freebsd-skq/sys/dev/ste/if_ste.c

2133 lines
57 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
2003-04-03 21:36:33 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_device_polling.h"
#endif
#include <sys/param.h>
#include <sys/systm.h>
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kernel.h>
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
2004-05-30 20:00:41 +00:00
#include <sys/module.h>
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
#include <sys/rman.h>
#include <sys/socket.h>
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
#include <sys/sockio.h>
#include <sys/sysctl.h>
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
#include <net/if_vlan_var.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/mii/mii.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
#include <dev/ste/if_stereg.h>
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
MODULE_DEPEND(ste, pci, 1, 1, 1);
MODULE_DEPEND(ste, ether, 1, 1, 1);
MODULE_DEPEND(ste, miibus, 1, 1, 1);
/* Define to show Tx error status. */
#define STE_SHOW_TXERRORS
/*
* Various supported device vendors/types and their names.
*/
static const struct ste_type ste_devs[] = {
2007-03-10 03:10:34 +00:00
{ ST_VENDORID, ST_DEVICEID_ST201_1, "Sundance ST201 10/100BaseTX" },
{ ST_VENDORID, ST_DEVICEID_ST201_2, "Sundance ST201 10/100BaseTX" },
{ DL_VENDORID, DL_DEVICEID_DL10050, "D-Link DL10050 10/100BaseTX" },
{ 0, 0, NULL }
};
2009-12-21 20:42:23 +00:00
static int ste_attach(device_t);
static int ste_detach(device_t);
static int ste_probe(device_t);
static int ste_resume(device_t);
2009-12-21 20:42:23 +00:00
static int ste_shutdown(device_t);
static int ste_suspend(device_t);
2009-12-21 20:42:23 +00:00
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
static int ste_dma_alloc(struct ste_softc *);
static void ste_dma_free(struct ste_softc *);
static void ste_dmamap_cb(void *, bus_dma_segment_t *, int, int);
2009-12-21 20:42:23 +00:00
static int ste_eeprom_wait(struct ste_softc *);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
static int ste_encap(struct ste_softc *, struct mbuf **,
struct ste_chain *);
2009-12-21 20:42:23 +00:00
static int ste_ifmedia_upd(struct ifnet *);
static void ste_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static void ste_init(void *);
static void ste_init_locked(struct ste_softc *);
static int ste_init_rx_list(struct ste_softc *);
static void ste_init_tx_list(struct ste_softc *);
static void ste_intr(void *);
static int ste_ioctl(struct ifnet *, u_long, caddr_t);
static uint32_t ste_mii_bitbang_read(device_t);
static void ste_mii_bitbang_write(device_t, uint32_t);
2009-12-21 20:42:23 +00:00
static int ste_miibus_readreg(device_t, int, int);
static void ste_miibus_statchg(device_t);
static int ste_miibus_writereg(device_t, int, int, int);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
static int ste_newbuf(struct ste_softc *, struct ste_chain_onefrag *);
static int ste_read_eeprom(struct ste_softc *, uint16_t *, int, int);
2009-12-21 20:42:23 +00:00
static void ste_reset(struct ste_softc *);
static void ste_restart_tx(struct ste_softc *);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
static int ste_rxeof(struct ste_softc *, int);
static void ste_rxfilter(struct ste_softc *);
static void ste_setwol(struct ste_softc *);
2009-12-21 20:42:23 +00:00
static void ste_start(struct ifnet *);
static void ste_start_locked(struct ifnet *);
static void ste_stats_clear(struct ste_softc *);
static void ste_stats_update(struct ste_softc *);
2009-12-21 20:42:23 +00:00
static void ste_stop(struct ste_softc *);
static void ste_sysctl_node(struct ste_softc *);
static void ste_tick(void *);
2009-12-21 20:42:23 +00:00
static void ste_txeoc(struct ste_softc *);
static void ste_txeof(struct ste_softc *);
static void ste_wait(struct ste_softc *);
static void ste_watchdog(struct ste_softc *);
/*
* MII bit-bang glue
*/
static const struct mii_bitbang_ops ste_mii_bitbang_ops = {
ste_mii_bitbang_read,
ste_mii_bitbang_write,
{
STE_PHYCTL_MDATA, /* MII_BIT_MDO */
STE_PHYCTL_MDATA, /* MII_BIT_MDI */
STE_PHYCTL_MCLK, /* MII_BIT_MDC */
STE_PHYCTL_MDIR, /* MII_BIT_DIR_HOST_PHY */
0, /* MII_BIT_DIR_PHY_HOST */
}
};
static device_method_t ste_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ste_probe),
DEVMETHOD(device_attach, ste_attach),
DEVMETHOD(device_detach, ste_detach),
DEVMETHOD(device_shutdown, ste_shutdown),
DEVMETHOD(device_suspend, ste_suspend),
DEVMETHOD(device_resume, ste_resume),
/* MII interface */
DEVMETHOD(miibus_readreg, ste_miibus_readreg),
DEVMETHOD(miibus_writereg, ste_miibus_writereg),
DEVMETHOD(miibus_statchg, ste_miibus_statchg),
DEVMETHOD_END
};
static driver_t ste_driver = {
"ste",
ste_methods,
sizeof(struct ste_softc)
};
static devclass_t ste_devclass;
DRIVER_MODULE(ste, pci, ste_driver, ste_devclass, 0, 0);
Un-do the changes to the DRIVER_MODULE() declarations in these drivers. This whole idea isn't going to work until somebody makes the bus/kld code smarter. The idea here is to change the module's internal name from "foo" to "if_foo" so that ifconfig can tell a network driver from a non-network one. However doing this doesn't work correctly no matter how you slice it. For everything to work, you have to change the name in both the driver_t struct and the DRIVER_MODULE() declaration. The problems are: - If you change the name in both places, then the kernel thinks that the device's name is now "if_foo", so you get things like: if_foo0: <FOO ethernet> irq foo at device foo on pcifoo if_foo0: Ethernet address: foo:foo:foo:foo:foo:foo This is bogus. Now the device name doesn't agree with the logical interface name. There's no reason for this, and it violates the principle of least astonishment. - If you leave the name in the driver_t struct as "foo" and only change the names in the DRIVER_MODULE() declaration to "if_foo" then attaching drivers to child devices doesn't work because the names don't agree. This breaks miibus: drivers that need to have miibuses and PHY drivers attached never get them. In other words: damned if you do, damned if you don't. This needs to be thought through some more. Since the drivers that use miibus are broken, I have to change these all back in order to make them work again. Yes this will stop ifconfig from being able to demand load driver modules. On the whole, I'd rather have that than having the drivers not work at all.
1999-09-20 19:06:45 +00:00
DRIVER_MODULE(miibus, ste, miibus_driver, miibus_devclass, 0, 0);
#define STE_SETBIT4(sc, reg, x) \
CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x))
#define STE_CLRBIT4(sc, reg, x) \
CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x))
#define STE_SETBIT2(sc, reg, x) \
CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) | (x))
#define STE_CLRBIT2(sc, reg, x) \
CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) & ~(x))
#define STE_SETBIT1(sc, reg, x) \
CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) | (x))
#define STE_CLRBIT1(sc, reg, x) \
CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) & ~(x))
/*
* Read the MII serial port for the MII bit-bang module.
*/
static uint32_t
ste_mii_bitbang_read(device_t dev)
{
struct ste_softc *sc;
uint32_t val;
sc = device_get_softc(dev);
val = CSR_READ_1(sc, STE_PHYCTL);
CSR_BARRIER(sc, STE_PHYCTL, 1,
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
return (val);
}
/*
* Write the MII serial port for the MII bit-bang module.
*/
static void
ste_mii_bitbang_write(device_t dev, uint32_t val)
{
struct ste_softc *sc;
sc = device_get_softc(dev);
CSR_WRITE_1(sc, STE_PHYCTL, val);
CSR_BARRIER(sc, STE_PHYCTL, 1,
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
}
static int
2009-12-21 19:50:29 +00:00
ste_miibus_readreg(device_t dev, int phy, int reg)
{
return (mii_bitbang_readreg(dev, &ste_mii_bitbang_ops, phy, reg));
}
static int
2009-12-21 19:50:29 +00:00
ste_miibus_writereg(device_t dev, int phy, int reg, int data)
{
mii_bitbang_writereg(dev, &ste_mii_bitbang_ops, phy, reg, data);
2009-12-21 20:18:01 +00:00
return (0);
}
static void
2009-12-21 19:50:29 +00:00
ste_miibus_statchg(device_t dev)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct mii_data *mii;
struct ifnet *ifp;
uint16_t cfg;
sc = device_get_softc(dev);
mii = device_get_softc(sc->ste_miibus);
ifp = sc->ste_ifp;
if (mii == NULL || ifp == NULL ||
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
return;
sc->ste_flags &= ~STE_FLAG_LINK;
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
(IFM_ACTIVE | IFM_AVALID)) {
switch (IFM_SUBTYPE(mii->mii_media_active)) {
case IFM_10_T:
case IFM_100_TX:
case IFM_100_FX:
case IFM_100_T4:
sc->ste_flags |= STE_FLAG_LINK;
default:
break;
}
}
/* Program MACs with resolved speed/duplex/flow-control. */
if ((sc->ste_flags & STE_FLAG_LINK) != 0) {
cfg = CSR_READ_2(sc, STE_MACCTL0);
cfg &= ~(STE_MACCTL0_FLOWCTL_ENABLE | STE_MACCTL0_FULLDUPLEX);
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) {
/*
* ST201 data sheet says driver should enable receiving
* MAC control frames bit of receive mode register to
* receive flow-control frames but the register has no
* such bits. In addition the controller has no ability
* to send pause frames so it should be handled in
* driver. Implementing pause timer handling in driver
* layer is not trivial, so don't enable flow-control
* here.
*/
cfg |= STE_MACCTL0_FULLDUPLEX;
}
CSR_WRITE_2(sc, STE_MACCTL0, cfg);
}
}
2009-12-21 20:02:12 +00:00
static int
2009-12-21 19:50:29 +00:00
ste_ifmedia_upd(struct ifnet *ifp)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct mii_data *mii;
struct mii_softc *miisc;
int error;
sc = ifp->if_softc;
STE_LOCK(sc);
mii = device_get_softc(sc->ste_miibus);
- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP (reporting IFM_LOOP based on BMCR_LOOP is left in place though as it might provide useful for debugging). For most mii(4) drivers it was unclear whether the PHYs driven by them actually support loopback or not. Moreover, typically loopback mode also needs to be activated on the MAC, which none of the Ethernet drivers using mii(4) implements. Given that loopback media has no real use (and obviously hardly had a chance to actually work) besides for driver development (which just loopback mode should be sufficient for though, i.e one doesn't necessary need support for loopback media) support for it is just dropped as both NetBSD and OpenBSD already did quite some time ago. - Let mii_phy_add_media() also announce the support of IFM_NONE. - Restructure the PHY entry points to use a structure of entry points instead of discrete function pointers, and extend this to include a "reset" entry point. Make sure any PHY-specific reset routine is always used, and provide one for lxtphy(4) which disables MII interrupts (as is done for a few other PHYs we have drivers for). This includes changing NIC drivers which previously just called the generic mii_phy_reset() to now actually call the PHY-specific reset routine, which might be crucial in some cases. While at it, the redundant checks in these NIC drivers for mii->mii_instance not being zero before calling the reset routines were removed because as soon as one PHY driver attaches mii->mii_instance is incremented and we hardly can end up in their media change callbacks etc if no PHY driver has attached as mii_attach() would have failed in that case and not attach a miibus(4) instance. Consequently, NIC drivers now no longer should call mii_phy_reset() directly, so it was removed from EXPORT_SYMS. - Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe(). The purpose of that function is to perform the common steps to attach a PHY driver instance and to hook it up to the miibus(4) instance and to optionally also handle the probing, addition and initialization of the supported media. So all a PHY driver without any special requirements has to do in its bus attach method is to call mii_phy_dev_attach() along with PHY-specific MIIF_* flags, a pointer to its PHY functions and the add_media set to one. All PHY drivers were updated to take advantage of mii_phy_dev_attach() as appropriate. Along with these changes the capability mask was added to the mii_softc structure so PHY drivers taking advantage of mii_phy_dev_attach() but still handling media on their own do not need to fiddle with the MII attach arguments anyway. - Keep track of the PHY offset in the mii_softc structure. This is done for compatibility with NetBSD/OpenBSD. - Keep track of the PHY's OUI, model and revision in the mii_softc structure. Several PHY drivers require this information also after attaching and previously had to wrap their own softc around mii_softc. NetBSD/OpenBSD also keep track of the model and revision on their mii_softc structure. All PHY drivers were updated to take advantage as appropriate. - Convert the mebers of the MII data structure to unsigned where appropriate. This is partly inspired by NetBSD/OpenBSD. - According to IEEE 802.3-2002 the bits actually have to be reversed when mapping an OUI to the MII ID registers. All PHY drivers and miidevs where changed as necessary. Actually this now again allows to largely share miidevs with NetBSD, which fixed this problem already 9 years ago. Consequently miidevs was synced as far as possible. - Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that weren't explicitly converted to support flow control before. It's unclear whether flow control actually works with these but typically it should and their net behavior should be more correct with these changes in place than without if the MAC driver sets MIIF_DOPAUSE. Obtained from: NetBSD (partially) Reviewed by: yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
PHY_RESET(miisc);
error = mii_mediachg(mii);
STE_UNLOCK(sc);
return (error);
}
static void
2009-12-21 19:50:29 +00:00
ste_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->ste_miibus);
STE_LOCK(sc);
if ((ifp->if_flags & IFF_UP) == 0) {
STE_UNLOCK(sc);
return;
}
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
STE_UNLOCK(sc);
}
static void
2009-12-21 19:50:29 +00:00
ste_wait(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
int i;
for (i = 0; i < STE_TIMEOUT; i++) {
if (!(CSR_READ_4(sc, STE_DMACTL) & STE_DMACTL_DMA_HALTINPROG))
break;
DELAY(1);
}
if (i == STE_TIMEOUT)
device_printf(sc->ste_dev, "command never completed!\n");
}
/*
* The EEPROM is slow: give it time to come ready after issuing
* it a command.
*/
static int
2009-12-21 19:50:29 +00:00
ste_eeprom_wait(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
int i;
DELAY(1000);
for (i = 0; i < 100; i++) {
if (CSR_READ_2(sc, STE_EEPROM_CTL) & STE_EECTL_BUSY)
DELAY(1000);
else
break;
}
if (i == 100) {
device_printf(sc->ste_dev, "eeprom failed to come ready\n");
2009-12-21 20:18:01 +00:00
return (1);
}
2009-12-21 20:18:01 +00:00
return (0);
}
/*
* Read a sequence of words from the EEPROM. Note that ethernet address
* data is stored in the EEPROM in network byte order.
*/
static int
ste_read_eeprom(struct ste_softc *sc, uint16_t *dest, int off, int cnt)
{
2009-12-21 20:18:01 +00:00
int err = 0, i;
if (ste_eeprom_wait(sc))
2009-12-21 20:18:01 +00:00
return (1);
for (i = 0; i < cnt; i++) {
CSR_WRITE_2(sc, STE_EEPROM_CTL, STE_EEOPCODE_READ | (off + i));
err = ste_eeprom_wait(sc);
if (err)
break;
*dest = le16toh(CSR_READ_2(sc, STE_EEPROM_DATA));
dest++;
}
2009-12-21 20:18:01 +00:00
return (err ? 1 : 0);
}
static void
ste_rxfilter(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
struct ifmultiaddr *ifma;
uint32_t hashes[2] = { 0, 0 };
uint8_t rxcfg;
2009-12-21 20:18:01 +00:00
int h;
STE_LOCK_ASSERT(sc);
ifp = sc->ste_ifp;
rxcfg = CSR_READ_1(sc, STE_RX_MODE);
rxcfg |= STE_RXMODE_UNICAST;
rxcfg &= ~(STE_RXMODE_ALLMULTI | STE_RXMODE_MULTIHASH |
STE_RXMODE_BROADCAST | STE_RXMODE_PROMISC);
if (ifp->if_flags & IFF_BROADCAST)
rxcfg |= STE_RXMODE_BROADCAST;
if ((ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) != 0) {
if ((ifp->if_flags & IFF_ALLMULTI) != 0)
rxcfg |= STE_RXMODE_ALLMULTI;
if ((ifp->if_flags & IFF_PROMISC) != 0)
rxcfg |= STE_RXMODE_PROMISC;
goto chipit;
}
rxcfg |= STE_RXMODE_MULTIHASH;
/* Now program new ones. */
if_maddr_rlock(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN) & 0x3F;
if (h < 32)
hashes[0] |= (1 << h);
else
hashes[1] |= (1 << (h - 32));
}
if_maddr_runlock(ifp);
chipit:
CSR_WRITE_2(sc, STE_MAR0, hashes[0] & 0xFFFF);
CSR_WRITE_2(sc, STE_MAR1, (hashes[0] >> 16) & 0xFFFF);
CSR_WRITE_2(sc, STE_MAR2, hashes[1] & 0xFFFF);
CSR_WRITE_2(sc, STE_MAR3, (hashes[1] >> 16) & 0xFFFF);
CSR_WRITE_1(sc, STE_RX_MODE, rxcfg);
CSR_READ_1(sc, STE_RX_MODE);
}
#ifdef DEVICE_POLLING
static poll_handler_t ste_poll, ste_poll_locked;
static int
ste_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct ste_softc *sc = ifp->if_softc;
int rx_npkts = 0;
STE_LOCK(sc);
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
rx_npkts = ste_poll_locked(ifp, cmd, count);
STE_UNLOCK(sc);
return (rx_npkts);
}
static int
ste_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct ste_softc *sc = ifp->if_softc;
int rx_npkts;
STE_LOCK_ASSERT(sc);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
rx_npkts = ste_rxeof(sc, count);
ste_txeof(sc);
ste_txeoc(sc);
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
ste_start_locked(ifp);
if (cmd == POLL_AND_CHECK_STATUS) {
2009-12-21 20:00:27 +00:00
uint16_t status;
status = CSR_READ_2(sc, STE_ISR_ACK);
if (status & STE_ISR_STATS_OFLOW)
ste_stats_update(sc);
if (status & STE_ISR_HOSTERR) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
ste_init_locked(sc);
}
}
return (rx_npkts);
}
#endif /* DEVICE_POLLING */
static void
2009-12-21 19:50:29 +00:00
ste_intr(void *xsc)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct ifnet *ifp;
uint16_t intrs, status;
sc = xsc;
STE_LOCK(sc);
ifp = sc->ste_ifp;
#ifdef DEVICE_POLLING
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
if (ifp->if_capenable & IFCAP_POLLING) {
STE_UNLOCK(sc);
return;
}
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
#endif
/* Reading STE_ISR_ACK clears STE_IMR register. */
status = CSR_READ_2(sc, STE_ISR_ACK);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
STE_UNLOCK(sc);
return;
}
intrs = STE_INTRS;
if (status == 0xFFFF || (status & intrs) == 0)
goto done;
if (sc->ste_int_rx_act > 0) {
status &= ~STE_ISR_RX_DMADONE;
intrs &= ~STE_IMR_RX_DMADONE;
}
if ((status & (STE_ISR_SOFTINTR | STE_ISR_RX_DMADONE)) != 0) {
ste_rxeof(sc, -1);
/*
* The controller has no ability to Rx interrupt
* moderation feature. Receiving 64 bytes frames
* from wire generates too many interrupts which in
* turn make system useless to process other useful
* things. Fortunately ST201 supports single shot
* timer so use the timer to implement Rx interrupt
* moderation in driver. This adds more register
* access but it greatly reduces number of Rx
* interrupts under high network load.
*/
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0 &&
(sc->ste_int_rx_mod != 0)) {
if ((status & STE_ISR_RX_DMADONE) != 0) {
CSR_WRITE_2(sc, STE_COUNTDOWN,
STE_TIMER_USECS(sc->ste_int_rx_mod));
intrs &= ~STE_IMR_RX_DMADONE;
sc->ste_int_rx_act = 1;
} else {
intrs |= STE_IMR_RX_DMADONE;
sc->ste_int_rx_act = 0;
}
}
}
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
if ((status & STE_ISR_TX_DMADONE) != 0)
ste_txeof(sc);
if ((status & STE_ISR_TX_DONE) != 0)
ste_txeoc(sc);
if ((status & STE_ISR_STATS_OFLOW) != 0)
ste_stats_update(sc);
if ((status & STE_ISR_HOSTERR) != 0) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
ste_init_locked(sc);
STE_UNLOCK(sc);
return;
}
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
ste_start_locked(ifp);
done:
/* Re-enable interrupts */
CSR_WRITE_2(sc, STE_IMR, intrs);
}
STE_UNLOCK(sc);
}
/*
* A frame has been uploaded: pass the resulting mbuf chain up to
* the higher level protocols.
*/
static int
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ste_rxeof(struct ste_softc *sc, int count)
{
2009-12-21 20:18:01 +00:00
struct mbuf *m;
struct ifnet *ifp;
struct ste_chain_onefrag *cur_rx;
uint32_t rxstat;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
int total_len, rx_npkts;
ifp = sc->ste_ifp;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamap_sync(sc->ste_cdata.ste_rx_list_tag,
sc->ste_cdata.ste_rx_list_map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
cur_rx = sc->ste_cdata.ste_rx_head;
for (rx_npkts = 0; rx_npkts < STE_RX_LIST_CNT; rx_npkts++,
cur_rx = cur_rx->ste_next) {
rxstat = le32toh(cur_rx->ste_ptr->ste_status);
if ((rxstat & STE_RXSTAT_DMADONE) == 0)
break;
#ifdef DEVICE_POLLING
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
if (ifp->if_capenable & IFCAP_POLLING) {
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (count == 0)
break;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
count--;
}
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
#endif
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
break;
/*
* If an error occurs, update stats, clear the
* status word and leave the mbuf cluster in place:
* it should simply get re-used next time this descriptor
* comes up in the ring.
*/
if (rxstat & STE_RXSTAT_FRAME_ERR) {
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
cur_rx->ste_ptr->ste_status = 0;
continue;
}
2009-12-21 20:02:12 +00:00
/* No errors; receive the packet. */
m = cur_rx->ste_mbuf;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
total_len = STE_RX_BYTES(rxstat);
/*
* Try to conjure up a new mbuf cluster. If that
* fails, it means we have an out of memory condition and
* should leave the buffer in place and continue. This will
* result in a lost packet, but there's little else we
* can do in this situation.
*/
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (ste_newbuf(sc, cur_rx) != 0) {
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
cur_rx->ste_ptr->ste_status = 0;
continue;
}
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = m->m_len = total_len;
if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1);
STE_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
STE_LOCK(sc);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (rx_npkts > 0) {
sc->ste_cdata.ste_rx_head = cur_rx;
bus_dmamap_sync(sc->ste_cdata.ste_rx_list_tag,
sc->ste_cdata.ste_rx_list_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
return (rx_npkts);
}
static void
2009-12-21 19:50:29 +00:00
ste_txeoc(struct ste_softc *sc)
{
uint16_t txstat;
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
STE_LOCK_ASSERT(sc);
ifp = sc->ste_ifp;
/*
* STE_TX_STATUS register implements a queue of up to 31
* transmit status byte. Writing an arbitrary value to the
* register will advance the queue to the next transmit
* status byte. This means if driver does not read
* STE_TX_STATUS register after completing sending more
* than 31 frames the controller would be stalled so driver
* should re-wake the Tx MAC. This is the most severe
* limitation of ST201 based controller.
*/
for (;;) {
txstat = CSR_READ_2(sc, STE_TX_STATUS);
if ((txstat & STE_TXSTATUS_TXDONE) == 0)
break;
if ((txstat & (STE_TXSTATUS_UNDERRUN |
STE_TXSTATUS_EXCESSCOLLS | STE_TXSTATUS_RECLAIMERR |
STE_TXSTATUS_STATSOFLOW)) != 0) {
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
#ifdef STE_SHOW_TXERRORS
device_printf(sc->ste_dev, "TX error : 0x%b\n",
txstat & 0xFF, STE_ERR_BITS);
#endif
if ((txstat & STE_TXSTATUS_UNDERRUN) != 0 &&
sc->ste_tx_thresh < STE_PACKET_SIZE) {
sc->ste_tx_thresh += STE_MIN_FRAMELEN;
if (sc->ste_tx_thresh > STE_PACKET_SIZE)
sc->ste_tx_thresh = STE_PACKET_SIZE;
device_printf(sc->ste_dev,
"TX underrun, increasing TX"
" start threshold to %d bytes\n",
sc->ste_tx_thresh);
/* Make sure to disable active DMA cycles. */
STE_SETBIT4(sc, STE_DMACTL,
STE_DMACTL_TXDMA_STALL);
ste_wait(sc);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
ste_init_locked(sc);
break;
}
/* Restart Tx. */
ste_restart_tx(sc);
}
/*
* Advance to next status and ACK TxComplete
* interrupt. ST201 data sheet was wrong here, to
* get next Tx status, we have to write both
* STE_TX_STATUS and STE_TX_FRAMEID register.
* Otherwise controller returns the same status
* as well as not acknowledge Tx completion
* interrupt.
*/
CSR_WRITE_2(sc, STE_TX_STATUS, txstat);
}
}
static void
ste_tick(void *arg)
{
struct ste_softc *sc;
struct mii_data *mii;
sc = (struct ste_softc *)arg;
STE_LOCK_ASSERT(sc);
mii = device_get_softc(sc->ste_miibus);
mii_tick(mii);
/*
* ukphy(4) does not seem to generate CB that reports
* resolved link state so if we know we lost a link,
* explicitly check the link state.
*/
if ((sc->ste_flags & STE_FLAG_LINK) == 0)
ste_miibus_statchg(sc->ste_dev);
/*
* Because we are not generating Tx completion
* interrupt for every frame, reclaim transmitted
* buffers here.
*/
ste_txeof(sc);
ste_txeoc(sc);
ste_stats_update(sc);
ste_watchdog(sc);
callout_reset(&sc->ste_callout, hz, ste_tick, sc);
}
static void
2009-12-21 19:50:29 +00:00
ste_txeof(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
struct ste_chain *cur_tx;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
uint32_t txstat;
2009-12-21 20:18:01 +00:00
int idx;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
STE_LOCK_ASSERT(sc);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ifp = sc->ste_ifp;
idx = sc->ste_cdata.ste_tx_cons;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (idx == sc->ste_cdata.ste_tx_prod)
return;
bus_dmamap_sync(sc->ste_cdata.ste_tx_list_tag,
sc->ste_cdata.ste_tx_list_map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
2009-12-21 20:18:01 +00:00
while (idx != sc->ste_cdata.ste_tx_prod) {
cur_tx = &sc->ste_cdata.ste_tx_chain[idx];
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
txstat = le32toh(cur_tx->ste_ptr->ste_ctl);
if ((txstat & STE_TXCTL_DMADONE) == 0)
break;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamap_sync(sc->ste_cdata.ste_tx_tag, cur_tx->ste_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->ste_cdata.ste_tx_tag, cur_tx->ste_map);
KASSERT(cur_tx->ste_mbuf != NULL,
("%s: freeing NULL mbuf!\n", __func__));
m_freem(cur_tx->ste_mbuf);
cur_tx->ste_mbuf = NULL;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
sc->ste_cdata.ste_tx_cnt--;
STE_INC(idx, STE_TX_LIST_CNT);
}
sc->ste_cdata.ste_tx_cons = idx;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (sc->ste_cdata.ste_tx_cnt == 0)
sc->ste_timer = 0;
}
static void
ste_stats_clear(struct ste_softc *sc)
{
STE_LOCK_ASSERT(sc);
/* Rx stats. */
CSR_READ_2(sc, STE_STAT_RX_OCTETS_LO);
CSR_READ_2(sc, STE_STAT_RX_OCTETS_HI);
CSR_READ_2(sc, STE_STAT_RX_FRAMES);
CSR_READ_1(sc, STE_STAT_RX_BCAST);
CSR_READ_1(sc, STE_STAT_RX_MCAST);
CSR_READ_1(sc, STE_STAT_RX_LOST);
/* Tx stats. */
CSR_READ_2(sc, STE_STAT_TX_OCTETS_LO);
CSR_READ_2(sc, STE_STAT_TX_OCTETS_HI);
CSR_READ_2(sc, STE_STAT_TX_FRAMES);
CSR_READ_1(sc, STE_STAT_TX_BCAST);
CSR_READ_1(sc, STE_STAT_TX_MCAST);
CSR_READ_1(sc, STE_STAT_CARRIER_ERR);
CSR_READ_1(sc, STE_STAT_SINGLE_COLLS);
CSR_READ_1(sc, STE_STAT_MULTI_COLLS);
CSR_READ_1(sc, STE_STAT_LATE_COLLS);
CSR_READ_1(sc, STE_STAT_TX_DEFER);
CSR_READ_1(sc, STE_STAT_TX_EXDEFER);
CSR_READ_1(sc, STE_STAT_TX_ABORT);
}
static void
ste_stats_update(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
struct ste_hw_stats *stats;
uint32_t val;
STE_LOCK_ASSERT(sc);
ifp = sc->ste_ifp;
stats = &sc->ste_stats;
/* Rx stats. */
val = (uint32_t)CSR_READ_2(sc, STE_STAT_RX_OCTETS_LO) |
((uint32_t)CSR_READ_2(sc, STE_STAT_RX_OCTETS_HI)) << 16;
val &= 0x000FFFFF;
stats->rx_bytes += val;
stats->rx_frames += CSR_READ_2(sc, STE_STAT_RX_FRAMES);
stats->rx_bcast_frames += CSR_READ_1(sc, STE_STAT_RX_BCAST);
stats->rx_mcast_frames += CSR_READ_1(sc, STE_STAT_RX_MCAST);
stats->rx_lost_frames += CSR_READ_1(sc, STE_STAT_RX_LOST);
/* Tx stats. */
val = (uint32_t)CSR_READ_2(sc, STE_STAT_TX_OCTETS_LO) |
((uint32_t)CSR_READ_2(sc, STE_STAT_TX_OCTETS_HI)) << 16;
val &= 0x000FFFFF;
stats->tx_bytes += val;
stats->tx_frames += CSR_READ_2(sc, STE_STAT_TX_FRAMES);
stats->tx_bcast_frames += CSR_READ_1(sc, STE_STAT_TX_BCAST);
stats->tx_mcast_frames += CSR_READ_1(sc, STE_STAT_TX_MCAST);
stats->tx_carrsense_errs += CSR_READ_1(sc, STE_STAT_CARRIER_ERR);
val = CSR_READ_1(sc, STE_STAT_SINGLE_COLLS);
stats->tx_single_colls += val;
if_inc_counter(ifp, IFCOUNTER_COLLISIONS, val);
val = CSR_READ_1(sc, STE_STAT_MULTI_COLLS);
stats->tx_multi_colls += val;
if_inc_counter(ifp, IFCOUNTER_COLLISIONS, val);
val += CSR_READ_1(sc, STE_STAT_LATE_COLLS);
stats->tx_late_colls += val;
if_inc_counter(ifp, IFCOUNTER_COLLISIONS, val);
stats->tx_frames_defered += CSR_READ_1(sc, STE_STAT_TX_DEFER);
stats->tx_excess_defers += CSR_READ_1(sc, STE_STAT_TX_EXDEFER);
stats->tx_abort += CSR_READ_1(sc, STE_STAT_TX_ABORT);
}
/*
* Probe for a Sundance ST201 chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
*/
static int
2009-12-21 19:50:29 +00:00
ste_probe(device_t dev)
{
const struct ste_type *t;
t = ste_devs;
2009-12-21 20:18:01 +00:00
while (t->ste_name != NULL) {
if ((pci_get_vendor(dev) == t->ste_vid) &&
(pci_get_device(dev) == t->ste_did)) {
device_set_desc(dev, t->ste_name);
2005-02-24 21:32:56 +00:00
return (BUS_PROBE_DEFAULT);
}
t++;
}
2009-12-21 20:18:01 +00:00
return (ENXIO);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
static int
2009-12-21 19:50:29 +00:00
ste_attach(device_t dev)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct ifnet *ifp;
uint16_t eaddr[ETHER_ADDR_LEN / 2];
int error = 0, phy, pmc, prefer_iomap, rid;
sc = device_get_softc(dev);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
sc->ste_dev = dev;
/*
* Only use one PHY since this chip reports multiple
* Note on the DFE-550 the PHY is at 1 on the DFE-580
* it is at 0 & 1. It is rev 0x12.
*/
if (pci_get_vendor(dev) == DL_VENDORID &&
pci_get_device(dev) == DL_DEVICEID_DL10050 &&
pci_get_revid(dev) == 0x12 )
sc->ste_flags |= STE_FLAG_ONE_PHY;
mtx_init(&sc->ste_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
/*
* Map control/status registers.
*/
pci_enable_busmaster(dev);
/*
* Prefer memory space register mapping over IO space but use
* IO space for a device that is known to have issues on memory
* mapping.
*/
prefer_iomap = 0;
if (pci_get_device(dev) == ST_DEVICEID_ST201_1)
prefer_iomap = 1;
else
resource_int_value(device_get_name(sc->ste_dev),
device_get_unit(sc->ste_dev), "prefer_iomap",
&prefer_iomap);
if (prefer_iomap == 0) {
sc->ste_res_id = PCIR_BAR(1);
sc->ste_res_type = SYS_RES_MEMORY;
sc->ste_res = bus_alloc_resource_any(dev, sc->ste_res_type,
&sc->ste_res_id, RF_ACTIVE);
}
if (prefer_iomap || sc->ste_res == NULL) {
sc->ste_res_id = PCIR_BAR(0);
sc->ste_res_type = SYS_RES_IOPORT;
sc->ste_res = bus_alloc_resource_any(dev, sc->ste_res_type,
&sc->ste_res_id, RF_ACTIVE);
}
if (sc->ste_res == NULL) {
device_printf(dev, "couldn't map ports/memory\n");
error = ENXIO;
goto fail;
}
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
/* Allocate interrupt */
rid = 0;
sc->ste_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->ste_irq == NULL) {
device_printf(dev, "couldn't map interrupt\n");
error = ENXIO;
goto fail;
}
callout_init_mtx(&sc->ste_callout, &sc->ste_mtx, 0);
/* Reset the adapter. */
ste_reset(sc);
/*
* Get station address from the EEPROM.
*/
if (ste_read_eeprom(sc, eaddr, STE_EEADDR_NODE0, ETHER_ADDR_LEN / 2)) {
device_printf(dev, "failed to read station address\n");
error = ENXIO;
goto fail;
}
ste_sysctl_node(sc);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if ((error = ste_dma_alloc(sc)) != 0)
goto fail;
ifp = sc->ste_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
error = ENOSPC;
goto fail;
}
/* Do MII setup. */
phy = MII_PHY_ANY;
if ((sc->ste_flags & STE_FLAG_ONE_PHY) != 0)
phy = 0;
error = mii_attach(dev, &sc->ste_miibus, ifp, ste_ifmedia_upd,
ste_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, 0);
if (error != 0) {
device_printf(dev, "attaching PHYs failed\n");
goto fail;
}
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = ste_ioctl;
ifp->if_start = ste_start;
ifp->if_init = ste_init;
IFQ_SET_MAXLEN(&ifp->if_snd, STE_TX_LIST_CNT - 1);
ifp->if_snd.ifq_drv_maxlen = STE_TX_LIST_CNT - 1;
IFQ_SET_READY(&ifp->if_snd);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
sc->ste_tx_thresh = STE_TXSTART_THRESH;
/*
* Call MI attach routine.
*/
ether_ifattach(ifp, (uint8_t *)eaddr);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
/*
* Tell the upper layer(s) we support long frames.
*/
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
ifp->if_capabilities |= IFCAP_VLAN_MTU;
if (pci_find_cap(dev, PCIY_PMG, &pmc) == 0)
ifp->if_capabilities |= IFCAP_WOL_MAGIC;
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
ifp->if_capenable = ifp->if_capabilities;
#ifdef DEVICE_POLLING
ifp->if_capabilities |= IFCAP_POLLING;
#endif
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
/* Hook interrupt last to avoid having to lock softc */
error = bus_setup_intr(dev, sc->ste_irq, INTR_TYPE_NET | INTR_MPSAFE,
NULL, ste_intr, sc, &sc->ste_intrhand);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
if (error) {
device_printf(dev, "couldn't set up irq\n");
ether_ifdetach(ifp);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
goto fail;
}
fail:
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
if (error)
ste_detach(dev);
2009-12-21 20:18:01 +00:00
return (error);
}
/*
* Shutdown hardware and free up resources. This can be called any
* time after the mutex has been initialized. It is called in both
* the error case in attach and the normal detach case so it needs
* to be careful about only freeing resources that have actually been
* allocated.
*/
static int
2009-12-21 19:50:29 +00:00
ste_detach(device_t dev)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
KASSERT(mtx_initialized(&sc->ste_mtx), ("ste mutex not initialized"));
ifp = sc->ste_ifp;
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING)
ether_poll_deregister(ifp);
#endif
/* These should only be active if attach succeeded */
if (device_is_attached(dev)) {
ether_ifdetach(ifp);
STE_LOCK(sc);
ste_stop(sc);
STE_UNLOCK(sc);
callout_drain(&sc->ste_callout);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
}
if (sc->ste_miibus)
device_delete_child(dev, sc->ste_miibus);
bus_generic_detach(dev);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
if (sc->ste_intrhand)
bus_teardown_intr(dev, sc->ste_irq, sc->ste_intrhand);
if (sc->ste_irq)
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ste_irq);
if (sc->ste_res)
bus_release_resource(dev, sc->ste_res_type, sc->ste_res_id,
sc->ste_res);
if (ifp)
if_free(ifp);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ste_dma_free(sc);
mtx_destroy(&sc->ste_mtx);
2009-12-21 20:18:01 +00:00
return (0);
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
struct ste_dmamap_arg {
bus_addr_t ste_busaddr;
};
static void
ste_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct ste_dmamap_arg *ctx;
if (error != 0)
return;
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
ctx = (struct ste_dmamap_arg *)arg;
ctx->ste_busaddr = segs[0].ds_addr;
}
static int
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ste_dma_alloc(struct ste_softc *sc)
{
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
struct ste_chain *txc;
struct ste_chain_onefrag *rxc;
struct ste_dmamap_arg ctx;
int error, i;
/* Create parent DMA tag. */
error = bus_dma_tag_create(
bus_get_dma_tag(sc->ste_dev), /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
0, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ste_cdata.ste_parent_tag);
if (error != 0) {
device_printf(sc->ste_dev,
"could not create parent DMA tag.\n");
goto fail;
}
/* Create DMA tag for Tx descriptor list. */
error = bus_dma_tag_create(
sc->ste_cdata.ste_parent_tag, /* parent */
STE_DESC_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
STE_TX_LIST_SZ, /* maxsize */
1, /* nsegments */
STE_TX_LIST_SZ, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ste_cdata.ste_tx_list_tag);
if (error != 0) {
device_printf(sc->ste_dev,
"could not create Tx list DMA tag.\n");
goto fail;
}
/* Create DMA tag for Rx descriptor list. */
error = bus_dma_tag_create(
sc->ste_cdata.ste_parent_tag, /* parent */
STE_DESC_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
STE_RX_LIST_SZ, /* maxsize */
1, /* nsegments */
STE_RX_LIST_SZ, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ste_cdata.ste_rx_list_tag);
if (error != 0) {
device_printf(sc->ste_dev,
"could not create Rx list DMA tag.\n");
goto fail;
}
/* Create DMA tag for Tx buffers. */
error = bus_dma_tag_create(
sc->ste_cdata.ste_parent_tag, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES * STE_MAXFRAGS, /* maxsize */
STE_MAXFRAGS, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ste_cdata.ste_tx_tag);
if (error != 0) {
device_printf(sc->ste_dev, "could not create Tx DMA tag.\n");
goto fail;
}
/* Create DMA tag for Rx buffers. */
error = bus_dma_tag_create(
sc->ste_cdata.ste_parent_tag, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES, /* maxsize */
1, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->ste_cdata.ste_rx_tag);
if (error != 0) {
device_printf(sc->ste_dev, "could not create Rx DMA tag.\n");
goto fail;
}
/* Allocate DMA'able memory and load the DMA map for Tx list. */
error = bus_dmamem_alloc(sc->ste_cdata.ste_tx_list_tag,
(void **)&sc->ste_ldata.ste_tx_list,
BUS_DMA_WAITOK | BUS_DMA_ZERO | BUS_DMA_COHERENT,
&sc->ste_cdata.ste_tx_list_map);
if (error != 0) {
device_printf(sc->ste_dev,
"could not allocate DMA'able memory for Tx list.\n");
goto fail;
}
ctx.ste_busaddr = 0;
error = bus_dmamap_load(sc->ste_cdata.ste_tx_list_tag,
sc->ste_cdata.ste_tx_list_map, sc->ste_ldata.ste_tx_list,
STE_TX_LIST_SZ, ste_dmamap_cb, &ctx, 0);
if (error != 0 || ctx.ste_busaddr == 0) {
device_printf(sc->ste_dev,
"could not load DMA'able memory for Tx list.\n");
goto fail;
}
sc->ste_ldata.ste_tx_list_paddr = ctx.ste_busaddr;
/* Allocate DMA'able memory and load the DMA map for Rx list. */
error = bus_dmamem_alloc(sc->ste_cdata.ste_rx_list_tag,
(void **)&sc->ste_ldata.ste_rx_list,
BUS_DMA_WAITOK | BUS_DMA_ZERO | BUS_DMA_COHERENT,
&sc->ste_cdata.ste_rx_list_map);
if (error != 0) {
device_printf(sc->ste_dev,
"could not allocate DMA'able memory for Rx list.\n");
goto fail;
}
ctx.ste_busaddr = 0;
error = bus_dmamap_load(sc->ste_cdata.ste_rx_list_tag,
sc->ste_cdata.ste_rx_list_map, sc->ste_ldata.ste_rx_list,
STE_RX_LIST_SZ, ste_dmamap_cb, &ctx, 0);
if (error != 0 || ctx.ste_busaddr == 0) {
device_printf(sc->ste_dev,
"could not load DMA'able memory for Rx list.\n");
goto fail;
}
sc->ste_ldata.ste_rx_list_paddr = ctx.ste_busaddr;
/* Create DMA maps for Tx buffers. */
for (i = 0; i < STE_TX_LIST_CNT; i++) {
txc = &sc->ste_cdata.ste_tx_chain[i];
txc->ste_ptr = NULL;
txc->ste_mbuf = NULL;
txc->ste_next = NULL;
txc->ste_phys = 0;
txc->ste_map = NULL;
error = bus_dmamap_create(sc->ste_cdata.ste_tx_tag, 0,
&txc->ste_map);
if (error != 0) {
device_printf(sc->ste_dev,
"could not create Tx dmamap.\n");
goto fail;
}
}
/* Create DMA maps for Rx buffers. */
if ((error = bus_dmamap_create(sc->ste_cdata.ste_rx_tag, 0,
&sc->ste_cdata.ste_rx_sparemap)) != 0) {
device_printf(sc->ste_dev,
"could not create spare Rx dmamap.\n");
goto fail;
}
for (i = 0; i < STE_RX_LIST_CNT; i++) {
rxc = &sc->ste_cdata.ste_rx_chain[i];
rxc->ste_ptr = NULL;
rxc->ste_mbuf = NULL;
rxc->ste_next = NULL;
rxc->ste_map = NULL;
error = bus_dmamap_create(sc->ste_cdata.ste_rx_tag, 0,
&rxc->ste_map);
if (error != 0) {
device_printf(sc->ste_dev,
"could not create Rx dmamap.\n");
goto fail;
}
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
fail:
return (error);
}
static void
ste_dma_free(struct ste_softc *sc)
{
struct ste_chain *txc;
struct ste_chain_onefrag *rxc;
int i;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
/* Tx buffers. */
if (sc->ste_cdata.ste_tx_tag != NULL) {
for (i = 0; i < STE_TX_LIST_CNT; i++) {
txc = &sc->ste_cdata.ste_tx_chain[i];
if (txc->ste_map != NULL) {
bus_dmamap_destroy(sc->ste_cdata.ste_tx_tag,
txc->ste_map);
txc->ste_map = NULL;
}
}
bus_dma_tag_destroy(sc->ste_cdata.ste_tx_tag);
sc->ste_cdata.ste_tx_tag = NULL;
}
/* Rx buffers. */
if (sc->ste_cdata.ste_rx_tag != NULL) {
for (i = 0; i < STE_RX_LIST_CNT; i++) {
rxc = &sc->ste_cdata.ste_rx_chain[i];
if (rxc->ste_map != NULL) {
bus_dmamap_destroy(sc->ste_cdata.ste_rx_tag,
rxc->ste_map);
rxc->ste_map = NULL;
}
}
if (sc->ste_cdata.ste_rx_sparemap != NULL) {
bus_dmamap_destroy(sc->ste_cdata.ste_rx_tag,
sc->ste_cdata.ste_rx_sparemap);
sc->ste_cdata.ste_rx_sparemap = NULL;
}
bus_dma_tag_destroy(sc->ste_cdata.ste_rx_tag);
sc->ste_cdata.ste_rx_tag = NULL;
}
/* Tx descriptor list. */
if (sc->ste_cdata.ste_tx_list_tag != NULL) {
if (sc->ste_ldata.ste_tx_list_paddr != 0)
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamap_unload(sc->ste_cdata.ste_tx_list_tag,
sc->ste_cdata.ste_tx_list_map);
if (sc->ste_ldata.ste_tx_list != NULL)
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamem_free(sc->ste_cdata.ste_tx_list_tag,
sc->ste_ldata.ste_tx_list,
sc->ste_cdata.ste_tx_list_map);
sc->ste_ldata.ste_tx_list = NULL;
sc->ste_ldata.ste_tx_list_paddr = 0;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dma_tag_destroy(sc->ste_cdata.ste_tx_list_tag);
sc->ste_cdata.ste_tx_list_tag = NULL;
}
/* Rx descriptor list. */
if (sc->ste_cdata.ste_rx_list_tag != NULL) {
if (sc->ste_ldata.ste_rx_list_paddr != 0)
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamap_unload(sc->ste_cdata.ste_rx_list_tag,
sc->ste_cdata.ste_rx_list_map);
if (sc->ste_ldata.ste_rx_list != NULL)
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamem_free(sc->ste_cdata.ste_rx_list_tag,
sc->ste_ldata.ste_rx_list,
sc->ste_cdata.ste_rx_list_map);
sc->ste_ldata.ste_rx_list = NULL;
sc->ste_ldata.ste_rx_list_paddr = 0;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dma_tag_destroy(sc->ste_cdata.ste_rx_list_tag);
sc->ste_cdata.ste_rx_list_tag = NULL;
}
if (sc->ste_cdata.ste_parent_tag != NULL) {
bus_dma_tag_destroy(sc->ste_cdata.ste_parent_tag);
sc->ste_cdata.ste_parent_tag = NULL;
}
}
static int
ste_newbuf(struct ste_softc *sc, struct ste_chain_onefrag *rxc)
{
struct mbuf *m;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
int error, nsegs;
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (m == NULL)
return (ENOBUFS);
m->m_len = m->m_pkthdr.len = MCLBYTES;
m_adj(m, ETHER_ALIGN);
if ((error = bus_dmamap_load_mbuf_sg(sc->ste_cdata.ste_rx_tag,
sc->ste_cdata.ste_rx_sparemap, m, segs, &nsegs, 0)) != 0) {
m_freem(m);
return (error);
}
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (rxc->ste_mbuf != NULL) {
bus_dmamap_sync(sc->ste_cdata.ste_rx_tag, rxc->ste_map,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->ste_cdata.ste_rx_tag, rxc->ste_map);
}
map = rxc->ste_map;
rxc->ste_map = sc->ste_cdata.ste_rx_sparemap;
sc->ste_cdata.ste_rx_sparemap = map;
bus_dmamap_sync(sc->ste_cdata.ste_rx_tag, rxc->ste_map,
BUS_DMASYNC_PREREAD);
rxc->ste_mbuf = m;
rxc->ste_ptr->ste_status = 0;
rxc->ste_ptr->ste_frag.ste_addr = htole32(segs[0].ds_addr);
rxc->ste_ptr->ste_frag.ste_len = htole32(segs[0].ds_len |
STE_FRAG_LAST);
2009-12-21 20:18:01 +00:00
return (0);
}
static int
2009-12-21 19:50:29 +00:00
ste_init_rx_list(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ste_chain_data *cd;
struct ste_list_data *ld;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
int error, i;
sc->ste_int_rx_act = 0;
cd = &sc->ste_cdata;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ld = &sc->ste_ldata;
bzero(ld->ste_rx_list, STE_RX_LIST_SZ);
for (i = 0; i < STE_RX_LIST_CNT; i++) {
cd->ste_rx_chain[i].ste_ptr = &ld->ste_rx_list[i];
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
error = ste_newbuf(sc, &cd->ste_rx_chain[i]);
if (error != 0)
return (error);
if (i == (STE_RX_LIST_CNT - 1)) {
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cd->ste_rx_chain[i].ste_next = &cd->ste_rx_chain[0];
ld->ste_rx_list[i].ste_next =
htole32(ld->ste_rx_list_paddr +
(sizeof(struct ste_desc_onefrag) * 0));
} else {
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cd->ste_rx_chain[i].ste_next = &cd->ste_rx_chain[i + 1];
ld->ste_rx_list[i].ste_next =
htole32(ld->ste_rx_list_paddr +
(sizeof(struct ste_desc_onefrag) * (i + 1)));
}
}
cd->ste_rx_head = &cd->ste_rx_chain[0];
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamap_sync(sc->ste_cdata.ste_rx_list_tag,
sc->ste_cdata.ste_rx_list_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2009-12-21 20:18:01 +00:00
return (0);
}
static void
2009-12-21 19:50:29 +00:00
ste_init_tx_list(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ste_chain_data *cd;
struct ste_list_data *ld;
int i;
cd = &sc->ste_cdata;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ld = &sc->ste_ldata;
bzero(ld->ste_tx_list, STE_TX_LIST_SZ);
for (i = 0; i < STE_TX_LIST_CNT; i++) {
cd->ste_tx_chain[i].ste_ptr = &ld->ste_tx_list[i];
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cd->ste_tx_chain[i].ste_mbuf = NULL;
if (i == (STE_TX_LIST_CNT - 1)) {
cd->ste_tx_chain[i].ste_next = &cd->ste_tx_chain[0];
cd->ste_tx_chain[i].ste_phys = htole32(STE_ADDR_LO(
ld->ste_tx_list_paddr +
(sizeof(struct ste_desc) * 0)));
} else {
cd->ste_tx_chain[i].ste_next = &cd->ste_tx_chain[i + 1];
cd->ste_tx_chain[i].ste_phys = htole32(STE_ADDR_LO(
ld->ste_tx_list_paddr +
(sizeof(struct ste_desc) * (i + 1))));
}
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cd->ste_last_tx = NULL;
cd->ste_tx_prod = 0;
cd->ste_tx_cons = 0;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cd->ste_tx_cnt = 0;
bus_dmamap_sync(sc->ste_cdata.ste_tx_list_tag,
sc->ste_cdata.ste_tx_list_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
static void
2009-12-21 19:50:29 +00:00
ste_init(void *xsc)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
sc = xsc;
STE_LOCK(sc);
ste_init_locked(sc);
STE_UNLOCK(sc);
}
static void
2009-12-21 19:50:29 +00:00
ste_init_locked(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
struct mii_data *mii;
uint8_t val;
2009-12-21 20:18:01 +00:00
int i;
STE_LOCK_ASSERT(sc);
ifp = sc->ste_ifp;
mii = device_get_softc(sc->ste_miibus);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
return;
ste_stop(sc);
/* Reset the chip to a known state. */
ste_reset(sc);
/* Init our MAC address */
for (i = 0; i < ETHER_ADDR_LEN; i += 2) {
CSR_WRITE_2(sc, STE_PAR0 + i,
((IF_LLADDR(sc->ste_ifp)[i] & 0xff) |
IF_LLADDR(sc->ste_ifp)[i + 1] << 8));
}
/* Init RX list */
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (ste_init_rx_list(sc) != 0) {
device_printf(sc->ste_dev,
"initialization failed: no memory for RX buffers\n");
ste_stop(sc);
return;
}
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
/* Set RX polling interval */
CSR_WRITE_1(sc, STE_RX_DMAPOLL_PERIOD, 64);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
/* Init TX descriptors */
ste_init_tx_list(sc);
/* Clear and disable WOL. */
val = CSR_READ_1(sc, STE_WAKE_EVENT);
val &= ~(STE_WAKEEVENT_WAKEPKT_ENB | STE_WAKEEVENT_MAGICPKT_ENB |
STE_WAKEEVENT_LINKEVT_ENB | STE_WAKEEVENT_WAKEONLAN_ENB);
CSR_WRITE_1(sc, STE_WAKE_EVENT, val);
/* Set the TX freethresh value */
CSR_WRITE_1(sc, STE_TX_DMABURST_THRESH, STE_PACKET_SIZE >> 8);
/* Set the TX start threshold for best performance. */
CSR_WRITE_2(sc, STE_TX_STARTTHRESH, sc->ste_tx_thresh);
/* Set the TX reclaim threshold. */
CSR_WRITE_1(sc, STE_TX_RECLAIM_THRESH, (STE_PACKET_SIZE >> 4));
/* Accept VLAN length packets */
CSR_WRITE_2(sc, STE_MAX_FRAMELEN, ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN);
/* Set up the RX filter. */
ste_rxfilter(sc);
/* Load the address of the RX list. */
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_STALL);
ste_wait(sc);
CSR_WRITE_4(sc, STE_RX_DMALIST_PTR,
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
STE_ADDR_LO(sc->ste_ldata.ste_rx_list_paddr));
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
/* Set TX polling interval(defer until we TX first packet). */
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
CSR_WRITE_1(sc, STE_TX_DMAPOLL_PERIOD, 0);
/* Load address of the TX list */
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
ste_wait(sc);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
CSR_WRITE_4(sc, STE_TX_DMALIST_PTR, 0);
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
ste_wait(sc);
/* Select 3.2us timer. */
STE_CLRBIT4(sc, STE_DMACTL, STE_DMACTL_COUNTDOWN_SPEED |
STE_DMACTL_COUNTDOWN_MODE);
/* Enable receiver and transmitter */
CSR_WRITE_2(sc, STE_MACCTL0, 0);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
CSR_WRITE_2(sc, STE_MACCTL1, 0);
STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_TX_ENABLE);
STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_RX_ENABLE);
/* Enable stats counters. */
STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_STATS_ENABLE);
/* Clear stats counters. */
ste_stats_clear(sc);
CSR_WRITE_2(sc, STE_COUNTDOWN, 0);
CSR_WRITE_2(sc, STE_ISR, 0xFFFF);
#ifdef DEVICE_POLLING
/* Disable interrupts if we are polling. */
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
if (ifp->if_capenable & IFCAP_POLLING)
CSR_WRITE_2(sc, STE_IMR, 0);
2009-12-21 20:02:12 +00:00
else
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
#endif
/* Enable interrupts. */
CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
sc->ste_flags &= ~STE_FLAG_LINK;
/* Switch to the current media. */
mii_mediachg(mii);
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
callout_reset(&sc->ste_callout, hz, ste_tick, sc);
}
static void
2009-12-21 19:50:29 +00:00
ste_stop(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
struct ste_chain_onefrag *cur_rx;
struct ste_chain *cur_tx;
uint32_t val;
2009-12-21 20:18:01 +00:00
int i;
STE_LOCK_ASSERT(sc);
ifp = sc->ste_ifp;
callout_stop(&sc->ste_callout);
sc->ste_timer = 0;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING|IFF_DRV_OACTIVE);
CSR_WRITE_2(sc, STE_IMR, 0);
CSR_WRITE_2(sc, STE_COUNTDOWN, 0);
/* Stop pending DMA. */
val = CSR_READ_4(sc, STE_DMACTL);
val |= STE_DMACTL_TXDMA_STALL | STE_DMACTL_RXDMA_STALL;
CSR_WRITE_4(sc, STE_DMACTL, val);
ste_wait(sc);
/* Disable auto-polling. */
CSR_WRITE_1(sc, STE_RX_DMAPOLL_PERIOD, 0);
CSR_WRITE_1(sc, STE_TX_DMAPOLL_PERIOD, 0);
/* Nullify DMA address to stop any further DMA. */
CSR_WRITE_4(sc, STE_RX_DMALIST_PTR, 0);
CSR_WRITE_4(sc, STE_TX_DMALIST_PTR, 0);
/* Stop TX/RX MAC. */
val = CSR_READ_2(sc, STE_MACCTL1);
val |= STE_MACCTL1_TX_DISABLE | STE_MACCTL1_RX_DISABLE |
STE_MACCTL1_STATS_DISABLE;
CSR_WRITE_2(sc, STE_MACCTL1, val);
for (i = 0; i < STE_TIMEOUT; i++) {
DELAY(10);
if ((CSR_READ_2(sc, STE_MACCTL1) & (STE_MACCTL1_TX_DISABLE |
STE_MACCTL1_RX_DISABLE | STE_MACCTL1_STATS_DISABLE)) == 0)
break;
}
if (i == STE_TIMEOUT)
device_printf(sc->ste_dev, "Stopping MAC timed out\n");
/* Acknowledge any pending interrupts. */
CSR_READ_2(sc, STE_ISR_ACK);
ste_stats_update(sc);
for (i = 0; i < STE_RX_LIST_CNT; i++) {
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cur_rx = &sc->ste_cdata.ste_rx_chain[i];
if (cur_rx->ste_mbuf != NULL) {
bus_dmamap_sync(sc->ste_cdata.ste_rx_tag,
cur_rx->ste_map, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->ste_cdata.ste_rx_tag,
cur_rx->ste_map);
m_freem(cur_rx->ste_mbuf);
cur_rx->ste_mbuf = NULL;
}
}
for (i = 0; i < STE_TX_LIST_CNT; i++) {
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cur_tx = &sc->ste_cdata.ste_tx_chain[i];
if (cur_tx->ste_mbuf != NULL) {
bus_dmamap_sync(sc->ste_cdata.ste_tx_tag,
cur_tx->ste_map, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->ste_cdata.ste_tx_tag,
cur_tx->ste_map);
m_freem(cur_tx->ste_mbuf);
cur_tx->ste_mbuf = NULL;
}
}
}
static void
2009-12-21 19:50:29 +00:00
ste_reset(struct ste_softc *sc)
{
uint32_t ctl;
2009-12-21 20:18:01 +00:00
int i;
ctl = CSR_READ_4(sc, STE_ASICCTL);
ctl |= STE_ASICCTL_GLOBAL_RESET | STE_ASICCTL_RX_RESET |
STE_ASICCTL_TX_RESET | STE_ASICCTL_DMA_RESET |
STE_ASICCTL_FIFO_RESET | STE_ASICCTL_NETWORK_RESET |
STE_ASICCTL_AUTOINIT_RESET |STE_ASICCTL_HOST_RESET |
STE_ASICCTL_EXTRESET_RESET;
CSR_WRITE_4(sc, STE_ASICCTL, ctl);
CSR_READ_4(sc, STE_ASICCTL);
/*
* Due to the need of accessing EEPROM controller can take
* up to 1ms to complete the global reset.
*/
DELAY(1000);
for (i = 0; i < STE_TIMEOUT; i++) {
if (!(CSR_READ_4(sc, STE_ASICCTL) & STE_ASICCTL_RESET_BUSY))
break;
DELAY(10);
}
if (i == STE_TIMEOUT)
device_printf(sc->ste_dev, "global reset never completed\n");
}
static void
ste_restart_tx(struct ste_softc *sc)
{
uint16_t mac;
int i;
for (i = 0; i < STE_TIMEOUT; i++) {
mac = CSR_READ_2(sc, STE_MACCTL1);
mac |= STE_MACCTL1_TX_ENABLE;
CSR_WRITE_2(sc, STE_MACCTL1, mac);
mac = CSR_READ_2(sc, STE_MACCTL1);
if ((mac & STE_MACCTL1_TX_ENABLED) != 0)
break;
DELAY(10);
}
if (i == STE_TIMEOUT)
device_printf(sc->ste_dev, "starting Tx failed");
}
static int
2009-12-21 19:50:29 +00:00
ste_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct ifreq *ifr;
struct mii_data *mii;
int error = 0, mask;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
2009-12-21 20:18:01 +00:00
switch (command) {
case SIOCSIFFLAGS:
STE_LOCK(sc);
if ((ifp->if_flags & IFF_UP) != 0) {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0 &&
((ifp->if_flags ^ sc->ste_if_flags) &
(IFF_PROMISC | IFF_ALLMULTI)) != 0)
ste_rxfilter(sc);
else
ste_init_locked(sc);
} else if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
ste_stop(sc);
sc->ste_if_flags = ifp->if_flags;
STE_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
STE_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
ste_rxfilter(sc);
STE_UNLOCK(sc);
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
mii = device_get_softc(sc->ste_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
case SIOCSIFCAP:
STE_LOCK(sc);
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
#ifdef DEVICE_POLLING
if ((mask & IFCAP_POLLING) != 0 &&
(IFCAP_POLLING & ifp->if_capabilities) != 0) {
ifp->if_capenable ^= IFCAP_POLLING;
if ((IFCAP_POLLING & ifp->if_capenable) != 0) {
error = ether_poll_register(ste_poll, ifp);
if (error != 0) {
STE_UNLOCK(sc);
break;
}
/* Disable interrupts. */
CSR_WRITE_2(sc, STE_IMR, 0);
} else {
error = ether_poll_deregister(ifp);
/* Enable interrupts. */
CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
}
Big polling(4) cleanup. o Axe poll in trap. o Axe IFF_POLLING flag from if_flags. o Rework revision 1.21 (Giant removal), in such a way that poll_mtx is not dropped during call to polling handler. This fixes problem with idle polling. o Make registration and deregistration from polling in a functional way, insted of next tick/interrupt. o Obsolete kern.polling.enable. Polling is turned on/off with ifconfig. Detailed kern_poll.c changes: - Remove polling handler flags, introduced in 1.21. The are not needed now. - Forget and do not check if_flags, if_capenable and if_drv_flags. - Call all registered polling handlers unconditionally. - Do not drop poll_mtx, when entering polling handlers. - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx. - In netisr_poll() axe the block, where polling code asks drivers to unregister. - In netisr_poll() and ether_poll() do polling always, if any handlers are present. - In ether_poll_[de]register() remove a lot of error hiding code. Assert that arguments are correct, instead. - In ether_poll_[de]register() use standard return values in case of error or success. - Introduce poll_switch() that is a sysctl handler for kern.polling.enable. poll_switch() goes through interface list and enabled/disables polling. A message that kern.polling.enable is deprecated is printed. Detailed driver changes: - On attach driver announces IFCAP_POLLING in if_capabilities, but not in if_capenable. - On detach driver calls ether_poll_deregister() if polling is enabled. - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING flag. If there is no, then unlocks and returns. - In ioctl handler driver checks for IFCAP_POLLING flag requested to be set or cleared. Driver first calls ether_poll_[de]register(), then obtains driver lock and [dis/en]ables interrupts. - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable. If present, then returns.This is important to protect from spurious interrupts. Reviewed by: ru, sam, jhb
2005-10-01 18:56:19 +00:00
}
#endif /* DEVICE_POLLING */
if ((mask & IFCAP_WOL_MAGIC) != 0 &&
(ifp->if_capabilities & IFCAP_WOL_MAGIC) != 0)
ifp->if_capenable ^= IFCAP_WOL_MAGIC;
STE_UNLOCK(sc);
break;
default:
error = ether_ioctl(ifp, command, data);
break;
}
2009-12-21 20:18:01 +00:00
return (error);
}
static int
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ste_encap(struct ste_softc *sc, struct mbuf **m_head, struct ste_chain *txc)
{
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
struct ste_frag *frag;
2009-12-21 20:18:01 +00:00
struct mbuf *m;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
struct ste_desc *desc;
bus_dma_segment_t txsegs[STE_MAXFRAGS];
int error, i, nsegs;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
STE_LOCK_ASSERT(sc);
M_ASSERTPKTHDR((*m_head));
error = bus_dmamap_load_mbuf_sg(sc->ste_cdata.ste_tx_tag,
txc->ste_map, *m_head, txsegs, &nsegs, 0);
if (error == EFBIG) {
m = m_collapse(*m_head, M_NOWAIT, STE_MAXFRAGS);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (m == NULL) {
m_freem(*m_head);
*m_head = NULL;
return (ENOMEM);
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
*m_head = m;
error = bus_dmamap_load_mbuf_sg(sc->ste_cdata.ste_tx_tag,
txc->ste_map, *m_head, txsegs, &nsegs, 0);
if (error != 0) {
m_freem(*m_head);
*m_head = NULL;
return (error);
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
} else if (error != 0)
return (error);
if (nsegs == 0) {
m_freem(*m_head);
*m_head = NULL;
return (EIO);
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
bus_dmamap_sync(sc->ste_cdata.ste_tx_tag, txc->ste_map,
BUS_DMASYNC_PREWRITE);
desc = txc->ste_ptr;
for (i = 0; i < nsegs; i++) {
frag = &desc->ste_frags[i];
frag->ste_addr = htole32(STE_ADDR_LO(txsegs[i].ds_addr));
frag->ste_len = htole32(txsegs[i].ds_len);
}
desc->ste_frags[i - 1].ste_len |= htole32(STE_FRAG_LAST);
/*
* Because we use Tx polling we can't chain multiple
* Tx descriptors here. Otherwise we race with controller.
*/
desc->ste_next = 0;
if ((sc->ste_cdata.ste_tx_prod % STE_TX_INTR_FRAMES) == 0)
desc->ste_ctl = htole32(STE_TXCTL_ALIGN_DIS |
STE_TXCTL_DMAINTR);
else
desc->ste_ctl = htole32(STE_TXCTL_ALIGN_DIS);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
txc->ste_mbuf = *m_head;
STE_INC(sc->ste_cdata.ste_tx_prod, STE_TX_LIST_CNT);
sc->ste_cdata.ste_tx_cnt++;
2009-12-21 20:18:01 +00:00
return (0);
}
static void
2009-12-21 19:50:29 +00:00
ste_start(struct ifnet *ifp)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
sc = ifp->if_softc;
STE_LOCK(sc);
ste_start_locked(ifp);
STE_UNLOCK(sc);
}
static void
2009-12-21 19:50:29 +00:00
ste_start_locked(struct ifnet *ifp)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
struct ste_chain *cur_tx;
struct mbuf *m_head = NULL;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
int enq;
sc = ifp->if_softc;
STE_LOCK_ASSERT(sc);
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING || (sc->ste_flags & STE_FLAG_LINK) == 0)
return;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd);) {
if (sc->ste_cdata.ste_tx_cnt == STE_TX_LIST_CNT - 1) {
/*
* Controller may have cached copy of the last used
* next ptr so we have to reserve one TFD to avoid
* TFD overruns.
*/
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
cur_tx = &sc->ste_cdata.ste_tx_chain[sc->ste_cdata.ste_tx_prod];
if (ste_encap(sc, &m_head, cur_tx) != 0) {
if (m_head == NULL)
break;
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
break;
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
}
if (sc->ste_cdata.ste_last_tx == NULL) {
bus_dmamap_sync(sc->ste_cdata.ste_tx_list_tag,
sc->ste_cdata.ste_tx_list_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
ste_wait(sc);
CSR_WRITE_4(sc, STE_TX_DMALIST_PTR,
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
STE_ADDR_LO(sc->ste_ldata.ste_tx_list_paddr));
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
CSR_WRITE_1(sc, STE_TX_DMAPOLL_PERIOD, 64);
STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
ste_wait(sc);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
} else {
sc->ste_cdata.ste_last_tx->ste_ptr->ste_next =
sc->ste_cdata.ste_last_tx->ste_phys;
bus_dmamap_sync(sc->ste_cdata.ste_tx_list_tag,
sc->ste_cdata.ste_tx_list_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
sc->ste_cdata.ste_last_tx = cur_tx;
Fixes for the D-Link DFE-580 card. This is pretty much fixes any issue I can find: - Watchdog timeouts were due to starting the TX DMA engine before we had a packet ready for it. So the first packet sent never got out only if we sent more then one packet at a time did the others make it out and not blow up. Of course reseting the chip then caused us not to transmit the first packet again ie. catch-22. This required logic changes. - Combine interrupts on TX packets being queued up. - Don't keep running around the RX ring since we might get out of sync so only go around once per receive - Let the RX engine recover via the poll interface which is similar to the TX interface. This way the chip wakes up with no effort when we read enough packets. - Do better hand-shaking on RX & TX packets so they don't start of to soon. - Force a duplex setting when the link comes up after an ste_init or it will default to half-duplex and be really slow. This only happens on subsequent ste_init. The first one worked. - Don't call stat_update for every overflow. We only monitor the collisions so the tick interval is good enough for that. Just read in the collision stats to minimize bus reads. - Don't read the miibus every tick since it uses delays and delays are not good for performance. - Tie link events directly to the miibus code so the port gets set correctly if someone changes the port settings. - Reduce the extreme number of {R,T}FD's. They would consume 130K of kernel memory for each NIC. - Set the TX_THRESH to wait for the DMA engine to complete before running the TX FIFO. This hurts peak TX performance but under bi-directional load the DMA engine can't keep up with the FIFO. Testing shows that we end up in the case anyways (a la dc(4) issues but worse since the RX engine hogs everything). - When stopping the card do a reset since the reset verifies the card has stopped. Otherwise on heavy RX load the RX DMA engine is still stuffing packets into memory. If that happens after we free the DMA area memory bits get scribled in memory and bad things happen. This card still has seemingly unfixable issues under heavy RX load in which the card takes over the PCI bus. Sponsored by: Vernier Networks MFC after: 1 week
2002-08-07 22:31:27 +00:00
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
enq++;
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
BPF_MTAP(ifp, m_head);
}
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
if (enq > 0)
sc->ste_timer = STE_TX_TIMEOUT;
}
static void
ste_watchdog(struct ste_softc *sc)
{
2009-12-21 20:18:01 +00:00
struct ifnet *ifp;
ifp = sc->ste_ifp;
STE_LOCK_ASSERT(sc);
if (sc->ste_timer == 0 || --sc->ste_timer)
return;
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
if_printf(ifp, "watchdog timeout\n");
ste_txeof(sc);
ste_txeoc(sc);
Add bus_dma(9) and endianness support to ste(4). o Sorted includes and added missing header files. o Added basic endianness support. In theory ste(4) should work on any architectures. o Remove the use of contigmalloc(9), contigfree(9) and vtophys(9). o Added 8 byte alignment limitation of TX/RX descriptor. o Added 1 byte alignment requirement for TX/RX buffers. o ste(4) controllers does not support DAC. Limit DMA address space to be within 32bit address. o Added spare DMA map to gracefully recover from DMA map failure. o Removed dead code for checking STE_RXSTAT_DMADONE bit. The bit was already checked in each iteration of loop so it can't be true. o Added second argument count to ste_rxeof(). It is used to limit number of iterations done in RX handler. ATM polling is the only consumer. o Removed ste_rxeoc() which was added to address RX stuck issue (cvs rev 1.66). Unlike TX descriptors, ST201 supports chaining descriptors to form a ring for RX descriptors. If RX descriptor chaining is not supported it's possible for controller to stop receiving incoming frames once controller pass the end of RX descriptor which in turn requires driver post new RX descriptors to receive more frames. For TX descriptors which does not support chaning, we exactly do manual chaining in driver by concatenating new descriptors to the end of previous TX chain. Maybe the workaround was borrowed from other drivers that does not support RX descriptor chaining, which is not valid for ST201 controllers. I still have no idea how this address RX stuck issue and I can't reproduce the RX stuck issue on DFE-550TX controller. o Removed hw.ste_rxsyncs sysctl as the workaround was removed. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Reimplemented optimized ste_encap(). o Simplified TX logic of ste_start_locked(). o Added comments for TFD/RFD requirements. o Increased number of RX descriptors to 128 from 64. 128 gave much better performance than 64 under high network loads.
2009-12-22 18:57:07 +00:00
ste_rxeof(sc, -1);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
ste_init_locked(sc);
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
ste_start_locked(ifp);
}
static int
2009-12-21 19:50:29 +00:00
ste_shutdown(device_t dev)
{
return (ste_suspend(dev));
}
static int
ste_suspend(device_t dev)
{
2009-12-21 20:18:01 +00:00
struct ste_softc *sc;
sc = device_get_softc(dev);
STE_LOCK(sc);
ste_stop(sc);
ste_setwol(sc);
STE_UNLOCK(sc);
return (0);
}
static int
ste_resume(device_t dev)
{
struct ste_softc *sc;
struct ifnet *ifp;
int pmc;
uint16_t pmstat;
sc = device_get_softc(dev);
STE_LOCK(sc);
if (pci_find_cap(sc->ste_dev, PCIY_PMG, &pmc) == 0) {
/* Disable PME and clear PME status. */
pmstat = pci_read_config(sc->ste_dev,
pmc + PCIR_POWER_STATUS, 2);
if ((pmstat & PCIM_PSTAT_PMEENABLE) != 0) {
pmstat &= ~PCIM_PSTAT_PMEENABLE;
pci_write_config(sc->ste_dev,
pmc + PCIR_POWER_STATUS, pmstat, 2);
}
}
ifp = sc->ste_ifp;
if ((ifp->if_flags & IFF_UP) != 0) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
ste_init_locked(sc);
}
STE_UNLOCK(sc);
return (0);
}
#define STE_SYSCTL_STAT_ADD32(c, h, n, p, d) \
SYSCTL_ADD_UINT(c, h, OID_AUTO, n, CTLFLAG_RD, p, 0, d)
#define STE_SYSCTL_STAT_ADD64(c, h, n, p, d) \
SYSCTL_ADD_UQUAD(c, h, OID_AUTO, n, CTLFLAG_RD, p, d)
static void
ste_sysctl_node(struct ste_softc *sc)
{
struct sysctl_ctx_list *ctx;
struct sysctl_oid_list *child, *parent;
struct sysctl_oid *tree;
struct ste_hw_stats *stats;
stats = &sc->ste_stats;
ctx = device_get_sysctl_ctx(sc->ste_dev);
child = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->ste_dev));
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "int_rx_mod",
CTLFLAG_RW, &sc->ste_int_rx_mod, 0, "ste RX interrupt moderation");
/* Pull in device tunables. */
sc->ste_int_rx_mod = STE_IM_RX_TIMER_DEFAULT;
resource_int_value(device_get_name(sc->ste_dev),
device_get_unit(sc->ste_dev), "int_rx_mod", &sc->ste_int_rx_mod);
tree = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "stats", CTLFLAG_RD,
NULL, "STE statistics");
parent = SYSCTL_CHILDREN(tree);
/* Rx statistics. */
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "rx", CTLFLAG_RD,
NULL, "Rx MAC statistics");
child = SYSCTL_CHILDREN(tree);
STE_SYSCTL_STAT_ADD64(ctx, child, "good_octets",
&stats->rx_bytes, "Good octets");
STE_SYSCTL_STAT_ADD32(ctx, child, "good_frames",
&stats->rx_frames, "Good frames");
STE_SYSCTL_STAT_ADD32(ctx, child, "good_bcast_frames",
&stats->rx_bcast_frames, "Good broadcast frames");
STE_SYSCTL_STAT_ADD32(ctx, child, "good_mcast_frames",
&stats->rx_mcast_frames, "Good multicast frames");
STE_SYSCTL_STAT_ADD32(ctx, child, "lost_frames",
&stats->rx_lost_frames, "Lost frames");
/* Tx statistics. */
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "tx", CTLFLAG_RD,
NULL, "Tx MAC statistics");
child = SYSCTL_CHILDREN(tree);
STE_SYSCTL_STAT_ADD64(ctx, child, "good_octets",
&stats->tx_bytes, "Good octets");
STE_SYSCTL_STAT_ADD32(ctx, child, "good_frames",
&stats->tx_frames, "Good frames");
STE_SYSCTL_STAT_ADD32(ctx, child, "good_bcast_frames",
&stats->tx_bcast_frames, "Good broadcast frames");
STE_SYSCTL_STAT_ADD32(ctx, child, "good_mcast_frames",
&stats->tx_mcast_frames, "Good multicast frames");
STE_SYSCTL_STAT_ADD32(ctx, child, "carrier_errs",
&stats->tx_carrsense_errs, "Carrier sense errors");
STE_SYSCTL_STAT_ADD32(ctx, child, "single_colls",
&stats->tx_single_colls, "Single collisions");
STE_SYSCTL_STAT_ADD32(ctx, child, "multi_colls",
&stats->tx_multi_colls, "Multiple collisions");
STE_SYSCTL_STAT_ADD32(ctx, child, "late_colls",
&stats->tx_late_colls, "Late collisions");
STE_SYSCTL_STAT_ADD32(ctx, child, "defers",
&stats->tx_frames_defered, "Frames with deferrals");
STE_SYSCTL_STAT_ADD32(ctx, child, "excess_defers",
&stats->tx_excess_defers, "Frames with excessive derferrals");
STE_SYSCTL_STAT_ADD32(ctx, child, "abort",
&stats->tx_abort, "Aborted frames due to Excessive collisions");
}
#undef STE_SYSCTL_STAT_ADD32
#undef STE_SYSCTL_STAT_ADD64
static void
ste_setwol(struct ste_softc *sc)
{
struct ifnet *ifp;
uint16_t pmstat;
uint8_t val;
int pmc;
STE_LOCK_ASSERT(sc);
if (pci_find_cap(sc->ste_dev, PCIY_PMG, &pmc) != 0) {
/* Disable WOL. */
CSR_READ_1(sc, STE_WAKE_EVENT);
CSR_WRITE_1(sc, STE_WAKE_EVENT, 0);
return;
}
ifp = sc->ste_ifp;
val = CSR_READ_1(sc, STE_WAKE_EVENT);
val &= ~(STE_WAKEEVENT_WAKEPKT_ENB | STE_WAKEEVENT_MAGICPKT_ENB |
STE_WAKEEVENT_LINKEVT_ENB | STE_WAKEEVENT_WAKEONLAN_ENB);
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
val |= STE_WAKEEVENT_MAGICPKT_ENB | STE_WAKEEVENT_WAKEONLAN_ENB;
CSR_WRITE_1(sc, STE_WAKE_EVENT, val);
/* Request PME. */
pmstat = pci_read_config(sc->ste_dev, pmc + PCIR_POWER_STATUS, 2);
pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
pci_write_config(sc->ste_dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
}