freebsd-skq/sys/kern/kern_mib.c

378 lines
13 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Mike Karels at Berkeley Software Design, Inc.
*
* Quite extensively rewritten by Poul-Henning Kamp of the FreeBSD
* project, to make these variables more userfriendly.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_sysctl.c 8.4 (Berkeley) 4/14/94
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_posix.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/proc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
#include <sys/jail.h>
Overhaul of the SMP code. Several portions of the SMP kernel support have been made machine independent and various other adjustments have been made to support Alpha SMP. - It splits the per-process portions of hardclock() and statclock() off into hardclock_process() and statclock_process() respectively. hardclock() and statclock() call the *_process() functions for the current process so that UP systems will run as before. For SMP systems, it is simply necessary to ensure that all other processors execute the *_process() functions when the main clock functions are triggered on one CPU by an interrupt. For the alpha 4100, clock interrupts are delievered in a staggered broadcast fashion, so we simply call hardclock/statclock on the boot CPU and call the *_process() functions on the secondaries. For x86, we call statclock and hardclock as usual and then call forward_hardclock/statclock in the MD code to send an IPI to cause the AP's to execute forwared_hardclock/statclock which then call the *_process() functions. - forward_signal() and forward_roundrobin() have been reworked to be MI and to involve less hackery. Now the cpu doing the forward sets any flags, etc. and sends a very simple IPI_AST to the other cpu(s). AST IPIs now just basically return so that they can execute ast() and don't bother with setting the astpending or needresched flags themselves. This also removes the loop in forward_signal() as sched_lock closes the race condition that the loop worked around. - need_resched(), resched_wanted() and clear_resched() have been changed to take a process to act on rather than assuming curproc so that they can be used to implement forward_roundrobin() as described above. - Various other SMP variables have been moved to a MI subr_smp.c and a new header sys/smp.h declares MI SMP variables and API's. The IPI API's from machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h. - The globaldata_register() and globaldata_find() functions as well as the SLIST of globaldata structures has become MI and moved into subr_smp.c. Also, the globaldata list is only available if SMP support is compiled in. Reviewed by: jake, peter Looked over by: eivind
2001-04-27 19:28:25 +00:00
#include <sys/smp.h>
#include <sys/unistd.h>
SYSCTL_NODE(, 0, sysctl, CTLFLAG_RW, 0,
"Sysctl internal magic");
SYSCTL_NODE(, CTL_KERN, kern, CTLFLAG_RW, 0,
"High kernel, proc, limits &c");
SYSCTL_NODE(, CTL_VM, vm, CTLFLAG_RW, 0,
"Virtual memory");
SYSCTL_NODE(, CTL_VFS, vfs, CTLFLAG_RW, 0,
"File system");
SYSCTL_NODE(, CTL_NET, net, CTLFLAG_RW, 0,
"Network, (see socket.h)");
SYSCTL_NODE(, CTL_DEBUG, debug, CTLFLAG_RW, 0,
"Debugging");
SYSCTL_NODE(_debug, OID_AUTO, sizeof, CTLFLAG_RW, 0,
"Sizeof various things");
SYSCTL_NODE(, CTL_HW, hw, CTLFLAG_RW, 0,
"hardware");
SYSCTL_NODE(, CTL_MACHDEP, machdep, CTLFLAG_RW, 0,
"machine dependent");
SYSCTL_NODE(, CTL_USER, user, CTLFLAG_RW, 0,
"user-level");
SYSCTL_NODE(, CTL_P1003_1B, p1003_1b, CTLFLAG_RW, 0,
"p1003_1b, (see p1003_1b.h)");
1999-08-27 19:47:41 +00:00
SYSCTL_NODE(, OID_AUTO, compat, CTLFLAG_RW, 0,
"Compatibility code");
SYSCTL_NODE(, OID_AUTO, security, CTLFLAG_RW, 0,
"Security");
#ifdef REGRESSION
SYSCTL_NODE(, OID_AUTO, regression, CTLFLAG_RW, 0,
"Regression test MIB");
#endif
1999-08-27 19:47:41 +00:00
SYSCTL_STRING(_kern, OID_AUTO, ident, CTLFLAG_RD,
kern_ident, 0, "Kernel identifier");
SYSCTL_STRING(_kern, KERN_OSRELEASE, osrelease, CTLFLAG_RD,
osrelease, 0, "Operating system release");
SYSCTL_INT(_kern, KERN_OSREV, osrevision, CTLFLAG_RD,
0, BSD, "Operating system revision");
SYSCTL_STRING(_kern, KERN_VERSION, version, CTLFLAG_RD,
version, 0, "Kernel version");
SYSCTL_STRING(_kern, KERN_OSTYPE, ostype, CTLFLAG_RD,
ostype, 0, "Operating system type");
/*
* NOTICE: The *userland* release date is available in
* /usr/include/osreldate.h
*/
extern int osreldate;
SYSCTL_INT(_kern, KERN_OSRELDATE, osreldate, CTLFLAG_RD,
&osreldate, 0, "Kernel release date");
SYSCTL_INT(_kern, KERN_MAXPROC, maxproc, CTLFLAG_RDTUN,
&maxproc, 0, "Maximum number of processes");
SYSCTL_INT(_kern, KERN_MAXPROCPERUID, maxprocperuid, CTLFLAG_RW,
&maxprocperuid, 0, "Maximum processes allowed per userid");
SYSCTL_INT(_kern, OID_AUTO, maxusers, CTLFLAG_RDTUN,
&maxusers, 0, "Hint for kernel tuning");
SYSCTL_INT(_kern, KERN_ARGMAX, argmax, CTLFLAG_RD,
0, ARG_MAX, "Maximum bytes of argument to execve(2)");
SYSCTL_INT(_kern, KERN_POSIX1, posix1version, CTLFLAG_RD,
0, _POSIX_VERSION, "Version of POSIX attempting to comply to");
SYSCTL_INT(_kern, KERN_NGROUPS, ngroups, CTLFLAG_RD,
0, NGROUPS_MAX, "Maximum number of groups a user can belong to");
SYSCTL_INT(_kern, KERN_JOB_CONTROL, job_control, CTLFLAG_RD,
0, 1, "Whether job control is available");
#ifdef _POSIX_SAVED_IDS
SYSCTL_INT(_kern, KERN_SAVED_IDS, saved_ids, CTLFLAG_RD,
0, 1, "Whether saved set-group/user ID is available");
#else
SYSCTL_INT(_kern, KERN_SAVED_IDS, saved_ids, CTLFLAG_RD,
0, 0, "Whether saved set-group/user ID is available");
#endif
char kernelname[MAXPATHLEN] = "/kernel"; /* XXX bloat */
SYSCTL_STRING(_kern, KERN_BOOTFILE, bootfile, CTLFLAG_RW,
kernelname, sizeof kernelname, "Name of kernel file booted");
SYSCTL_INT(_hw, HW_NCPU, ncpu, CTLFLAG_RD,
&mp_ncpus, 0, "Number of active CPUs");
SYSCTL_INT(_hw, HW_BYTEORDER, byteorder, CTLFLAG_RD,
0, BYTE_ORDER, "System byte order");
SYSCTL_INT(_hw, HW_PAGESIZE, pagesize, CTLFLAG_RD,
0, PAGE_SIZE, "System memory page size");
static int
sysctl_hw_physmem(SYSCTL_HANDLER_ARGS)
{
u_long val;
val = ctob(physmem);
return (sysctl_handle_long(oidp, &val, 0, req));
}
SYSCTL_PROC(_hw, HW_PHYSMEM, physmem, CTLTYPE_ULONG | CTLFLAG_RD,
0, 0, sysctl_hw_physmem, "LU", "");
static int
sysctl_hw_realmem(SYSCTL_HANDLER_ARGS)
{
u_long val;
val = ctob(realmem);
return (sysctl_handle_long(oidp, &val, 0, req));
}
SYSCTL_PROC(_hw, HW_REALMEM, realmem, CTLTYPE_ULONG | CTLFLAG_RD,
0, 0, sysctl_hw_realmem, "LU", "");
static int
sysctl_hw_usermem(SYSCTL_HANDLER_ARGS)
{
u_long val;
val = ctob(physmem - cnt.v_wire_count);
return (sysctl_handle_long(oidp, &val, 0, req));
}
SYSCTL_PROC(_hw, HW_USERMEM, usermem, CTLTYPE_ULONG | CTLFLAG_RD,
0, 0, sysctl_hw_usermem, "LU", "");
SYSCTL_ULONG(_hw, OID_AUTO, availpages, CTLFLAG_RD, &physmem, 0, "");
static char machine_arch[] = MACHINE_ARCH;
SYSCTL_STRING(_hw, HW_MACHINE_ARCH, machine_arch, CTLFLAG_RD,
machine_arch, 0, "System architecture");
char hostname[MAXHOSTNAMELEN];
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
static int
sysctl_hostname(SYSCTL_HANDLER_ARGS)
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
{
struct prison *pr;
char tmphostname[MAXHOSTNAMELEN];
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
int error;
pr = req->td->td_ucred->cr_prison;
if (pr != NULL) {
if (!jail_set_hostname_allowed && req->newptr)
return (EPERM);
/*
* Process is in jail, so make a local copy of jail
* hostname to get/set so we don't have to hold the jail
* mutex during the sysctl copyin/copyout activities.
*/
mtx_lock(&pr->pr_mtx);
bcopy(pr->pr_host, tmphostname, MAXHOSTNAMELEN);
mtx_unlock(&pr->pr_mtx);
error = sysctl_handle_string(oidp, tmphostname,
sizeof pr->pr_host, req);
if (req->newptr != NULL && error == 0) {
/*
* Copy the locally set hostname to the jail, if
* appropriate.
*/
mtx_lock(&pr->pr_mtx);
bcopy(tmphostname, pr->pr_host, MAXHOSTNAMELEN);
mtx_unlock(&pr->pr_mtx);
}
} else
error = sysctl_handle_string(oidp,
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
hostname, sizeof hostname, req);
return (error);
}
SYSCTL_PROC(_kern, KERN_HOSTNAME, hostname,
This Implements the mumbled about "Jail" feature. This is a seriously beefed up chroot kind of thing. The process is jailed along the same lines as a chroot does it, but with additional tough restrictions imposed on what the superuser can do. For all I know, it is safe to hand over the root bit inside a prison to the customer living in that prison, this is what it was developed for in fact: "real virtual servers". Each prison has an ip number associated with it, which all IP communications will be coerced to use and each prison has its own hostname. Needless to say, you need more RAM this way, but the advantage is that each customer can run their own particular version of apache and not stomp on the toes of their neighbors. It generally does what one would expect, but setting up a jail still takes a little knowledge. A few notes: I have no scripts for setting up a jail, don't ask me for them. The IP number should be an alias on one of the interfaces. mount a /proc in each jail, it will make ps more useable. /proc/<pid>/status tells the hostname of the prison for jailed processes. Quotas are only sensible if you have a mountpoint per prison. There are no privisions for stopping resource-hogging. Some "#ifdef INET" and similar may be missing (send patches!) If somebody wants to take it from here and develop it into more of a "virtual machine" they should be most welcome! Tools, comments, patches & documentation most welcome. Have fun... Sponsored by: http://www.rndassociates.com/ Run for almost a year by: http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
CTLTYPE_STRING|CTLFLAG_RW|CTLFLAG_PRISON,
0, 0, sysctl_hostname, "A", "Hostname");
static int regression_securelevel_nonmonotonic = 0;
#ifdef REGRESSION
SYSCTL_INT(_regression, OID_AUTO, securelevel_nonmonotonic, CTLFLAG_RW,
&regression_securelevel_nonmonotonic, 0, "securelevel may be lowered");
#endif
int securelevel = -1;
static struct mtx securelevel_mtx;
MTX_SYSINIT(securelevel_lock, &securelevel_mtx, "securelevel mutex lock",
MTX_DEF);
static int
sysctl_kern_securelvl(SYSCTL_HANDLER_ARGS)
{
struct prison *pr;
int error, level;
pr = req->td->td_ucred->cr_prison;
/*
* If the process is in jail, return the maximum of the global and
* local levels; otherwise, return the global level. Perform a
* lockless read since the securelevel is an integer.
*/
if (pr != NULL)
level = imax(securelevel, pr->pr_securelevel);
else
level = securelevel;
error = sysctl_handle_int(oidp, &level, 0, req);
if (error || !req->newptr)
return (error);
/*
* Permit update only if the new securelevel exceeds the
* global level, and local level if any.
*/
if (pr != NULL) {
mtx_lock(&pr->pr_mtx);
if (!regression_securelevel_nonmonotonic &&
(level < imax(securelevel, pr->pr_securelevel))) {
mtx_unlock(&pr->pr_mtx);
return (EPERM);
}
pr->pr_securelevel = level;
mtx_unlock(&pr->pr_mtx);
} else {
mtx_lock(&securelevel_mtx);
if (!regression_securelevel_nonmonotonic &&
(level < securelevel)) {
mtx_unlock(&securelevel_mtx);
return (EPERM);
}
securelevel = level;
mtx_unlock(&securelevel_mtx);
}
return (error);
}
SYSCTL_PROC(_kern, KERN_SECURELVL, securelevel,
CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_PRISON, 0, 0, sysctl_kern_securelvl,
"I", "Current secure level");
char domainname[MAXHOSTNAMELEN];
SYSCTL_STRING(_kern, KERN_NISDOMAINNAME, domainname, CTLFLAG_RW,
&domainname, sizeof(domainname), "Name of the current YP/NIS domain");
u_long hostid;
SYSCTL_ULONG(_kern, KERN_HOSTID, hostid, CTLFLAG_RW, &hostid, 0, "Host ID");
char hostuuid[64] = "00000000-0000-0000-0000-000000000000";
SYSCTL_STRING(_kern, KERN_HOSTUUID, hostuuid, CTLFLAG_RW, hostuuid,
sizeof(hostuuid), "Host UUID");
/*
* This is really cheating. These actually live in the libc, something
* which I'm not quite sure is a good idea anyway, but in order for
* getnext and friends to actually work, we define dummies here.
*/
SYSCTL_STRING(_user, USER_CS_PATH, cs_path, CTLFLAG_RD,
"", 0, "PATH that finds all the standard utilities");
SYSCTL_INT(_user, USER_BC_BASE_MAX, bc_base_max, CTLFLAG_RD,
0, 0, "Max ibase/obase values in bc(1)");
SYSCTL_INT(_user, USER_BC_DIM_MAX, bc_dim_max, CTLFLAG_RD,
0, 0, "Max array size in bc(1)");
SYSCTL_INT(_user, USER_BC_SCALE_MAX, bc_scale_max, CTLFLAG_RD,
0, 0, "Max scale value in bc(1)");
SYSCTL_INT(_user, USER_BC_STRING_MAX, bc_string_max, CTLFLAG_RD,
0, 0, "Max string length in bc(1)");
SYSCTL_INT(_user, USER_COLL_WEIGHTS_MAX, coll_weights_max, CTLFLAG_RD,
0, 0, "Maximum number of weights assigned to an LC_COLLATE locale entry");
1996-09-28 15:53:30 +00:00
SYSCTL_INT(_user, USER_EXPR_NEST_MAX, expr_nest_max, CTLFLAG_RD, 0, 0, "");
SYSCTL_INT(_user, USER_LINE_MAX, line_max, CTLFLAG_RD,
0, 0, "Max length (bytes) of a text-processing utility's input line");
SYSCTL_INT(_user, USER_RE_DUP_MAX, re_dup_max, CTLFLAG_RD,
0, 0, "Maximum number of repeats of a regexp permitted");
SYSCTL_INT(_user, USER_POSIX2_VERSION, posix2_version, CTLFLAG_RD,
0, 0,
"The version of POSIX 1003.2 with which the system attempts to comply");
SYSCTL_INT(_user, USER_POSIX2_C_BIND, posix2_c_bind, CTLFLAG_RD,
0, 0, "Whether C development supports the C bindings option");
SYSCTL_INT(_user, USER_POSIX2_C_DEV, posix2_c_dev, CTLFLAG_RD,
0, 0, "Whether system supports the C development utilities option");
SYSCTL_INT(_user, USER_POSIX2_CHAR_TERM, posix2_char_term, CTLFLAG_RD,
0, 0, "");
SYSCTL_INT(_user, USER_POSIX2_FORT_DEV, posix2_fort_dev, CTLFLAG_RD,
0, 0, "Whether system supports FORTRAN development utilities");
SYSCTL_INT(_user, USER_POSIX2_FORT_RUN, posix2_fort_run, CTLFLAG_RD,
0, 0, "Whether system supports FORTRAN runtime utilities");
SYSCTL_INT(_user, USER_POSIX2_LOCALEDEF, posix2_localedef, CTLFLAG_RD,
0, 0, "Whether system supports creation of locales");
SYSCTL_INT(_user, USER_POSIX2_SW_DEV, posix2_sw_dev, CTLFLAG_RD,
0, 0, "Whether system supports software development utilities");
SYSCTL_INT(_user, USER_POSIX2_UPE, posix2_upe, CTLFLAG_RD,
0, 0, "Whether system supports the user portability utilities");
SYSCTL_INT(_user, USER_STREAM_MAX, stream_max, CTLFLAG_RD,
0, 0, "Min Maximum number of streams a process may have open at one time");
SYSCTL_INT(_user, USER_TZNAME_MAX, tzname_max, CTLFLAG_RD,
0, 0, "Min Maximum number of types supported for timezone names");
#include <sys/vnode.h>
SYSCTL_INT(_debug_sizeof, OID_AUTO, vnode, CTLFLAG_RD,
0, sizeof(struct vnode), "sizeof(struct vnode)");
SYSCTL_INT(_debug_sizeof, OID_AUTO, proc, CTLFLAG_RD,
0, sizeof(struct proc), "sizeof(struct proc)");
1999-07-20 07:19:32 +00:00
#include <sys/bio.h>
#include <sys/buf.h>
SYSCTL_INT(_debug_sizeof, OID_AUTO, bio, CTLFLAG_RD,
0, sizeof(struct bio), "sizeof(struct bio)");
SYSCTL_INT(_debug_sizeof, OID_AUTO, buf, CTLFLAG_RD,
0, sizeof(struct buf), "sizeof(struct buf)");
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
#include <sys/user.h>
SYSCTL_INT(_debug_sizeof, OID_AUTO, kinfo_proc, CTLFLAG_RD,
0, sizeof(struct kinfo_proc), "sizeof(struct kinfo_proc)");
/* XXX compatibility, remove for 6.0 */
#include <sys/imgact.h>
#include <sys/imgact_elf.h>
SYSCTL_INT(_kern, OID_AUTO, fallback_elf_brand, CTLFLAG_RW,
&__elfN(fallback_brand), sizeof(__elfN(fallback_brand)),
"compatibility for kern.fallback_elf_brand");