freebsd-skq/sys/pccard/cardinfo.h

/*
 *	Include file for PCMCIA user process interface
 *
 *-------------------------------------------------------------------------
 */
/*-
 * Copyright (c) 1995 Andrew McRae.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/* $FreeBSD$ */

#ifndef	_PCCARD_CARDINFO_H_
#define	_PCCARD_CARDINFO_H_

#ifndef _KERNEL
#include <sys/types.h>
#endif
#include <sys/ioccom.h>

#define	PIOCGSTATE	_IOR('P', 1, struct slotstate)	/* Get slot state */
#define	PIOCGMEM	_IOWR('P', 2, struct mem_desc)	/* Get memory map */
#define	PIOCSMEM	_IOW('P', 3, struct mem_desc)	/* Set memory map */
#define	PIOCGIO		_IOWR('P', 4, struct io_desc)	/* Get I/O map */
#define	PIOCSIO		_IOW('P', 5, struct io_desc)	/* Set I/O map */
#define PIOCSDRV	_IOWR('P', 6, struct dev_desc)	/* Set driver */
#define PIOCRWFLAG	_IOW('P', 7, int)	/* Set flags for drv use */
#define PIOCRWMEM	_IOWR('P', 8, unsigned long) /* Set mem for drv use */
#define PIOCSPOW	_IOW('P', 9, struct power) /* Set power structure */
#define PIOCSVIR	_IOW('P', 10, int)	/* Virtual insert/remove */
#define PIOCSBEEP	_IOW('P', 11, int)		/* Select Beep */
#define PIOCSRESOURCE	_IOWR('P', 12, struct pccard_resource)	/* get resource info */
/*
 *	Debug codes.
 */
#define PIOCGREG	_IOWR('P',100, struct pcic_reg)	/* get reg */
#define PIOCSREG	_IOW('P', 101, struct pcic_reg)	/* Set reg */

/*
 *	Slot states for PIOCGSTATE
 *
 *	Here's a state diagram of all the possible states:
 *
 *                             power x 1
 *                       -------------------
 *                      /                   \
 *                     /                     v
 *    resume    +----------+   power x 0   +----------+
 *      ------->| inactive |<--------------| filled   |
 *     /        +----------+               +----------+
 *    /           /     \                   ^   |
 *  nil <---------       \        insert or |   | suspend or
 *        suspend         \       power x 1 |   | eject
 *                         \                |   v
 *                          \            +----------+
 *                           ----------->|  empty   |
 *                             eject     +----------+
 *
 *	Note, the above diagram is for the state.  On suspend, the laststate
 * gets set to suspend to tell pccardd what happened.  Also the nil state
 * means that when the no state change has happened.  Note: if you eject
 * while suspended in the inactive state, you will return to the
 * empty state if you do not insert a new card and to the inactive state
 * if you do insert a new card.
 *
 * Some might argue that inactive should be sticky forever and
 * eject/insert shouldn't take it out of that state.  They might be
 * right.  On the other hand, some would argue that eject resets all
 * state.  They might be right.  They both can't be right.  The above
 * represents a reasonable compromise between the two.
 *
 * Some bridges allow one to query to see if the card was changed while
 * we were suspended.  Others do not.  We make no use of this functionality
 * at this time.
 */
enum cardstate { noslot, empty, suspend, filled, inactive };

/*
 *	Descriptor structure for memory map.
 */
struct mem_desc {
	int	window;		/* Memory map window number (0-4) */
	int	flags;		/* Flags - see below */
	caddr_t	start;		/* System memory start */
	int	size;		/* Size of memory area */
	unsigned long card;	/* Card memory address */
};

#define	MDF_16BITS	0x01	/* Memory is 16 bits wide */
#define	MDF_ZEROWS	0x02	/* Set no wait states for memory */
#define	MDF_WS0		0x04	/* Wait state flags */
#define	MDF_WS1		0x08
#define	MDF_ATTR	0x10	/* Memory is attribute memory */
#define	MDF_WP		0x20	/* Write protect memory */
#define	MDF_ACTIVE	0x40	/* Context active (read-only) */

/*
 *	Descriptor structure for I/O map
 */
struct io_desc {
	int	window;		/* I/O map number (0-1) */
	int	flags;		/* Flags - see below */
	int	start;		/* I/O port start */
	int	size;		/* Number of port addresses */
};

#define	IODF_WS		0x01	/* Set wait states for 16 bit I/O access */
#define	IODF_16BIT	0x02	/* I/O access are 16 bit */
#define	IODF_CS16	0x04	/* Allow card selection of 16 bit access */
#define	IODF_ZEROWS	0x08	/* No wait states for 8 bit I/O */
#define	IODF_ACTIVE	0x10	/* Context active (read-only) */

/*
 *	Device descriptor for allocation of driver.
 */
#define DEV_MISC_LEN	36
#define DEV_MAX_CIS_LEN	40
struct dev_desc {
	char		name[16];	/* Driver name */
	int		unit;		/* Driver unit number */
	unsigned long	mem;		/* Memory address of driver */
	int		memsize;	/* Memory size (if used) */
	int		iobase;		/* base of I/O ports */
	int		iosize;		/* Length of I/O ports */
	int		irqmask;	/* Interrupt number(s) to allocate */
	int		flags;		/* Device flags */
	uint8_t		misc[DEV_MISC_LEN]; /* For any random info */
	uint8_t		manufstr[DEV_MAX_CIS_LEN];
	uint8_t		versstr[DEV_MAX_CIS_LEN];
	uint8_t		cis3str[DEV_MAX_CIS_LEN];
	uint8_t		cis4str[DEV_MAX_CIS_LEN];
	uint32_t	manufacturer;	/* Manufacturer ID */
	uint32_t	product;	/* Product ID */
	uint32_t	prodext;	/* Product ID (extended) */
};
#define DEV_DESC_HAS_SIZE 1

struct pcic_reg {
	unsigned char reg;
	unsigned char value;
};

/*
 *	Slot information. Used to read current status of slot.
 */
struct slotstate {
	enum cardstate	state;		/* Current state of slot */
	enum cardstate	laststate;	/* Previous state of slot */
	int		maxmem;		/* Max allowed memory windows */
	int		maxio;		/* Max allowed I/O windows */
	int		irqs;		/* Bitmap of IRQs allowed */
	int		flags;		/* Capability flags */
};

/*
 *	The power values are in volts * 10, e.g. 5V is 50, 3.3V is 33.
 */
struct power {
	int		vcc;
	int		vpp;
};

/*
 *	The PC-Card resource IOC_GET_RESOURCE_RANGE
 */
struct pccard_resource {
	int		type;
	u_long		size;
	u_long		min;
	u_long		max;
	u_long		resource_addr;
};


/*
 *	Other system limits
 */
#define MAXSLOT 16
#define	NUM_MEM_WINDOWS	10
#define	NUM_IO_WINDOWS	6
#define	CARD_DEVICE	"/dev/card%d"		/* String for snprintf */
#define	PCCARD_MEMSIZE	(4*1024)

#endif /* !_PCCARD_CARDINFO_H_ */