freebsd-skq/sys/mips/conf/CARAMBOLA2

#
# Carambola 2 - an AR933x based SoC wifi device.
#
# http://shop.8devices.com/wifi4things/carambola2
#
# * AR9330 SoC
# * 64MB RAM
# * 16MB flash
# * Integrated 1x1 2GHz wifi and 10/100 bridge
#
# $FreeBSD$
#

#NO_UNIVERSE

# Include the default AR933x parameters
include         "AR933X_BASE"

ident           CARAMBOLA2

# Override hints with board values
hints           "CARAMBOLA2.hints"

# Board memory - 64MB
options         AR71XX_REALMEM=(64*1024*1024)

# i2c GPIO bus
#device		gpioiic
#device		iicbb
#device		iicbus
#device		iic

# Options required for miiproxy and mdiobus
options 	ARGE_MDIO	# Export an MDIO bus separate from arge
device		miiproxy	# MDIO bus <-> MII PHY rendezvous

device		etherswitch
device		arswitch

# read MSDOS formatted disks - USB
#options 	MSDOSFS

# Enable the uboot environment stuff rather then the
# redboot stuff.
options 	AR71XX_ENV_UBOOT

# uzip - to boot natively from flash
device		geom_uncompress
options 	GEOM_UNCOMPRESS

# Used for the static uboot partition map
device          geom_map

# Boot off of the rootfs, as defined in the geom_map setup.
options 	ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
Add 8devices CARAMBOLA2 support. This is based on the AR933x (Hornet) SoC from Qualcomm Atheros. It's a much nicer board to do development on - 64MB RAM, 16MB flash. The development board breaks out the GPIO pins, ethernet, serial (via a USB<->RS232 chip), USB host and of course a small wifi antenna. Everything but the wifi works thus far. 2013-06-08 20:21:17 +00:00			`#`
			`# Carambola 2 - an AR933x based SoC wifi device.`
			`#`
			`# http://shop.8devices.com/wifi4things/carambola2`
			`#`
			`# * AR9330 SoC`
			`# * 64MB RAM`
			`# * 16MB flash`
			`# * Integrated 1x1 2GHz wifi and 10/100 bridge`
			`#`
			`# $FreeBSD$`
			`#`

Mark the mostly redundant kernels that just pull in something from _BASE as NO_UNIVERSE Differential Revision: https://reviews.freebsd.org/D4200 2015-11-19 01:58:12 +00:00			`#NO_UNIVERSE`

Add 8devices CARAMBOLA2 support. This is based on the AR933x (Hornet) SoC from Qualcomm Atheros. It's a much nicer board to do development on - 64MB RAM, 16MB flash. The development board breaks out the GPIO pins, ethernet, serial (via a USB<->RS232 chip), USB host and of course a small wifi antenna. Everything but the wifi works thus far. 2013-06-08 20:21:17 +00:00			`# Include the default AR933x parameters`
			`include "AR933X_BASE"`

			`ident CARAMBOLA2`

			`# Override hints with board values`
			`hints "CARAMBOLA2.hints"`

			`# Board memory - 64MB`
			`options AR71XX_REALMEM=(6410241024)`

			`# i2c GPIO bus`
			`#device gpioiic`
			`#device iicbb`
			`#device iicbus`
			`#device iic`

			`# Options required for miiproxy and mdiobus`
			`options ARGE_MDIO # Export an MDIO bus separate from arge`
			`device miiproxy # MDIO bus <-> MII PHY rendezvous`

			`device etherswitch`
			`device arswitch`

			`# read MSDOS formatted disks - USB`
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`#options MSDOSFS`
Add 8devices CARAMBOLA2 support. This is based on the AR933x (Hornet) SoC from Qualcomm Atheros. It's a much nicer board to do development on - 64MB RAM, 16MB flash. The development board breaks out the GPIO pins, ethernet, serial (via a USB<->RS232 chip), USB host and of course a small wifi antenna. Everything but the wifi works thus far. 2013-06-08 20:21:17 +00:00
			`# Enable the uboot environment stuff rather then the`
			`# redboot stuff.`
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`options AR71XX_ENV_UBOOT`
Add 8devices CARAMBOLA2 support. This is based on the AR933x (Hornet) SoC from Qualcomm Atheros. It's a much nicer board to do development on - 64MB RAM, 16MB flash. The development board breaks out the GPIO pins, ethernet, serial (via a USB<->RS232 chip), USB host and of course a small wifi antenna. Everything but the wifi works thus far. 2013-06-08 20:21:17 +00:00
			`# uzip - to boot natively from flash`
			`device geom_uncompress`
			`options GEOM_UNCOMPRESS`

			`# Used for the static uboot partition map`
			`device geom_map`

			`# Boot off of the rootfs, as defined in the geom_map setup.`
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"`