freebsd-skq/sys/dev/aic/aic6360reg.h

332 lines
9.4 KiB
C
Raw Normal View History

1999-10-21 08:56:53 +00:00
/*
* Copyright (c) 1994 Charles Hannum.
* Copyright (c) 1994 Jarle Greipsland.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Jarle Greipsland
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#define SCSISEQ 0x00 /* SCSI sequence control */
#define SXFRCTL0 0x01 /* SCSI transfer control 0 */
#define SXFRCTL1 0x02 /* SCSI transfer control 1 */
#define SCSISIGI 0x03 /* SCSI signal in */
#define SCSISIGO 0x03 /* SCSI signal out */
#define SCSIRATE 0x04 /* SCSI rate control */
#define SCSIID 0x05 /* SCSI ID */
#define SELID 0x05 /* Selection/Reselection ID */
#define SCSIDAT 0x06 /* SCSI Latched Data */
#define SCSIBUS 0x07 /* SCSI Data Bus*/
#define STCNT0 0x08 /* SCSI transfer count */
#define STCNT1 0x09
#define STCNT2 0x0a
#define CLRSINT0 0x0b /* Clear SCSI interrupts 0 */
#define SSTAT0 0x0b /* SCSI interrupt status 0 */
#define CLRSINT1 0x0c /* Clear SCSI interrupts 1 */
#define SSTAT1 0x0c /* SCSI status 1 */
#define SSTAT2 0x0d /* SCSI status 2 */
#define SCSITEST 0x0e /* SCSI test control */
#define SSTAT3 0x0e /* SCSI status 3 */
#define CLRSERR 0x0f /* Clear SCSI errors */
#define SSTAT4 0x0f /* SCSI status 4 */
#define SIMODE0 0x10 /* SCSI interrupt mode 0 */
#define SIMODE1 0x11 /* SCSI interrupt mode 1 */
#define DMACNTRL0 0x12 /* DMA control 0 */
#define DMACNTRL1 0x13 /* DMA control 1 */
#define DMASTAT 0x14 /* DMA status */
#define FIFOSTAT 0x15 /* FIFO status */
#define DMADATA 0x16 /* DMA data */
#define DMADATAL 0x16 /* DMA data low byte */
#define DMADATAH 0x17 /* DMA data high byte */
#define BRSTCNTRL 0x18 /* Burst Control */
#define DMADATALONG 0x18
#define PORTA 0x1a /* Port A */
#define PORTB 0x1b /* Port B */
#define REV 0x1c /* Revision (001 for 6360) */
#define STACK 0x1d /* Stack */
#define TEST 0x1e /* Test register */
#define ID 0x1f /* ID register */
#define IDSTRING "(C)1991ADAPTECAIC6360 "
/* What all the bits do */
/* SCSISEQ */
#define TEMODEO 0x80
#define ENSELO 0x40
#define ENSELI 0x20
#define ENRESELI 0x10
#define ENAUTOATNO 0x08
#define ENAUTOATNI 0x04
#define ENAUTOATNP 0x02
#define SCSIRSTO 0x01
/* SXFRCTL0 */
#define SCSIEN 0x80
#define DMAEN 0x40
#define CHEN 0x20
#define CLRSTCNT 0x10
#define SPIOEN 0x08
#define CLRCH 0x02
/* SXFRCTL1 */
#define BITBUCKET 0x80
#define SWRAPEN 0x40
#define ENSPCHK 0x20
#define STIMESEL1 0x10
#define STIMESEL0 0x08
#define STIMO_256ms 0x00
#define STIMO_128ms 0x08
#define STIMO_64ms 0x10
#define STIMO_32ms 0x18
#define ENSTIMER 0x04
#define BYTEALIGN 0x02
/* SCSISIGI */
#define CDI 0x80
#define IOI 0x40
#define MSGI 0x20
#define ATNI 0x10
#define SELI 0x08
#define BSYI 0x04
#define REQI 0x02
#define ACKI 0x01
/* Important! The 3 most significant bits of this register, in initiator mode,
* represents the "expected" SCSI bus phase and can be used to trigger phase
* mismatch and phase change interrupts. But more important: If there is a
* phase mismatch the chip will not transfer any data! This is actually a nice
* feature as it gives us a bit more control over what is happening when we are
* bursting data (in) through the FIFOs and the phase suddenly changes from
* DATA IN to STATUS or MESSAGE IN. The transfer will stop and wait for the
* proper phase to be set in this register instead of dumping the bits into the
* FIFOs.
*/
/* SCSISIGO */
#define CDO 0x80
#define IOO 0x40
#define MSGO 0x20
#define ATNO 0x10
#define SELO 0x08
#define BSYO 0x04
#define REQO 0x02
#define ACKO 0x01
/* Information transfer phases */
#define PH_DATAOUT (0)
#define PH_DATAIN (IOI)
#define PH_CMD (CDI)
#define PH_STAT (CDI|IOI)
#define PH_MSGOUT (MSGI|CDI)
#define PH_MSGIN (MSGI|CDI|IOI)
#define PH_MASK (MSGI|CDI|IOI)
/* SCSIRATE */
#define SXFR2 0x40
#define SXFR1 0x20
#define SXFR0 0x10
#define SOFS3 0x08
#define SOFS2 0x04
#define SOFS1 0x02
#define SOFS0 0x01
/* SCSI ID */
#define OID2 0x40
#define OID1 0x20
#define OID0 0x10
#define OID_S 4 /* shift value */
#define TID2 0x04
#define TID1 0x02
#define TID0 0x01
#define SCSI_ID_MASK 0x7
/* SCSI selection/reselection ID (both target *and* initiator) */
#define SELID7 0x80
#define SELID6 0x40
#define SELID5 0x20
#define SELID4 0x10
#define SELID3 0x08
#define SELID2 0x04
#define SELID1 0x02
#define SELID0 0x01
/* CLRSINT0 Clears what? (interrupt and/or status bit) */
#define SETSDONE 0x80
#define CLRSELDO 0x40 /* I */
#define CLRSELDI 0x20 /* I+ */
#define CLRSELINGO 0x10 /* I */
#define CLRSWRAP 0x08 /* I+S */
#define CLRSDONE 0x04 /* I+S */
#define CLRSPIORDY 0x02 /* I */
#define CLRDMADONE 0x01 /* I */
/* SSTAT0 Howto clear */
#define TARGET 0x80
#define SELDO 0x40 /* Selfclearing */
#define SELDI 0x20 /* Selfclearing when CLRSELDI is set */
#define SELINGO 0x10 /* Selfclearing */
#define SWRAP 0x08 /* CLRSWAP */
#define SDONE 0x04 /* Not used in initiator mode */
#define SPIORDY 0x02 /* Selfclearing (op on SCSIDAT) */
#define DMADONE 0x01 /* Selfclearing (all FIFOs empty & T/C */
/* CLRSINT1 Clears what? */
#define CLRSELTIMO 0x80 /* I+S */
#define CLRATNO 0x40
#define CLRSCSIRSTI 0x20 /* I+S */
#define CLRBUSFREE 0x08 /* I+S */
#define CLRSCSIPERR 0x04 /* I+S */
#define CLRPHASECHG 0x02 /* I+S */
#define CLRREQINIT 0x01 /* I+S */
/* SSTAT1 How to clear? When set?*/
#define SELTO 0x80 /* C select out timeout */
#define ATNTARG 0x40 /* Not used in initiator mode */
#define SCSIRSTI 0x20 /* C RST asserted */
#define PHASEMIS 0x10 /* Selfclearing */
#define BUSFREE 0x08 /* C bus free condition */
#define SCSIPERR 0x04 /* C parity error on inbound data */
#define PHASECHG 0x02 /* C phase in SCSISIGI doesn't match */
#define REQINIT 0x01 /* C or ACK asserting edge of REQ */
/* SSTAT2 */
#define SOFFSET 0x20
#define SEMPTY 0x10
#define SFULL 0x08
#define SFCNT2 0x04
#define SFCNT1 0x02
#define SFCNT0 0x01
/* SCSITEST */
#define SCTESTU 0x08
#define SCTESTD 0x04
#define STCTEST 0x01
/* SSTAT3 */
#define SCSICNT3 0x80
#define SCSICNT2 0x40
#define SCSICNT1 0x20
#define SCSICNT0 0x10
#define OFFCNT3 0x08
#define OFFCNT2 0x04
#define OFFCNT1 0x02
#define OFFCNT0 0x01
/* CLRSERR */
#define CLRSYNCERR 0x04
#define CLRFWERR 0x02
#define CLRFRERR 0x01
/* SSTAT4 */
#define SYNCERR 0x04
#define FWERR 0x02
#define FRERR 0x01
/* SIMODE0 */
#define ENSELDO 0x40
#define ENSELDI 0x20
#define ENSELINGO 0x10
#define ENSWRAP 0x08
#define ENSDONE 0x04
#define ENSPIORDY 0x02
#define ENDMADONE 0x01
/* SIMODE1 */
#define ENSELTIMO 0x80
#define ENATNTARG 0x40
#define ENSCSIRST 0x20
#define ENPHASEMIS 0x10
#define ENBUSFREE 0x08
#define ENSCSIPERR 0x04
#define ENPHASECHG 0x02
#define ENREQINIT 0x01
/* DMACNTRL0 */
#define ENDMA 0x80
#define B8MODE 0x40
#define DMA 0x20
#define DWORDPIO 0x10
#define WRITE 0x08
#define INTEN 0x04
#define RSTFIFO 0x02
#define SWINT 0x01
/* DMACNTRL1 */
#define PWRDWN 0x80
#define ENSTK32 0x40
#define STK4 0x10
#define STK3 0x08
#define STK2 0x04
#define STK1 0x02
#define STK0 0x01
/* DMASTAT */
#define ATDONE 0x80
#define WORDRDY 0x40
#define INTSTAT 0x20
#define DFIFOFULL 0x10
#define DFIFOEMP 0x08
#define DFIFOHF 0x04
#define DWORDRDY 0x02
/* BRSTCNTRL */
#define BON3 0x80
#define BON2 0x40
#define BON1 0x20
#define BON0 0x10
#define BOFF3 0x08
#define BOFF2 0x04
#define BOFF1 0x02
#define BOFF0 0x01
/* TEST */
#define BOFFTMR 0x40
#define BONTMR 0x20
#define STCNTH 0x10
#define STCNTM 0x08
#define STCNTL 0x04
#define SCSIBLK 0x02
#define DMABLK 0x01
/* PORTA */
#define PORTA_ID(a) ((a) & 7)
#define PORTA_IRQ(a) ((((a) >> 3) & 3) + 9)
#define PORTA_DRQ(a) ((((a) >> 5) & 3) ? (((a) >> 5) & 3) + 4 : 0)
#define PORTA_PARITY(a) ((a) & 0x80)
/* PORTB */
#define PORTB_DISC(b) ((b) & 4)
#define PORTB_SYNC(b) ((b) & 8)
#define PORTB_BOOT(b) ((b) & 0x40)
#define PORTB_DMA(b) ((b) & 0x80)
/* How to behave on the (E)ISA bus when/if DMAing (on<<4) + off in us */
#define EISA_BRST_TIM ((15<<4) + 1) /* 15us on, 1us off */
#define FIFOSIZE 128