d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
634e1583d3
freebsd-skq/sys/mips/cavium/octeon_machdep.c

663 lines
18 KiB
C
Raw Normal View History

Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
/*-
* Copyright (c) 2006 Wojciech A. Koszek <wkoszek@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#include <sys/conf.h>
#include <sys/kernel.h>
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
#include <sys/systm.h>
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#include <sys/imgact.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/cons.h>
#include <sys/exec.h>
#include <sys/ucontext.h>
#include <sys/proc.h>
#include <sys/kdb.h>
#include <sys/ptrace.h>
#include <sys/reboot.h>
#include <sys/signalvar.h>
Add a sysctl to change the LED display.
2012-10-29 07:06:23 +00:00
#include <sys/sysctl.h>
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#include <sys/sysent.h>
#include <sys/sysproto.h>
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#include <sys/time.h>
#include <sys/timetc.h>
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#include <sys/user.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <machine/atomic.h>
#include <machine/cache.h>
#include <machine/clock.h>
#include <machine/cpu.h>
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
#include <machine/cpuregs.h>
#include <machine/cpufunc.h>
Cope with the move and if_timer going way.
2010-01-11 04:29:26 +00:00
#include <mips/cavium/octeon_pcmap_regs.h>
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#include <machine/hwfunc.h>
#include <machine/intr_machdep.h>
#include <machine/locore.h>
#include <machine/md_var.h>
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
#include <machine/pcpu.h>
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#include <machine/pte.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#include <contrib/octeon-sdk/cvmx.h>
#include <contrib/octeon-sdk/cvmx-bootmem.h>
Use Simple Executive LED display routines, which correctly use the LED base address passed from the bootloader, rather than using a hard-coded value. Make FreeBSD announce itself on the LED display similar to other kernels. Remove uses of the previous LED routines, which were under-used and only used in drivers for what seem like debugging purposes, despite those drivers being widely-tested. Remove several inlines for accessing memory that duplicate other functions which are now used instead, as they are now entirely unused.
2012-10-29 00:51:53 +00:00
#include <contrib/octeon-sdk/cvmx-ebt3000.h>
Speed feature tests and initialize helper configuration that some CPUs require.
2012-10-30 06:07:30 +00:00
#include <contrib/octeon-sdk/cvmx-helper-cfg.h>
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#include <contrib/octeon-sdk/cvmx-interrupt.h>
#include <contrib/octeon-sdk/cvmx-version.h>
Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00
#include <mips/cavium/octeon_irq.h>
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
#if defined(__mips_n64)
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#define MAX_APP_DESC_ADDR 0xffffffffafffffff
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
#else
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#define MAX_APP_DESC_ADDR 0xafffffff
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
#endif
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
struct octeon_feature_description {
octeon_feature_t ofd_feature;
const char *ofd_string;
};
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
extern int *end;
Save the CPU model, the board and the CPU clock rate so they are reported by the approrpiate sysctl.
2011-01-17 23:03:09 +00:00
extern char cpu_model[];
extern char cpu_board[];
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
static const struct octeon_feature_description octeon_feature_descriptions[] = {
{ OCTEON_FEATURE_SAAD, "SAAD" },
{ OCTEON_FEATURE_ZIP, "ZIP" },
{ OCTEON_FEATURE_CRYPTO, "CRYPTO" },
Display some Octeon 2 features and a feature for distinguishing between PCIe implementations.
2010-11-30 01:27:54 +00:00
{ OCTEON_FEATURE_DORM_CRYPTO, "DORM_CRYPTO" },
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
{ OCTEON_FEATURE_PCIE, "PCIE" },
Display some Octeon 2 features and a feature for distinguishing between PCIe implementations.
2010-11-30 01:27:54 +00:00
{ OCTEON_FEATURE_SRIO, "SRIO" },
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
{ OCTEON_FEATURE_KEY_MEMORY, "KEY_MEMORY" },
{ OCTEON_FEATURE_LED_CONTROLLER, "LED_CONTROLLER" },
{ OCTEON_FEATURE_TRA, "TRA" },
{ OCTEON_FEATURE_MGMT_PORT, "MGMT_PORT" },
{ OCTEON_FEATURE_RAID, "RAID" },
{ OCTEON_FEATURE_USB, "USB" },
{ OCTEON_FEATURE_NO_WPTR, "NO_WPTR" },
{ OCTEON_FEATURE_DFA, "DFA" },
{ OCTEON_FEATURE_MDIO_CLAUSE_45, "MDIO_CLAUSE_45" },
Display some Octeon 2 features and a feature for distinguishing between PCIe implementations.
2010-11-30 01:27:54 +00:00
{ OCTEON_FEATURE_NPEI, "NPEI" },
Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00
{ OCTEON_FEATURE_ILK, "ILK" },
{ OCTEON_FEATURE_HFA, "HFA" },
{ OCTEON_FEATURE_DFM, "DFM" },
{ OCTEON_FEATURE_CIU2, "CIU2" },
{ OCTEON_FEATURE_DICI_MODE, "DICI_MODE" },
{ OCTEON_FEATURE_BIT_EXTRACTOR, "BIT_EXTRACTOR" },
{ OCTEON_FEATURE_NAND, "NAND" },
{ OCTEON_FEATURE_MMC, "MMC" },
{ OCTEON_FEATURE_PKND, "PKND" },
{ OCTEON_FEATURE_CN68XX_WQE, "CN68XX_WQE" },
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
{ 0, NULL }
};
static uint64_t octeon_get_ticks(void);
static unsigned octeon_get_timecount(struct timecounter *tc);
Hook up parsing of the boot records.
2009-12-10 01:45:06 +00:00
static void octeon_boot_params_init(register_t ptr);
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
static struct timecounter octeon_timecounter = {
octeon_get_timecount, /* get_timecount */
0, /* no poll_pps */
0xffffffffu, /* octeon_mask */
0, /* frequency */
"Octeon", /* name */
900, /* quality (adjusted in code) */
};
Hook up parsing of the boot records.
2009-12-10 01:45:06 +00:00
With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-)
2009-10-30 08:53:11 +00:00
void
platform_cpu_init()
{
/* Nothing special yet */
}
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
/*
* Perform a board-level soft-reset.
*/
Implement platform_reset. Also, make the code a tiny bit easier to read with ninja-C magic coupled with an illuminating comment.
2009-08-17 12:23:58 +00:00
void
platform_reset(void)
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
{
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
cvmx_write_csr(CVMX_CIU_SOFT_RST, 1);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
}
/*
* octeon_debug_symbol
*
* Does nothing.
* Used to mark the point for simulator to begin tracing
*/
Style(9) pass.
2010-01-04 20:34:15 +00:00
void
octeon_debug_symbol(void)
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
{
}
/*
* octeon_ciu_reset
*
* Shutdown all CIU to IP2, IP3 mappings
*/
Style(9) pass.
2010-01-04 20:34:15 +00:00
void
octeon_ciu_reset(void)
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
{
Remap PMC interrupt for all cores
2012-03-24 06:28:15 +00:00
uint64_t cvmctl;
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
/* Disable all CIU interrupts by default */
cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num()*2), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num()*2+1), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num()*2), 0);
cvmx_write_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num()*2+1), 0);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#ifdef SMP
/* Enable the MBOX interrupts. */
cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num()*2+1),
Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00
(1ull << (OCTEON_IRQ_MBOX0 - 8)) |
(1ull << (OCTEON_IRQ_MBOX1 - 8)));
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#endif
Remap PMC interrupt for all cores
2012-03-24 06:28:15 +00:00
/*
* Move the Performance Counter interrupt to OCTEON_PMC_IRQ
*/
cvmctl = mips_rd_cvmctl();
cvmctl &= ~(7 << 7);
cvmctl |= (OCTEON_PMC_IRQ + 2) << 7;
mips_wr_cvmctl(cvmctl);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
}
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
static void
octeon_memory_init(void)
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
{
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
vm_paddr_t phys_end;
int64_t addr;
- Populate dump_avail with proper values from phys_avail
2010-12-09 07:01:03 +00:00
unsigned i, j;
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
phys_end = round_page(MIPS_KSEG0_TO_PHYS((vm_offset_t)&end));
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Actually check board type rather than using a specialized octeon_is_simulation function.
2012-10-30 06:36:14 +00:00
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
/* Simulator we limit to 96 meg */
phys_avail[0] = phys_end;
phys_avail[1] = 96 << 20;
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
- Populate dump_avail with proper values from phys_avail
2010-12-09 07:01:03 +00:00
dump_avail[0] = phys_avail[0];
- dump_avail layout should be sequence of [start, end) pairs, not <start, size>. Spotted by: alc@
2010-12-09 07:47:40 +00:00
dump_avail[1] = phys_avail[1];
- Populate dump_avail with proper values from phys_avail
2010-12-09 07:01:03 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
realmem = physmem = btoc(phys_avail[1] - phys_avail[0]);
return;
Style(9) pass.
2010-01-04 20:34:15 +00:00
}
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
/*
* Allocate memory from bootmem 1MB at a time and merge
* adjacent entries.
*/
i = 0;
while (i < PHYS_AVAIL_ENTRIES) {
When allocating memory from bootmem for the kernel to use, try to leave about 2MB of memory in the bootmem allocator for the SDK to use internally at a later point. It'd be nice if there were some functions we could call before allocating memory to let various facilities reserve some memory, but for now this seems sufficient. Previously some unfortunate systems could give up all (or at least most) of their memory to the kernel from bootmem, and then allocating command queues for packet output and the like would fail later in the boot process (which in turn would lead to crashes even later.) Reported by: kan
2010-12-28 20:11:54 +00:00
/*
* If there is less than 2MB of memory available in 128-byte
* blocks, do not steal any more memory. We need to leave some
* memory for the command queues to be allocated out of.
*/
if (cvmx_bootmem_available_mem(128) < 2 << 20)
break;
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
addr = cvmx_bootmem_phy_alloc(1 << 20, phys_end,
~(vm_paddr_t)0, PAGE_SIZE, 0);
if (addr == -1)
break;
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Don't use memory that can't be direct-mapped on !n64.
2010-09-19 09:18:07 +00:00
/*
* The SDK needs to be able to easily map any memory that might
* come to it e.g. in the form of an mbuf. Because on !n64 we
* can't direct-map some addresses and we don't want to manage
* temporary mappings within the SDK, don't feed memory that
* can't be direct-mapped to the kernel.
*/
#if !defined(__mips_n64)
if (!MIPS_DIRECT_MAPPABLE(addr + (1 << 20) - 1))
continue;
#endif
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
physmem += btoc(1 << 20);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
if (i > 0 && phys_avail[i - 1] == addr) {
phys_avail[i - 1] += 1 << 20;
continue;
}
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
phys_avail[i + 0] = addr;
phys_avail[i + 1] = addr + (1 << 20);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
i += 2;
Style(9) pass.
2010-01-04 20:34:15 +00:00
}
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
- dump_avail layout should be sequence of [start, end) pairs, not <start, size>. Spotted by: alc@
2010-12-09 07:47:40 +00:00
for (j = 0; j < i; j++)
- Populate dump_avail with proper values from phys_avail
2010-12-09 07:01:03 +00:00
dump_avail[j] = phys_avail[j];
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
realmem = physmem;
}
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
void
Style(9) pass.
2010-01-04 20:34:15 +00:00
platform_start(__register_t a0, __register_t a1, __register_t a2 __unused,
__register_t a3)
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
{
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
const struct octeon_feature_description *ofd;
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
uint64_t platform_counter_freq;
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
int rv;
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
mips_postboot_fixup();
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
/*
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
* Initialize boot parameters so that we can determine things like
* which console we shoud use, etc.
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
*/
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
octeon_boot_params_init(a3);
Setup fake MODINFO variables for octeon kernel
2012-03-23 00:01:09 +00:00
Centralize initialization of pcpu, and set curthread early...
2010-01-08 22:48:21 +00:00
/* Initialize pcpu stuff */
Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype.
2010-01-09 03:08:22 +00:00
mips_pcpu0_init();
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
mips_timer_early_init(cvmx_sysinfo_get()->cpu_clock_hz);
/* Initialize console. */
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
cninit();
Centralize initialization of pcpu, and set curthread early...
2010-01-08 22:48:21 +00:00
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
/*
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
* Display information about the CPU.
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
*/
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
#if !defined(OCTEON_MODEL)
printf("Using runtime CPU model checks.\n");
#else
printf("Compiled for CPU model: " __XSTRING(OCTEON_MODEL) "\n");
#endif
strcpy(cpu_model, octeon_model_get_string(cvmx_get_proc_id()));
printf("CPU Model: %s\n", cpu_model);
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
printf("CPU clock: %uMHz Core Mask: %#x\n",
cvmx_sysinfo_get()->cpu_clock_hz / 1000000,
cvmx_sysinfo_get()->core_mask);
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
rv = octeon_model_version_check(cvmx_get_proc_id());
if (rv == -1)
panic("%s: kernel not compatible with this processor.", __func__);
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
/*
* Display information about the board.
*/
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
#if defined(OCTEON_BOARD_CAPK_0100ND)
strcpy(cpu_board, "CAPK-0100ND");
if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
panic("Compiled for %s, but board type is %s.", cpu_board,
cvmx_board_type_to_string(cvmx_sysinfo_get()->board_type));
}
#else
strcpy(cpu_board,
cvmx_board_type_to_string(cvmx_sysinfo_get()->board_type));
#endif
printf("Board: %s\n", cpu_board);
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
printf("Board Type: %u Revision: %u/%u\n",
cvmx_sysinfo_get()->board_type,
cvmx_sysinfo_get()->board_rev_major,
cvmx_sysinfo_get()->board_rev_minor);
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
printf("Serial number: %s\n", cvmx_sysinfo_get()->board_serial_number);
o) Add support for specifying a model of Octeon to target at compile-time, reducing the number of runtime checks done by the SDK code. o) Group board/CPU information at early startup by subject matter, so that e.g. CPU information is adjacent to CPU information and board information is adjacent to board information.
2012-11-24 02:00:29 +00:00
/*
* Additional on-chip hardware/settings.
*
* XXX Display PCI host/target? What else?
*/
printf("MAC address base: %6D (%u configured)\n",
cvmx_sysinfo_get()->mac_addr_base, ":",
cvmx_sysinfo_get()->mac_addr_count);
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
octeon_ciu_reset();
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
/*
* XXX
* We can certainly parse command line arguments or U-Boot environment
* to determine whether to bootverbose / single user / ... I think
* stass has patches to add support for loader things to U-Boot even.
*/
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
bootverbose = 1;
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
/*
* For some reason on the cn38xx simulator ebase register is set to
* 0x80001000 at bootup time. Move it back to the default, but
* when we move to having support for multiple executives, we need
* to rethink this.
*/
mips_wr_ebase(0x80000000);
Hook up parsing of the boot records.
2009-12-10 01:45:06 +00:00
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
octeon_memory_init();
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
init_param1();
init_param2(physmem);
mips_cpu_init();
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
pmap_bootstrap();
mips_proc0_init();
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
mutex_init();
kdb_init();
Migrate from old "DDB" style debugger to newer KDB style.
2010-01-23 00:24:31 +00:00
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
#endif
Save the CPU model, the board and the CPU clock rate so they are reported by the approrpiate sysctl.
2011-01-17 23:03:09 +00:00
cpu_clock = cvmx_sysinfo_get()->cpu_clock_hz;
platform_counter_freq = cpu_clock;
octeon_timecounter.tc_frequency = cpu_clock;
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
platform_timecounter = &octeon_timecounter;
o) Add SMP support for Octeon using U-Boot to launch all the processors at the same time. o) Remove some unused trivial uart functions from octeon_machdep now that the uart part is fully working and they are unused. o) Use __func__ instead of __FUNCTION__. o) Use intr_*() instead of other routines that do the same thing. o) Remove some duplicate printfs from the Octeon port, as well as duplicate setting of Maxmem. o) Use the right frequency divider on Octeon. o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core. o) Remove some unused macros in the Octeon port. o) Use mips_sync() around use of the global dpcpu, whose value may not be visible to APs at first. o) When loading the first thread's stack, use macros to make the code correct for n64 as well. o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX driver.
2010-04-17 03:08:13 +00:00
mips_timer_init_params(platform_counter_freq, 0);
Save the CPU model, the board and the CPU clock rate so they are reported by the approrpiate sysctl.
2011-01-17 23:03:09 +00:00
set_cputicker(octeon_get_ticks, cpu_clock, 0);
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
o) Add SMP support for Octeon using U-Boot to launch all the processors at the same time. o) Remove some unused trivial uart functions from octeon_machdep now that the uart part is fully working and they are unused. o) Use __func__ instead of __FUNCTION__. o) Use intr_*() instead of other routines that do the same thing. o) Remove some duplicate printfs from the Octeon port, as well as duplicate setting of Maxmem. o) Use the right frequency divider on Octeon. o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core. o) Remove some unused macros in the Octeon port. o) Use mips_sync() around use of the global dpcpu, whose value may not be visible to APs at first. o) When loading the first thread's stack, use macros to make the code correct for n64 as well. o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX driver.
2010-04-17 03:08:13 +00:00
#ifdef SMP
/*
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
* Clear any pending IPIs.
o) Add SMP support for Octeon using U-Boot to launch all the processors at the same time. o) Remove some unused trivial uart functions from octeon_machdep now that the uart part is fully working and they are unused. o) Use __func__ instead of __FUNCTION__. o) Use intr_*() instead of other routines that do the same thing. o) Remove some duplicate printfs from the Octeon port, as well as duplicate setting of Maxmem. o) Use the right frequency divider on Octeon. o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core. o) Remove some unused macros in the Octeon port. o) Use mips_sync() around use of the global dpcpu, whose value may not be visible to APs at first. o) When loading the first thread's stack, use macros to make the code correct for n64 as well. o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX driver.
2010-04-17 03:08:13 +00:00
*/
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(0), 0xffffffff);
o) Add SMP support for Octeon using U-Boot to launch all the processors at the same time. o) Remove some unused trivial uart functions from octeon_machdep now that the uart part is fully working and they are unused. o) Use __func__ instead of __FUNCTION__. o) Use intr_*() instead of other routines that do the same thing. o) Remove some duplicate printfs from the Octeon port, as well as duplicate setting of Maxmem. o) Use the right frequency divider on Octeon. o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core. o) Remove some unused macros in the Octeon port. o) Use mips_sync() around use of the global dpcpu, whose value may not be visible to APs at first. o) When loading the first thread's stack, use macros to make the code correct for n64 as well. o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX driver.
2010-04-17 03:08:13 +00:00
#endif
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
printf("Octeon SDK: %s\n", OCTEON_SDK_VERSION_STRING);
printf("Available Octeon features:");
for (ofd = octeon_feature_descriptions; ofd->ofd_string != NULL; ofd++)
if (octeon_has_feature(ofd->ofd_feature))
printf(" %s", ofd->ofd_string);
printf("\n");
}
static uint64_t
octeon_get_ticks(void)
{
uint64_t cvmcount;
CVMX_MF_CYCLE(cvmcount);
return (cvmcount);
}
static unsigned
octeon_get_timecount(struct timecounter *tc)
{
return ((unsigned)octeon_get_ticks());
First cut at a platform_start. It is likely wrong, but it is better than nothing :)
2009-08-15 21:42:04 +00:00
}
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Add a sysctl to change the LED display.
2012-10-29 07:06:23 +00:00
static int
sysctl_machdep_led_display(SYSCTL_HANDLER_ARGS)
{
size_t buflen;
char buf[9];
int error;
if (req->newptr == NULL)
return (EINVAL);
if (cvmx_sysinfo_get()->led_display_base_addr == 0)
return (ENODEV);
/*
* Revision 1.x of the EBT3000 only supports 4 characters, but
* other devices support 8.
*/
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBT3000 &&
cvmx_sysinfo_get()->board_rev_major == 1)
buflen = 4;
else
buflen = 8;
if (req->newlen > buflen)
return (E2BIG);
error = SYSCTL_IN(req, buf, req->newlen);
if (error != 0)
return (error);
buf[req->newlen] = '\0';
ebt3000_str_write(buf);
return (0);
}
SYSCTL_PROC(_machdep, OID_AUTO, led_display, CTLTYPE_STRING | CTLFLAG_WR,
NULL, 0, sysctl_machdep_led_display, "A",
"String to display on LED display");
Use bootverbose to control debug printfs from the Cavium Simple Executive code. Also remove an unnecessary CVMX_ENABLE_DEBUG_PRINTS conditional around what is already a cvmx_dprintf.
2012-11-24 02:12:24 +00:00
void
cvmx_dvprintf(const char *fmt, va_list ap)
{
if (!bootverbose)
return;
vprintf(fmt, ap);
}
void
cvmx_dprintf(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
cvmx_dvprintf(fmt, ap);
va_end(ap);
}
Merge Cavium Octeon SDK 2.0 Simple Executive; this brings some fixes and new facilities as well as support for the Octeon 2 family of SoCs. XXX Note that with our antediluvian assembler, we can't support some Octeon 2 instructions and fall back to using the old ones instead.
2010-11-28 08:18:16 +00:00
/**
* version of printf that works better in exception context.
*
* @param format
*
* XXX If this function weren't in cvmx-interrupt.c, we'd use the SDK version.
*/
void cvmx_safe_printf(const char *format, ...)
{
char buffer[256];
char *ptr = buffer;
int count;
va_list args;
va_start(args, format);
#ifndef __U_BOOT__
count = vsnprintf(buffer, sizeof(buffer), format, args);
#else
count = vsprintf(buffer, format, args);
#endif
va_end(args);
while (count-- > 0)
{
cvmx_uart_lsr_t lsrval;
/* Spin until there is room */
do
{
lsrval.u64 = cvmx_read_csr(CVMX_MIO_UARTX_LSR(0));
#if !defined(CONFIG_OCTEON_SIM_SPEED)
if (lsrval.s.temt == 0)
cvmx_wait(10000); /* Just to reduce the load on the system */
#endif
}
while (lsrval.s.temt == 0);
if (*ptr == '\n')
cvmx_write_csr(CVMX_MIO_UARTX_THR(0), '\r');
cvmx_write_csr(CVMX_MIO_UARTX_THR(0), *ptr++);
}
}
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
/* impSTART: This stuff should move back into the Cavium SDK */
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
/*
****************************************************************************************
*
* APP/BOOT DESCRIPTOR STUFF
*
****************************************************************************************
*/
/* Define the struct that is initialized by the bootloader used by the
* startup code.
*
* Copyright (c) 2004, 2005, 2006 Cavium Networks.
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
#define OCTEON_CURRENT_DESC_VERSION 6
#define OCTEON_ARGV_MAX_ARGS (64)
#define OCTOEN_SERIAL_LEN 20
typedef struct {
Hook up parsing of the boot records.
2009-12-10 01:45:06 +00:00
/* Start of block referenced by assembly code - do not change! */
uint32_t desc_version;
uint32_t desc_size;
uint64_t stack_top;
uint64_t heap_base;
uint64_t heap_end;
uint64_t entry_point; /* Only used by bootloader */
uint64_t desc_vaddr;
/* End of This block referenced by assembly code - do not change! */
uint32_t exception_base_addr;
uint32_t stack_size;
uint32_t heap_size;
uint32_t argc; /* Argc count for application */
uint32_t argv[OCTEON_ARGV_MAX_ARGS];
uint32_t flags;
uint32_t core_mask;
uint32_t dram_size; /**< DRAM size in megabyes */
uint32_t phy_mem_desc_addr; /**< physical address of free memory descriptor block*/
uint32_t debugger_flags_base_addr; /**< used to pass flags from app to debugger */
uint32_t eclock_hz; /**< CPU clock speed, in hz */
uint32_t dclock_hz; /**< DRAM clock speed, in hz */
uint32_t spi_clock_hz; /**< SPI4 clock in hz */
uint16_t board_type;
uint8_t board_rev_major;
uint8_t board_rev_minor;
uint16_t chip_type;
uint8_t chip_rev_major;
uint8_t chip_rev_minor;
char board_serial_number[OCTOEN_SERIAL_LEN];
uint8_t mac_addr_base[6];
uint8_t mac_addr_count;
uint64_t cvmx_desc_vaddr;
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
} octeon_boot_descriptor_t;
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
static cvmx_bootinfo_t *
octeon_process_app_desc_ver_6(octeon_boot_descriptor_t *app_desc_ptr)
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
{
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
cvmx_bootinfo_t *octeon_bootinfo;
Hook up parsing of the boot records.
2009-12-10 01:45:06 +00:00
/* XXX Why is 0x00000000ffffffffULL a bad value? */
if (app_desc_ptr->cvmx_desc_vaddr == 0 ||
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
app_desc_ptr->cvmx_desc_vaddr == 0xfffffffful) {
cvmx_safe_printf("Bad octeon_bootinfo %#jx\n",
(uintmax_t)app_desc_ptr->cvmx_desc_vaddr);
return (NULL);
}
octeon_bootinfo = cvmx_phys_to_ptr(app_desc_ptr->cvmx_desc_vaddr);
if (octeon_bootinfo->major_version != 1) {
cvmx_safe_printf("Incompatible CVMX descriptor from bootloader: %d.%d %p\n",
(int) octeon_bootinfo->major_version,
(int) octeon_bootinfo->minor_version, octeon_bootinfo);
return (NULL);
}
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
Merge Cavium Octeon SDK 2.0 Simple Executive; this brings some fixes and new facilities as well as support for the Octeon 2 family of SoCs. XXX Note that with our antediluvian assembler, we can't support some Octeon 2 instructions and fall back to using the old ones instead.
2010-11-28 08:18:16 +00:00
cvmx_sysinfo_minimal_initialize(octeon_bootinfo->phy_mem_desc_addr,
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
octeon_bootinfo->board_type,
octeon_bootinfo->board_rev_major,
octeon_bootinfo->board_rev_minor,
octeon_bootinfo->eclock_hz);
Wrap some long lines and display board serial numbers at boot.
2012-10-29 02:10:20 +00:00
memcpy(cvmx_sysinfo_get()->mac_addr_base,
octeon_bootinfo->mac_addr_base, 6);
- Copy base MAC address from bootinfo descriptor to sysinfo struct Reviewed by: Andrew Duane
2011-11-28 19:28:29 +00:00
cvmx_sysinfo_get()->mac_addr_count = octeon_bootinfo->mac_addr_count;
- Set CF physical address base in sysinfo structure
2011-12-23 22:10:55 +00:00
cvmx_sysinfo_get()->compact_flash_common_base_addr =
octeon_bootinfo->compact_flash_common_base_addr;
- Initialize compact_flash_attribute_base_addr from bootinfo structure
2011-12-24 23:15:25 +00:00
cvmx_sysinfo_get()->compact_flash_attribute_base_addr =
octeon_bootinfo->compact_flash_attribute_base_addr;
Unbreak SMP on stock Octeon systems -- copy the core_mask from bootinfo into sysinfo. This should have been done as part of replacing bootinfo with sysinfo.
2012-03-02 20:34:15 +00:00
cvmx_sysinfo_get()->core_mask = octeon_bootinfo->core_mask;
Wrap some long lines and display board serial numbers at boot.
2012-10-29 02:10:20 +00:00
cvmx_sysinfo_get()->led_display_base_addr =
octeon_bootinfo->led_display_base_addr;
memcpy(cvmx_sysinfo_get()->board_serial_number,
octeon_bootinfo->board_serial_number,
sizeof cvmx_sysinfo_get()->board_serial_number);
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
return (octeon_bootinfo);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
}
Hook up parsing of the boot records.
2009-12-10 01:45:06 +00:00
static void
octeon_boot_params_init(register_t ptr)
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
{
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
octeon_boot_descriptor_t *app_desc_ptr;
cvmx_bootinfo_t *octeon_bootinfo;
if (ptr == 0 || ptr >= MAX_APP_DESC_ADDR) {
cvmx_safe_printf("app descriptor passed at invalid address %#jx\n",
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
(uintmax_t)ptr);
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
platform_reset();
}
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
app_desc_ptr = (octeon_boot_descriptor_t *)(intptr_t)ptr;
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
if (app_desc_ptr->desc_version < 6) {
cvmx_safe_printf("Your boot code is too old to be supported.\n");
platform_reset();
}
octeon_bootinfo = octeon_process_app_desc_ver_6(app_desc_ptr);
if (octeon_bootinfo == NULL) {
cvmx_safe_printf("Could not parse boot descriptor.\n");
platform_reset();
}
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
Use Simple Executive LED display routines, which correctly use the LED base address passed from the bootloader, rather than using a hard-coded value. Make FreeBSD announce itself on the LED display similar to other kernels. Remove uses of the previous LED routines, which were under-used and only used in drivers for what seem like debugging purposes, despite those drivers being widely-tested. Remove several inlines for accessing memory that duplicate other functions which are now used instead, as they are now entirely unused.
2012-10-29 00:51:53 +00:00
if (cvmx_sysinfo_get()->led_display_base_addr != 0) {
/*
* Revision 1.x of the EBT3000 only supports 4 characters, but
* other devices support 8.
*/
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBT3000 &&
cvmx_sysinfo_get()->board_rev_major == 1)
ebt3000_str_write("FBSD");
else
ebt3000_str_write("FreeBSD!");
}
o) Do boot descriptor parsing before console setup so that we can use a console other than UART 0 from the outset. o) Print board information from sysinfo after consoles have been initialized rather than doing it during boot descriptor parsing. o) Use cvmx_safe_printf and platform_reset rather than panic when doing very early boot descriptor parsing before the console is set up. o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
if (cvmx_sysinfo_get()->phy_mem_desc_addr == (uint64_t)0) {
cvmx_safe_printf("Your boot loader did not supply a memory descriptor.\n");
platform_reset();
}
Merge Cavium Octeon SDK 2.0 Simple Executive; this brings some fixes and new facilities as well as support for the Octeon 2 family of SoCs. XXX Note that with our antediluvian assembler, we can't support some Octeon 2 instructions and fall back to using the old ones instead.
2010-11-28 08:18:16 +00:00
cvmx_bootmem_init(cvmx_sysinfo_get()->phy_mem_desc_addr);
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
Speed feature tests and initialize helper configuration that some CPUs require.
2012-10-30 06:07:30 +00:00
octeon_feature_init();
__cvmx_helper_cfg_init();
Import Cavium's FreeBSD port, or the Octeon specific pieces, verbatim. Yes, this puts things in the wrong place, doesn't compile and is woefully incomplete. However, it will allow us to more easily track against the upstream sources without needing to import the entire Cavium tree under vendor. This port is based on FreeBSD 7.0 as of April 2007 and the pre-import MIPS tree (aka mips2), so much work is necessary here.
2009-06-14 02:46:07 +00:00
}
o Add support for memory above 256MB on the octeon. o Force the ebase to be 0x80000000 (the base that we're booted with may need to be respected in the future). o Initialize the clock early so we can initialize the console early o use panic where we can now use it. o Tag some code for parsing the boot records as belonging in the cavium sdk. o remove support for booting on ancient boards... # we make it further in bootstrapping now: interrupts being enabled in the # uarts are now taking us out, it seems, for reasons unknown.
2010-01-22 20:40:07 +00:00
/* impEND: This stuff should move back into the Cavium SDK */
Reference in New Issue Copy Permalink