d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
63d0be9051
freebsd-skq/sys/dev/ata/ata-all.c

997 lines
26 KiB
C
Raw Normal View History

Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
/*-
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
* Copyright (c) 1998 - 2004 S<EFBFBD>ren Schmidt <sos@FreeBSD.org>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add support for the HPT366 chip, this is used on the Abit boards and their HotRod controller and on SIIG PCI ultra DMA controller. These changes also made lots of the Promise code go away, its all much more generic this way. Get rid of atapi_immed_cmd, instead use the queue to move atapi commands from interrupt context if nessesary, the entire atapi layer has gotten an overhaul. Lots of fixes to utililize the new features in subr_disk.c etc, and get rid of the last biots of softc arrays in the drivers, the only one left is atadevices which cannot easily go away (yet). Use our own malloc names, its a lot easier to track memory usage this way. General cleanup overall.
1999-10-09 19:57:13 +00:00
#include "opt_ata.h"
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
#include <sys/ata.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <sys/kernel.h>
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#include <sys/endian.h>
Dont store ata_params for devices that return a bogus ident string.
2003-10-10 11:00:06 +00:00
#include <sys/ctype.h>
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
#include <sys/conf.h>
Update to use the new-bus framework. No functional changes. Mostly done by Doug Rabson, minor fixes by me.
1999-04-18 20:48:15 +00:00
#include <sys/bus.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <sys/malloc.h>
Add sysctl oid hw.atamodes to set the transfermodes online.
2000-01-27 19:00:51 +00:00
#include <sys/sysctl.h>
Use UMA instead of plain malloc for getting ATA request storage. This gives +10% performance on simple tests, so definitly worth it. A few percent more could be had by not using M_ZERO'd alloc's, but we then need to clear fields all over the place to be safe, and that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
#include <sys/sema.h>
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#include <sys/taskqueue.h>
Use UMA instead of plain malloc for getting ATA request storage. This gives +10% performance on simple tests, so definitly worth it. A few percent more could be had by not using M_ZERO'd alloc's, but we then need to clear fields all over the place to be safe, and that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
#include <vm/uma.h>
General cleanup. Dont be so verbose in the probe, only ONE line printed now, to get more info boot verbose. Centralise most printf's in ata-all & ata-dma to use the ata_printf function, it saves alot of codelines. Repeat the identify command if drive fails the first. Protect the timeout functions with splbio. Dont update the transfer details before we are sure the transfer succeded, this way they are proberly retried on errors. Move the handling of next_writeable to userland. Use the READ_CD command to read CD's. That enables us to read _anything_ via the normal read/write interface. This kindof obsoletes the READAUDIO ioctl, but we keep that for now.
2000-01-24 20:45:24 +00:00
#include <machine/stdarg.h>
Update to use the new-bus framework. No functional changes. Mostly done by Doug Rabson, minor fixes by me.
1999-04-18 20:48:15 +00:00
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
#ifdef __alpha__
#include <machine/md_var.h>
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
#endif
Use bioq_flush() to drain a bio queue with a specific error code. Retain the mistake of not updating the devstat API for now. Spell bioq_disksort() consistently with the remaining bioq_*(). #include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
#include <geom/geom_disk.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
#include <dev/ata/ata-all.h>
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
#include <dev/ata/ata-disk.h>
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
#include <dev/ata/ata-raid.h>
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
/* device structures */
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static d_ioctl_t ata_ioctl;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
static struct cdevsw ata_cdevsw = {
Device megapatch 4/6: Introduce d_version field in struct cdevsw, this must always be initialized to D_VERSION. Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
.d_ioctl = ata_ioctl,
Gigacommit to improve device-driver source compatibility between branches: Initialize struct cdevsw using C99 sparse initializtion and remove all initializations to default values. This patch is automatically generated and has been tested by compiling LINT with all the fields in struct cdevsw in reverse order on alpha, sparc64 and i386. Approved by: re(scottl)
2003-03-03 12:15:54 +00:00
.d_name = "ata",
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
};
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
/* prototypes */
Unify prototypes. Cosmetics.
2003-08-25 09:01:49 +00:00
static void ata_shutdown(void *, int);
static int ata_getparam(struct ata_device *, u_int8_t);
static void ata_identify_devices(struct ata_channel *);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
static void ata_boot_attach(void);
Unify prototypes. Cosmetics.
2003-08-25 09:01:49 +00:00
static void bswap(int8_t *, int);
static void btrim(int8_t *, int);
static void bpack(int8_t *, int8_t *, int);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static void ata_init(void);
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
/* global vars */
Fix ata-card. The altio resource magic no longer worked probably due to other changes in the kernel. Redo that part so it also fits better into ATAng. Fix detach so it doesn't panic the system when a pccard device is yanked. Approved by: re@
2003-11-30 16:27:59 +00:00
MALLOC_DEFINE(M_ATA, "ATA generic", "ATA driver generic layer");
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
devclass_t ata_devclass;
Use UMA instead of plain malloc for getting ATA request storage. This gives +10% performance on simple tests, so definitly worth it. A few percent more could be had by not using M_ZERO'd alloc's, but we then need to clear fields all over the place to be safe, and that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
uma_zone_t ata_zone;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
int ata_wc = 1;
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
/* local vars */
Release the hold on ata_delayed_attach earlier so we can use tsleep in the boot probe as well. Suggested by: gibbs
2004-09-09 13:25:46 +00:00
static struct intr_config_hook *ata_delayed_attach = NULL;
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
static int ata_dma = 1;
Change the default to switch on DMA on ATAPI devices if they can do UDMA2 (ATA33) mode and beyond.
2004-08-01 12:31:38 +00:00
static int atapi_dma = 1;
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
/* sysctl vars */
SYSCTL_NODE(_hw, OID_AUTO, ata, CTLFLAG_RD, 0, "ATA driver parameters");
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
TUNABLE_INT("hw.ata.ata_dma", &ata_dma);
Move sysctl declarations next to the corresponding tunable declarations. Add a sysctl declaration for hw.ata.atapi_dma, which had gone MIA (though setting it in loader.conf still worked, it was not visible at runtime) Approved by: sos
2003-11-03 09:25:02 +00:00
SYSCTL_INT(_hw_ata, OID_AUTO, ata_dma, CTLFLAG_RDTUN, &ata_dma, 0,
"ATA disk DMA mode control");
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
TUNABLE_INT("hw.ata.wc", &ata_wc);
Move sysctl declarations next to the corresponding tunable declarations. Add a sysctl declaration for hw.ata.atapi_dma, which had gone MIA (though setting it in loader.conf still worked, it was not visible at runtime) Approved by: sos
2003-11-03 09:25:02 +00:00
SYSCTL_INT(_hw_ata, OID_AUTO, wc, CTLFLAG_RDTUN, &ata_wc, 0,
"ATA disk write caching");
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
TUNABLE_INT("hw.ata.atapi_dma", &atapi_dma);
Move sysctl declarations next to the corresponding tunable declarations. Add a sysctl declaration for hw.ata.atapi_dma, which had gone MIA (though setting it in loader.conf still worked, it was not visible at runtime) Approved by: sos
2003-11-03 09:25:02 +00:00
SYSCTL_INT(_hw_ata, OID_AUTO, atapi_dma, CTLFLAG_RDTUN, &atapi_dma, 0,
"ATAPI device DMA mode control");
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/*
* newbus device interface related functions
*/
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
int
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
ata_probe(device_t dev)
{
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
struct ata_channel *ch;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
if (!dev || !(ch = device_get_softc(dev)))
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
return ENXIO;
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
Second round of updates to the ATA driver. Clean up the DMA interface too much unneeded stuff crept in with the busdma code back when. Modify the ATA_IN* / ATA_OUT* macros so that resource and offset are gotten from a table. That allows for new chipsets that doesn't nessesarily have things ordered the good old way. This also removes the need for the wierd PC98 resource functions. Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
if (ch->r_irq)
Add sysctls for reading the tunables as suggested by des. Minor cleanups plus checks of the ->active state. Cosmetics.
2001-03-19 08:04:54 +00:00
return EEXIST;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Change the order of ata_dmainit/ata_allocate in preparation of supporting new chipsets where this is needed.
2004-08-12 08:20:36 +00:00
return 0;
}
int
ata_attach(device_t dev)
{
struct ata_channel *ch;
int error, rid;
if (!dev || !(ch = device_get_softc(dev)))
return ENXIO;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
/* initialize the softc basics */
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ch->device[MASTER].channel = ch;
ch->device[MASTER].unit = ATA_MASTER;
ch->device[MASTER].mode = ATA_PIO;
ch->device[SLAVE].channel = ch;
ch->device[SLAVE].unit = ATA_SLAVE;
ch->device[SLAVE].mode = ATA_PIO;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->dev = dev;
Spring cleanup of macros
2004-04-30 16:21:34 +00:00
ch->lock = ATA_IDLE;
Second round of updates to the ATA driver. Clean up the DMA interface too much unneeded stuff crept in with the busdma code back when. Modify the ATA_IN* / ATA_OUT* macros so that resource and offset are gotten from a table. That allows for new chipsets that doesn't nessesarily have things ordered the good old way. This also removes the need for the wierd PC98 resource functions. Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
/* initialise device(s) on this channel */
ch->locking(ch, ATA_LF_LOCK);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->hw.reset(ch);
Second round of updates to the ATA driver. Clean up the DMA interface too much unneeded stuff crept in with the busdma code back when. Modify the ATA_IN* / ATA_OUT* macros so that resource and offset are gotten from a table. That allows for new chipsets that doesn't nessesarily have things ordered the good old way. This also removes the need for the wierd PC98 resource functions. Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
ch->locking(ch, ATA_LF_UNLOCK);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
Introduce busspace instead of the good old in/out instructions. Not pretty but it works (I hope)...
2001-02-06 16:44:25 +00:00
rid = ATA_IRQ_RID;
Convert callers to the new bus_alloc_resource_any(9) API. Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
2004-03-17 17:50:55 +00:00
ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
if (!ch->r_irq) {
ata_printf(ch, -1, "unable to allocate interrupt\n");
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
return ENXIO;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if ((error = bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS,
ch->hw.interrupt, ch, &ch->ih))) {
Major update of the ATA RAID code, part 3: Add code to properly detach/attach disks that are part of a RAID. Mark a disk that is attached on an ATA channel belonging to a RAID as a spare disk that can be used for rebuilding failed RAID1's. Add support for rebuilding failed RAID1's. Several fixes to the detach/attach code. For replacing a disk in a failed RAID1 do the following: Find the controller channel# of the failed disk. Exec 'atacontrol detach <channel#>' to free the disk from the system. Replace the failed disk with a new one of at least the same size. If your have your disks in drawers/enclosures this can be done with the system still running. Exec 'atacontrol attach <channel#>' to add the disk to the system and mark it as a valid spare for rebuild. Exec 'atacontrol rebuild <array#>' The system will rebuild the array on the fly, the array can still be used during this, although with slower performance. Please let me know of any problems with this! Sponsored by: Advanis Inc. MFC after: 2 weeks
2002-03-03 15:36:21 +00:00
ata_printf(ch, -1, "unable to setup interrupt\n");
Add (partial) support for the Cypress ATA controller. Call intr_teardown on detach. Always add non masterdevice from unit 2 upwards. Update to the pccard code, at least some cards are now working, more testing to follow.
2000-02-25 09:48:23 +00:00
return error;
Major update of the ATA RAID code, part 3: Add code to properly detach/attach disks that are part of a RAID. Mark a disk that is attached on an ATA channel belonging to a RAID as a spare disk that can be used for rebuilding failed RAID1's. Add support for rebuilding failed RAID1's. Several fixes to the detach/attach code. For replacing a disk in a failed RAID1 do the following: Find the controller channel# of the failed disk. Exec 'atacontrol detach <channel#>' to free the disk from the system. Replace the failed disk with a new one of at least the same size. If your have your disks in drawers/enclosures this can be done with the system still running. Exec 'atacontrol attach <channel#>' to add the disk to the system and mark it as a valid spare for rebuild. Exec 'atacontrol rebuild <array#>' The system will rebuild the array on the fly, the array can still be used during this, although with slower performance. Please let me know of any problems with this! Sponsored by: Advanis Inc. MFC after: 2 weeks
2002-03-03 15:36:21 +00:00
}
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
Remember to mtx_destroy mutexes.
2004-03-01 13:17:07 +00:00
/* initialize queue and associated lock */
bzero(&ch->queue_mtx, sizeof(struct mtx));
Use the right ordering of args on mtx_init(). No functional changes since the args in question was all zero's. Found by: Jimmy Olgeni <olgeni@FreeBSD.org>
2004-06-22 11:18:25 +00:00
mtx_init(&ch->queue_mtx, "ATA queue lock", NULL, MTX_DEF);
Remember to mtx_destroy mutexes.
2004-03-01 13:17:07 +00:00
TAILQ_INIT(&ch->ata_queue);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* do not attach devices if we are in early boot */
if (ata_delayed_attach)
return 0;
ata_identify_devices(ch);
if (ch->device[MASTER].attach)
ch->device[MASTER].attach(&ch->device[MASTER]);
if (ch->device[SLAVE].attach)
ch->device[SLAVE].attach(&ch->device[SLAVE]);
Add the ability to use ATAPI devices via CAM. The CAM<>ATAPI layer was submitted by "Thomas Quinot <thomas@cuivre.fr.eu.org>" changes form the version on the net by me (formatting, ability to be used alone without the ATAPI native device driver, proper speed reporting...) See /sys/conf/NOTES for usage. Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
2002-08-09 20:54:06 +00:00
#ifdef DEV_ATAPICAM
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
atapi_cam_attach_bus(ch);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
#endif
return 0;
}
Split out the ata probes in seperate files for each bus type.
2001-03-06 21:43:46 +00:00
int
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
ata_detach(device_t dev)
{
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
struct ata_channel *ch;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
Second round of updates to the ATA driver. Clean up the DMA interface too much unneeded stuff crept in with the busdma code back when. Modify the ATA_IN* / ATA_OUT* macros so that resource and offset are gotten from a table. That allows for new chipsets that doesn't nessesarily have things ordered the good old way. This also removes the need for the wierd PC98 resource functions. Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
if (!dev || !(ch = device_get_softc(dev)) || !ch->r_irq)
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
return ENXIO;
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
Attempt to handle suspend/resume better.
2004-07-12 10:50:50 +00:00
/* mark devices on this channel as detaching */
ch->device[MASTER].flags |= ATA_D_DETACHING;
ch->device[SLAVE].flags |= ATA_D_DETACHING;
/* fail outstanding requests on this channel */
ata_fail_requests(ch, NULL);
Close a race in ata_reinit().
2004-08-09 12:02:32 +00:00
/* unlock the channel */
ATA_UNLOCK_CH(ch);
ch->locking(ch, ATA_LF_UNLOCK);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* detach devices on this channel */
if (ch->device[MASTER].detach)
ch->device[MASTER].detach(&ch->device[MASTER]);
if (ch->device[SLAVE].detach)
ch->device[SLAVE].detach(&ch->device[SLAVE]);
Add the ability to use ATAPI devices via CAM. The CAM<>ATAPI layer was submitted by "Thomas Quinot <thomas@cuivre.fr.eu.org>" changes form the version on the net by me (formatting, ability to be used alone without the ATAPI native device driver, proper speed reporting...) See /sys/conf/NOTES for usage. Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
2002-08-09 20:54:06 +00:00
#ifdef DEV_ATAPICAM
Fill in missing parts of the ATAPI/CAM XPT: implement XPT_RESET_BUS and XPT_RESET_DEV. In order to properly handle reset requests whether they originate in the ATA layer (atacontrol reinit) or from the CAM layer (camcontrol reset) ata_reinit does not cause the SIM to be deallocated anymore. The SIM is now unconditionnally created for each ATAPI bus. This change may cause existing bus ids to change on some setups. Reviewed by: roberto Approved by: sos
2002-10-22 20:18:51 +00:00
atapi_cam_detach_bus(ch);
Quantify the calls to ad_attach and atapi_attach so that diskless or atapiless kernels can be built.
2000-01-19 07:25:46 +00:00
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
/* flush cache and powerdown device */
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
if (ch->device[MASTER].param) {
Only call FLUSH_CACHE on devices that say they can. This will get rid of the warnings issued at shutdown (that seems to worry alot of users), but will also no flush cache on lots of devices that can, but doesn't set the right support bits...
2003-08-25 07:59:50 +00:00
if (ch->device[MASTER].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
ata_controlcmd(&ch->device[MASTER], ATA_FLUSHCACHE, 0, 0, 0);
Put devices into sleep mode (ie spin down) on detach.
2003-10-12 12:37:11 +00:00
ata_controlcmd(&ch->device[MASTER], ATA_SLEEP, 0, 0, 0);
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
free(ch->device[MASTER].param, M_ATA);
ch->device[MASTER].param = NULL;
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
}
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
if (ch->device[SLAVE].param) {
Only call FLUSH_CACHE on devices that say they can. This will get rid of the warnings issued at shutdown (that seems to worry alot of users), but will also no flush cache on lots of devices that can, but doesn't set the right support bits...
2003-08-25 07:59:50 +00:00
if (ch->device[SLAVE].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
ata_controlcmd(&ch->device[SLAVE], ATA_FLUSHCACHE, 0, 0, 0);
Put devices into sleep mode (ie spin down) on detach.
2003-10-12 12:37:11 +00:00
ata_controlcmd(&ch->device[SLAVE], ATA_SLEEP, 0, 0, 0);
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
free(ch->device[SLAVE].param, M_ATA);
ch->device[SLAVE].param = NULL;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
}
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ch->device[MASTER].mode = ATA_PIO;
ch->device[SLAVE].mode = ATA_PIO;
ch->devices = 0;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
bus_teardown_intr(dev, ch->r_irq, ch->ih);
bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
ch->r_irq = NULL;
Remember to mtx_destroy mutexes.
2004-03-01 13:17:07 +00:00
mtx_destroy(&ch->queue_mtx);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
return 0;
}
int
ata_reinit(struct ata_channel *ch)
{
int devices, misdev, newdev;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (!ch->r_irq)
return ENXIO;
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
if (bootverbose)
ata_printf(ch, -1, "reiniting channel ..\n");
Fix the handling of "inflight" requests when doing reinit's. Add missing untimeout that would get lost in handling of some error situations, and caused what looked like random timeouts afterwards when the timeout fired.
2004-08-27 14:48:32 +00:00
Spring cleanup of macros
2004-04-30 16:21:34 +00:00
ATA_FORCELOCK_CH(ch);
Fix the handling of "inflight" requests when doing reinit's. Add missing untimeout that would get lost in handling of some error situations, and caused what looked like random timeouts afterwards when the timeout fired.
2004-08-27 14:48:32 +00:00
ata_catch_inflight(ch);
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
ch->flags |= ATA_IMMEDIATE_MODE;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
devices = ch->devices;
Fix the handling of "inflight" requests when doing reinit's. Add missing untimeout that would get lost in handling of some error situations, and caused what looked like random timeouts afterwards when the timeout fired.
2004-08-27 14:48:32 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->hw.reset(ch);
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
if (bootverbose)
ata_printf(ch, -1, "resetting done ..\n");
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* detach what left the channel during reset */
if ((misdev = devices & ~ch->devices)) {
if ((misdev & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) &&
In case we loose a device during reset in reinit() finish off the request with error instead of loosing it.
2003-10-07 13:44:15 +00:00
ch->device[MASTER].detach) {
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->device[MASTER].detach(&ch->device[MASTER]);
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
ata_fail_requests(ch, &ch->device[MASTER]);
free(ch->device[MASTER].param, M_ATA);
ch->device[MASTER].param = NULL;
In case we loose a device during reset in reinit() finish off the request with error instead of loosing it.
2003-10-07 13:44:15 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if ((misdev & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) &&
In case we loose a device during reset in reinit() finish off the request with error instead of loosing it.
2003-10-07 13:44:15 +00:00
ch->device[SLAVE].detach) {
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->device[SLAVE].detach(&ch->device[SLAVE]);
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
ata_fail_requests(ch, &ch->device[SLAVE]);
free(ch->device[SLAVE].param, M_ATA);
ch->device[SLAVE].param = NULL;
In case we loose a device during reset in reinit() finish off the request with error instead of loosing it.
2003-10-07 13:44:15 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
Close a race in ata_reinit().
2004-08-09 12:02:32 +00:00
/* unlock the channel */
Try to narrow down the race window on HW that does not have ways to poll for which channel actually pulled the irq line.
2004-08-05 21:13:41 +00:00
ATA_UNLOCK_CH(ch);
Close a race in ata_reinit().
2004-08-09 12:02:32 +00:00
ch->locking(ch, ATA_LF_UNLOCK);
Try to narrow down the race window on HW that does not have ways to poll for which channel actually pulled the irq line.
2004-08-05 21:13:41 +00:00
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
/* identify what is present on the channel now */
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_identify_devices(ch);
/* attach new devices that appeared during reset */
if ((newdev = ~devices & ch->devices)) {
if ((newdev & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) &&
ch->device[MASTER].attach)
ch->device[MASTER].attach(&ch->device[MASTER]);
if ((newdev & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) &&
ch->device[SLAVE].attach)
ch->device[SLAVE].attach(&ch->device[SLAVE]);
}
Restore transfermode on devices after reinit.
2003-10-10 11:03:27 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATAPICAM
atapi_cam_reinit_bus(ch);
#endif
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
if (bootverbose)
ata_printf(ch, -1, "device config done ..\n");
ch->flags &= ~ATA_IMMEDIATE_MODE;
ata_start(ch);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
return 0;
}
Grap the ATA lock on all channels before suspend, this makes certain that we have no outstanding ops in transit, which would cause problems on resume.
2003-05-04 09:34:14 +00:00
int
ata_suspend(device_t dev)
{
struct ata_channel *ch;
if (!dev || !(ch = device_get_softc(dev)))
return ENXIO;
Change the order of ata_dmainit/ata_allocate in preparation of supporting new chipsets where this is needed.
2004-08-12 08:20:36 +00:00
Grap the ATA lock on all channels before suspend, this makes certain that we have no outstanding ops in transit, which would cause problems on resume.
2003-05-04 09:34:14 +00:00
ch->locking(ch, ATA_LF_LOCK);
Spring cleanup of macros
2004-04-30 16:21:34 +00:00
ATA_SLEEPLOCK_CH(ch);
Grap the ATA lock on all channels before suspend, this makes certain that we have no outstanding ops in transit, which would cause problems on resume.
2003-05-04 09:34:14 +00:00
return 0;
}
Split out the ata probes in seperate files for each bus type.
2001-03-06 21:43:46 +00:00
int
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
ata_resume(device_t dev)
{
Add support for the PC98 platform to the ATA driver. This mostly consists of functionality to serialize accesses to the two ATA channels (which can also be used to "fix" certain PCI based controllers). Add support for Acard controllers. Enable the ATA driver in PC98 GENERIC, and add device hints. Update man page with latest support. The PC98 core team has kindly provided me with a PC98 machine that made this all possible, thanks to all that contributed to that effort, without that this would probably newer have been possible.. Approved by: re@
2002-12-03 20:20:44 +00:00
struct ata_channel *ch;
int error;
if (!dev || !(ch = device_get_softc(dev)))
return ENXIO;
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
ch->locking(ch, ATA_LF_LOCK);
Add support for the PC98 platform to the ATA driver. This mostly consists of functionality to serialize accesses to the two ATA channels (which can also be used to "fix" certain PCI based controllers). Add support for Acard controllers. Enable the ATA driver in PC98 GENERIC, and add device hints. Update man page with latest support. The PC98 core team has kindly provided me with a PC98 machine that made this all possible, thanks to all that contributed to that effort, without that this would probably newer have been possible.. Approved by: re@
2002-12-03 20:20:44 +00:00
error = ata_reinit(ch);
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
ch->locking(ch, ATA_LF_UNLOCK);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_start(ch);
Add support for the PC98 platform to the ATA driver. This mostly consists of functionality to serialize accesses to the two ATA channels (which can also be used to "fix" certain PCI based controllers). Add support for Acard controllers. Enable the ATA driver in PC98 GENERIC, and add device hints. Update man page with latest support. The PC98 core team has kindly provided me with a PC98 machine that made this all possible, thanks to all that contributed to that effort, without that this would probably newer have been possible.. Approved by: re@
2002-12-03 20:20:44 +00:00
return error;
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static void
ata_shutdown(void *arg, int howto)
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
{
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
struct ata_channel *ch;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
int ctlr;
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/* flush cache on all devices */
for (ctlr = 0; ctlr < devclass_get_maxunit(ata_devclass); ctlr++) {
if (!(ch = devclass_get_softc(ata_devclass, ctlr)))
continue;
Only call FLUSH_CACHE on devices that say they can. This will get rid of the warnings issued at shutdown (that seems to worry alot of users), but will also no flush cache on lots of devices that can, but doesn't set the right support bits...
2003-08-25 07:59:50 +00:00
if (ch->device[MASTER].param &&
ch->device[MASTER].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_controlcmd(&ch->device[MASTER], ATA_FLUSHCACHE, 0, 0, 0);
Only call FLUSH_CACHE on devices that say they can. This will get rid of the warnings issued at shutdown (that seems to worry alot of users), but will also no flush cache on lots of devices that can, but doesn't set the right support bits...
2003-08-25 07:59:50 +00:00
if (ch->device[SLAVE].param &&
ch->device[SLAVE].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_controlcmd(&ch->device[SLAVE], ATA_FLUSHCACHE, 0, 0, 0);
- Add a new ioctl to get the maximum number of ATA channels. - Use it in atacontrol(8) when listing ATA devices instead of stopping at the first ENXIO received. This makes atacontrol list work on my sparc64 where the two ATA channels I have are numbered 2 and 3. Reviewed by: sos
2003-03-22 12:18:20 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
}
- Add a new ioctl to get the maximum number of ATA channels. - Use it in atacontrol(8) when listing ATA devices instead of stopping at the first ENXIO received. This makes atacontrol list work on my sparc64 where the two ATA channels I have are numbered 2 and 3. Reviewed by: sos
2003-03-22 12:18:20 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/*
* device related interfaces
*/
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
ata_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, int32_t flag, struct thread *td)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
{
struct ata_cmd *iocmd = (struct ata_cmd *)addr;
device_t device = devclass_get_device(ata_devclass, iocmd->channel);
struct ata_channel *ch;
struct ata_device *atadev;
struct ata_request *request;
caddr_t buf;
int error = ENOTTY;
Update to use the changed ioctl interface.
2001-05-17 10:29:30 +00:00
make sure that ioctl's to ata use the proper cmd IOCATA... Reviewed by: sos
2004-08-09 06:47:53 +00:00
if (cmd != IOCATA)
return error;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
DROP_GIANT();
Update to use the changed ioctl interface.
2001-05-17 10:29:30 +00:00
switch (iocmd->cmd) {
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATAGMAXCHANNEL:
iocmd->u.maxchan = devclass_get_maxunit(ata_devclass);
error = 0;
break;
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATAGPARM:
if (!device || !(ch = device_get_softc(device))) {
error = ENXIO;
break;
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
iocmd->u.param.type[MASTER] =
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->devices & (ATA_ATA_MASTER | ATA_ATAPI_MASTER);
iocmd->u.param.type[SLAVE] =
ch->devices & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE);
if (ch->device[MASTER].name)
strcpy(iocmd->u.param.name[MASTER], ch->device[MASTER].name);
if (ch->device[SLAVE].name)
strcpy(iocmd->u.param.name[SLAVE], ch->device[SLAVE].name);
if (ch->device[MASTER].param)
bcopy(ch->device[MASTER].param, &iocmd->u.param.params[MASTER],
sizeof(struct ata_params));
if (ch->device[SLAVE].param)
bcopy(ch->device[SLAVE].param, &iocmd->u.param.params[SLAVE],
sizeof(struct ata_params));
error = 0;
break;
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATAGMODE:
if (!device || !(ch = device_get_softc(device))) {
error = ENXIO;
break;
}
iocmd->u.mode.mode[MASTER] = ch->device[MASTER].mode;
iocmd->u.mode.mode[SLAVE] = ch->device[SLAVE].mode;
error = 0;
break;
Add get-status to the ATA RAID subsystem.
2002-04-02 13:48:17 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATASMODE:
if (!device || !(ch = device_get_softc(device))) {
error = ENXIO;
break;
}
if (iocmd->u.mode.mode[MASTER] >= 0 && ch->device[MASTER].param)
ch->device[MASTER].setmode(&ch->device[MASTER],
iocmd->u.mode.mode[MASTER]);
iocmd->u.mode.mode[MASTER] = ch->device[MASTER].mode;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
if (iocmd->u.mode.mode[SLAVE] >= 0 && ch->device[SLAVE].param)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ch->device[SLAVE].setmode(&ch->device[SLAVE],
iocmd->u.mode.mode[SLAVE]);
iocmd->u.mode.mode[SLAVE] = ch->device[SLAVE].mode;
error = 0;
break;
Add ioctl to add a spare disk to a RAID array. Fix the discovery of RAID's to not grap unused disks. Change the probe printing of a RAID a bit.
2003-05-02 12:41:44 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATAREQUEST:
if (!device || !(ch = device_get_softc(device))) {
error = ENXIO;
break;
}
if (!(atadev = &ch->device[iocmd->device])) {
error = ENODEV;
break;
}
if (!(buf = malloc(iocmd->u.request.count, M_ATA, M_NOWAIT))) {
error = ENOMEM;
break;
}
if (!(request = ata_alloc_request())) {
error = ENOMEM;
free(buf, M_ATA);
break;
}
if (iocmd->u.request.flags & ATA_CMD_WRITE) {
error = copyin(iocmd->u.request.data, buf, iocmd->u.request.count);
Add support for sending ATAPI commands via ioctl.
2001-08-30 09:47:17 +00:00
if (error) {
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
free(buf, M_ATA);
ata_free_request(request);
break;
Add support for sending ATAPI commands via ioctl.
2001-08-30 09:47:17 +00:00
}
Silence a warning when compile without atapi devices.
2002-03-10 21:03:04 +00:00
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->device = atadev;
Misc little cleanups.
2002-03-26 09:31:22 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (iocmd->u.request.flags & ATA_CMD_ATAPI) {
request->flags = ATA_R_ATAPI;
bcopy(iocmd->u.request.u.atapi.ccb, request->u.atapi.ccb, 16);
General cleanup. Dont be so verbose in the probe, only ONE line printed now, to get more info boot verbose. Centralise most printf's in ata-all & ata-dma to use the ata_printf function, it saves alot of codelines. Repeat the identify command if drive fails the first. Protect the timeout functions with splbio. Dont update the transfer details before we are sure the transfer succeded, this way they are proberly retried on errors. Move the handling of next_writeable to userland. Use the READ_CD command to read CD's. That enables us to read _anything_ via the normal read/write interface. This kindof obsoletes the READAUDIO ioctl, but we keep that for now.
2000-01-24 20:45:24 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
else {
request->u.ata.command = iocmd->u.request.u.ata.command;
request->u.ata.feature = iocmd->u.request.u.ata.feature;
request->u.ata.lba = iocmd->u.request.u.ata.lba;
request->u.ata.count = iocmd->u.request.u.ata.count;
General cleanup. Dont be so verbose in the probe, only ONE line printed now, to get more info boot verbose. Centralise most printf's in ata-all & ata-dma to use the ata_printf function, it saves alot of codelines. Repeat the identify command if drive fails the first. Protect the timeout functions with splbio. Dont update the transfer details before we are sure the transfer succeded, this way they are proberly retried on errors. Move the handling of next_writeable to userland. Use the READ_CD command to read CD's. That enables us to read _anything_ via the normal read/write interface. This kindof obsoletes the READAUDIO ioctl, but we keep that for now.
2000-01-24 20:45:24 +00:00
}
Rearrange the probecode, so that 80pin cables can be identified correctly on both master and slave. Smash together the ata_params & atapi_params structures as they are more or less equal anyways. Get rid of the last SYSINIT's in here.
2000-01-18 21:02:59 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
request->timeout = iocmd->u.request.timeout;
request->data = buf;
request->bytecount = iocmd->u.request.count;
request->transfersize = request->bytecount;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (iocmd->u.request.flags & ATA_CMD_CONTROL)
request->flags |= ATA_R_CONTROL;
if (iocmd->u.request.flags & ATA_CMD_READ)
request->flags |= ATA_R_READ;
if (iocmd->u.request.flags & ATA_CMD_WRITE)
request->flags |= ATA_R_WRITE;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_queue_request(request);
Add support for VIA 82C596 controller Better shared irq handeling for Promise & HPT366 controllers Setup prober PIO mode timings on Promise & HPT366 controllers Update Copyright headers to be Y2K compliant :)
2000-01-03 10:26:59 +00:00
Return the translated result code from ATA/ATAPI commands.
2003-08-27 15:27:56 +00:00
if (request->result)
iocmd->u.request.error = request->result;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
else {
if (iocmd->u.request.flags & ATA_CMD_READ)
error = copyout(buf,
iocmd->u.request.data, iocmd->u.request.count);
else
error = 0;
}
free(buf, M_ATA);
ata_free_request(request);
break;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATAREINIT:
Always pick up giant before returning from an ioctl call.
2004-08-24 15:09:05 +00:00
if (!device || !(ch = device_get_softc(device))) {
error = ENXIO;
break;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
error = ata_reinit(ch);
ata_start(ch);
break;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATAATTACH:
if (!device) {
error = ENXIO;
break;
}
/* SOS should enable channel HW on controller XXX */
error = ata_probe(device);
if (!error)
error = ata_attach(device);
break;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATADETACH:
if (!device) {
error = ENXIO;
break;
}
error = ata_detach(device);
/* SOS should disable channel HW on controller XXX */
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
break;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATARAID
case ATARAIDCREATE:
error = ata_raid_create(&iocmd->u.raid_setup);
break;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATARAIDDELETE:
error = ata_raid_delete(iocmd->channel);
break;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATARAIDSTATUS:
error = ata_raid_status(iocmd->channel, &iocmd->u.raid_status);
break;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATARAIDADDSPARE:
error = ata_raid_addspare(iocmd->channel, iocmd->u.raid_spare.disk);
break;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
case ATARAIDREBUILD:
error = ata_raid_rebuild(iocmd->channel);
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
break;
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
#endif
Update the tags handling a bit, which makes support for the older IBM DTTA series of drives possible. Update error handling a bit now we are here.
2002-07-22 18:35:01 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
PICKUP_GIANT();
return error;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/*
* device probe functions
*/
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
static int
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_getparam(struct ata_device *atadev, u_int8_t command)
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
struct ata_request *request;
int error = ENOMEM;
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
if (!atadev->param)
atadev->param = malloc(sizeof(struct ata_params), M_ATA, M_NOWAIT);
if (atadev->param) {
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
request = ata_alloc_request();
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (request) {
Be more robust in the probe. We dont want to get into a loop with reinitting when we try to identify devices. If they dont interrupt on identify we retry once. If this fails we simply ignore that device.
2004-01-30 19:16:08 +00:00
int retries = 2;
while (retries-- > 0) {
request->device = atadev;
request->timeout = 5;
Improve (hopefully) on the workaround code for devices that doesn't interrupt when command is done, ie some ATAPI CD drives with no media loaded.
2004-08-16 09:32:35 +00:00
request->retries = 0;
Be more robust in the probe. We dont want to get into a loop with reinitting when we try to identify devices. If they dont interrupt on identify we retry once. If this fails we simply ignore that device.
2004-01-30 19:16:08 +00:00
request->u.ata.command = command;
request->flags = (ATA_R_READ | ATA_R_IMMEDIATE);
request->data = (caddr_t)atadev->param;
request->bytecount = sizeof(struct ata_params);
Fix the panic (""memory modified after free") when ata_getparam() fails and retries. Found by: Nate Lawson
2004-07-31 10:29:29 +00:00
request->donecount = 0;
Be more robust in the probe. We dont want to get into a loop with reinitting when we try to identify devices. If they dont interrupt on identify we retry once. If this fails we simply ignore that device.
2004-01-30 19:16:08 +00:00
request->transfersize = DEV_BSIZE;
Rearrange the probe code yet again.
2003-09-01 11:13:21 +00:00
ata_queue_request(request);
if (!(error = request->result))
break;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_free_request(request);
Add new support for locking an ATA channel and use that throughout the ATA/ATAPI driver. This solves the concurrency problem with the new GEOM code, and also cuts a good deal of the patch size in the upcoming MFC.
2002-03-11 21:04:32 +00:00
}
Fix ata_getparam to accept the fact that some crappy devices can pose as both master and slave at the same time confusing the probe code.
2004-01-13 21:35:39 +00:00
if (!error && (isprint(atadev->param->model[0]) ||
isprint(atadev->param->model[1]))) {
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
struct ata_params *atacap = atadev->param;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#if BYTE_ORDER == BIG_ENDIAN
int16_t *ptr;
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
for (ptr = (int16_t *)atacap;
ptr < (int16_t *)atacap + sizeof(struct ata_params)/2; ptr++) {
*ptr = bswap16(*ptr);
}
Fourth update to the new ATA/ATAPI driver: Well, better late than newer, but things has been hectic around here, sorry for the long delay. DMA support has been added to the ATA disk driver. This only works on Intel PIIX3/4, Acer Aladdin and Promise controllers. The promise support works without the BIOS on the board, and timing modes are set to support up to UDMA speed. This solves the problems with having more than one promise controller in the same system. There is support for "generic" DMA, that might work on other controllers, but now you have been warned :) More chipset specific code will come soon, I have to find testers with the approbiate HW, more on that when I have it ready. The system now uses its own major numbers, please run MAKEDEV with the devices you need (ad?, acd?, afd?, ast?). For now the disk driver will also attach to the old wd major so one can at least boot without this step, but be warned, this will eventually go away. The bootblocks will have to be changed before one can boot directly from an "ad" device though. Fixed problems: All known hang problems should be solved The probe code has been sligthly changed, this should solve the reports I have lying around (I hope). Hangs when accessing ata & atapi device on the same channel simultaniously. A real braino in ata_start caused this, fixed. As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code. Especially the DMA support can hose your disk real bad if anything goes wrong, agaiin you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-03-28 18:57:20 +00:00
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (!((atacap->model[0] == 'N' && atacap->model[1] == 'E') ||
(atacap->model[0] == 'F' && atacap->model[1] == 'X') ||
(atacap->model[0] == 'P' && atacap->model[1] == 'i')))
bswap(atacap->model, sizeof(atacap->model));
btrim(atacap->model, sizeof(atacap->model));
bpack(atacap->model, atacap->model, sizeof(atacap->model));
bswap(atacap->revision, sizeof(atacap->revision));
btrim(atacap->revision, sizeof(atacap->revision));
bpack(atacap->revision, atacap->revision, sizeof(atacap->revision));
bswap(atacap->serial, sizeof(atacap->serial));
btrim(atacap->serial, sizeof(atacap->serial));
bpack(atacap->serial, atacap->serial, sizeof(atacap->serial));
if (bootverbose)
ata_prtdev(atadev,
"pio=0x%02x wdma=0x%02x udma=0x%02x cable=%spin\n",
ata_pmode(atacap), ata_wmode(atacap),
ata_umode(atacap),
(atacap->hwres & ATA_CABLE_ID) ? "80":"40");
Add new support for locking an ATA channel and use that throughout the ATA/ATAPI driver. This solves the concurrency problem with the new GEOM code, and also cuts a good deal of the patch size in the upcoming MFC.
2002-03-11 21:04:32 +00:00
}
Fix ata_getparam to accept the fact that some crappy devices can pose as both master and slave at the same time confusing the probe code.
2004-01-13 21:35:39 +00:00
else {
if (!error)
error = ENXIO;
if (atadev->param) {
free(atadev->param, M_ATA);
atadev->param = NULL;
}
}
Finally!! The much roumored replacement for our current IDE/ATA/ATAPI is materialising in the CVS repositories around the globe. So what does this bring us: A new reengineered ATA/ATAPI subsystem, that tries to overcome most of the deficiencies with the current drivers. It supports PCI as well as ISA devices without all the hackery in ide_pci.c to make PCI devices look like ISA counterparts. It doesn't have the excessive wait problem on probe, in fact you shouldn't notice any delay when your devices are getting probed. Probing and attaching of devices are postponed until interrupts are enabled (well almost, not finished yet for disks), making things alot cleaner. Improved performance, although DMA support is still WIP and not in this pre alpha release, worldstone is faster with the new driver compared to the old even with DMA. So what does it take away: There is NO support for old MFM/RLL/ESDI disks. There is NO support for bad144, if your disk is bad, ditch it, it has already outgrown its internal spare sectors, and is dying. For you to try this out, you will have to modify your kernel config file to use the "ata" controller instead of all wdc? entries. example: # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes #You should add the following on ISA systems: controller ata1 at isa? port "IO_WD1" bio irq 14 controller ata2 at isa? port "IO_WD2" bio irq 15 You can leave it all in there, the system knows how to manage. For now this driver reuses the device entries from the old system (that will probably change later), but remember that disks are now numbered in the sequence they are found (like the SCSI system) not as absolute positions as the old system. Although I have tested this on all the systems I can get my hands on, there might very well be gremlins in there, so use AT YOU OWN RISK!! This is still WIP, so there are lots of rough edges and unfinished things in there, and what I have in my lab might look very different from whats in CVS at any given time. So please have all eventual changes go through me, or chances are they just dissapears... I would very much like to hear from you, both good and bad news are very welcome. Enjoy!! -Søren
1999-03-01 21:19:19 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
return error;
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
static void
ata_identify_devices(struct ata_channel *ch)
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (ch->devices & ATA_ATA_SLAVE) {
if (ata_getparam(&ch->device[SLAVE], ATA_ATA_IDENTIFY))
ch->devices &= ~ATA_ATA_SLAVE;
#ifdef DEV_ATADISK
else
ch->device[SLAVE].attach = ad_attach;
#endif
Fix yet another fake slave problem for PCCARD devices.
2001-12-25 14:43:08 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (ch->devices & ATA_ATAPI_SLAVE) {
if (ata_getparam(&ch->device[SLAVE], ATA_ATAPI_IDENTIFY))
ch->devices &= ~ATA_ATAPI_SLAVE;
else {
Attempt to handle suspend/resume better.
2004-07-12 10:50:50 +00:00
ata_controlcmd(&ch->device[SLAVE], ATA_ATAPI_RESET, 0, 0, 0);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
switch (ch->device[SLAVE].param->config & ATA_ATAPI_TYPE_MASK) {
#ifdef DEV_ATAPICD
case ATA_ATAPI_TYPE_CDROM:
ch->device[SLAVE].attach = acd_attach;
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
break;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#endif
#ifdef DEV_ATAPIFD
case ATA_ATAPI_TYPE_DIRECT:
ch->device[SLAVE].attach = afd_attach;
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
break;
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATAPIST
case ATA_ATAPI_TYPE_TAPE:
ch->device[SLAVE].attach = ast_attach;
break;
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
}
Refine the detach/attach code. Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
2001-03-14 12:05:44 +00:00
}
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (ch->devices & ATA_ATA_MASTER) {
if (ata_getparam(&ch->device[MASTER], ATA_ATA_IDENTIFY))
ch->devices &= ~ATA_ATA_MASTER;
Refine the detach/attach code. Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
2001-03-14 12:05:44 +00:00
#ifdef DEV_ATADISK
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
else
ch->device[MASTER].attach = ad_attach;
Refine the detach/attach code. Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
2001-03-14 12:05:44 +00:00
#endif
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (ch->devices & ATA_ATAPI_MASTER) {
if (ata_getparam(&ch->device[MASTER], ATA_ATAPI_IDENTIFY))
ch->devices &= ~ATA_ATAPI_MASTER;
else {
Attempt to handle suspend/resume better.
2004-07-12 10:50:50 +00:00
ata_controlcmd(&ch->device[MASTER], ATA_ATAPI_RESET, 0, 0, 0);
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
switch (ch->device[MASTER].param->config & ATA_ATAPI_TYPE_MASK) {
#ifdef DEV_ATAPICD
case ATA_ATAPI_TYPE_CDROM:
ch->device[MASTER].attach = acd_attach;
break;
Refine the detach/attach code. Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
2001-03-14 12:05:44 +00:00
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATAPIFD
case ATA_ATAPI_TYPE_DIRECT:
ch->device[MASTER].attach = afd_attach;
break;
Add the ability to use ATAPI devices via CAM. The CAM<>ATAPI layer was submitted by "Thomas Quinot <thomas@cuivre.fr.eu.org>" changes form the version on the net by me (formatting, ability to be used alone without the ATAPI native device driver, proper speed reporting...) See /sys/conf/NOTES for usage. Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
2002-08-09 20:54:06 +00:00
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATAPIST
case ATA_ATAPI_TYPE_TAPE:
ch->device[MASTER].attach = ast_attach;
break;
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
#endif
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
}
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
}
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
/* setup basic transfer mode by setting PIO mode and DMA if supported */
Add support for the Promise command sequencer present on all modern Promise controllers (PDC203** PDC206**). This also adds preliminary support for the Promise SX4/SX4000 but *only* as a "normal" Promise ATA controller (ATA RAID's are supported though but only RAID0, RAID1 and RAID0+1). This cuts off yet another 5-8% of the command overhead on promise controllers, making them the fastest we have ever had support for. Work is now continuing to add support for this in ATA RAID, to accellerate ATA RAID quite a bit on these controllers, and especially the SX4/SX4000 series as they have quite a few tricks in there.. This commit also adds a few fixes to the SATA code needed for proper support.
2004-04-13 09:44:20 +00:00
if (ch->device[MASTER].param) {
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
ch->device[MASTER].setmode(&ch->device[MASTER], ATA_PIO_MAX);
if ((((ch->devices & ATA_ATAPI_MASTER) && atapi_dma &&
Change the default to switch on DMA on ATAPI devices if they can do UDMA2 (ATA33) mode and beyond.
2004-08-01 12:31:38 +00:00
(ch->device[MASTER].param->config&ATA_DRQ_MASK) != ATA_DRQ_INTR &&
ata_umode(ch->device[MASTER].param) >= ATA_UDMA2) ||
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
((ch->devices & ATA_ATA_MASTER) && ata_dma)) && ch->dma)
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
ch->device[MASTER].setmode(&ch->device[MASTER], ATA_DMA_MAX);
}
Add support for the Promise command sequencer present on all modern Promise controllers (PDC203** PDC206**). This also adds preliminary support for the Promise SX4/SX4000 but *only* as a "normal" Promise ATA controller (ATA RAID's are supported though but only RAID0, RAID1 and RAID0+1). This cuts off yet another 5-8% of the command overhead on promise controllers, making them the fastest we have ever had support for. Work is now continuing to add support for this in ATA RAID, to accellerate ATA RAID quite a bit on these controllers, and especially the SX4/SX4000 series as they have quite a few tricks in there.. This commit also adds a few fixes to the SATA code needed for proper support.
2004-04-13 09:44:20 +00:00
if (ch->device[SLAVE].param) {
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
ch->device[SLAVE].setmode(&ch->device[SLAVE], ATA_PIO_MAX);
if ((((ch->devices & ATA_ATAPI_SLAVE) && atapi_dma &&
Change the default to switch on DMA on ATAPI devices if they can do UDMA2 (ATA33) mode and beyond.
2004-08-01 12:31:38 +00:00
(ch->device[SLAVE].param->config&ATA_DRQ_MASK) != ATA_DRQ_INTR &&
ata_umode(ch->device[SLAVE].param) >= ATA_UDMA2) ||
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
((ch->devices & ATA_ATA_SLAVE) && ata_dma)) && ch->dma)
Centralise mode setting. Instead of doing it in all subdrivers, do it in ata-all.c where it belongs. Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
ch->device[SLAVE].setmode(&ch->device[SLAVE], ATA_DMA_MAX);
}
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
static void
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_boot_attach(void)
Add flushing of devices on shutdown. Note: this might print failure messages on some systems, unfortunatly the info from the device, stating if flushing is supported, cannot be trusted so the operation is always issued on all devices, just in case...
2003-05-02 13:47:44 +00:00
{
struct ata_channel *ch;
int ctlr;
Release the hold on ata_delayed_attach earlier so we can use tsleep in the boot probe as well. Suggested by: gibbs
2004-09-09 13:25:46 +00:00
if (ata_delayed_attach) {
config_intrhook_disestablish(ata_delayed_attach);
free(ata_delayed_attach, M_TEMP);
ata_delayed_attach = NULL;
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/*
* run through all ata devices and look for real ATA & ATAPI devices
* using the hints we found in the early probe, this avoids some of
* the delays probing of non-exsistent devices can cause.
*/
for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) {
Add flushing of devices on shutdown. Note: this might print failure messages on some systems, unfortunatly the info from the device, stating if flushing is supported, cannot be trusted so the operation is always issued on all devices, just in case...
2003-05-02 13:47:44 +00:00
if (!(ch = devclass_get_softc(ata_devclass, ctlr)))
continue;
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
ata_identify_devices(ch);
if (ch->device[MASTER].attach)
ch->device[MASTER].attach(&ch->device[MASTER]);
if (ch->device[SLAVE].attach)
ch->device[SLAVE].attach(&ch->device[SLAVE]);
#ifdef DEV_ATAPICAM
atapi_cam_attach_bus(ch);
Fourth update to the new ATA/ATAPI driver: Well, better late than newer, but things has been hectic around here, sorry for the long delay. DMA support has been added to the ATA disk driver. This only works on Intel PIIX3/4, Acer Aladdin and Promise controllers. The promise support works without the BIOS on the board, and timing modes are set to support up to UDMA speed. This solves the problems with having more than one promise controller in the same system. There is support for "generic" DMA, that might work on other controllers, but now you have been warned :) More chipset specific code will come soon, I have to find testers with the approbiate HW, more on that when I have it ready. The system now uses its own major numbers, please run MAKEDEV with the devices you need (ad?, acd?, afd?, ast?). For now the disk driver will also attach to the old wd major so one can at least boot without this step, but be warned, this will eventually go away. The bootblocks will have to be changed before one can boot directly from an "ad" device though. Fixed problems: All known hang problems should be solved The probe code has been sligthly changed, this should solve the reports I have lying around (I hope). Hangs when accessing ata & atapi device on the same channel simultaniously. A real braino in ata_start caused this, fixed. As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code. Especially the DMA support can hose your disk real bad if anything goes wrong, agaiin you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-03-28 18:57:20 +00:00
#endif
Now all actual probing of both ATA & ATAPI devices are done after interrupts are enabled, this kills the last "unwanted interrupts" (and there is no ugly hacks like in the old driver to avoid them). COmmand interrupt devices are now supported, this applies mostly to older CDROM's and apparently also the ZIP. Fixed problems: Number of total sectors wrong on some older drives. Fixed by not using the LBA size unless we know its valid. There has also been more general code clenaups, some reorgs also.
1999-03-05 09:43:30 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
#ifdef DEV_ATARAID
ata_raid_attach();
#endif
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
/*
* misc support functions
*/
Introduce ata_udelay() that uses tsleep instead of DELAY if possible. In places where we have long delays that doesn't depend on too accurate timing, use ata_udelay() instead of DELAY() so we dont uselessly spin the CPU if not nessesary;
2004-09-03 12:10:44 +00:00
void
ata_udelay(int interval)
{
if (interval < (1000000/hz) || ata_delayed_attach)
DELAY(interval);
else
tsleep(&interval, PRIBIO, "ataslp", interval/(1000000/hz));
}
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
static void
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
bswap(int8_t *buf, int len)
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
u_int16_t *ptr = (u_int16_t*)(buf + len);
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
while (--ptr >= (u_int16_t*)buf)
*ptr = ntohs(*ptr);
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
}
static void
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
btrim(int8_t *buf, int len)
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
int8_t *ptr;
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
for (ptr = buf; ptr < buf+len; ++ptr)
Ignore leading '_' in model name returned by devices. This make "_NEC" devices appear as "NEC" which is more corrent. The reason is tha NEC originally screwed up on the byteorder in the model string, so now that they have realized that they prefixed the '_' so that not every ATA driver on the planet would call them "EN C" :)
2004-09-16 09:35:01 +00:00
if (!*ptr || *ptr == '_')
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
*ptr = ' ';
for (ptr = buf + len - 1; ptr >= buf && *ptr == ' '; --ptr)
*ptr = 0;
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
}
static void
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
bpack(int8_t *src, int8_t *dst, int len)
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
{
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
int i, j, blank;
Add support for getting status (fan, temp, 5V and 12V levels) from Promise Superswap enclosures. Sponsored by: Advanis
2002-03-30 16:36:41 +00:00
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
for (i = j = blank = 0 ; i < len; i++) {
if (blank && src[i] == ' ') continue;
if (blank && src[i] != ' ') {
dst[j++] = src[i];
blank = 0;
continue;
Dont hang the channel on enclosures without sensors.
2003-03-12 10:59:35 +00:00
}
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
if (src[i] == ' ') {
blank = 1;
if (i == 0)
continue;
}
dst[j++] = src[i];
Update the code that deals with disk enclosures: Properly handle the newer Promise SuperSwap 1000 enclosures. Print out what kind of enclosure was found in the probe. Misc cleanups in the enclosure handling code. Sponsored by: Advanis Inc.
2003-01-27 09:04:29 +00:00
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
if (j < len)
This is a major rework of the ATA driver (ATAng) Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
dst[j] = 0x00;
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
}
int
ata_printf(struct ata_channel *ch, int device, const char * fmt, ...)
{
va_list ap;
int ret;
if (device == -1)
ret = printf("ata%d: ", device_get_unit(ch->dev));
else {
if (ch->device[ATA_DEV(device)].name)
ret = printf("%s: ", ch->device[ATA_DEV(device)].name);
else
ret = printf("ata%d-%s: ", device_get_unit(ch->dev),
(device == ATA_MASTER) ? "master" : "slave");
}
va_start(ap, fmt);
ret += vprintf(fmt, ap);
va_end(ap);
return ret;
}
int
ata_prtdev(struct ata_device *atadev, const char * fmt, ...)
{
va_list ap;
int ret;
if (atadev->name)
ret = printf("%s: ", atadev->name);
else
ret = printf("ata%d-%s: ", device_get_unit(atadev->channel->dev),
(atadev->unit == ATA_MASTER) ? "master" : "slave");
va_start(ap, fmt);
ret += vprintf(fmt, ap);
va_end(ap);
return ret;
}
void
ata_set_name(struct ata_device *atadev, char *name, int lun)
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
{
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
atadev->name = malloc(strlen(name) + 4, M_ATA, M_NOWAIT);
if (atadev->name)
sprintf(atadev->name, "%s%d", name, lun);
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
}
void
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
ata_free_name(struct ata_device *atadev)
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
{
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
if (atadev->name)
free(atadev->name, M_ATA);
atadev->name = NULL;
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
int
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
ata_get_lun(u_int32_t *map)
{
int lun = ffs(~*map) - 1;
*map |= (1 << lun);
return lun;
}
Fix the clone functionality in atapi-cd, it didn't work for devs other than the first, and allowed to clone a nonexistent device..
2001-02-06 12:41:53 +00:00
int
ata_test_lun(u_int32_t *map, int lun)
{
Damn! that was the wrong patch! get it right this time....
2001-02-06 12:49:33 +00:00
return (*map & (1 << lun));
Fix the clone functionality in atapi-cd, it didn't work for devs other than the first, and allowed to clone a nonexistent device..
2001-02-06 12:41:53 +00:00
}
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
void
ata_free_lun(u_int32_t *map, int lun)
{
*map &= ~(1 << lun);
}
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
Add support for tagged queuing on ATA drives. There is only support for IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
2000-09-19 11:08:39 +00:00
char *
ata_mode2str(int mode)
Ten'th update to the new ATA/ATAPI driver: It been awhile since the last major update, as a benefit there are some cool things in this one (and new bugs probably :) )... The ATA driver has grown "real" timeout support for all devices. This means that it should be possible to get in contact with (especially) lost ATAPI devices. It also means that the ATA driver is now usable on notebooks as it will DTRT on resume. An experimental hack at utilizing the Promise66's at UDMA66 is in there, but I cant test it. If someone feels like sending me one, give me a ping. The ATAPI DMA enableling scheme has been changed, also better DMA support for the Aladdin chipset has been implemented for ATAPI devices. Note that the Aladdin apparently only can do DMA reads on ATAPI devices, and the Promise cant do ATAPI DMA at all. I have seen problems on some ATAPI devices that should be able to run in DMA mode, so if you encounter problems with hanging atapi devices during the probe, or during access, disable DMA in atapi-all.c, and let me know. It might be nessesary to do this via a "white list" for known good devices... The ATAPI CDROM driver can now use eject/close without hanging and the bug that caused reading beyond the end of a CD has been fixed. Media change is also handled proberly. DVD drives are identified and are usable as CDROM devices at least, I dont have the HW to test this further, see above :). The ATAPI tape driver has gotten some support for using the DSC method for not blocking the IDE channel during read/write when the device has full buffers. It knows about the OnStream DI-30 device, support is not completed yet, but it can function as a primitive backup medium, without filemarks, and without bad media handeling. This is because the OnStream device doesn't handle this (like everybody else) in HW. It also now supports getting/setting the record position on devices that supports it. Some rather major cleanups and rearrangements as well (cvs -b diff is your freind). I'm closing in on declaring this for beta code, most of the infrastruture is in place by now. As usual USE AT YOUR OWN RISK!!, this is still alpha level code. This driver can hose your disk real bad if anything goes wrong, but now you have been warned :) But please tell me how it works for you! Enjoy! -Søren
1999-09-21 19:50:40 +00:00
{
switch (mode) {
Add sysctl oid hw.atamodes to set the transfermodes online.
2000-01-27 19:00:51 +00:00
case ATA_PIO: return "BIOSPIO";
Add support for VIA 82C596 controller Better shared irq handeling for Promise & HPT366 controllers Setup prober PIO mode timings on Promise & HPT366 controllers Update Copyright headers to be Y2K compliant :)
2000-01-03 10:26:59 +00:00
case ATA_PIO0: return "PIO0";
case ATA_PIO1: return "PIO1";
case ATA_PIO2: return "PIO2";
case ATA_PIO3: return "PIO3";
case ATA_PIO4: return "PIO4";
Major update of the ATA RAID code, part 1: Overhaul of the attach/detach code and structures, there were some nasty bugs in the old implementation. This made it possible to collapse the ATA/ATAPI device control structures into one generic structure. A note here, the kernel is NOT ready for detach of active devices, it fails all over in random places, but for inactive devices it works. However for ATA RAID this works, since the RAID abstration layer insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the physical disks. Proberly detect the RAID's from the BIOS, and mark critical RAID1 arrays as such, but continue if there is enough of the mirror left to do so. Properly fail arrays on a live system. For RAID0 that means return EIO, and for RAID1 it means continue on the still working part of the mirror if possible, else return EIO. If the state changes, log this to the console. Allow for Promise & Highpoint controllers/arrays to coexist on the same machine. It is not possible to distribute arrays over different makes of controllers though. If Promise SuperSwap enclosures are used, signal disk state on the status LED on the front. Misc fixes that I had lying around for various minor bugs. Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
case ATA_DMA: return "BIOSDMA";
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
case ATA_WDMA0: return "WDMA0";
case ATA_WDMA1: return "WDMA1";
Add support for VIA 82C596 controller Better shared irq handeling for Promise & HPT366 controllers Setup prober PIO mode timings on Promise & HPT366 controllers Update Copyright headers to be Y2K compliant :)
2000-01-03 10:26:59 +00:00
case ATA_WDMA2: return "WDMA2";
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
case ATA_UDMA0: return "UDMA16";
case ATA_UDMA1: return "UDMA25";
Add support for VIA 82C596 controller Better shared irq handeling for Promise & HPT366 controllers Setup prober PIO mode timings on Promise & HPT366 controllers Update Copyright headers to be Y2K compliant :)
2000-01-03 10:26:59 +00:00
case ATA_UDMA2: return "UDMA33";
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
case ATA_UDMA3: return "UDMA40";
Add support for VIA 82C596 controller Better shared irq handeling for Promise & HPT366 controllers Setup prober PIO mode timings on Promise & HPT366 controllers Update Copyright headers to be Y2K compliant :)
2000-01-03 10:26:59 +00:00
case ATA_UDMA4: return "UDMA66";
Add experimental code for ATA100 support on: Promise Ultra100 / Fasttrak100 HighPoint HPT370 controllers (fx Abit KA7-100 onboard ctrl, Abit HotRod 100) Intel ICH2 (Intel 815E based motherboards) So far I can read >90MB/s on the Promise and the HPT370. I can write >64MB/s on the promise and >50MB/s on the HPT370 so it seems writing is still done in ATA66 mode :( The ICH2 support is untested as of yet...
2000-08-06 19:51:58 +00:00
case ATA_UDMA5: return "UDMA100";
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
case ATA_UDMA6: return "UDMA133";
Add string for SATA150 Approved by: re
2003-05-18 16:43:08 +00:00
case ATA_SA150: return "SATA150";
Add support for VIA 82C596 controller Better shared irq handeling for Promise & HPT366 controllers Setup prober PIO mode timings on Promise & HPT366 controllers Update Copyright headers to be Y2K compliant :)
2000-01-03 10:26:59 +00:00
default: return "???";
}
}
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
int
ata_pmode(struct ata_params *ap)
{
if (ap->atavalid & ATA_FLAG_64_70) {
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
if (ap->apiomodes & 0x02)
return ATA_PIO4;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
if (ap->apiomodes & 0x01)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_PIO3;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
}
Update the PIO mode gathering code. Reported by: bde
2003-09-08 08:30:43 +00:00
if (ap->mwdmamodes & 0x04)
return ATA_PIO4;
if (ap->mwdmamodes & 0x02)
return ATA_PIO3;
if (ap->mwdmamodes & 0x01)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_PIO2;
Update the PIO mode gathering code. Reported by: bde
2003-09-08 08:30:43 +00:00
if ((ap->retired_piomode & ATA_RETIRED_PIO_MASK) == 0x200)
return ATA_PIO2;
if ((ap->retired_piomode & ATA_RETIRED_PIO_MASK) == 0x100)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_PIO1;
Update the PIO mode gathering code. Reported by: bde
2003-09-08 08:30:43 +00:00
if ((ap->retired_piomode & ATA_RETIRED_PIO_MASK) == 0x000)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_PIO0;
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
return ATA_PIO0;
}
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
int
ata_wmode(struct ata_params *ap)
{
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
if (ap->mwdmamodes & 0x04)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_WDMA2;
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
if (ap->mwdmamodes & 0x02)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_WDMA1;
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
if (ap->mwdmamodes & 0x01)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_WDMA0;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
return -1;
}
int
ata_umode(struct ata_params *ap)
{
if (ap->atavalid & ATA_FLAG_88) {
Update with latest ATA/ATAPI ver 6 rev 2 items.
2001-10-06 11:07:04 +00:00
if (ap->udmamodes & 0x40)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA6;
Add experimental code for ATA100 support on: Promise Ultra100 / Fasttrak100 HighPoint HPT370 controllers (fx Abit KA7-100 onboard ctrl, Abit HotRod 100) Intel ICH2 (Intel 815E based motherboards) So far I can read >90MB/s on the Promise and the HPT370. I can write >64MB/s on the promise and >50MB/s on the HPT370 so it seems writing is still done in ATA66 mode :( The ICH2 support is untested as of yet...
2000-08-06 19:51:58 +00:00
if (ap->udmamodes & 0x20)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA5;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
if (ap->udmamodes & 0x10)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA4;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
if (ap->udmamodes & 0x08)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA3;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
if (ap->udmamodes & 0x04)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA2;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
if (ap->udmamodes & 0x02)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA1;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
if (ap->udmamodes & 0x01)
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return ATA_UDMA0;
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
}
return -1;
}
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
int
ata_limit_mode(struct ata_device *atadev, int mode, int maxmode)
{
if (maxmode && mode > maxmode)
mode = maxmode;
if (mode >= ATA_UDMA0 && ata_umode(atadev->param) > 0)
return min(mode, ata_umode(atadev->param));
if (mode >= ATA_WDMA0 && ata_wmode(atadev->param) > 0)
return min(mode, ata_wmode(atadev->param));
Whitespace cleanup.
2004-05-20 14:49:12 +00:00
if (mode > ata_pmode(atadev->param))
First round off updates/fixes to the ATA driver. This moves all chipset specific code to a new file 'ata-chipset.c'. Extensive use of tables and pointers to avoid having the same switch on chipset type in several places, and to allow substituting various functions for different HW arch needs. Added PIO mode setup and all DMA modes. Support for all known SiS chipsets. Thanks to Christoph Kukulies for sponsoring a nice ASUS P4S8X SiS648 based board for this work! Tested on: i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
return min(mode, ata_pmode(atadev->param));
return mode;
}
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
static void
ata_init(void)
{
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
/* register controlling device */
Only allow root to attach/detach/etc ATA/ATAPI devices.
2001-03-19 11:55:13 +00:00
make_dev(&ata_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "ata");
Provide the interface to atacontrol and associated logic. see atacontrol(8) for more. Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS options are gone, use the tuneables listed in ata.4 instead from the loader (this makes it possible to switch off DMA before the driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
/* register boot attach to be run when interrupts are enabled */
if (!(ata_delayed_attach = (struct intr_config_hook *)
Use M_ZERO flag on malloc when approbiate.
2000-12-26 12:05:49 +00:00
malloc(sizeof(struct intr_config_hook),
M_TEMP, M_NOWAIT | M_ZERO))) {
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
printf("ata: malloc of delayed attach hook failed\n");
return;
}
ata_delayed_attach->ich_func = (void*)ata_boot_attach;
if (config_intrhook_establish(ata_delayed_attach) != 0) {
printf("ata: config_intrhook_establish failed\n");
free(ata_delayed_attach, M_TEMP);
}
Overhaul of the timeout/reinit framework. This should clear up most of the leftovers from the old version that really doesn't work anymore. Add a reset function for host-end of the ATA channel. This is needed for the SiI3112 in order to whack it back to reality if a device locks up the SATA interface (thereby preventing that we can reset the device). The result is that ATA now recovers from the timeouts that happens with the SiI3112A and more or less all disks based on old PATA electronics with a Marvell PATA->SATA converter. This includes lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
Use UMA instead of plain malloc for getting ATA request storage. This gives +10% performance on simple tests, so definitly worth it. A few percent more could be had by not using M_ZERO'd alloc's, but we then need to clear fields all over the place to be safe, and that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
/* register handler to flush write caches on shutdown */
Add flushing of devices on shutdown. Note: this might print failure messages on some systems, unfortunatly the info from the device, stating if flushing is supported, cannot be trusted so the operation is always issued on all devices, just in case...
2003-05-02 13:47:44 +00:00
if ((EVENTHANDLER_REGISTER(shutdown_post_sync, ata_shutdown,
NULL, SHUTDOWN_PRI_DEFAULT)) == NULL)
printf("ata: shutdown event registration failed!\n");
Use UMA instead of plain malloc for getting ATA request storage. This gives +10% performance on simple tests, so definitly worth it. A few percent more could be had by not using M_ZERO'd alloc's, but we then need to clear fields all over the place to be safe, and that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
/* init our UMA zone for ATA requests */
ata_zone = uma_zcreate("ata_request", sizeof(struct ata_request),
NULL, NULL, NULL, NULL, 0, 0);
Update the ata driver to take more advantage of newbus, this was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
2000-02-18 20:57:33 +00:00
}
SYSINIT(atadev, SI_SUB_DRIVERS, SI_ORDER_SECOND, ata_init, NULL)
Reference in New Issue Copy Permalink