freebsd-skq/sys/kern/vfs_bio.c

5501 lines
144 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2004 Poul-Henning Kamp
1997-12-22 11:54:00 +00:00
* Copyright (c) 1994,1997 John S. Dyson
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Copyright (c) 2013 The FreeBSD Foundation
* All rights reserved.
1994-05-24 10:09:53 +00:00
*
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* Portions of this software were developed by Konstantin Belousov
* under sponsorship from the FreeBSD Foundation.
*
1994-05-24 10:09:53 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
1994-05-24 10:09:53 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* this file contains a new buffer I/O scheme implementing a coherent
* VM object and buffer cache scheme. Pains have been taken to make
* sure that the performance degradation associated with schemes such
* as this is not realized.
*
* Author: John S. Dyson
* Significant help during the development and debugging phases
* had been provided by David Greenman, also of the FreeBSD core team.
*
* see man buf(9) for more info.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/bitset.h>
#include <sys/conf.h>
#include <sys/counter.h>
#include <sys/buf.h>
#include <sys/devicestat.h>
#include <sys/eventhandler.h>
#include <sys/fail.h>
#include <sys/ktr.h>
#include <sys/limits.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
#include <sys/kthread.h>
#include <sys/proc.h>
#include <sys/racct.h>
#include <sys/resourcevar.h>
#include <sys/rwlock.h>
#include <sys/smp.h>
#include <sys/sysctl.h>
#include <sys/sysproto.h>
#include <sys/vmem.h>
#include <sys/vmmeter.h>
#include <sys/vnode.h>
#include <sys/watchdog.h>
#include <geom/geom.h>
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/vm_kern.h>
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pageout.h>
#include <vm/vm_pager.h>
#include <vm/vm_extern.h>
#include <vm/vm_map.h>
#include <vm/swap_pager.h>
static MALLOC_DEFINE(M_BIOBUF, "biobuf", "BIO buffer");
struct bio_ops bioops; /* I/O operation notification */
struct buf_ops buf_ops_bio = {
.bop_name = "buf_ops_bio",
.bop_write = bufwrite,
.bop_strategy = bufstrategy,
.bop_sync = bufsync,
.bop_bdflush = bufbdflush,
};
struct bufqueue {
struct mtx_padalign bq_lock;
TAILQ_HEAD(, buf) bq_queue;
uint8_t bq_index;
uint16_t bq_subqueue;
int bq_len;
} __aligned(CACHE_LINE_SIZE);
#define BQ_LOCKPTR(bq) (&(bq)->bq_lock)
#define BQ_LOCK(bq) mtx_lock(BQ_LOCKPTR((bq)))
#define BQ_UNLOCK(bq) mtx_unlock(BQ_LOCKPTR((bq)))
#define BQ_ASSERT_LOCKED(bq) mtx_assert(BQ_LOCKPTR((bq)), MA_OWNED)
struct bufdomain {
struct bufqueue bd_subq[MAXCPU + 1]; /* Per-cpu sub queues + global */
struct bufqueue bd_dirtyq;
struct bufqueue *bd_cleanq;
struct mtx_padalign bd_run_lock;
/* Constants */
long bd_maxbufspace;
long bd_hibufspace;
long bd_lobufspace;
long bd_bufspacethresh;
int bd_hifreebuffers;
int bd_lofreebuffers;
int bd_hidirtybuffers;
int bd_lodirtybuffers;
int bd_dirtybufthresh;
int bd_lim;
/* atomics */
int bd_wanted;
int __aligned(CACHE_LINE_SIZE) bd_numdirtybuffers;
int __aligned(CACHE_LINE_SIZE) bd_running;
long __aligned(CACHE_LINE_SIZE) bd_bufspace;
int __aligned(CACHE_LINE_SIZE) bd_freebuffers;
} __aligned(CACHE_LINE_SIZE);
#define BD_LOCKPTR(bd) (&(bd)->bd_cleanq->bq_lock)
#define BD_LOCK(bd) mtx_lock(BD_LOCKPTR((bd)))
#define BD_UNLOCK(bd) mtx_unlock(BD_LOCKPTR((bd)))
#define BD_ASSERT_LOCKED(bd) mtx_assert(BD_LOCKPTR((bd)), MA_OWNED)
#define BD_RUN_LOCKPTR(bd) (&(bd)->bd_run_lock)
#define BD_RUN_LOCK(bd) mtx_lock(BD_RUN_LOCKPTR((bd)))
#define BD_RUN_UNLOCK(bd) mtx_unlock(BD_RUN_LOCKPTR((bd)))
#define BD_DOMAIN(bd) (bd - bdomain)
static struct buf *buf; /* buffer header pool */
extern struct buf *swbuf; /* Swap buffer header pool. */
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
caddr_t unmapped_buf;
/* Used below and for softdep flushing threads in ufs/ffs/ffs_softdep.c */
struct proc *bufdaemonproc;
2004-11-04 08:25:52 +00:00
static int inmem(struct vnode *vp, daddr_t blkno);
static void vm_hold_free_pages(struct buf *bp, int newbsize);
2004-09-15 20:54:23 +00:00
static void vm_hold_load_pages(struct buf *bp, vm_offset_t from,
vm_offset_t to);
static void vfs_page_set_valid(struct buf *bp, vm_ooffset_t off, vm_page_t m);
static void vfs_page_set_validclean(struct buf *bp, vm_ooffset_t off,
vm_page_t m);
static void vfs_clean_pages_dirty_buf(struct buf *bp);
static void vfs_setdirty_locked_object(struct buf *bp);
static void vfs_vmio_invalidate(struct buf *bp);
static void vfs_vmio_truncate(struct buf *bp, int npages);
static void vfs_vmio_extend(struct buf *bp, int npages, int size);
static int vfs_bio_clcheck(struct vnode *vp, int size,
daddr_t lblkno, daddr_t blkno);
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
static void breada(struct vnode *, daddr_t *, int *, int, struct ucred *, int,
void (*)(struct buf *));
static int buf_flush(struct vnode *vp, struct bufdomain *, int);
static int flushbufqueues(struct vnode *, struct bufdomain *, int, int);
2002-03-19 21:25:46 +00:00
static void buf_daemon(void);
static __inline void bd_wakeup(void);
static int sysctl_runningspace(SYSCTL_HANDLER_ARGS);
static void bufkva_reclaim(vmem_t *, int);
static void bufkva_free(struct buf *);
static int buf_import(void *, void **, int, int, int);
static void buf_release(void *, void **, int);
static void maxbcachebuf_adjust(void);
static inline struct bufdomain *bufdomain(struct buf *);
static void bq_remove(struct bufqueue *bq, struct buf *bp);
static void bq_insert(struct bufqueue *bq, struct buf *bp, bool unlock);
static int buf_recycle(struct bufdomain *, bool kva);
static void bq_init(struct bufqueue *bq, int qindex, int cpu,
const char *lockname);
static void bd_init(struct bufdomain *bd);
static int bd_flushall(struct bufdomain *bd);
static int sysctl_bufdomain_long(SYSCTL_HANDLER_ARGS);
static int sysctl_bufdomain_int(SYSCTL_HANDLER_ARGS);
static int sysctl_bufspace(SYSCTL_HANDLER_ARGS);
int vmiodirenable = TRUE;
SYSCTL_INT(_vfs, OID_AUTO, vmiodirenable, CTLFLAG_RW, &vmiodirenable, 0,
"Use the VM system for directory writes");
long runningbufspace;
SYSCTL_LONG(_vfs, OID_AUTO, runningbufspace, CTLFLAG_RD, &runningbufspace, 0,
"Amount of presently outstanding async buffer io");
SYSCTL_PROC(_vfs, OID_AUTO, bufspace, CTLTYPE_LONG|CTLFLAG_MPSAFE|CTLFLAG_RD,
NULL, 0, sysctl_bufspace, "L", "Physical memory used for buffers");
static counter_u64_t bufkvaspace;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, bufkvaspace, CTLFLAG_RD, &bufkvaspace,
"Kernel virtual memory used for buffers");
static long maxbufspace;
SYSCTL_PROC(_vfs, OID_AUTO, maxbufspace,
CTLTYPE_LONG|CTLFLAG_MPSAFE|CTLFLAG_RW, &maxbufspace,
__offsetof(struct bufdomain, bd_maxbufspace), sysctl_bufdomain_long, "L",
"Maximum allowed value of bufspace (including metadata)");
static long bufmallocspace;
SYSCTL_LONG(_vfs, OID_AUTO, bufmallocspace, CTLFLAG_RD, &bufmallocspace, 0,
"Amount of malloced memory for buffers");
static long maxbufmallocspace;
SYSCTL_LONG(_vfs, OID_AUTO, maxmallocbufspace, CTLFLAG_RW, &maxbufmallocspace,
0, "Maximum amount of malloced memory for buffers");
static long lobufspace;
SYSCTL_PROC(_vfs, OID_AUTO, lobufspace,
CTLTYPE_LONG|CTLFLAG_MPSAFE|CTLFLAG_RW, &lobufspace,
__offsetof(struct bufdomain, bd_lobufspace), sysctl_bufdomain_long, "L",
"Minimum amount of buffers we want to have");
long hibufspace;
SYSCTL_PROC(_vfs, OID_AUTO, hibufspace,
CTLTYPE_LONG|CTLFLAG_MPSAFE|CTLFLAG_RW, &hibufspace,
__offsetof(struct bufdomain, bd_hibufspace), sysctl_bufdomain_long, "L",
"Maximum allowed value of bufspace (excluding metadata)");
long bufspacethresh;
SYSCTL_PROC(_vfs, OID_AUTO, bufspacethresh,
CTLTYPE_LONG|CTLFLAG_MPSAFE|CTLFLAG_RW, &bufspacethresh,
__offsetof(struct bufdomain, bd_bufspacethresh), sysctl_bufdomain_long, "L",
"Bufspace consumed before waking the daemon to free some");
static counter_u64_t buffreekvacnt;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, buffreekvacnt, CTLFLAG_RW, &buffreekvacnt,
"Number of times we have freed the KVA space from some buffer");
static counter_u64_t bufdefragcnt;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, bufdefragcnt, CTLFLAG_RW, &bufdefragcnt,
"Number of times we have had to repeat buffer allocation to defragment");
static long lorunningspace;
SYSCTL_PROC(_vfs, OID_AUTO, lorunningspace, CTLTYPE_LONG | CTLFLAG_MPSAFE |
CTLFLAG_RW, &lorunningspace, 0, sysctl_runningspace, "L",
"Minimum preferred space used for in-progress I/O");
static long hirunningspace;
SYSCTL_PROC(_vfs, OID_AUTO, hirunningspace, CTLTYPE_LONG | CTLFLAG_MPSAFE |
CTLFLAG_RW, &hirunningspace, 0, sysctl_runningspace, "L",
"Maximum amount of space to use for in-progress I/O");
int dirtybufferflushes;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
SYSCTL_INT(_vfs, OID_AUTO, dirtybufferflushes, CTLFLAG_RW, &dirtybufferflushes,
0, "Number of bdwrite to bawrite conversions to limit dirty buffers");
int bdwriteskip;
SYSCTL_INT(_vfs, OID_AUTO, bdwriteskip, CTLFLAG_RW, &bdwriteskip,
0, "Number of buffers supplied to bdwrite with snapshot deadlock risk");
int altbufferflushes;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
SYSCTL_INT(_vfs, OID_AUTO, altbufferflushes, CTLFLAG_RW, &altbufferflushes,
0, "Number of fsync flushes to limit dirty buffers");
static int recursiveflushes;
SYSCTL_INT(_vfs, OID_AUTO, recursiveflushes, CTLFLAG_RW, &recursiveflushes,
0, "Number of flushes skipped due to being recursive");
static int sysctl_numdirtybuffers(SYSCTL_HANDLER_ARGS);
SYSCTL_PROC(_vfs, OID_AUTO, numdirtybuffers,
CTLTYPE_INT|CTLFLAG_MPSAFE|CTLFLAG_RD, NULL, 0, sysctl_numdirtybuffers, "I",
"Number of buffers that are dirty (has unwritten changes) at the moment");
static int lodirtybuffers;
SYSCTL_PROC(_vfs, OID_AUTO, lodirtybuffers,
2018-03-21 23:21:32 +00:00
CTLTYPE_INT|CTLFLAG_MPSAFE|CTLFLAG_RW, &lodirtybuffers,
__offsetof(struct bufdomain, bd_lodirtybuffers), sysctl_bufdomain_int, "I",
"How many buffers we want to have free before bufdaemon can sleep");
static int hidirtybuffers;
SYSCTL_PROC(_vfs, OID_AUTO, hidirtybuffers,
2018-03-21 23:21:32 +00:00
CTLTYPE_INT|CTLFLAG_MPSAFE|CTLFLAG_RW, &hidirtybuffers,
__offsetof(struct bufdomain, bd_hidirtybuffers), sysctl_bufdomain_int, "I",
"When the number of dirty buffers is considered severe");
int dirtybufthresh;
SYSCTL_PROC(_vfs, OID_AUTO, dirtybufthresh,
2018-03-21 23:21:32 +00:00
CTLTYPE_INT|CTLFLAG_MPSAFE|CTLFLAG_RW, &dirtybufthresh,
__offsetof(struct bufdomain, bd_dirtybufthresh), sysctl_bufdomain_int, "I",
"Number of bdwrite to bawrite conversions to clear dirty buffers");
static int numfreebuffers;
SYSCTL_INT(_vfs, OID_AUTO, numfreebuffers, CTLFLAG_RD, &numfreebuffers, 0,
"Number of free buffers");
static int lofreebuffers;
SYSCTL_PROC(_vfs, OID_AUTO, lofreebuffers,
2018-03-21 23:21:32 +00:00
CTLTYPE_INT|CTLFLAG_MPSAFE|CTLFLAG_RW, &lofreebuffers,
__offsetof(struct bufdomain, bd_lofreebuffers), sysctl_bufdomain_int, "I",
"Target number of free buffers");
static int hifreebuffers;
SYSCTL_PROC(_vfs, OID_AUTO, hifreebuffers,
2018-03-21 23:21:32 +00:00
CTLTYPE_INT|CTLFLAG_MPSAFE|CTLFLAG_RW, &hifreebuffers,
__offsetof(struct bufdomain, bd_hifreebuffers), sysctl_bufdomain_int, "I",
"Threshold for clean buffer recycling");
static counter_u64_t getnewbufcalls;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, getnewbufcalls, CTLFLAG_RD,
&getnewbufcalls, "Number of calls to getnewbuf");
static counter_u64_t getnewbufrestarts;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, getnewbufrestarts, CTLFLAG_RD,
&getnewbufrestarts,
"Number of times getnewbuf has had to restart a buffer acquisition");
static counter_u64_t mappingrestarts;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, mappingrestarts, CTLFLAG_RD,
&mappingrestarts,
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
"Number of times getblk has had to restart a buffer mapping for "
"unmapped buffer");
static counter_u64_t numbufallocfails;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, numbufallocfails, CTLFLAG_RW,
&numbufallocfails, "Number of times buffer allocations failed");
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
static int flushbufqtarget = 100;
SYSCTL_INT(_vfs, OID_AUTO, flushbufqtarget, CTLFLAG_RW, &flushbufqtarget, 0,
"Amount of work to do in flushbufqueues when helping bufdaemon");
static counter_u64_t notbufdflushes;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, notbufdflushes, CTLFLAG_RD, &notbufdflushes,
"Number of dirty buffer flushes done by the bufdaemon helpers");
static long barrierwrites;
SYSCTL_LONG(_vfs, OID_AUTO, barrierwrites, CTLFLAG_RW, &barrierwrites, 0,
"Number of barrier writes");
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
SYSCTL_INT(_vfs, OID_AUTO, unmapped_buf_allowed, CTLFLAG_RD,
&unmapped_buf_allowed, 0,
"Permit the use of the unmapped i/o");
int maxbcachebuf = MAXBCACHEBUF;
SYSCTL_INT(_vfs, OID_AUTO, maxbcachebuf, CTLFLAG_RDTUN, &maxbcachebuf, 0,
"Maximum size of a buffer cache block");
/*
* This lock synchronizes access to bd_request.
*/
static struct mtx_padalign __exclusive_cache_line bdlock;
/*
* This lock protects the runningbufreq and synchronizes runningbufwakeup and
* waitrunningbufspace().
*/
static struct mtx_padalign __exclusive_cache_line rbreqlock;
/*
* Lock that protects bdirtywait.
*/
static struct mtx_padalign __exclusive_cache_line bdirtylock;
/*
* Wakeup point for bufdaemon, as well as indicator of whether it is already
* active. Set to 1 when the bufdaemon is already "on" the queue, 0 when it
* is idling.
*/
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static int bd_request;
/*
* Request for the buf daemon to write more buffers than is indicated by
* lodirtybuf. This may be necessary to push out excess dependencies or
* defragment the address space where a simple count of the number of dirty
* buffers is insufficient to characterize the demand for flushing them.
*/
static int bd_speedupreq;
/*
* Synchronization (sleep/wakeup) variable for active buffer space requests.
* Set when wait starts, cleared prior to wakeup().
* Used in runningbufwakeup() and waitrunningbufspace().
*/
static int runningbufreq;
/*
* Synchronization for bwillwrite() waiters.
*/
static int bdirtywait;
/*
* Definitions for the buffer free lists.
*/
#define QUEUE_NONE 0 /* on no queue */
#define QUEUE_EMPTY 1 /* empty buffer headers */
#define QUEUE_DIRTY 2 /* B_DELWRI buffers */
#define QUEUE_CLEAN 3 /* non-B_DELWRI buffers */
#define QUEUE_SENTINEL 4 /* not an queue index, but mark for sentinel */
/* Maximum number of buffer domains. */
#define BUF_DOMAINS 8
struct bufdomainset bdlodirty; /* Domains > lodirty */
struct bufdomainset bdhidirty; /* Domains > hidirty */
/* Configured number of clean queues. */
static int __read_mostly buf_domains;
BITSET_DEFINE(bufdomainset, BUF_DOMAINS);
struct bufdomain __exclusive_cache_line bdomain[BUF_DOMAINS];
struct bufqueue __exclusive_cache_line bqempty;
/*
* per-cpu empty buffer cache.
*/
uma_zone_t buf_zone;
/*
* Single global constant for BUF_WMESG, to avoid getting multiple references.
* buf_wmesg is referred from macros.
*/
const char *buf_wmesg = BUF_WMESG;
static int
sysctl_runningspace(SYSCTL_HANDLER_ARGS)
{
long value;
int error;
value = *(long *)arg1;
error = sysctl_handle_long(oidp, &value, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
mtx_lock(&rbreqlock);
if (arg1 == &hirunningspace) {
if (value < lorunningspace)
error = EINVAL;
else
hirunningspace = value;
} else {
KASSERT(arg1 == &lorunningspace,
("%s: unknown arg1", __func__));
if (value > hirunningspace)
error = EINVAL;
else
lorunningspace = value;
}
mtx_unlock(&rbreqlock);
return (error);
}
static int
sysctl_bufdomain_int(SYSCTL_HANDLER_ARGS)
{
int error;
int value;
int i;
value = *(int *)arg1;
error = sysctl_handle_int(oidp, &value, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
*(int *)arg1 = value;
for (i = 0; i < buf_domains; i++)
*(int *)(uintptr_t)(((uintptr_t)&bdomain[i]) + arg2) =
value / buf_domains;
return (error);
}
static int
sysctl_bufdomain_long(SYSCTL_HANDLER_ARGS)
{
long value;
int error;
int i;
value = *(long *)arg1;
error = sysctl_handle_long(oidp, &value, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
*(long *)arg1 = value;
for (i = 0; i < buf_domains; i++)
*(long *)(uintptr_t)(((uintptr_t)&bdomain[i]) + arg2) =
value / buf_domains;
return (error);
}
#if defined(COMPAT_FREEBSD4) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD7)
static int
sysctl_bufspace(SYSCTL_HANDLER_ARGS)
{
long lvalue;
int ivalue;
int i;
lvalue = 0;
for (i = 0; i < buf_domains; i++)
lvalue += bdomain[i].bd_bufspace;
if (sizeof(int) == sizeof(long) || req->oldlen >= sizeof(long))
return (sysctl_handle_long(oidp, &lvalue, 0, req));
if (lvalue > INT_MAX)
/* On overflow, still write out a long to trigger ENOMEM. */
return (sysctl_handle_long(oidp, &lvalue, 0, req));
ivalue = lvalue;
return (sysctl_handle_int(oidp, &ivalue, 0, req));
}
#else
static int
sysctl_bufspace(SYSCTL_HANDLER_ARGS)
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
{
long lvalue;
int i;
2004-09-15 20:54:23 +00:00
lvalue = 0;
for (i = 0; i < buf_domains; i++)
lvalue += bdomain[i].bd_bufspace;
return (sysctl_handle_long(oidp, &lvalue, 0, req));
}
#endif
static int
sysctl_numdirtybuffers(SYSCTL_HANDLER_ARGS)
{
int value;
int i;
value = 0;
for (i = 0; i < buf_domains; i++)
value += bdomain[i].bd_numdirtybuffers;
return (sysctl_handle_int(oidp, &value, 0, req));
}
/*
* bdirtywakeup:
*
* Wakeup any bwillwrite() waiters.
*/
static void
bdirtywakeup(void)
{
mtx_lock(&bdirtylock);
if (bdirtywait) {
bdirtywait = 0;
wakeup(&bdirtywait);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
mtx_unlock(&bdirtylock);
}
/*
* bd_clear:
*
* Clear a domain from the appropriate bitsets when dirtybuffers
* is decremented.
*/
static void
bd_clear(struct bufdomain *bd)
{
mtx_lock(&bdirtylock);
if (bd->bd_numdirtybuffers <= bd->bd_lodirtybuffers)
BIT_CLR(BUF_DOMAINS, BD_DOMAIN(bd), &bdlodirty);
if (bd->bd_numdirtybuffers <= bd->bd_hidirtybuffers)
BIT_CLR(BUF_DOMAINS, BD_DOMAIN(bd), &bdhidirty);
mtx_unlock(&bdirtylock);
}
/*
* bd_set:
*
* Set a domain in the appropriate bitsets when dirtybuffers
* is incremented.
*/
static void
bd_set(struct bufdomain *bd)
{
mtx_lock(&bdirtylock);
if (bd->bd_numdirtybuffers > bd->bd_lodirtybuffers)
BIT_SET(BUF_DOMAINS, BD_DOMAIN(bd), &bdlodirty);
if (bd->bd_numdirtybuffers > bd->bd_hidirtybuffers)
BIT_SET(BUF_DOMAINS, BD_DOMAIN(bd), &bdhidirty);
mtx_unlock(&bdirtylock);
}
/*
* bdirtysub:
*
* Decrement the numdirtybuffers count by one and wakeup any
* threads blocked in bwillwrite().
*/
static void
bdirtysub(struct buf *bp)
{
struct bufdomain *bd;
int num;
bd = bufdomain(bp);
num = atomic_fetchadd_int(&bd->bd_numdirtybuffers, -1);
if (num == (bd->bd_lodirtybuffers + bd->bd_hidirtybuffers) / 2)
bdirtywakeup();
if (num == bd->bd_lodirtybuffers || num == bd->bd_hidirtybuffers)
bd_clear(bd);
}
/*
* bdirtyadd:
*
* Increment the numdirtybuffers count by one and wakeup the buf
* daemon if needed.
*/
static void
bdirtyadd(struct buf *bp)
{
struct bufdomain *bd;
int num;
/*
* Only do the wakeup once as we cross the boundary. The
* buf daemon will keep running until the condition clears.
*/
bd = bufdomain(bp);
num = atomic_fetchadd_int(&bd->bd_numdirtybuffers, 1);
if (num == (bd->bd_lodirtybuffers + bd->bd_hidirtybuffers) / 2)
bd_wakeup();
if (num == bd->bd_lodirtybuffers || num == bd->bd_hidirtybuffers)
bd_set(bd);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
/*
* bufspace_daemon_wakeup:
*
* Wakeup the daemons responsible for freeing clean bufs.
*/
static void
bufspace_daemon_wakeup(struct bufdomain *bd)
{
2004-09-15 20:54:23 +00:00
/*
* avoid the lock if the daemon is running.
*/
if (atomic_fetchadd_int(&bd->bd_running, 1) == 0) {
BD_RUN_LOCK(bd);
atomic_store_int(&bd->bd_running, 1);
wakeup(&bd->bd_running);
BD_RUN_UNLOCK(bd);
}
}
/*
* bufspace_daemon_wait:
*
* Sleep until the domain falls below a limit or one second passes.
*/
static void
bufspace_daemon_wait(struct bufdomain *bd)
{
/*
* Re-check our limits and sleep. bd_running must be
* cleared prior to checking the limits to avoid missed
* wakeups. The waker will adjust one of bufspace or
* freebuffers prior to checking bd_running.
*/
BD_RUN_LOCK(bd);
atomic_store_int(&bd->bd_running, 0);
if (bd->bd_bufspace < bd->bd_bufspacethresh &&
bd->bd_freebuffers > bd->bd_lofreebuffers) {
msleep(&bd->bd_running, BD_RUN_LOCKPTR(bd), PRIBIO|PDROP,
"-", hz);
} else {
/* Avoid spurious wakeups while running. */
atomic_store_int(&bd->bd_running, 1);
BD_RUN_UNLOCK(bd);
}
}
/*
* bufspace_adjust:
*
* Adjust the reported bufspace for a KVA managed buffer, possibly
* waking any waiters.
*/
static void
bufspace_adjust(struct buf *bp, int bufsize)
{
struct bufdomain *bd;
long space;
int diff;
KASSERT((bp->b_flags & B_MALLOC) == 0,
("bufspace_adjust: malloc buf %p", bp));
bd = bufdomain(bp);
diff = bufsize - bp->b_bufsize;
if (diff < 0) {
atomic_subtract_long(&bd->bd_bufspace, -diff);
} else if (diff > 0) {
space = atomic_fetchadd_long(&bd->bd_bufspace, diff);
/* Wake up the daemon on the transition. */
if (space < bd->bd_bufspacethresh &&
space + diff >= bd->bd_bufspacethresh)
bufspace_daemon_wakeup(bd);
}
bp->b_bufsize = bufsize;
}
/*
* bufspace_reserve:
*
* Reserve bufspace before calling allocbuf(). metadata has a
* different space limit than data.
*/
static int
bufspace_reserve(struct bufdomain *bd, int size, bool metadata)
{
long limit, new;
long space;
if (metadata)
limit = bd->bd_maxbufspace;
else
limit = bd->bd_hibufspace;
space = atomic_fetchadd_long(&bd->bd_bufspace, size);
new = space + size;
if (new > limit) {
atomic_subtract_long(&bd->bd_bufspace, size);
return (ENOSPC);
}
/* Wake up the daemon on the transition. */
if (space < bd->bd_bufspacethresh && new >= bd->bd_bufspacethresh)
bufspace_daemon_wakeup(bd);
return (0);
}
/*
* bufspace_release:
*
* Release reserved bufspace after bufspace_adjust() has consumed it.
*/
static void
bufspace_release(struct bufdomain *bd, int size)
{
atomic_subtract_long(&bd->bd_bufspace, size);
}
/*
* bufspace_wait:
*
* Wait for bufspace, acting as the buf daemon if a locked vnode is
* supplied. bd_wanted must be set prior to polling for space. The
* operation must be re-tried on return.
*/
static void
bufspace_wait(struct bufdomain *bd, struct vnode *vp, int gbflags,
int slpflag, int slptimeo)
{
struct thread *td;
int error, fl, norunbuf;
if ((gbflags & GB_NOWAIT_BD) != 0)
return;
td = curthread;
BD_LOCK(bd);
while (bd->bd_wanted) {
if (vp != NULL && vp->v_type != VCHR &&
(td->td_pflags & TDP_BUFNEED) == 0) {
BD_UNLOCK(bd);
/*
* getblk() is called with a vnode locked, and
* some majority of the dirty buffers may as
* well belong to the vnode. Flushing the
* buffers there would make a progress that
* cannot be achieved by the buf_daemon, that
* cannot lock the vnode.
*/
norunbuf = ~(TDP_BUFNEED | TDP_NORUNNINGBUF) |
(td->td_pflags & TDP_NORUNNINGBUF);
/*
* Play bufdaemon. The getnewbuf() function
* may be called while the thread owns lock
* for another dirty buffer for the same
* vnode, which makes it impossible to use
* VOP_FSYNC() there, due to the buffer lock
* recursion.
*/
td->td_pflags |= TDP_BUFNEED | TDP_NORUNNINGBUF;
fl = buf_flush(vp, bd, flushbufqtarget);
td->td_pflags &= norunbuf;
BD_LOCK(bd);
if (fl != 0)
continue;
if (bd->bd_wanted == 0)
break;
}
error = msleep(&bd->bd_wanted, BD_LOCKPTR(bd),
(PRIBIO + 4) | slpflag, "newbuf", slptimeo);
if (error != 0)
break;
}
BD_UNLOCK(bd);
}
/*
* bufspace_daemon:
*
* buffer space management daemon. Tries to maintain some marginal
* amount of free buffer space so that requesting processes neither
* block nor work to reclaim buffers.
*/
static void
bufspace_daemon(void *arg)
{
struct bufdomain *bd;
EVENTHANDLER_REGISTER(shutdown_pre_sync, kthread_shutdown, curthread,
SHUTDOWN_PRI_LAST + 100);
bd = arg;
for (;;) {
kthread_suspend_check();
/*
* Free buffers from the clean queue until we meet our
* targets.
*
* Theory of operation: The buffer cache is most efficient
* when some free buffer headers and space are always
* available to getnewbuf(). This daemon attempts to prevent
* the excessive blocking and synchronization associated
* with shortfall. It goes through three phases according
* demand:
*
* 1) The daemon wakes up voluntarily once per-second
* during idle periods when the counters are below
* the wakeup thresholds (bufspacethresh, lofreebuffers).
*
* 2) The daemon wakes up as we cross the thresholds
* ahead of any potential blocking. This may bounce
* slightly according to the rate of consumption and
* release.
*
* 3) The daemon and consumers are starved for working
* clean buffers. This is the 'bufspace' sleep below
* which will inefficiently trade bufs with bqrelse
* until we return to condition 2.
*/
while (bd->bd_bufspace > bd->bd_lobufspace ||
bd->bd_freebuffers < bd->bd_hifreebuffers) {
if (buf_recycle(bd, false) != 0) {
if (bd_flushall(bd))
continue;
/*
* Speedup dirty if we've run out of clean
* buffers. This is possible in particular
* because softdep may held many bufs locked
* pending writes to other bufs which are
* marked for delayed write, exhausting
* clean space until they are written.
*/
bd_speedup();
BD_LOCK(bd);
if (bd->bd_wanted) {
msleep(&bd->bd_wanted, BD_LOCKPTR(bd),
PRIBIO|PDROP, "bufspace", hz/10);
} else
BD_UNLOCK(bd);
}
maybe_yield();
}
bufspace_daemon_wait(bd);
}
}
/*
* bufmallocadjust:
*
* Adjust the reported bufspace for a malloc managed buffer, possibly
* waking any waiters.
*/
static void
bufmallocadjust(struct buf *bp, int bufsize)
{
int diff;
KASSERT((bp->b_flags & B_MALLOC) != 0,
("bufmallocadjust: non-malloc buf %p", bp));
diff = bufsize - bp->b_bufsize;
if (diff < 0)
atomic_subtract_long(&bufmallocspace, -diff);
else
atomic_add_long(&bufmallocspace, diff);
bp->b_bufsize = bufsize;
}
/*
* runningwakeup:
*
* Wake up processes that are waiting on asynchronous writes to fall
* below lorunningspace.
*/
static void
runningwakeup(void)
{
mtx_lock(&rbreqlock);
if (runningbufreq) {
runningbufreq = 0;
wakeup(&runningbufreq);
}
mtx_unlock(&rbreqlock);
}
/*
* runningbufwakeup:
*
* Decrement the outstanding write count according.
*/
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
void
runningbufwakeup(struct buf *bp)
{
long space, bspace;
2004-09-15 20:54:23 +00:00
bspace = bp->b_runningbufspace;
if (bspace == 0)
return;
space = atomic_fetchadd_long(&runningbufspace, -bspace);
KASSERT(space >= bspace, ("runningbufspace underflow %ld %ld",
space, bspace));
bp->b_runningbufspace = 0;
/*
* Only acquire the lock and wakeup on the transition from exceeding
* the threshold to falling below it.
*/
if (space < lorunningspace)
return;
if (space - bspace > lorunningspace)
return;
runningwakeup();
}
/*
* waitrunningbufspace()
*
* runningbufspace is a measure of the amount of I/O currently
* running. This routine is used in async-write situations to
* prevent creating huge backups of pending writes to a device.
* Only asynchronous writes are governed by this function.
*
* This does NOT turn an async write into a sync write. It waits
* for earlier writes to complete and generally returns before the
* caller's write has reached the device.
*/
void
waitrunningbufspace(void)
{
2004-09-15 20:54:23 +00:00
mtx_lock(&rbreqlock);
while (runningbufspace > hirunningspace) {
runningbufreq = 1;
msleep(&runningbufreq, &rbreqlock, PVM, "wdrain", 0);
}
mtx_unlock(&rbreqlock);
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* vfs_buf_test_cache:
*
* Called when a buffer is extended. This function clears the B_CACHE
* bit if the newly extended portion of the buffer does not contain
* valid data.
*/
static __inline void
vfs_buf_test_cache(struct buf *bp, vm_ooffset_t foff, vm_offset_t off,
vm_offset_t size, vm_page_t m)
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
{
2004-09-15 20:54:23 +00:00
VM_OBJECT_ASSERT_LOCKED(m->object);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if (bp->b_flags & B_CACHE) {
int base = (foff + off) & PAGE_MASK;
if (vm_page_is_valid(m, base, size) == 0)
bp->b_flags &= ~B_CACHE;
}
}
2007-03-25 10:07:23 +00:00
/* Wake up the buffer daemon if necessary */
static void
bd_wakeup(void)
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
{
2004-09-15 20:54:23 +00:00
mtx_lock(&bdlock);
if (bd_request == 0) {
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
bd_request = 1;
wakeup(&bd_request);
}
mtx_unlock(&bdlock);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
}
/*
* Adjust the maxbcachbuf tunable.
*/
static void
maxbcachebuf_adjust(void)
{
int i;
/*
* maxbcachebuf must be a power of 2 >= MAXBSIZE.
*/
i = 2;
while (i * 2 <= maxbcachebuf)
i *= 2;
maxbcachebuf = i;
if (maxbcachebuf < MAXBSIZE)
maxbcachebuf = MAXBSIZE;
if (maxbcachebuf > MAXPHYS)
maxbcachebuf = MAXPHYS;
if (bootverbose != 0 && maxbcachebuf != MAXBCACHEBUF)
printf("maxbcachebuf=%d\n", maxbcachebuf);
}
/*
* bd_speedup - speedup the buffer cache flushing code
*/
void
bd_speedup(void)
{
int needwake;
2004-09-15 20:54:23 +00:00
mtx_lock(&bdlock);
needwake = 0;
if (bd_speedupreq == 0 || bd_request == 0)
needwake = 1;
bd_speedupreq = 1;
bd_request = 1;
if (needwake)
wakeup(&bd_request);
mtx_unlock(&bdlock);
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
#ifdef __i386__
#define TRANSIENT_DENOM 5
#else
#define TRANSIENT_DENOM 10
#endif
1994-05-24 10:09:53 +00:00
/*
* Calculating buffer cache scaling values and reserve space for buffer
* headers. This is called during low level kernel initialization and
* may be called more then once. We CANNOT write to the memory area
* being reserved at this time.
1994-05-24 10:09:53 +00:00
*/
caddr_t
kern_vfs_bio_buffer_alloc(caddr_t v, long physmem_est)
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
{
int tuned_nbuf;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
long maxbuf, maxbuf_sz, buf_sz, biotmap_sz;
2004-09-15 20:54:23 +00:00
/*
* physmem_est is in pages. Convert it to kilobytes (assumes
* PAGE_SIZE is >= 1K)
*/
physmem_est = physmem_est * (PAGE_SIZE / 1024);
maxbcachebuf_adjust();
/*
* The nominal buffer size (and minimum KVA allocation) is BKVASIZE.
* For the first 64MB of ram nominally allocate sufficient buffers to
* cover 1/4 of our ram. Beyond the first 64MB allocate additional
* buffers to cover 1/10 of our ram over 64MB. When auto-sizing
* the buffer cache we limit the eventual kva reservation to
* maxbcache bytes.
*
* factor represents the 1/4 x ram conversion.
*/
if (nbuf == 0) {
int factor = 4 * BKVASIZE / 1024;
nbuf = 50;
if (physmem_est > 4096)
nbuf += min((physmem_est - 4096) / factor,
65536 / factor);
if (physmem_est > 65536)
nbuf += min((physmem_est - 65536) * 2 / (factor * 5),
32 * 1024 * 1024 / (factor * 5));
if (maxbcache && nbuf > maxbcache / BKVASIZE)
nbuf = maxbcache / BKVASIZE;
tuned_nbuf = 1;
} else
tuned_nbuf = 0;
/* XXX Avoid unsigned long overflows later on with maxbufspace. */
maxbuf = (LONG_MAX / 3) / BKVASIZE;
if (nbuf > maxbuf) {
if (!tuned_nbuf)
printf("Warning: nbufs lowered from %d to %ld\n", nbuf,
maxbuf);
nbuf = maxbuf;
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
2014-01-21 03:24:52 +00:00
* Ideal allocation size for the transient bio submap is 10%
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* of the maximal space buffer map. This roughly corresponds
* to the amount of the buffer mapped for typical UFS load.
*
* Clip the buffer map to reserve space for the transient
* BIOs, if its extent is bigger than 90% (80% on i386) of the
* maximum buffer map extent on the platform.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*
* The fall-back to the maxbuf in case of maxbcache unset,
* allows to not trim the buffer KVA for the architectures
* with ample KVA space.
*/
if (bio_transient_maxcnt == 0 && unmapped_buf_allowed) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
maxbuf_sz = maxbcache != 0 ? maxbcache : maxbuf * BKVASIZE;
buf_sz = (long)nbuf * BKVASIZE;
if (buf_sz < maxbuf_sz / TRANSIENT_DENOM *
(TRANSIENT_DENOM - 1)) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* There is more KVA than memory. Do not
* adjust buffer map size, and assign the rest
* of maxbuf to transient map.
*/
biotmap_sz = maxbuf_sz - buf_sz;
} else {
/*
* Buffer map spans all KVA we could afford on
* this platform. Give 10% (20% on i386) of
* the buffer map to the transient bio map.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*/
biotmap_sz = buf_sz / TRANSIENT_DENOM;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
buf_sz -= biotmap_sz;
}
if (biotmap_sz / INT_MAX > MAXPHYS)
bio_transient_maxcnt = INT_MAX;
else
bio_transient_maxcnt = biotmap_sz / MAXPHYS;
/*
* Artificially limit to 1024 simultaneous in-flight I/Os
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* using the transient mapping.
*/
if (bio_transient_maxcnt > 1024)
bio_transient_maxcnt = 1024;
if (tuned_nbuf)
nbuf = buf_sz / BKVASIZE;
}
if (nswbuf == 0) {
nswbuf = min(nbuf / 4, 256);
if (nswbuf < NSWBUF_MIN)
nswbuf = NSWBUF_MIN;
}
/*
* Reserve space for the buffer cache buffers
*/
buf = (void *)v;
v = (caddr_t)(buf + nbuf);
return(v);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
/* Initialize the buffer subsystem. Called before use of any buffers. */
void
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
bufinit(void)
1994-05-24 10:09:53 +00:00
{
struct buf *bp;
int i;
KASSERT(maxbcachebuf >= MAXBSIZE,
("maxbcachebuf (%d) must be >= MAXBSIZE (%d)\n", maxbcachebuf,
MAXBSIZE));
bq_init(&bqempty, QUEUE_EMPTY, -1, "bufq empty lock");
mtx_init(&rbreqlock, "runningbufspace lock", NULL, MTX_DEF);
mtx_init(&bdlock, "buffer daemon lock", NULL, MTX_DEF);
mtx_init(&bdirtylock, "dirty buf lock", NULL, MTX_DEF);
unmapped_buf = (caddr_t)kva_alloc(MAXPHYS);
/* finally, initialize each buffer header and stick on empty q */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (i = 0; i < nbuf; i++) {
1994-05-24 10:09:53 +00:00
bp = &buf[i];
bzero(bp, sizeof *bp);
bp->b_flags = B_INVAL;
1994-05-24 10:09:53 +00:00
bp->b_rcred = NOCRED;
bp->b_wcred = NOCRED;
bp->b_qindex = QUEUE_NONE;
bp->b_domain = -1;
bp->b_subqueue = mp_maxid + 1;
bp->b_xflags = 0;
bp->b_data = bp->b_kvabase = unmapped_buf;
LIST_INIT(&bp->b_dep);
BUF_LOCKINIT(bp);
bq_insert(&bqempty, bp, false);
1994-05-24 10:09:53 +00:00
}
/*
* maxbufspace is the absolute maximum amount of buffer space we are
* allowed to reserve in KVM and in real terms. The absolute maximum
* is nominally used by metadata. hibufspace is the nominal maximum
* used by most other requests. The differential is required to
* ensure that metadata deadlocks don't occur.
*
* maxbufspace is based on BKVASIZE. Allocating buffers larger then
* this may result in KVM fragmentation which is not handled optimally
* by the system. XXX This is less true with vmem. We could use
* PAGE_SIZE.
*/
maxbufspace = (long)nbuf * BKVASIZE;
hibufspace = lmax(3 * maxbufspace / 4, maxbufspace - maxbcachebuf * 10);
lobufspace = (hibufspace / 20) * 19; /* 95% */
bufspacethresh = lobufspace + (hibufspace - lobufspace) / 2;
/*
* Note: The 16 MiB upper limit for hirunningspace was chosen
* arbitrarily and may need further tuning. It corresponds to
* 128 outstanding write IO requests (if IO size is 128 KiB),
* which fits with many RAID controllers' tagged queuing limits.
* The lower 1 MiB limit is the historical upper limit for
* hirunningspace.
*/
hirunningspace = lmax(lmin(roundup(hibufspace / 64, maxbcachebuf),
2010-07-20 13:59:51 +00:00
16 * 1024 * 1024), 1024 * 1024);
lorunningspace = roundup((hirunningspace * 2) / 3, maxbcachebuf);
/*
* Limit the amount of malloc memory since it is wired permanently into
* the kernel space. Even though this is accounted for in the buffer
* allocation, we don't want the malloced region to grow uncontrolled.
* The malloc scheme improves memory utilization significantly on
* average (small) directories.
*/
maxbufmallocspace = hibufspace / 20;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* Reduce the chance of a deadlock occurring by limiting the number
* of delayed-write dirty buffers we allow to stack up.
*/
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
hidirtybuffers = nbuf / 4 + 20;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
dirtybufthresh = hidirtybuffers * 9 / 10;
/*
* To support extreme low-memory systems, make sure hidirtybuffers
* cannot eat up all available buffer space. This occurs when our
* minimum cannot be met. We try to size hidirtybuffers to 3/4 our
* buffer space assuming BKVASIZE'd buffers.
*/
while ((long)hidirtybuffers * BKVASIZE > 3 * hibufspace / 4) {
hidirtybuffers >>= 1;
}
lodirtybuffers = hidirtybuffers / 2;
/*
* lofreebuffers should be sufficient to avoid stalling waiting on
* buf headers under heavy utilization. The bufs in per-cpu caches
* are counted as free but will be unavailable to threads executing
* on other cpus.
*
* hifreebuffers is the free target for the bufspace daemon. This
* should be set appropriately to limit work per-iteration.
*/
lofreebuffers = MIN((nbuf / 25) + (20 * mp_ncpus), 128 * mp_ncpus);
hifreebuffers = (3 * lofreebuffers) / 2;
numfreebuffers = nbuf;
/* Setup the kva and free list allocators. */
vmem_set_reclaim(buffer_arena, bufkva_reclaim);
buf_zone = uma_zcache_create("buf free cache", sizeof(struct buf),
NULL, NULL, NULL, NULL, buf_import, buf_release, NULL, 0);
/*
* Size the clean queue according to the amount of buffer space.
* One queue per-256mb up to the max. More queues gives better
* concurrency but less accurate LRU.
*/
buf_domains = MIN(howmany(maxbufspace, 256*1024*1024), BUF_DOMAINS);
for (i = 0 ; i < buf_domains; i++) {
struct bufdomain *bd;
bd = &bdomain[i];
bd_init(bd);
bd->bd_freebuffers = nbuf / buf_domains;
bd->bd_hifreebuffers = hifreebuffers / buf_domains;
bd->bd_lofreebuffers = lofreebuffers / buf_domains;
bd->bd_bufspace = 0;
bd->bd_maxbufspace = maxbufspace / buf_domains;
bd->bd_hibufspace = hibufspace / buf_domains;
bd->bd_lobufspace = lobufspace / buf_domains;
bd->bd_bufspacethresh = bufspacethresh / buf_domains;
bd->bd_numdirtybuffers = 0;
bd->bd_hidirtybuffers = hidirtybuffers / buf_domains;
bd->bd_lodirtybuffers = lodirtybuffers / buf_domains;
bd->bd_dirtybufthresh = dirtybufthresh / buf_domains;
/* Don't allow more than 2% of bufs in the per-cpu caches. */
bd->bd_lim = nbuf / buf_domains / 50 / mp_ncpus;
}
getnewbufcalls = counter_u64_alloc(M_WAITOK);
getnewbufrestarts = counter_u64_alloc(M_WAITOK);
mappingrestarts = counter_u64_alloc(M_WAITOK);
numbufallocfails = counter_u64_alloc(M_WAITOK);
notbufdflushes = counter_u64_alloc(M_WAITOK);
buffreekvacnt = counter_u64_alloc(M_WAITOK);
bufdefragcnt = counter_u64_alloc(M_WAITOK);
bufkvaspace = counter_u64_alloc(M_WAITOK);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
#ifdef INVARIANTS
static inline void
vfs_buf_check_mapped(struct buf *bp)
{
KASSERT(bp->b_kvabase != unmapped_buf,
("mapped buf: b_kvabase was not updated %p", bp));
KASSERT(bp->b_data != unmapped_buf,
("mapped buf: b_data was not updated %p", bp));
KASSERT(bp->b_data < unmapped_buf || bp->b_data >= unmapped_buf +
MAXPHYS, ("b_data + b_offset unmapped %p", bp));
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
static inline void
vfs_buf_check_unmapped(struct buf *bp)
{
KASSERT(bp->b_data == unmapped_buf,
("unmapped buf: corrupted b_data %p", bp));
}
#define BUF_CHECK_MAPPED(bp) vfs_buf_check_mapped(bp)
#define BUF_CHECK_UNMAPPED(bp) vfs_buf_check_unmapped(bp)
#else
#define BUF_CHECK_MAPPED(bp) do {} while (0)
#define BUF_CHECK_UNMAPPED(bp) do {} while (0)
#endif
static int
isbufbusy(struct buf *bp)
{
if (((bp->b_flags & B_INVAL) == 0 && BUF_ISLOCKED(bp)) ||
((bp->b_flags & (B_DELWRI | B_INVAL)) == B_DELWRI))
return (1);
return (0);
}
/*
* Shutdown the system cleanly to prepare for reboot, halt, or power off.
*/
void
bufshutdown(int show_busybufs)
{
static int first_buf_printf = 1;
struct buf *bp;
int iter, nbusy, pbusy;
#ifndef PREEMPTION
int subiter;
#endif
/*
* Sync filesystems for shutdown
*/
wdog_kern_pat(WD_LASTVAL);
sys_sync(curthread, NULL);
/*
* With soft updates, some buffers that are
* written will be remarked as dirty until other
* buffers are written.
*/
for (iter = pbusy = 0; iter < 20; iter++) {
nbusy = 0;
for (bp = &buf[nbuf]; --bp >= buf; )
if (isbufbusy(bp))
nbusy++;
if (nbusy == 0) {
if (first_buf_printf)
printf("All buffers synced.");
break;
}
if (first_buf_printf) {
printf("Syncing disks, buffers remaining... ");
first_buf_printf = 0;
}
printf("%d ", nbusy);
if (nbusy < pbusy)
iter = 0;
pbusy = nbusy;
wdog_kern_pat(WD_LASTVAL);
sys_sync(curthread, NULL);
#ifdef PREEMPTION
/*
* Spin for a while to allow interrupt threads to run.
*/
DELAY(50000 * iter);
#else
/*
* Context switch several times to allow interrupt
* threads to run.
*/
for (subiter = 0; subiter < 50 * iter; subiter++) {
thread_lock(curthread);
mi_switch(SW_VOL, NULL);
thread_unlock(curthread);
DELAY(1000);
}
#endif
}
printf("\n");
/*
* Count only busy local buffers to prevent forcing
* a fsck if we're just a client of a wedged NFS server
*/
nbusy = 0;
for (bp = &buf[nbuf]; --bp >= buf; ) {
if (isbufbusy(bp)) {
#if 0
/* XXX: This is bogus. We should probably have a BO_REMOTE flag instead */
if (bp->b_dev == NULL) {
TAILQ_REMOVE(&mountlist,
bp->b_vp->v_mount, mnt_list);
continue;
}
#endif
nbusy++;
if (show_busybufs > 0) {
printf(
"%d: buf:%p, vnode:%p, flags:%0x, blkno:%jd, lblkno:%jd, buflock:",
nbusy, bp, bp->b_vp, bp->b_flags,
(intmax_t)bp->b_blkno,
(intmax_t)bp->b_lblkno);
BUF_LOCKPRINTINFO(bp);
if (show_busybufs > 1)
vn_printf(bp->b_vp,
"vnode content: ");
}
}
}
if (nbusy) {
/*
* Failed to sync all blocks. Indicate this and don't
* unmount filesystems (thus forcing an fsck on reboot).
*/
printf("Giving up on %d buffers\n", nbusy);
DELAY(5000000); /* 5 seconds */
} else {
if (!first_buf_printf)
printf("Final sync complete\n");
/*
* Unmount filesystems
*/
if (panicstr == NULL)
vfs_unmountall();
}
swapoff_all();
DELAY(100000); /* wait for console output to finish */
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
static void
bpmap_qenter(struct buf *bp)
{
BUF_CHECK_MAPPED(bp);
/*
* bp->b_data is relative to bp->b_offset, but
* bp->b_offset may be offset into the first page.
*/
bp->b_data = (caddr_t)trunc_page((vm_offset_t)bp->b_data);
pmap_qenter((vm_offset_t)bp->b_data, bp->b_pages, bp->b_npages);
bp->b_data = (caddr_t)((vm_offset_t)bp->b_data |
(vm_offset_t)(bp->b_offset & PAGE_MASK));
1994-05-24 10:09:53 +00:00
}
static inline struct bufdomain *
bufdomain(struct buf *bp)
{
return (&bdomain[bp->b_domain]);
}
static struct bufqueue *
bufqueue(struct buf *bp)
{
switch (bp->b_qindex) {
case QUEUE_NONE:
/* FALLTHROUGH */
case QUEUE_SENTINEL:
return (NULL);
case QUEUE_EMPTY:
return (&bqempty);
case QUEUE_DIRTY:
return (&bufdomain(bp)->bd_dirtyq);
case QUEUE_CLEAN:
return (&bufdomain(bp)->bd_subq[bp->b_subqueue]);
default:
break;
}
panic("bufqueue(%p): Unhandled type %d\n", bp, bp->b_qindex);
}
/*
* Return the locked bufqueue that bp is a member of.
*/
static struct bufqueue *
bufqueue_acquire(struct buf *bp)
{
struct bufqueue *bq, *nbq;
/*
* bp can be pushed from a per-cpu queue to the
* cleanq while we're waiting on the lock. Retry
* if the queues don't match.
*/
bq = bufqueue(bp);
BQ_LOCK(bq);
for (;;) {
nbq = bufqueue(bp);
if (bq == nbq)
break;
BQ_UNLOCK(bq);
BQ_LOCK(nbq);
bq = nbq;
}
return (bq);
}
/*
* binsfree:
*
* Insert the buffer into the appropriate free list. Requires a
* locked buffer on entry and buffer is unlocked before return.
*/
static void
binsfree(struct buf *bp, int qindex)
{
struct bufdomain *bd;
struct bufqueue *bq;
KASSERT(qindex == QUEUE_CLEAN || qindex == QUEUE_DIRTY,
("binsfree: Invalid qindex %d", qindex));
BUF_ASSERT_XLOCKED(bp);
/*
* Handle delayed bremfree() processing.
*/
if (bp->b_flags & B_REMFREE) {
if (bp->b_qindex == qindex) {
bp->b_flags |= B_REUSE;
bp->b_flags &= ~B_REMFREE;
BUF_UNLOCK(bp);
return;
}
bq = bufqueue_acquire(bp);
bq_remove(bq, bp);
BQ_UNLOCK(bq);
}
bd = bufdomain(bp);
if (qindex == QUEUE_CLEAN) {
if (bd->bd_lim != 0)
bq = &bd->bd_subq[PCPU_GET(cpuid)];
else
bq = bd->bd_cleanq;
} else
bq = &bd->bd_dirtyq;
bq_insert(bq, bp, true);
}
/*
* buf_free:
*
* Free a buffer to the buf zone once it no longer has valid contents.
*/
static void
buf_free(struct buf *bp)
{
if (bp->b_flags & B_REMFREE)
bremfreef(bp);
if (bp->b_vflags & BV_BKGRDINPROG)
panic("losing buffer 1");
if (bp->b_rcred != NOCRED) {
crfree(bp->b_rcred);
bp->b_rcred = NOCRED;
}
if (bp->b_wcred != NOCRED) {
crfree(bp->b_wcred);
bp->b_wcred = NOCRED;
}
if (!LIST_EMPTY(&bp->b_dep))
buf_deallocate(bp);
bufkva_free(bp);
atomic_add_int(&bufdomain(bp)->bd_freebuffers, 1);
BUF_UNLOCK(bp);
uma_zfree(buf_zone, bp);
}
/*
* buf_import:
*
* Import bufs into the uma cache from the buf list. The system still
* expects a static array of bufs and much of the synchronization
* around bufs assumes type stable storage. As a result, UMA is used
* only as a per-cpu cache of bufs still maintained on a global list.
*/
static int
buf_import(void *arg, void **store, int cnt, int domain, int flags)
{
struct buf *bp;
int i;
BQ_LOCK(&bqempty);
for (i = 0; i < cnt; i++) {
bp = TAILQ_FIRST(&bqempty.bq_queue);
if (bp == NULL)
break;
bq_remove(&bqempty, bp);
store[i] = bp;
}
BQ_UNLOCK(&bqempty);
return (i);
}
/*
* buf_release:
*
* Release bufs from the uma cache back to the buffer queues.
*/
static void
buf_release(void *arg, void **store, int cnt)
{
struct bufqueue *bq;
struct buf *bp;
int i;
bq = &bqempty;
BQ_LOCK(bq);
for (i = 0; i < cnt; i++) {
bp = store[i];
/* Inline bq_insert() to batch locking. */
TAILQ_INSERT_TAIL(&bq->bq_queue, bp, b_freelist);
bp->b_flags &= ~(B_AGE | B_REUSE);
bq->bq_len++;
bp->b_qindex = bq->bq_index;
}
BQ_UNLOCK(bq);
}
/*
* buf_alloc:
*
* Allocate an empty buffer header.
*/
static struct buf *
buf_alloc(struct bufdomain *bd)
{
struct buf *bp;
int freebufs;
/*
* We can only run out of bufs in the buf zone if the average buf
* is less than BKVASIZE. In this case the actual wait/block will
* come from buf_reycle() failing to flush one of these small bufs.
*/
bp = NULL;
freebufs = atomic_fetchadd_int(&bd->bd_freebuffers, -1);
if (freebufs > 0)
bp = uma_zalloc(buf_zone, M_NOWAIT);
if (bp == NULL) {
atomic_add_int(&bd->bd_freebuffers, 1);
bufspace_daemon_wakeup(bd);
counter_u64_add(numbufallocfails, 1);
return (NULL);
}
/*
* Wake-up the bufspace daemon on transition below threshold.
*/
if (freebufs == bd->bd_lofreebuffers)
bufspace_daemon_wakeup(bd);
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
panic("getnewbuf_empty: Locked buf %p on free queue.", bp);
KASSERT(bp->b_vp == NULL,
("bp: %p still has vnode %p.", bp, bp->b_vp));
KASSERT((bp->b_flags & (B_DELWRI | B_NOREUSE)) == 0,
("invalid buffer %p flags %#x", bp, bp->b_flags));
KASSERT((bp->b_xflags & (BX_VNCLEAN|BX_VNDIRTY)) == 0,
("bp: %p still on a buffer list. xflags %X", bp, bp->b_xflags));
KASSERT(bp->b_npages == 0,
("bp: %p still has %d vm pages\n", bp, bp->b_npages));
KASSERT(bp->b_kvasize == 0, ("bp: %p still has kva\n", bp));
KASSERT(bp->b_bufsize == 0, ("bp: %p still has bufspace\n", bp));
bp->b_domain = BD_DOMAIN(bd);
bp->b_flags = 0;
bp->b_ioflags = 0;
bp->b_xflags = 0;
bp->b_vflags = 0;
bp->b_vp = NULL;
bp->b_blkno = bp->b_lblkno = 0;
bp->b_offset = NOOFFSET;
bp->b_iodone = 0;
bp->b_error = 0;
bp->b_resid = 0;
bp->b_bcount = 0;
bp->b_npages = 0;
bp->b_dirtyoff = bp->b_dirtyend = 0;
bp->b_bufobj = NULL;
bp->b_data = bp->b_kvabase = unmapped_buf;
bp->b_fsprivate1 = NULL;
bp->b_fsprivate2 = NULL;
bp->b_fsprivate3 = NULL;
LIST_INIT(&bp->b_dep);
return (bp);
}
/*
* buf_recycle:
*
* Free a buffer from the given bufqueue. kva controls whether the
* freed buf must own some kva resources. This is used for
* defragmenting.
*/
static int
buf_recycle(struct bufdomain *bd, bool kva)
{
struct bufqueue *bq;
struct buf *bp, *nbp;
if (kva)
counter_u64_add(bufdefragcnt, 1);
nbp = NULL;
bq = bd->bd_cleanq;
BQ_LOCK(bq);
KASSERT(BQ_LOCKPTR(bq) == BD_LOCKPTR(bd),
("buf_recycle: Locks don't match"));
nbp = TAILQ_FIRST(&bq->bq_queue);
/*
* Run scan, possibly freeing data and/or kva mappings on the fly
* depending.
*/
while ((bp = nbp) != NULL) {
/*
* Calculate next bp (we can only use it if we do not
* release the bqlock).
*/
nbp = TAILQ_NEXT(bp, b_freelist);
/*
* If we are defragging then we need a buffer with
* some kva to reclaim.
*/
if (kva && bp->b_kvasize == 0)
continue;
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
continue;
/*
* Implement a second chance algorithm for frequently
* accessed buffers.
*/
if ((bp->b_flags & B_REUSE) != 0) {
TAILQ_REMOVE(&bq->bq_queue, bp, b_freelist);
TAILQ_INSERT_TAIL(&bq->bq_queue, bp, b_freelist);
bp->b_flags &= ~B_REUSE;
BUF_UNLOCK(bp);
continue;
}
/*
* Skip buffers with background writes in progress.
*/
if ((bp->b_vflags & BV_BKGRDINPROG) != 0) {
BUF_UNLOCK(bp);
continue;
}
KASSERT(bp->b_qindex == QUEUE_CLEAN,
("buf_recycle: inconsistent queue %d bp %p",
bp->b_qindex, bp));
KASSERT(bp->b_domain == BD_DOMAIN(bd),
("getnewbuf: queue domain %d doesn't match request %d",
bp->b_domain, (int)BD_DOMAIN(bd)));
/*
* NOTE: nbp is now entirely invalid. We can only restart
* the scan from this point on.
*/
bq_remove(bq, bp);
BQ_UNLOCK(bq);
/*
* Requeue the background write buffer with error and
* restart the scan.
*/
if ((bp->b_vflags & BV_BKGRDERR) != 0) {
bqrelse(bp);
BQ_LOCK(bq);
nbp = TAILQ_FIRST(&bq->bq_queue);
continue;
}
bp->b_flags |= B_INVAL;
brelse(bp);
return (0);
}
bd->bd_wanted = 1;
BQ_UNLOCK(bq);
return (ENOBUFS);
}
/*
* bremfree:
*
* Mark the buffer for removal from the appropriate free list.
*
*/
void
2004-09-15 20:54:23 +00:00
bremfree(struct buf *bp)
{
2004-09-15 20:54:23 +00:00
CTR3(KTR_BUF, "bremfree(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
KASSERT((bp->b_flags & B_REMFREE) == 0,
("bremfree: buffer %p already marked for delayed removal.", bp));
KASSERT(bp->b_qindex != QUEUE_NONE,
("bremfree: buffer %p not on a queue.", bp));
BUF_ASSERT_XLOCKED(bp);
bp->b_flags |= B_REMFREE;
}
/*
* bremfreef:
*
* Force an immediate removal from a free list. Used only in nfs when
* it abuses the b_freelist pointer.
*/
void
bremfreef(struct buf *bp)
{
struct bufqueue *bq;
bq = bufqueue_acquire(bp);
bq_remove(bq, bp);
BQ_UNLOCK(bq);
}
static void
bq_init(struct bufqueue *bq, int qindex, int subqueue, const char *lockname)
{
mtx_init(&bq->bq_lock, lockname, NULL, MTX_DEF);
TAILQ_INIT(&bq->bq_queue);
bq->bq_len = 0;
bq->bq_index = qindex;
bq->bq_subqueue = subqueue;
}
static void
bd_init(struct bufdomain *bd)
{
int i;
bd->bd_cleanq = &bd->bd_subq[mp_maxid + 1];
bq_init(bd->bd_cleanq, QUEUE_CLEAN, mp_maxid + 1, "bufq clean lock");
bq_init(&bd->bd_dirtyq, QUEUE_DIRTY, -1, "bufq dirty lock");
for (i = 0; i <= mp_maxid; i++)
bq_init(&bd->bd_subq[i], QUEUE_CLEAN, i,
"bufq clean subqueue lock");
mtx_init(&bd->bd_run_lock, "bufspace daemon run lock", NULL, MTX_DEF);
}
/*
* bq_remove:
*
* Removes a buffer from the free list, must be called with the
* correct qlock held.
*/
static void
bq_remove(struct bufqueue *bq, struct buf *bp)
1994-05-24 10:09:53 +00:00
{
CTR3(KTR_BUF, "bq_remove(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
KASSERT(bp->b_qindex != QUEUE_NONE,
("bq_remove: buffer %p not on a queue.", bp));
KASSERT(bufqueue(bp) == bq,
("bq_remove: Remove buffer %p from wrong queue.", bp));
BQ_ASSERT_LOCKED(bq);
if (bp->b_qindex != QUEUE_EMPTY) {
BUF_ASSERT_XLOCKED(bp);
}
KASSERT(bq->bq_len >= 1,
("queue %d underflow", bp->b_qindex));
TAILQ_REMOVE(&bq->bq_queue, bp, b_freelist);
bq->bq_len--;
bp->b_qindex = QUEUE_NONE;
bp->b_flags &= ~(B_REMFREE | B_REUSE);
}
static void
bd_flush(struct bufdomain *bd, struct bufqueue *bq)
{
struct buf *bp;
BQ_ASSERT_LOCKED(bq);
if (bq != bd->bd_cleanq) {
BD_LOCK(bd);
while ((bp = TAILQ_FIRST(&bq->bq_queue)) != NULL) {
TAILQ_REMOVE(&bq->bq_queue, bp, b_freelist);
TAILQ_INSERT_TAIL(&bd->bd_cleanq->bq_queue, bp,
b_freelist);
bp->b_subqueue = bd->bd_cleanq->bq_subqueue;
}
bd->bd_cleanq->bq_len += bq->bq_len;
bq->bq_len = 0;
}
if (bd->bd_wanted) {
bd->bd_wanted = 0;
wakeup(&bd->bd_wanted);
}
if (bq != bd->bd_cleanq)
BD_UNLOCK(bd);
}
static int
bd_flushall(struct bufdomain *bd)
{
struct bufqueue *bq;
int flushed;
int i;
if (bd->bd_lim == 0)
return (0);
flushed = 0;
for (i = 0; i <= mp_maxid; i++) {
bq = &bd->bd_subq[i];
if (bq->bq_len == 0)
continue;
BQ_LOCK(bq);
bd_flush(bd, bq);
BQ_UNLOCK(bq);
flushed++;
}
return (flushed);
}
static void
bq_insert(struct bufqueue *bq, struct buf *bp, bool unlock)
{
struct bufdomain *bd;
if (bp->b_qindex != QUEUE_NONE)
panic("bq_insert: free buffer %p onto another queue?", bp);
bd = bufdomain(bp);
if (bp->b_flags & B_AGE) {
/* Place this buf directly on the real queue. */
if (bq->bq_index == QUEUE_CLEAN)
bq = bd->bd_cleanq;
BQ_LOCK(bq);
TAILQ_INSERT_HEAD(&bq->bq_queue, bp, b_freelist);
} else {
BQ_LOCK(bq);
TAILQ_INSERT_TAIL(&bq->bq_queue, bp, b_freelist);
}
bp->b_flags &= ~(B_AGE | B_REUSE);
bq->bq_len++;
bp->b_qindex = bq->bq_index;
bp->b_subqueue = bq->bq_subqueue;
/*
* Unlock before we notify so that we don't wakeup a waiter that
* fails a trylock on the buf and sleeps again.
*/
if (unlock)
BUF_UNLOCK(bp);
if (bp->b_qindex == QUEUE_CLEAN) {
/*
* Flush the per-cpu queue and notify any waiters.
*/
if (bd->bd_wanted || (bq != bd->bd_cleanq &&
bq->bq_len >= bd->bd_lim))
bd_flush(bd, bq);
}
BQ_UNLOCK(bq);
}
1994-05-24 10:09:53 +00:00
/*
* bufkva_free:
*
* Free the kva allocation for a buffer.
*
*/
static void
bufkva_free(struct buf *bp)
{
#ifdef INVARIANTS
if (bp->b_kvasize == 0) {
KASSERT(bp->b_kvabase == unmapped_buf &&
bp->b_data == unmapped_buf,
("Leaked KVA space on %p", bp));
} else if (buf_mapped(bp))
BUF_CHECK_MAPPED(bp);
else
BUF_CHECK_UNMAPPED(bp);
#endif
if (bp->b_kvasize == 0)
return;
vmem_free(buffer_arena, (vm_offset_t)bp->b_kvabase, bp->b_kvasize);
counter_u64_add(bufkvaspace, -bp->b_kvasize);
counter_u64_add(buffreekvacnt, 1);
bp->b_data = bp->b_kvabase = unmapped_buf;
bp->b_kvasize = 0;
}
/*
* bufkva_alloc:
*
* Allocate the buffer KVA and set b_kvasize and b_kvabase.
*/
static int
bufkva_alloc(struct buf *bp, int maxsize, int gbflags)
{
vm_offset_t addr;
int error;
KASSERT((gbflags & GB_UNMAPPED) == 0 || (gbflags & GB_KVAALLOC) != 0,
("Invalid gbflags 0x%x in %s", gbflags, __func__));
bufkva_free(bp);
addr = 0;
error = vmem_alloc(buffer_arena, maxsize, M_BESTFIT | M_NOWAIT, &addr);
if (error != 0) {
/*
* Buffer map is too fragmented. Request the caller
* to defragment the map.
*/
return (error);
}
bp->b_kvabase = (caddr_t)addr;
bp->b_kvasize = maxsize;
counter_u64_add(bufkvaspace, bp->b_kvasize);
if ((gbflags & GB_UNMAPPED) != 0) {
bp->b_data = unmapped_buf;
BUF_CHECK_UNMAPPED(bp);
} else {
bp->b_data = bp->b_kvabase;
BUF_CHECK_MAPPED(bp);
}
return (0);
}
/*
* bufkva_reclaim:
*
* Reclaim buffer kva by freeing buffers holding kva. This is a vmem
* callback that fires to avoid returning failure.
*/
static void
bufkva_reclaim(vmem_t *vmem, int flags)
{
bool done;
int q;
int i;
done = false;
for (i = 0; i < 5; i++) {
for (q = 0; q < buf_domains; q++)
if (buf_recycle(&bdomain[q], true) != 0)
done = true;
if (done)
break;
}
return;
}
/*
* Attempt to initiate asynchronous I/O on read-ahead blocks. We must
* clear BIO_ERROR and B_INVAL prior to initiating I/O . If B_CACHE is set,
* the buffer is valid and we do not have to do anything.
*/
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
static void
breada(struct vnode * vp, daddr_t * rablkno, int * rabsize, int cnt,
struct ucred * cred, int flags, void (*ckhashfunc)(struct buf *))
{
struct buf *rabp;
struct thread *td;
int i;
td = curthread;
for (i = 0; i < cnt; i++, rablkno++, rabsize++) {
if (inmem(vp, *rablkno))
continue;
rabp = getblk(vp, *rablkno, *rabsize, 0, 0, 0);
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
if ((rabp->b_flags & B_CACHE) != 0) {
brelse(rabp);
continue;
}
#ifdef RACCT
if (racct_enable) {
PROC_LOCK(curproc);
racct_add_buf(curproc, rabp, 0);
PROC_UNLOCK(curproc);
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
}
#endif /* RACCT */
td->td_ru.ru_inblock++;
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
rabp->b_flags |= B_ASYNC;
rabp->b_flags &= ~B_INVAL;
if ((flags & GB_CKHASH) != 0) {
rabp->b_flags |= B_CKHASH;
rabp->b_ckhashcalc = ckhashfunc;
}
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
rabp->b_ioflags &= ~BIO_ERROR;
rabp->b_iocmd = BIO_READ;
if (rabp->b_rcred == NOCRED && cred != NOCRED)
rabp->b_rcred = crhold(cred);
vfs_busy_pages(rabp, 0);
BUF_KERNPROC(rabp);
rabp->b_iooffset = dbtob(rabp->b_blkno);
bstrategy(rabp);
}
}
/*
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
* Entry point for bread() and breadn() via #defines in sys/buf.h.
*
* Get a buffer with the specified data. Look in the cache first. We
* must clear BIO_ERROR and B_INVAL prior to initiating I/O. If B_CACHE
* is set, the buffer is valid and we do not have to do anything, see
* getblk(). Also starts asynchronous I/O on read-ahead blocks.
*
* Always return a NULL buffer pointer (in bpp) when returning an error.
*/
int
breadn_flags(struct vnode *vp, daddr_t blkno, int size, daddr_t *rablkno,
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
int *rabsize, int cnt, struct ucred *cred, int flags,
void (*ckhashfunc)(struct buf *), struct buf **bpp)
1994-05-24 10:09:53 +00:00
{
struct buf *bp;
struct thread *td;
int error, readwait, rv;
CTR3(KTR_BUF, "breadn(%p, %jd, %d)", vp, blkno, size);
td = curthread;
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
/*
* Can only return NULL if GB_LOCK_NOWAIT or GB_SPARSE flags
* are specified.
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
*/
error = getblkx(vp, blkno, size, 0, 0, flags, &bp);
if (error != 0) {
*bpp = NULL;
return (error);
}
flags &= ~GB_NOSPARSE;
*bpp = bp;
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
/*
* If not found in cache, do some I/O
*/
readwait = 0;
if ((bp->b_flags & B_CACHE) == 0) {
#ifdef RACCT
if (racct_enable) {
PROC_LOCK(td->td_proc);
racct_add_buf(td->td_proc, bp, 0);
PROC_UNLOCK(td->td_proc);
}
#endif /* RACCT */
td->td_ru.ru_inblock++;
bp->b_iocmd = BIO_READ;
bp->b_flags &= ~B_INVAL;
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
if ((flags & GB_CKHASH) != 0) {
bp->b_flags |= B_CKHASH;
bp->b_ckhashcalc = ckhashfunc;
}
bp->b_ioflags &= ~BIO_ERROR;
if (bp->b_rcred == NOCRED && cred != NOCRED)
bp->b_rcred = crhold(cred);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vfs_busy_pages(bp, 0);
bp->b_iooffset = dbtob(bp->b_blkno);
bstrategy(bp);
++readwait;
}
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
/*
* Attempt to initiate asynchronous I/O on read-ahead blocks.
*/
breada(vp, rablkno, rabsize, cnt, cred, flags, ckhashfunc);
1994-05-24 10:09:53 +00:00
Continuing efforts to provide hardening of FFS, this change adds a check hash to cylinder groups. If a check hash fails when a cylinder group is read, no further allocations are attempted in that cylinder group until it has been fixed by fsck. This avoids a class of filesystem panics related to corrupted cylinder group maps. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Specifics of the changes: sys/sys/buf.h: Add BX_FSPRIV to reserve a set of eight b_xflags that may be used by individual filesystems for their own purpose. Their specific definitions are found in the header files for each filesystem that uses them. Also add fields to struct buf as noted below. sys/kern/vfs_bio.c: It is only necessary to compute a check hash for a cylinder group when it is actually read from disk. When calling bread, you do not know whether the buffer was found in the cache or read. So a new flag (GB_CKHASH) and a pointer to a function to perform the hash has been added to breadn_flags to say that the function should be called to calculate a hash if the data has been read. The check hash is placed in b_ckhash and the B_CKHASH flag is set to indicate that a read was done and a check hash calculated. Though a rather elaborate mechanism, it should also work for check hashing other metadata in the future. A kernel internal API change was to change breada into a static fucntion and add flags and a function pointer to a check-hash function. sys/ufs/ffs/fs.h: Add flags for types of check hashes; stored in a new word in the superblock. Define corresponding BX_ flags for the different types of check hashes. Add a check hash word in the cylinder group. sys/ufs/ffs/ffs_alloc.c: In ffs_getcg do the dance with breadn_flags to get a check hash and if one is provided, check it. sys/ufs/ffs/ffs_vfsops.c: Copy across the BX_FFSTYPES flags in background writes. Update the check hash when writing out buffers that need them. sys/ufs/ffs/ffs_snapshot.c: Recompute check hash when updating snapshot cylinder groups. sys/libkern/crc32.c: lib/libufs/Makefile: lib/libufs/libufs.h: lib/libufs/cgroup.c: Include libkern/crc32.c in libufs and use it to compute check hashes when updating cylinder groups. Four utilities are affected: sbin/newfs/mkfs.c: Add the check hashes when building the cylinder groups. sbin/fsck_ffs/fsck.h: sbin/fsck_ffs/fsutil.c: Verify and update check hashes when checking and writing cylinder groups. sbin/fsck_ffs/pass5.c: Offer to add check hashes to existing filesystems. Precompute check hashes when rebuilding cylinder group (although this will be done when it is written in fsutil.c it is necessary to do it early before comparing with the old cylinder group) sbin/dumpfs/dumpfs.c Print out the new check hash flag(s) sbin/fsdb/Makefile: Needs to add libufs now used by pass5.c imported from fsck_ffs. Reviewed by: kib Tested by: Peter Holm (pho)
2017-09-22 12:45:15 +00:00
rv = 0;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (readwait) {
rv = bufwait(bp);
if (rv != 0) {
brelse(bp);
*bpp = NULL;
}
}
return (rv);
1994-05-24 10:09:53 +00:00
}
/*
* Write, release buffer on completion. (Done by iodone
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* if async). Do not bother writing anything if the buffer
* is invalid.
*
* Note that we set B_CACHE here, indicating that buffer is
* fully valid and thus cacheable. This is true even of NFS
* now so we set it generally. This could be set either here
* or in biodone() since the I/O is synchronous. We put it
* here.
*/
int
bufwrite(struct buf *bp)
1994-05-24 10:09:53 +00:00
{
int oldflags;
struct vnode *vp;
long space;
int vp_md;
CTR3(KTR_BUF, "bufwrite(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
if ((bp->b_bufobj->bo_flag & BO_DEAD) != 0) {
bp->b_flags |= B_INVAL | B_RELBUF;
bp->b_flags &= ~B_CACHE;
brelse(bp);
return (ENXIO);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_INVAL) {
brelse(bp);
return (0);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
if (bp->b_flags & B_BARRIER)
atomic_add_long(&barrierwrites, 1);
oldflags = bp->b_flags;
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
KASSERT(!(bp->b_vflags & BV_BKGRDINPROG),
("FFS background buffer should not get here %p", bp));
vp = bp->b_vp;
if (vp)
vp_md = vp->v_vflag & VV_MD;
else
vp_md = 0;
/*
* Mark the buffer clean. Increment the bufobj write count
* before bundirty() call, to prevent other thread from seeing
* empty dirty list and zero counter for writes in progress,
* falsely indicating that the bufobj is clean.
*/
bufobj_wref(bp->b_bufobj);
bundirty(bp);
bp->b_flags &= ~B_DONE;
bp->b_ioflags &= ~BIO_ERROR;
2004-09-15 21:49:22 +00:00
bp->b_flags |= B_CACHE;
bp->b_iocmd = BIO_WRITE;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vfs_busy_pages(bp, 1);
/*
* Normal bwrites pipeline writes
*/
bp->b_runningbufspace = bp->b_bufsize;
space = atomic_fetchadd_long(&runningbufspace, bp->b_runningbufspace);
#ifdef RACCT
if (racct_enable) {
PROC_LOCK(curproc);
racct_add_buf(curproc, bp, 1);
PROC_UNLOCK(curproc);
}
#endif /* RACCT */
curthread->td_ru.ru_oublock++;
if (oldflags & B_ASYNC)
BUF_KERNPROC(bp);
bp->b_iooffset = dbtob(bp->b_blkno);
buf_track(bp, __func__);
bstrategy(bp);
if ((oldflags & B_ASYNC) == 0) {
int rtval = bufwait(bp);
brelse(bp);
return (rtval);
} else if (space > hirunningspace) {
/*
* don't allow the async write to saturate the I/O
* system. We will not deadlock here because
* we are blocking waiting for I/O that is already in-progress
* to complete. We do not block here if it is the update
* or syncer daemon trying to clean up as that can lead
* to deadlock.
*/
if ((curthread->td_pflags & TDP_NORUNNINGBUF) == 0 && !vp_md)
waitrunningbufspace();
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
1994-05-24 10:09:53 +00:00
return (0);
}
void
bufbdflush(struct bufobj *bo, struct buf *bp)
{
struct buf *nbp;
if (bo->bo_dirty.bv_cnt > dirtybufthresh + 10) {
(void) VOP_FSYNC(bp->b_vp, MNT_NOWAIT, curthread);
altbufferflushes++;
} else if (bo->bo_dirty.bv_cnt > dirtybufthresh) {
BO_LOCK(bo);
/*
* Try to find a buffer to flush.
*/
TAILQ_FOREACH(nbp, &bo->bo_dirty.bv_hd, b_bobufs) {
if ((nbp->b_vflags & BV_BKGRDINPROG) ||
BUF_LOCK(nbp,
LK_EXCLUSIVE | LK_NOWAIT, NULL))
continue;
if (bp == nbp)
panic("bdwrite: found ourselves");
BO_UNLOCK(bo);
/* Don't countdeps with the bo lock held. */
if (buf_countdeps(nbp, 0)) {
BO_LOCK(bo);
BUF_UNLOCK(nbp);
continue;
}
if (nbp->b_flags & B_CLUSTEROK) {
vfs_bio_awrite(nbp);
} else {
bremfree(nbp);
bawrite(nbp);
}
dirtybufferflushes++;
break;
}
if (nbp == NULL)
BO_UNLOCK(bo);
}
}
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Delayed write. (Buffer is marked dirty). Do not bother writing
* anything if the buffer is marked invalid.
*
* Note that since the buffer must be completely valid, we can safely
* set B_CACHE. In fact, we have to set B_CACHE here rather then in
* biodone() in order to prevent getblk from writing the buffer
* out synchronously.
*/
void
2004-09-15 20:54:23 +00:00
bdwrite(struct buf *bp)
1994-05-24 10:09:53 +00:00
{
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
struct thread *td = curthread;
struct vnode *vp;
struct bufobj *bo;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
CTR3(KTR_BUF, "bdwrite(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
KASSERT((bp->b_flags & B_BARRIER) == 0,
("Barrier request in delayed write %p", bp));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_INVAL) {
brelse(bp);
return;
}
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
/*
* If we have too many dirty buffers, don't create any more.
* If we are wildly over our limit, then force a complete
* cleanup. Otherwise, just keep the situation from getting
* out of control. Note that we have to avoid a recursive
* disaster and not try to clean up after our own cleanup!
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
*/
vp = bp->b_vp;
bo = bp->b_bufobj;
if ((td->td_pflags & (TDP_COWINPROGRESS|TDP_INBDFLUSH)) == 0) {
td->td_pflags |= TDP_INBDFLUSH;
BO_BDFLUSH(bo, bp);
td->td_pflags &= ~TDP_INBDFLUSH;
} else
recursiveflushes++;
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
bdirty(bp);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set B_CACHE, indicating that the buffer is fully valid. This is
* true even of NFS now.
*/
bp->b_flags |= B_CACHE;
/*
* This bmap keeps the system from needing to do the bmap later,
* perhaps when the system is attempting to do a sync. Since it
* is likely that the indirect block -- or whatever other datastructure
* that the filesystem needs is still in memory now, it is a good
* thing to do this. Note also, that if the pageout daemon is
* requesting a sync -- there might not be enough memory to do
* the bmap then... So, this is important to do.
*/
Prevent large files from monopolizing the system buffers. Keep track of the number of dirty buffers held by a vnode. When a bdwrite is done on a buffer, check the existing number of dirty buffers associated with its vnode. If the number rises above vfs.dirtybufthresh (currently 90% of vfs.hidirtybuffers), one of the other (hopefully older) dirty buffers associated with the vnode is written (using bawrite). In the event that this approach fails to curb the growth in it the vnode's number of dirty buffers (due to soft updates rollback dependencies), the more drastic approach of doing a VOP_FSYNC on the vnode is used. This code primarily affects very large and actively written files such as snapshots. This change should eliminate hanging when taking snapshots or doing background fsck on very large filesystems. Hopefully, one day it will be possible to cache filesystem metadata in the VM cache as is done with file data. As it stands, only the buffer cache can be used which limits total metadata storage to about 20Mb no matter how much memory is available on the system. This rather small memory gets badly thrashed causing a lot of extra I/O. For example, taking a snapshot of a 1Tb filesystem minimally requires about 35,000 write operations, but because of the cache thrashing (we only have about 350 buffers at our disposal) ends up doing about 237,540 I/O's thus taking twenty-five minutes instead of four if it could run entirely in the cache. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-25 06:44:42 +00:00
if (vp->v_type != VCHR && bp->b_lblkno == bp->b_blkno) {
VOP_BMAP(vp, bp->b_lblkno, NULL, &bp->b_blkno, NULL, NULL);
}
buf_track(bp, __func__);
/*
* Set the *dirty* buffer range based upon the VM system dirty
* pages.
*
* Mark the buffer pages as clean. We need to do this here to
* satisfy the vnode_pager and the pageout daemon, so that it
* thinks that the pages have been "cleaned". Note that since
* the pages are in a delayed write buffer -- the VFS layer
* "will" see that the pages get written out on the next sync,
* or perhaps the cluster will be completed.
*/
vfs_clean_pages_dirty_buf(bp);
bqrelse(bp);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
* note: we cannot initiate I/O from a bdwrite even if we wanted to,
* due to the softdep code.
*/
1994-05-24 10:09:53 +00:00
}
/*
* bdirty:
*
* Turn buffer into delayed write request. We must clear BIO_READ and
* B_RELBUF, and we must set B_DELWRI. We reassign the buffer to
* itself to properly update it in the dirty/clean lists. We mark it
* B_DONE to ensure that any asynchronization of the buffer properly
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* clears B_DONE ( else a panic will occur later ).
*
* bdirty() is kinda like bdwrite() - we have to clear B_INVAL which
* might have been set pre-getblk(). Unlike bwrite/bdwrite, bdirty()
* should only be called if the buffer is known-good.
*
* Since the buffer is not on a queue, we do not update the numfreebuffers
* count.
*
* The buffer must be on QUEUE_NONE.
*/
void
2004-09-15 20:54:23 +00:00
bdirty(struct buf *bp)
{
2004-09-15 20:54:23 +00:00
CTR3(KTR_BUF, "bdirty(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
KASSERT(bp->b_flags & B_REMFREE || bp->b_qindex == QUEUE_NONE,
("bdirty: buffer %p still on queue %d", bp, bp->b_qindex));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
bp->b_flags &= ~(B_RELBUF);
bp->b_iocmd = BIO_WRITE;
if ((bp->b_flags & B_DELWRI) == 0) {
bp->b_flags |= /* XXX B_DONE | */ B_DELWRI;
reassignbuf(bp);
bdirtyadd(bp);
}
}
/*
* bundirty:
*
* Clear B_DELWRI for buffer.
*
* Since the buffer is not on a queue, we do not update the numfreebuffers
* count.
*
* The buffer must be on QUEUE_NONE.
*/
void
2004-09-15 20:54:23 +00:00
bundirty(struct buf *bp)
{
2004-09-15 20:54:23 +00:00
CTR3(KTR_BUF, "bundirty(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
KASSERT(bp->b_flags & B_REMFREE || bp->b_qindex == QUEUE_NONE,
("bundirty: buffer %p still on queue %d", bp, bp->b_qindex));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
if (bp->b_flags & B_DELWRI) {
bp->b_flags &= ~B_DELWRI;
reassignbuf(bp);
bdirtysub(bp);
}
/*
* Since it is now being written, we can clear its deferred write flag.
*/
bp->b_flags &= ~B_DEFERRED;
}
/*
* bawrite:
*
* Asynchronous write. Start output on a buffer, but do not wait for
* it to complete. The buffer is released when the output completes.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* bwrite() ( or the VOP routine anyway ) is responsible for handling
* B_INVAL buffers. Not us.
*/
void
2004-09-15 20:54:23 +00:00
bawrite(struct buf *bp)
1994-05-24 10:09:53 +00:00
{
2004-09-15 20:54:23 +00:00
bp->b_flags |= B_ASYNC;
(void) bwrite(bp);
1994-05-24 10:09:53 +00:00
}
/*
* babarrierwrite:
*
* Asynchronous barrier write. Start output on a buffer, but do not
* wait for it to complete. Place a write barrier after this write so
* that this buffer and all buffers written before it are committed to
* the disk before any buffers written after this write are committed
* to the disk. The buffer is released when the output completes.
*/
void
babarrierwrite(struct buf *bp)
{
bp->b_flags |= B_ASYNC | B_BARRIER;
(void) bwrite(bp);
}
/*
* bbarrierwrite:
*
* Synchronous barrier write. Start output on a buffer and wait for
* it to complete. Place a write barrier after this write so that
* this buffer and all buffers written before it are committed to
* the disk before any buffers written after this write are committed
* to the disk. The buffer is released when the output completes.
*/
int
bbarrierwrite(struct buf *bp)
{
bp->b_flags |= B_BARRIER;
return (bwrite(bp));
}
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
* bwillwrite:
*
* Called prior to the locking of any vnodes when we are expecting to
* write. We do not want to starve the buffer cache with too many
* dirty buffers so we block here. By blocking prior to the locking
* of any vnodes we attempt to avoid the situation where a locked vnode
* prevents the various system daemons from flushing related buffers.
*/
void
bwillwrite(void)
{
2004-09-15 20:54:23 +00:00
if (buf_dirty_count_severe()) {
mtx_lock(&bdirtylock);
while (buf_dirty_count_severe()) {
bdirtywait = 1;
msleep(&bdirtywait, &bdirtylock, (PRIBIO + 4),
"flswai", 0);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
mtx_unlock(&bdirtylock);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
}
}
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
* Return true if we have too many dirty buffers.
*/
int
buf_dirty_count_severe(void)
{
2004-09-15 20:54:23 +00:00
return (!BIT_EMPTY(BUF_DOMAINS, &bdhidirty));
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
}
/*
* brelse:
*
* Release a busy buffer and, if requested, free its resources. The
* buffer will be stashed in the appropriate bufqueue[] allowing it
* to be accessed later as a cache entity or reused for other purposes.
*/
void
2004-09-15 20:54:23 +00:00
brelse(struct buf *bp)
1994-05-24 10:09:53 +00:00
{
struct mount *v_mnt;
int qindex;
/*
2016-02-07 16:18:12 +00:00
* Many functions erroneously call brelse with a NULL bp under rare
* error conditions. Simply return when called with a NULL bp.
*/
if (bp == NULL)
return;
CTR3(KTR_BUF, "brelse(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)),
("brelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
KASSERT((bp->b_flags & B_VMIO) != 0 || (bp->b_flags & B_NOREUSE) == 0,
("brelse: non-VMIO buffer marked NOREUSE"));
2013-02-27 18:17:34 +00:00
if (BUF_LOCKRECURSED(bp)) {
/*
* Do not process, in particular, do not handle the
* B_INVAL/B_RELBUF and do not release to free list.
*/
BUF_UNLOCK(bp);
return;
}
if (bp->b_flags & B_MANAGED) {
bqrelse(bp);
return;
}
if ((bp->b_vflags & (BV_BKGRDINPROG | BV_BKGRDERR)) == BV_BKGRDERR) {
BO_LOCK(bp->b_bufobj);
bp->b_vflags &= ~BV_BKGRDERR;
BO_UNLOCK(bp->b_bufobj);
bdirty(bp);
}
if (bp->b_iocmd == BIO_WRITE && (bp->b_ioflags & BIO_ERROR) &&
(bp->b_error != ENXIO || !LIST_EMPTY(&bp->b_dep)) &&
!(bp->b_flags & B_INVAL)) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Failed write, redirty. All errors except ENXIO (which
* means the device is gone) are treated as being
* transient.
*
* XXX Treating EIO as transient is not correct; the
* contract with the local storage device drivers is that
* they will only return EIO once the I/O is no longer
* retriable. Network I/O also respects this through the
* guarantees of TCP and/or the internal retries of NFS.
* ENOMEM might be transient, but we also have no way of
* knowing when its ok to retry/reschedule. In general,
* this entire case should be made obsolete through better
* error handling/recovery and resource scheduling.
*
* Do this also for buffers that failed with ENXIO, but have
* non-empty dependencies - the soft updates code might need
* to access the buffer to untangle them.
*
* Must clear BIO_ERROR to prevent pages from being scrapped.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
bp->b_ioflags &= ~BIO_ERROR;
bdirty(bp);
} else if ((bp->b_flags & (B_NOCACHE | B_INVAL)) ||
(bp->b_ioflags & BIO_ERROR) || (bp->b_bufsize <= 0)) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Either a failed read I/O, or we were asked to free or not
* cache the buffer, or we failed to write to a device that's
* no longer present.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
bp->b_flags |= B_INVAL;
if (!LIST_EMPTY(&bp->b_dep))
buf_deallocate(bp);
if (bp->b_flags & B_DELWRI)
bdirtysub(bp);
bp->b_flags &= ~(B_DELWRI | B_CACHE);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
if ((bp->b_flags & B_VMIO) == 0) {
allocbuf(bp, 0);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
if (bp->b_vp)
brelvp(bp);
}
}
1995-05-30 08:16:23 +00:00
/*
* We must clear B_RELBUF if B_DELWRI is set. If vfs_vmio_truncate()
* is called with B_DELWRI set, the underlying pages may wind up
* getting freed causing a previous write (bdwrite()) to get 'lost'
* because pages associated with a B_DELWRI bp are marked clean.
*
* We still allow the B_INVAL case to call vfs_vmio_truncate(), even
* if B_DELWRI is set.
*/
if (bp->b_flags & B_DELWRI)
bp->b_flags &= ~B_RELBUF;
/*
* VMIO buffer rundown. It is not very necessary to keep a VMIO buffer
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* constituted, not even NFS buffers now. Two flags effect this. If
* B_INVAL, the struct buf is invalidated but the VM object is kept
* around ( i.e. so it is trivial to reconstitute the buffer later ).
*
* If BIO_ERROR or B_NOCACHE is set, pages in the VM object will be
* invalidated. BIO_ERROR cannot be set for a failed write unless the
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* buffer is also B_INVAL because it hits the re-dirtying code above.
*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Normally we can do this whether a buffer is B_DELWRI or not. If
* the buffer is an NFS buffer, it is tracking piecemeal writes or
* the commit state and we cannot afford to lose the buffer. If the
* buffer has a background write in progress, we need to keep it
* around to prevent it from being reconstituted and starting a second
* background write.
*/
v_mnt = bp->b_vp != NULL ? bp->b_vp->v_mount : NULL;
if ((bp->b_flags & B_VMIO) && (bp->b_flags & B_NOCACHE ||
(bp->b_ioflags & BIO_ERROR && bp->b_iocmd == BIO_READ)) &&
(v_mnt == NULL || (v_mnt->mnt_vfc->vfc_flags & VFCF_NETWORK) == 0 ||
vn_isdisk(bp->b_vp, NULL) || (bp->b_flags & B_DELWRI) == 0)) {
vfs_vmio_invalidate(bp);
allocbuf(bp, 0);
}
if ((bp->b_flags & (B_INVAL | B_RELBUF)) != 0 ||
(bp->b_flags & (B_DELWRI | B_NOREUSE)) == B_NOREUSE) {
allocbuf(bp, 0);
bp->b_flags &= ~B_NOREUSE;
if (bp->b_vp != NULL)
brelvp(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
* If the buffer has junk contents signal it and eventually
* clean up B_DELWRI and diassociate the vnode so that gbincore()
* doesn't find it.
*/
if (bp->b_bufsize == 0 || (bp->b_ioflags & BIO_ERROR) != 0 ||
(bp->b_flags & (B_INVAL | B_NOCACHE | B_RELBUF)) != 0)
bp->b_flags |= B_INVAL;
if (bp->b_flags & B_INVAL) {
if (bp->b_flags & B_DELWRI)
bundirty(bp);
if (bp->b_vp)
brelvp(bp);
}
buf_track(bp, __func__);
/* buffers with no memory */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_bufsize == 0) {
buf_free(bp);
return;
}
/* buffers with junk contents */
if (bp->b_flags & (B_INVAL | B_NOCACHE | B_RELBUF) ||
(bp->b_ioflags & BIO_ERROR)) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
bp->b_xflags &= ~(BX_BKGRDWRITE | BX_ALTDATA);
if (bp->b_vflags & BV_BKGRDINPROG)
panic("losing buffer 2");
qindex = QUEUE_CLEAN;
bp->b_flags |= B_AGE;
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
/* remaining buffers */
} else if (bp->b_flags & B_DELWRI)
qindex = QUEUE_DIRTY;
else
qindex = QUEUE_CLEAN;
if ((bp->b_flags & B_DELWRI) == 0 && (bp->b_xflags & BX_VNDIRTY))
panic("brelse: not dirty");
bp->b_flags &= ~(B_ASYNC | B_NOCACHE | B_RELBUF | B_DIRECT);
/* binsfree unlocks bp. */
binsfree(bp, qindex);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
* Release a buffer back to the appropriate queue but do not try to free
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
* it. The buffer is expected to be used again soon.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* bqrelse() is used by bdwrite() to requeue a delayed write, and used by
* biodone() to requeue an async I/O on completion. It is also used when
* known good buffers need to be requeued but we think we may need the data
* again soon.
*
* XXX we should be able to leave the B_RELBUF hint set on completion.
*/
void
2004-09-15 20:54:23 +00:00
bqrelse(struct buf *bp)
{
int qindex;
CTR3(KTR_BUF, "bqrelse(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
2004-09-15 20:54:23 +00:00
KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)),
("bqrelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
qindex = QUEUE_NONE;
if (BUF_LOCKRECURSED(bp)) {
/* do not release to free list */
BUF_UNLOCK(bp);
return;
}
bp->b_flags &= ~(B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF);
if (bp->b_flags & B_MANAGED) {
if (bp->b_flags & B_REMFREE)
bremfreef(bp);
goto out;
}
/* buffers with stale but valid contents */
if ((bp->b_flags & B_DELWRI) != 0 || (bp->b_vflags & (BV_BKGRDINPROG |
BV_BKGRDERR)) == BV_BKGRDERR) {
BO_LOCK(bp->b_bufobj);
bp->b_vflags &= ~BV_BKGRDERR;
BO_UNLOCK(bp->b_bufobj);
qindex = QUEUE_DIRTY;
} else {
if ((bp->b_flags & B_DELWRI) == 0 &&
(bp->b_xflags & BX_VNDIRTY))
panic("bqrelse: not dirty");
if ((bp->b_flags & B_NOREUSE) != 0) {
brelse(bp);
return;
}
qindex = QUEUE_CLEAN;
}
buf_track(bp, __func__);
/* binsfree unlocks bp. */
binsfree(bp, qindex);
return;
out:
buf_track(bp, __func__);
/* unlock */
BUF_UNLOCK(bp);
}
/*
* Complete I/O to a VMIO backed page. Validate the pages as appropriate,
* restore bogus pages.
*/
static void
vfs_vmio_iodone(struct buf *bp)
{
vm_ooffset_t foff;
vm_page_t m;
vm_object_t obj;
struct vnode *vp __unused;
int i, iosize, resid;
bool bogus;
obj = bp->b_bufobj->bo_object;
KASSERT(obj->paging_in_progress >= bp->b_npages,
("vfs_vmio_iodone: paging in progress(%d) < b_npages(%d)",
obj->paging_in_progress, bp->b_npages));
vp = bp->b_vp;
KASSERT(vp->v_holdcnt > 0,
("vfs_vmio_iodone: vnode %p has zero hold count", vp));
KASSERT(vp->v_object != NULL,
("vfs_vmio_iodone: vnode %p has no vm_object", vp));
foff = bp->b_offset;
KASSERT(bp->b_offset != NOOFFSET,
("vfs_vmio_iodone: bp %p has no buffer offset", bp));
bogus = false;
iosize = bp->b_bcount - bp->b_resid;
VM_OBJECT_WLOCK(obj);
for (i = 0; i < bp->b_npages; i++) {
resid = ((foff + PAGE_SIZE) & ~(off_t)PAGE_MASK) - foff;
if (resid > iosize)
resid = iosize;
/*
* cleanup bogus pages, restoring the originals
*/
m = bp->b_pages[i];
if (m == bogus_page) {
bogus = true;
m = vm_page_lookup(obj, OFF_TO_IDX(foff));
if (m == NULL)
panic("biodone: page disappeared!");
bp->b_pages[i] = m;
} else if ((bp->b_iocmd == BIO_READ) && resid > 0) {
/*
* In the write case, the valid and clean bits are
* already changed correctly ( see bdwrite() ), so we
* only need to do this here in the read case.
*/
KASSERT((m->dirty & vm_page_bits(foff & PAGE_MASK,
resid)) == 0, ("vfs_vmio_iodone: page %p "
"has unexpected dirty bits", m));
vfs_page_set_valid(bp, foff, m);
}
KASSERT(OFF_TO_IDX(foff) == m->pindex,
("vfs_vmio_iodone: foff(%jd)/pindex(%ju) mismatch",
(intmax_t)foff, (uintmax_t)m->pindex));
vm_page_sunbusy(m);
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
iosize -= resid;
}
vm_object_pip_wakeupn(obj, bp->b_npages);
VM_OBJECT_WUNLOCK(obj);
if (bogus && buf_mapped(bp)) {
BUF_CHECK_MAPPED(bp);
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
}
}
/*
* Unwire a page held by a buf and either free it or update the page queues to
* reflect its recent use.
*/
static void
vfs_vmio_unwire(struct buf *bp, vm_page_t m)
{
bool freed;
vm_page_lock(m);
if (vm_page_unwire_noq(m)) {
if ((bp->b_flags & B_DIRECT) != 0)
freed = vm_page_try_to_free(m);
else
freed = false;
if (!freed) {
/*
* Use a racy check of the valid bits to determine
* whether we can accelerate reclamation of the page.
* The valid bits will be stable unless the page is
* being mapped or is referenced by multiple buffers,
* and in those cases we expect races to be rare. At
* worst we will either accelerate reclamation of a
* valid page and violate LRU, or unnecessarily defer
* reclamation of an invalid page.
*
* The B_NOREUSE flag marks data that is not expected to
* be reused, so accelerate reclamation in that case
* too. Otherwise, maintain LRU.
*/
if (m->valid == 0 || (bp->b_flags & B_NOREUSE) != 0)
vm_page_deactivate_noreuse(m);
else if (vm_page_active(m))
vm_page_reference(m);
else
vm_page_deactivate(m);
}
}
vm_page_unlock(m);
}
/*
* Perform page invalidation when a buffer is released. The fully invalid
* pages will be reclaimed later in vfs_vmio_truncate().
*/
static void
vfs_vmio_invalidate(struct buf *bp)
{
vm_object_t obj;
vm_page_t m;
int i, resid, poffset, presid;
if (buf_mapped(bp)) {
BUF_CHECK_MAPPED(bp);
pmap_qremove(trunc_page((vm_offset_t)bp->b_data), bp->b_npages);
} else
BUF_CHECK_UNMAPPED(bp);
/*
* Get the base offset and length of the buffer. Note that
* in the VMIO case if the buffer block size is not
* page-aligned then b_data pointer may not be page-aligned.
* But our b_pages[] array *IS* page aligned.
*
* block sizes less then DEV_BSIZE (usually 512) are not
* supported due to the page granularity bits (m->valid,
* m->dirty, etc...).
*
* See man buf(9) for more information
*/
obj = bp->b_bufobj->bo_object;
resid = bp->b_bufsize;
poffset = bp->b_offset & PAGE_MASK;
VM_OBJECT_WLOCK(obj);
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
if (m == bogus_page)
panic("vfs_vmio_invalidate: Unexpected bogus page.");
bp->b_pages[i] = NULL;
presid = resid > (PAGE_SIZE - poffset) ?
(PAGE_SIZE - poffset) : resid;
KASSERT(presid >= 0, ("brelse: extra page"));
while (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(obj);
Fix a race in vm_page_busy_sleep(9). Suppose that we have an exclusively busy page, and a thread which can accept shared-busy page. In this case, typical code waiting for the page xbusy state to pass is again: VM_OBJECT_WLOCK(object); ... if (vm_page_xbusied(m)) { vm_page_lock(m); VM_OBJECT_WUNLOCK(object); <---1 vm_page_busy_sleep(p, "vmopax"); goto again; } Suppose that the xbusy state owner locked the object, unbusied the page and unlocked the object after we are at the line [1], but before we executed the load of the busy_lock word in vm_page_busy_sleep(). If it happens that there is still no waiters recorded for the busy state, the xbusy owner did not acquired the page lock, so it proceeded. More, suppose that some other thread happen to share-busy the page after xbusy state was relinquished but before the m->busy_lock is read in vm_page_busy_sleep(). Again, that thread only needs vm_object lock to proceed. Then, vm_page_busy_sleep() reads busy_lock value equal to the VPB_SHARERS_WORD(1). In this case, all tests in vm_page_busy_sleep(9) pass and we are going to sleep, despite the page being share-busied. Update check for m->busy_lock == VPB_UNBUSIED in vm_page_busy_sleep(9) to also accept shared-busy state if we only wait for the xbusy state to pass. Merge sequential if()s with the same 'then' clause in vm_page_busy_sleep(). Note that the current code does not share-busy pages from parallel threads, the only way to have more that one sbusy owner is right now is to recurse. Reported and tested by: pho (previous version) Reviewed by: alc, markj Sponsored by: The FreeBSD Foundation MFC after: 1 week Differential revision: https://reviews.freebsd.org/D8196
2016-10-13 14:41:05 +00:00
vm_page_busy_sleep(m, "mbncsh", true);
VM_OBJECT_WLOCK(obj);
}
if (pmap_page_wired_mappings(m) == 0)
vm_page_set_invalid(m, poffset, presid);
vfs_vmio_unwire(bp, m);
resid -= presid;
poffset = 0;
}
VM_OBJECT_WUNLOCK(obj);
bp->b_npages = 0;
}
/*
* Page-granular truncation of an existing VMIO buffer.
*/
static void
vfs_vmio_truncate(struct buf *bp, int desiredpages)
{
vm_object_t obj;
vm_page_t m;
int i;
if (bp->b_npages == desiredpages)
return;
if (buf_mapped(bp)) {
BUF_CHECK_MAPPED(bp);
pmap_qremove((vm_offset_t)trunc_page((vm_offset_t)bp->b_data) +
(desiredpages << PAGE_SHIFT), bp->b_npages - desiredpages);
} else
BUF_CHECK_UNMAPPED(bp);
/*
* The object lock is needed only if we will attempt to free pages.
*/
obj = (bp->b_flags & B_DIRECT) != 0 ? bp->b_bufobj->bo_object : NULL;
if (obj != NULL)
VM_OBJECT_WLOCK(obj);
for (i = desiredpages; i < bp->b_npages; i++) {
m = bp->b_pages[i];
KASSERT(m != bogus_page, ("allocbuf: bogus page found"));
bp->b_pages[i] = NULL;
vfs_vmio_unwire(bp, m);
}
if (obj != NULL)
VM_OBJECT_WUNLOCK(obj);
bp->b_npages = desiredpages;
}
/*
* Byte granular extension of VMIO buffers.
*/
static void
vfs_vmio_extend(struct buf *bp, int desiredpages, int size)
{
/*
* We are growing the buffer, possibly in a
* byte-granular fashion.
*/
vm_object_t obj;
vm_offset_t toff;
vm_offset_t tinc;
vm_page_t m;
/*
* Step 1, bring in the VM pages from the object, allocating
* them if necessary. We must clear B_CACHE if these pages
* are not valid for the range covered by the buffer.
*/
obj = bp->b_bufobj->bo_object;
VM_OBJECT_WLOCK(obj);
if (bp->b_npages < desiredpages) {
/*
* We must allocate system pages since blocking
* here could interfere with paging I/O, no
* matter which process we are.
*
* Only exclusive busy can be tested here.
* Blocking on shared busy might lead to
* deadlocks once allocbuf() is called after
* pages are vfs_busy_pages().
*/
(void)vm_page_grab_pages(obj,
OFF_TO_IDX(bp->b_offset) + bp->b_npages,
VM_ALLOC_SYSTEM | VM_ALLOC_IGN_SBUSY |
VM_ALLOC_NOBUSY | VM_ALLOC_WIRED,
&bp->b_pages[bp->b_npages], desiredpages - bp->b_npages);
bp->b_npages = desiredpages;
}
/*
* Step 2. We've loaded the pages into the buffer,
* we have to figure out if we can still have B_CACHE
* set. Note that B_CACHE is set according to the
* byte-granular range ( bcount and size ), not the
* aligned range ( newbsize ).
*
* The VM test is against m->valid, which is DEV_BSIZE
* aligned. Needless to say, the validity of the data
* needs to also be DEV_BSIZE aligned. Note that this
* fails with NFS if the server or some other client
* extends the file's EOF. If our buffer is resized,
* B_CACHE may remain set! XXX
*/
toff = bp->b_bcount;
tinc = PAGE_SIZE - ((bp->b_offset + toff) & PAGE_MASK);
while ((bp->b_flags & B_CACHE) && toff < size) {
vm_pindex_t pi;
if (tinc > (size - toff))
tinc = size - toff;
pi = ((bp->b_offset & PAGE_MASK) + toff) >> PAGE_SHIFT;
m = bp->b_pages[pi];
vfs_buf_test_cache(bp, bp->b_offset, toff, tinc, m);
toff += tinc;
tinc = PAGE_SIZE;
}
VM_OBJECT_WUNLOCK(obj);
/*
* Step 3, fixup the KVA pmap.
*/
if (buf_mapped(bp))
bpmap_qenter(bp);
else
BUF_CHECK_UNMAPPED(bp);
}
/*
* Check to see if a block at a particular lbn is available for a clustered
* write.
*/
static int
vfs_bio_clcheck(struct vnode *vp, int size, daddr_t lblkno, daddr_t blkno)
{
struct buf *bpa;
int match;
match = 0;
/* If the buf isn't in core skip it */
if ((bpa = gbincore(&vp->v_bufobj, lblkno)) == NULL)
return (0);
/* If the buf is busy we don't want to wait for it */
if (BUF_LOCK(bpa, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
return (0);
/* Only cluster with valid clusterable delayed write buffers */
if ((bpa->b_flags & (B_DELWRI | B_CLUSTEROK | B_INVAL)) !=
(B_DELWRI | B_CLUSTEROK))
goto done;
if (bpa->b_bufsize != size)
goto done;
/*
* Check to see if it is in the expected place on disk and that the
* block has been mapped.
*/
if ((bpa->b_blkno != bpa->b_lblkno) && (bpa->b_blkno == blkno))
match = 1;
done:
BUF_UNLOCK(bpa);
return (match);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
* vfs_bio_awrite:
*
* Implement clustered async writes for clearing out B_DELWRI buffers.
* This is much better then the old way of writing only one buffer at
* a time. Note that we may not be presented with the buffers in the
* correct order, so we search for the cluster in both directions.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
int
2004-09-15 20:54:23 +00:00
vfs_bio_awrite(struct buf *bp)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
struct bufobj *bo;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int i;
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
int j;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
daddr_t lblkno = bp->b_lblkno;
struct vnode *vp = bp->b_vp;
int ncl;
int nwritten;
int size;
int maxcl;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
int gbflags;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bo = &vp->v_bufobj;
gbflags = (bp->b_data == unmapped_buf) ? GB_UNMAPPED : 0;
/*
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
* right now we support clustered writing only to regular files. If
* we find a clusterable block we could be in the middle of a cluster
* rather then at the beginning.
*/
if ((vp->v_type == VREG) &&
(vp->v_mount != 0) && /* Only on nodes that have the size info */
1995-08-24 13:28:16 +00:00
(bp->b_flags & (B_CLUSTEROK | B_INVAL)) == B_CLUSTEROK) {
size = vp->v_mount->mnt_stat.f_iosize;
maxcl = MAXPHYS / size;
BO_RLOCK(bo);
for (i = 1; i < maxcl; i++)
if (vfs_bio_clcheck(vp, size, lblkno + i,
bp->b_blkno + ((i * size) >> DEV_BSHIFT)) == 0)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
break;
for (j = 1; i + j <= maxcl && j <= lblkno; j++)
if (vfs_bio_clcheck(vp, size, lblkno - j,
bp->b_blkno - ((j * size) >> DEV_BSHIFT)) == 0)
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
break;
BO_RUNLOCK(bo);
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
--j;
ncl = i + j;
/*
* this is a possible cluster write
*/
if (ncl != 1) {
BUF_UNLOCK(bp);
nwritten = cluster_wbuild(vp, size, lblkno - j, ncl,
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
gbflags);
return (nwritten);
}
}
bremfree(bp);
bp->b_flags |= B_ASYNC;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* default (old) behavior, writing out only one block
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* XXX returns b_bufsize instead of b_bcount for nwritten?
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
nwritten = bp->b_bufsize;
(void) bwrite(bp);
return (nwritten);
1994-05-24 10:09:53 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* getnewbuf_kva:
*
* Allocate KVA for an empty buf header according to gbflags.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*/
static int
getnewbuf_kva(struct buf *bp, int gbflags, int maxsize)
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
{
if ((gbflags & (GB_UNMAPPED | GB_KVAALLOC)) != GB_UNMAPPED) {
/*
* In order to keep fragmentation sane we only allocate kva
* in BKVASIZE chunks. XXX with vmem we can do page size.
*/
maxsize = (maxsize + BKVAMASK) & ~BKVAMASK;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (maxsize != bp->b_kvasize &&
bufkva_alloc(bp, maxsize, gbflags))
return (ENOSPC);
}
return (0);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
/*
* getnewbuf:
*
* Find and initialize a new buffer header, freeing up existing buffers
* in the bufqueues as necessary. The new buffer is returned locked.
*
* We block if:
* We have insufficient buffer headers
* We have insufficient buffer space
* buffer_arena is too fragmented ( space reservation fails )
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
* If we have to flush dirty buffers ( but we try to avoid this )
*
* The caller is responsible for releasing the reserved bufspace after
* allocbuf() is called.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*/
static struct buf *
getnewbuf(struct vnode *vp, int slpflag, int slptimeo, int maxsize, int gbflags)
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
{
struct bufdomain *bd;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
struct buf *bp;
bool metadata, reserved;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
bp = NULL;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
KASSERT((gbflags & (GB_UNMAPPED | GB_KVAALLOC)) != GB_KVAALLOC,
("GB_KVAALLOC only makes sense with GB_UNMAPPED"));
if (!unmapped_buf_allowed)
gbflags &= ~(GB_UNMAPPED | GB_KVAALLOC);
if (vp == NULL || (vp->v_vflag & (VV_MD | VV_SYSTEM)) != 0 ||
vp->v_type == VCHR)
metadata = true;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
else
metadata = false;
if (vp == NULL)
bd = &bdomain[0];
else
bd = &bdomain[vp->v_bufobj.bo_domain];
counter_u64_add(getnewbufcalls, 1);
reserved = false;
do {
if (reserved == false &&
bufspace_reserve(bd, maxsize, metadata) != 0) {
counter_u64_add(getnewbufrestarts, 1);
continue;
}
reserved = true;
if ((bp = buf_alloc(bd)) == NULL) {
counter_u64_add(getnewbufrestarts, 1);
continue;
}
if (getnewbuf_kva(bp, gbflags, maxsize) == 0)
return (bp);
break;
} while (buf_recycle(bd, false) == 0);
if (reserved)
bufspace_release(bd, maxsize);
if (bp != NULL) {
bp->b_flags |= B_INVAL;
brelse(bp);
}
bufspace_wait(bd, vp, gbflags, slpflag, slptimeo);
return (NULL);
1994-05-24 10:09:53 +00:00
}
/*
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* buf_daemon:
*
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
* buffer flushing daemon. Buffers are normally flushed by the
* update daemon but if it cannot keep up this process starts to
* take the load in an attempt to prevent getnewbuf() from blocking.
*/
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static struct kproc_desc buf_kp = {
"bufdaemon",
buf_daemon,
&bufdaemonproc
};
SYSINIT(bufdaemon, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &buf_kp);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
static int
buf_flush(struct vnode *vp, struct bufdomain *bd, int target)
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
{
int flushed;
flushed = flushbufqueues(vp, bd, target, 0);
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
if (flushed == 0) {
/*
* Could not find any buffers without rollback
* dependencies, so just write the first one
* in the hopes of eventually making progress.
*/
if (vp != NULL && target > 2)
target /= 2;
flushbufqueues(vp, bd, target, 1);
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
}
return (flushed);
}
static void
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
buf_daemon()
{
struct bufdomain *bd;
int speedupreq;
int lodirty;
int i;
/*
* This process needs to be suspended prior to shutdown sync.
*/
EVENTHANDLER_REGISTER(shutdown_pre_sync, kthread_shutdown, curthread,
SHUTDOWN_PRI_LAST + 100);
/*
* Start the buf clean daemons as children threads.
*/
for (i = 0 ; i < buf_domains; i++) {
int error;
error = kthread_add((void (*)(void *))bufspace_daemon,
&bdomain[i], curproc, NULL, 0, 0, "bufspacedaemon-%d", i);
if (error)
panic("error %d spawning bufspace daemon", error);
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
/*
* This process is allowed to take the buffer cache to the limit
*/
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
curthread->td_pflags |= TDP_NORUNNINGBUF | TDP_BUFNEED;
mtx_lock(&bdlock);
for (;;) {
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
bd_request = 0;
mtx_unlock(&bdlock);
kthread_suspend_check();
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
/*
* Save speedupreq for this pass and reset to capture new
* requests.
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
*/
speedupreq = bd_speedupreq;
bd_speedupreq = 0;
/*
* Flush each domain sequentially according to its level and
* the speedup request.
*/
for (i = 0; i < buf_domains; i++) {
bd = &bdomain[i];
if (speedupreq)
lodirty = bd->bd_numdirtybuffers / 2;
else
lodirty = bd->bd_lodirtybuffers;
while (bd->bd_numdirtybuffers > lodirty) {
if (buf_flush(NULL, bd,
bd->bd_numdirtybuffers - lodirty) == 0)
break;
kern_yield(PRI_USER);
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
}
/*
* Only clear bd_request if we have reached our low water
* mark. The buf_daemon normally waits 1 second and
* then incrementally flushes any dirty buffers that have
* built up, within reason.
*
* If we were unable to hit our low water mark and couldn't
* find any flushable buffers, we sleep for a short period
* to avoid endless loops on unlockable buffers.
*/
mtx_lock(&bdlock);
if (!BIT_EMPTY(BUF_DOMAINS, &bdlodirty)) {
/*
* We reached our low water mark, reset the
* request and sleep until we are needed again.
* The sleep is just so the suspend code works.
*/
bd_request = 0;
/*
* Do an extra wakeup in case dirty threshold
* changed via sysctl and the explicit transition
* out of shortfall was missed.
*/
bdirtywakeup();
if (runningbufspace <= lorunningspace)
runningwakeup();
msleep(&bd_request, &bdlock, PVM, "psleep", hz);
} else {
/*
* We couldn't find any flushable dirty buffers but
* still have too many dirty buffers, we
* have to sleep and try again. (rare)
*/
msleep(&bd_request, &bdlock, PVM, "qsleep", hz / 10);
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
}
}
These changes appear to give us benefits with both small (32MB) and large (1G) memory machine configurations. I was able to run 'dbench 32' on a 32MB system without bring the machine to a grinding halt. * buffer cache hash table now dynamically allocated. This will have no effect on memory consumption for smaller systems and will help scale the buffer cache for larger systems. * minor enhancement to pmap_clearbit(). I noticed that all the calls to it used constant arguments. Making it an inline allows the constants to propogate to deeper inlines and should produce better code. * removal of inherent vfs_ioopt support through the emplacement of appropriate #ifdef's, with John's permission. If we do not find a use for it by the end of the year we will remove it entirely. * removal of getnewbufloops* counters & sysctl's - no longer necessary for debugging, getnewbuf() is now optimal. * buffer hash table functions removed from sys/buf.h and localized to vfs_bio.c * VFS_BIO_NEED_DIRTYFLUSH flag and support code added ( bwillwrite() ), allowing processes to block when too many dirty buffers are present in the system. * removal of a softdep test in bdwrite() that is no longer necessary now that bdwrite() no longer attempts to flush dirty buffers. * slight optimization added to bqrelse() - there is no reason to test for available buffer space on B_DELWRI buffers. * addition of reverse-scanning code to vfs_bio_awrite(). vfs_bio_awrite() will attempt to locate clusterable areas in both the forward and reverse direction relative to the offset of the buffer passed to it. This will probably not make much of a difference now, but I believe we will start to rely on it heavily in the future if we decide to shift some of the burden of the clustering closer to the actual I/O initiation. * Removal of the newbufcnt and lastnewbuf counters that Kirk added. They do not fix any race conditions that haven't already been fixed by the gbincore() test done after the only call to getnewbuf(). getnewbuf() is a static, so there is no chance of it being misused by other modules. ( Unless Kirk can think of a specific thing that this code fixes. I went through it very carefully and didn't see anything ). * removal of VOP_ISLOCKED() check in flushbufqueues(). I do not think this check is necessary, the buffer should flush properly whether the vnode is locked or not. ( yes? ). * removal of extra arguments passed to getnewbuf() that are not necessary. * missed cluster_wbuild() that had to be a cluster_wbuild_wb() in vfs_cluster.c * vn_write() now calls bwillwrite() *PRIOR* to locking the vnode, which should greatly aid flushing operations in heavy load situations - both the pageout and update daemons will be able to operate more efficiently. * removal of b_usecount. We may add it back in later but for now it is useless. Prior implementations of the buffer cache never had enough buffers for it to be useful, and current implementations which make more buffers available might not benefit relative to the amount of sophistication required to implement a b_usecount. Straight LRU should work just as well, especially when most things are VMIO backed. I expect that (even though John will not like this assumption) directories will become VMIO backed some point soon. Submitted by: Matthew Dillon <dillon@backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-08 06:06:00 +00:00
/*
* flushbufqueues:
*
* Try to flush a buffer in the dirty queue. We must be careful to
* free up B_INVAL buffers instead of write them, which NFS is
* particularly sensitive to.
*/
static int flushwithdeps = 0;
SYSCTL_INT(_vfs, OID_AUTO, flushwithdeps, CTLFLAG_RW, &flushwithdeps,
0, "Number of buffers flushed with dependecies that require rollbacks");
2004-09-15 20:54:23 +00:00
static int
flushbufqueues(struct vnode *lvp, struct bufdomain *bd, int target,
int flushdeps)
{
struct bufqueue *bq;
struct buf *sentinel;
struct vnode *vp;
struct mount *mp;
struct buf *bp;
int hasdeps;
int flushed;
int error;
bool unlock;
flushed = 0;
bq = &bd->bd_dirtyq;
bp = NULL;
sentinel = malloc(sizeof(struct buf), M_TEMP, M_WAITOK | M_ZERO);
sentinel->b_qindex = QUEUE_SENTINEL;
BQ_LOCK(bq);
TAILQ_INSERT_HEAD(&bq->bq_queue, sentinel, b_freelist);
BQ_UNLOCK(bq);
while (flushed != target) {
maybe_yield();
BQ_LOCK(bq);
bp = TAILQ_NEXT(sentinel, b_freelist);
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
if (bp != NULL) {
TAILQ_REMOVE(&bq->bq_queue, sentinel, b_freelist);
TAILQ_INSERT_AFTER(&bq->bq_queue, bp, sentinel,
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
b_freelist);
} else {
BQ_UNLOCK(bq);
break;
}
/*
* Skip sentinels inserted by other invocations of the
* flushbufqueues(), taking care to not reorder them.
*
* Only flush the buffers that belong to the
* vnode locked by the curthread.
*/
if (bp->b_qindex == QUEUE_SENTINEL || (lvp != NULL &&
bp->b_vp != lvp)) {
BQ_UNLOCK(bq);
continue;
}
error = BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL);
BQ_UNLOCK(bq);
if (error != 0)
continue;
/*
* BKGRDINPROG can only be set with the buf and bufobj
* locks both held. We tolerate a race to clear it here.
*/
if ((bp->b_vflags & BV_BKGRDINPROG) != 0 ||
(bp->b_flags & B_DELWRI) == 0) {
BUF_UNLOCK(bp);
continue;
}
if (bp->b_flags & B_INVAL) {
bremfreef(bp);
brelse(bp);
flushed++;
continue;
}
if (!LIST_EMPTY(&bp->b_dep) && buf_countdeps(bp, 0)) {
if (flushdeps == 0) {
BUF_UNLOCK(bp);
continue;
}
hasdeps = 1;
} else
hasdeps = 0;
/*
* We must hold the lock on a vnode before writing
* one of its buffers. Otherwise we may confuse, or
* in the case of a snapshot vnode, deadlock the
* system.
*
* The lock order here is the reverse of the normal
* of vnode followed by buf lock. This is ok because
* the NOWAIT will prevent deadlock.
*/
vp = bp->b_vp;
if (vn_start_write(vp, &mp, V_NOWAIT) != 0) {
BUF_UNLOCK(bp);
continue;
}
if (lvp == NULL) {
unlock = true;
error = vn_lock(vp, LK_EXCLUSIVE | LK_NOWAIT);
} else {
ASSERT_VOP_LOCKED(vp, "getbuf");
unlock = false;
error = VOP_ISLOCKED(vp) == LK_EXCLUSIVE ? 0 :
vn_lock(vp, LK_TRYUPGRADE);
}
if (error == 0) {
CTR3(KTR_BUF, "flushbufqueue(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
if (curproc == bufdaemonproc) {
vfs_bio_awrite(bp);
} else {
bremfree(bp);
bwrite(bp);
counter_u64_add(notbufdflushes, 1);
}
vn_finished_write(mp);
if (unlock)
VOP_UNLOCK(vp, 0);
flushwithdeps += hasdeps;
flushed++;
/*
* Sleeping on runningbufspace while holding
* vnode lock leads to deadlock.
*/
if (curproc == bufdaemonproc &&
runningbufspace > hirunningspace)
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
waitrunningbufspace();
continue;
}
vn_finished_write(mp);
BUF_UNLOCK(bp);
}
BQ_LOCK(bq);
TAILQ_REMOVE(&bq->bq_queue, sentinel, b_freelist);
BQ_UNLOCK(bq);
free(sentinel, M_TEMP);
return (flushed);
}
/*
* Check to see if a block is currently memory resident.
*/
1994-05-24 10:09:53 +00:00
struct buf *
incore(struct bufobj *bo, daddr_t blkno)
1994-05-24 10:09:53 +00:00
{
struct buf *bp;
BO_RLOCK(bo);
bp = gbincore(bo, blkno);
BO_RUNLOCK(bo);
return (bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
* Returns true if no I/O is needed to access the
* associated VM object. This is like incore except
* it also hunts around in the VM system for the data.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
static int
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
inmem(struct vnode * vp, daddr_t blkno)
{
vm_object_t obj;
vm_offset_t toff, tinc, size;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
vm_page_t m;
vm_ooffset_t off;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
ASSERT_VOP_LOCKED(vp, "inmem");
if (incore(&vp->v_bufobj, blkno))
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 1;
if (vp->v_mount == NULL)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 0;
obj = vp->v_object;
if (obj == NULL)
return (0);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
size = PAGE_SIZE;
if (size > vp->v_mount->mnt_stat.f_iosize)
size = vp->v_mount->mnt_stat.f_iosize;
off = (vm_ooffset_t)blkno * (vm_ooffset_t)vp->v_mount->mnt_stat.f_iosize;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
VM_OBJECT_RLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
for (toff = 0; toff < vp->v_mount->mnt_stat.f_iosize; toff += tinc) {
m = vm_page_lookup(obj, OFF_TO_IDX(off + toff));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (!m)
goto notinmem;
tinc = size;
if (tinc > PAGE_SIZE - ((toff + off) & PAGE_MASK))
tinc = PAGE_SIZE - ((toff + off) & PAGE_MASK);
if (vm_page_is_valid(m,
(vm_offset_t) ((toff + off) & PAGE_MASK), tinc) == 0)
goto notinmem;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
VM_OBJECT_RUNLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return 1;
notinmem:
VM_OBJECT_RUNLOCK(obj);
return (0);
1994-05-24 10:09:53 +00:00
}
/*
* Set the dirty range for a buffer based on the status of the dirty
* bits in the pages comprising the buffer. The range is limited
* to the size of the buffer.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Tell the VM system that the pages associated with this buffer
* are clean. This is used for delayed writes where the data is
* going to go to disk eventually without additional VM intevention.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Note that while we only really need to clean through to b_bcount, we
* just go ahead and clean through to b_bufsize.
*/
static void
vfs_clean_pages_dirty_buf(struct buf *bp)
{
vm_ooffset_t foff, noff, eoff;
vm_page_t m;
int i;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if ((bp->b_flags & B_VMIO) == 0 || bp->b_bufsize == 0)
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
return;
1999-01-12 11:59:34 +00:00
foff = bp->b_offset;
KASSERT(bp->b_offset != NOOFFSET,
("vfs_clean_pages_dirty_buf: no buffer offset"));
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
vfs_drain_busy_pages(bp);
vfs_setdirty_locked_object(bp);
for (i = 0; i < bp->b_npages; i++) {
noff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
eoff = noff;
if (eoff > bp->b_offset + bp->b_bufsize)
eoff = bp->b_offset + bp->b_bufsize;
m = bp->b_pages[i];
vfs_page_set_validclean(bp, foff, m);
/* vm_page_clear_dirty(m, foff & PAGE_MASK, eoff - foff); */
foff = noff;
}
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
}
static void
vfs_setdirty_locked_object(struct buf *bp)
{
vm_object_t object;
int i;
object = bp->b_bufobj->bo_object;
VM_OBJECT_ASSERT_WLOCKED(object);
/*
* We qualify the scan for modified pages on whether the
* object has been flushed yet.
*/
if ((object->flags & OBJ_MIGHTBEDIRTY) != 0) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
vm_offset_t boffset;
vm_offset_t eoffset;
/*
* test the pages to see if they have been modified directly
* by users through the VM system.
*/
for (i = 0; i < bp->b_npages; i++)
vm_page_test_dirty(bp->b_pages[i]);
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Calculate the encompassing dirty range, boffset and eoffset,
* (eoffset - boffset) bytes.
*/
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
for (i = 0; i < bp->b_npages; i++) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if (bp->b_pages[i]->dirty)
break;
}
boffset = (i << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
for (i = bp->b_npages - 1; i >= 0; --i) {
if (bp->b_pages[i]->dirty) {
break;
}
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
eoffset = ((i + 1) << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
/*
* Fit it to the buffer.
*/
if (eoffset > bp->b_bcount)
eoffset = bp->b_bcount;
/*
* If we have a good dirty range, merge with the existing
* dirty range.
*/
if (boffset < eoffset) {
if (bp->b_dirtyoff > boffset)
bp->b_dirtyoff = boffset;
if (bp->b_dirtyend < eoffset)
bp->b_dirtyend = eoffset;
}
}
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Allocate the KVA mapping for an existing buffer.
* If an unmapped buffer is provided but a mapped buffer is requested, take
* also care to properly setup mappings between pages and KVA.
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
*/
static void
bp_unmapped_get_kva(struct buf *bp, daddr_t blkno, int size, int gbflags)
{
int bsize, maxsize, need_mapping, need_kva;
off_t offset;
need_mapping = bp->b_data == unmapped_buf &&
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
(gbflags & GB_UNMAPPED) == 0;
need_kva = bp->b_kvabase == unmapped_buf &&
bp->b_data == unmapped_buf &&
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
(gbflags & GB_KVAALLOC) != 0;
if (!need_mapping && !need_kva)
return;
BUF_CHECK_UNMAPPED(bp);
if (need_mapping && bp->b_kvabase != unmapped_buf) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Buffer is not mapped, but the KVA was already
* reserved at the time of the instantiation. Use the
* allocated space.
*/
goto has_addr;
}
/*
* Calculate the amount of the address space we would reserve
* if the buffer was mapped.
*/
bsize = vn_isdisk(bp->b_vp, NULL) ? DEV_BSIZE : bp->b_bufobj->bo_bsize;
KASSERT(bsize != 0, ("bsize == 0, check bo->bo_bsize"));
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
offset = blkno * bsize;
maxsize = size + (offset & PAGE_MASK);
maxsize = imax(maxsize, bsize);
while (bufkva_alloc(bp, maxsize, gbflags) != 0) {
if ((gbflags & GB_NOWAIT_BD) != 0) {
/*
* XXXKIB: defragmentation cannot
* succeed, not sure what else to do.
*/
panic("GB_NOWAIT_BD and GB_UNMAPPED %p", bp);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
counter_u64_add(mappingrestarts, 1);
bufspace_wait(bufdomain(bp), bp->b_vp, gbflags, 0, 0);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
has_addr:
if (need_mapping) {
/* b_offset is handled by bpmap_qenter. */
bp->b_data = bp->b_kvabase;
BUF_CHECK_MAPPED(bp);
bpmap_qenter(bp);
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
struct buf *
getblk(struct vnode *vp, daddr_t blkno, int size, int slpflag, int slptimeo,
int flags)
{
struct buf *bp;
int error;
error = getblkx(vp, blkno, size, slpflag, slptimeo, flags, &bp);
if (error != 0)
return (NULL);
return (bp);
}
/*
* getblkx:
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Get a block given a specified block and offset into a file/device.
* The buffers B_DONE bit will be cleared on return, making it almost
* ready for an I/O initiation. B_INVAL may or may not be set on
* return. The caller should clear B_INVAL prior to initiating a
* READ.
*
* For a non-VMIO buffer, B_CACHE is set to the opposite of B_INVAL for
* an existing buffer.
*
* For a VMIO buffer, B_CACHE is modified according to the backing VM.
* If getblk()ing a previously 0-sized invalid buffer, B_CACHE is set
* and then cleared based on the backing VM. If the previous buffer is
* non-0-sized but invalid, B_CACHE will be cleared.
*
* If getblk() must create a new buffer, the new buffer is returned with
* both B_INVAL and B_CACHE clear unless it is a VMIO buffer, in which
* case it is returned with B_INVAL clear and B_CACHE set based on the
* backing VM.
*
* getblk() also forces a bwrite() for any B_DELWRI buffer whos
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* B_CACHE bit is clear.
*
* What this means, basically, is that the caller should use B_CACHE to
* determine whether the buffer is fully valid or not and should clear
* B_INVAL prior to issuing a read. If the caller intends to validate
* the buffer by loading its data area with something, the caller needs
* to clear B_INVAL. If the caller does this without issuing an I/O,
* the caller should set B_CACHE ( as an optimization ), else the caller
* should issue the I/O and biodone() will set B_CACHE if the I/O was
* a write attempt or if it was a successful read. If the caller
* intends to issue a READ, the caller must clear B_INVAL and BIO_ERROR
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* prior to issuing the READ. biodone() will *not* clear B_INVAL.
*/
int
getblkx(struct vnode *vp, daddr_t blkno, int size, int slpflag, int slptimeo,
int flags, struct buf **bpp)
1994-05-24 10:09:53 +00:00
{
struct buf *bp;
struct bufobj *bo;
daddr_t d_blkno;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
int bsize, error, maxsize, vmio;
off_t offset;
CTR3(KTR_BUF, "getblk(%p, %ld, %d)", vp, (long)blkno, size);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
KASSERT((flags & (GB_UNMAPPED | GB_KVAALLOC)) != GB_KVAALLOC,
("GB_KVAALLOC only makes sense with GB_UNMAPPED"));
ASSERT_VOP_LOCKED(vp, "getblk");
if (size > maxbcachebuf)
panic("getblk: size(%d) > maxbcachebuf(%d)\n", size,
maxbcachebuf);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (!unmapped_buf_allowed)
flags &= ~(GB_UNMAPPED | GB_KVAALLOC);
bo = &vp->v_bufobj;
d_blkno = blkno;
loop:
BO_RLOCK(bo);
bp = gbincore(bo, blkno);
if (bp != NULL) {
int lockflags;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Buffer is in-core. If the buffer is not busy nor managed,
* it must be on a queue.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
lockflags = LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if ((flags & GB_LOCK_NOWAIT) != 0)
lockflags |= LK_NOWAIT;
error = BUF_TIMELOCK(bp, lockflags,
BO_LOCKPTR(bo), "getblk", slpflag, slptimeo);
/*
* If we slept and got the lock we have to restart in case
* the buffer changed identities.
*/
if (error == ENOLCK)
goto loop;
/* We timed out or were interrupted. */
else if (error != 0)
return (error);
2013-02-27 18:17:34 +00:00
/* If recursed, assume caller knows the rules. */
else if (BUF_LOCKRECURSED(bp))
goto end;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* The buffer is locked. B_CACHE is cleared if the buffer is
* invalid. Otherwise, for a non-VMIO buffer, B_CACHE is set
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* and for a VMIO buffer B_CACHE is adjusted according to the
* backing VM cache.
*/
if (bp->b_flags & B_INVAL)
bp->b_flags &= ~B_CACHE;
else if ((bp->b_flags & (B_VMIO | B_INVAL)) == 0)
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_CACHE;
if (bp->b_flags & B_MANAGED)
MPASS(bp->b_qindex == QUEUE_NONE);
else
bremfree(bp);
/*
* check for size inconsistencies for non-VMIO case.
*/
if (bp->b_bcount != size) {
if ((bp->b_flags & B_VMIO) == 0 ||
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
(size > bp->b_kvasize)) {
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
if (bp->b_flags & B_DELWRI) {
bp->b_flags |= B_NOCACHE;
bwrite(bp);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
} else {
if (LIST_EMPTY(&bp->b_dep)) {
bp->b_flags |= B_RELBUF;
brelse(bp);
} else {
bp->b_flags |= B_NOCACHE;
bwrite(bp);
}
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
}
goto loop;
}
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Handle the case of unmapped buffer which should
* become mapped, or the buffer for which KVA
* reservation is requested.
*/
bp_unmapped_get_kva(bp, blkno, size, flags);
/*
* If the size is inconsistent in the VMIO case, we can resize
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* the buffer. This might lead to B_CACHE getting set or
* cleared. If the size has not changed, B_CACHE remains
* unchanged from its previous state.
*/
allocbuf(bp, size);
KASSERT(bp->b_offset != NOOFFSET,
1999-01-10 01:58:29 +00:00
("getblk: no buffer offset"));
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* A buffer with B_DELWRI set and B_CACHE clear must
* be committed before we can return the buffer in
* order to prevent the caller from issuing a read
* ( due to B_CACHE not being set ) and overwriting
* it.
*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Most callers, including NFS and FFS, need this to
* operate properly either because they assume they
* can issue a read if B_CACHE is not set, or because
* ( for example ) an uncached B_DELWRI might loop due
* to softupdates re-dirtying the buffer. In the latter
* case, B_CACHE is set after the first write completes,
* preventing further loops.
This fixes a large number of bugs in our NFS client side code. A recent commit by Kirk also fixed a softupdates bug that could easily be triggered by server side NFS. * An edge case with shared R+W mmap()'s and truncate whereby the system would inappropriately clear the dirty bits on still-dirty data. (applicable to all filesystems) THIS FIX TEMPORARILY DISABLED PENDING FURTHER TESTING. see vm/vm_page.c line 1641 * The straddle case for VM pages and buffer cache buffers when truncating. (applicable to NFS client side) * Possible SMP database corruption due to vm_pager_unmap_page() not clearing the TLB for the other cpu's. (applicable to NFS client side but could effect all filesystems). Note: not considered serious since the corruption occurs beyond the file EOF. * When flusing a dirty buffer due to B_CACHE getting cleared, we were accidently setting B_CACHE again (that is, bwrite() sets B_CACHE), when we really want it to stay clear after the write is complete. This resulted in a corrupt buffer. (applicable to all filesystems but probably only triggered by NFS) * We have to call vtruncbuf() when ftruncate()ing to remove any buffer cache buffers. This is still tentitive, I may be able to remove it due to the second bug fix. (applicable to NFS client side) * vnode_pager_setsize() race against nfs_vinvalbuf()... we have to set n_size before calling nfs_vinvalbuf or the NFS code may recursively vnode_pager_setsize() to the original value before the truncate. This is what was causing the user mmap bus faults in the nfs tester program. (applicable to NFS client side) * Fix to softupdates (see ufs/ffs/ffs_inode.c 1.73, commit made by Kirk). Testing program written by: Avadis Tevanian, Jr. Testing program supplied by: jkh / Apple (see Dec2001 posting to freebsd-hackers with Subject 'NFS: How to make FreeBS fall on its face in one easy step') MFC after: 1 week
2001-12-14 01:16:57 +00:00
* NOTE! b*write() sets B_CACHE. If we cleared B_CACHE
* above while extending the buffer, we cannot allow the
* buffer to remain with B_CACHE set after the write
* completes or it will represent a corrupt state. To
* deal with this we set B_NOCACHE to scrap the buffer
* after the write.
*
* We might be able to do something fancy, like setting
* B_CACHE in bwrite() except if B_DELWRI is already set,
* so the below call doesn't set B_CACHE, but that gets real
* confusing. This is much easier.
*/
if ((bp->b_flags & (B_CACHE|B_DELWRI)) == B_DELWRI) {
This fixes a large number of bugs in our NFS client side code. A recent commit by Kirk also fixed a softupdates bug that could easily be triggered by server side NFS. * An edge case with shared R+W mmap()'s and truncate whereby the system would inappropriately clear the dirty bits on still-dirty data. (applicable to all filesystems) THIS FIX TEMPORARILY DISABLED PENDING FURTHER TESTING. see vm/vm_page.c line 1641 * The straddle case for VM pages and buffer cache buffers when truncating. (applicable to NFS client side) * Possible SMP database corruption due to vm_pager_unmap_page() not clearing the TLB for the other cpu's. (applicable to NFS client side but could effect all filesystems). Note: not considered serious since the corruption occurs beyond the file EOF. * When flusing a dirty buffer due to B_CACHE getting cleared, we were accidently setting B_CACHE again (that is, bwrite() sets B_CACHE), when we really want it to stay clear after the write is complete. This resulted in a corrupt buffer. (applicable to all filesystems but probably only triggered by NFS) * We have to call vtruncbuf() when ftruncate()ing to remove any buffer cache buffers. This is still tentitive, I may be able to remove it due to the second bug fix. (applicable to NFS client side) * vnode_pager_setsize() race against nfs_vinvalbuf()... we have to set n_size before calling nfs_vinvalbuf or the NFS code may recursively vnode_pager_setsize() to the original value before the truncate. This is what was causing the user mmap bus faults in the nfs tester program. (applicable to NFS client side) * Fix to softupdates (see ufs/ffs/ffs_inode.c 1.73, commit made by Kirk). Testing program written by: Avadis Tevanian, Jr. Testing program supplied by: jkh / Apple (see Dec2001 posting to freebsd-hackers with Subject 'NFS: How to make FreeBS fall on its face in one easy step') MFC after: 1 week
2001-12-14 01:16:57 +00:00
bp->b_flags |= B_NOCACHE;
bwrite(bp);
goto loop;
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags &= ~B_DONE;
} else {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Buffer is not in-core, create new buffer. The buffer
* returned by getnewbuf() is locked. Note that the returned
* buffer is also considered valid (not marked B_INVAL).
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*/
BO_RUNLOCK(bo);
/*
* If the user does not want us to create the buffer, bail out
* here.
*/
if (flags & GB_NOCREAT)
return (EEXIST);
bsize = vn_isdisk(vp, NULL) ? DEV_BSIZE : bo->bo_bsize;
KASSERT(bsize != 0, ("bsize == 0, check bo->bo_bsize"));
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
offset = blkno * bsize;
vmio = vp->v_object != NULL;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if (vmio) {
maxsize = size + (offset & PAGE_MASK);
} else {
maxsize = size;
/* Do not allow non-VMIO notmapped buffers. */
flags &= ~(GB_UNMAPPED | GB_KVAALLOC);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
maxsize = imax(maxsize, bsize);
if ((flags & GB_NOSPARSE) != 0 && vmio &&
!vn_isdisk(vp, NULL)) {
error = VOP_BMAP(vp, blkno, NULL, &d_blkno, 0, 0);
KASSERT(error != EOPNOTSUPP,
("GB_NOSPARSE from fs not supporting bmap, vp %p",
vp));
if (error != 0)
return (error);
if (d_blkno == -1)
return (EJUSTRETURN);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp = getnewbuf(vp, slpflag, slptimeo, maxsize, flags);
if (bp == NULL) {
if (slpflag || slptimeo)
return (ETIMEDOUT);
/*
* XXX This is here until the sleep path is diagnosed
* enough to work under very low memory conditions.
*
* There's an issue on low memory, 4BSD+non-preempt
* systems (eg MIPS routers with 32MB RAM) where buffer
* exhaustion occurs without sleeping for buffer
* reclaimation. This just sticks in a loop and
* constantly attempts to allocate a buffer, which
* hits exhaustion and tries to wakeup bufdaemon.
* This never happens because we never yield.
*
* The real solution is to identify and fix these cases
* so we aren't effectively busy-waiting in a loop
* until the reclaimation path has cycles to run.
*/
kern_yield(PRI_USER);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
goto loop;
}
/*
* This code is used to make sure that a buffer is not
1995-05-30 08:16:23 +00:00
* created while the getnewbuf routine is blocked.
1999-03-02 21:23:38 +00:00
* This can be a problem whether the vnode is locked or not.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* If the buffer is created out from under us, we have to
* throw away the one we just created.
*
* Note: this must occur before we associate the buffer
* with the vp especially considering limitations in
* the splay tree implementation when dealing with duplicate
* lblkno's.
*/
BO_LOCK(bo);
if (gbincore(bo, blkno)) {
BO_UNLOCK(bo);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_flags |= B_INVAL;
bufspace_release(bufdomain(bp), maxsize);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
brelse(bp);
goto loop;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
* Insert the buffer into the hash, so that it can
* be found by incore.
*/
bp->b_lblkno = blkno;
bp->b_blkno = d_blkno;
bp->b_offset = offset;
bgetvp(vp, bp);
BO_UNLOCK(bo);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* set B_VMIO bit. allocbuf() the buffer bigger. Since the
* buffer size starts out as 0, B_CACHE will be set by
* allocbuf() for the VMIO case prior to it testing the
* backing store for validity.
*/
if (vmio) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_VMIO;
KASSERT(vp->v_object == bp->b_bufobj->bo_object,
("ARGH! different b_bufobj->bo_object %p %p %p\n",
bp, vp->v_object, bp->b_bufobj->bo_object));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
} else {
bp->b_flags &= ~B_VMIO;
KASSERT(bp->b_bufobj->bo_object == NULL,
("ARGH! has b_bufobj->bo_object %p %p\n",
bp, bp->b_bufobj->bo_object));
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
allocbuf(bp, size);
bufspace_release(bufdomain(bp), maxsize);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags &= ~B_DONE;
}
CTR4(KTR_BUF, "getblk(%p, %ld, %d) = %p", vp, (long)blkno, size, bp);
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
2013-02-27 18:17:34 +00:00
end:
buf_track(bp, __func__);
KASSERT(bp->b_bufobj == bo,
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
*bpp = bp;
return (0);
1994-05-24 10:09:53 +00:00
}
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Get an empty, disassociated buffer of given size. The buffer is initially
* set to B_INVAL.
*/
struct buf *
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
geteblk(int size, int flags)
1994-05-24 10:09:53 +00:00
{
struct buf *bp;
int maxsize;
maxsize = (size + BKVAMASK) & ~BKVAMASK;
while ((bp = getnewbuf(NULL, 0, 0, maxsize, flags)) == NULL) {
Fix two issues with bufdaemon, often causing the processes to hang in the "nbufkv" sleep. First, ffs background cg group block write requests a new buffer for the shadow copy. When ffs_bufwrite() is called from the bufdaemon due to buffers shortage, requesting the buffer deadlock bufdaemon. Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk to not block while allocating the buffer, and return failure instead. Add a flag argument to the geteblk to allow to pass the flags to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer allocation failed and either GB_NOWAIT_BD is specified, or geteblk() is called from bufdaemon (or its helper, see below). In ffs_bufwrite(), fall back to synchronous cg block write if shadow block allocation failed. Since r107847, buffer write assumes that vnode owning the buffer is locked. The second problem is that buffer cache may accumulate many buffers belonging to limited number of vnodes. With such workload, quite often threads that own the mentioned vnodes locks are trying to read another block from the vnodes, and, due to buffer cache exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make any substantial progress because the vnodes are locked. Allow the threads owning vnode locks to help the bufdaemon by doing the flush pass over the buffer cache before getnewbuf() is going to uninterruptible sleep. Move the flushing code from buf_daemon() to new helper function buf_do_flush(), that is called from getnewbuf(). The number of buffers flushed by single call to buf_do_flush() from getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent recursive calls to buf_do_flush() by marking the bufdaemon and threads that temporarily help bufdaemon by TDP_BUFNEED flag. In collaboration with: pho Reviewed by: tegge (previous version) Tested by: glebius, yandex ... MFC after: 3 weeks
2009-03-16 15:39:46 +00:00
if ((flags & GB_NOWAIT_BD) &&
(curthread->td_pflags & TDP_BUFNEED) != 0)
return (NULL);
}
allocbuf(bp, size);
bufspace_release(bufdomain(bp), maxsize);
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_INVAL; /* b_dep cleared by getnewbuf() */
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
return (bp);
1994-05-24 10:09:53 +00:00
}
/*
* Truncate the backing store for a non-vmio buffer.
*/
static void
vfs_nonvmio_truncate(struct buf *bp, int newbsize)
{
if (bp->b_flags & B_MALLOC) {
/*
* malloced buffers are not shrunk
*/
if (newbsize == 0) {
bufmallocadjust(bp, 0);
free(bp->b_data, M_BIOBUF);
bp->b_data = bp->b_kvabase;
bp->b_flags &= ~B_MALLOC;
}
return;
}
vm_hold_free_pages(bp, newbsize);
bufspace_adjust(bp, newbsize);
}
/*
* Extend the backing for a non-VMIO buffer.
*/
static void
vfs_nonvmio_extend(struct buf *bp, int newbsize)
{
caddr_t origbuf;
int origbufsize;
/*
* We only use malloced memory on the first allocation.
* and revert to page-allocated memory when the buffer
* grows.
*
* There is a potential smp race here that could lead
* to bufmallocspace slightly passing the max. It
* is probably extremely rare and not worth worrying
* over.
*/
if (bp->b_bufsize == 0 && newbsize <= PAGE_SIZE/2 &&
bufmallocspace < maxbufmallocspace) {
bp->b_data = malloc(newbsize, M_BIOBUF, M_WAITOK);
bp->b_flags |= B_MALLOC;
bufmallocadjust(bp, newbsize);
return;
}
/*
* If the buffer is growing on its other-than-first
* allocation then we revert to the page-allocation
* scheme.
*/
origbuf = NULL;
origbufsize = 0;
if (bp->b_flags & B_MALLOC) {
origbuf = bp->b_data;
origbufsize = bp->b_bufsize;
bp->b_data = bp->b_kvabase;
bufmallocadjust(bp, 0);
bp->b_flags &= ~B_MALLOC;
newbsize = round_page(newbsize);
}
vm_hold_load_pages(bp, (vm_offset_t) bp->b_data + bp->b_bufsize,
(vm_offset_t) bp->b_data + newbsize);
if (origbuf != NULL) {
bcopy(origbuf, bp->b_data, origbufsize);
free(origbuf, M_BIOBUF);
}
bufspace_adjust(bp, newbsize);
}
/*
* This code constitutes the buffer memory from either anonymous system
* memory (in the case of non-VMIO operations) or from an associated
* VM object (in the case of VMIO operations). This code is able to
* resize a buffer up or down.
*
* Note that this code is tricky, and has many complications to resolve
* deadlock or inconsistent data situations. Tread lightly!!!
* There are B_CACHE and B_DELWRI interactions that must be dealt with by
* the caller. Calling this code willy nilly can result in the loss of data.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* allocbuf() only adjusts B_CACHE for VMIO buffers. getblk() deals with
* B_CACHE for the non-VMIO case.
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int
allocbuf(struct buf *bp, int size)
1994-05-24 10:09:53 +00:00
{
int newbsize;
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
if (bp->b_bcount == size)
return (1);
if (bp->b_kvasize != 0 && bp->b_kvasize < size)
panic("allocbuf: buffer too small");
newbsize = roundup2(size, DEV_BSIZE);
if ((bp->b_flags & B_VMIO) == 0) {
if ((bp->b_flags & B_MALLOC) == 0)
newbsize = round_page(newbsize);
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Just get anonymous memory from the kernel. Don't
* mess with B_CACHE.
*/
if (newbsize < bp->b_bufsize)
vfs_nonvmio_truncate(bp, newbsize);
else if (newbsize > bp->b_bufsize)
vfs_nonvmio_extend(bp, newbsize);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
} else {
int desiredpages;
desiredpages = (size == 0) ? 0 :
num_pages((bp->b_offset & PAGE_MASK) + newbsize);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_MALLOC)
panic("allocbuf: VMIO buffer can't be malloced");
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set B_CACHE initially if buffer is 0 length or will become
* 0-length.
*/
if (size == 0 || bp->b_bufsize == 0)
bp->b_flags |= B_CACHE;
if (newbsize < bp->b_bufsize)
vfs_vmio_truncate(bp, desiredpages);
/* XXX This looks as if it should be newbsize > b_bufsize */
else if (size > bp->b_bcount)
vfs_vmio_extend(bp, desiredpages, size);
bufspace_adjust(bp, newbsize);
}
bp->b_bcount = size; /* requested buffer size. */
return (1);
1994-05-24 10:09:53 +00:00
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
extern int inflight_transient_maps;
static struct bio_queue nondump_bios;
void
biodone(struct bio *bp)
{
struct mtx *mtxp;
void (*done)(struct bio *);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
vm_offset_t start, end;
2004-09-15 20:54:23 +00:00
biotrack(bp, __func__);
/*
* Avoid completing I/O when dumping after a panic since that may
* result in a deadlock in the filesystem or pager code. Note that
* this doesn't affect dumps that were started manually since we aim
* to keep the system usable after it has been resumed.
*/
if (__predict_false(dumping && SCHEDULER_STOPPED())) {
TAILQ_INSERT_HEAD(&nondump_bios, bp, bio_queue);
return;
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
if ((bp->bio_flags & BIO_TRANSIENT_MAPPING) != 0) {
bp->bio_flags &= ~BIO_TRANSIENT_MAPPING;
bp->bio_flags |= BIO_UNMAPPED;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
start = trunc_page((vm_offset_t)bp->bio_data);
end = round_page((vm_offset_t)bp->bio_data + bp->bio_length);
bp->bio_data = unmapped_buf;
pmap_qremove(start, atop(end - start));
vmem_free(transient_arena, start, end - start);
atomic_add_int(&inflight_transient_maps, -1);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
done = bp->bio_done;
if (done == NULL) {
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
bp->bio_flags |= BIO_DONE;
wakeup(bp);
mtx_unlock(mtxp);
} else
done(bp);
}
/*
* Wait for a BIO to finish.
*/
int
biowait(struct bio *bp, const char *wchan)
{
struct mtx *mtxp;
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
while ((bp->bio_flags & BIO_DONE) == 0)
msleep(bp, mtxp, PRIBIO, wchan, 0);
mtx_unlock(mtxp);
if (bp->bio_error != 0)
return (bp->bio_error);
if (!(bp->bio_flags & BIO_ERROR))
return (0);
return (EIO);
}
void
biofinish(struct bio *bp, struct devstat *stat, int error)
{
if (error) {
bp->bio_error = error;
bp->bio_flags |= BIO_ERROR;
}
if (stat != NULL)
devstat_end_transaction_bio(stat, bp);
biodone(bp);
}
#if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
void
biotrack_buf(struct bio *bp, const char *location)
{
buf_track(bp->bio_track_bp, location);
}
#endif
/*
* bufwait:
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Wait for buffer I/O completion, returning error status. The buffer
* is left locked and B_DONE on return. B_EINTR is converted into an EINTR
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* error and cleared.
*/
int
2004-09-15 20:54:23 +00:00
bufwait(struct buf *bp)
1994-05-24 10:09:53 +00:00
{
if (bp->b_iocmd == BIO_READ)
bwait(bp, PRIBIO, "biord");
else
bwait(bp, PRIBIO, "biowr");
if (bp->b_flags & B_EINTR) {
bp->b_flags &= ~B_EINTR;
return (EINTR);
}
if (bp->b_ioflags & BIO_ERROR) {
return (bp->b_error ? bp->b_error : EIO);
} else {
return (0);
}
1994-05-24 10:09:53 +00:00
}
/*
* bufdone:
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Finish I/O on a buffer, optionally calling a completion function.
* This is usually called from an interrupt so process blocking is
* not allowed.
*
* biodone is also responsible for setting B_CACHE in a B_VMIO bp.
* In a non-VMIO bp, B_CACHE will be set on the next getblk()
* assuming B_INVAL is clear.
*
* For the VMIO case, we set B_CACHE if the op was a read and no
* read error occurred, or if the op was a write. B_CACHE is never
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* set if the buffer is invalid or otherwise uncacheable.
*
* bufdone does not mess with B_INVAL, allowing the I/O routine or the
* initiator to leave B_INVAL set to brelse the buffer out of existence
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* in the biodone routine.
*/
void
bufdone(struct buf *bp)
1994-05-24 10:09:53 +00:00
{
struct bufobj *dropobj;
2002-03-19 21:25:46 +00:00
void (*biodone)(struct buf *);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
buf_track(bp, __func__);
CTR3(KTR_BUF, "bufdone(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
dropobj = NULL;
KASSERT(!(bp->b_flags & B_DONE), ("biodone: bp %p already done", bp));
- Add real assertions to lockmgr locking primitives. A couple of notes for this: * WITNESS support, when enabled, is only used for shared locks in order to avoid problems with the "disowned" locks * KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order to assert for a generic thread (not curthread) owning or not the lock. Really, this kind of check is bogus but it seems very widespread in the consumers code. So, for the moment, we cater this untrusted behaviour, until the consumers are not fixed and the options could be removed (hopefully during 8.0-CURRENT lifecycle) * Implementing KA_HELD and KA_UNHELD (not surported natively by WITNESS) made necessary the introduction of LA_MASKASSERT which specifies the range for default lock assertion flags * About other aspects, lockmgr_assert() follows exactly what other locking primitives offer about this operation. - Build real assertions for buffer cache locks on the top of lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp) paradigm. - Add checks at lock destruction time and use a cookie for verifying lock integrity at any operation. - Redefine BUF_LOCKFREE() in order to not use a direct assert but let it rely on the aforementioned destruction time check. KPI results evidently broken, so __FreeBSD_version bumping and manpage update result necessary and will be committed soon. Side note: lockmgr_assert() will be used soon in order to implement real assertions in the vnode namespace replacing the legacy and still bogus "VOP_ISLOCKED()" way. Tested by: kris (earlier version) Reviewed by: jhb
2008-02-13 20:44:19 +00:00
BUF_ASSERT_HELD(bp);
runningbufwakeup(bp);
if (bp->b_iocmd == BIO_WRITE)
dropobj = bp->b_bufobj;
/* call optional completion function if requested */
if (bp->b_iodone != NULL) {
biodone = bp->b_iodone;
bp->b_iodone = NULL;
(*biodone) (bp);
if (dropobj)
bufobj_wdrop(dropobj);
return;
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_VMIO) {
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set B_CACHE if the op was a normal read and no error
* occurred. B_CACHE is set for writes in the b*write()
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* routines.
*/
if (bp->b_iocmd == BIO_READ &&
!(bp->b_flags & (B_INVAL|B_NOCACHE)) &&
!(bp->b_ioflags & BIO_ERROR))
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
bp->b_flags |= B_CACHE;
vfs_vmio_iodone(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Merge biodone_finish() back into biodone(). The primary purpose is to make the order of operations clearer to avoid the race condition that was fixed in r328914. In particular, this commit corrects a similar race that existed in the soft updates callback. Doing some sleuthing through the SVN repository, it appears that bufdone_finish() was added to support XFS: ------------------------------------------------------------------------ r153192 | rodrigc | 2005-12-06 19:39:08 -0800 (Tue, 06 Dec 2005) | 13 lines Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@ ------------------------------------------------------------------------ It does not appear to ever have been used for anything else. XFS was disconnected in r241607: ------------------------------------------------------------------------ r241607 | attilio | 2012-10-16 03:04:00 -0700 (Tue, 16 Oct 2012) | 5 lines Disconnect non-MPSAFE XFS from the build in preparation for dropping GIANT from VFS. This is not targeted for MFC. ------------------------------------------------------------------------ and removed entirely in r247631: ------------------------------------------------------------------------ r247631 | attilio | 2013-03-02 07:33:54 -0800 (Sat, 02 Mar 2013) | 5 lines Garbage collect XFS bits which are now already completely disconnected from the tree since few months. This is not targeted for MFC. ------------------------------------------------------------------------ Since XFS support is gone, there is no reason to retain biodone_finish(). Suggested by: Warner Losh (imp) Discussed with: cem, kib Tested by: Peter Holm (pho)
2018-02-09 19:50:47 +00:00
if (!LIST_EMPTY(&bp->b_dep))
buf_complete(bp);
Occasional cylinder-group check-hash errors were being reported on systems running with a heavy filesystem load. Tracking down this bug was elusive because there were actually two problems. Sometimes the in-memory check hash was wrong and sometimes the check hash computed when doing the read was wrong. The occurrence of either error caused a check-hash mismatch to be reported. The first error was that the check hash in the in-memory cylinder group was incorrect. This error was caused by the following sequence of events: - We read a cylinder-group buffer and the check hash is valid. - We update its cg_time and cg_old_time which makes the in-memory check-hash value invalid but we do not mark the cylinder group dirty. - We do not make any other changes to the cylinder group, so we never mark it dirty, thus do not write it out, and hence never update the incorrect check hash for the in-memory buffer. - Later, the buffer gets freed, but the page with the old incorrect check hash is still in the VM cache. - Later, we read the cylinder group again, and the first page with the old check hash is still in the VM cache, but some other pages are not, so we have to do a read. - The read does not actually get the first page from disk, but rather from the VM cache, resulting in the old check hash in the buffer. - The value computed after doing the read does not match causing the error to be printed. The fix for this problem is to only set cg_time and cg_old_time as the cylinder group is being written to disk. This keeps the in-memory check-hash valid unless the cylinder group has had other modifications which will require it to be written with a new check hash calculated. It also requires that the check hash be recalculated in the in-memory cylinder group when it is marked clean after doing a background write. The second problem was that the check hash computed at the end of the read was incorrect because the calculation of the check hash on completion of the read was being done too soon. - When a read completes we had the following sequence: - bufdone() -- b_ckhashcalc (calculates check hash) -- bufdone_finish() --- vfs_vmio_iodone() (replaces bogus pages with the cached ones) - When we are reading a buffer where one or more pages are already in memory (but not all pages, or we wouldn't be doing the read), the I/O is done with bogus_page mapped in for the pages that exist in the VM cache. This mapping is done to avoid corrupting the cached pages if there is any I/O overrun. The vfs_vmio_iodone() function is responsible for replacing the bogus_page(s) with the cached ones. But we were calculating the check hash before the bogus_page(s) were replaced. Hence, when we were calculating the check hash, we were partly reading from bogus_page, which means we calculated a bad check hash (e.g., because multiple pages have been mapped to bogus_page, so its contents are indeterminate). The second fix is to move the check-hash calculation from bufdone() to bufdone_finish() after the call to vfs_vmio_iodone() so that it computes the check hash over the correct set of pages. With these two changes, the occasional cylinder-group check-hash errors are gone. Submitted by: David Pfitzner <dpfitzner@netflix.com> Reviewed by: kib Tested by: David Pfitzner
2018-02-06 00:19:46 +00:00
if ((bp->b_flags & B_CKHASH) != 0) {
KASSERT(bp->b_iocmd == BIO_READ,
Merge biodone_finish() back into biodone(). The primary purpose is to make the order of operations clearer to avoid the race condition that was fixed in r328914. In particular, this commit corrects a similar race that existed in the soft updates callback. Doing some sleuthing through the SVN repository, it appears that bufdone_finish() was added to support XFS: ------------------------------------------------------------------------ r153192 | rodrigc | 2005-12-06 19:39:08 -0800 (Tue, 06 Dec 2005) | 13 lines Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@ ------------------------------------------------------------------------ It does not appear to ever have been used for anything else. XFS was disconnected in r241607: ------------------------------------------------------------------------ r241607 | attilio | 2012-10-16 03:04:00 -0700 (Tue, 16 Oct 2012) | 5 lines Disconnect non-MPSAFE XFS from the build in preparation for dropping GIANT from VFS. This is not targeted for MFC. ------------------------------------------------------------------------ and removed entirely in r247631: ------------------------------------------------------------------------ r247631 | attilio | 2013-03-02 07:33:54 -0800 (Sat, 02 Mar 2013) | 5 lines Garbage collect XFS bits which are now already completely disconnected from the tree since few months. This is not targeted for MFC. ------------------------------------------------------------------------ Since XFS support is gone, there is no reason to retain biodone_finish(). Suggested by: Warner Losh (imp) Discussed with: cem, kib Tested by: Peter Holm (pho)
2018-02-09 19:50:47 +00:00
("bufdone: b_iocmd %d not BIO_READ", bp->b_iocmd));
KASSERT(buf_mapped(bp), ("bufdone: bp %p not mapped", bp));
Occasional cylinder-group check-hash errors were being reported on systems running with a heavy filesystem load. Tracking down this bug was elusive because there were actually two problems. Sometimes the in-memory check hash was wrong and sometimes the check hash computed when doing the read was wrong. The occurrence of either error caused a check-hash mismatch to be reported. The first error was that the check hash in the in-memory cylinder group was incorrect. This error was caused by the following sequence of events: - We read a cylinder-group buffer and the check hash is valid. - We update its cg_time and cg_old_time which makes the in-memory check-hash value invalid but we do not mark the cylinder group dirty. - We do not make any other changes to the cylinder group, so we never mark it dirty, thus do not write it out, and hence never update the incorrect check hash for the in-memory buffer. - Later, the buffer gets freed, but the page with the old incorrect check hash is still in the VM cache. - Later, we read the cylinder group again, and the first page with the old check hash is still in the VM cache, but some other pages are not, so we have to do a read. - The read does not actually get the first page from disk, but rather from the VM cache, resulting in the old check hash in the buffer. - The value computed after doing the read does not match causing the error to be printed. The fix for this problem is to only set cg_time and cg_old_time as the cylinder group is being written to disk. This keeps the in-memory check-hash valid unless the cylinder group has had other modifications which will require it to be written with a new check hash calculated. It also requires that the check hash be recalculated in the in-memory cylinder group when it is marked clean after doing a background write. The second problem was that the check hash computed at the end of the read was incorrect because the calculation of the check hash on completion of the read was being done too soon. - When a read completes we had the following sequence: - bufdone() -- b_ckhashcalc (calculates check hash) -- bufdone_finish() --- vfs_vmio_iodone() (replaces bogus pages with the cached ones) - When we are reading a buffer where one or more pages are already in memory (but not all pages, or we wouldn't be doing the read), the I/O is done with bogus_page mapped in for the pages that exist in the VM cache. This mapping is done to avoid corrupting the cached pages if there is any I/O overrun. The vfs_vmio_iodone() function is responsible for replacing the bogus_page(s) with the cached ones. But we were calculating the check hash before the bogus_page(s) were replaced. Hence, when we were calculating the check hash, we were partly reading from bogus_page, which means we calculated a bad check hash (e.g., because multiple pages have been mapped to bogus_page, so its contents are indeterminate). The second fix is to move the check-hash calculation from bufdone() to bufdone_finish() after the call to vfs_vmio_iodone() so that it computes the check hash over the correct set of pages. With these two changes, the occasional cylinder-group check-hash errors are gone. Submitted by: David Pfitzner <dpfitzner@netflix.com> Reviewed by: kib Tested by: David Pfitzner
2018-02-06 00:19:46 +00:00
(*bp->b_ckhashcalc)(bp);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* For asynchronous completions, release the buffer now. The brelse
* will do a wakeup there if necessary - so no need to do a wakeup
* here in the async case. The sync case always needs to do a wakeup.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
if (bp->b_flags & B_ASYNC) {
if ((bp->b_flags & (B_NOCACHE | B_INVAL | B_RELBUF)) ||
(bp->b_ioflags & BIO_ERROR))
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
brelse(bp);
else
bqrelse(bp);
} else
bdone(bp);
Merge biodone_finish() back into biodone(). The primary purpose is to make the order of operations clearer to avoid the race condition that was fixed in r328914. In particular, this commit corrects a similar race that existed in the soft updates callback. Doing some sleuthing through the SVN repository, it appears that bufdone_finish() was added to support XFS: ------------------------------------------------------------------------ r153192 | rodrigc | 2005-12-06 19:39:08 -0800 (Tue, 06 Dec 2005) | 13 lines Changes imported from XFS for FreeBSD project: - add fields to struct buf (needed by XFS) - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3 - b_pin_count, count of pinned buffer - add new B_MANAGED flag - add breada() function to initiate asynchronous I/O on read-ahead blocks. - add bufdone_finish(), bpin(), bunpin_wait() functions Patches provided by: kan Reviewed by: phk Silence on: arch@ ------------------------------------------------------------------------ It does not appear to ever have been used for anything else. XFS was disconnected in r241607: ------------------------------------------------------------------------ r241607 | attilio | 2012-10-16 03:04:00 -0700 (Tue, 16 Oct 2012) | 5 lines Disconnect non-MPSAFE XFS from the build in preparation for dropping GIANT from VFS. This is not targeted for MFC. ------------------------------------------------------------------------ and removed entirely in r247631: ------------------------------------------------------------------------ r247631 | attilio | 2013-03-02 07:33:54 -0800 (Sat, 02 Mar 2013) | 5 lines Garbage collect XFS bits which are now already completely disconnected from the tree since few months. This is not targeted for MFC. ------------------------------------------------------------------------ Since XFS support is gone, there is no reason to retain biodone_finish(). Suggested by: Warner Losh (imp) Discussed with: cem, kib Tested by: Peter Holm (pho)
2018-02-09 19:50:47 +00:00
if (dropobj)
bufobj_wdrop(dropobj);
1994-05-24 10:09:53 +00:00
}
/*
* This routine is called in lieu of iodone in the case of
* incomplete I/O. This keeps the busy status for pages
* consistent.
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
void
2004-09-15 20:54:23 +00:00
vfs_unbusy_pages(struct buf *bp)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
int i;
2004-09-15 21:08:58 +00:00
vm_object_t obj;
vm_page_t m;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
runningbufwakeup(bp);
2004-09-15 21:08:58 +00:00
if (!(bp->b_flags & B_VMIO))
return;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
obj = bp->b_bufobj->bo_object;
VM_OBJECT_WLOCK(obj);
2004-09-15 21:08:58 +00:00
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
if (m == bogus_page) {
m = vm_page_lookup(obj, OFF_TO_IDX(bp->b_offset) + i);
if (!m)
2004-09-15 21:08:58 +00:00
panic("vfs_unbusy_pages: page missing\n");
bp->b_pages[i] = m;
if (buf_mapped(bp)) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
} else
BUF_CHECK_UNMAPPED(bp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
vm_page_sunbusy(m);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
vm_object_pip_wakeupn(obj, bp->b_npages);
VM_OBJECT_WUNLOCK(obj);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* vfs_page_set_valid:
*
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* Set the valid bits in a page based on the supplied offset. The
* range is restricted to the buffer's size.
*
* This routine is typically called after a read completes.
*/
static void
vfs_page_set_valid(struct buf *bp, vm_ooffset_t off, vm_page_t m)
{
vm_ooffset_t eoff;
/*
* Compute the end offset, eoff, such that [off, eoff) does not span a
* page boundary and eoff is not greater than the end of the buffer.
* The end of the buffer, in this case, is our file EOF, not the
* allocation size of the buffer.
*/
eoff = (off + PAGE_SIZE) & ~(vm_ooffset_t)PAGE_MASK;
if (eoff > bp->b_offset + bp->b_bcount)
eoff = bp->b_offset + bp->b_bcount;
/*
* Set valid range. This is typically the entire buffer and thus the
* entire page.
*/
if (eoff > off)
vm_page_set_valid_range(m, off & PAGE_MASK, eoff - off);
}
/*
* vfs_page_set_validclean:
*
* Set the valid bits and clear the dirty bits in a page based on the
* supplied offset. The range is restricted to the buffer's size.
*/
static void
vfs_page_set_validclean(struct buf *bp, vm_ooffset_t off, vm_page_t m)
{
vm_ooffset_t soff, eoff;
/*
* Start and end offsets in buffer. eoff - soff may not cross a
* page boundary or cross the end of the buffer. The end of the
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* buffer, in this case, is our file EOF, not the allocation size
* of the buffer.
*/
soff = off;
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
eoff = (off + PAGE_SIZE) & ~(off_t)PAGE_MASK;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
if (eoff > bp->b_offset + bp->b_bcount)
eoff = bp->b_offset + bp->b_bcount;
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* Set valid range. This is typically the entire buffer and thus the
* entire page.
*/
if (eoff > soff) {
vm_page_set_validclean(
m,
(vm_offset_t) (soff & PAGE_MASK),
(vm_offset_t) (eoff - soff)
);
}
}
/*
* Ensure that all buffer pages are not exclusive busied. If any page is
* exclusive busy, drain it.
*/
void
vfs_drain_busy_pages(struct buf *bp)
{
vm_page_t m;
int i, last_busied;
VM_OBJECT_ASSERT_WLOCKED(bp->b_bufobj->bo_object);
last_busied = 0;
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
if (vm_page_xbusied(m)) {
for (; last_busied < i; last_busied++)
vm_page_sbusy(bp->b_pages[last_busied]);
while (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
Fix a race in vm_page_busy_sleep(9). Suppose that we have an exclusively busy page, and a thread which can accept shared-busy page. In this case, typical code waiting for the page xbusy state to pass is again: VM_OBJECT_WLOCK(object); ... if (vm_page_xbusied(m)) { vm_page_lock(m); VM_OBJECT_WUNLOCK(object); <---1 vm_page_busy_sleep(p, "vmopax"); goto again; } Suppose that the xbusy state owner locked the object, unbusied the page and unlocked the object after we are at the line [1], but before we executed the load of the busy_lock word in vm_page_busy_sleep(). If it happens that there is still no waiters recorded for the busy state, the xbusy owner did not acquired the page lock, so it proceeded. More, suppose that some other thread happen to share-busy the page after xbusy state was relinquished but before the m->busy_lock is read in vm_page_busy_sleep(). Again, that thread only needs vm_object lock to proceed. Then, vm_page_busy_sleep() reads busy_lock value equal to the VPB_SHARERS_WORD(1). In this case, all tests in vm_page_busy_sleep(9) pass and we are going to sleep, despite the page being share-busied. Update check for m->busy_lock == VPB_UNBUSIED in vm_page_busy_sleep(9) to also accept shared-busy state if we only wait for the xbusy state to pass. Merge sequential if()s with the same 'then' clause in vm_page_busy_sleep(). Note that the current code does not share-busy pages from parallel threads, the only way to have more that one sbusy owner is right now is to recurse. Reported and tested by: pho (previous version) Reviewed by: alc, markj Sponsored by: The FreeBSD Foundation MFC after: 1 week Differential revision: https://reviews.freebsd.org/D8196
2016-10-13 14:41:05 +00:00
vm_page_busy_sleep(m, "vbpage", true);
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
}
}
}
for (i = 0; i < last_busied; i++)
vm_page_sunbusy(bp->b_pages[i]);
}
/*
* This routine is called before a device strategy routine.
* It is used to tell the VM system that paging I/O is in
* progress, and treat the pages associated with the buffer
* almost as being exclusive busy. Also the object paging_in_progress
* flag is handled to make sure that the object doesn't become
* inconsistent.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Since I/O has not been initiated yet, certain buffer flags
* such as BIO_ERROR or B_INVAL may be in an inconsistent state
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
* and should be ignored.
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
void
2004-09-15 20:54:23 +00:00
vfs_busy_pages(struct buf *bp, int clear_modify)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
2004-09-15 21:08:58 +00:00
vm_object_t obj;
vm_ooffset_t foff;
vm_page_t m;
int i;
bool bogus;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
2004-09-15 21:08:58 +00:00
if (!(bp->b_flags & B_VMIO))
return;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
obj = bp->b_bufobj->bo_object;
2004-09-15 21:08:58 +00:00
foff = bp->b_offset;
KASSERT(bp->b_offset != NOOFFSET,
("vfs_busy_pages: no buffer offset"));
VM_OBJECT_WLOCK(obj);
vfs_drain_busy_pages(bp);
if (bp->b_bufsize != 0)
vfs_setdirty_locked_object(bp);
bogus = false;
2004-09-15 21:08:58 +00:00
for (i = 0; i < bp->b_npages; i++) {
m = bp->b_pages[i];
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
2004-09-15 21:08:58 +00:00
if ((bp->b_flags & B_CLUSTER) == 0) {
vm_object_pip_add(obj, 1);
vm_page_sbusy(m);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
2004-09-15 21:08:58 +00:00
/*
* When readying a buffer for a read ( i.e
* clear_modify == 0 ), it is important to do
* bogus_page replacement for valid pages in
* partially instantiated buffers. Partially
* instantiated buffers can, in turn, occur when
* reconstituting a buffer from its VM backing store
* base. We only have to do this if B_CACHE is
* clear ( which causes the I/O to occur in the
* first place ). The replacement prevents the read
* I/O from overwriting potentially dirty VM-backed
* pages. XXX bogus page replacement is, uh, bogus.
* It may not work properly with small-block devices.
* We need to find a better way.
*/
if (clear_modify) {
pmap_remove_write(m);
vfs_page_set_validclean(bp, foff, m);
} else if (m->valid == VM_PAGE_BITS_ALL &&
(bp->b_flags & B_CACHE) == 0) {
2004-09-15 21:08:58 +00:00
bp->b_pages[i] = bogus_page;
bogus = true;
2004-09-15 21:08:58 +00:00
}
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
VM_OBJECT_WUNLOCK(obj);
if (bogus && buf_mapped(bp)) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
2004-09-15 21:08:58 +00:00
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
bp->b_pages, bp->b_npages);
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
* vfs_bio_set_valid:
*
* Set the range within the buffer to valid. The range is
* relative to the beginning of the buffer, b_offset. Note that
* b_offset itself may be offset from the beginning of the first
* page.
*/
void
vfs_bio_set_valid(struct buf *bp, int base, int size)
{
int i, n;
vm_page_t m;
if (!(bp->b_flags & B_VMIO))
return;
/*
* Fixup base to be relative to beginning of first page.
* Set initial n to be the maximum number of bytes in the
* first page that can be validated.
*/
base += (bp->b_offset & PAGE_MASK);
n = PAGE_SIZE - (base & PAGE_MASK);
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
for (i = base / PAGE_SIZE; size > 0 && i < bp->b_npages; ++i) {
m = bp->b_pages[i];
if (n > size)
n = size;
vm_page_set_valid_range(m, base & PAGE_MASK, n);
base += n;
size -= n;
n = PAGE_SIZE;
}
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
}
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
/*
* vfs_bio_clrbuf:
*
* If the specified buffer is a non-VMIO buffer, clear the entire
* buffer. If the specified buffer is a VMIO buffer, clear and
* validate only the previously invalid portions of the buffer.
* This routine essentially fakes an I/O, so we need to clear
* BIO_ERROR and B_INVAL.
The VFS/BIO subsystem contained a number of hacks in order to optimize piecemeal, middle-of-file writes for NFS. These hacks have caused no end of trouble, especially when combined with mmap(). I've removed them. Instead, NFS will issue a read-before-write to fully instantiate the struct buf containing the write. NFS does, however, optimize piecemeal appends to files. For most common file operations, you will not notice the difference. The sole remaining fragment in the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache coherency issues with read-merge-write style operations. NFS also optimizes the write-covers-entire-buffer case by avoiding the read-before-write. There is quite a bit of room for further optimization in these areas. The VM system marks pages fully-valid (AKA vm_page_t->valid = VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This is not correct operation. The vm_pager_get_pages() code is now responsible for marking VM pages all-valid. A number of VM helper routines have been added to aid in zeroing-out the invalid portions of a VM page prior to the page being marked all-valid. This operation is necessary to properly support mmap(). The zeroing occurs most often when dealing with file-EOF situations. Several bugs have been fixed in the NFS subsystem, including bits handling file and directory EOF situations and buf->b_flags consistancy issues relating to clearing B_ERROR & B_INVAL, and handling B_DONE. getblk() and allocbuf() have been rewritten. B_CACHE operation is now formally defined in comments and more straightforward in implementation. B_CACHE for VMIO buffers is based on the validity of the backing store. B_CACHE for non-VMIO buffers is based simply on whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear, and vise-versa). biodone() is now responsible for setting B_CACHE when a successful read completes. B_CACHE is also set when a bdwrite() is initiated and when a bwrite() is initiated. VFS VOP_BWRITE routines (there are only two - nfs_bwrite() and bwrite()) are now expected to set B_CACHE. This means that bowrite() and bawrite() also set B_CACHE indirectly. There are a number of places in the code which were previously using buf->b_bufsize (which is DEV_BSIZE aligned) when they should have been using buf->b_bcount. These have been fixed. getblk() now clears B_DONE on return because the rest of the system is so bad about dealing with B_DONE. Major fixes to NFS/TCP have been made. A server-side bug could cause requests to be lost by the server due to nfs_realign() overwriting other rpc's in the same TCP mbuf chain. The server's kernel must be recompiled to get the benefit of the fixes. Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
1999-05-02 23:57:16 +00:00
*
* Note that while we only theoretically need to clear through b_bcount,
* we go ahead and clear through b_bufsize.
*/
void
vfs_bio_clrbuf(struct buf *bp)
{
int i, j, mask, sa, ea, slide;
2004-09-15 21:08:58 +00:00
if ((bp->b_flags & (B_VMIO | B_MALLOC)) != B_VMIO) {
clrbuf(bp);
return;
}
bp->b_flags &= ~B_INVAL;
bp->b_ioflags &= ~BIO_ERROR;
VM_OBJECT_WLOCK(bp->b_bufobj->bo_object);
if ((bp->b_npages == 1) && (bp->b_bufsize < PAGE_SIZE) &&
2004-09-15 21:08:58 +00:00
(bp->b_offset & PAGE_MASK) == 0) {
if (bp->b_pages[0] == bogus_page)
goto unlock;
mask = (1 << (bp->b_bufsize / DEV_BSIZE)) - 1;
VM_OBJECT_ASSERT_WLOCKED(bp->b_pages[0]->object);
2004-09-15 21:08:58 +00:00
if ((bp->b_pages[0]->valid & mask) == mask)
goto unlock;
if ((bp->b_pages[0]->valid & mask) == 0) {
pmap_zero_page_area(bp->b_pages[0], 0, bp->b_bufsize);
2004-09-15 21:08:58 +00:00
bp->b_pages[0]->valid |= mask;
goto unlock;
1995-05-30 08:16:23 +00:00
}
2004-09-15 21:08:58 +00:00
}
sa = bp->b_offset & PAGE_MASK;
slide = 0;
for (i = 0; i < bp->b_npages; i++, sa = 0) {
slide = imin(slide + PAGE_SIZE, bp->b_offset + bp->b_bufsize);
ea = slide & PAGE_MASK;
if (ea == 0)
ea = PAGE_SIZE;
2004-09-15 21:08:58 +00:00
if (bp->b_pages[i] == bogus_page)
continue;
j = sa / DEV_BSIZE;
2004-09-15 21:08:58 +00:00
mask = ((1 << ((ea - sa) / DEV_BSIZE)) - 1) << j;
VM_OBJECT_ASSERT_WLOCKED(bp->b_pages[i]->object);
2004-09-15 21:08:58 +00:00
if ((bp->b_pages[i]->valid & mask) == mask)
continue;
if ((bp->b_pages[i]->valid & mask) == 0)
pmap_zero_page_area(bp->b_pages[i], sa, ea - sa);
else {
2004-09-15 21:08:58 +00:00
for (; sa < ea; sa += DEV_BSIZE, j++) {
if ((bp->b_pages[i]->valid & (1 << j)) == 0) {
pmap_zero_page_area(bp->b_pages[i],
sa, DEV_BSIZE);
}
}
}
2004-09-15 21:08:58 +00:00
bp->b_pages[i]->valid |= mask;
}
2004-09-15 21:08:58 +00:00
unlock:
VM_OBJECT_WUNLOCK(bp->b_bufobj->bo_object);
2004-09-15 21:08:58 +00:00
bp->b_resid = 0;
}
void
vfs_bio_bzero_buf(struct buf *bp, int base, int size)
{
vm_page_t m;
int i, n;
if (buf_mapped(bp)) {
BUF_CHECK_MAPPED(bp);
bzero(bp->b_data + base, size);
} else {
BUF_CHECK_UNMAPPED(bp);
n = PAGE_SIZE - (base & PAGE_MASK);
for (i = base / PAGE_SIZE; size > 0 && i < bp->b_npages; ++i) {
m = bp->b_pages[i];
if (n > size)
n = size;
pmap_zero_page_area(m, base & PAGE_MASK, n);
base += n;
size -= n;
n = PAGE_SIZE;
}
}
}
/*
* Update buffer flags based on I/O request parameters, optionally releasing the
* buffer. If it's VMIO or direct I/O, the buffer pages are released to the VM,
* where they may be placed on a page queue (VMIO) or freed immediately (direct
* I/O). Otherwise the buffer is released to the cache.
*/
static void
b_io_dismiss(struct buf *bp, int ioflag, bool release)
{
KASSERT((ioflag & IO_NOREUSE) == 0 || (ioflag & IO_VMIO) != 0,
("buf %p non-VMIO noreuse", bp));
if ((ioflag & IO_DIRECT) != 0)
bp->b_flags |= B_DIRECT;
This is an additional fix for bug report 230962. When using extended attributes, the kernel can panic with either "ffs_truncate3" or with "softdep_deallocate_dependencies: dangling deps". The problem arises because the flushbuflist() function which is called to clear out buffers is passed either the V_NORMAL flag to indicate that it should flush buffer associated with the contents of the file or the V_ALT flag to indicate that it should flush the buffers associated with the extended attribute data. The buffers containing the extended attribute data are identified by having their BX_ALTDATA flag set in the buffer's b_xflags field. The BX_ALTDATA flag is set on the buffer when the extended attribute block is first allocated or when its contents are read in from the disk. On a busy system, a buffer may be reused for another purpose, but the contents of the block that it contained continues to be held in the main page cache. Each physical page is identified as holding the contents of a logical block within a specified file (identified by a vnode). When a request is made to read a file, the kernel first looks for the block in the existing buffers. If it is not found there, it checks the page cache to see if it is still there. If it is found in the page cache, then it is remapped into a new buffer thus avoiding the need to read it in from the disk. The bug is that when a buffer request made for an extended attribute is fulfilled by reconstituting a buffer from the page cache rather than reading it in from disk, the BX_ALTDATA flag was not being set. Thus the flushbuflist() function would never clear it out and the "ffs_truncate3" panic would occur because the vnode being cleared still had buffers on its clean-buffer list. If the extended attribute was being updated, it is first read, then updated, and finally written. If the read is fulfilled by reconstituting the buffer from the page cache the BX_ALTDATA flag was not set and thus the dirty buffer would never be flushed by flushbuflist(). Eventually the buffer would be recycled. Since it was never written it would have an unfinished dependency which would trigger the "softdep_deallocate_dependencies: dangling deps" panic. The fix is to ensure that the BX_ALTDATA flag is set when a buffer has been reconstituted from the page cache. PR: 230962 Reported by: 2t8mr7kx9f@protonmail.com Reviewed by: kib Tested by: Peter Holm MFC after: 1 week Sponsored by: Netflix
2019-03-12 19:08:41 +00:00
if ((ioflag & IO_EXT) != 0)
bp->b_xflags |= BX_ALTDATA;
if ((ioflag & (IO_VMIO | IO_DIRECT)) != 0 && LIST_EMPTY(&bp->b_dep)) {
bp->b_flags |= B_RELBUF;
if ((ioflag & IO_NOREUSE) != 0)
bp->b_flags |= B_NOREUSE;
if (release)
brelse(bp);
} else if (release)
bqrelse(bp);
}
void
vfs_bio_brelse(struct buf *bp, int ioflag)
{
b_io_dismiss(bp, ioflag, true);
}
void
vfs_bio_set_flags(struct buf *bp, int ioflag)
{
b_io_dismiss(bp, ioflag, false);
}
1994-05-24 10:09:53 +00:00
/*
* vm_hold_load_pages and vm_hold_free_pages get pages into
* a buffers address space. The pages are anonymous and are
* not associated with a file object.
1994-05-24 10:09:53 +00:00
*/
static void
2004-09-15 20:54:23 +00:00
vm_hold_load_pages(struct buf *bp, vm_offset_t from, vm_offset_t to)
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{
vm_offset_t pg;
vm_page_t p;
int index;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
to = round_page(to);
from = round_page(from);
index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
for (pg = from; pg < to; pg += PAGE_SIZE, index++) {
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
/*
* note: must allocate system pages since blocking here
* could interfere with paging I/O, no matter which
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
* process we are.
*/
p = vm_page_alloc(NULL, 0, VM_ALLOC_SYSTEM | VM_ALLOC_NOOBJ |
VM_ALLOC_WIRED | VM_ALLOC_COUNT((to - pg) >> PAGE_SHIFT) |
VM_ALLOC_WAITOK);
pmap_qenter(pg, &p, 1);
bp->b_pages[index] = p;
1994-05-24 10:09:53 +00:00
}
bp->b_npages = index;
1994-05-24 10:09:53 +00:00
}
/* Return pages associated with this buf to the vm system */
static void
vm_hold_free_pages(struct buf *bp, int newbsize)
{
vm_offset_t from;
vm_page_t p;
int index, newnpages;
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
BUF_CHECK_MAPPED(bp);
from = round_page((vm_offset_t)bp->b_data + newbsize);
newnpages = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
if (bp->b_npages > newnpages)
pmap_qremove(from, bp->b_npages - newnpages);
for (index = newnpages; index < bp->b_npages; index++) {
p = bp->b_pages[index];
bp->b_pages[index] = NULL;
p->wire_count--;
vm_page_free(p);
}
vm_wire_sub(bp->b_npages - newnpages);
bp->b_npages = newnpages;
}
/*
* Map an IO request into kernel virtual address space.
*
* All requests are (re)mapped into kernel VA space.
* Notice that we use b_bufsize for the size of the buffer
* to be mapped. b_bcount might be modified by the driver.
*
* Note that even if the caller determines that the address space should
* be valid, a race or a smaller-file mapped into a larger space may
* actually cause vmapbuf() to fail, so all callers of vmapbuf() MUST
* check the return value.
*
* This function only works with pager buffers.
*/
int
vmapbuf(struct buf *bp, int mapbuf)
{
vm_prot_t prot;
int pidx;
if (bp->b_bufsize < 0)
return (-1);
2004-09-15 20:54:23 +00:00
prot = VM_PROT_READ;
if (bp->b_iocmd == BIO_READ)
prot |= VM_PROT_WRITE; /* Less backwards than it looks */
if ((pidx = vm_fault_quick_hold_pages(&curproc->p_vmspace->vm_map,
(vm_offset_t)bp->b_data, bp->b_bufsize, prot, bp->b_pages,
btoc(MAXPHYS))) < 0)
return (-1);
bp->b_npages = pidx;
bp->b_offset = ((vm_offset_t)bp->b_data) & PAGE_MASK;
if (mapbuf || !unmapped_buf_allowed) {
pmap_qenter((vm_offset_t)bp->b_kvabase, bp->b_pages, pidx);
bp->b_data = bp->b_kvabase + bp->b_offset;
} else
bp->b_data = unmapped_buf;
return(0);
}
/*
* Free the io map PTEs associated with this IO operation.
* We also invalidate the TLB entries and restore the original b_addr.
*
* This function only works with pager buffers.
*/
void
vunmapbuf(struct buf *bp)
{
int npages;
npages = bp->b_npages;
if (buf_mapped(bp))
pmap_qremove(trunc_page((vm_offset_t)bp->b_data), npages);
vm_page_unhold_pages(bp->b_pages, npages);
bp->b_data = unmapped_buf;
}
void
bdone(struct buf *bp)
{
struct mtx *mtxp;
2004-09-15 20:54:23 +00:00
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
bp->b_flags |= B_DONE;
wakeup(bp);
mtx_unlock(mtxp);
}
void
bwait(struct buf *bp, u_char pri, const char *wchan)
{
struct mtx *mtxp;
2004-09-15 20:54:23 +00:00
mtxp = mtx_pool_find(mtxpool_sleep, bp);
mtx_lock(mtxp);
while ((bp->b_flags & B_DONE) == 0)
msleep(bp, mtxp, pri, wchan, 0);
mtx_unlock(mtxp);
}
int
bufsync(struct bufobj *bo, int waitfor)
{
return (VOP_FSYNC(bo2vnode(bo), waitfor, curthread));
}
void
bufstrategy(struct bufobj *bo, struct buf *bp)
{
int i __unused;
struct vnode *vp;
vp = bp->b_vp;
KASSERT(vp == bo->bo_private, ("Inconsistent vnode bufstrategy"));
KASSERT(vp->v_type != VCHR && vp->v_type != VBLK,
("Wrong vnode in bufstrategy(bp=%p, vp=%p)", bp, vp));
i = VOP_STRATEGY(vp, bp);
KASSERT(i == 0, ("VOP_STRATEGY failed bp=%p vp=%p", bp, bp->b_vp));
}
/*
* Initialize a struct bufobj before use. Memory is assumed zero filled.
*/
void
bufobj_init(struct bufobj *bo, void *private)
{
static volatile int bufobj_cleanq;
bo->bo_domain =
atomic_fetchadd_int(&bufobj_cleanq, 1) % buf_domains;
rw_init(BO_LOCKPTR(bo), "bufobj interlock");
bo->bo_private = private;
TAILQ_INIT(&bo->bo_clean.bv_hd);
TAILQ_INIT(&bo->bo_dirty.bv_hd);
}
void
bufobj_wrefl(struct bufobj *bo)
{
KASSERT(bo != NULL, ("NULL bo in bufobj_wref"));
ASSERT_BO_WLOCKED(bo);
bo->bo_numoutput++;
}
void
bufobj_wref(struct bufobj *bo)
{
KASSERT(bo != NULL, ("NULL bo in bufobj_wref"));
BO_LOCK(bo);
bo->bo_numoutput++;
BO_UNLOCK(bo);
}
void
bufobj_wdrop(struct bufobj *bo)
{
KASSERT(bo != NULL, ("NULL bo in bufobj_wdrop"));
BO_LOCK(bo);
KASSERT(bo->bo_numoutput > 0, ("bufobj_wdrop non-positive count"));
if ((--bo->bo_numoutput == 0) && (bo->bo_flag & BO_WWAIT)) {
bo->bo_flag &= ~BO_WWAIT;
wakeup(&bo->bo_numoutput);
}
BO_UNLOCK(bo);
}
int
bufobj_wwait(struct bufobj *bo, int slpflag, int timeo)
{
int error;
KASSERT(bo != NULL, ("NULL bo in bufobj_wwait"));
ASSERT_BO_WLOCKED(bo);
error = 0;
while (bo->bo_numoutput) {
bo->bo_flag |= BO_WWAIT;
error = msleep(&bo->bo_numoutput, BO_LOCKPTR(bo),
slpflag | (PRIBIO + 1), "bo_wwait", timeo);
if (error)
break;
}
return (error);
}
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
/*
* Set bio_data or bio_ma for struct bio from the struct buf.
*/
void
bdata2bio(struct buf *bp, struct bio *bip)
{
if (!buf_mapped(bp)) {
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
KASSERT(unmapped_buf_allowed, ("unmapped"));
bip->bio_ma = bp->b_pages;
bip->bio_ma_n = bp->b_npages;
bip->bio_data = unmapped_buf;
bip->bio_ma_offset = (vm_offset_t)bp->b_offset & PAGE_MASK;
bip->bio_flags |= BIO_UNMAPPED;
KASSERT(round_page(bip->bio_ma_offset + bip->bio_length) /
PAGE_SIZE == bp->b_npages,
("Buffer %p too short: %d %lld %d", bp, bip->bio_ma_offset,
(long long)bip->bio_length, bip->bio_ma_n));
Implement the concept of the unmapped VMIO buffers, i.e. buffers which do not map the b_pages pages into buffer_map KVA. The use of the unmapped buffers eliminate the need to perform TLB shootdown for mapping on the buffer creation and reuse, greatly reducing the amount of IPIs for shootdown on big-SMP machines and eliminating up to 25-30% of the system time on i/o intensive workloads. The unmapped buffer should be explicitely requested by the GB_UNMAPPED flag by the consumer. For unmapped buffer, no KVA reservation is performed at all. The consumer might request unmapped buffer which does have a KVA reserve, to manually map it without recursing into buffer cache and blocking, with the GB_KVAALLOC flag. When the mapped buffer is requested and unmapped buffer already exists, the cache performs an upgrade, possibly reusing the KVA reservation. Unmapped buffer is translated into unmapped bio in g_vfs_strategy(). Unmapped bio carry a pointer to the vm_page_t array, offset and length instead of the data pointer. The provider which processes the bio should explicitely specify a readiness to accept unmapped bio, otherwise g_down geom thread performs the transient upgrade of the bio request by mapping the pages into the new bio_transient_map KVA submap. The bio_transient_map submap claims up to 10% of the buffer map, and the total buffer_map + bio_transient_map KVA usage stays the same. Still, it could be manually tuned by kern.bio_transient_maxcnt tunable, in the units of the transient mappings. Eventually, the bio_transient_map could be removed after all geom classes and drivers can accept unmapped i/o requests. Unmapped support can be turned off by the vfs.unmapped_buf_allowed tunable, disabling which makes the buffer (or cluster) creation requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped buffers are only enabled by default on the architectures where pmap_copy_page() was implemented and tested. In the rework, filesystem metadata is not the subject to maxbufspace limit anymore. Since the metadata buffers are always mapped, the buffers still have to fit into the buffer map, which provides a reasonable (but practically unreachable) upper bound on it. The non-metadata buffer allocations, both mapped and unmapped, is accounted against maxbufspace, as before. Effectively, this means that the maxbufspace is forced on mapped and unmapped buffers separately. The pre-patch bufspace limiting code did not worked, because buffer_map fragmentation does not allow the limit to be reached. By Jeff Roberson request, the getnewbuf() function was split into smaller single-purpose functions. Sponsored by: The FreeBSD Foundation Discussed with: jeff (previous version) Tested by: pho, scottl (previous version), jhb, bf MFC after: 2 weeks
2013-03-19 14:13:12 +00:00
} else {
bip->bio_data = bp->b_data;
bip->bio_ma = NULL;
}
}
/*
* The MIPS pmap code currently doesn't handle aliased pages.
* The VIPT caches may not handle page aliasing themselves, leading
* to data corruption.
*
* As such, this code makes a system extremely unhappy if said
* system doesn't support unaliasing the above situation in hardware.
* Some "recent" systems (eg some mips24k/mips74k cores) don't enable
* this feature at build time, so it has to be handled in software.
*
* Once the MIPS pmap/cache code grows to support this function on
* earlier chips, it should be flipped back off.
*/
#ifdef __mips__
static int buf_pager_relbuf = 1;
#else
static int buf_pager_relbuf = 0;
#endif
SYSCTL_INT(_vfs, OID_AUTO, buf_pager_relbuf, CTLFLAG_RWTUN,
&buf_pager_relbuf, 0,
"Make buffer pager release buffers after reading");
/*
* The buffer pager. It uses buffer reads to validate pages.
*
* In contrast to the generic local pager from vm/vnode_pager.c, this
* pager correctly and easily handles volumes where the underlying
* device block size is greater than the machine page size. The
* buffer cache transparently extends the requested page run to be
* aligned at the block boundary, and does the necessary bogus page
* replacements in the addends to avoid obliterating already valid
* pages.
*
* The only non-trivial issue is that the exclusive busy state for
* pages, which is assumed by the vm_pager_getpages() interface, is
* incompatible with the VMIO buffer cache's desire to share-busy the
* pages. This function performs a trivial downgrade of the pages'
* state before reading buffers, and a less trivial upgrade from the
* shared-busy to excl-busy state after the read.
*/
int
vfs_bio_getpages(struct vnode *vp, vm_page_t *ma, int count,
int *rbehind, int *rahead, vbg_get_lblkno_t get_lblkno,
vbg_get_blksize_t get_blksize)
{
vm_page_t m;
vm_object_t object;
struct buf *bp;
struct mount *mp;
daddr_t lbn, lbnp;
vm_ooffset_t la, lb, poff, poffe;
long bsize;
int bo_bs, br_flags, error, i, pgsin, pgsin_a, pgsin_b;
bool redo, lpart;
object = vp->v_object;
mp = vp->v_mount;
error = 0;
la = IDX_TO_OFF(ma[count - 1]->pindex);
if (la >= object->un_pager.vnp.vnp_size)
return (VM_PAGER_BAD);
/*
* Change the meaning of la from where the last requested page starts
* to where it ends, because that's the end of the requested region
* and the start of the potential read-ahead region.
*/
la += PAGE_SIZE;
lpart = la > object->un_pager.vnp.vnp_size;
bo_bs = get_blksize(vp, get_lblkno(vp, IDX_TO_OFF(ma[0]->pindex)));
/*
* Calculate read-ahead, behind and total pages.
*/
pgsin = count;
lb = IDX_TO_OFF(ma[0]->pindex);
pgsin_b = OFF_TO_IDX(lb - rounddown2(lb, bo_bs));
pgsin += pgsin_b;
if (rbehind != NULL)
*rbehind = pgsin_b;
pgsin_a = OFF_TO_IDX(roundup2(la, bo_bs) - la);
if (la + IDX_TO_OFF(pgsin_a) >= object->un_pager.vnp.vnp_size)
pgsin_a = OFF_TO_IDX(roundup2(object->un_pager.vnp.vnp_size,
PAGE_SIZE) - la);
pgsin += pgsin_a;
if (rahead != NULL)
*rahead = pgsin_a;
VM_CNT_INC(v_vnodein);
VM_CNT_ADD(v_vnodepgsin, pgsin);
br_flags = (mp != NULL && (mp->mnt_kern_flag & MNTK_UNMAPPED_BUFS)
!= 0) ? GB_UNMAPPED : 0;
VM_OBJECT_WLOCK(object);
again:
for (i = 0; i < count; i++)
vm_page_busy_downgrade(ma[i]);
VM_OBJECT_WUNLOCK(object);
lbnp = -1;
for (i = 0; i < count; i++) {
m = ma[i];
/*
* Pages are shared busy and the object lock is not
* owned, which together allow for the pages'
* invalidation. The racy test for validity avoids
* useless creation of the buffer for the most typical
* case when invalidation is not used in redo or for
* parallel read. The shared->excl upgrade loop at
* the end of the function catches the race in a
* reliable way (protected by the object lock).
*/
if (m->valid == VM_PAGE_BITS_ALL)
continue;
poff = IDX_TO_OFF(m->pindex);
poffe = MIN(poff + PAGE_SIZE, object->un_pager.vnp.vnp_size);
for (; poff < poffe; poff += bsize) {
lbn = get_lblkno(vp, poff);
if (lbn == lbnp)
goto next_page;
lbnp = lbn;
bsize = get_blksize(vp, lbn);
error = bread_gb(vp, lbn, bsize, curthread->td_ucred,
br_flags, &bp);
if (error != 0)
goto end_pages;
if (LIST_EMPTY(&bp->b_dep)) {
/*
* Invalidation clears m->valid, but
* may leave B_CACHE flag if the
* buffer existed at the invalidation
* time. In this case, recycle the
* buffer to do real read on next
* bread() after redo.
*
* Otherwise B_RELBUF is not strictly
* necessary, enable to reduce buf
* cache pressure.
*/
if (buf_pager_relbuf ||
m->valid != VM_PAGE_BITS_ALL)
bp->b_flags |= B_RELBUF;
bp->b_flags &= ~B_NOCACHE;
brelse(bp);
} else {
bqrelse(bp);
}
}
KASSERT(1 /* racy, enable for debugging */ ||
m->valid == VM_PAGE_BITS_ALL || i == count - 1,
("buf %d %p invalid", i, m));
if (i == count - 1 && lpart) {
VM_OBJECT_WLOCK(object);
if (m->valid != 0 &&
m->valid != VM_PAGE_BITS_ALL)
vm_page_zero_invalid(m, TRUE);
VM_OBJECT_WUNLOCK(object);
}
next_page:;
}
end_pages:
VM_OBJECT_WLOCK(object);
redo = false;
for (i = 0; i < count; i++) {
vm_page_sunbusy(ma[i]);
ma[i] = vm_page_grab(object, ma[i]->pindex, VM_ALLOC_NORMAL);
/*
* Since the pages were only sbusy while neither the
* buffer nor the object lock was held by us, or
* reallocated while vm_page_grab() slept for busy
* relinguish, they could have been invalidated.
* Recheck the valid bits and re-read as needed.
*
* Note that the last page is made fully valid in the
* read loop, and partial validity for the page at
* index count - 1 could mean that the page was
* invalidated or removed, so we must restart for
* safety as well.
*/
if (ma[i]->valid != VM_PAGE_BITS_ALL)
redo = true;
}
if (redo && error == 0)
goto again;
VM_OBJECT_WUNLOCK(object);
return (error != 0 ? VM_PAGER_ERROR : VM_PAGER_OK);
}
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
/* DDB command to show buffer data */
DB_SHOW_COMMAND(buffer, db_show_buffer)
{
/* get args */
struct buf *bp = (struct buf *)addr;
#ifdef FULL_BUF_TRACKING
uint32_t i, j;
#endif
if (!have_addr) {
db_printf("usage: show buffer <addr>\n");
return;
}
db_printf("buf at %p\n", bp);
db_printf("b_flags = 0x%b, b_xflags=0x%b\n",
(u_int)bp->b_flags, PRINT_BUF_FLAGS,
(u_int)bp->b_xflags, PRINT_BUF_XFLAGS);
db_printf("b_vflags=0x%b b_ioflags0x%b\n",
(u_int)bp->b_vflags, PRINT_BUF_VFLAGS,
(u_int)bp->b_ioflags, PRINT_BIO_FLAGS);
db_printf(
"b_error = %d, b_bufsize = %ld, b_bcount = %ld, b_resid = %ld\n"
"b_bufobj = (%p), b_data = %p\n, b_blkno = %jd, b_lblkno = %jd, "
"b_vp = %p, b_dep = %p\n",
bp->b_error, bp->b_bufsize, bp->b_bcount, bp->b_resid,
bp->b_bufobj, bp->b_data, (intmax_t)bp->b_blkno,
(intmax_t)bp->b_lblkno, bp->b_vp, bp->b_dep.lh_first);
db_printf("b_kvabase = %p, b_kvasize = %d\n",
bp->b_kvabase, bp->b_kvasize);
if (bp->b_npages) {
int i;
db_printf("b_npages = %d, pages(OBJ, IDX, PA): ", bp->b_npages);
for (i = 0; i < bp->b_npages; i++) {
vm_page_t m;
m = bp->b_pages[i];
if (m != NULL)
db_printf("(%p, 0x%lx, 0x%lx)", m->object,
(u_long)m->pindex,
(u_long)VM_PAGE_TO_PHYS(m));
else
db_printf("( ??? )");
if ((i + 1) < bp->b_npages)
db_printf(",");
}
db_printf("\n");
}
BUF_LOCKPRINTINFO(bp);
#if defined(FULL_BUF_TRACKING)
db_printf("b_io_tracking: b_io_tcnt = %u\n", bp->b_io_tcnt);
i = bp->b_io_tcnt % BUF_TRACKING_SIZE;
for (j = 1; j <= BUF_TRACKING_SIZE; j++) {
if (bp->b_io_tracking[BUF_TRACKING_ENTRY(i - j)] == NULL)
continue;
db_printf(" %2u: %s\n", j,
bp->b_io_tracking[BUF_TRACKING_ENTRY(i - j)]);
}
#elif defined(BUF_TRACKING)
db_printf("b_io_tracking: %s\n", bp->b_io_tracking);
#endif
db_printf(" ");
}
DB_SHOW_COMMAND(bufqueues, bufqueues)
{
struct bufdomain *bd;
struct buf *bp;
long total;
int i, j, cnt;
db_printf("bqempty: %d\n", bqempty.bq_len);
for (i = 0; i < buf_domains; i++) {
bd = &bdomain[i];
db_printf("Buf domain %d\n", i);
db_printf("\tfreebufs\t%d\n", bd->bd_freebuffers);
db_printf("\tlofreebufs\t%d\n", bd->bd_lofreebuffers);
db_printf("\thifreebufs\t%d\n", bd->bd_hifreebuffers);
db_printf("\n");
db_printf("\tbufspace\t%ld\n", bd->bd_bufspace);
db_printf("\tmaxbufspace\t%ld\n", bd->bd_maxbufspace);
db_printf("\thibufspace\t%ld\n", bd->bd_hibufspace);
db_printf("\tlobufspace\t%ld\n", bd->bd_lobufspace);
db_printf("\tbufspacethresh\t%ld\n", bd->bd_bufspacethresh);
db_printf("\n");
db_printf("\tnumdirtybuffers\t%d\n", bd->bd_numdirtybuffers);
db_printf("\tlodirtybuffers\t%d\n", bd->bd_lodirtybuffers);
db_printf("\thidirtybuffers\t%d\n", bd->bd_hidirtybuffers);
db_printf("\tdirtybufthresh\t%d\n", bd->bd_dirtybufthresh);
db_printf("\n");
total = 0;
TAILQ_FOREACH(bp, &bd->bd_cleanq->bq_queue, b_freelist)
total += bp->b_bufsize;
db_printf("\tcleanq count\t%d (%ld)\n",
bd->bd_cleanq->bq_len, total);
total = 0;
TAILQ_FOREACH(bp, &bd->bd_dirtyq.bq_queue, b_freelist)
total += bp->b_bufsize;
db_printf("\tdirtyq count\t%d (%ld)\n",
bd->bd_dirtyq.bq_len, total);
db_printf("\twakeup\t\t%d\n", bd->bd_wanted);
db_printf("\tlim\t\t%d\n", bd->bd_lim);
db_printf("\tCPU ");
for (j = 0; j <= mp_maxid; j++)
db_printf("%d, ", bd->bd_subq[j].bq_len);
db_printf("\n");
cnt = 0;
total = 0;
for (j = 0; j < nbuf; j++)
if (buf[j].b_domain == i && BUF_ISLOCKED(&buf[j])) {
cnt++;
total += buf[j].b_bufsize;
}
db_printf("\tLocked buffers: %d space %ld\n", cnt, total);
cnt = 0;
total = 0;
for (j = 0; j < nbuf; j++)
if (buf[j].b_domain == i) {
cnt++;
total += buf[j].b_bufsize;
}
db_printf("\tTotal buffers: %d space %ld\n", cnt, total);
}
}
DB_SHOW_COMMAND(lockedbufs, lockedbufs)
{
struct buf *bp;
int i;
for (i = 0; i < nbuf; i++) {
bp = &buf[i];
if (BUF_ISLOCKED(bp)) {
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
db_printf("\n");
if (db_pager_quit)
break;
}
}
}
DB_SHOW_COMMAND(vnodebufs, db_show_vnodebufs)
{
struct vnode *vp;
struct buf *bp;
if (!have_addr) {
db_printf("usage: show vnodebufs <addr>\n");
return;
}
vp = (struct vnode *)addr;
db_printf("Clean buffers:\n");
TAILQ_FOREACH(bp, &vp->v_bufobj.bo_clean.bv_hd, b_bobufs) {
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
db_printf("\n");
}
db_printf("Dirty buffers:\n");
TAILQ_FOREACH(bp, &vp->v_bufobj.bo_dirty.bv_hd, b_bobufs) {
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
db_printf("\n");
}
}
DB_COMMAND(countfreebufs, db_coundfreebufs)
{
struct buf *bp;
int i, used = 0, nfree = 0;
if (have_addr) {
db_printf("usage: countfreebufs\n");
return;
}
for (i = 0; i < nbuf; i++) {
bp = &buf[i];
if (bp->b_qindex == QUEUE_EMPTY)
nfree++;
else
used++;
}
db_printf("Counted %d free, %d used (%d tot)\n", nfree, used,
nfree + used);
db_printf("numfreebuffers is %d\n", numfreebuffers);
}
#endif /* DDB */