d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
68031519c9
freebsd-skq/sbin/init/ttys.aarch64

50 lines
2.0 KiB
Plaintext
Raw Normal View History

Start to import support for the AArch64 architecture from ARM. This change only adds support for kernel-toolchain, however it is expected further changes to add kernel and userland support will be committed as they are reviewed. As our copy of binutils is too old the devel/aarch64-binutils port needs to be installed to pull in a linker. To build either TARGET needs to be set to arm64, or TARGET_ARCH set to aarch64. The latter is set so uname -p will return aarch64 as existing third party software expects this. Differential Revision: https://reviews.freebsd.org/D2005 Relnotes: Yes Sponsored by: The FreeBSD Foundation
2015-03-19 13:53:47 +00:00
#
# $FreeBSD$
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs. Common entries for the
# various columns include:
#
# name The name of the terminal device.
#
# getty The program to start running on the terminal. Typically a
# getty program, as the name implies. Other common entries
# include none, when no getty is needed, and xdm, to start the
# X Window System.
#
# type The initial terminal type for this port. For hardwired
# terminal lines, this will contain the type of terminal used.
# For virtual consoles, the correct type is typically xterm.
# Other common values include dialup for incoming modem ports, and
# unknown when the terminal type cannot be predetermined.
#
# status Must be on or off. If on, init will run the getty program on
# the specified port. If the word "secure" appears, this tty
# allows root login.
#
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none unknown off secure
#
For video consoles, only launch a getty if the device exists. Differential Revision: https://reviews.freebsd.org/D15169
2018-05-09 20:49:00 +00:00
ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure
Start to import support for the AArch64 architecture from ARM. This change only adds support for kernel-toolchain, however it is expected further changes to add kernel and userland support will be committed as they are reviewed. As our copy of binutils is too old the devel/aarch64-binutils port needs to be installed to pull in a linker. To build either TARGET needs to be set to arm64, or TARGET_ARCH set to aarch64. The latter is set so uname -p will return aarch64 as existing third party software expects this. Differential Revision: https://reviews.freebsd.org/D2005 Relnotes: Yes Sponsored by: The FreeBSD Foundation
2015-03-19 13:53:47 +00:00
# Virtual terminals
For video consoles, only launch a getty if the device exists. Differential Revision: https://reviews.freebsd.org/D15169
2018-05-09 20:49:00 +00:00
ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure
#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm onifexists secure
Start to import support for the AArch64 architecture from ARM. This change only adds support for kernel-toolchain, however it is expected further changes to add kernel and userland support will be committed as they are reviewed. As our copy of binutils is too old the devel/aarch64-binutils port needs to be installed to pull in a linker. To build either TARGET needs to be set to arm64, or TARGET_ARCH set to aarch64. The latter is set so uname -p will return aarch64 as existing third party software expects this. Differential Revision: https://reviews.freebsd.org/D2005 Relnotes: Yes Sponsored by: The FreeBSD Foundation
2015-03-19 13:53:47 +00:00
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
Update the arm64 ttys file to enable the correct uart based on which device the console is attached to. This makes this file identical to the 32-bit arm version of this file. Obtained from: EuroBSDCon devsummit Sponsored by: ABT Systems Ltd
2015-10-01 09:36:18 +00:00
ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure
Start to import support for the AArch64 architecture from ARM. This change only adds support for kernel-toolchain, however it is expected further changes to add kernel and userland support will be committed as they are reviewed. As our copy of binutils is too old the devel/aarch64-binutils port needs to be installed to pull in a linker. To build either TARGET needs to be set to arm64, or TARGET_ARCH set to aarch64. The latter is set so uname -p will return aarch64 as existing third party software expects this. Differential Revision: https://reviews.freebsd.org/D2005 Relnotes: Yes Sponsored by: The FreeBSD Foundation
2015-03-19 13:53:47 +00:00
# Dumb console
dcons "/usr/libexec/getty std.9600" vt100 off secure
Reference in New Issue Copy Permalink