freebsd-skq/sys/net80211/ieee80211_node.h

157 lines
5.9 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_NODE_H_
#define _NET80211_IEEE80211_NODE_H_
#define IEEE80211_PSCAN_WAIT 5 /* passive scan wait */
#define IEEE80211_TRANS_WAIT 5 /* transition wait */
#define IEEE80211_INACT_WAIT 5 /* inactivity timer interval */
#define IEEE80211_INACT_MAX (300/IEEE80211_INACT_WAIT)
#define IEEE80211_NODE_HASHSIZE 32
/* simple hash is enough for variation of macaddr */
#define IEEE80211_NODE_HASH(addr) \
(((u_int8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % IEEE80211_NODE_HASHSIZE)
#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */
#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */
struct ieee80211_rateset {
u_int8_t rs_nrates;
u_int8_t rs_rates[IEEE80211_RATE_MAXSIZE];
};
/*
* Node specific information. Note that drivers are expected
* to derive from this structure to add device-specific per-node
* state. This is done by overriding the ic_node_* methods in
* the ieee80211com structure.
*/
struct ieee80211_node {
TAILQ_ENTRY(ieee80211_node) ni_list;
LIST_ENTRY(ieee80211_node) ni_hash;
u_int ni_refcnt;
u_int ni_scangen; /* gen# for timeout scan */
/* hardware */
u_int32_t ni_rstamp; /* recv timestamp */
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
u_int8_t ni_rssi; /* recv ssi */
/* header */
u_int8_t ni_macaddr[IEEE80211_ADDR_LEN];
u_int8_t ni_bssid[IEEE80211_ADDR_LEN];
/* beacon, probe response */
u_int8_t ni_tstamp[8]; /* from last rcv'd beacon */
u_int16_t ni_intval; /* beacon interval */
u_int16_t ni_capinfo; /* capabilities */
u_int8_t ni_esslen;
u_int8_t ni_essid[IEEE80211_NWID_LEN];
struct ieee80211_rateset ni_rates; /* negotiated rate set */
u_int8_t *ni_country; /* country information XXX */
struct ieee80211_channel *ni_chan;
u_int16_t ni_fhdwell; /* FH only */
u_int8_t ni_fhindex; /* FH only */
u_int8_t ni_erp; /* 11g only */
#ifdef notyet
/* DTIM and contention free period (CFP) */
u_int8_t ni_dtimperiod;
u_int8_t ni_cfpperiod; /* # of DTIMs between CFPs */
u_int16_t ni_cfpduremain; /* remaining cfp duration */
u_int16_t ni_cfpmaxduration;/* max CFP duration in TU */
u_int16_t ni_nextdtim; /* time to next DTIM */
u_int16_t ni_timoffset;
#endif
/* others */
u_int16_t ni_associd; /* assoc response */
u_int16_t ni_txseq; /* seq to be transmitted */
u_int16_t ni_rxseq; /* seq previous received */
int ni_fails; /* failure count to associate */
int ni_inact; /* inactivity mark count */
int ni_txrate; /* index to ni_rates[] */
};
static __inline struct ieee80211_node *
ieee80211_ref_node(struct ieee80211_node *ni)
{
atomic_add_int(&ni->ni_refcnt, 1);
return ni;
}
static __inline void
ieee80211_unref_node(struct ieee80211_node **ni)
{
atomic_subtract_int(&(*ni)->ni_refcnt, 1);
*ni = NULL; /* guard against use */
}
#define IEEE80211_NODE_LOCK_INIT(_ic, _name) \
mtx_init(&(_ic)->ic_nodelock, _name, "802.11 node table", MTX_DEF)
#define IEEE80211_NODE_LOCK_DESTROY(_ic) mtx_destroy(&(_ic)->ic_nodelock)
#define IEEE80211_NODE_LOCK(_ic) mtx_lock(&(_ic)->ic_nodelock)
#define IEEE80211_NODE_UNLOCK(_ic) mtx_unlock(&(_ic)->ic_nodelock)
#define IEEE80211_NODE_LOCK_ASSERT(_ic) \
mtx_assert(&(_ic)->ic_nodelock, MA_OWNED)
struct ieee80211com;
extern void ieee80211_node_attach(struct ifnet *);
extern void ieee80211_node_lateattach(struct ifnet *);
extern void ieee80211_node_detach(struct ifnet *);
extern void ieee80211_begin_scan(struct ifnet *);
extern void ieee80211_next_scan(struct ifnet *);
extern void ieee80211_end_scan(struct ifnet *);
extern struct ieee80211_node *ieee80211_alloc_node(struct ieee80211com *,
u_int8_t *);
extern struct ieee80211_node *ieee80211_dup_bss(struct ieee80211com *,
u_int8_t *);
extern struct ieee80211_node *ieee80211_find_node(struct ieee80211com *,
u_int8_t *);
extern struct ieee80211_node * ieee80211_lookup_node(struct ieee80211com *,
u_int8_t *macaddr, struct ieee80211_channel *);
extern void ieee80211_free_node(struct ieee80211com *,
struct ieee80211_node *);
extern void ieee80211_free_allnodes(struct ieee80211com *);
typedef void ieee80211_iter_func(void *, struct ieee80211_node *);
extern void ieee80211_iterate_nodes(struct ieee80211com *ic,
ieee80211_iter_func *, void *);
extern void ieee80211_timeout_nodes(struct ieee80211com *);
extern void ieee80211_create_ibss(struct ieee80211com* ,
struct ieee80211_channel *);
#endif /* _NET80211_IEEE80211_NODE_H_ */