit_reached)
log(LOG_SECURITY | LOG_NOTICE,
"ipfw: limit %d reached on entry %d\n",
limit_reached, f ? f->rulenum : -1);
}
/*
* IMPORTANT: the hash function for dynamic rules must be commutative
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
* in source and destination (ip,port), because rules are bidirectional
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* and we want to find both in the same bucket.
*/
static __inline int
hash_packet(struct ipfw_flow_id *id)
{
u_int32_t i;
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#ifdef INET6
if (IS_IP6_FLOW_ID(id))
typo
2005-04-19 10:04:38 +00:00
i = hash_packet6(id);
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
else
#endif /* INET6 */
i = (id->dst_ip) ^ (id->src_ip) ^ (id->dst_port) ^ (id->src_port);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
i &= (curr_dyn_buckets - 1);
return i;
}
/**
* unlink a dynamic rule from a chain. prev is a pointer to
* the previous one, q is a pointer to the rule to delete,
* head is a pointer to the head of the queue.
* Modifies q and potentially also head.
*/
#define UNLINK_DYN_RULE(prev, head, q) { \
ipfw_dyn_rule *old_q = q; \
\
/* remove a refcount to the parent */ \
if (q->dyn_type == O_LIMIT) \
q->parent->count--; \
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
DEB(printf("ipfw: unlink entry 0x%08x %d -> 0x%08x %d, %d left\n",\
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
(q->id.src_ip), (q->id.src_port), \
(q->id.dst_ip), (q->id.dst_port), dyn_count-1 ); ) \
if (prev != NULL) \
prev->next = q = q->next; \
else \
head = q = q->next; \
dyn_count--; \
Change the state allocator from using regular malloc to using a UMA zone instead. This should eliminate a bit of the locking overhead associated with with malloc and reduce the memory consumption associated with each new state. Reviewed by: rwatson, andre Silence on: ipfw@ MFC after: 1 week
2005-01-31 00:48:39 +00:00
uma_zfree(ipfw_dyn_rule_zone, old_q); }
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#define TIME_LEQ(a,b) ((int)((a)-(b)) <= 0)
/**
* Remove dynamic rules pointing to "rule", or all of them if rule == NULL.
*
* If keep_me == NULL, rules are deleted even if not expired,
* otherwise only expired rules are removed.
*
* The value of the second parameter is also used to point to identify
* a rule we absolutely do not want to remove (e.g. because we are
* holding a reference to it -- this is the case with O_LIMIT_PARENT
* rules). The pointer is only used for comparison, so any non-null
* value will do.
*/
static void
remove_dyn_rule(struct ip_fw *rule, ipfw_dyn_rule *keep_me)
{
static u_int32_t last_remove = 0;
#define FORCE (keep_me == NULL)
ipfw_dyn_rule *prev, *q;
int i, pass = 0, max_pass = 0;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK_ASSERT();
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (ipfw_dyn_v == NULL || dyn_count == 0)
return;
/* do not expire more than once per second, it is useless */
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (!FORCE && last_remove == time_uptime)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
last_remove = time_uptime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* because O_LIMIT refer to parent rules, during the first pass only
* remove child and mark any pending LIMIT_PARENT, and remove
* them in a second pass.
*/
next_pass:
for (i = 0 ; i < curr_dyn_buckets ; i++) {
for (prev=NULL, q = ipfw_dyn_v[i] ; q ; ) {
/*
* Logic can become complex here, so we split tests.
*/
if (q == keep_me)
goto next;
if (rule != NULL && rule != q->rule)
goto next; /* not the one we are looking for */
if (q->dyn_type == O_LIMIT_PARENT) {
/*
* handle parent in the second pass,
* record we need one.
*/
max_pass = 1;
if (pass == 0)
goto next;
if (FORCE && q->count != 0 ) {
/* XXX should not happen! */
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
printf("ipfw: OUCH! cannot remove rule,"
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
" count %d\n", q->count);
}
} else {
if (!FORCE &&
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
!TIME_LEQ( q->expire, time_uptime ))
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
goto next;
}
Malloc buckets of size 128 have been having their 64-byte offset trashed after being freed. This has caused several panics including kern/42277 related to soft updates. Jim Kuhn tracked the problem down to ipfw limit rule processing. In the expiry of dynamic rules, it is possible for an O_LIMIT_PARENT rule to be removed when it still has live children. When the children eventually do expire, a pointer to the (long gone) parent is dereferenced and a count decremented. Since this memory can, and is, allocated for other purposes (in the case of kern/42277 an inodedep structure), chaos ensues. The offset in question in inodedep is the offset of the 16 bit count field in the ipfw2 ipfw_dyn_rule. Submitted by: Jim Kuhn <jkuhn@sandvine.com> Reviewed by: "Evgueni V. Gavrilov" <aquatique@rusunix.org> Reviewed by: Ben Pfountz <netprince@vt.edu> MFC after: 1 week
2003-10-16 02:00:12 +00:00
if (q->dyn_type != O_LIMIT_PARENT || !q->count) {
UNLINK_DYN_RULE(prev, ipfw_dyn_v[i], q);
continue;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
next:
prev=q;
q=q->next;
}
}
if (pass++ < max_pass)
goto next_pass;
}
/**
* lookup a dynamic rule.
*/
static ipfw_dyn_rule *
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
lookup_dyn_rule_locked(struct ipfw_flow_id *pkt, int *match_direction,
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
struct tcphdr *tcp)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
/*
* stateful ipfw extensions.
* Lookup into dynamic session queue
*/
#define MATCH_REVERSE 0
#define MATCH_FORWARD 1
#define MATCH_NONE 2
#define MATCH_UNKNOWN 3
int i, dir = MATCH_NONE;
ipfw_dyn_rule *prev, *q=NULL;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK_ASSERT();
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (ipfw_dyn_v == NULL)
goto done; /* not found */
i = hash_packet( pkt );
for (prev=NULL, q = ipfw_dyn_v[i] ; q != NULL ; ) {
Malloc buckets of size 128 have been having their 64-byte offset trashed after being freed. This has caused several panics including kern/42277 related to soft updates. Jim Kuhn tracked the problem down to ipfw limit rule processing. In the expiry of dynamic rules, it is possible for an O_LIMIT_PARENT rule to be removed when it still has live children. When the children eventually do expire, a pointer to the (long gone) parent is dereferenced and a count decremented. Since this memory can, and is, allocated for other purposes (in the case of kern/42277 an inodedep structure), chaos ensues. The offset in question in inodedep is the offset of the 16 bit count field in the ipfw2 ipfw_dyn_rule. Submitted by: Jim Kuhn <jkuhn@sandvine.com> Reviewed by: "Evgueni V. Gavrilov" <aquatique@rusunix.org> Reviewed by: Ben Pfountz <netprince@vt.edu> MFC after: 1 week
2003-10-16 02:00:12 +00:00
if (q->dyn_type == O_LIMIT_PARENT && q->count)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
goto next;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (TIME_LEQ( q->expire, time_uptime)) { /* expire entry */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
UNLINK_DYN_RULE(prev, ipfw_dyn_v[i], q);
continue;
}
Malloc buckets of size 128 have been having their 64-byte offset trashed after being freed. This has caused several panics including kern/42277 related to soft updates. Jim Kuhn tracked the problem down to ipfw limit rule processing. In the expiry of dynamic rules, it is possible for an O_LIMIT_PARENT rule to be removed when it still has live children. When the children eventually do expire, a pointer to the (long gone) parent is dereferenced and a count decremented. Since this memory can, and is, allocated for other purposes (in the case of kern/42277 an inodedep structure), chaos ensues. The offset in question in inodedep is the offset of the 16 bit count field in the ipfw2 ipfw_dyn_rule. Submitted by: Jim Kuhn <jkuhn@sandvine.com> Reviewed by: "Evgueni V. Gavrilov" <aquatique@rusunix.org> Reviewed by: Ben Pfountz <netprince@vt.edu> MFC after: 1 week
2003-10-16 02:00:12 +00:00
if (pkt->proto == q->id.proto &&
q->dyn_type != O_LIMIT_PARENT) {
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
if (IS_IP6_FLOW_ID(pkt)) {
if (IN6_ARE_ADDR_EQUAL(&(pkt->src_ip6),
&(q->id.src_ip6)) &&
IN6_ARE_ADDR_EQUAL(&(pkt->dst_ip6),
&(q->id.dst_ip6)) &&
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
pkt->src_port == q->id.src_port &&
pkt->dst_port == q->id.dst_port ) {
dir = MATCH_FORWARD;
break;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
if (IN6_ARE_ADDR_EQUAL(&(pkt->src_ip6),
&(q->id.dst_ip6)) &&
IN6_ARE_ADDR_EQUAL(&(pkt->dst_ip6),
&(q->id.src_ip6)) &&
pkt->src_port == q->id.dst_port &&
pkt->dst_port == q->id.src_port ) {
dir = MATCH_REVERSE;
break;
}
} else {
if (pkt->src_ip == q->id.src_ip &&
pkt->dst_ip == q->id.dst_ip &&
pkt->src_port == q->id.src_port &&
pkt->dst_port == q->id.dst_port ) {
dir = MATCH_FORWARD;
break;
}
if (pkt->src_ip == q->id.dst_ip &&
pkt->dst_ip == q->id.src_ip &&
pkt->src_port == q->id.dst_port &&
pkt->dst_port == q->id.src_port ) {
dir = MATCH_REVERSE;
break;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
}
next:
prev = q;
q = q->next;
}
if (q == NULL)
goto done; /* q = NULL, not found */
if ( prev != NULL) { /* found and not in front */
prev->next = q->next;
q->next = ipfw_dyn_v[i];
ipfw_dyn_v[i] = q;
}
if (pkt->proto == IPPROTO_TCP) { /* update state according to flags */
u_char flags = pkt->flags & (TH_FIN|TH_SYN|TH_RST);
#define BOTH_SYN (TH_SYN | (TH_SYN << 8))
#define BOTH_FIN (TH_FIN | (TH_FIN << 8))
q->state |= (dir == MATCH_FORWARD ) ? flags : (flags << 8);
switch (q->state) {
case TH_SYN: /* opening */
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_syn_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case BOTH_SYN: /* move to established */
case BOTH_SYN | TH_FIN : /* one side tries to close */
case BOTH_SYN | (TH_FIN << 8) :
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
if (tcp) {
#define _SEQ_GE(a,b) ((int)(a) - (int)(b) >= 0)
u_int32_t ack = ntohl(tcp->th_ack);
if (dir == MATCH_FORWARD) {
if (q->ack_fwd == 0 || _SEQ_GE(ack, q->ack_fwd))
q->ack_fwd = ack;
else { /* ignore out-of-sequence */
break;
}
} else {
if (q->ack_rev == 0 || _SEQ_GE(ack, q->ack_rev))
q->ack_rev = ack;
else { /* ignore out-of-sequence */
break;
}
}
}
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_ack_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case BOTH_SYN | BOTH_FIN: /* both sides closed */
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (dyn_fin_lifetime >= dyn_keepalive_period)
dyn_fin_lifetime = dyn_keepalive_period - 1;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_fin_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default:
#if 0
/*
* reset or some invalid combination, but can also
* occur if we use keep-state the wrong way.
*/
if ( (q->state & ((TH_RST << 8)|TH_RST)) == 0)
printf("invalid state: 0x%x\n", q->state);
#endif
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (dyn_rst_lifetime >= dyn_keepalive_period)
dyn_rst_lifetime = dyn_keepalive_period - 1;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_rst_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
}
} else if (pkt->proto == IPPROTO_UDP) {
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_udp_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
} else {
/* other protocols */
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_short_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
done:
if (match_direction)
*match_direction = dir;
return q;
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
static ipfw_dyn_rule *
lookup_dyn_rule(struct ipfw_flow_id *pkt, int *match_direction,
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
struct tcphdr *tcp)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
{
ipfw_dyn_rule *q;
IPFW_DYN_LOCK();
q = lookup_dyn_rule_locked(pkt, match_direction, tcp);
if (q == NULL)
IPFW_DYN_UNLOCK();
/* NB: return table locked when q is not NULL */
return q;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
static void
realloc_dynamic_table(void)
{
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK_ASSERT();
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
/*
* Try reallocation, make sure we have a power of 2 and do
* not allow more than 64k entries. In case of overflow,
* default to 1024.
*/
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (dyn_buckets > 65536)
dyn_buckets = 1024;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if ((dyn_buckets & (dyn_buckets-1)) != 0) { /* not a power of 2 */
dyn_buckets = curr_dyn_buckets; /* reset */
return;
}
curr_dyn_buckets = dyn_buckets;
if (ipfw_dyn_v != NULL)
free(ipfw_dyn_v, M_IPFW);
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
for (;;) {
ipfw_dyn_v = malloc(curr_dyn_buckets * sizeof(ipfw_dyn_rule *),
Several malloc() calls were passing the M_DONTWAIT flag which is an mbuf allocation flag. Use the correct M_NOWAIT malloc() flag. Fortunately, both were defined to 1, so this commit is a no-op.
2002-10-19 11:31:50 +00:00
M_IPFW, M_NOWAIT | M_ZERO);
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (ipfw_dyn_v != NULL || curr_dyn_buckets <= 2)
break;
curr_dyn_buckets /= 2;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
/**
* Install state of type 'type' for a dynamic session.
* The hash table contains two type of rules:
* - regular rules (O_KEEP_STATE)
* - rules for sessions with limited number of sess per user
* (O_LIMIT). When they are created, the parent is
* increased by 1, and decreased on delete. In this case,
* the third parameter is the parent rule and not the chain.
* - "parent" rules for the above (O_LIMIT_PARENT).
*/
static ipfw_dyn_rule *
add_dyn_rule(struct ipfw_flow_id *id, u_int8_t dyn_type, struct ip_fw *rule)
{
ipfw_dyn_rule *r;
int i;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK_ASSERT();
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (ipfw_dyn_v == NULL ||
(dyn_count == 0 && dyn_buckets != curr_dyn_buckets)) {
realloc_dynamic_table();
if (ipfw_dyn_v == NULL)
return NULL; /* failed ! */
}
i = hash_packet(id);
Change the state allocator from using regular malloc to using a UMA zone instead. This should eliminate a bit of the locking overhead associated with with malloc and reduce the memory consumption associated with each new state. Reviewed by: rwatson, andre Silence on: ipfw@ MFC after: 1 week
2005-01-31 00:48:39 +00:00
r = uma_zalloc(ipfw_dyn_rule_zone, M_NOWAIT | M_ZERO);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (r == NULL) {
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
printf ("ipfw: sorry cannot allocate state\n");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return NULL;
}
/* increase refcount on parent, and set pointer */
if (dyn_type == O_LIMIT) {
ipfw_dyn_rule *parent = (ipfw_dyn_rule *)rule;
if ( parent->dyn_type != O_LIMIT_PARENT)
panic("invalid parent");
parent->count++;
r->parent = parent;
rule = parent->rule;
}
r->id = *id;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
r->expire = time_uptime + dyn_syn_lifetime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
r->rule = rule;
r->dyn_type = dyn_type;
r->pcnt = r->bcnt = 0;
r->count = 0;
r->bucket = i;
r->next = ipfw_dyn_v[i];
ipfw_dyn_v[i] = r;
dyn_count++;
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
DEB(printf("ipfw: add dyn entry ty %d 0x%08x %d -> 0x%08x %d, total %d\n",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
dyn_type,
(r->id.src_ip), (r->id.src_port),
(r->id.dst_ip), (r->id.dst_port),
dyn_count ); )
return r;
}
/**
* lookup dynamic parent rule using pkt and rule as search keys.
* If the lookup fails, then install one.
*/
static ipfw_dyn_rule *
lookup_dyn_parent(struct ipfw_flow_id *pkt, struct ip_fw *rule)
{
ipfw_dyn_rule *q;
int i;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK_ASSERT();
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (ipfw_dyn_v) {
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
int is_v6 = IS_IP6_FLOW_ID(pkt);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
i = hash_packet( pkt );
for (q = ipfw_dyn_v[i] ; q != NULL ; q=q->next)
if (q->dyn_type == O_LIMIT_PARENT &&
rule== q->rule &&
pkt->proto == q->id.proto &&
pkt->src_port == q->id.src_port &&
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
pkt->dst_port == q->id.dst_port &&
(
(is_v6 &&
IN6_ARE_ADDR_EQUAL(&(pkt->src_ip6),
&(q->id.src_ip6)) &&
IN6_ARE_ADDR_EQUAL(&(pkt->dst_ip6),
&(q->id.dst_ip6))) ||
(!is_v6 &&
pkt->src_ip == q->id.src_ip &&
pkt->dst_ip == q->id.dst_ip)
)
) {
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
q->expire = time_uptime + dyn_short_lifetime;
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
DEB(printf("ipfw: lookup_dyn_parent found 0x%p\n",q);)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return q;
}
}
return add_dyn_rule(pkt, O_LIMIT_PARENT, rule);
}
/**
* Install dynamic state for rule type cmd->o.opcode
*
* Returns 1 (failure) if state is not installed because of errors or because
* session limitations are enforced.
*/
static int
install_state(struct ip_fw *rule, ipfw_insn_limit *cmd,
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
struct ip_fw_args *args, uint32_t tablearg)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
static int last_log;
ipfw_dyn_rule *q;
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
struct in_addr da;
char src[48], dst[48];
src[0] = '\0';
dst[0] = '\0';
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
DEB(
printf("ipfw: %s: type %d 0x%08x %u -> 0x%08x %u\n",
__func__, cmd->o.opcode,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
(args->f_id.src_ip), (args->f_id.src_port),
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
(args->f_id.dst_ip), (args->f_id.dst_port));
)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK();
q = lookup_dyn_rule_locked(&args->f_id, NULL, NULL);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
if (q != NULL) { /* should never occur */
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (last_log != time_uptime) {
last_log = time_uptime;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
printf("ipfw: %s: entry already present, done\n",
__func__);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
return (0);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
if (dyn_count >= dyn_max)
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
/* Run out of slots, try to remove any expired rule. */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
remove_dyn_rule(NULL, (ipfw_dyn_rule *)1);
if (dyn_count >= dyn_max) {
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (last_log != time_uptime) {
last_log = time_uptime;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
printf("ipfw: %s: Too many dynamic rules\n", __func__);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
return (1); /* cannot install, notify caller */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
switch (cmd->o.opcode) {
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
case O_KEEP_STATE: /* bidir rule */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
add_dyn_rule(&args->f_id, O_KEEP_STATE, rule);
break;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
case O_LIMIT: { /* limit number of sessions */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
struct ipfw_flow_id id;
ipfw_dyn_rule *parent;
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
uint32_t conn_limit;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
uint16_t limit_mask = cmd->limit_mask;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
conn_limit = (cmd->conn_limit == IP_FW_TABLEARG) ?
tablearg : cmd->conn_limit;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
DEB(
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
if (cmd->conn_limit == IP_FW_TABLEARG)
printf("ipfw: %s: O_LIMIT rule, conn_limit: %u "
"(tablearg)\n", __func__, conn_limit);
else
printf("ipfw: %s: O_LIMIT rule, conn_limit: %u\n",
__func__, conn_limit);
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
id.dst_ip = id.src_ip = id.dst_port = id.src_port = 0;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
id.proto = args->f_id.proto;
install_state() should properly initialize 'addr_type' field of newly created flows for O_LIMIT rules. Otherwise 'ipfw -d show' is unable to display PARENT rules properly. (This bug was exposed by ipfw2.c rev.1.90) Approved by: glebius (mentor) MFC after: 2 weeks
2006-06-08 11:27:45 +00:00
id.addr_type = args->f_id.addr_type;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
if (IS_IP6_FLOW_ID (&(args->f_id))) {
if (limit_mask & DYN_SRC_ADDR)
id.src_ip6 = args->f_id.src_ip6;
if (limit_mask & DYN_DST_ADDR)
id.dst_ip6 = args->f_id.dst_ip6;
} else {
if (limit_mask & DYN_SRC_ADDR)
id.src_ip = args->f_id.src_ip;
if (limit_mask & DYN_DST_ADDR)
id.dst_ip = args->f_id.dst_ip;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (limit_mask & DYN_SRC_PORT)
id.src_port = args->f_id.src_port;
if (limit_mask & DYN_DST_PORT)
id.dst_port = args->f_id.dst_port;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
if ((parent = lookup_dyn_parent(&id, rule)) == NULL) {
printf("ipfw: %s: add parent failed\n", __func__);
clear lock on error in O_LIMIT case of install_state Submitted by: Ted Unangst MFC after: 3 days
2005-09-04 17:33:40 +00:00
IPFW_DYN_UNLOCK();
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
return (1);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
if (parent->count >= conn_limit) {
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
/* See if we can remove some expired rule. */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
remove_dyn_rule(rule, parent);
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
if (parent->count >= conn_limit) {
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (fw_verbose && last_log != time_uptime) {
last_log = time_uptime;
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
#ifdef INET6
/*
* XXX IPv6 flows are not
* supported yet.
o Kill a nit in the comment.
2006-10-11 12:00:53 +00:00
*/
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
if (IS_IP6_FLOW_ID(&(args->f_id))) {
MFp4: 92972, 98913 + one more change In ip6_sprintf no longer use and return one of eight static buffers for printing/logging ipv6 addresses. The caller now has to hand in a sufficiently large buffer as first argument.
2006-12-12 12:17:58 +00:00
char ip6buf[INET6_ADDRSTRLEN];
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
snprintf(src, sizeof(src),
MFp4: 92972, 98913 + one more change In ip6_sprintf no longer use and return one of eight static buffers for printing/logging ipv6 addresses. The caller now has to hand in a sufficiently large buffer as first argument.
2006-12-12 12:17:58 +00:00
"[%s]", ip6_sprintf(ip6buf,
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
&args->f_id.src_ip6));
snprintf(dst, sizeof(dst),
MFp4: 92972, 98913 + one more change In ip6_sprintf no longer use and return one of eight static buffers for printing/logging ipv6 addresses. The caller now has to hand in a sufficiently large buffer as first argument.
2006-12-12 12:17:58 +00:00
"[%s]", ip6_sprintf(ip6buf,
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
&args->f_id.dst_ip6));
} else
#endif
{
da.s_addr =
htonl(args->f_id.src_ip);
inet_ntoa_r(da, src);
da.s_addr =
htonl(args->f_id.dst_ip);
inet_ntoa_r(da, dst);
}
Lower a priority of "session drop" messages. Requested by: Eugene Grosbein <eugen@kuzbass.ru> MFC after: 3 days
2002-10-29 08:53:14 +00:00
log(LOG_SECURITY | LOG_DEBUG,
o For dynamic rules log a parent rule number. Prefix a log message by 'ipfw: '. PR: kern/115755 Submitted by: sem Approved by: re (gnn) MFC after: 4 weeks
2007-09-29 15:01:41 +00:00
"ipfw: %d %s %s:%u -> %s:%u, %s\n",
parent->rule->rulenum,
o Extend not very informative ipfw(4) message 'drop session, too many entries' by src:port and dst:port pairs. IPv6 part is non-functional as ``limit'' does not support IPv6 flows. PR: kern/103967 Submitted by: based on Bruce Campbell patch MFC after: 1 month
2006-10-11 11:52:34 +00:00
"drop session",
src, (args->f_id.src_port),
dst, (args->f_id.dst_port),
"too many entries");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
return (1);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
}
add_dyn_rule(&args->f_id, O_LIMIT, (struct ip_fw *)parent);
break;
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default:
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
printf("ipfw: %s: unknown dynamic rule type %u\n",
__func__, cmd->o.opcode);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
return (1);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
/* XXX just set lifetime */
lookup_dyn_rule_locked(&args->f_id, NULL, NULL);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
install_state(): style(9) cleanup Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 08:54:29 +00:00
return (0);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
/*
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
* Generate a TCP packet, containing either a RST or a keepalive.
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
* When flags & TH_RST, we are sending a RST packet, because of a
* "reset" action matched the packet.
* Otherwise we are sending a keepalive, and flags & TH_
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
* The 'replyto' mbuf is the mbuf being replied to, if any, and is required
* so that MAC can label the reply appropriately.
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
*/
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
static struct mbuf *
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
send_pkt(struct mbuf *replyto, struct ipfw_flow_id *id, u_int32_t seq,
u_int32_t ack, int flags)
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
{
struct mbuf *m;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
struct ip *ip;
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
struct tcphdr *tcp;
Retire MT_HEADER mbuf type and change its users to use MT_DATA. Having an additional MT_HEADER mbuf type is superfluous and redundant as nothing depends on it. It only adds a layer of confusion. The distinction between header mbuf's and data mbuf's is solely done through the m->m_flags M_PKTHDR flag. Non-native code is not changed in this commit. For compatibility MT_HEADER is mapped to MT_DATA. Sponsored by: TCP/IP Optimization Fundraise 2005
2005-11-02 13:46:32 +00:00
MGETHDR(m, M_DONTWAIT, MT_DATA);
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
if (m == 0)
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
return (NULL);
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
m->m_pkthdr.rcvif = (struct ifnet *)0;
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
#ifdef MAC
if (replyto != NULL)
Continue to move from generic network entry points in the TrustedBSD MAC Framework by moving from mac_mbuf_create_netlayer() to more specific entry points for specific network services: - mac_netinet_firewall_reply() to be used when replying to in-bound TCP segments in pf and ipfw (etc). - Rename mac_netinet_icmp_reply() to mac_netinet_icmp_replyinplace() and add mac_netinet_icmp_reply(), reflecting that in some cases we overwrite a label in place, but in others we apply the label to a new mbuf. Obtained from: TrustedBSD Project
2007-10-28 17:12:48 +00:00
mac_netinet_firewall_reply(replyto, m);
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
else
Rename 'mac_mbuf_create_from_firewall' to 'mac_netinet_firewall_send' as we move towards netinet as a pseudo-object for the MAC Framework. Rename 'mac_create_mbuf_linklayer' to 'mac_mbuf_create_linklayer' to reflect general object-first ordering preference. Sponsored by: SPARTA (original patches against Mac OS X) Obtained from: TrustedBSD Project, Apple Computer
2007-10-26 13:18:38 +00:00
mac_netinet_firewall_send(m);
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
#else
(void)replyto; /* don't warn about unused arg */
#endif
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
m->m_pkthdr.len = m->m_len = sizeof(struct ip) + sizeof(struct tcphdr);
m->m_data += max_linkhdr;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
ip = mtod(m, struct ip *);
bzero(ip, m->m_len);
tcp = (struct tcphdr *)(ip + 1); /* no IP options */
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
ip->ip_p = IPPROTO_TCP;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
tcp->th_off = 5;
/*
* Assume we are sending a RST (or a keepalive in the reverse
* direction), swap src and destination addresses and ports.
*/
ip->ip_src.s_addr = htonl(id->dst_ip);
ip->ip_dst.s_addr = htonl(id->src_ip);
tcp->th_sport = htons(id->dst_port);
tcp->th_dport = htons(id->src_port);
if (flags & TH_RST) { /* we are sending a RST */
if (flags & TH_ACK) {
tcp->th_seq = htonl(ack);
tcp->th_ack = htonl(0);
tcp->th_flags = TH_RST;
} else {
if (flags & TH_SYN)
seq++;
tcp->th_seq = htonl(0);
tcp->th_ack = htonl(seq);
tcp->th_flags = TH_RST | TH_ACK;
}
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
} else {
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
/*
* We are sending a keepalive. flags & TH_SYN determines
* the direction, forward if set, reverse if clear.
* NOTE: seq and ack are always assumed to be correct
* as set by the caller. This may be confusing...
*/
if (flags & TH_SYN) {
/*
* we have to rewrite the correct addresses!
*/
ip->ip_dst.s_addr = htonl(id->dst_ip);
ip->ip_src.s_addr = htonl(id->src_ip);
tcp->th_dport = htons(id->dst_port);
tcp->th_sport = htons(id->src_port);
}
tcp->th_seq = htonl(seq);
tcp->th_ack = htonl(ack);
tcp->th_flags = TH_ACK;
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
}
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
/*
* set ip_len to the payload size so we can compute
* the tcp checksum on the pseudoheader
* XXX check this, could save a couple of words ?
*/
ip->ip_len = htons(sizeof(struct tcphdr));
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
tcp->th_sum = in_cksum(m, m->m_pkthdr.len);
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
/*
* now fill fields left out earlier
*/
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
ip->ip_ttl = ip_defttl;
ip->ip_len = m->m_pkthdr.len;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
m->m_flags |= M_SKIP_FIREWALL;
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
return (m);
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* sends a reject message, consuming the mbuf passed as an argument.
*/
static void
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
send_reject(struct ip_fw_args *args, int code, int ip_len, struct ip *ip)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
remove spurious printf
2002-08-13 19:13:23 +00:00
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
#if 0
/* XXX When ip is not guaranteed to be at mtod() we will
* need to account for this */
* The mbuf will however be thrown away so we can adjust it.
* Remember we did an m_pullup on it already so we
* can make some assumptions about contiguousness.
*/
if (args->L3offset)
m_adj(m, args->L3offset);
#endif
Bridged packets are supplied to the firewall with their IP header in network byte order, but icmp_error() expects the IP header to be in host order and the code here did not perform the necessary swapping for the bridged case. This bug causes an "icmp_error: bad length" panic when certain length IP packets (e.g. ip_len == 0x100) are rejected by the firewall with an ICMP response. MFC after: 3 days
2002-12-27 17:43:25 +00:00
if (code != ICMP_REJECT_RST) { /* Send an ICMP unreach */
/* We need the IP header in host order for icmp_error(). */
if (args->eh != NULL) {
ip->ip_len = ntohs(ip->ip_len);
ip->ip_off = ntohs(ip->ip_off);
}
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
icmp_error(args->m, ICMP_UNREACH, code, 0L, 0);
Eliminate the offset argument from send_reject. It's not been used since FreeBSD-SA-06:04.ipfw. Adopt send_reject6 to what had been done for legacy IP: no longer send or permit sending rejects for any but the first fragment. Discussed with: oleg, csjp (some weeks ago)
2006-06-29 11:17:16 +00:00
} else if (args->f_id.proto == IPPROTO_TCP) {
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
struct tcphdr *const tcp =
L3HDR(struct tcphdr, mtod(args->m, struct ip *));
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
if ( (tcp->th_flags & TH_RST) == 0) {
struct mbuf *m;
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
m = send_pkt(args->m, &(args->f_id),
ntohl(tcp->th_seq), ntohl(tcp->th_ack),
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
tcp->th_flags | TH_RST);
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
if (m != NULL)
ip_output(m, NULL, NULL, 0, NULL, NULL);
}
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
m_freem(args->m);
} else
m_freem(args->m);
args->m = NULL;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
/**
*
* Given an ip_fw *, lookup_next_rule will return a pointer
* to the next rule, which can be either the jump
* target (for skipto instructions) or the next one in the list (in
* all other cases including a missing jump target).
* The result is also written in the "next_rule" field of the rule.
* Backward jumps are not allowed, so start looking from the next
* rule...
*
* This never returns NULL -- in case we do not have an exact match,
* the next rule is returned. When the ruleset is changed,
* pointers are flushed so we are always correct.
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
*/
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
static struct ip_fw *
lookup_next_rule(struct ip_fw *me)
{
struct ip_fw *rule = NULL;
ipfw_insn *cmd;
/* look for action, in case it is a skipto */
cmd = ACTION_PTR(me);
If the first action is O_LOG adjust a pointer to the real one, unbreaks skipto + log rules. Reported by: Wiktor Niesiobedzki <w@evip.pl> MFC after: 1 week
2003-01-20 11:58:34 +00:00
if (cmd->opcode == O_LOG)
cmd += F_LEN(cmd);
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
if (cmd->opcode == O_ALTQ)
cmd += F_LEN(cmd);
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
if (cmd->opcode == O_TAG)
cmd += F_LEN(cmd);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if ( cmd->opcode == O_SKIPTO )
for (rule = me->next; rule ; rule = rule->next)
if (rule->rulenum >= cmd->arg1)
break;
if (rule == NULL) /* failure or not a skipto */
rule = me->next;
me->next_rule = rule;
return rule;
}
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
static int
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
add_table_entry(struct ip_fw_chain *ch, uint16_t tbl, in_addr_t addr,
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
uint8_t mlen, uint32_t value)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
struct radix_node_head *rnh;
struct table_entry *ent;
if (tbl >= IPFW_TABLES_MAX)
return (EINVAL);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
rnh = ch->tables[tbl];
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
ent = malloc(sizeof(*ent), M_IPFW_TBL, M_NOWAIT | M_ZERO);
if (ent == NULL)
return (ENOMEM);
ent->value = value;
ent->addr.sin_len = ent->mask.sin_len = 8;
ent->mask.sin_addr.s_addr = htonl(mlen ? ~((1 << (32 - mlen)) - 1) : 0);
ent->addr.sin_addr.s_addr = addr & ent->mask.sin_addr.s_addr;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WLOCK(&layer3_chain);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
if (rnh->rnh_addaddr(&ent->addr, &ent->mask, rnh, (void *)ent) ==
NULL) {
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WUNLOCK(&layer3_chain);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
free(ent, M_IPFW_TBL);
return (EEXIST);
}
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WUNLOCK(&layer3_chain);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
return (0);
}
static int
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
del_table_entry(struct ip_fw_chain *ch, uint16_t tbl, in_addr_t addr,
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
uint8_t mlen)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
struct radix_node_head *rnh;
struct table_entry *ent;
struct sockaddr_in sa, mask;
if (tbl >= IPFW_TABLES_MAX)
return (EINVAL);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
rnh = ch->tables[tbl];
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
sa.sin_len = mask.sin_len = 8;
mask.sin_addr.s_addr = htonl(mlen ? ~((1 << (32 - mlen)) - 1) : 0);
sa.sin_addr.s_addr = addr & mask.sin_addr.s_addr;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WLOCK(ch);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
ent = (struct table_entry *)rnh->rnh_deladdr(&sa, &mask, rnh);
if (ent == NULL) {
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WUNLOCK(ch);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
return (ESRCH);
}
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WUNLOCK(ch);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
free(ent, M_IPFW_TBL);
return (0);
}
static int
flush_table_entry(struct radix_node *rn, void *arg)
{
struct radix_node_head * const rnh = arg;
struct table_entry *ent;
ent = (struct table_entry *)
rnh->rnh_deladdr(rn->rn_key, rn->rn_mask, rnh);
if (ent != NULL)
free(ent, M_IPFW_TBL);
return (0);
}
static int
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
flush_table(struct ip_fw_chain *ch, uint16_t tbl)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
struct radix_node_head *rnh;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WLOCK_ASSERT(ch);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
if (tbl >= IPFW_TABLES_MAX)
return (EINVAL);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
rnh = ch->tables[tbl];
- Change the return type for init_tables from void to int so we can propagate errors from rn_inithead back to the ipfw initialization function. - Check return value of rn_inithead for failure, if table allocation has failed for any reason, free up any tables we have created and return ENOMEM - In ipfw_init check the return value of init_tables and free up any mutexes or UMA zones which may have been created. - Assert that the supplied table is not NULL before attempting to dereference. This fixes panics which were a result of invalid memory accesses due to failed table allocation. This is an issue mainly because the R_Zalloc function is a malloc(M_NOWAIT) wrapper, thus making it possible for allocations to fail. Found by: Coverity Prevent (tm) Coverity ID: CID79 MFC after: 1 week
2006-01-20 05:35:27 +00:00
KASSERT(rnh != NULL, ("NULL IPFW table"));
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
rnh->rnh_walktree(rnh, flush_table_entry, rnh);
return (0);
}
static void
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
flush_tables(struct ip_fw_chain *ch)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
uint16_t tbl;
IPFW_WLOCK_ASSERT(ch);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
for (tbl = 0; tbl < IPFW_TABLES_MAX; tbl++)
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
flush_table(ch, tbl);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
}
- Change the return type for init_tables from void to int so we can propagate errors from rn_inithead back to the ipfw initialization function. - Check return value of rn_inithead for failure, if table allocation has failed for any reason, free up any tables we have created and return ENOMEM - In ipfw_init check the return value of init_tables and free up any mutexes or UMA zones which may have been created. - Assert that the supplied table is not NULL before attempting to dereference. This fixes panics which were a result of invalid memory accesses due to failed table allocation. This is an issue mainly because the R_Zalloc function is a malloc(M_NOWAIT) wrapper, thus making it possible for allocations to fail. Found by: Coverity Prevent (tm) Coverity ID: CID79 MFC after: 1 week
2006-01-20 05:35:27 +00:00
static int
init_tables(struct ip_fw_chain *ch)
{
int i;
uint16_t j;
for (i = 0; i < IPFW_TABLES_MAX; i++) {
if (!rn_inithead((void **)&ch->tables[i], 32)) {
for (j = 0; j < i; j++) {
(void) flush_table(ch, j);
}
return (ENOMEM);
}
}
return (0);
}
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
static int
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
lookup_table(struct ip_fw_chain *ch, uint16_t tbl, in_addr_t addr,
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
uint32_t *val)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
struct radix_node_head *rnh;
struct table_entry *ent;
struct sockaddr_in sa;
if (tbl >= IPFW_TABLES_MAX)
return (0);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
rnh = ch->tables[tbl];
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
sa.sin_len = 8;
sa.sin_addr.s_addr = addr;
ent = (struct table_entry *)(rnh->rnh_lookup(&sa, NULL, rnh));
if (ent != NULL) {
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
*val = ent->value;
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
return (1);
}
return (0);
}
static int
count_table_entry(struct radix_node *rn, void *arg)
{
u_int32_t * const cnt = arg;
(*cnt)++;
return (0);
}
static int
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
count_table(struct ip_fw_chain *ch, uint32_t tbl, uint32_t *cnt)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
struct radix_node_head *rnh;
if (tbl >= IPFW_TABLES_MAX)
return (EINVAL);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
rnh = ch->tables[tbl];
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
*cnt = 0;
rnh->rnh_walktree(rnh, count_table_entry, cnt);
return (0);
}
static int
dump_table_entry(struct radix_node *rn, void *arg)
{
struct table_entry * const n = (struct table_entry *)rn;
ipfw_table * const tbl = arg;
ipfw_table_entry *ent;
if (tbl->cnt == tbl->size)
return (1);
ent = &tbl->ent[tbl->cnt];
ent->tbl = tbl->tbl;
if (in_nullhost(n->mask.sin_addr))
ent->masklen = 0;
else
ent->masklen = 33 - ffs(ntohl(n->mask.sin_addr.s_addr));
ent->addr = n->addr.sin_addr.s_addr;
ent->value = n->value;
tbl->cnt++;
return (0);
}
static int
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
dump_table(struct ip_fw_chain *ch, ipfw_table *tbl)
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
{
struct radix_node_head *rnh;
if (tbl->tbl >= IPFW_TABLES_MAX)
return (EINVAL);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
rnh = ch->tables[tbl->tbl];
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
tbl->cnt = 0;
rnh->rnh_walktree(rnh, dump_table_entry, tbl);
return (0);
}
Add an additional struct inpcb * argument to pfil(9) in order to enable passing along socket information. This is required to work around a LOR with the socket code which results in an easy reproducible hard lockup with debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do so later. The missing piece is to turn the filter locking into a leaf lock and will follow in a seperate (later) commit. This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in forseeable future. Suggested by: rwatson A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;) Reviewed by: rwatson, csjp Tested by: -pf, -ipfw, LINT, csjp and myself MFC after: 3 days LOR IDs: 14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
static void
fill_ugid_cache(struct inpcb *inp, struct ip_fw_ugid *ugp)
{
struct ucred *cr;
if (inp->inp_socket != NULL) {
cr = inp->inp_socket->so_cred;
ugp->fw_prid = jailed(cr) ?
cr->cr_prison->pr_id : -1;
ugp->fw_uid = cr->cr_uid;
ugp->fw_ngroups = cr->cr_ngroups;
bcopy(cr->cr_groups, ugp->fw_groups,
sizeof(ugp->fw_groups));
}
}
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
static int
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
check_uidgid(ipfw_insn_u32 *insn, int proto, struct ifnet *oif,
struct in_addr dst_ip, u_int16_t dst_port, struct in_addr src_ip,
u_int16_t src_port, struct ip_fw_ugid *ugp, int *lookup,
struct inpcb *inp)
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
{
struct inpcbinfo *pi;
int wildcard;
struct inpcb *pcb;
int match;
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
gid_t *gp;
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
Add an additional struct inpcb * argument to pfil(9) in order to enable passing along socket information. This is required to work around a LOR with the socket code which results in an easy reproducible hard lockup with debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do so later. The missing piece is to turn the filter locking into a leaf lock and will follow in a seperate (later) commit. This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in forseeable future. Suggested by: rwatson A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;) Reviewed by: rwatson, csjp Tested by: -pf, -ipfw, LINT, csjp and myself MFC after: 3 days LOR IDs: 14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
/*
* Check to see if the UDP or TCP stack supplied us with
* the PCB. If so, rather then holding a lock and looking
* up the PCB, we can use the one that was supplied.
*/
if (inp && *lookup == 0) {
INP_LOCK_ASSERT(inp);
if (inp->inp_socket != NULL) {
fill_ugid_cache(inp, ugp);
*lookup = 1;
}
}
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
/*
* If we have already been here and the packet has no
* PCB entry associated with it, then we can safely
* assume that this is a no match.
*/
if (*lookup == -1)
return (0);
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
if (proto == IPPROTO_TCP) {
wildcard = 0;
pi = &tcbinfo;
} else if (proto == IPPROTO_UDP) {
Use INPLOOKUP_WILDCARD instead of just 1 more consistently. OKed by: rwatson (some weeks ago)
2006-06-29 10:49:49 +00:00
wildcard = INPLOOKUP_WILDCARD;
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
pi = &udbinfo;
} else
return 0;
match = 0;
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
if (*lookup == 0) {
Add an additional struct inpcb * argument to pfil(9) in order to enable passing along socket information. This is required to work around a LOR with the socket code which results in an easy reproducible hard lockup with debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do so later. The missing piece is to turn the filter locking into a leaf lock and will follow in a seperate (later) commit. This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in forseeable future. Suggested by: rwatson A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;) Reviewed by: rwatson, csjp Tested by: -pf, -ipfw, LINT, csjp and myself MFC after: 3 days LOR IDs: 14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
INP_INFO_RLOCK(pi);
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
pcb = (oif) ?
in_pcblookup_hash(pi,
dst_ip, htons(dst_port),
src_ip, htons(src_port),
wildcard, oif) :
in_pcblookup_hash(pi,
src_ip, htons(src_port),
dst_ip, htons(dst_port),
wildcard, NULL);
if (pcb != NULL) {
INP_LOCK(pcb);
if (pcb->inp_socket != NULL) {
Add an additional struct inpcb * argument to pfil(9) in order to enable passing along socket information. This is required to work around a LOR with the socket code which results in an easy reproducible hard lockup with debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do so later. The missing piece is to turn the filter locking into a leaf lock and will follow in a seperate (later) commit. This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in forseeable future. Suggested by: rwatson A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;) Reviewed by: rwatson, csjp Tested by: -pf, -ipfw, LINT, csjp and myself MFC after: 3 days LOR IDs: 14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
fill_ugid_cache(pcb, ugp);
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
*lookup = 1;
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
}
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
INP_UNLOCK(pcb);
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
}
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
INP_INFO_RUNLOCK(pi);
if (*lookup == 0) {
/*
* If the lookup did not yield any results, there
* is no sense in coming back and trying again. So
* we can set lookup to -1 and ensure that we wont
* bother the pcb system again.
*/
*lookup = -1;
return (0);
}
}
if (insn->o.opcode == O_UID)
match = (ugp->fw_uid == (uid_t)insn->d[0]);
Add the ability to associate ipfw rules with a specific prison ID. Since the only thing truly unique about a prison is it's ID, I figured this would be the most granular way of handling this. This commit makes the following changes: - Adds tokenizing and parsing for the ``jail'' command line option to the ipfw(8) userspace utility. - Append the ipfw opcode list with O_JAIL. - While Iam here, add a comment informing others that if they want to add additional opcodes, they should append them to the end of the list to avoid ABI breakage. - Add ``fw_prid'' to the ipfw ucred cache structure. - When initializing ucred cache, if the process is jailed, set fw_prid to the prison ID, otherwise set it to -1. - Update man page to reflect these changes. This change was a strong motivator behind the ucred caching mechanism in ipfw. A sample usage of this new functionality could be: ipfw add count ip from any to any jail 2 It should be noted that because ucred based constraints are only implemented for TCP and UDP packets, the same applies for jail associations. Conceptual head nod by: pjd Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-12 22:06:55 +00:00
else if (insn->o.opcode == O_GID) {
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
for (gp = ugp->fw_groups;
gp < &ugp->fw_groups[ugp->fw_ngroups]; gp++)
if (*gp == (gid_t)insn->d[0]) {
match = 1;
break;
}
Add the ability to associate ipfw rules with a specific prison ID. Since the only thing truly unique about a prison is it's ID, I figured this would be the most granular way of handling this. This commit makes the following changes: - Adds tokenizing and parsing for the ``jail'' command line option to the ipfw(8) userspace utility. - Append the ipfw opcode list with O_JAIL. - While Iam here, add a comment informing others that if they want to add additional opcodes, they should append them to the end of the list to avoid ABI breakage. - Add ``fw_prid'' to the ipfw ucred cache structure. - When initializing ucred cache, if the process is jailed, set fw_prid to the prison ID, otherwise set it to -1. - Update man page to reflect these changes. This change was a strong motivator behind the ucred caching mechanism in ipfw. A sample usage of this new functionality could be: ipfw add count ip from any to any jail 2 It should be noted that because ucred based constraints are only implemented for TCP and UDP packets, the same applies for jail associations. Conceptual head nod by: pjd Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-12 22:06:55 +00:00
} else if (insn->o.opcode == O_JAIL)
match = (ugp->fw_prid == (int)insn->d[0]);
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
return match;
}
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
static eventhandler_tag ifaddr_event_tag;
static void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
ifaddr_change(void *arg __unused, struct ifnet *ifp)
{
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
struct cfg_nat *ptr;
struct ifaddr *ifa;
IPFW_WLOCK(&layer3_chain);
/* Check every nat entry... */
LIST_FOREACH(ptr, &layer3_chain.nat, _next) {
/* ...using nic 'ifp->if_xname' as dynamic alias address. */
if (strncmp(ptr->if_name, ifp->if_xname, IF_NAMESIZE) == 0) {
mtx_lock(&ifp->if_addr_mtx);
TAILQ_FOREACH(ifa, &ifp->if_addrlist, ifa_list) {
if (ifa->ifa_addr == NULL)
continue;
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
ptr->ip = ((struct sockaddr_in *)
(ifa->ifa_addr))->sin_addr;
LibAliasSetAddress(ptr->lib, ptr->ip);
}
mtx_unlock(&ifp->if_addr_mtx);
}
}
IPFW_WUNLOCK(&layer3_chain);
}
static void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
flush_nat_ptrs(const int i)
{
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
struct ip_fw *rule;
IPFW_WLOCK_ASSERT(&layer3_chain);
for (rule = layer3_chain.rules; rule; rule = rule->next) {
ipfw_insn_nat *cmd = (ipfw_insn_nat *)ACTION_PTR(rule);
if (cmd->o.opcode != O_NAT)
continue;
if (cmd->nat != NULL && cmd->nat->id == i)
cmd->nat = NULL;
}
}
static struct cfg_nat *
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
lookup_nat(const int i)
{
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
struct cfg_nat *ptr;
LIST_FOREACH(ptr, &layer3_chain.nat, _next)
if (ptr->id == i)
return(ptr);
return (NULL);
}
#define HOOK_NAT(b, p) do { \
IPFW_WLOCK_ASSERT(&layer3_chain); \
LIST_INSERT_HEAD(b, p, _next); \
} while (0)
#define UNHOOK_NAT(p) do { \
IPFW_WLOCK_ASSERT(&layer3_chain); \
LIST_REMOVE(p, _next); \
} while (0)
#define HOOK_REDIR(b, p) do { \
LIST_INSERT_HEAD(b, p, _next); \
} while (0)
#define HOOK_SPOOL(b, p) do { \
LIST_INSERT_HEAD(b, p, _next); \
} while (0)
static void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
del_redir_spool_cfg(struct cfg_nat *n, struct redir_chain *head)
{
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
struct cfg_redir *r, *tmp_r;
struct cfg_spool *s, *tmp_s;
int i, num;
LIST_FOREACH_SAFE(r, head, _next, tmp_r) {
num = 1; /* Number of alias_link to delete. */
switch (r->mode) {
case REDIR_PORT:
num = r->pport_cnt;
/* FALLTHROUGH */
case REDIR_ADDR:
case REDIR_PROTO:
/* Delete all libalias redirect entry. */
for (i = 0; i < num; i++)
LibAliasRedirectDelete(n->lib, r->alink[i]);
/* Del spool cfg if any. */
LIST_FOREACH_SAFE(s, &r->spool_chain, _next, tmp_s) {
LIST_REMOVE(s, _next);
free(s, M_IPFW);
}
free(r->alink, M_IPFW);
LIST_REMOVE(r, _next);
free(r, M_IPFW);
break;
default:
printf("unknown redirect mode: %u\n", r->mode);
/* XXX - panic?!?!? */
break;
}
}
}
static int
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
add_redir_spool_cfg(char *buf, struct cfg_nat *ptr)
{
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
struct cfg_redir *r, *ser_r;
struct cfg_spool *s, *ser_s;
int cnt, off, i;
char *panic_err;
for (cnt = 0, off = 0; cnt < ptr->redir_cnt; cnt++) {
ser_r = (struct cfg_redir *)&buf[off];
r = malloc(SOF_REDIR, M_IPFW, M_WAITOK | M_ZERO);
memcpy(r, ser_r, SOF_REDIR);
LIST_INIT(&r->spool_chain);
off += SOF_REDIR;
r->alink = malloc(sizeof(struct alias_link *) * r->pport_cnt,
M_IPFW, M_WAITOK | M_ZERO);
switch (r->mode) {
case REDIR_ADDR:
r->alink[0] = LibAliasRedirectAddr(ptr->lib, r->laddr,
r->paddr);
break;
case REDIR_PORT:
for (i = 0 ; i < r->pport_cnt; i++) {
/* If remotePort is all ports, set it to 0. */
u_short remotePortCopy = r->rport + i;
if (r->rport_cnt == 1 && r->rport == 0)
remotePortCopy = 0;
r->alink[i] = LibAliasRedirectPort(ptr->lib,
r->laddr, htons(r->lport + i), r->raddr,
htons(remotePortCopy), r->paddr,
htons(r->pport + i), r->proto);
if (r->alink[i] == NULL) {
r->alink[0] = NULL;
break;
}
}
break;
case REDIR_PROTO:
r->alink[0] = LibAliasRedirectProto(ptr->lib ,r->laddr,
r->raddr, r->paddr, r->proto);
break;
default:
printf("unknown redirect mode: %u\n", r->mode);
break;
}
if (r->alink[0] == NULL) {
panic_err = "LibAliasRedirect* returned NULL";
goto bad;
} else /* LSNAT handling. */
for (i = 0; i < r->spool_cnt; i++) {
ser_s = (struct cfg_spool *)&buf[off];
s = malloc(SOF_REDIR, M_IPFW,
M_WAITOK | M_ZERO);
memcpy(s, ser_s, SOF_SPOOL);
LibAliasAddServer(ptr->lib, r->alink[0],
s->addr, htons(s->port));
off += SOF_SPOOL;
/* Hook spool entry. */
HOOK_SPOOL(&r->spool_chain, s);
}
/* And finally hook this redir entry. */
HOOK_REDIR(&ptr->redir_chain, r);
}
return (1);
bad:
/* something really bad happened: panic! */
panic("%s\n", panic_err);
}
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* The main check routine for the firewall.
*
* All arguments are in args so we can modify them and return them
* back to the caller.
*
* Parameters:
*
* args->m (in/out) The packet; we set to NULL when/if we nuke it.
* Starts with the IP header.
* args->eh (in) Mac header if present, or NULL for layer3 packet.
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
* args->L3offset Number of bytes bypassed if we came from L2.
* e.g. often sizeof(eh) ** NOTYET **
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* args->oif Outgoing interface, or NULL if packet is incoming.
* The incoming interface is in the mbuf. (in)
* args->divert_rule (in/out)
* Skip up to the first rule past this rule number;
* upon return, non-zero port number for divert or tee.
*
* args->rule Pointer to the last matching rule (in/out)
* args->next_hop Socket we are forwarding to (out).
* args->f_id Addresses grabbed from the packet (out)
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
* args->cookie a cookie depending on rule action
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*
* Return value:
*
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
* IP_FW_PASS the packet must be accepted
* IP_FW_DENY the packet must be dropped
* IP_FW_DIVERT divert packet, port in m_tag
* IP_FW_TEE tee packet, port in m_tag
* IP_FW_DUMMYNET to dummynet, pipe in args->cookie
* IP_FW_NETGRAPH into netgraph, cookie args->cookie
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*
*/
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
int
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
ipfw_chk(struct ip_fw_args *args)
{
/*
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
* Local variables holding state during the processing of a packet:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*
* IMPORTANT NOTE: to speed up the processing of rules, there
* are some assumption on the values of the variables, which
* are documented here. Should you change them, please check
* the implementation of the various instructions to make sure
* that they still work.
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
*
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* args->eh The MAC header. It is non-null for a layer2
* packet, it is NULL for a layer-3 packet.
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
* **notyet**
* args->L3offset Offset in the packet to the L3 (IP or equiv.) header.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*
* m | args->m Pointer to the mbuf, as received from the caller.
* It may change if ipfw_chk() does an m_pullup, or if it
* consumes the packet because it calls send_reject().
* XXX This has to change, so that ipfw_chk() never modifies
* or consumes the buffer.
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
* ip is the beginning of the ip(4 or 6) header.
* Calculated by adding the L3offset to the start of data.
* (Until we start using L3offset, the packet is
* supposed to start with the ip header).
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
struct mbuf *m = args->m;
struct ip *ip = mtod(m, struct ip *);
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
/*
* For rules which contain uid/gid or jail constraints, cache
* a copy of the users credentials after the pcb lookup has been
* executed. This will speed up the processing of rules with
* these types of constraints, as well as decrease contention
* on pcb related locks.
*/
struct ip_fw_ugid fw_ugid_cache;
int ugid_lookup = 0;
Add support to IPFW for classification based on "diverted" status (that is, input via a divert socket).
2004-10-03 00:26:35 +00:00
/*
* divinput_flags If non-zero, set to the IP_FW_DIVERT_*_FLAG
* associated with a packet input on a divert socket. This
* will allow to distinguish traffic and its direction when
* it originates from a divert socket.
*/
u_int divinput_flags = 0;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* oif | args->oif If NULL, ipfw_chk has been called on the
Remove bridge(4) from the tree. if_bridge(4) is a full functional replacement and has additional features which make it superior. Discussed on: -arch Reviewed by: thompsa X-MFC-after: never (RELENG_6 as transition period)
2005-09-27 18:10:43 +00:00
* inbound path (ether_input, ip_input).
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* If non-NULL, ipfw_chk has been called on the outbound path
* (ether_output, ip_output).
*/
struct ifnet *oif = args->oif;
struct ip_fw *f = NULL; /* matching rule */
int retval = 0;
/*
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
* hlen The length of the IP header.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
u_int hlen = 0; /* hlen >0 means we have an IP pkt */
/*
* offset The offset of a fragment. offset != 0 means that
* we have a fragment at this offset of an IPv4 packet.
* offset == 0 means that (if this is an IPv4 packet)
* this is the first or only fragment.
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
* For IPv6 offset == 0 means there is no Fragment Header.
* If offset != 0 for IPv6 always use correct mask to
* get the correct offset because we add IP6F_MORE_FRAG
* to be able to dectect the first fragment which would
* otherwise have offset = 0.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
u_short offset = 0;
/*
* Local copies of addresses. They are only valid if we have
* an IP packet.
*
* proto The protocol. Set to 0 for non-ip packets,
* or to the protocol read from the packet otherwise.
* proto != 0 means that we have an IPv4 packet.
*
* src_port, dst_port port numbers, in HOST format. Only
* valid for TCP and UDP packets.
*
* src_ip, dst_ip ip addresses, in NETWORK format.
* Only valid for IPv4 packets.
*/
u_int8_t proto;
u_int16_t src_port = 0, dst_port = 0; /* NOTE: host format */
struct in_addr src_ip, dst_ip; /* NOTE: network format */
u_int16_t ip_len=0;
Account for packets processed at layer-2 (i.e. net.link.ether.ipfw=1). MFC after: 2 weeks
2003-06-02 23:54:09 +00:00
int pktlen;
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
u_int16_t etype = 0; /* Host order stored ether type */
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
/*
* dyn_dir = MATCH_UNKNOWN when rules unchecked,
* MATCH_NONE when checked and not matched (q = NULL),
* MATCH_FORWARD or MATCH_REVERSE otherwise (q != NULL)
*/
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
int dyn_dir = MATCH_UNKNOWN;
ipfw_dyn_rule *q = NULL;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
struct ip_fw_chain *chain = &layer3_chain;
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
struct m_tag *mtag;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
* We store in ulp a pointer to the upper layer protocol header.
* In the ipv4 case this is easy to determine from the header,
* but for ipv6 we might have some additional headers in the middle.
* ulp is NULL if not found.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
void *ulp = NULL; /* upper layer protocol pointer. */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
/* XXX ipv6 variables */
int is_ipv6 = 0;
u_int16_t ext_hd = 0; /* bits vector for extension header filtering */
/* end of ipv6 variables */
Add support for IPv4 only rules to IPFW2 now that it supports IPv6 as well. This is the last requirement before we can retire ip6fw. Reviewed by: dwhite, brooks(earlier version) Submitted by: dwhite (manpage) Silence from: -ipfw
2005-06-03 01:10:28 +00:00
int is_ipv4 = 0;
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
if (m->m_flags & M_SKIP_FIREWALL)
return (IP_FW_PASS); /* accept */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Account for packets processed at layer-2 (i.e. net.link.ether.ipfw=1). MFC after: 2 weeks
2003-06-02 23:54:09 +00:00
pktlen = m->m_pkthdr.len;
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
proto = args->f_id.proto = 0; /* mark f_id invalid */
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
/* XXX 0 is a valid proto: IP/IPv6 Hop-by-Hop Option */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
/*
* PULLUP_TO(len, p, T) makes sure that len + sizeof(T) is contiguous,
* then it sets p to point at the offset "len" in the mbuf. WARNING: the
* pointer might become stale after other pullups (but we never use it
* this way).
*/
#define PULLUP_TO(len, p, T) \
do { \
int x = (len) + sizeof(T); \
if ((m)->m_len < x) { \
args->m = m = m_pullup(m, x); \
if (m == NULL) \
goto pullup_failed; \
} \
p = (mtod(m, char *) + (len)); \
} while (0)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
/*
* if we have an ether header,
*/
if (args->eh)
etype = ntohs(args->eh->ether_type);
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
/* Identify IP packets and fill up variables. */
if (pktlen >= sizeof(struct ip6_hdr) &&
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
(args->eh == NULL || etype == ETHERTYPE_IPV6) && ip->ip_v == 6) {
struct ip6_hdr *ip6 = (struct ip6_hdr *)ip;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
is_ipv6 = 1;
args->f_id.addr_type = 6;
hlen = sizeof(struct ip6_hdr);
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
proto = ip6->ip6_nxt;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
/* Search extension headers to find upper layer protocols */
while (ulp == NULL) {
switch (proto) {
case IPPROTO_ICMPV6:
PULLUP_TO(hlen, ulp, struct icmp6_hdr);
args->f_id.flags = ICMP6(ulp)->icmp6_type;
break;
case IPPROTO_TCP:
PULLUP_TO(hlen, ulp, struct tcphdr);
dst_port = TCP(ulp)->th_dport;
src_port = TCP(ulp)->th_sport;
args->f_id.flags = TCP(ulp)->th_flags;
break;
Add SCTP as a known upper layer protocol over v6. We are not yet aware of the protocol internals but this way SCTP traffic over v6 will not be discarded. Reported by: Peter Lei via rrs Tested by: Peter Lei <peterlei cisco.com>
2006-11-13 19:07:32 +00:00
case IPPROTO_SCTP:
PULLUP_TO(hlen, ulp, struct sctphdr);
src_port = SCTP(ulp)->src_port;
dst_port = SCTP(ulp)->dest_port;
break;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case IPPROTO_UDP:
PULLUP_TO(hlen, ulp, struct udphdr);
dst_port = UDP(ulp)->uh_dport;
src_port = UDP(ulp)->uh_sport;
break;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case IPPROTO_HOPOPTS: /* RFC 2460 */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
PULLUP_TO(hlen, ulp, struct ip6_hbh);
ext_hd |= EXT_HOPOPTS;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
hlen += (((struct ip6_hbh *)ulp)->ip6h_len + 1) << 3;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
proto = ((struct ip6_hbh *)ulp)->ip6h_nxt;
ulp = NULL;
break;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case IPPROTO_ROUTING: /* RFC 2460 */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
PULLUP_TO(hlen, ulp, struct ip6_rthdr);
- Pullup even when the extention header is unknown, to prevent infinite loop with net.inet6.ip6.fw.deny_unknown_exthdrs=0. - Teach ipv6 and ipencap as they appear in an IPv4/IPv6 over IPv6 tunnel. - Test the next extention header even when the routing header type is unknown with net.inet6.ip6.fw.deny_unknown_exthdrs=0. Found by: xcast-fan-club MFC after: 1 week
2006-06-22 13:22:54 +00:00
switch (((struct ip6_rthdr *)ulp)->ip6r_type) {
case 0:
Add support for filtering on Routing Header Type 0 and Mobile IPv6 Routing Header Type 2 in addition to filter on the non-differentiated presence of any Routing Header. MFC after: 3 weeks
2007-05-04 11:15:41 +00:00
ext_hd |= EXT_RTHDR0;
break;
case 2:
ext_hd |= EXT_RTHDR2;
- Pullup even when the extention header is unknown, to prevent infinite loop with net.inet6.ip6.fw.deny_unknown_exthdrs=0. - Teach ipv6 and ipencap as they appear in an IPv4/IPv6 over IPv6 tunnel. - Test the next extention header even when the routing header type is unknown with net.inet6.ip6.fw.deny_unknown_exthdrs=0. Found by: xcast-fan-club MFC after: 1 week
2006-06-22 13:22:54 +00:00
break;
default:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
printf("IPFW2: IPV6 - Unknown Routing "
"Header type(%d)\n",
((struct ip6_rthdr *)ulp)->ip6r_type);
if (fw_deny_unknown_exthdrs)
return (IP_FW_DENY);
break;
}
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
ext_hd |= EXT_ROUTING;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
hlen += (((struct ip6_rthdr *)ulp)->ip6r_len + 1) << 3;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
proto = ((struct ip6_rthdr *)ulp)->ip6r_nxt;
ulp = NULL;
break;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case IPPROTO_FRAGMENT: /* RFC 2460 */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
PULLUP_TO(hlen, ulp, struct ip6_frag);
ext_hd |= EXT_FRAGMENT;
hlen += sizeof (struct ip6_frag);
proto = ((struct ip6_frag *)ulp)->ip6f_nxt;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
offset = ((struct ip6_frag *)ulp)->ip6f_offlg &
IP6F_OFF_MASK;
/* Add IP6F_MORE_FRAG for offset of first
* fragment to be != 0. */
offset |= ((struct ip6_frag *)ulp)->ip6f_offlg &
IP6F_MORE_FRAG;
if (offset == 0) {
printf("IPFW2: IPV6 - Invalid Fragment "
"Header\n");
if (fw_deny_unknown_exthdrs)
return (IP_FW_DENY);
break;
}
args->f_id.frag_id6 =
ntohl(((struct ip6_frag *)ulp)->ip6f_ident);
ulp = NULL;
break;
case IPPROTO_DSTOPTS: /* RFC 2460 */
PULLUP_TO(hlen, ulp, struct ip6_hbh);
ext_hd |= EXT_DSTOPTS;
hlen += (((struct ip6_hbh *)ulp)->ip6h_len + 1) << 3;
proto = ((struct ip6_hbh *)ulp)->ip6h_nxt;
ulp = NULL;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
break;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case IPPROTO_AH: /* RFC 2402 */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
PULLUP_TO(hlen, ulp, struct ip6_ext);
ext_hd |= EXT_AH;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
hlen += (((struct ip6_ext *)ulp)->ip6e_len + 2) << 2;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
proto = ((struct ip6_ext *)ulp)->ip6e_nxt;
ulp = NULL;
break;
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case IPPROTO_ESP: /* RFC 2406 */
PULLUP_TO(hlen, ulp, uint32_t); /* SPI, Seq# */
/* Anything past Seq# is variable length and
* data past this ext. header is encrypted. */
ext_hd |= EXT_ESP;
break;
case IPPROTO_NONE: /* RFC 2460 */
If we are walking the IPv6 header chain and we hit an IPPROTO_NONE header, then don't try to pullup anything, because there is no next header if we hit IPPROTO_NONE. Set ulp to a non-NULL value so the search for an upper layer header terinates. This is based on Pekka's diagnosis, but I chose a simpler fix. PR: 115261 Submitted by: Pekka Savola <pekkas@netcore.fi> Reviewed by: mlaier MFC after: 2 weeks
2007-12-09 15:35:09 +00:00
/*
* Packet ends here, and IPv6 header has
* already been pulled up. If ip6e_len!=0
* then octets must be ignored.
*/
ulp = ip; /* non-NULL to get out of loop. */
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
break;
Let OSPFv3 go through ipfw. Some more additional checks would be desirable, though.
2005-05-28 07:46:44 +00:00
case IPPROTO_OSPFIGP:
/* XXX OSPF header check? */
PULLUP_TO(hlen, ulp, struct ip6_ext);
break;
Recognise IPv6 PIM packets. MFC after: 1 week
2006-08-31 16:56:45 +00:00
case IPPROTO_PIM:
/* XXX PIM header check? */
PULLUP_TO(hlen, ulp, struct pim);
break;
Set scope on MC address so IPv6 carp advertisement will not get dropped in ip6_output. In case this fails handle the error directly and log it[1]. In addition permit CARP over v6 in ip_fw2. PR: kern/98622 Similar patch by: suz Discussed with: glebius [1] Tested by: Paul.Dekkers surfnet.nl, Philippe.Pegon crc.u-strasbg.fr MFC after: 3 days
2006-10-07 10:19:58 +00:00
case IPPROTO_CARP:
PULLUP_TO(hlen, ulp, struct carp_header);
if (((struct carp_header *)ulp)->carp_version !=
CARP_VERSION)
return (IP_FW_DENY);
if (((struct carp_header *)ulp)->carp_type !=
CARP_ADVERTISEMENT)
return (IP_FW_DENY);
break;
- Pullup even when the extention header is unknown, to prevent infinite loop with net.inet6.ip6.fw.deny_unknown_exthdrs=0. - Teach ipv6 and ipencap as they appear in an IPv4/IPv6 over IPv6 tunnel. - Test the next extention header even when the routing header type is unknown with net.inet6.ip6.fw.deny_unknown_exthdrs=0. Found by: xcast-fan-club MFC after: 1 week
2006-06-22 13:22:54 +00:00
case IPPROTO_IPV6: /* RFC 2893 */
PULLUP_TO(hlen, ulp, struct ip6_hdr);
break;
case IPPROTO_IPV4: /* RFC 2893 */
PULLUP_TO(hlen, ulp, struct ip);
break;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
default:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
printf("IPFW2: IPV6 - Unknown Extension "
"Header(%d), ext_hd=%x\n", proto, ext_hd);
if (fw_deny_unknown_exthdrs)
return (IP_FW_DENY);
- Pullup even when the extention header is unknown, to prevent infinite loop with net.inet6.ip6.fw.deny_unknown_exthdrs=0. - Teach ipv6 and ipencap as they appear in an IPv4/IPv6 over IPv6 tunnel. - Test the next extention header even when the routing header type is unknown with net.inet6.ip6.fw.deny_unknown_exthdrs=0. Found by: xcast-fan-club MFC after: 1 week
2006-06-22 13:22:54 +00:00
PULLUP_TO(hlen, ulp, struct ip6_ext);
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
break;
} /*switch */
}
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
ip = mtod(m, struct ip *);
ip6 = (struct ip6_hdr *)ip;
args->f_id.src_ip6 = ip6->ip6_src;
args->f_id.dst_ip6 = ip6->ip6_dst;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
args->f_id.src_ip = 0;
args->f_id.dst_ip = 0;
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
args->f_id.flow_id6 = ntohl(ip6->ip6_flow);
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
} else if (pktlen >= sizeof(struct ip) &&
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
(args->eh == NULL || etype == ETHERTYPE_IP) && ip->ip_v == 4) {
Add support for IPv4 only rules to IPFW2 now that it supports IPv6 as well. This is the last requirement before we can retire ip6fw. Reviewed by: dwhite, brooks(earlier version) Submitted by: dwhite (manpage) Silence from: -ipfw
2005-06-03 01:10:28 +00:00
is_ipv4 = 1;
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
hlen = ip->ip_hl << 2;
args->f_id.addr_type = 4;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
/*
* Collect parameters into local variables for faster matching.
*/
proto = ip->ip_p;
src_ip = ip->ip_src;
dst_ip = ip->ip_dst;
if (args->eh != NULL) { /* layer 2 packets are as on the wire */
offset = ntohs(ip->ip_off) & IP_OFFMASK;
ip_len = ntohs(ip->ip_len);
} else {
offset = ip->ip_off & IP_OFFMASK;
ip_len = ip->ip_len;
}
pktlen = ip_len < pktlen ? ip_len : pktlen;
if (offset == 0) {
switch (proto) {
case IPPROTO_TCP:
PULLUP_TO(hlen, ulp, struct tcphdr);
dst_port = TCP(ulp)->th_dport;
src_port = TCP(ulp)->th_sport;
args->f_id.flags = TCP(ulp)->th_flags;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
case IPPROTO_UDP:
PULLUP_TO(hlen, ulp, struct udphdr);
dst_port = UDP(ulp)->uh_dport;
src_port = UDP(ulp)->uh_sport;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
case IPPROTO_ICMP:
Introduce a struct icmphdr which contains the type, code, and cksum fields of an ICMP packet. Use this to allow ipfw to pullup only these values since it does not use the rest of the packet and it was failed on ICMP packets because they were not long enough. struct icmp should probably be modified to use these at some point, but that will break a fair bit of code so it can wait for another day. On the off chance that adding this struct breaks something in ports, bump __FreeBSD_version. Reported by: Randy Bush <randy at psg dot com> Tested by: Randy Bush <randy at psg dot com>
2005-04-26 18:10:21 +00:00
PULLUP_TO(hlen, ulp, struct icmphdr);
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
args->f_id.flags = ICMP(ulp)->icmp_type;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
default:
break;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
ip = mtod(m, struct ip *);
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
args->f_id.src_ip = ntohl(src_ip.s_addr);
args->f_id.dst_ip = ntohl(dst_ip.s_addr);
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#undef PULLUP_TO
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
if (proto) { /* we may have port numbers, store them */
args->f_id.proto = proto;
args->f_id.src_port = src_port = ntohs(src_port);
args->f_id.dst_port = dst_port = ntohs(dst_port);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RLOCK(chain);
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
mtag = m_tag_find(m, PACKET_TAG_DIVERT, NULL);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (args->rule) {
/*
* Packet has already been tagged. Look for the next rule
* to restart processing.
*
* If fw_one_pass != 0 then just accept it.
* XXX should not happen here, but optimized out in
* the caller.
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (fw_one_pass) {
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (IP_FW_PASS);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
f = args->rule->next_rule;
if (f == NULL)
f = lookup_next_rule(args->rule);
} else {
/*
* Find the starting rule. It can be either the first
* one, or the one after divert_rule if asked so.
*/
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
int skipto = mtag ? divert_cookie(mtag) : 0;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
f = chain->rules;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (args->eh == NULL && skipto != 0) {
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (skipto >= IPFW_DEFAULT_RULE) {
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (IP_FW_DENY); /* invalid */
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
while (f && f->rulenum <= skipto)
f = f->next;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (f == NULL) { /* drop packet */
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (IP_FW_DENY);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
}
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
/* reset divert rule to avoid confusion later */
Add support to IPFW for classification based on "diverted" status (that is, input via a divert socket).
2004-10-03 00:26:35 +00:00
if (mtag) {
divinput_flags = divert_info(mtag) &
(IP_FW_DIVERT_OUTPUT_FLAG | IP_FW_DIVERT_LOOPBACK_FLAG);
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
m_tag_delete(m, mtag);
Add support to IPFW for classification based on "diverted" status (that is, input via a divert socket).
2004-10-03 00:26:35 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* Now scan the rules, and parse microinstructions for each rule.
*/
for (; f; f = f->next) {
ipfw_insn *cmd;
Add a new feature for optimizining ipfw rulesets - substitution of the action argument with the value obtained from table lookup. The feature is now applicable only to "pipe", "queue", "divert", "tee", "netgraph" and "ngtee" rules. An example usage: ipfw pipe 1000 config bw 1000Kbyte/s ipfw pipe 4000 config bw 4000Kbyte/s ipfw table 1 add x.x.x.x 1000 ipfw table 1 add x.x.x.y 4000 ipfw pipe tablearg ip from table(1) to any In the example above the rule will throw different packets to different pipes. TODO: - Support "skipto" action, but without searching all rules. - Improve parser, so that it warns about bad rules. These are: - "tablearg" argument to action, but no "table" in the rule. All traffic will be blocked. - "tablearg" argument to action, but "table" searches for entry with a specific value. All traffic will be blocked. - "tablearg" argument to action, and two "table" looks - for src and for dst. The last lookup will match.
2005-12-13 12:16:03 +00:00
uint32_t tablearg = 0;
int l, cmdlen, skip_or; /* skip rest of OR block */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
again:
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
if (set_disable & (1 << f->set) )
continue;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
skip_or = 0;
for (l = f->cmd_len, cmd = f->cmd ; l > 0 ;
l -= cmdlen, cmd += cmdlen) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
int match;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* check_body is a jump target used when we find a
* CHECK_STATE, and need to jump to the body of
* the target rule.
*/
check_body:
cmdlen = F_LEN(cmd);
/*
* An OR block (insn_1 || .. || insn_n) has the
* F_OR bit set in all but the last instruction.
* The first match will set "skip_or", and cause
* the following instructions to be skipped until
* past the one with the F_OR bit clear.
*/
if (skip_or) { /* skip this instruction */
if ((cmd->len & F_OR) == 0)
skip_or = 0; /* next one is good */
continue;
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = 0; /* set to 1 if we succeed */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
switch (cmd->opcode) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
/*
* The first set of opcodes compares the packet's
* fields with some pattern, setting 'match' if a
* match is found. At the end of the loop there is
* logic to deal with F_NOT and F_OR flags associated
* with the opcode.
*/
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_NOP:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = 1;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_FORWARD_MAC:
printf("ipfw: opcode %d unimplemented\n",
cmd->opcode);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_GID:
case O_UID:
Add the ability to associate ipfw rules with a specific prison ID. Since the only thing truly unique about a prison is it's ID, I figured this would be the most granular way of handling this. This commit makes the following changes: - Adds tokenizing and parsing for the ``jail'' command line option to the ipfw(8) userspace utility. - Append the ipfw opcode list with O_JAIL. - While Iam here, add a comment informing others that if they want to add additional opcodes, they should append them to the end of the list to avoid ABI breakage. - Add ``fw_prid'' to the ipfw ucred cache structure. - When initializing ucred cache, if the process is jailed, set fw_prid to the prison ID, otherwise set it to -1. - Update man page to reflect these changes. This change was a strong motivator behind the ucred caching mechanism in ipfw. A sample usage of this new functionality could be: ipfw add count ip from any to any jail 2 It should be noted that because ucred based constraints are only implemented for TCP and UDP packets, the same applies for jail associations. Conceptual head nod by: pjd Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-12 22:06:55 +00:00
case O_JAIL:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* We only check offset == 0 && proto != 0,
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
* as this ensures that we have a
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* packet with the ports info.
*/
if (offset!=0)
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
if (is_ipv6) /* XXX to be fixed later */
break;
Move uid/gid checking logic out of line and lock inpcb usage. This has a LOR between IPFW inpcb locks but I'm committing it now as the lesser of two evils (the other being unlocked use of in_pcblookup). Supported by: FreeBSD Foundation
2003-11-07 23:26:57 +00:00
if (proto == IPPROTO_TCP ||
proto == IPPROTO_UDP)
match = check_uidgid(
(ipfw_insn_u32 *)cmd,
proto, oif,
Fix an arguments order in check_uidgid() call. PR: kern/59314 Submitted by: Andrey V. Shytov Approved by: re (rwatson, jhb)
2003-11-20 10:28:33 +00:00
dst_ip, dst_port,
Modify ip fw so that whenever UID or GID constraints exist in a ruleset, the pcb is looked up once per ipfw_chk() activation. This is done by extracting the required information out of the PCB and caching it to the ipfw_chk() stack. This should greatly reduce PCB looking contention and speed up the processing of UID/GID based firewall rules (especially with large UID/GID rulesets). Some very basic benchmarks were taken which compares the number of in_pcblookup_hash(9) activations to the number of firewall rules containing UID/GID based contraints before and after this patch. The results can be viewed here: o http://people.freebsd.org/~csjp/ip_fw_pcb.png Reviewed by: andre, luigi, rwatson Approved by: bmilekic (mentor)
2004-06-11 22:17:14 +00:00
src_ip, src_port, &fw_ugid_cache,
Add an additional struct inpcb * argument to pfil(9) in order to enable passing along socket information. This is required to work around a LOR with the socket code which results in an easy reproducible hard lockup with debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do so later. The missing piece is to turn the filter locking into a leaf lock and will follow in a seperate (later) commit. This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in forseeable future. Suggested by: rwatson A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;) Reviewed by: rwatson, csjp Tested by: -pf, -ipfw, LINT, csjp and myself MFC after: 3 days LOR IDs: 14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
&ugid_lookup, args->inp);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_RECV:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = iface_match(m->m_pkthdr.rcvif,
(ipfw_insn_if *)cmd);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_XMIT:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = iface_match(oif, (ipfw_insn_if *)cmd);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_VIA:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = iface_match(oif ? oif :
m->m_pkthdr.rcvif, (ipfw_insn_if *)cmd);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_MACADDR2:
if (args->eh != NULL) { /* have MAC header */
u_int32_t *want = (u_int32_t *)
((ipfw_insn_mac *)cmd)->addr;
u_int32_t *mask = (u_int32_t *)
((ipfw_insn_mac *)cmd)->mask;
u_int32_t *hdr = (u_int32_t *)args->eh;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match =
( want[0] == (hdr[0] & mask[0]) &&
want[1] == (hdr[1] & mask[1]) &&
want[2] == (hdr[2] & mask[2]) );
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_MAC_TYPE:
if (args->eh != NULL) {
u_int16_t *p =
((ipfw_insn_u16 *)cmd)->ports;
int i;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
for (i = cmdlen - 1; !match && i>0;
i--, p += 2)
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
match = (etype >= p[0] &&
etype <= p[1]);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_FRAG:
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
match = (offset != 0);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IN: /* "out" is "not in" */
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (oif == NULL);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_LAYER2:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (args->eh != NULL);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add support to IPFW for classification based on "diverted" status (that is, input via a divert socket).
2004-10-03 00:26:35 +00:00
case O_DIVERTED:
match = (cmd->arg1 & 1 && divinput_flags &
IP_FW_DIVERT_LOOPBACK_FLAG) ||
(cmd->arg1 & 2 && divinput_flags &
IP_FW_DIVERT_OUTPUT_FLAG);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_PROTO:
/*
* We do not allow an arg of 0 so the
* check of "proto" only suffices.
*/
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (proto == cmd->arg1);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_SRC:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
match = is_ipv4 &&
(((ipfw_insn_ip *)cmd)->addr.s_addr ==
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
src_ip.s_addr);
break;
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
case O_IP_SRC_LOOKUP:
case O_IP_DST_LOOKUP:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4) {
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
uint32_t a =
(cmd->opcode == O_IP_DST_LOOKUP) ?
dst_ip.s_addr : src_ip.s_addr;
uint32_t v;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
match = lookup_table(chain, cmd->arg1, a,
&v);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
if (!match)
break;
if (cmdlen == F_INSN_SIZE(ipfw_insn_u32))
match =
((ipfw_insn_u32 *)cmd)->d[0] == v;
Add a new feature for optimizining ipfw rulesets - substitution of the action argument with the value obtained from table lookup. The feature is now applicable only to "pipe", "queue", "divert", "tee", "netgraph" and "ngtee" rules. An example usage: ipfw pipe 1000 config bw 1000Kbyte/s ipfw pipe 4000 config bw 4000Kbyte/s ipfw table 1 add x.x.x.x 1000 ipfw table 1 add x.x.x.y 4000 ipfw pipe tablearg ip from table(1) to any In the example above the rule will throw different packets to different pipes. TODO: - Support "skipto" action, but without searching all rules. - Improve parser, so that it warns about bad rules. These are: - "tablearg" argument to action, but no "table" in the rule. All traffic will be blocked. - "tablearg" argument to action, but "table" searches for entry with a specific value. All traffic will be blocked. - "tablearg" argument to action, and two "table" looks - for src and for dst. The last lookup will match.
2005-12-13 12:16:03 +00:00
else
tablearg = v;
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
}
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_SRC_MASK:
Merge the handlers of O_IP_SRC_MASK and O_IP_DST_MASK opcodes, and support matching a list of addr/mask pairs so one can write more efficient rulesets which were not possible before e.g. add 100 skipto 1000 not src-ip 10.0.0.0/8,127.0.0.1/8,192.168.0.0/16 The change is fully backward compatible. ipfw2 and manpage commit to follow. MFC after: 3 days
2003-07-08 07:44:42 +00:00
case O_IP_DST_MASK:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4) {
Merge the handlers of O_IP_SRC_MASK and O_IP_DST_MASK opcodes, and support matching a list of addr/mask pairs so one can write more efficient rulesets which were not possible before e.g. add 100 skipto 1000 not src-ip 10.0.0.0/8,127.0.0.1/8,192.168.0.0/16 The change is fully backward compatible. ipfw2 and manpage commit to follow. MFC after: 3 days
2003-07-08 07:44:42 +00:00
uint32_t a =
(cmd->opcode == O_IP_DST_MASK) ?
dst_ip.s_addr : src_ip.s_addr;
uint32_t *p = ((ipfw_insn_u32 *)cmd)->d;
int i = cmdlen-1;
for (; !match && i>0; i-= 2, p+= 2)
match = (p[0] == (a & p[1]));
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_SRC_ME:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
struct ifnet *tif;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
INADDR_TO_IFP(src_ip, tif);
match = (tif != NULL);
}
break;
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_DST_SET:
case O_IP_SRC_SET:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
u_int32_t *d = (u_int32_t *)(cmd+1);
u_int32_t addr =
cmd->opcode == O_IP_DST_SET ?
src and dst address were erroneously swapped in SRC_SET and DST_SET commands. Use the correct one. Also affects ipfw2 in -stable.
2002-10-24 18:01:53 +00:00
args->f_id.dst_ip :
args->f_id.src_ip;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
if (addr < d[0])
break;
addr -= d[0]; /* subtract base */
match = (addr < cmd->arg1) &&
( d[ 1 + (addr>>5)] &
(1<<(addr & 0x1f)) );
}
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_DST:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
match = is_ipv4 &&
(((ipfw_insn_ip *)cmd)->addr.s_addr ==
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
dst_ip.s_addr);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_DST_ME:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
struct ifnet *tif;
INADDR_TO_IFP(dst_ip, tif);
match = (tif != NULL);
}
break;
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_SRCPORT:
case O_IP_DSTPORT:
/*
* offset == 0 && proto != 0 is enough
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
* to guarantee that we have a
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* packet with port info.
*/
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
if ((proto==IPPROTO_UDP || proto==IPPROTO_TCP)
&& offset == 0) {
u_int16_t x =
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
(cmd->opcode == O_IP_SRCPORT) ?
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
src_port : dst_port ;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
u_int16_t *p =
((ipfw_insn_u16 *)cmd)->ports;
int i;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
for (i = cmdlen - 1; !match && i>0;
i--, p += 2)
match = (x>=p[0] && x<=p[1]);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_ICMPTYPE:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (offset == 0 && proto==IPPROTO_ICMP &&
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
icmptype_match(ICMP(ulp), (ipfw_insn_u32 *)cmd) );
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#ifdef INET6
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case O_ICMP6TYPE:
match = is_ipv6 && offset == 0 &&
proto==IPPROTO_ICMPV6 &&
icmp6type_match(
ICMP6(ulp)->icmp6_type,
(ipfw_insn_u32 *)cmd);
break;
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#endif /* INET6 */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IPOPT:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
match = (is_ipv4 &&
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
ipopts_match(ip, cmd) );
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IPVER:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
match = (is_ipv4 &&
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
cmd->arg1 == ip->ip_v);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IPID:
case O_IPLEN:
Add support for multiple values and ranges for the "iplen", "ipttl", "ipid" options. This feature has been requested by several users. On passing, fix some minor bugs in the parser. This change is fully backward compatible so if you have an old /sbin/ipfw and a new kernel you are not in trouble (but you need to update /sbin/ipfw if you want to use the new features). Document the changes in the manpage. Now you can write things like ipfw add skipto 1000 iplen 0-500 which some people were asking to give preferential treatment to short packets. The 'MFC after' is just set as a reminder, because I still need to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately change the size of certain kernel structures; not that it matters a lot since ipfw2 is entirely optional and not the default...) PR: bin/48015 MFC after: 1 week
2003-06-22 17:33:19 +00:00
case O_IPTTL:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4) { /* only for IP packets */
Add support for multiple values and ranges for the "iplen", "ipttl", "ipid" options. This feature has been requested by several users. On passing, fix some minor bugs in the parser. This change is fully backward compatible so if you have an old /sbin/ipfw and a new kernel you are not in trouble (but you need to update /sbin/ipfw if you want to use the new features). Document the changes in the manpage. Now you can write things like ipfw add skipto 1000 iplen 0-500 which some people were asking to give preferential treatment to short packets. The 'MFC after' is just set as a reminder, because I still need to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately change the size of certain kernel structures; not that it matters a lot since ipfw2 is entirely optional and not the default...) PR: bin/48015 MFC after: 1 week
2003-06-22 17:33:19 +00:00
uint16_t x;
uint16_t *p;
int i;
if (cmd->opcode == O_IPLEN)
x = ip_len;
else if (cmd->opcode == O_IPTTL)
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
x = ip->ip_ttl;
Add support for multiple values and ranges for the "iplen", "ipttl", "ipid" options. This feature has been requested by several users. On passing, fix some minor bugs in the parser. This change is fully backward compatible so if you have an old /sbin/ipfw and a new kernel you are not in trouble (but you need to update /sbin/ipfw if you want to use the new features). Document the changes in the manpage. Now you can write things like ipfw add skipto 1000 iplen 0-500 which some people were asking to give preferential treatment to short packets. The 'MFC after' is just set as a reminder, because I still need to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately change the size of certain kernel structures; not that it matters a lot since ipfw2 is entirely optional and not the default...) PR: bin/48015 MFC after: 1 week
2003-06-22 17:33:19 +00:00
else /* must be IPID */
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
x = ntohs(ip->ip_id);
Add support for multiple values and ranges for the "iplen", "ipttl", "ipid" options. This feature has been requested by several users. On passing, fix some minor bugs in the parser. This change is fully backward compatible so if you have an old /sbin/ipfw and a new kernel you are not in trouble (but you need to update /sbin/ipfw if you want to use the new features). Document the changes in the manpage. Now you can write things like ipfw add skipto 1000 iplen 0-500 which some people were asking to give preferential treatment to short packets. The 'MFC after' is just set as a reminder, because I still need to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately change the size of certain kernel structures; not that it matters a lot since ipfw2 is entirely optional and not the default...) PR: bin/48015 MFC after: 1 week
2003-06-22 17:33:19 +00:00
if (cmdlen == 1) {
match = (cmd->arg1 == x);
break;
}
/* otherwise we have ranges */
p = ((ipfw_insn_u16 *)cmd)->ports;
i = cmdlen - 1;
for (; !match && i>0; i--, p += 2)
match = (x >= p[0] && x <= p[1]);
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
case O_IPPRECEDENCE:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
match = (is_ipv4 &&
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
(cmd->arg1 == (ip->ip_tos & 0xe0)) );
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IPTOS:
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
match = (is_ipv4 &&
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
flags_match(cmd, ip->ip_tos));
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add support to IPFW for matching by TCP data length.
2004-10-03 00:47:15 +00:00
case O_TCPDATALEN:
if (proto == IPPROTO_TCP && offset == 0) {
struct tcphdr *tcp;
uint16_t x;
uint16_t *p;
int i;
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
tcp = TCP(ulp);
Add support to IPFW for matching by TCP data length.
2004-10-03 00:47:15 +00:00
x = ip_len -
((ip->ip_hl + tcp->th_off) << 2);
if (cmdlen == 1) {
match = (cmd->arg1 == x);
break;
}
/* otherwise we have ranges */
p = ((ipfw_insn_u16 *)cmd)->ports;
i = cmdlen - 1;
for (; !match && i>0; i--, p += 2)
match = (x >= p[0] && x <= p[1]);
}
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_TCPFLAGS:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (proto == IPPROTO_TCP && offset == 0 &&
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
flags_match(cmd, TCP(ulp)->th_flags));
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_TCPOPTS:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (proto == IPPROTO_TCP && offset == 0 &&
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
tcpopts_match(TCP(ulp), cmd));
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_TCPSEQ:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (proto == IPPROTO_TCP && offset == 0 &&
((ipfw_insn_u32 *)cmd)->d[0] ==
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
TCP(ulp)->th_seq);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_TCPACK:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (proto == IPPROTO_TCP && offset == 0 &&
((ipfw_insn_u32 *)cmd)->d[0] ==
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
TCP(ulp)->th_ack);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_TCPWIN:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (proto == IPPROTO_TCP && offset == 0 &&
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
cmd->arg1 == TCP(ulp)->th_win);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_ESTAB:
/* reject packets which have SYN only */
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
/* XXX should i also check for TH_ACK ? */
match = (proto == IPPROTO_TCP && offset == 0 &&
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
(TCP(ulp)->th_flags &
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
(TH_RST | TH_ACK | TH_SYN)) != TH_SYN);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
case O_ALTQ: {
Link pf 4.1 to the build: - move ftp-proxy from libexec to usr.sbin - add tftp-proxy - new altq mtag link Approved by: re (kensmith)
2007-07-03 12:46:08 +00:00
struct pf_mtag *at;
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
ipfw_insn_altq *altq = (ipfw_insn_altq *)cmd;
match = 1;
Link pf 4.1 to the build: - move ftp-proxy from libexec to usr.sbin - add tftp-proxy - new altq mtag link Approved by: re (kensmith)
2007-07-03 12:46:08 +00:00
at = pf_find_mtag(m);
if (at != NULL && at->qid != 0)
Better explain, then actually implement the IPFW ALTQ-rule first-match policy. It may be used to provide more detailed classification of traffic without actually having to decide its fate at the time of classification. MFC after: 1 week
2005-06-04 19:04:31 +00:00
break;
Link pf 4.1 to the build: - move ftp-proxy from libexec to usr.sbin - add tftp-proxy - new altq mtag link Approved by: re (kensmith)
2007-07-03 12:46:08 +00:00
at = pf_get_mtag(m);
if (at == NULL) {
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
/*
* Let the packet fall back to the
* default ALTQ.
*/
break;
}
at->qid = altq->qid;
Remove ambiguity from hlen. IPv4 is now indicated by is_ipv4 and we need a proper hlen value for IPv6 to implement O_REJECT and O_LOG. Reviewed by: glebius, brooks, gnn Approved by: re (scottl)
2005-07-03 15:42:22 +00:00
if (is_ipv4)
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
at->af = AF_INET;
else
at->af = AF_LINK;
at->hdr = ip;
break;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_LOG:
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
if (fw_verbose)
comply with style police Submitted by: ru MFC after: 1 month
2006-08-18 22:36:05 +00:00
ipfw_log(f, hlen, args, m,
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
oif, offset, tablearg, ip);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = 1;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
case O_PROB:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = (random()<((ipfw_insn_u32 *)cmd)->d[0]);
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
case O_VERREVPATH:
/* Outgoing packets automatically pass/match */
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
match = ((oif != NULL) ||
Remove whitespace at end of line.
2003-06-23 21:18:56 +00:00
(m->m_pkthdr.rcvif == NULL) ||
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
(
#ifdef INET6
is_ipv6 ?
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
verify_path6(&(args->f_id.src_ip6),
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
m->m_pkthdr.rcvif) :
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#endif
Only invoke verify_path() for verrevpath and versrcreach when we have an IP packet.
2004-08-11 11:41:11 +00:00
verify_path(src_ip, m->m_pkthdr.rcvif)));
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
break;
case O_VERSRCREACH:
/* Outgoing packets automatically pass/match */
Only invoke verify_path() for verrevpath and versrcreach when we have an IP packet.
2004-08-11 11:41:11 +00:00
match = (hlen > 0 && ((oif != NULL) ||
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
#ifdef INET6
is_ipv6 ?
verify_path6(&(args->f_id.src_ip6),
NULL) :
#endif
verify_path(src_ip, NULL)));
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
break;
New ipfw option "antispoof": For incoming packets, the packet's source address is checked if it belongs to a directly connected network. If the network is directly connected, then the interface the packet came on in is compared to the interface the network is connected to. When incoming interface and directly connected interface are not the same, the packet does not match. Usage example: ipfw add deny ip from any to any not antispoof in Manpage education by: ru
2004-08-09 16:12:10 +00:00
case O_ANTISPOOF:
/* Outgoing packets automatically pass/match */
if (oif == NULL && hlen > 0 &&
In verify_rev_path6(): - do not use static memory as we are under a shared lock only - properly rtfree routes allocated with rtalloc - rename to verify_path6() - implement the full functionality of the IPv4 version Also make O_ANTISPOOF work with IPv6. Reviewed by: gnn Approved by: re (blanket)
2005-06-16 14:55:58 +00:00
( (is_ipv4 && in_localaddr(src_ip))
#ifdef INET6
|| (is_ipv6 &&
in6_localaddr(&(args->f_id.src_ip6)))
#endif
))
match =
#ifdef INET6
is_ipv6 ? verify_path6(
&(args->f_id.src_ip6),
m->m_pkthdr.rcvif) :
#endif
verify_path(src_ip,
m->m_pkthdr.rcvif);
New ipfw option "antispoof": For incoming packets, the packet's source address is checked if it belongs to a directly connected network. If the network is directly connected, then the interface the packet came on in is compared to the interface the network is connected to. When incoming interface and directly connected interface are not the same, the packet does not match. Usage example: ipfw add deny ip from any to any not antispoof in Manpage education by: ru
2004-08-09 16:12:10 +00:00
else
match = 1;
break;
Implement the 'ipsec' option to match packets coming out of an ipsec tunnel. Should work with both regular and fast ipsec (mutually exclusive). See manpage for more details. Submitted by: Ari Suutari (ari.suutari@syncrontech.com) Revised by: sam MFC after: 1 week
2003-07-04 21:42:32 +00:00
case O_IPSEC:
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#ifdef IPSEC
Implement the 'ipsec' option to match packets coming out of an ipsec tunnel. Should work with both regular and fast ipsec (mutually exclusive). See manpage for more details. Submitted by: Ari Suutari (ari.suutari@syncrontech.com) Revised by: sam MFC after: 1 week
2003-07-04 21:42:32 +00:00
match = (m_tag_find(m,
PACKET_TAG_IPSEC_IN_DONE, NULL) != NULL);
#endif
/* otherwise no match */
break;
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#ifdef INET6
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case O_IP6_SRC:
match = is_ipv6 &&
IN6_ARE_ADDR_EQUAL(&args->f_id.src_ip6,
&((ipfw_insn_ip6 *)cmd)->addr6);
break;
case O_IP6_DST:
match = is_ipv6 &&
IN6_ARE_ADDR_EQUAL(&args->f_id.dst_ip6,
&((ipfw_insn_ip6 *)cmd)->addr6);
break;
case O_IP6_SRC_MASK:
case O_IP6_DST_MASK:
if (is_ipv6) {
Handle a list of IPv6 src and dst addresses correctly, eg. ipfw add allow ip6 from any to 2000::/16,2002::/16 PR: 102422 (part 3) Submitted by: Andrey V. Elsukov <bu7cher at yandex dot ru> MFC after: 5 days
2006-09-16 10:27:05 +00:00
int i = cmdlen - 1;
struct in6_addr p;
struct in6_addr *d =
&((ipfw_insn_ip6 *)cmd)->addr6;
for (; !match && i > 0; d += 2,
i -= F_INSN_SIZE(struct in6_addr)
* 2) {
p = (cmd->opcode ==
O_IP6_SRC_MASK) ?
args->f_id.src_ip6:
args->f_id.dst_ip6;
APPLY_MASK(&p, &d[1]);
match =
IN6_ARE_ADDR_EQUAL(&d[0],
&p);
}
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
}
break;
case O_IP6_SRC_ME:
match= is_ipv6 && search_ip6_addr_net(&args->f_id.src_ip6);
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
break;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case O_IP6_DST_ME:
match= is_ipv6 && search_ip6_addr_net(&args->f_id.dst_ip6);
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
break;
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case O_FLOW6ID:
match = is_ipv6 &&
flow6id_match(args->f_id.flow_id6,
(ipfw_insn_u32 *) cmd);
break;
case O_EXT_HDR:
match = is_ipv6 &&
(ext_hd & ((ipfw_insn *) cmd)->arg1);
break;
case O_IP6:
match = is_ipv6;
break;
Make IPFIREWALL compile without INET6
2005-04-19 09:56:14 +00:00
#endif
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
Add support for IPv4 only rules to IPFW2 now that it supports IPv6 as well. This is the last requirement before we can retire ip6fw. Reviewed by: dwhite, brooks(earlier version) Submitted by: dwhite (manpage) Silence from: -ipfw
2005-06-03 01:10:28 +00:00
case O_IP4:
match = is_ipv4;
break;
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
case O_TAG: {
uint32_t tag = (cmd->arg1 == IP_FW_TABLEARG) ?
tablearg : cmd->arg1;
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
/* Packet is already tagged with this tag? */
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
mtag = m_tag_locate(m, MTAG_IPFW, tag, NULL);
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
/* We have `untag' action when F_NOT flag is
* present. And we must remove this mtag from
* mbuf and reset `match' to zero (`match' will
* be inversed later).
* Otherwise we should allocate new mtag and
* push it into mbuf.
*/
if (cmd->len & F_NOT) { /* `untag' action */
if (mtag != NULL)
m_tag_delete(m, mtag);
} else if (mtag == NULL) {
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
if ((mtag = m_tag_alloc(MTAG_IPFW,
tag, 0, M_NOWAIT)) != NULL)
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
m_tag_prepend(m, mtag);
}
match = (cmd->len & F_NOT) ? 0: 1;
break;
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
}
case O_TAGGED: {
uint32_t tag = (cmd->arg1 == IP_FW_TABLEARG) ?
tablearg : cmd->arg1;
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
if (cmdlen == 1) {
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
match = m_tag_locate(m, MTAG_IPFW,
tag, NULL) != NULL;
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
break;
}
/* we have ranges */
for (mtag = m_tag_first(m);
mtag != NULL && !match;
mtag = m_tag_next(m, mtag)) {
uint16_t *p;
int i;
if (mtag->m_tag_cookie != MTAG_IPFW)
continue;
p = ((ipfw_insn_u16 *)cmd)->ports;
i = cmdlen - 1;
for(; !match && i > 0; i--, p += 2)
match =
mtag->m_tag_id >= p[0] &&
mtag->m_tag_id <= p[1];
}
break;
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
}
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
/*
* The second set of opcodes represents 'actions',
* i.e. the terminal part of a rule once the packet
* matches all previous patterns.
* Typically there is only one action for each rule,
* and the opcode is stored at the end of the rule
* (but there are exceptions -- see below).
*
* In general, here we set retval and terminate the
* outer loop (would be a 'break 3' in some language,
* but we need to do a 'goto done').
*
* Exceptions:
* O_COUNT and O_SKIPTO actions:
* instead of terminating, we jump to the next rule
* ('goto next_rule', equivalent to a 'break 2'),
* or to the SKIPTO target ('goto again' after
* having set f, cmd and l), respectively.
*
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
* O_TAG, O_LOG and O_ALTQ action parameters:
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
* perform some action and set match = 1;
*
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
* O_LIMIT and O_KEEP_STATE: these opcodes are
* not real 'actions', and are stored right
* before the 'action' part of the rule.
* These opcodes try to install an entry in the
* state tables; if successful, we continue with
* the next opcode (match=1; break;), otherwise
* the packet * must be dropped
* ('goto done' after setting retval);
*
* O_PROBE_STATE and O_CHECK_STATE: these opcodes
* cause a lookup of the state table, and a jump
* to the 'action' part of the parent rule
* ('goto check_body') if an entry is found, or
* (CHECK_STATE only) a jump to the next rule if
* the entry is not found ('goto next_rule').
* The result of the lookup is cached to make
* further instances of these opcodes are
* effectively NOPs.
*/
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_LIMIT:
case O_KEEP_STATE:
if (install_state(f,
Add support of 'tablearg' feature for: - 'tag' & 'untag' action parameters. - 'tagged' & 'limit' rule options. Rule examples: pipe 1 tag tablearg ip from table(1) to any allow ip from any to table(2) tagged tablearg allow tcp from table(3) to any 25 setup limit src-addr tablearg sbin/ipfw/ipfw2.c: 1) new macros GET_UINT_ARG - support of 'tablearg' keyword, argument range checking. PRINT_UINT_ARG - support of 'tablearg' keyword. 2) strtoport(): do not silently truncate/accept invalid port list expressions like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup. Approved by: glebius (mentor) MFC after: 1 month
2006-06-15 09:39:22 +00:00
(ipfw_insn_limit *)cmd, args, tablearg)) {
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
retval = IP_FW_DENY;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
goto done; /* error/limit violation */
}
match = 1;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_PROBE_STATE:
case O_CHECK_STATE:
/*
* dynamic rules are checked at the first
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
* keep-state or check-state occurrence,
* with the result being stored in dyn_dir.
* The compiler introduces a PROBE_STATE
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* instruction for us when we have a
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
* KEEP_STATE (because PROBE_STATE needs
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* to be run first).
*/
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
if (dyn_dir == MATCH_UNKNOWN &&
(q = lookup_dyn_rule(&args->f_id,
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
&dyn_dir, proto == IPPROTO_TCP ?
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
TCP(ulp) : NULL))
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
!= NULL) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
/*
* Found dynamic entry, update stats
* and jump to the 'action' part of
* the parent rule.
*/
q->pcnt++;
Account for packets processed at layer-2 (i.e. net.link.ether.ipfw=1). MFC after: 2 weeks
2003-06-02 23:54:09 +00:00
q->bcnt += pktlen;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
f = q->rule;
cmd = ACTION_PTR(f);
l = f->cmd_len - f->act_ofs;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
goto check_body;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
/*
* Dynamic entry not found. If CHECK_STATE,
* skip to next rule, if PROBE_STATE just
* ignore and continue with next opcode.
*/
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (cmd->opcode == O_CHECK_STATE)
goto next_rule;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
match = 1;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_ACCEPT:
retval = 0; /* accept */
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
goto done;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_PIPE:
case O_QUEUE:
args->rule = f; /* report matching rule */
Add a new feature for optimizining ipfw rulesets - substitution of the action argument with the value obtained from table lookup. The feature is now applicable only to "pipe", "queue", "divert", "tee", "netgraph" and "ngtee" rules. An example usage: ipfw pipe 1000 config bw 1000Kbyte/s ipfw pipe 4000 config bw 4000Kbyte/s ipfw table 1 add x.x.x.x 1000 ipfw table 1 add x.x.x.y 4000 ipfw pipe tablearg ip from table(1) to any In the example above the rule will throw different packets to different pipes. TODO: - Support "skipto" action, but without searching all rules. - Improve parser, so that it warns about bad rules. These are: - "tablearg" argument to action, but no "table" in the rule. All traffic will be blocked. - "tablearg" argument to action, but "table" searches for entry with a specific value. All traffic will be blocked. - "tablearg" argument to action, and two "table" looks - for src and for dst. The last lookup will match.
2005-12-13 12:16:03 +00:00
if (cmd->arg1 == IP_FW_TABLEARG)
args->cookie = tablearg;
else
args->cookie = cmd->arg1;
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
retval = IP_FW_DUMMYNET;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
goto done;
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_DIVERT:
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
case O_TEE: {
struct divert_tag *dt;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (args->eh) /* not on layer 2 */
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
mtag = m_tag_get(PACKET_TAG_DIVERT,
sizeof(struct divert_tag),
M_NOWAIT);
if (mtag == NULL) {
/* XXX statistic */
/* drop packet */
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (IP_FW_DENY);
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
}
dt = (struct divert_tag *)(mtag+1);
dt->cookie = f->rulenum;
Add a new feature for optimizining ipfw rulesets - substitution of the action argument with the value obtained from table lookup. The feature is now applicable only to "pipe", "queue", "divert", "tee", "netgraph" and "ngtee" rules. An example usage: ipfw pipe 1000 config bw 1000Kbyte/s ipfw pipe 4000 config bw 4000Kbyte/s ipfw table 1 add x.x.x.x 1000 ipfw table 1 add x.x.x.y 4000 ipfw pipe tablearg ip from table(1) to any In the example above the rule will throw different packets to different pipes. TODO: - Support "skipto" action, but without searching all rules. - Improve parser, so that it warns about bad rules. These are: - "tablearg" argument to action, but no "table" in the rule. All traffic will be blocked. - "tablearg" argument to action, but "table" searches for entry with a specific value. All traffic will be blocked. - "tablearg" argument to action, and two "table" looks - for src and for dst. The last lookup will match.
2005-12-13 12:16:03 +00:00
if (cmd->arg1 == IP_FW_TABLEARG)
dt->info = tablearg;
else
dt->info = cmd->arg1;
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
m_tag_prepend(m, mtag);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
retval = (cmd->opcode == O_DIVERT) ?
IP_FW_DIVERT : IP_FW_TEE;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
goto done;
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_COUNT:
case O_SKIPTO:
f->pcnt++; /* update stats */
Account for packets processed at layer-2 (i.e. net.link.ether.ipfw=1). MFC after: 2 weeks
2003-06-02 23:54:09 +00:00
f->bcnt += pktlen;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
f->timestamp = time_uptime;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (cmd->opcode == O_COUNT)
goto next_rule;
/* handle skipto */
if (f->next_rule == NULL)
lookup_next_rule(f);
f = f->next_rule;
goto again;
case O_REJECT:
/*
* Drop the packet and send a reject notice
* if the packet is not ICMP (or is an ICMP
* query), and it is not multicast/broadcast.
*/
Correct insecure temporary file usage in texindex. [06:01] Correct insecure temporary file usage in ee. [06:02] Correct a race condition when setting file permissions, sanitize file names by default, and fix a buffer overflow when handling files larger than 4GB in cpio. [06:03] Fix an error in the handling of IP fragments in ipfw which can cause a kernel panic. [06:04] Security: FreeBSD-SA-06:01.texindex Security: FreeBSD-SA-06:02.ee Security: FreeBSD-SA-06:03.cpio Security: FreeBSD-SA-06:04.ipfw
2006-01-11 08:02:16 +00:00
if (hlen > 0 && is_ipv4 && offset == 0 &&
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
(proto != IPPROTO_ICMP ||
Centralized finding the protocol header in IP packets in preperation for IPv6 support. The header in IPv6 is more complex then in IPv4 so we want to handle skipping over it in one location. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-15 00:47:44 +00:00
is_icmp_query(ICMP(ulp))) &&
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
!(m->m_flags & (M_BCAST|M_MCAST)) &&
o IN_MULTICAST wants an address in host byte order. PR: kern/60304 Submitted by: demon MFC after: 1 week
2003-12-16 18:21:47 +00:00
!IN_MULTICAST(ntohl(dst_ip.s_addr))) {
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
send_reject(args, cmd->arg1, ip_len, ip);
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
m = args->m;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
/* FALLTHROUGH */
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
#ifdef INET6
case O_UNREACH6:
if (hlen > 0 && is_ipv6 &&
Eliminate the offset argument from send_reject. It's not been used since FreeBSD-SA-06:04.ipfw. Adopt send_reject6 to what had been done for legacy IP: no longer send or permit sending rejects for any but the first fragment. Discussed with: oleg, csjp (some weeks ago)
2006-06-29 11:17:16 +00:00
((offset & IP6F_OFF_MASK) == 0) &&
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
(proto != IPPROTO_ICMPV6 ||
(is_icmp6_query(args->f_id.flags) == 1)) &&
!(m->m_flags & (M_BCAST|M_MCAST)) &&
!IN6_IS_ADDR_MULTICAST(&args->f_id.dst_ip6)) {
Remove a bunch of dependencies in the IP header being the first thing in the mbuf. First moves toward being able to cope better with having layer 2 (or other encapsulation data) before the IP header in the packet being examined. More commits to come to round out this functionality. This commit should have no practical effect but clears the way for what is coming. Revirewed by: luigi, yar MFC After: 2 weeks
2007-01-02 19:57:31 +00:00
send_reject6(
args, cmd->arg1, hlen,
(struct ip6_hdr *)ip);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
m = args->m;
}
/* FALLTHROUGH */
#endif
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
case O_DENY:
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
retval = IP_FW_DENY;
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
goto done;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Allow ipfw to forward to a destination that is specified by a table. for example: fwd tablearg ip from any to table(1) where table 1 has entries of the form: 1.1.1.0/24 10.2.3.4 208.23.2.0/24 router2 This allows trivial implementation of a secondary routing table implemented in the firewall layer. I expect more work (under discussion with Glebius) to follow this to clean up some of the messy parts of ipfw related to tables. Reviewed by: Glebius MFC after: 1 month
2006-08-17 22:49:50 +00:00
case O_FORWARD_IP: {
struct sockaddr_in *sa;
sa = &(((ipfw_insn_sa *)cmd)->sa);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (args->eh) /* not valid on layer2 pkts */
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
break;
Allow ipfw to forward to a destination that is specified by a table. for example: fwd tablearg ip from any to table(1) where table 1 has entries of the form: 1.1.1.0/24 10.2.3.4 208.23.2.0/24 router2 This allows trivial implementation of a secondary routing table implemented in the firewall layer. I expect more work (under discussion with Glebius) to follow this to clean up some of the messy parts of ipfw related to tables. Reviewed by: Glebius MFC after: 1 month
2006-08-17 22:49:50 +00:00
if (!q || dyn_dir == MATCH_FORWARD) {
if (sa->sin_addr.s_addr == INADDR_ANY) {
bcopy(sa, &args->hopstore,
sizeof(*sa));
comply with style police Submitted by: ru MFC after: 1 month
2006-08-18 22:36:05 +00:00
args->hopstore.sin_addr.s_addr =
htonl(tablearg);
args->next_hop =
&args->hopstore;
Allow ipfw to forward to a destination that is specified by a table. for example: fwd tablearg ip from any to table(1) where table 1 has entries of the form: 1.1.1.0/24 10.2.3.4 208.23.2.0/24 router2 This allows trivial implementation of a secondary routing table implemented in the firewall layer. I expect more work (under discussion with Glebius) to follow this to clean up some of the messy parts of ipfw related to tables. Reviewed by: Glebius MFC after: 1 month
2006-08-17 22:49:50 +00:00
} else {
args->next_hop = sa;
}
}
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
retval = IP_FW_PASS;
comply with style police Submitted by: ru MFC after: 1 month
2006-08-18 22:36:05 +00:00
}
goto done;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add a ng_ipfw node, implementing a quick and simple interface between ipfw(4) and netgraph(4) facilities. Reviewed by: andre, brooks, julian
2005-02-05 12:06:33 +00:00
case O_NETGRAPH:
case O_NGTEE:
args->rule = f; /* report matching rule */
Add a new feature for optimizining ipfw rulesets - substitution of the action argument with the value obtained from table lookup. The feature is now applicable only to "pipe", "queue", "divert", "tee", "netgraph" and "ngtee" rules. An example usage: ipfw pipe 1000 config bw 1000Kbyte/s ipfw pipe 4000 config bw 4000Kbyte/s ipfw table 1 add x.x.x.x 1000 ipfw table 1 add x.x.x.y 4000 ipfw pipe tablearg ip from table(1) to any In the example above the rule will throw different packets to different pipes. TODO: - Support "skipto" action, but without searching all rules. - Improve parser, so that it warns about bad rules. These are: - "tablearg" argument to action, but no "table" in the rule. All traffic will be blocked. - "tablearg" argument to action, but "table" searches for entry with a specific value. All traffic will be blocked. - "tablearg" argument to action, and two "table" looks - for src and for dst. The last lookup will match.
2005-12-13 12:16:03 +00:00
if (cmd->arg1 == IP_FW_TABLEARG)
args->cookie = tablearg;
else
args->cookie = cmd->arg1;
Add a ng_ipfw node, implementing a quick and simple interface between ipfw(4) and netgraph(4) facilities. Reviewed by: andre, brooks, julian
2005-02-05 12:06:33 +00:00
retval = (cmd->opcode == O_NETGRAPH) ?
IP_FW_NETGRAPH : IP_FW_NGTEE;
goto done;
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
case O_NAT: {
struct cfg_nat *t;
struct mbuf *mcl;
/* XXX - libalias duct tape */
Add table/tablearg support to ipfw's nat. MFC After: 1 week
2008-02-24 15:37:45 +00:00
int ldt, nat_id;
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
char *c;
ldt = 0;
args->rule = f; /* Report matching rule. */
retval = 0;
t = ((ipfw_insn_nat *)cmd)->nat;
if (t == NULL) {
Add table/tablearg support to ipfw's nat. MFC After: 1 week
2008-02-24 15:37:45 +00:00
nat_id = (cmd->arg1 == IP_FW_TABLEARG) ?
tablearg : cmd->arg1;
t = lookup_nat(nat_id);
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
if (t == NULL) {
retval = IP_FW_DENY;
goto done;
} else
((ipfw_insn_nat *)cmd)->nat =
t;
}
if ((mcl = m_megapullup(m, m->m_pkthdr.len)) ==
NULL)
goto badnat;
ip = mtod(mcl, struct ip *);
if (args->eh == NULL) {
ip->ip_len = htons(ip->ip_len);
ip->ip_off = htons(ip->ip_off);
}
/*
* XXX - Libalias checksum offload 'duct tape':
*
* locally generated packets have only
* pseudo-header checksum calculated
* and libalias will screw it[1], so
* mark them for later fix. Moreover
* there are cases when libalias
* modify tcp packet data[2], mark it
* for later fix too.
*
* [1] libalias was never meant to run
* in kernel, so it doesn't have any
* knowledge about checksum
* offloading, and it expects a packet
* with a full internet
* checksum. Unfortunately, packets
* generated locally will have just the
* pseudo header calculated, and when
* libalias tries to adjust the
* checksum it will actually screw it.
*
* [2] when libalias modify tcp's data
* content, full TCP checksum has to
* be recomputed: the problem is that
* libalias doesn't have any idea
* about checksum offloading To
* workaround this, we do not do
* checksumming in LibAlias, but only
* mark the packets in th_x2 field. If
* we receive a marked packet, we
* calculate correct checksum for it
* aware of offloading. Why such a
* terrible hack instead of
* recalculating checksum for each
* packet? Because the previous
* checksum was not checked!
* Recalculating checksums for EVERY
* packet will hide ALL transmission
* errors. Yes, marked packets still
* suffer from this problem. But,
* sigh, natd(8) has this problem,
* too.
*
* TODO: -make libalias mbuf aware (so
* it can handle delayed checksum and tso)
*/
if (mcl->m_pkthdr.rcvif == NULL &&
mcl->m_pkthdr.csum_flags &
CSUM_DELAY_DATA)
ldt = 1;
c = mtod(mcl, char *);
if (oif == NULL)
retval = LibAliasIn(t->lib, c,
MCLBYTES);
else
retval = LibAliasOut(t->lib, c,
MCLBYTES);
if (retval != PKT_ALIAS_OK) {
/* XXX - should i add some logging? */
m_free(mcl);
badnat:
args->m = NULL;
retval = IP_FW_DENY;
goto done;
}
mcl->m_pkthdr.len = mcl->m_len =
ntohs(ip->ip_len);
/*
* XXX - libalias checksum offload
* 'duct tape' (see above)
*/
if ((ip->ip_off & htons(IP_OFFMASK)) == 0 &&
ip->ip_p == IPPROTO_TCP) {
struct tcphdr *th;
th = (struct tcphdr *)(ip + 1);
if (th->th_x2)
ldt = 1;
}
if (ldt) {
struct tcphdr *th;
struct udphdr *uh;
u_short cksum;
ip->ip_len = ntohs(ip->ip_len);
cksum = in_pseudo(
ip->ip_src.s_addr,
ip->ip_dst.s_addr,
htons(ip->ip_p + ip->ip_len -
(ip->ip_hl << 2))
);
switch (ip->ip_p) {
case IPPROTO_TCP:
th = (struct tcphdr *)(ip + 1);
/*
* Maybe it was set in
* libalias...
*/
th->th_x2 = 0;
th->th_sum = cksum;
mcl->m_pkthdr.csum_data =
offsetof(struct tcphdr,
th_sum);
break;
case IPPROTO_UDP:
uh = (struct udphdr *)(ip + 1);
uh->uh_sum = cksum;
mcl->m_pkthdr.csum_data =
offsetof(struct udphdr,
uh_sum);
break;
}
/*
* No hw checksum offloading: do it
* by ourself.
*/
if ((mcl->m_pkthdr.csum_flags &
CSUM_DELAY_DATA) == 0) {
in_delayed_cksum(mcl);
mcl->m_pkthdr.csum_flags &=
~CSUM_DELAY_DATA;
}
ip->ip_len = htons(ip->ip_len);
}
if (args->eh == NULL) {
ip->ip_len = ntohs(ip->ip_len);
ip->ip_off = ntohs(ip->ip_off);
}
args->m = mcl;
retval = IP_FW_NAT;
goto done;
}
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default:
panic("-- unknown opcode %d\n", cmd->opcode);
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
} /* end of switch() on opcodes */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
if (cmd->len & F_NOT)
match = !match;
if (match) {
if (cmd->len & F_OR)
skip_or = 1;
} else {
if (!(cmd->len & F_OR)) /* not an OR block, */
break; /* try next rule */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
} /* end of inner for, scan opcodes */
Fix warning. Reviewed by: luigi
2002-06-28 08:36:26 +00:00
next_rule:; /* try next rule */
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
} /* end of outer for, scan rules */
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
printf("ipfw: ouch!, skip past end of rules, denying packet\n");
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (IP_FW_DENY);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
done:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/* Update statistics */
f->pcnt++;
Account for packets processed at layer-2 (i.e. net.link.ether.ipfw=1). MFC after: 2 weeks
2003-06-02 23:54:09 +00:00
f->bcnt += pktlen;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
f->timestamp = time_uptime;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (retval);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
pullup_failed:
if (fw_verbose)
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
printf("ipfw: pullup failed\n");
o Clean up interface between ip_fw_chk() and its callers: - ip_fw_chk() returns action as function return value. Field retval is removed from args structure. Action is not flag any more. It is one of integer constants. - Any action-specific cookies are returned either in new "cookie" field in args structure (dummynet, future netgraph glue), or in mbuf tag attached to packet (divert, tee, some future action). o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}() to a switch structure, so that the functions are more readable, and a future actions can be added with less modifications. Approved by: andre MFC after: 2 months
2005-01-14 09:00:46 +00:00
return (IP_FW_DENY);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
/*
* When a rule is added/deleted, clear the next_rule pointers in all rules.
* These will be reconstructed on the fly as packets are matched.
*/
static void
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
flush_rule_ptrs(struct ip_fw_chain *chain)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
struct ip_fw *rule;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK_ASSERT(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
for (rule = chain->rules; rule; rule = rule->next)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
rule->next_rule = NULL;
}
/*
* Add a new rule to the list. Copy the rule into a malloc'ed area, then
* possibly create a rule number and add the rule to the list.
* Update the rule_number in the input struct so the caller knows it as well.
*/
static int
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
add_rule(struct ip_fw_chain *chain, struct ip_fw *input_rule)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
struct ip_fw *rule, *f, *prev;
int l = RULESIZE(input_rule);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (chain->rules == NULL && input_rule->rulenum != IPFW_DEFAULT_RULE)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return (EINVAL);
Several malloc() calls were passing the M_DONTWAIT flag which is an mbuf allocation flag. Use the correct M_NOWAIT malloc() flag. Fortunately, both were defined to 1, so this commit is a no-op.
2002-10-19 11:31:50 +00:00
rule = malloc(l, M_IPFW, M_NOWAIT | M_ZERO);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (rule == NULL)
return (ENOSPC);
bcopy(input_rule, rule, l);
rule->next = NULL;
rule->next_rule = NULL;
rule->pcnt = 0;
rule->bcnt = 0;
rule->timestamp = 0;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK(chain);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (chain->rules == NULL) { /* default rule */
chain->rules = rule;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
goto done;
}
/*
* If rulenum is 0, find highest numbered rule before the
* default rule, and add autoinc_step
*/
if (autoinc_step < 1)
autoinc_step = 1;
else if (autoinc_step > 1000)
autoinc_step = 1000;
if (rule->rulenum == 0) {
/*
* locate the highest numbered rule before default
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
for (f = chain->rules; f; f = f->next) {
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (f->rulenum == IPFW_DEFAULT_RULE)
break;
rule->rulenum = f->rulenum;
}
if (rule->rulenum < IPFW_DEFAULT_RULE - autoinc_step)
rule->rulenum += autoinc_step;
input_rule->rulenum = rule->rulenum;
}
/*
* Now insert the new rule in the right place in the sorted list.
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
for (prev = NULL, f = chain->rules; f; prev = f, f = f->next) {
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (f->rulenum > rule->rulenum) { /* found the location */
if (prev) {
rule->next = f;
prev->next = rule;
} else { /* head insert */
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule->next = chain->rules;
chain->rules = rule;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
break;
}
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
flush_rule_ptrs(chain);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
done:
static_count++;
static_len += l;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(chain);
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
DEB(printf("ipfw: installed rule %d, static count now %d\n",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
rule->rulenum, static_count);)
return (0);
}
/**
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
* Remove a static rule (including derived * dynamic rules)
* and place it on the ``reap list'' for later reclamation.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* The caller is in charge of clearing rule pointers to avoid
* dangling pointers.
* @return a pointer to the next entry.
* Arguments are not checked, so they better be correct.
*/
static struct ip_fw *
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
remove_rule(struct ip_fw_chain *chain, struct ip_fw *rule,
struct ip_fw *prev)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
struct ip_fw *n;
int l = RULESIZE(rule);
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK_ASSERT(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
n = rule->next;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK();
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
remove_dyn_rule(rule, NULL /* force removal */);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (prev == NULL)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
chain->rules = n;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
else
prev->next = n;
static_count--;
static_len -= l;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule->next = chain->reap;
chain->reap = rule;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return n;
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
/**
* Reclaim storage associated with a list of rules. This is
* typically the list created using remove_rule.
*/
static void
reap_rules(struct ip_fw *head)
{
struct ip_fw *rule;
while ((rule = head) != NULL) {
head = head->next;
if (DUMMYNET_LOADED)
ip_dn_ruledel_ptr(rule);
free(rule, M_IPFW);
}
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
* Remove all rules from a chain (except rules in set RESVD_SET
* unless kill_default = 1). The caller is responsible for
* reclaiming storage for the rules left in chain->reap.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
static void
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
free_chain(struct ip_fw_chain *chain, int kill_default)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
struct ip_fw *prev, *rule;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK_ASSERT(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
flush_rule_ptrs(chain); /* more efficient to do outside the loop */
for (prev = NULL, rule = chain->rules; rule ; )
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
if (kill_default || rule->set != RESVD_SET)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule = remove_rule(chain, rule, prev);
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
else {
prev = rule;
rule = rule->next;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
/**
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
* Remove all rules with given number, and also do set manipulation.
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
* Assumes chain != NULL && *chain != NULL.
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
*
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
* The argument is an u_int32_t. The low 16 bit are the rule or set number,
* the next 8 bits are the new set, the top 8 bits are the command:
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
*
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
* 0 delete rules with given number
* 1 delete rules with given set number
* 2 move rules with given number to new set
* 3 move rules with given set number to new set
* 4 swap sets with given numbers
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
* 5 delete rules with given number and with given set number
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
static int
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
del_entry(struct ip_fw_chain *chain, u_int32_t arg)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
struct ip_fw *prev = NULL, *rule;
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
u_int16_t rulenum; /* rule or old_set */
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
u_int8_t cmd, new_set;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
rulenum = arg & 0xffff;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
cmd = (arg >> 24) & 0xff;
new_set = (arg >> 16) & 0xff;
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
if (cmd > 5 || new_set > RESVD_SET)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return EINVAL;
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
if (cmd == 0 || cmd == 2 || cmd == 5) {
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
if (rulenum >= IPFW_DEFAULT_RULE)
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
return EINVAL;
} else {
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
if (rulenum > RESVD_SET) /* old_set */
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
return EINVAL;
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
}
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule = chain->rules;
chain->reap = NULL;
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
switch (cmd) {
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
case 0: /* delete rules with given number */
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
/*
* locate first rule to delete
*/
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
for (; rule->rulenum < rulenum; prev = rule, rule = rule->next)
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (rule->rulenum != rulenum) {
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(chain);
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
return EINVAL;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
}
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
/*
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
* flush pointers outside the loop, then delete all matching
* rules. prev remains the same throughout the cycle.
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
flush_rule_ptrs(chain);
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
while (rule->rulenum == rulenum)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule = remove_rule(chain, rule, prev);
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
case 1: /* delete all rules with given set number */
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
flush_rule_ptrs(chain);
rule = chain->rules;
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
while (rule->rulenum < IPFW_DEFAULT_RULE)
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
if (rule->set == rulenum)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule = remove_rule(chain, rule, prev);
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
else {
prev = rule;
rule = rule->next;
}
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
case 2: /* move rules with given number to new set */
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule = chain->rules;
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
for (; rule->rulenum < IPFW_DEFAULT_RULE; rule = rule->next)
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (rule->rulenum == rulenum)
rule->set = new_set;
break;
case 3: /* move rules with given set number to new set */
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
for (; rule->rulenum < IPFW_DEFAULT_RULE; rule = rule->next)
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (rule->set == rulenum)
rule->set = new_set;
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
case 4: /* swap two sets */
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
for (; rule->rulenum < IPFW_DEFAULT_RULE; rule = rule->next)
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
if (rule->set == rulenum)
rule->set = new_set;
else if (rule->set == new_set)
rule->set = rulenum;
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
break;
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
case 5: /* delete rules with given number and with given set number.
* rulenum - given rule number;
* new_set - given set number.
*/
for (; rule->rulenum < rulenum; prev = rule, rule = rule->next)
;
if (rule->rulenum != rulenum) {
IPFW_WUNLOCK(chain);
return (EINVAL);
}
flush_rule_ptrs(chain);
while (rule->rulenum == rulenum) {
if (rule->set == new_set)
rule = remove_rule(chain, rule, prev);
else {
prev = rule;
rule = rule->next;
}
}
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
/*
* Look for rules to reclaim. We grab the list before
* releasing the lock then reclaim them w/o the lock to
* avoid a LOR with dummynet.
*/
rule = chain->reap;
chain->reap = NULL;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (rule)
reap_rules(rule);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return 0;
}
/*
* Clear counters for a specific rule.
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
* The enclosing "table" is assumed locked.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
static void
clear_counters(struct ip_fw *rule, int log_only)
{
ipfw_insn_log *l = (ipfw_insn_log *)ACTION_PTR(rule);
if (log_only == 0) {
rule->bcnt = rule->pcnt = 0;
rule->timestamp = 0;
}
if (l->o.opcode == O_LOG)
l->log_left = l->max_log;
}
/**
* Reset some or all counters on firewall rules.
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
* The argument `arg' is an u_int32_t. The low 16 bit are the rule number,
* the next 8 bits are the set number, the top 8 bits are the command:
* 0 work with rules from all set's;
* 1 work with rules only from specified set.
* Specified rule number is zero if we want to clear all entries.
* log_only is 1 if we only want to reset logs, zero otherwise.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
static int
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
zero_entry(struct ip_fw_chain *chain, u_int32_t arg, int log_only)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
{
struct ip_fw *rule;
char *msg;
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
uint16_t rulenum = arg & 0xffff;
uint8_t set = (arg >> 16) & 0xff;
uint8_t cmd = (arg >> 24) & 0xff;
if (cmd > 1)
return (EINVAL);
if (cmd == 1 && set > RESVD_SET)
return (EINVAL);
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK(chain);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (rulenum == 0) {
norule_counter = 0;
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
for (rule = chain->rules; rule; rule = rule->next) {
/* Skip rules from another set. */
if (cmd == 1 && rule->set != set)
continue;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
clear_counters(rule, log_only);
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
msg = log_only ? "ipfw: All logging counts reset.\n" :
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
"ipfw: Accounting cleared.\n";
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
} else {
int cleared = 0;
/*
* We can have multiple rules with the same number, so we
* need to clear them all.
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
for (rule = chain->rules; rule; rule = rule->next)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (rule->rulenum == rulenum) {
while (rule && rule->rulenum == rulenum) {
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
if (cmd == 0 || rule->set == set)
clear_counters(rule, log_only);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
rule = rule->next;
}
cleared = 1;
break;
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (!cleared) { /* we did not find any matching rules */
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(chain);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return (EINVAL);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
msg = log_only ? "ipfw: Entry %d logging count reset.\n" :
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
"ipfw: Entry %d cleared.\n";
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (fw_verbose)
log(LOG_SECURITY | LOG_NOTICE, msg, rulenum);
return (0);
}
/*
* Check validity of the structure before insert.
* Fortunately rules are simple, so this mostly need to check rule sizes.
*/
static int
check_ipfw_struct(struct ip_fw *rule, int size)
{
int l, cmdlen = 0;
int have_action=0;
ipfw_insn *cmd;
if (size < sizeof(*rule)) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: rule too short\n");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return (EINVAL);
}
/* first, check for valid size */
l = RULESIZE(rule);
if (l != size) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: size mismatch (have %d want %d)\n", size, l);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return (EINVAL);
}
Validate the action pointer to be within the rule size, so that trying to add corrupt ipfw rules would not potentially panic the system or worse.
2004-09-30 17:42:00 +00:00
if (rule->act_ofs >= rule->cmd_len) {
printf("ipfw: bogus action offset (%u > %u)\n",
rule->act_ofs, rule->cmd_len - 1);
return (EINVAL);
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* Now go for the individual checks. Very simple ones, basically only
* instruction sizes.
*/
for (l = rule->cmd_len, cmd = rule->cmd ;
l > 0 ; l -= cmdlen, cmd += cmdlen) {
cmdlen = F_LEN(cmd);
if (cmdlen > l) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: opcode %d size truncated\n",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
cmd->opcode);
return EINVAL;
}
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
DEB(printf("ipfw: opcode %d\n", cmd->opcode);)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
switch (cmd->opcode) {
case O_PROBE_STATE:
case O_KEEP_STATE:
case O_PROTO:
case O_IP_SRC_ME:
case O_IP_DST_ME:
case O_LAYER2:
case O_IN:
case O_FRAG:
Add support to IPFW for classification based on "diverted" status (that is, input via a divert socket).
2004-10-03 00:26:35 +00:00
case O_DIVERTED:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IPOPT:
case O_IPTOS:
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
case O_IPPRECEDENCE:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IPVER:
case O_TCPWIN:
case O_TCPFLAGS:
case O_TCPOPTS:
case O_ESTAB:
Add a 'verrevpath' option that verifies the interface that a packet comes in on is the same interface that we would route out of to get to the packet's source address. Essentially automates an anti-spoofing check using the information in the routing table. Experimental. The usage and rule format for the feature may still be subject to change.
2003-03-15 01:13:00 +00:00
case O_VERREVPATH:
Add the option versrcreach to verify that a valid route to the source address of a packet exists in the routing table. The default route is ignored because it would match everything and render the check pointless. This option is very useful for routers with a complete view of the Internet (BGP) in the routing table to reject packets with spoofed or unrouteable source addresses. Example: ipfw add 1000 deny ip from any to any not versrcreach also known in Cisco-speak as: ip verify unicast source reachable-via any Reviewed by: luigi
2004-04-23 14:28:38 +00:00
case O_VERSRCREACH:
New ipfw option "antispoof": For incoming packets, the packet's source address is checked if it belongs to a directly connected network. If the network is directly connected, then the interface the packet came on in is compared to the interface the network is connected to. When incoming interface and directly connected interface are not the same, the packet does not match. Usage example: ipfw add deny ip from any to any not antispoof in Manpage education by: ru
2004-08-09 16:12:10 +00:00
case O_ANTISPOOF:
Implement the 'ipsec' option to match packets coming out of an ipsec tunnel. Should work with both regular and fast ipsec (mutually exclusive). See manpage for more details. Submitted by: Ari Suutari (ari.suutari@syncrontech.com) Revised by: sam MFC after: 1 week
2003-07-04 21:42:32 +00:00
case O_IPSEC:
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#ifdef INET6
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case O_IP6_SRC_ME:
case O_IP6_DST_ME:
case O_EXT_HDR:
case O_IP6:
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#endif
Add support for IPv4 only rules to IPFW2 now that it supports IPv6 as well. This is the last requirement before we can retire ip6fw. Reviewed by: dwhite, brooks(earlier version) Submitted by: dwhite (manpage) Silence from: -ipfw
2005-06-03 01:10:28 +00:00
case O_IP4:
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
case O_TAG:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (cmdlen != F_INSN_SIZE(ipfw_insn))
goto bad_size;
break;
case O_UID:
case O_GID:
Add the ability to associate ipfw rules with a specific prison ID. Since the only thing truly unique about a prison is it's ID, I figured this would be the most granular way of handling this. This commit makes the following changes: - Adds tokenizing and parsing for the ``jail'' command line option to the ipfw(8) userspace utility. - Append the ipfw opcode list with O_JAIL. - While Iam here, add a comment informing others that if they want to add additional opcodes, they should append them to the end of the list to avoid ABI breakage. - Add ``fw_prid'' to the ipfw ucred cache structure. - When initializing ucred cache, if the process is jailed, set fw_prid to the prison ID, otherwise set it to -1. - Update man page to reflect these changes. This change was a strong motivator behind the ucred caching mechanism in ipfw. A sample usage of this new functionality could be: ipfw add count ip from any to any jail 2 It should be noted that because ucred based constraints are only implemented for TCP and UDP packets, the same applies for jail associations. Conceptual head nod by: pjd Reviewed by: rwatson Approved by: bmilekic (mentor)
2004-08-12 22:06:55 +00:00
case O_JAIL:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_IP_SRC:
case O_IP_DST:
case O_TCPSEQ:
case O_TCPACK:
case O_PROB:
case O_ICMPTYPE:
if (cmdlen != F_INSN_SIZE(ipfw_insn_u32))
goto bad_size;
break;
case O_LIMIT:
if (cmdlen != F_INSN_SIZE(ipfw_insn_limit))
goto bad_size;
break;
case O_LOG:
if (cmdlen != F_INSN_SIZE(ipfw_insn_log))
goto bad_size;
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
((ipfw_insn_log *)cmd)->log_left =
((ipfw_insn_log *)cmd)->max_log;
break;
case O_IP_SRC_MASK:
case O_IP_DST_MASK:
Merge the handlers of O_IP_SRC_MASK and O_IP_DST_MASK opcodes, and support matching a list of addr/mask pairs so one can write more efficient rulesets which were not possible before e.g. add 100 skipto 1000 not src-ip 10.0.0.0/8,127.0.0.1/8,192.168.0.0/16 The change is fully backward compatible. ipfw2 and manpage commit to follow. MFC after: 3 days
2003-07-08 07:44:42 +00:00
/* only odd command lengths */
if ( !(cmdlen & 1) || cmdlen > 31)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
goto bad_size;
break;
case O_IP_SRC_SET:
case O_IP_DST_SET:
if (cmd->arg1 == 0 || cmd->arg1 > 256) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: invalid set size %d\n",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
cmd->arg1);
return EINVAL;
}
if (cmdlen != F_INSN_SIZE(ipfw_insn_u32) +
(cmd->arg1+31)/32 )
goto bad_size;
break;
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
case O_IP_SRC_LOOKUP:
case O_IP_DST_LOOKUP:
if (cmd->arg1 >= IPFW_TABLES_MAX) {
printf("ipfw: invalid table number %d\n",
cmd->arg1);
return (EINVAL);
}
if (cmdlen != F_INSN_SIZE(ipfw_insn) &&
cmdlen != F_INSN_SIZE(ipfw_insn_u32))
goto bad_size;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_MACADDR2:
if (cmdlen != F_INSN_SIZE(ipfw_insn_mac))
goto bad_size;
break;
Implement comments embedded into ipfw2 instructions. Since we already had 'O_NOP' instructions which always match, all I needed to do is allow the NOP command to have arbitrary length (i.e. move its label in a different part of the switch() which validates instructions). The kernel must know nothing about comments, everything else is done in userland (which will be described in the upcoming ipfw2.c commit).
2003-07-12 05:54:17 +00:00
case O_NOP:
Add support for multiple values and ranges for the "iplen", "ipttl", "ipid" options. This feature has been requested by several users. On passing, fix some minor bugs in the parser. This change is fully backward compatible so if you have an old /sbin/ipfw and a new kernel you are not in trouble (but you need to update /sbin/ipfw if you want to use the new features). Document the changes in the manpage. Now you can write things like ipfw add skipto 1000 iplen 0-500 which some people were asking to give preferential treatment to short packets. The 'MFC after' is just set as a reminder, because I still need to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately change the size of certain kernel structures; not that it matters a lot since ipfw2 is entirely optional and not the default...) PR: bin/48015 MFC after: 1 week
2003-06-22 17:33:19 +00:00
case O_IPID:
case O_IPTTL:
case O_IPLEN:
Add support to IPFW for matching by TCP data length.
2004-10-03 00:47:15 +00:00
case O_TCPDATALEN:
Implement internal (i.e. inside kernel) packet tagging using mbuf_tags(9). Since tags are kept while packet resides in kernelspace, it's possible to use other kernel facilities (like netgraph nodes) for altering those tags. Submitted by: Andrey Elsukov <bu7cher at yandex dot ru> Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru> Approved by: glebius (mentor) Idea from: OpenBSD PF MFC after: 1 month
2006-05-24 13:09:55 +00:00
case O_TAGGED:
Add support for multiple values and ranges for the "iplen", "ipttl", "ipid" options. This feature has been requested by several users. On passing, fix some minor bugs in the parser. This change is fully backward compatible so if you have an old /sbin/ipfw and a new kernel you are not in trouble (but you need to update /sbin/ipfw if you want to use the new features). Document the changes in the manpage. Now you can write things like ipfw add skipto 1000 iplen 0-500 which some people were asking to give preferential treatment to short packets. The 'MFC after' is just set as a reminder, because I still need to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately change the size of certain kernel structures; not that it matters a lot since ipfw2 is entirely optional and not the default...) PR: bin/48015 MFC after: 1 week
2003-06-22 17:33:19 +00:00
if (cmdlen < 1 || cmdlen > 31)
goto bad_size;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_MAC_TYPE:
case O_IP_SRCPORT:
Raise limit for port lists to 30 entries/ranges. Remove a duplicate "logging" message, and identify the firewall as ipfw2 in the boot message.
2002-08-19 04:45:01 +00:00
case O_IP_DSTPORT: /* XXX artificial limit, 30 port pairs */
if (cmdlen < 2 || cmdlen > 31)
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
goto bad_size;
break;
case O_RECV:
case O_XMIT:
case O_VIA:
if (cmdlen != F_INSN_SIZE(ipfw_insn_if))
goto bad_size;
break;
Add to IPFW the ability to do ALTQ classification/tagging.
2004-10-03 00:17:46 +00:00
case O_ALTQ:
if (cmdlen != F_INSN_SIZE(ipfw_insn_altq))
goto bad_size;
break;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_PIPE:
case O_QUEUE:
Garbage-collect now unused struct _ipfw_insn_pipe and flush_pipe_ptrs(), thus removing a few XXXes. Document the ABI breakage in UPDATING.
2005-11-29 08:59:41 +00:00
if (cmdlen != F_INSN_SIZE(ipfw_insn))
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
goto bad_size;
goto check_action;
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
case O_FORWARD_IP:
Do not allow 'ipfw fwd' command when IPFIREWALL_FORWARD is not compiled into the kernel. Return EINVAL instead.
2004-09-13 19:27:23 +00:00
#ifdef IPFIREWALL_FORWARD
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (cmdlen != F_INSN_SIZE(ipfw_insn_sa))
goto bad_size;
goto check_action;
Do not allow 'ipfw fwd' command when IPFIREWALL_FORWARD is not compiled into the kernel. Return EINVAL instead.
2004-09-13 19:27:23 +00:00
#else
return EINVAL;
#endif
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Recover normal behavior: return EINVAL to attempt to add a divert rule when module is built without IPDIVERT. Silence from: andre Approved by: julian (mentor)
2004-09-05 20:06:50 +00:00
case O_DIVERT:
case O_TEE:
Convert IPDIVERT into a loadable module. This makes use of the dynamic loadability of protocols. The call to divert_packet() is done through a function pointer. All semantics of IPDIVERT remain intact. If IPDIVERT is not loaded ipfw will refuse to install divert rules and natd will complain about 'protocol not supported'. Once it is loaded both will work and accept rules and open the divert socket. The module can only be unloaded if no divert sockets are open. It does not close any divert sockets when an unload is requested but will return EBUSY instead.
2004-10-19 21:14:57 +00:00
if (ip_divert_ptr == NULL)
return EINVAL;
Jump to common action checks after doing specific once. This fixes adding of divert rules, which I break in previous commit. Pointy hat to: glebius
2005-02-06 11:13:59 +00:00
else
goto check_size;
Add a ng_ipfw node, implementing a quick and simple interface between ipfw(4) and netgraph(4) facilities. Reviewed by: andre, brooks, julian
2005-02-05 12:06:33 +00:00
case O_NETGRAPH:
case O_NGTEE:
if (!NG_IPFW_LOADED)
return EINVAL;
Jump to common action checks after doing specific once. This fixes adding of divert rules, which I break in previous commit. Pointy hat to: glebius
2005-02-06 11:13:59 +00:00
else
goto check_size;
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
case O_NAT:
Prevent adding a rule with a nat action in case IPFIREWALL_NAT was not defined. Reviewed: luigi
2007-01-05 12:15:31 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
if (cmdlen != F_INSN_SIZE(ipfw_insn_nat))
goto bad_size;
goto check_action;
Prevent adding a rule with a nat action in case IPFIREWALL_NAT was not defined. Reviewed: luigi
2007-01-05 12:15:31 +00:00
#else
return EINVAL;
#endif
Implement the last 2-3 missing instructions for ipfw, now it should support all the instructions of the old ipfw. Fix some bugs in the user interface, /sbin/ipfw. Please check this code against your rulesets, so i can fix the remaining bugs (if any, i think they will be mostly in /sbin/ipfw). Once we have done a bit of testing, this code is ready to be MFC'ed, together with a bunch of other changes (glue to ipfw, and also the removal of some global variables) which have been in -current for a couple of weeks now. MFC after: 7 days
2002-07-05 22:43:06 +00:00
case O_FORWARD_MAC: /* XXX not implemented yet */
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_CHECK_STATE:
case O_COUNT:
case O_ACCEPT:
case O_DENY:
case O_REJECT:
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#ifdef INET6
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
case O_UNREACH6:
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#endif
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
case O_SKIPTO:
Jump to common action checks after doing specific once. This fixes adding of divert rules, which I break in previous commit. Pointy hat to: glebius
2005-02-06 11:13:59 +00:00
check_size:
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (cmdlen != F_INSN_SIZE(ipfw_insn))
goto bad_size;
check_action:
if (have_action) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: opcode %d, multiple actions"
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
" not allowed\n",
cmd->opcode);
return EINVAL;
}
have_action = 1;
if (l != cmdlen) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: opcode %d, action must be"
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
" last opcode\n",
cmd->opcode);
return EINVAL;
}
break;
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#ifdef INET6
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
case O_IP6_SRC:
case O_IP6_DST:
if (cmdlen != F_INSN_SIZE(struct in6_addr) +
F_INSN_SIZE(ipfw_insn))
goto bad_size;
break;
case O_FLOW6ID:
if (cmdlen != F_INSN_SIZE(ipfw_insn_u32) +
((ipfw_insn_u32 *)cmd)->o.arg1)
goto bad_size;
break;
case O_IP6_SRC_MASK:
case O_IP6_DST_MASK:
if ( !(cmdlen & 1) || cmdlen > 127)
goto bad_size;
break;
case O_ICMP6TYPE:
if( cmdlen != F_INSN_SIZE( ipfw_insn_icmp6 ) )
goto bad_size;
break;
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
#endif
Add IPv6 support to IPFW and Dummynet. Submitted by: Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default:
Fix panic when kernel compiled without INET6 by rejecting IPv6 opcodes which are behind #if(n)def INET6 now. PR: kern/85826 MFC after: 3 days
2005-09-14 07:53:54 +00:00
switch (cmd->opcode) {
#ifndef INET6
case O_IP6_SRC_ME:
case O_IP6_DST_ME:
case O_EXT_HDR:
case O_IP6:
case O_UNREACH6:
case O_IP6_SRC:
case O_IP6_DST:
case O_FLOW6ID:
case O_IP6_SRC_MASK:
case O_IP6_DST_MASK:
case O_ICMP6TYPE:
printf("ipfw: no IPv6 support in kernel\n");
return EPROTONOSUPPORT;
#endif
default:
printf("ipfw: opcode %d, unknown opcode\n",
cmd->opcode);
return EINVAL;
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
}
if (have_action == 0) {
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: missing action\n");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
return EINVAL;
}
return 0;
bad_size:
No functional changes, but: Following Darren's suggestion, make Dijkstra happy and rewrite the ipfw_chk() main loop removing a lot of goto's and using instead a variable to store match status. Add a lot of comments to explain what instructions are supposed to do and how -- this should ease auditing of the code and make people more confident with it. In terms of code size: the entire file takes about 12700 bytes of text, about 3K of which are for the main function, ipfw_chk(), and 2K (ouch!) for ipfw_log().
2002-07-08 22:46:01 +00:00
printf("ipfw: opcode %d size %d wrong\n",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
cmd->opcode, cmdlen);
return EINVAL;
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
/*
* Copy the static and dynamic rules to the supplied buffer
* and return the amount of space actually used.
*/
static size_t
ipfw_getrules(struct ip_fw_chain *chain, void *buf, size_t space)
{
char *bp = buf;
char *ep = bp + space;
struct ip_fw *rule;
int i;
Since we switched to using monatomically increasing timestamps, they have been reported back to the userland as being in 1970. Add boot time to the timestamp to give the time in the scale of the 'current' real timescale. Not perfect if you change the time a lot but good enough to keep all the rules correct relative to each other correct in terms of time relative to "now".
2007-04-03 22:45:50 +00:00
time_t boot_seconds;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
Since we switched to using monatomically increasing timestamps, they have been reported back to the userland as being in 1970. Add boot time to the timestamp to give the time in the scale of the 'current' real timescale. Not perfect if you change the time a lot but good enough to keep all the rules correct relative to each other correct in terms of time relative to "now".
2007-04-03 22:45:50 +00:00
boot_seconds = boottime.tv_sec;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
/* XXX this can take a long time and locking will block packet flow */
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RLOCK(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
for (rule = chain->rules; rule ; rule = rule->next) {
/*
* Verify the entry fits in the buffer in case the
* rules changed between calculating buffer space and
* now. This would be better done using a generation
* number but should suffice for now.
*/
i = RULESIZE(rule);
if (bp + i <= ep) {
bcopy(rule, bp, i);
Since we switched to using monatomically increasing timestamps, they have been reported back to the userland as being in 1970. Add boot time to the timestamp to give the time in the scale of the 'current' real timescale. Not perfect if you change the time a lot but good enough to keep all the rules correct relative to each other correct in terms of time relative to "now".
2007-04-03 22:45:50 +00:00
/*
* XXX HACK. Store the disable mask in the "next" pointer
* in a wild attempt to keep the ABI the same.
* Why do we do this on EVERY rule?
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
bcopy(&set_disable, &(((struct ip_fw *)bp)->next_rule),
sizeof(set_disable));
Since we switched to using monatomically increasing timestamps, they have been reported back to the userland as being in 1970. Add boot time to the timestamp to give the time in the scale of the 'current' real timescale. Not perfect if you change the time a lot but good enough to keep all the rules correct relative to each other correct in terms of time relative to "now".
2007-04-03 22:45:50 +00:00
if (((struct ip_fw *)bp)->timestamp)
((struct ip_fw *)bp)->timestamp += boot_seconds;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
bp += i;
}
}
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_RUNLOCK(chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (ipfw_dyn_v) {
ipfw_dyn_rule *p, *last = NULL;
IPFW_DYN_LOCK();
for (i = 0 ; i < curr_dyn_buckets; i++)
for (p = ipfw_dyn_v[i] ; p != NULL; p = p->next) {
if (bp + sizeof *p <= ep) {
ipfw_dyn_rule *dst =
(ipfw_dyn_rule *)bp;
bcopy(p, dst, sizeof *p);
bcopy(&(p->rule->rulenum), &(dst->rule),
sizeof(p->rule->rulenum));
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
/*
* store set number into high word of
* dst->rule pointer.
*/
o Fix bug I introduced in the previous commit (ipfw set extention): pack a set number correctly. Submitted by: oleg o Plug a memory leak. Submitted by: oleg and Andrey V. Elsukov Approved by: re (kensmith) MFC after: 1 week
2007-08-26 18:38:31 +00:00
bcopy(&(p->rule->set),
(char *)&dst->rule +
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
sizeof(p->rule->rulenum),
sizeof(p->rule->set));
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
/*
* store a non-null value in "next".
* The userland code will interpret a
* NULL here as a marker
* for the last dynamic rule.
*/
bcopy(&dst, &dst->next, sizeof(dst));
last = dst;
dst->expire =
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
TIME_LEQ(dst->expire, time_uptime) ?
0 : dst->expire - time_uptime ;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
bp += sizeof(ipfw_dyn_rule);
}
}
IPFW_DYN_UNLOCK();
if (last != NULL) /* mark last dynamic rule */
bzero(&last->next, sizeof(last));
}
return (bp - (char *)buf);
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/**
* {set|get}sockopt parser.
*/
static int
ipfw_ctl(struct sockopt *sopt)
{
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
#define RULE_MAXSIZE (256*sizeof(u_int32_t))
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
int error;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
size_t size;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
struct ip_fw *buf, *rule;
u_int32_t rulenum[2];
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
error = priv_check(sopt->sopt_td, PRIV_NETINET_IPFW);
Add a super-user check to ipfw_ctl() to make sure that the calling process is a non-prison root. The security.jail.allow_raw_sockets sysctl variable is disabled by default, however if the user enables raw sockets in prisons, prison-root should not be able to interact with firewall rule sets. Approved by: rwatson, bmilekic (mentor)
2004-05-25 15:02:12 +00:00
if (error)
return (error);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
/*
* Disallow modifications in really-really secure mode, but still allow
* the logging counters to be reset.
*/
if (sopt->sopt_name == IP_FW_ADD ||
(sopt->sopt_dir == SOPT_SET && sopt->sopt_name != IP_FW_RESETLOG)) {
error = securelevel_ge(sopt->sopt_td->td_ucred, 3);
if (error)
return (error);
}
error = 0;
switch (sopt->sopt_name) {
case IP_FW_GET:
/*
* pass up a copy of the current rules. Static rules
* come first (the last of which has number IPFW_DEFAULT_RULE),
* followed by a possibly empty list of dynamic rule.
* The last dynamic rule has NULL in the "next" field.
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
*
* Note that the calculated size is used to bound the
* amount of data returned to the user. The rule set may
* change between calculating the size and returning the
* data in which case we'll just return what fits.
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
*/
size = static_len; /* size of static rules */
if (ipfw_dyn_v) /* add size of dyn.rules */
size += (dyn_count * sizeof(ipfw_dyn_rule));
/*
* XXX todo: if the user passes a short length just to know
* how much room is needed, do not bother filling up the
* buffer, just jump to the sooptcopyout.
*/
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
buf = malloc(size, M_TEMP, M_WAITOK);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
error = sooptcopyout(sopt, buf,
ipfw_getrules(&layer3_chain, buf, size));
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
free(buf, M_TEMP);
break;
case IP_FW_FLUSH:
/*
* Normally we cannot release the lock on each iteration.
* We could do it here only because we start from the head all
* the times so there is no risk of missing some entries.
* On the other hand, the risk is that we end up with
* a very inconsistent ruleset, so better keep the lock
* around the whole cycle.
Kill EOL spaces. Approved by: luigi MFC after: 1 week
2002-10-23 10:07:55 +00:00
*
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
* XXX this code can be improved by resetting the head of
* the list to point to the default rule, and then freeing
* the old list without the need for a lock.
*/
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK(&layer3_chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
layer3_chain.reap = NULL;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
free_chain(&layer3_chain, 0 /* keep default rule */);
Do not leak memory while flushing rules. Noticed by: yar Approved by: glebius (mentor) MFC after: 1 week
2006-08-02 14:58:51 +00:00
rule = layer3_chain.reap;
layer3_chain.reap = NULL;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(&layer3_chain);
Do not leak memory while flushing rules. Noticed by: yar Approved by: glebius (mentor) MFC after: 1 week
2006-08-02 14:58:51 +00:00
if (rule != NULL)
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
reap_rules(rule);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
case IP_FW_ADD:
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
rule = malloc(RULE_MAXSIZE, M_TEMP, M_WAITOK);
error = sooptcopyin(sopt, rule, RULE_MAXSIZE,
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
sizeof(struct ip_fw) );
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (error == 0)
error = check_ipfw_struct(rule, sopt->sopt_valsize);
if (error == 0) {
error = add_rule(&layer3_chain, rule);
size = RULESIZE(rule);
if (!error && sopt->sopt_dir == SOPT_GET)
error = sooptcopyout(sopt, rule, size);
}
free(rule, M_TEMP);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
case IP_FW_DEL:
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
/*
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
* IP_FW_DEL is used for deleting single rules or sets,
* and (ab)used to atomically manipulate sets. Argument size
* is used to distinguish between the two:
* sizeof(u_int32_t)
* delete single rule or set of rules,
* or reassign rules (or sets) to a different set.
* 2*sizeof(u_int32_t)
* atomic disable/enable sets.
* first u_int32_t contains sets to be disabled,
* second u_int32_t contains sets to be enabled.
One bugfix and one new feature. The bugfix (ipfw2.c) makes the handling of port numbers with a dash in the name, e.g. ftp-data, consistent with old ipfw: use \\ before the - to consider it as part of the name and not a range separator. The new feature (all this description will go in the manpage): each rule now belongs to one of 32 different sets, which can be optionally specified in the following form: ipfw add 100 set 23 allow ip from any to any If "set N" is not specified, the rule belongs to set 0. Individual sets can be disabled, enabled, and deleted with the commands: ipfw disable set N ipfw enable set N ipfw delete set N Enabling/disabling of a set is atomic. Rules belonging to a disabled set are skipped during packet matching, and they are not listed unless you use the '-S' flag in the show/list commands. Note that dynamic rules, once created, are always active until they expire or their parent rule is deleted. Set 31 is reserved for the default rule and cannot be disabled. All sets are enabled by default. The enable/disable status of the sets can be shown with the command ipfw show sets Hopefully, this feature will make life easier to those who want to have atomic ruleset addition/deletion/tests. Examples: To add a set of rules atomically: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 To delete a set of rules atomically ipfw disable set 18 ipfw delete set 18 ipfw enable set 18 To test a ruleset and disable it and regain control if something goes wrong: ipfw disable set 18 ipfw add ... set 18 ... # repeat as needed ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18 here if everything goes well, you press control-C before the "sleep" terminates, and your ruleset will be left active. Otherwise, e.g. if you cannot access your box, the ruleset will be disabled after the sleep terminates. I think there is only one more thing that one might want, namely a command to assign all rules in set X to set Y, so one can test a ruleset using the above mechanisms, and once it is considered acceptable, make it part of an existing ruleset.
2002-08-10 04:37:32 +00:00
*/
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
error = sooptcopyin(sopt, rulenum,
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
2*sizeof(u_int32_t), sizeof(u_int32_t));
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (error)
break;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
size = sopt->sopt_valsize;
if (size == sizeof(u_int32_t)) /* delete or reassign */
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
error = del_entry(&layer3_chain, rulenum[0]);
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
else if (size == 2*sizeof(u_int32_t)) /* set enable/disable */
set_disable =
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
(set_disable | rulenum[0]) & ~rulenum[1] &
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
~(1<<RESVD_SET); /* set RESVD_SET always enabled */
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
else
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
error = EINVAL;
break;
case IP_FW_ZERO:
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
case IP_FW_RESETLOG: /* argument is an u_int_32, the rule number */
rulenum[0] = 0;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (sopt->sopt_val != 0) {
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
error = sooptcopyin(sopt, rulenum,
sizeof(u_int32_t), sizeof(u_int32_t));
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
if (error)
break;
}
o Make ipfw set more robust -- now it is possible: - to show a specific set: ipfw set 3 show - to delete rules from the set: ipfw set 9 delete 100 200 300 - to flush the set: ipfw set 4 flush - to reset rules counters in the set: ipfw set 1 zero PR: kern/113388 Submitted by: Andrey V. Elsukov Approved by: re (kensmith) MFC after: 6 weeks
2007-06-18 17:52:37 +00:00
error = zero_entry(&layer3_chain, rulenum[0],
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
sopt->sopt_name == IP_FW_RESETLOG);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
break;
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
case IP_FW_TABLE_ADD:
{
ipfw_table_entry ent;
error = sooptcopyin(sopt, &ent,
sizeof(ent), sizeof(ent));
if (error)
break;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
error = add_table_entry(&layer3_chain, ent.tbl,
ent.addr, ent.masklen, ent.value);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
}
break;
case IP_FW_TABLE_DEL:
{
ipfw_table_entry ent;
error = sooptcopyin(sopt, &ent,
sizeof(ent), sizeof(ent));
if (error)
break;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
error = del_table_entry(&layer3_chain, ent.tbl,
ent.addr, ent.masklen);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
}
break;
case IP_FW_TABLE_FLUSH:
{
u_int16_t tbl;
error = sooptcopyin(sopt, &tbl,
sizeof(tbl), sizeof(tbl));
if (error)
break;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_WLOCK(&layer3_chain);
error = flush_table(&layer3_chain, tbl);
IPFW_WUNLOCK(&layer3_chain);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
}
break;
case IP_FW_TABLE_GETSIZE:
{
u_int32_t tbl, cnt;
if ((error = sooptcopyin(sopt, &tbl, sizeof(tbl),
sizeof(tbl))))
break;
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_RLOCK(&layer3_chain);
- Do not leak read lock in IP_FW_TABLE_GETSIZE case of ipfw_ctl(). - Acquire read (not write) lock in case of IP_FW_TABLE_LIST. In collaboration with: ru
2006-03-03 12:10:59 +00:00
error = count_table(&layer3_chain, tbl, &cnt);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
IPFW_RUNLOCK(&layer3_chain);
- Do not leak read lock in IP_FW_TABLE_GETSIZE case of ipfw_ctl(). - Acquire read (not write) lock in case of IP_FW_TABLE_LIST. In collaboration with: ru
2006-03-03 12:10:59 +00:00
if (error)
break;
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
error = sooptcopyout(sopt, &cnt, sizeof(cnt));
}
break;
case IP_FW_TABLE_LIST:
{
ipfw_table *tbl;
if (sopt->sopt_valsize < sizeof(*tbl)) {
error = EINVAL;
break;
}
size = sopt->sopt_valsize;
tbl = malloc(size, M_TEMP, M_WAITOK);
error = sooptcopyin(sopt, tbl, size, sizeof(*tbl));
if (error) {
free(tbl, M_TEMP);
break;
}
tbl->size = (size - sizeof(*tbl)) /
sizeof(ipfw_table_entry);
- Do not leak read lock in IP_FW_TABLE_GETSIZE case of ipfw_ctl(). - Acquire read (not write) lock in case of IP_FW_TABLE_LIST. In collaboration with: ru
2006-03-03 12:10:59 +00:00
IPFW_RLOCK(&layer3_chain);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
error = dump_table(&layer3_chain, tbl);
- Do not leak read lock in IP_FW_TABLE_GETSIZE case of ipfw_ctl(). - Acquire read (not write) lock in case of IP_FW_TABLE_LIST. In collaboration with: ru
2006-03-03 12:10:59 +00:00
IPFW_RUNLOCK(&layer3_chain);
Introduce a new feature to IPFW2: lookup tables. These are useful for handling large sparse address sets. Initial implementation by Vsevolod Lobko <seva@ip.net.ua>, refined by me. MFC after: 1 week
2004-06-09 20:10:38 +00:00
if (error) {
free(tbl, M_TEMP);
break;
}
error = sooptcopyout(sopt, tbl, size);
free(tbl, M_TEMP);
}
break;
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
case IP_FW_NAT_CFG:
{
struct cfg_nat *ptr, *ser_n;
char *buf;
buf = malloc(NAT_BUF_LEN, M_IPFW, M_WAITOK | M_ZERO);
error = sooptcopyin(sopt, buf, NAT_BUF_LEN,
sizeof(struct cfg_nat));
ser_n = (struct cfg_nat *)buf;
/*
* Find/create nat rule.
*/
IPFW_WLOCK(&layer3_chain);
ptr = lookup_nat(ser_n->id);
if (ptr == NULL) {
/* New rule: allocate and init new instance. */
ptr = malloc(sizeof(struct cfg_nat),
M_IPFW, M_NOWAIT | M_ZERO);
if (ptr == NULL) {
IPFW_WUNLOCK(&layer3_chain);
free(buf, M_IPFW);
return (ENOSPC);
}
ptr->lib = LibAliasInit(NULL);
if (ptr->lib == NULL) {
IPFW_WUNLOCK(&layer3_chain);
free(ptr, M_IPFW);
free(buf, M_IPFW);
return (EINVAL);
}
LIST_INIT(&ptr->redir_chain);
} else {
/* Entry already present: temporarly unhook it. */
UNHOOK_NAT(ptr);
flush_nat_ptrs(ser_n->id);
}
IPFW_WUNLOCK(&layer3_chain);
/*
* Basic nat configuration.
*/
ptr->id = ser_n->id;
/*
* XXX - what if this rule doesn't nat any ip and just
* redirect?
* do we set aliasaddress to 0.0.0.0?
*/
ptr->ip = ser_n->ip;
ptr->redir_cnt = ser_n->redir_cnt;
ptr->mode = ser_n->mode;
LibAliasSetMode(ptr->lib, ser_n->mode, ser_n->mode);
LibAliasSetAddress(ptr->lib, ptr->ip);
memcpy(ptr->if_name, ser_n->if_name, IF_NAMESIZE);
/*
* Redir and LSNAT configuration.
*/
/* Delete old cfgs. */
del_redir_spool_cfg(ptr, &ptr->redir_chain);
/* Add new entries. */
add_redir_spool_cfg(&buf[(sizeof(struct cfg_nat))], ptr);
free(buf, M_IPFW);
IPFW_WLOCK(&layer3_chain);
HOOK_NAT(&layer3_chain.nat, ptr);
IPFW_WUNLOCK(&layer3_chain);
}
break;
case IP_FW_NAT_DEL:
{
struct cfg_nat *ptr;
int i;
error = sooptcopyin(sopt, &i, sizeof i, sizeof i);
IPFW_WLOCK(&layer3_chain);
ptr = lookup_nat(i);
if (ptr == NULL) {
error = EINVAL;
IPFW_WUNLOCK(&layer3_chain);
break;
}
UNHOOK_NAT(ptr);
flush_nat_ptrs(i);
IPFW_WUNLOCK(&layer3_chain);
del_redir_spool_cfg(ptr, &ptr->redir_chain);
LibAliasUninit(ptr->lib);
free(ptr, M_IPFW);
}
break;
case IP_FW_NAT_GET_CONFIG:
{
uint8_t *data;
struct cfg_nat *n;
struct cfg_redir *r;
struct cfg_spool *s;
int nat_cnt, off;
nat_cnt = 0;
off = sizeof(nat_cnt);
data = malloc(NAT_BUF_LEN, M_IPFW, M_WAITOK | M_ZERO);
IPFW_RLOCK(&layer3_chain);
/* Serialize all the data. */
LIST_FOREACH(n, &layer3_chain.nat, _next) {
nat_cnt++;
if (off + SOF_NAT < NAT_BUF_LEN) {
bcopy(n, &data[off], SOF_NAT);
off += SOF_NAT;
LIST_FOREACH(r, &n->redir_chain, _next) {
if (off + SOF_REDIR < NAT_BUF_LEN) {
bcopy(r, &data[off],
SOF_REDIR);
off += SOF_REDIR;
LIST_FOREACH(s, &r->spool_chain,
_next) {
if (off + SOF_SPOOL <
NAT_BUF_LEN) {
bcopy(s,
&data[off],
SOF_SPOOL);
off +=
SOF_SPOOL;
} else
goto nospace;
}
} else
goto nospace;
}
} else
goto nospace;
}
bcopy(&nat_cnt, data, sizeof(nat_cnt));
IPFW_RUNLOCK(&layer3_chain);
error = sooptcopyout(sopt, data, NAT_BUF_LEN);
free(data, M_IPFW);
break;
nospace:
IPFW_RUNLOCK(&layer3_chain);
printf("serialized data buffer not big enough:"
"please increase NAT_BUF_LEN\n");
free(data, M_IPFW);
}
break;
case IP_FW_NAT_GET_LOG:
{
uint8_t *data;
struct cfg_nat *ptr;
int i, size, cnt, sof;
data = NULL;
sof = LIBALIAS_BUF_SIZE;
cnt = 0;
IPFW_RLOCK(&layer3_chain);
size = i = 0;
LIST_FOREACH(ptr, &layer3_chain.nat, _next) {
if (ptr->lib->logDesc == NULL)
continue;
cnt++;
size = cnt * (sof + sizeof(int));
data = realloc(data, size, M_IPFW, M_NOWAIT | M_ZERO);
if (data == NULL) {
IPFW_RUNLOCK(&layer3_chain);
return (ENOSPC);
}
bcopy(&ptr->id, &data[i], sizeof(int));
i += sizeof(int);
bcopy(ptr->lib->logDesc, &data[i], sof);
i += sof;
}
IPFW_RUNLOCK(&layer3_chain);
error = sooptcopyout(sopt, data, size);
free(data, M_IPFW);
}
break;
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default:
o De-anonymity dummynet(4) and ipfw(4) messages, prepend them by 'dummynet: ' and 'ipfw: ' prefixes. PR: kern/41609
2002-12-24 13:45:24 +00:00
printf("ipfw: ipfw_ctl invalid option %d\n", sopt->sopt_name);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
error = EINVAL;
}
return (error);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
#undef RULE_MAXSIZE
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
/**
* dummynet needs a reference to the default rule, because rules can be
* deleted while packets hold a reference to them. When this happens,
* dummynet changes the reference to the default rule (it could well be a
* NULL pointer, but this way we do not need to check for the special
* case, plus here he have info on the default behaviour).
*/
struct ip_fw *ip_fw_default_rule;
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
/*
* This procedure is only used to handle keepalives. It is invoked
* every dyn_keepalive_period
*/
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
static void
ipfw_tick(void * __unused unused)
{
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
struct mbuf *m0, *m, *mnext, **mtailp;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
int i;
ipfw_dyn_rule *q;
if (dyn_keepalive == 0 || ipfw_dyn_v == NULL || dyn_count == 0)
goto done;
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
/*
* We make a chain of packets to go out here -- not deferring
* until after we drop the IPFW dynamic rule lock would result
* in a lock order reversal with the normal packet input -> ipfw
* call stack.
*/
m0 = NULL;
mtailp = &m0;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK();
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
for (i = 0 ; i < curr_dyn_buckets ; i++) {
for (q = ipfw_dyn_v[i] ; q ; q = q->next ) {
if (q->dyn_type == O_LIMIT_PARENT)
continue;
if (q->id.proto != IPPROTO_TCP)
continue;
if ( (q->state & BOTH_SYN) != BOTH_SYN)
continue;
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (TIME_LEQ( time_uptime+dyn_keepalive_interval,
sys/netinet/ip_fw2.c: Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops for firewall-generated packets (the constant has to go in sys/mbuf.h). Better comments on keepalive generation, and enforce dyn_rst_lifetime and dyn_fin_lifetime to be less than dyn_keepalive_period. Enforce limits (up to 64k) on the number of dynamic buckets, and retry allocation with smaller sizes. Raise default number of dynamic rules to 4096. Improved handling of set of rules -- now you can atomically enable/disable multiple sets, move rules from one set to another, and swap sets. sbin/ipfw/ipfw2.c: userland support for "noerror" pipe attribute. userland support for sets of rules. minor improvements on rule parsing and printing. sbin/ipfw/ipfw.8: more documentation on ipfw2 extensions, differences from ipfw1 (so we can use the same manpage for both), stateful rules, and some additional examples. Feedback and more examples needed here.
2002-08-16 10:31:47 +00:00
q->expire))
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
continue; /* too early */
Use monotonic 'time_uptime' instead of 'time_second' as timebase for timeouts.
2005-09-19 22:31:45 +00:00
if (TIME_LEQ(q->expire, time_uptime))
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
continue; /* too late, rule expired */
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
*mtailp = send_pkt(NULL, &(q->id), q->ack_rev - 1,
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
q->ack_fwd, TH_SYN);
if (*mtailp != NULL)
mtailp = &(*mtailp)->m_nextpkt;
Introduce a new entry point, mac_create_mbuf_from_firewall. This entry point exists to allow the mandatory access control policy to properly initialize mbufs generated by the firewall. An example where this might happen is keep alive packets, or ICMP error packets in response to other packets. This takes care of kernel panics associated with un-initialize mbuf labels when the firewall generates packets. [1] I modified this patch from it's original version, the initial patch introduced a number of entry points which were programmatically equivalent. So I introduced only one. Instead, we should leverage mac_create_mbuf_netlayer() which is used for similar situations, an example being icmp_error() This will minimize the impact associated with the MFC Submitted by: mlaier [1] MFC after: 1 week This is a RELENG_6 candidate
2006-09-12 04:25:13 +00:00
*mtailp = send_pkt(NULL, &(q->id), q->ack_fwd - 1,
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
q->ack_rev, 0);
if (*mtailp != NULL)
mtailp = &(*mtailp)->m_nextpkt;
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
}
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_UNLOCK();
Modify send_pkt() to return the generated packet and have the caller do the subsequent ip_output() in IPFW. In ipfw_tick(), the keep-alive packets must be generated from the data that resides under the stateful lock, but they must not be sent at that time, as this would cause a lock order reversal with the normal ordering (interface's lock, then locks belonging to the pfil hooks). In practice, this caused deadlocks when using IPFW and if_bridge(4) together to do stateful transparent filtering. MFC after: 1 week
2005-06-10 12:28:17 +00:00
for (m = mnext = m0; m != NULL; m = mnext) {
mnext = m->m_nextpkt;
m->m_nextpkt = NULL;
ip_output(m, NULL, NULL, 0, NULL, NULL);
}
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
done:
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
callout_reset(&ipfw_timeout, dyn_keepalive_period*hz, ipfw_tick, NULL);
Implement keepalives for dynamic rules, so they will not expire just because you leave your session idle. Also, put in a fix for 64-bit architectures (to be revised). In detail: ip_fw.h * Reorder fields in struct ip_fw to avoid alignment problems on 64-bit machines. This only masks the problem, I am still not sure whether I am doing something wrong in the code or there is a problem elsewhere (e.g. different aligmnent of structures between userland and kernel because of pragmas etc.) * added fields in dyn_rule to store ack numbers, so we can generate keepalives when the dynamic rule is about to expire ip_fw2.c * use a local function, send_pkt(), to generate TCP RST for Reset rules; * save about 250 bytes by cleaning up the various snprintf() in ipfw_log() ... * ... and use twice as many bytes to implement keepalives (this seems to be working, but i have not tested it extensively). Keepalives are generated once every 5 seconds for the last 20 seconds of the lifetime of a dynamic rule for an established TCP flow. The packets are sent to both sides, so if at least one of the endpoints is responding, the timeout is refreshed and the rule will not expire. You can disable this feature with sysctl net.inet.ip.fw.dyn_keepalive=0 (the default is 1, to have them enabled). MFC after: 1 day (just kidding... I will supply an updated version of ipfw2 for RELENG_4 tomorrow).
2002-07-14 23:47:18 +00:00
}
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
int
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
ipfw_init(void)
{
struct ip_fw default_rule;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
int error;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Fix broken build of rev. 1.108 in case of no INET6 and IPFIREWALL compiled into kernel. Spotted and tested by: Michal Mertl <mime at traveller.cz>
2005-08-14 18:20:33 +00:00
#ifdef INET6
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
/* Setup IPv6 fw sysctl tree. */
sysctl_ctx_init(&ip6_fw_sysctl_ctx);
ip6_fw_sysctl_tree = SYSCTL_ADD_NODE(&ip6_fw_sysctl_ctx,
Reintroduce net.inet6.ip6.fw.enable sysctl to dis/enable the ipv6 processing seperately. Also use pfil hook/unhook instead of keeping the check functions in pfil just to return there based on the sysctl. While here fix some whitespace on a nearby SYSCTL_ macro.
2006-05-12 04:41:27 +00:00
SYSCTL_STATIC_CHILDREN(_net_inet6_ip6), OID_AUTO, "fw",
CTLFLAG_RW | CTLFLAG_SECURE, 0, "Firewall");
SYSCTL_ADD_PROC(&ip6_fw_sysctl_ctx, SYSCTL_CHILDREN(ip6_fw_sysctl_tree),
OID_AUTO, "enable", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE3,
&fw6_enable, 0, ipfw_chg_hook, "I", "Enable ipfw+6");
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
SYSCTL_ADD_INT(&ip6_fw_sysctl_ctx, SYSCTL_CHILDREN(ip6_fw_sysctl_tree),
Reintroduce net.inet6.ip6.fw.enable sysctl to dis/enable the ipv6 processing seperately. Also use pfil hook/unhook instead of keeping the check functions in pfil just to return there based on the sysctl. While here fix some whitespace on a nearby SYSCTL_ macro.
2006-05-12 04:41:27 +00:00
OID_AUTO, "deny_unknown_exthdrs", CTLFLAG_RW | CTLFLAG_SECURE,
&fw_deny_unknown_exthdrs, 0,
"Deny packets with unknown IPv6 Extension Headers");
Fix broken build of rev. 1.108 in case of no INET6 and IPFIREWALL compiled into kernel. Spotted and tested by: Michal Mertl <mime at traveller.cz>
2005-08-14 18:20:33 +00:00
#endif
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
layer3_chain.rules = NULL;
IPFW_LOCK_INIT(&layer3_chain);
Shorten text string for ip_fw2 dynamic rules zone by removing the word "zone", which is generally not present in zone names. This reduces the incidence of line-wrapping in "vmstat -z " using 80-column displays. MFC after: 3 days
2007-04-17 09:28:36 +00:00
ipfw_dyn_rule_zone = uma_zcreate("IPFW dynamic rule",
Change the state allocator from using regular malloc to using a UMA zone instead. This should eliminate a bit of the locking overhead associated with with malloc and reduce the memory consumption associated with each new state. Reviewed by: rwatson, andre Silence on: ipfw@ MFC after: 1 week
2005-01-31 00:48:39 +00:00
sizeof(ipfw_dyn_rule), NULL, NULL, NULL, NULL,
UMA_ALIGN_PTR, 0);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_DYN_LOCK_INIT();
Replace references to NET_CALLOUT_MPSAFE with CALLOUT_MPSAFE, and remove definition of NET_CALLOUT_MPSAFE, which is no longer required now that debug.mpsafenet has been removed. The once over: bz Approved by: re (kensmith)
2007-07-28 07:31:30 +00:00
callout_init(&ipfw_timeout, CALLOUT_MPSAFE);
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
bzero(&default_rule, sizeof default_rule);
default_rule.act_ofs = 0;
default_rule.rulenum = IPFW_DEFAULT_RULE;
default_rule.cmd_len = 1;
Allow set 31 to be used for rules other than 65535. Set 31 is still special because rules belonging to it are not deleted by the "ipfw flush" command, but must be deleted explicitly with "ipfw delete set 31" or by individual rule numbers. This implement a flexible form of "persistent rules" which you might want to have available even after an "ipfw flush". Note that this change does not violate POLA, because you could not use set 31 in a ruleset before this change. sbin/ipfw changes to allow manipulation of set 31 will follow shortly. Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
default_rule.set = RESVD_SET;
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
default_rule.cmd[0].len = 1;
default_rule.cmd[0].opcode =
#ifdef IPFIREWALL_DEFAULT_TO_ACCEPT
1 ? O_ACCEPT :
#endif
O_DENY;
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
error = add_rule(&layer3_chain, &default_rule);
if (error != 0) {
printf("ipfw2: error %u initializing default rule "
"(support disabled)\n", error);
IPFW_DYN_LOCK_DESTROY();
IPFW_LOCK_DESTROY(&layer3_chain);
Destroy the dynamic rule zone in the event that we fail to insert the initial default rule. MFC after: 1 week
2006-01-20 03:21:25 +00:00
uma_zdestroy(ipfw_dyn_rule_zone);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
return (error);
}
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
ip_fw_default_rule = layer3_chain.rules;
Don't claim "(+ipv6)" if we didn't build with INET6.
2006-05-11 15:22:38 +00:00
printf("ipfw2 "
#ifdef INET6
"(+ipv6) "
#endif
"initialized, divert %s, "
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
"rule-based forwarding "
#ifdef IPFIREWALL_FORWARD
"enabled, "
#else
"disabled, "
#endif
"default to %s, logging ",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#ifdef IPDIVERT
"enabled",
#else
When printing the initialization string and IPDIVERT is not compiled into the kernel refer to it as "loadable" instead of "disabled".
2004-10-22 19:18:06 +00:00
"loadable",
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
#endif
default_rule.cmd[0].opcode == O_ACCEPT ? "accept" : "deny");
#ifdef IPFIREWALL_VERBOSE
fw_verbose = 1;
#endif
#ifdef IPFIREWALL_VERBOSE_LIMIT
verbose_limit = IPFIREWALL_VERBOSE_LIMIT;
#endif
if (fw_verbose == 0)
printf("disabled\n");
else if (verbose_limit == 0)
printf("unlimited\n");
else
printf("limited to %d packets/entry by default\n",
verbose_limit);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
- Change the return type for init_tables from void to int so we can propagate errors from rn_inithead back to the ipfw initialization function. - Check return value of rn_inithead for failure, if table allocation has failed for any reason, free up any tables we have created and return ENOMEM - In ipfw_init check the return value of init_tables and free up any mutexes or UMA zones which may have been created. - Assert that the supplied table is not NULL before attempting to dereference. This fixes panics which were a result of invalid memory accesses due to failed table allocation. This is an issue mainly because the R_Zalloc function is a malloc(M_NOWAIT) wrapper, thus making it possible for allocations to fail. Found by: Coverity Prevent (tm) Coverity ID: CID79 MFC after: 1 week
2006-01-20 05:35:27 +00:00
error = init_tables(&layer3_chain);
if (error) {
IPFW_DYN_LOCK_DESTROY();
IPFW_LOCK_DESTROY(&layer3_chain);
uma_zdestroy(ipfw_dyn_rule_zone);
return (error);
}
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
ip_fw_ctl_ptr = ipfw_ctl;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
ip_fw_chk_ptr = ipfw_chk;
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
callout_reset(&ipfw_timeout, hz, ipfw_tick, NULL);
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
LIST_INIT(&layer3_chain.nat);
ifaddr_event_tag = EVENTHANDLER_REGISTER(ifaddr_event, ifaddr_change,
NULL, EVENTHANDLER_PRI_ANY);
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
return (0);
}
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
void
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
ipfw_destroy(void)
{
struct ip_fw *reap;
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
struct cfg_nat *ptr, *ptr_temp;
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
ip_fw_chk_ptr = NULL;
ip_fw_ctl_ptr = NULL;
When unloading ipfw module use callout_drain() to make absolutely sure that all callouts are stopped and finished. Move it before IPFW_LOCK() to avoid deadlocking when draining callouts.
2004-08-19 23:31:40 +00:00
callout_drain(&ipfw_timeout);
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WLOCK(&layer3_chain);
Optimize parallel processing of ipfw(4) rulesets eliminating the locking of the radix lookup tables. Since several rnh_lookup() can run in parallel on the same table, we can piggyback on the shared locking provided by ipfw(4). However, the single entry cache in the ip_fw_table can't be used lockless, so it is removed. This pessimizes two cases: processing of bursts of similar packets and matching one packet against the same table several times during one ipfw_chk() lookup. To optimize the processing of similar packet bursts administrator should use stateful firewall. To optimize the second problem a solution will be provided soon. Details: o Since we piggyback on the ipfw(4) locking, and the latter is per-chain, the tables are moved from the global declaration to the struct ip_fw_chain. o The struct ip_fw_table is shrunk to one entry and thus vanished. o All table manipulating functions are extended to accept the struct ip_fw_chain * argument. o All table modifing functions use IPFW_WLOCK_ASSERT().
2005-12-06 10:45:49 +00:00
flush_tables(&layer3_chain);
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#ifdef IPFIREWALL_NAT
Summer of Code 2005: improve libalias - part 2 of 2 With the second (and last) part of my previous Summer of Code work, we get: -ipfw's in kernel nat -redirect_* and LSNAT support General information about nat syntax and some examples are available in the ipfw (8) man page. The redirect and LSNAT syntax are identical to natd, so please refer to natd (8) man page. To enable in kernel nat in rc.conf, two options were added: o firewall_nat_enable: equivalent to natd_enable o firewall_nat_interface: equivalent to natd_interface Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet to continue being checked by the firewall ruleset after being (de)aliased. NOTA BENE: due to some problems with libalias architecture, in kernel nat won't work with TSO enabled nic, thus you have to disable TSO via ifconfig (ifconfig foo0 -tso). Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
LIST_FOREACH_SAFE(ptr, &layer3_chain.nat, _next, ptr_temp) {
LIST_REMOVE(ptr, _next);
del_redir_spool_cfg(ptr, &ptr->redir_chain);
LibAliasUninit(ptr->lib);
free(ptr, M_IPFW);
}
EVENTHANDLER_DEREGISTER(ifaddr_event, ifaddr_event_tag);
Wrap ipfw nat support in a new kernel config option named "IPFIREWALL_NAT": this way nat is turned off by default and POLA is preserved. Reviewed by: rwatson
2007-01-03 11:12:54 +00:00
#endif
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
layer3_chain.reap = NULL;
free_chain(&layer3_chain, 1 /* kill default rule */);
reap = layer3_chain.reap, layer3_chain.reap = NULL;
This commit adds a shared locking mechanism very similar to the mechanism used by pfil. This shared locking mechanism will remove a nasty lock order reversal which occurs when ucred based rules are used which results in hard locks while mpsafenet=1. So this removes the debug.mpsafenet=0 requirement when using ucred based rules with IPFW. It should be noted that this locking mechanism does not guarantee fairness between read and write locks, and that it will favor firewall chain readers over writers. This seemed acceptable since write operations to firewall chains protected by this lock tend to be less frequent than reads. Reviewed by: andre, rwatson Tested by: myself, seanc Silence on: ipfw@ MFC after: 1 month
2004-12-10 02:17:18 +00:00
IPFW_WUNLOCK(&layer3_chain);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
if (reap != NULL)
reap_rules(reap);
IPFW_DYN_LOCK_DESTROY();
Change the state allocator from using regular malloc to using a UMA zone instead. This should eliminate a bit of the locking overhead associated with with malloc and reduce the memory consumption associated with each new state. Reviewed by: rwatson, andre Silence on: ipfw@ MFC after: 1 week
2005-01-31 00:48:39 +00:00
uma_zdestroy(ipfw_dyn_rule_zone);
o Fix bug I introduced in the previous commit (ipfw set extention): pack a set number correctly. Submitted by: oleg o Plug a memory leak. Submitted by: oleg and Andrey V. Elsukov Approved by: re (kensmith) MFC after: 1 week
2007-08-26 18:38:31 +00:00
if (ipfw_dyn_v != NULL)
free(ipfw_dyn_v, M_IPFW);
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
IPFW_LOCK_DESTROY(&layer3_chain);
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
Fix broken build of rev. 1.108 in case of no INET6 and IPFIREWALL compiled into kernel. Spotted and tested by: Michal Mertl <mime at traveller.cz>
2005-08-14 18:20:33 +00:00
#ifdef INET6
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
/* Free IPv6 fw sysctl tree. */
sysctl_ctx_free(&ip6_fw_sysctl_ctx);
Fix broken build of rev. 1.108 in case of no INET6 and IPFIREWALL compiled into kernel. Spotted and tested by: Michal Mertl <mime at traveller.cz>
2005-08-14 18:20:33 +00:00
#endif
* Add dynamic sysctl for net.inet6.ip6.fw. * Correct handling of IPv6 Extension Headers. * Add unreach6 code. * Add logging for IPv6. Submitted by: sysctl handling derived from patch from ume needed for ip6fw Obtained from: is_icmp6_query and send_reject6 derived from similar functions of netinet6,ip6fw Reviewed by: ume, gnn; silence on ipfw@ Test setup provided by: CK Software GmbH MFC after: 6 days
2005-08-13 11:02:34 +00:00
Add locking. o change timeout to MPSAFE callout o restructure rule deletion to deal with locking requirements o replace static buffer used for ipfw control operations with malloc'd storage Sponsored by: FreeBSD Foundation
2003-09-17 00:56:50 +00:00
printf("IP firewall unloaded\n");
The new ipfw code. This code makes use of variable-size kernel representation of rules (exactly the same concept of BPF instructions, as used in the BSDI's firewall), which makes firewall operation a lot faster, and the code more readable and easier to extend and debug. The interface with the rest of the system is unchanged, as witnessed by this commit. The only extra kernel files that I am touching are if_fw.h and ip_dummynet.c, which is quite tied to ipfw. In userland I only had to touch those programs which manipulate the internal representation of firewall rules). The code is almost entirely new (and I believe I have written the vast majority of those sections which were taken from the former ip_fw.c), so rather than modifying the old ip_fw.c I decided to create a new file, sys/netinet/ip_fw2.c . Same for the user interface, which is in sbin/ipfw/ipfw2.c (it still compiles to /sbin/ipfw). The old files are still there, and will be removed in due time. I have not renamed the header file because it would have required touching a one-line change to a number of kernel files. In terms of user interface, the new "ipfw" is supposed to accepts the old syntax for ipfw rules (and produce the same output with "ipfw show". Only a couple of the old options (out of some 30 of them) has not been implemented, but they will be soon. On the other hand, the new code has some very powerful extensions. First, you can put "or" connectives between match fields (and soon also between options), and write things like ipfw add allow ip from { 1.2.3.4/27 or 5.6.7.8/30 } 10-23,25,1024-3000 to any This should make rulesets slightly more compact (and lines longer!), by condensing 2 or more of the old rules into single ones. Also, as an example of how easy the rules can be extended, I have implemented an 'address set' match pattern, where you can specify an IP address in a format like this: 10.20.30.0/26{18,44,33,22,9} which will match the set of hosts listed in braces belonging to the subnet 10.20.30.0/26 . The match is done using a bitmap, so it is essentially a constant time operation requiring a handful of CPU instructions (and a very small amount of memmory -- for a full /24 subnet, the instruction only consumes 40 bytes). Again, in this commit I have focused on functionality and tried to minimize changes to the other parts of the system. Some performance improvement can be achieved with minor changes to the interface of ip_fw_chk_t. This will be done later when this code is settled. The code is meant to compile unmodified on RELENG_4 (once the PACKET_TAG_* changes have been merged), for this reason you will see #ifdef __FreeBSD_version in a couple of places. This should minimize errors when (hopefully soon) it will be time to do the MFC.
2002-06-27 23:02:18 +00:00
}
Reference in New Issue Copy Permalink