freebsd-skq/sys/dev/usb2/include/usb2_cdc.h

206 lines
6.5 KiB
C
Raw Normal View History

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* $NetBSD: usbcdc.h,v 1.9 2004/10/23 13:24:24 augustss Exp $ */
/* $FreeBSD$ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _USB_CDC_H_
#define _USB_CDC_H_
#define UDESCSUB_CDC_HEADER 0
#define UDESCSUB_CDC_CM 1 /* Call Management */
#define UDESCSUB_CDC_ACM 2 /* Abstract Control Model */
#define UDESCSUB_CDC_DLM 3 /* Direct Line Management */
#define UDESCSUB_CDC_TRF 4 /* Telephone Ringer */
#define UDESCSUB_CDC_TCLSR 5 /* Telephone Call */
#define UDESCSUB_CDC_UNION 6
#define UDESCSUB_CDC_CS 7 /* Country Selection */
#define UDESCSUB_CDC_TOM 8 /* Telephone Operational Modes */
#define UDESCSUB_CDC_USBT 9 /* USB Terminal */
#define UDESCSUB_CDC_NCT 10
#define UDESCSUB_CDC_PUF 11
#define UDESCSUB_CDC_EUF 12
#define UDESCSUB_CDC_MCMF 13
#define UDESCSUB_CDC_CCMF 14
#define UDESCSUB_CDC_ENF 15
#define UDESCSUB_CDC_ANF 16
struct usb2_cdc_header_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDescriptorSubtype;
uWord bcdCDC;
} __packed;
struct usb2_cdc_cm_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDescriptorSubtype;
uByte bmCapabilities;
#define USB_CDC_CM_DOES_CM 0x01
#define USB_CDC_CM_OVER_DATA 0x02
uByte bDataInterface;
} __packed;
struct usb2_cdc_acm_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDescriptorSubtype;
uByte bmCapabilities;
#define USB_CDC_ACM_HAS_FEATURE 0x01
#define USB_CDC_ACM_HAS_LINE 0x02
#define USB_CDC_ACM_HAS_BREAK 0x04
#define USB_CDC_ACM_HAS_NETWORK_CONN 0x08
} __packed;
struct usb2_cdc_union_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDescriptorSubtype;
uByte bMasterInterface;
uByte bSlaveInterface[1];
} __packed;
struct usb2_cdc_ethernet_descriptor {
uByte bLength;
uByte bDescriptorType;
uByte bDescriptorSubtype;
uByte iMacAddress;
uDWord bmEthernetStatistics;
uWord wMaxSegmentSize;
uWord wNumberMCFilters;
uByte bNumberPowerFilters;
} __packed;
#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
#define UCDC_GET_ENCAPSULATED_RESPONSE 0x01
#define UCDC_SET_COMM_FEATURE 0x02
#define UCDC_GET_COMM_FEATURE 0x03
#define UCDC_ABSTRACT_STATE 0x01
#define UCDC_COUNTRY_SETTING 0x02
#define UCDC_CLEAR_COMM_FEATURE 0x04
#define UCDC_SET_LINE_CODING 0x20
#define UCDC_GET_LINE_CODING 0x21
#define UCDC_SET_CONTROL_LINE_STATE 0x22
#define UCDC_LINE_DTR 0x0001
#define UCDC_LINE_RTS 0x0002
#define UCDC_SEND_BREAK 0x23
#define UCDC_BREAK_ON 0xffff
#define UCDC_BREAK_OFF 0x0000
struct usb2_cdc_abstract_state {
uWord wState;
#define UCDC_IDLE_SETTING 0x0001
#define UCDC_DATA_MULTIPLEXED 0x0002
} __packed;
#define UCDC_ABSTRACT_STATE_LENGTH 2
struct usb2_cdc_line_state {
uDWord dwDTERate;
uByte bCharFormat;
#define UCDC_STOP_BIT_1 0
#define UCDC_STOP_BIT_1_5 1
#define UCDC_STOP_BIT_2 2
uByte bParityType;
#define UCDC_PARITY_NONE 0
#define UCDC_PARITY_ODD 1
#define UCDC_PARITY_EVEN 2
#define UCDC_PARITY_MARK 3
#define UCDC_PARITY_SPACE 4
uByte bDataBits;
} __packed;
#define UCDC_LINE_STATE_LENGTH 7
struct usb2_cdc_notification {
uByte bmRequestType;
#define UCDC_NOTIFICATION 0xa1
uByte bNotification;
#define UCDC_N_NETWORK_CONNECTION 0x00
#define UCDC_N_RESPONSE_AVAILABLE 0x01
#define UCDC_N_AUX_JACK_HOOK_STATE 0x08
#define UCDC_N_RING_DETECT 0x09
#define UCDC_N_SERIAL_STATE 0x20
#define UCDC_N_CALL_STATE_CHANGED 0x28
#define UCDC_N_LINE_STATE_CHANGED 0x29
#define UCDC_N_CONNECTION_SPEED_CHANGE 0x2a
uWord wValue;
uWord wIndex;
uWord wLength;
uByte data[16];
} __packed;
#define UCDC_NOTIFICATION_LENGTH 8
/*
* Bits set in the SERIAL STATE notifcation (first byte of data)
*/
#define UCDC_N_SERIAL_OVERRUN 0x40
#define UCDC_N_SERIAL_PARITY 0x20
#define UCDC_N_SERIAL_FRAMING 0x10
#define UCDC_N_SERIAL_RI 0x08
#define UCDC_N_SERIAL_BREAK 0x04
#define UCDC_N_SERIAL_DSR 0x02
#define UCDC_N_SERIAL_DCD 0x01
/* Serial state bit masks */
#define UCDC_MDM_RXCARRIER 0x01
#define UCDC_MDM_TXCARRIER 0x02
#define UCDC_MDM_BREAK 0x04
#define UCDC_MDM_RING 0x08
#define UCDC_MDM_FRAMING_ERR 0x10
#define UCDC_MDM_PARITY_ERR 0x20
#define UCDC_MDM_OVERRUN_ERR 0x40
/* 512x4 Multi Frame Ethernet Header */
struct usb2_cdc_mf_eth_512x4_header {
uByte bSig[2]; /* "FL" - Frag List */
uByte bReserved[4];
uWord wFragLength[511 * 4];
#define CDCE_512X4_FRAG_LENGTH_OFFSET 6 /* bytes */
#define CDCE_512X4_FRAG_LAST_MASK 0x8000
#define CDCE_512X4_FRAG_LENGTH_MASK 0x1FFF /* bytes */
#define CDCE_512X4_FRAME_FRAG_MAX 4 /* fragments */
#define CDCE_512X4_FRAMES_MAX 511 /* frames */
#define CDCE_512X4_FRAGS_MAX (511 * 4) /* fragments */
uWord wPadding; /* used to make transfer short */
} __packed;
#endif /* _USB_CDC_H_ */