freebsd-skq/sys/conf/options.powerpc

# $FreeBSD$
# Options specific to the powerpc platform kernels

AIM			opt_global.h
E500			opt_global.h

POWERPC
POWERPC64

FPU_EMU

COMPAT_FREEBSD32	opt_compat.h

GFB_DEBUG		opt_gfb.h
GFB_NO_FONT_LOADING	opt_gfb.h
GFB_NO_MODE_CHANGE	opt_gfb.h

MPC85XX			opt_platform.h
POWERMAC		opt_platform.h
MAMBO
PSIM

SC_OFWFB		opt_ofwfb.h

OFWCONS_POLL_HZ		opt_ofw.h

# AGP debugging support
AGP_DEBUG		opt_agp.h
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien 2001-06-17 09:39:44 +00:00			`# $FreeBSD$`
Add a cosmetic comment. 2001-08-02 23:54:23 +00:00			`# Options specific to the powerpc platform kernels`
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien 2001-06-17 09:39:44 +00:00
Rename OEA to AIM. The former means nothing as it applies to all processors (it's the PowerPC Operating Environment Architecture). AIM designates the processors made by the Apple-IBM-Motorola alliance and those we typically support. While here, remove the NetBSD option IPKDB. It's not an option used by us. Also, PPC_HAVE_FPU is not used by us either. Remove that too. Obtained from: Juniper, Semihalf 2007-12-16 00:45:56 +00:00			`AIM opt_global.h`
Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family. The PQ3 is a high performance integrated communications processing system based on the e500 core, which is an embedded RISC processor that implements the 32-bit Book E definition of the PowerPC architecture. For details refer to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E This port was tested and successfully run on the following members of the PQ3 family: MPC8533, MPC8541, MPC8548, MPC8555. The following major integrated peripherals are supported: * On-chip peripherals bus * OpenPIC interrupt controller * UART * Ethernet (TSEC) * Host/PCI bridge * QUICC engine (SCC functionality) This commit brings the main functionality and will be followed by individual drivers that are logically separate from this base. Approved by: cognet (mentor) Obtained from: Juniper, Semihalf MFp4: e500 2008-03-03 17:17:00 +00:00			`E500 opt_global.h`
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien 2001-06-17 09:39:44 +00:00
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture. 2010-07-13 05:32:19 +00:00			`POWERPC`
			`POWERPC64`

Hook-up the FPU emulator. It's optional upon FPU_EMU. 2008-02-23 20:16:38 +00:00			`FPU_EMU`

MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture. 2010-07-13 05:32:19 +00:00			`COMPAT_FREEBSD32 opt_compat.h`

Add required GFB options as well as one for ofw/syscons. 2004-01-21 05:20:58 +00:00			`GFB_DEBUG opt_gfb.h`
			`GFB_NO_FONT_LOADING opt_gfb.h`
			`GFB_NO_MODE_CHANGE opt_gfb.h`

Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family. The PQ3 is a high performance integrated communications processing system based on the e500 core, which is an embedded RISC processor that implements the 32-bit Book E definition of the PowerPC architecture. For details refer to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E This port was tested and successfully run on the following members of the PQ3 family: MPC8533, MPC8541, MPC8548, MPC8555. The following major integrated peripherals are supported: * On-chip peripherals bus * OpenPIC interrupt controller * UART * Ethernet (TSEC) * Host/PCI bridge * QUICC engine (SCC functionality) This commit brings the main functionality and will be followed by individual drivers that are logically separate from this base. Approved by: cognet (mentor) Obtained from: Juniper, Semihalf MFp4: e500 2008-03-03 17:17:00 +00:00			`MPC85XX opt_platform.h`
Sort platform options. 2010-07-11 21:12:42 +00:00			`POWERMAC opt_platform.h`
Add support for the IBM Full-System Simulator (Mambo). This code has been developed against the 970 and Cell simulators. 2010-07-31 13:22:34 +00:00			`MAMBO`
Options that go into homonymous headers shouldn't specify the header name. Submitted by: Hiten Pandya <hiten@unixdaemons.com> 2003-04-12 09:40:37 +00:00			`PSIM`
Add required GFB options as well as one for ofw/syscons. 2004-01-21 05:20:58 +00:00
			`SC_OFWFB opt_ofwfb.h`
Catch up with sparc64 OFWCONS_POLL_HZ change 2004-06-25 13:44:34 +00:00
			`OFWCONS_POLL_HZ opt_ofw.h`
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus. 2010-10-31 18:27:05 +00:00
			`# AGP debugging support`
			`AGP_DEBUG opt_agp.h`