freebsd-skq/sys/dev/en/if_en_pci.c

497 lines
13 KiB
C
Raw Normal View History

1997-05-09 07:48:14 +00:00
/* $NetBSD: if_en_pci.c,v 1.1 1996/06/22 02:00:31 chuck Exp $ */
/*-
1997-05-09 07:48:14 +00:00
* Copyright (c) 1996 Charles D. Cranor and Washington University.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles D. Cranor and
* Washington University.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
1999-05-09 17:12:25 +00:00
*
1997-05-09 07:48:14 +00:00
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1997-05-09 07:48:14 +00:00
/*
* i f _ e n _ p c i . c
*
* author: Chuck Cranor <chuck@ccrc.wustl.edu>
* started: spring, 1996.
*
* FreeBSD PCI glue for the eni155p card.
* thanks to Matt Thomas for figuring out FreeBSD vs NetBSD vs etc.. diffs.
*/
2003-06-11 06:34:30 +00:00
1997-05-09 07:48:14 +00:00
#include <sys/param.h>
#include <sys/kernel.h>
2004-05-30 20:08:47 +00:00
#include <sys/module.h>
1997-05-09 07:48:14 +00:00
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <sys/condvar.h>
1997-05-09 07:48:14 +00:00
2000-11-07 09:31:28 +00:00
#include <sys/bus.h>
#include <machine/bus.h>
2000-11-07 09:31:28 +00:00
#include <sys/rman.h>
#include <machine/resource.h>
1997-05-09 07:48:14 +00:00
#include <vm/uma.h>
1997-05-09 07:48:14 +00:00
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_atm.h>
#include <net/if_media.h>
#include <net/if_types.h>
1997-05-09 07:48:14 +00:00
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
1997-05-09 07:48:14 +00:00
#include <dev/utopia/utopia.h>
1997-05-09 07:48:14 +00:00
#include <dev/en/midwayreg.h>
#include <dev/en/midwayvar.h>
MODULE_DEPEND(en, pci, 1, 1, 1);
MODULE_DEPEND(en, atm, 1, 1, 1);
MODULE_DEPEND(en, utopia, 1, 1, 1);
1997-05-09 07:48:14 +00:00
/*
* local structures
*/
struct en_pci_softc {
/* bus independent stuff */
struct en_softc esc; /* includes "device" structure */
1997-05-09 07:48:14 +00:00
/* freebsd newbus glue */
struct resource *res; /* resource descriptor for registers */
struct resource *irq; /* resource descriptor for interrupt */
void *ih; /* interrupt handle */
1997-05-09 07:48:14 +00:00
};
2002-03-20 02:08:01 +00:00
static void eni_get_macaddr(device_t, struct en_pci_softc *);
static void adp_get_macaddr(struct en_pci_softc *);
1997-05-09 07:48:14 +00:00
/*
* address of config base memory address register in PCI config space
* (this is card specific)
*/
#define PCI_CBMA PCIR_BAR(0)
1997-05-09 07:48:14 +00:00
/*
* tonga (pci bridge). ENI cards only!
*/
#define EN_TONGA 0x60 /* PCI config addr of tonga reg */
#define TONGA_SWAP_DMA 0x80 /* endian swap control */
#define TONGA_SWAP_BYTE 0x40
#define TONGA_SWAP_WORD 0x20
#define TONGA_READ_MULT 0x00
#define TONGA_READ_MEM 0x04
#define TONGA_READ_IVAN 0x08
#define TONGA_READ_KEN 0x0C
1997-05-09 07:48:14 +00:00
/*
* adaptec pci bridge. ADP cards only!
*/
#define ADP_PCIREG 0x050040 /* PCI control register */
#define ADP_PCIREG_RESET 0x1 /* reset card */
#define ADP_PCIREG_IENABLE 0x2 /* interrupt enable */
#define ADP_PCIREG_SWAP_WORD 0x4 /* swap byte on slave access */
#define ADP_PCIREG_SWAP_DMA 0x8 /* swap byte on DMA */
#define PCI_VENDOR_EFFICIENTNETS 0x111a /* Efficent Networks */
#define PCI_PRODUCT_EFFICIENTNETS_ENI155PF 0x0000 /* ENI-155P ATM */
#define PCI_PRODUCT_EFFICIENTNETS_ENI155PA 0x0002 /* ENI-155P ATM */
#define PCI_VENDOR_ADP 0x9004 /* adaptec */
#define PCI_PRODUCT_ADP_AIC5900 0x5900
#define PCI_PRODUCT_ADP_AIC5905 0x5905
#define PCI_VENDOR(x) ((x) & 0xFFFF)
#define PCI_CHIPID(x) (((x) >> 16) & 0xFFFF)
/*
* bus specific reset function [ADP only!]
*/
static void
adp_busreset(void *v)
1997-05-09 07:48:14 +00:00
{
struct en_softc *sc = (struct en_softc *)v;
uint32_t dummy;
bus_space_write_4(sc->en_memt, sc->en_base, ADP_PCIREG,
ADP_PCIREG_RESET);
DELAY(1000); /* let it reset */
dummy = bus_space_read_4(sc->en_memt, sc->en_base, ADP_PCIREG);
bus_space_write_4(sc->en_memt, sc->en_base, ADP_PCIREG,
(ADP_PCIREG_SWAP_DMA | ADP_PCIREG_IENABLE));
dummy = bus_space_read_4(sc->en_memt, sc->en_base, ADP_PCIREG);
if ((dummy & (ADP_PCIREG_SWAP_WORD | ADP_PCIREG_SWAP_DMA)) !=
ADP_PCIREG_SWAP_DMA)
device_printf(sc->dev, "%s: Adaptec ATM did NOT reset!\n",
__func__);
1997-05-09 07:48:14 +00:00
}
/***********************************************************************/
/*
* autoconfig stuff
*/
2000-11-07 09:31:28 +00:00
static int
en_pci_probe(device_t dev)
1997-05-09 07:48:14 +00:00
{
switch (pci_get_vendor(dev)) {
case PCI_VENDOR_EFFICIENTNETS:
switch (pci_get_device(dev)) {
case PCI_PRODUCT_EFFICIENTNETS_ENI155PF:
case PCI_PRODUCT_EFFICIENTNETS_ENI155PA:
device_set_desc(dev, "Efficient Networks ENI-155p");
return (BUS_PROBE_DEFAULT);
}
break;
case PCI_VENDOR_ADP:
switch (pci_get_device(dev)) {
case PCI_PRODUCT_ADP_AIC5900:
case PCI_PRODUCT_ADP_AIC5905:
device_set_desc(dev, "Adaptec 155 ATM");
return (BUS_PROBE_DEFAULT);
}
break;
}
return (ENXIO);
1997-05-09 07:48:14 +00:00
}
2000-11-07 09:31:28 +00:00
static int
en_pci_attach(device_t dev)
1997-05-09 07:48:14 +00:00
{
struct en_softc *sc;
struct en_pci_softc *scp;
int rid, error = 0;
sc = device_get_softc(dev);
scp = (struct en_pci_softc *)sc;
sc->dev = dev;
sc->ifp = if_alloc(IFT_ATM);
if (sc->ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
error = ENOSPC;
goto fail;
}
if_initname(sc->ifp, device_get_name(dev),
device_get_unit(dev));
/*
* Enable bus mastering.
*/
pci_enable_busmaster(dev);
/*
* Map control/status registers.
*/
rid = PCI_CBMA;
scp->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (scp->res == NULL) {
device_printf(dev, "could not map memory\n");
if_free(sc->ifp);
error = ENXIO;
goto fail;
}
sc->en_memt = rman_get_bustag(scp->res);
sc->en_base = rman_get_bushandle(scp->res);
/*
* Allocate our interrupt.
*/
rid = 0;
scp->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (scp->irq == NULL) {
device_printf(dev, "could not map interrupt\n");
bus_release_resource(dev, SYS_RES_MEMORY, PCI_CBMA, scp->res);
if_free(sc->ifp);
error = ENXIO;
goto fail;
}
sc->ipl = 1; /* XXX (required to enable interrupt on midway) */
/* figure out if we are an adaptec card or not */
sc->is_adaptec = (pci_get_vendor(dev) == PCI_VENDOR_ADP) ? 1 : 0;
/*
* set up pci bridge
*/
if (sc->is_adaptec) {
adp_get_macaddr(scp);
sc->en_busreset = adp_busreset;
adp_busreset(sc);
} else {
eni_get_macaddr(dev, scp);
sc->en_busreset = NULL;
pci_write_config(dev, EN_TONGA, TONGA_SWAP_DMA | TONGA_READ_IVAN, 4);
}
/*
* Common attach stuff
*/
if ((error = en_attach(sc)) != 0) {
device_printf(dev, "attach failed\n");
bus_teardown_intr(dev, scp->irq, scp->ih);
bus_release_resource(dev, SYS_RES_IRQ, 0, scp->irq);
bus_release_resource(dev, SYS_RES_MEMORY, PCI_CBMA, scp->res);
if_free(sc->ifp);
goto fail;
}
/*
* Do the interrupt SETUP last just before returning
*/
error = bus_setup_intr(dev, scp->irq, INTR_TYPE_NET,
NULL, en_intr, sc, &scp->ih);
if (error) {
en_reset(sc);
atm_ifdetach(sc->ifp);
device_printf(dev, "could not setup irq\n");
bus_release_resource(dev, SYS_RES_IRQ, 0, scp->irq);
bus_release_resource(dev, SYS_RES_MEMORY, PCI_CBMA, scp->res);
en_destroy(sc);
if_free(sc->ifp);
goto fail;
}
return (0);
fail:
return (error);
2000-11-07 09:31:28 +00:00
}
/*
* Detach the adapter
*/
2000-11-07 09:31:28 +00:00
static int
en_pci_detach(device_t dev)
{
struct en_softc *sc = device_get_softc(dev);
struct en_pci_softc *scp = (struct en_pci_softc *)sc;
/*
* Stop DMA and drop transmit queue.
2000-11-07 09:31:28 +00:00
*/
if ((sc->ifp->if_drv_flags & IFF_DRV_RUNNING)) {
device_printf(sc->dev, "still running\n");
sc->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
}
2000-11-07 09:31:28 +00:00
/*
* Close down routes etc.
2000-11-07 09:31:28 +00:00
*/
en_reset(sc);
atm_ifdetach(sc->ifp);
2000-11-07 09:31:28 +00:00
/*
* Deallocate resources.
*/
bus_teardown_intr(dev, scp->irq, scp->ih);
bus_release_resource(dev, SYS_RES_IRQ, 0, scp->irq);
bus_release_resource(dev, SYS_RES_MEMORY, PCI_CBMA, scp->res);
/*
* Free all the driver internal resources
*/
en_destroy(sc);
if_free(sc->ifp);
2000-11-07 09:31:28 +00:00
return (0);
1997-05-09 07:48:14 +00:00
}
2000-11-07 09:31:28 +00:00
static int
en_pci_shutdown(device_t dev)
1997-05-09 07:48:14 +00:00
{
struct en_pci_softc *psc = device_get_softc(dev);
1997-05-09 07:48:14 +00:00
en_reset(&psc->esc);
DELAY(10); /* is this necessary? */
return (0);
}
/*
* Get the MAC address from an Adaptec board. No idea how to get
* serial number or other stuff, because I have no documentation for that
* card.
*/
static void
adp_get_macaddr(struct en_pci_softc *scp)
{
struct en_softc * sc = (struct en_softc *)scp;
int lcv;
for (lcv = 0; lcv < sizeof(IFP2IFATM(sc->ifp)->mib.esi); lcv++)
IFP2IFATM(sc->ifp)->mib.esi[lcv] = bus_space_read_1(sc->en_memt,
sc->en_base, MID_ADPMACOFF + lcv);
}
/*
* Read station (MAC) address from serial EEPROM.
* derived from linux drivers/atm/eni.c by Werner Almesberger, EPFL LRC.
*/
#define EN_PROM_MAGIC 0x0c
#define EN_PROM_DATA 0x02
#define EN_PROM_CLK 0x01
#define EN_ESI 64
#define EN_SERIAL 112
/*
* Read a byte from the given address in the EEPROM
*/
static uint8_t
eni_get_byte(device_t dev, uint32_t *data, u_int address)
{
int j;
uint8_t tmp;
address = (address << 1) + 1;
/* start operation */
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data &= ~EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data &= ~EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
/* send address with serial line */
for ( j = 7 ; j >= 0 ; j --) {
*data = ((address >> j) & 1) ? (*data | EN_PROM_DATA) :
(*data & ~EN_PROM_DATA);
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data &= ~EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
}
/* get ack */
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data = pci_read_config(dev, EN_TONGA, 4);
*data &= ~EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
tmp = 0;
for ( j = 7 ; j >= 0 ; j --) {
tmp <<= 1;
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data = pci_read_config(dev, EN_TONGA, 4);
if(*data & EN_PROM_DATA) tmp |= 1;
*data &= ~EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
}
/* get ack */
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data = pci_read_config(dev, EN_TONGA, 4);
*data &= ~EN_PROM_CLK ;
pci_write_config(dev, EN_TONGA, *data, 4);
*data |= EN_PROM_DATA ;
pci_write_config(dev, EN_TONGA, *data, 4);
return (tmp);
}
/*
* Get MAC address and other stuff from the EEPROM
*/
static void
2000-11-07 09:31:28 +00:00
eni_get_macaddr(device_t dev, struct en_pci_softc *scp)
1997-05-09 07:48:14 +00:00
{
struct en_softc * sc = (struct en_softc *)scp;
int i;
uint32_t data, t_data;
t_data = pci_read_config(dev, EN_TONGA, 4) & 0xffffff00;
data = EN_PROM_MAGIC | EN_PROM_DATA | EN_PROM_CLK;
pci_write_config(dev, EN_TONGA, data, 4);
for (i = 0; i < sizeof(IFP2IFATM(sc->ifp)->mib.esi); i ++)
IFP2IFATM(sc->ifp)->mib.esi[i] = eni_get_byte(dev, &data, i + EN_ESI);
IFP2IFATM(sc->ifp)->mib.serial = 0;
for (i = 0; i < 4; i++) {
IFP2IFATM(sc->ifp)->mib.serial <<= 8;
IFP2IFATM(sc->ifp)->mib.serial |= eni_get_byte(dev, &data, i + EN_SERIAL);
}
/* stop operation */
data &= ~EN_PROM_DATA;
pci_write_config(dev, EN_TONGA, data, 4);
data |= EN_PROM_CLK;
pci_write_config(dev, EN_TONGA, data, 4);
data |= EN_PROM_DATA;
pci_write_config(dev, EN_TONGA, data, 4);
pci_write_config(dev, EN_TONGA, t_data, 4);
1997-05-09 07:48:14 +00:00
}
/*
* Driver infrastructure
*/
2000-11-07 09:31:28 +00:00
static device_method_t en_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, en_pci_probe),
DEVMETHOD(device_attach, en_pci_attach),
DEVMETHOD(device_detach, en_pci_detach),
DEVMETHOD(device_shutdown, en_pci_shutdown),
{ 0, 0 }
};
static driver_t en_driver = {
"en",
en_methods,
sizeof(struct en_pci_softc),
};
static devclass_t en_devclass;
DRIVER_MODULE(en, pci, en_driver, en_devclass, en_modevent, 0);