2000-07-04 16:35:15 +00:00
|
|
|
/* $FreeBSD$ */
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
/* $KAME: keydb.h,v 1.24 2003/09/07 15:12:10 itojun Exp $ */
|
2000-07-04 16:35:15 +00:00
|
|
|
|
1999-11-22 02:45:11 +00:00
|
|
|
/*
|
|
|
|
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. Neither the name of the project nor the names of its contributors
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _NETKEY_KEYDB_H_
|
2000-07-04 16:35:15 +00:00
|
|
|
#define _NETKEY_KEYDB_H_
|
1999-11-22 02:45:11 +00:00
|
|
|
|
1999-12-29 04:46:21 +00:00
|
|
|
#ifdef _KERNEL
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
#include <netkey/key_var.h>
|
|
|
|
|
2004-11-08 18:49:51 +00:00
|
|
|
#ifndef _SOCKADDR_UNION_DEFINED
|
|
|
|
#define _SOCKADDR_UNION_DEFINED
|
|
|
|
/*
|
|
|
|
* The union of all possible address formats we handle.
|
|
|
|
*/
|
|
|
|
union sockaddr_union {
|
|
|
|
struct sockaddr sa;
|
|
|
|
struct sockaddr_in sin;
|
|
|
|
struct sockaddr_in6 sin6;
|
|
|
|
};
|
|
|
|
#endif /* _SOCKADDR_UNION_DEFINED */
|
|
|
|
|
1999-11-22 02:45:11 +00:00
|
|
|
/* Security Assocciation Index */
|
2000-07-04 16:35:15 +00:00
|
|
|
/* NOTE: Ensure to be same address family */
|
1999-11-22 02:45:11 +00:00
|
|
|
struct secasindex {
|
2000-07-04 16:35:15 +00:00
|
|
|
struct sockaddr_storage src; /* srouce address for SA */
|
|
|
|
struct sockaddr_storage dst; /* destination address for SA */
|
|
|
|
u_int16_t proto; /* IPPROTO_ESP or IPPROTO_AH */
|
|
|
|
u_int8_t mode; /* mode of protocol, see ipsec.h */
|
|
|
|
u_int32_t reqid; /* reqid id who owned this SA */
|
|
|
|
/* see IPSEC_MANUAL_REQID_MAX. */
|
1999-11-22 02:45:11 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Security Association Data Base */
|
|
|
|
struct secashead {
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_ENTRY(secashead) chain;
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
struct secasindex saidx;
|
|
|
|
|
|
|
|
struct sadb_ident *idents; /* source identity */
|
|
|
|
struct sadb_ident *identd; /* destination identity */
|
|
|
|
/* XXX I don't know how to use them. */
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
u_int8_t state; /* MATURE or DEAD. */
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_HEAD(_satree, secasvar) savtree[SADB_SASTATE_MAX+1];
|
1999-11-22 02:45:11 +00:00
|
|
|
/* SA chain */
|
|
|
|
/* The first of this list is newer SA */
|
|
|
|
|
2003-01-08 17:59:24 +00:00
|
|
|
union {
|
|
|
|
struct route sau_route;
|
|
|
|
struct route_in6 sau_route6;
|
|
|
|
} sa_u;
|
|
|
|
#define sa_route sa_u.sau_route
|
1999-11-22 02:45:11 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Security Association */
|
|
|
|
struct secasvar {
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
TAILQ_ENTRY(secasvar) tailq;
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_ENTRY(secasvar) chain;
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
LIST_ENTRY(secasvar) spihash;
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
int refcnt; /* reference count */
|
|
|
|
u_int8_t state; /* Status of this Association */
|
|
|
|
|
|
|
|
u_int8_t alg_auth; /* Authentication Algorithm Identifier*/
|
|
|
|
u_int8_t alg_enc; /* Cipher Algorithm Identifier */
|
|
|
|
u_int32_t spi; /* SPI Value, network byte order */
|
|
|
|
u_int32_t flags; /* holder for SADB_KEY_FLAGS */
|
|
|
|
|
|
|
|
struct sadb_key *key_auth; /* Key for Authentication */
|
|
|
|
struct sadb_key *key_enc; /* Key for Encryption */
|
|
|
|
caddr_t iv; /* Initilization Vector */
|
|
|
|
u_int ivlen; /* length of IV */
|
2001-06-11 12:39:29 +00:00
|
|
|
void *sched; /* intermediate encryption key */
|
|
|
|
size_t schedlen;
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
struct secreplay *replay; /* replay prevention */
|
2001-06-11 12:39:29 +00:00
|
|
|
long created; /* for lifetime */
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
struct sadb_lifetime *lft_c; /* CURRENT lifetime, it's constant. */
|
|
|
|
struct sadb_lifetime *lft_h; /* HARD lifetime */
|
|
|
|
struct sadb_lifetime *lft_s; /* SOFT lifetime */
|
1999-11-22 02:45:11 +00:00
|
|
|
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
u_int64_t seq; /* sequence number */
|
2000-07-04 16:35:15 +00:00
|
|
|
pid_t pid; /* message's pid */
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
struct secashead *sah; /* back pointer to the secashead */
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
|
|
|
|
u_int32_t id; /* SA id */
|
1999-11-22 02:45:11 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* replay prevention */
|
|
|
|
struct secreplay {
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
u_int64_t count;
|
2000-07-04 16:35:15 +00:00
|
|
|
u_int wsize; /* window size, i.g. 4 bytes */
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
u_int64_t seq; /* used by sender */
|
|
|
|
u_int64_t lastseq; /* used by receiver */
|
|
|
|
u_int8_t *bitmap; /* used by receiver */
|
|
|
|
int overflow; /* what round does the counter take. */
|
1999-11-22 02:45:11 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* socket table due to send PF_KEY messages. */
|
|
|
|
struct secreg {
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_ENTRY(secreg) chain;
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
struct socket *so;
|
1999-11-22 02:45:11 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
#ifndef IPSEC_NONBLOCK_ACQUIRE
|
|
|
|
/* acquiring list table. */
|
|
|
|
struct secacq {
|
2000-05-26 02:09:24 +00:00
|
|
|
LIST_ENTRY(secacq) chain;
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
struct secasindex saidx;
|
1999-11-22 02:45:11 +00:00
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
u_int32_t seq; /* sequence number */
|
2001-06-11 12:39:29 +00:00
|
|
|
long created; /* for lifetime */
|
2000-07-04 16:35:15 +00:00
|
|
|
int count; /* for lifetime */
|
1999-11-22 02:45:11 +00:00
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Sensitivity Level Specification */
|
|
|
|
/* nothing */
|
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
#define SADB_KILL_INTERVAL 600 /* six seconds */
|
1999-11-22 02:45:11 +00:00
|
|
|
|
|
|
|
struct key_cb {
|
|
|
|
int key_count;
|
|
|
|
int any_count;
|
|
|
|
};
|
|
|
|
|
2000-07-04 16:35:15 +00:00
|
|
|
/* secpolicy */
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
struct secpolicy;
|
|
|
|
struct secpolicyindex;
|
2002-03-20 02:39:27 +00:00
|
|
|
extern struct secpolicy *keydb_newsecpolicy(void);
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
extern u_int32_t keydb_newspid(void);
|
2002-03-20 02:39:27 +00:00
|
|
|
extern void keydb_delsecpolicy(struct secpolicy *);
|
- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
2003-11-04 16:02:05 +00:00
|
|
|
extern int keydb_setsecpolicyindex
|
|
|
|
(struct secpolicy *, struct secpolicyindex *);
|
2000-07-04 16:35:15 +00:00
|
|
|
/* secashead */
|
2002-03-20 02:39:27 +00:00
|
|
|
extern struct secashead *keydb_newsecashead(void);
|
|
|
|
extern void keydb_delsecashead(struct secashead *);
|
2000-07-04 16:35:15 +00:00
|
|
|
/* secasvar */
|
2002-03-20 02:39:27 +00:00
|
|
|
extern struct secasvar *keydb_newsecasvar(void);
|
2003-11-02 10:49:47 +00:00
|
|
|
extern void keydb_delsecasvar(struct secasvar *);
|
2000-07-04 16:35:15 +00:00
|
|
|
/* secreplay */
|
2002-03-20 02:39:27 +00:00
|
|
|
extern struct secreplay *keydb_newsecreplay(size_t);
|
|
|
|
extern void keydb_delsecreplay(struct secreplay *);
|
2000-07-04 16:35:15 +00:00
|
|
|
/* secreg */
|
2002-03-20 02:39:27 +00:00
|
|
|
extern struct secreg *keydb_newsecreg(void);
|
|
|
|
extern void keydb_delsecreg(struct secreg *);
|
2000-07-04 16:35:15 +00:00
|
|
|
|
1999-12-29 04:46:21 +00:00
|
|
|
#endif /* _KERNEL */
|
1999-11-22 02:45:11 +00:00
|
|
|
|
|
|
|
#endif /* _NETKEY_KEYDB_H_ */
|