freebsd-skq/sys/dev/mcd/mcd.c

1657 lines
40 KiB
C
Raw Normal View History

/*
* Copyright 1993 by Holger Veit (data part)
* Copyright 1993 by Brian Moore (audio part)
* Changes Copyright 1993 by Gary Clark II
* Changes Copyright (C) 1994-1995 by Andrey A. Chernov, Moscow, Russia
*
* Rewrote probe routine to work on newer Mitsumi drives.
* Additional changes (C) 1994 by Jordan K. Hubbard
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This software was developed by Holger Veit and Brian Moore
* for use with "386BSD" and similar operating systems.
* "Similar operating systems" includes mainly non-profit oriented
* systems for research and education, including but not restricted to
* "NetBSD", "FreeBSD", "Mach" (by CMU).
* 4. Neither the name of the developer(s) nor the name "386BSD"
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER(S) ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER(S) BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: mcd.c,v 1.38 1995/02/22 02:12:10 ache Exp $
*/
static char COPYRIGHT[] = "mcd-driver (C)1993 by H.Veit & B.Moore";
#include "mcd.h"
#if NMCD > 0
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/buf.h>
#include <sys/stat.h>
#include <sys/uio.h>
#include <sys/ioctl.h>
#include <sys/cdio.h>
#include <sys/errno.h>
#include <sys/dkbad.h>
#include <sys/disklabel.h>
#include <sys/devconf.h>
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/mcdreg.h>
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
#define MCD_TRACE(fmt,a,b,c,d) {if (mcd_data[unit].debug) {printf("mcd%d: status=0x%02x: ",unit,mcd_data[unit].status); printf(fmt,a,b,c,d);}}
#define mcd_part(dev) ((minor(dev)) & 7)
#define mcd_unit(dev) (((minor(dev)) & 0x38) >> 3)
#define mcd_phys(dev) (((minor(dev)) & 0x40) >> 6)
1994-08-29 21:19:27 +00:00
#define RAW_PART 2
/* flags */
#define MCDOPEN 0x0001 /* device opened */
#define MCDVALID 0x0002 /* parameters loaded */
#define MCDINIT 0x0004 /* device is init'd */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
#define MCDNEWMODEL 0x0008 /* device is new model */
#define MCDLABEL 0x0010 /* label is read */
#define MCDPROBING 0x0020 /* probing */
#define MCDREADRAW 0x0040 /* read raw mode (2352 bytes) */
#define MCDVOLINFO 0x0080 /* already read volinfo */
#define MCDTOC 0x0100 /* already read toc */
#define MCDMBXBSY 0x0200 /* local mbx is busy */
/* status */
#define MCDAUDIOBSY MCD_ST_AUDIOBSY /* playing audio */
#define MCDDSKCHNG MCD_ST_DSKCHNG /* sensed change of disk */
#define MCDDSKIN MCD_ST_DSKIN /* sensed disk in drive */
#define MCDDOOROPEN MCD_ST_DOOROPEN /* sensed door open */
/* These are apparently the different states a mitsumi can get up to */
#define MCDCDABSENT 0x0030
#define MCDCDPRESENT 0x0020
#define MCDSCLOSED 0x0080
#define MCDSOPEN 0x00a0
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
#define MCD_MD_UNKNOWN (-1)
/* toc */
#define MCD_MAXTOCS 104 /* from the Linux driver */
#define MCD_LASTPLUS1 170 /* special toc entry */
#define MCD_TYPE_UNKNOWN 0
#define MCD_TYPE_LU002S 1
#define MCD_TYPE_LU005S 2
#define MCD_TYPE_FX001 3
#define MCD_TYPE_FX001D 4
struct mcd_mbx {
short unit;
short port;
short retry;
short nblk;
int sz;
u_long skip;
struct buf *bp;
int p_offset;
short count;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
short mode;
};
struct mcd_data {
short type;
char *name;
short config;
short flags;
u_char read_command;
short status;
int blksize;
u_long disksize;
int iobase;
struct disklabel dlabel;
int partflags[MAXPARTITIONS];
int openflags;
struct mcd_volinfo volinfo;
struct mcd_qchninfo toc[MCD_MAXTOCS];
short audio_status;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
short curr_mode;
struct mcd_read2 lastpb;
short debug;
struct buf head; /* head of buf queue */
struct mcd_mbx mbx;
} mcd_data[NMCD];
/* reader state machine */
#define MCD_S_BEGIN 0
#define MCD_S_BEGIN1 1
#define MCD_S_WAITSTAT 2
#define MCD_S_WAITMODE 3
#define MCD_S_WAITREAD 4
/* prototypes */
int mcdopen(dev_t dev);
int mcdclose(dev_t dev);
void mcdstrategy(struct buf *bp);
int mcdioctl(dev_t dev, int cmd, caddr_t addr, int flags);
int mcdsize(dev_t dev);
static void mcd_done(struct mcd_mbx *mbx);
static void mcd_start(int unit);
static int mcd_getdisklabel(int unit);
static void mcd_configure(struct mcd_data *cd);
static int mcd_get(int unit, char *buf, int nmax);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int mcd_setflags(int unit,struct mcd_data *cd);
static int mcd_getstat(int unit,int sflg);
static int mcd_send(int unit, int cmd,int nretrys);
static int bcd2bin(bcd_t b);
static bcd_t bin2bcd(int b);
static void hsg2msf(int hsg, bcd_t *msf);
static int msf2hsg(bcd_t *msf);
static int mcd_volinfo(int unit);
static int mcd_waitrdy(int port,int dly);
static void mcd_doread(int state, struct mcd_mbx *mbxin);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static void mcd_soft_reset(int unit);
static int mcd_hard_reset(int unit);
static int mcd_setmode(int unit, int mode);
static int mcd_getqchan(int unit, struct mcd_qchninfo *q);
static int mcd_subchan(int unit, struct ioc_read_subchannel *sc);
static int mcd_toc_header(int unit, struct ioc_toc_header *th);
static int mcd_read_toc(int unit);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int mcd_toc_entrys(int unit, struct ioc_read_toc_entry *te);
static int mcd_stop(int unit);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int mcd_eject(int unit);
static int mcd_playtracks(int unit, struct ioc_play_track *pt);
static int mcd_play(int unit, struct mcd_read2 *pb);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int mcd_playmsf(int unit, struct ioc_play_msf *pt);
static int mcd_pause(int unit);
static int mcd_resume(int unit);
static int mcd_lock_door(int unit, int lock);
static int mcd_close_tray(int unit);
extern int hz;
extern int mcd_probe(struct isa_device *dev);
extern int mcd_attach(struct isa_device *dev);
struct isa_driver mcddriver = { mcd_probe, mcd_attach, "mcd" };
#define mcd_put(port,byte) outb(port,byte)
#define MCD_RETRYS 5
#define MCD_RDRETRYS 8
#define CLOSE_TRAY_SECS 8
#define DISK_SENSE_SECS 3
#define WAIT_FRAC 4
/* several delays */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
#define RDELAY_WAITSTAT 300
#define RDELAY_WAITMODE 300
#define RDELAY_WAITREAD 800
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
#define MIN_DELAY 15
#define DELAY_GETREPLY 1500000
static struct kern_devconf kdc_mcd[NMCD] = { {
0, 0, 0, /* filled in by dev_attach */
"mcd", 0, { MDDT_ISA, 0, "bio" },
isa_generic_externalize, 0, 0, ISA_EXTERNALLEN,
&kdc_isa0, /* parent */
0, /* parentdata */
DC_IDLE, /* status */
"Mitsumi CD-ROM controller" /* properly filled later */
} };
static inline void
mcd_registerdev(struct isa_device *id)
{
if(id->id_unit)
kdc_mcd[id->id_unit] = kdc_mcd[0];
kdc_mcd[id->id_unit].kdc_unit = id->id_unit;
kdc_mcd[id->id_unit].kdc_isa = id;
dev_attach(&kdc_mcd[id->id_unit]);
}
int mcd_attach(struct isa_device *dev)
{
struct mcd_data *cd = mcd_data + dev->id_unit;
int i;
cd->iobase = dev->id_iobase;
cd->flags |= MCDINIT;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
mcd_soft_reset(dev->id_unit);
#ifdef NOTYET
/* wire controller for interrupts and dma */
mcd_configure(cd);
#endif
mcd_registerdev(dev);
/* name filled in probe */
kdc_mcd[dev->id_unit].kdc_description = mcd_data[dev->id_unit].name;
return 1;
}
int mcdopen(dev_t dev)
{
int unit,part,phys,r,retry;
struct mcd_data *cd;
unit = mcd_unit(dev);
if (unit >= NMCD)
return ENXIO;
cd = mcd_data + unit;
part = mcd_part(dev);
phys = mcd_phys(dev);
/* not initialized*/
if (!(cd->flags & MCDINIT))
return ENXIO;
/* invalidated in the meantime? mark all open part's invalid */
if (!(cd->flags & MCDVALID) && cd->openflags)
return ENXIO;
if (mcd_close_tray(unit) == EIO) /* detect disk change too */
return EIO;
if ( (cd->status & (MCDDSKCHNG|MCDDOOROPEN))
|| !(cd->status & MCDDSKIN))
for (retry = 0; retry < DISK_SENSE_SECS * WAIT_FRAC; retry++) {
(void) tsleep((caddr_t)cd, PSOCK | PCATCH, "mcdsns", hz/WAIT_FRAC);
if ((r = mcd_getstat(unit,1)) == -1)
return EIO;
if (r != -2)
break;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->status & MCDDOOROPEN) {
printf("mcd%d: door is open\n");
return ENXIO;
}
if (!(cd->status & MCDDSKIN)) {
printf("mcd%d: no CD inside\n");
return ENXIO;
}
if (cd->status & MCDDSKCHNG) {
printf("mcd%d: CD not sensed\n");
return ENXIO;
}
if (mcdsize(dev) < 0) {
printf("mcd%d: failed to get disk size\n",unit);
return ENXIO;
} else
cd->flags |= MCDVALID;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
/* XXX get a default disklabel */
mcd_getdisklabel(unit);
MCD_TRACE("open: partition=%d, disksize = %d, blksize=%d\n",
part,cd->disksize,cd->blksize,0);
if (part == RAW_PART ||
(part < cd->dlabel.d_npartitions &&
cd->dlabel.d_partitions[part].p_fstype != FS_UNUSED)) {
cd->partflags[part] |= MCDOPEN;
cd->openflags |= (1<<part);
if (part == RAW_PART && phys != 0)
cd->partflags[part] |= MCDREADRAW;
kdc_mcd[unit].kdc_state = DC_BUSY;
(void) mcd_lock_door(unit, MCD_LK_LOCK);
if (!(cd->flags & MCDVALID))
return ENXIO;
return 0;
}
return ENXIO;
}
int mcdclose(dev_t dev)
{
int unit,part,phys;
struct mcd_data *cd;
unit = mcd_unit(dev);
if (unit >= NMCD)
return ENXIO;
cd = mcd_data + unit;
part = mcd_part(dev);
phys = mcd_phys(dev);
if (!(cd->flags & MCDINIT))
return ENXIO;
kdc_mcd[unit].kdc_state = DC_IDLE;
(void) mcd_lock_door(unit, MCD_LK_UNLOCK);
if (!(cd->flags & MCDVALID))
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return 0;
/* close channel */
cd->partflags[part] &= ~(MCDOPEN|MCDREADRAW);
cd->openflags &= ~(1<<part);
MCD_TRACE("close: partition=%d\n",part,0,0,0);
return 0;
}
void
mcdstrategy(struct buf *bp)
{
struct mcd_data *cd;
struct buf *qp;
int s;
int unit = mcd_unit(bp->b_dev);
cd = mcd_data + unit;
/* test validity */
/*MCD_TRACE("strategy: buf=0x%lx, unit=%ld, block#=%ld bcount=%ld\n",
bp,unit,bp->b_blkno,bp->b_bcount);*/
if (unit >= NMCD || bp->b_blkno < 0) {
printf("mcdstrategy: unit = %d, blkno = %d, bcount = %d\n",
unit, bp->b_blkno, bp->b_bcount);
pg("mcd: mcdstratregy failure");
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto bad;
}
/* if device invalidated (e.g. media change, door open), error */
if (!(cd->flags & MCDVALID)) {
MCD_TRACE("strategy: drive not valid\n",0,0,0,0);
bp->b_error = EIO;
goto bad;
}
/* read only */
if (!(bp->b_flags & B_READ)) {
bp->b_error = EROFS;
goto bad;
}
/* no data to read */
if (bp->b_bcount == 0)
goto done;
/* for non raw access, check partition limits */
if (mcd_part(bp->b_dev) != RAW_PART) {
if (!(cd->flags & MCDLABEL)) {
bp->b_error = EIO;
goto bad;
}
/* adjust transfer if necessary */
if (bounds_check_with_label(bp,&cd->dlabel,1) <= 0) {
goto done;
}
} else {
bp->b_pblkno = bp->b_blkno;
1994-04-30 17:03:33 +00:00
bp->b_resid = 0;
}
/* queue it */
qp = &cd->head;
s = splbio();
disksort(qp,bp);
splx(s);
/* now check whether we can perform processing */
mcd_start(unit);
return;
bad:
bp->b_flags |= B_ERROR;
done:
bp->b_resid = bp->b_bcount;
biodone(bp);
return;
}
static void mcd_start(int unit)
{
struct mcd_data *cd = mcd_data + unit;
struct buf *bp, *qp = &cd->head;
struct partition *p;
int part;
register s = splbio();
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->flags & MCDMBXBSY) {
splx(s);
return;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
}
if ((bp = qp->b_actf) != 0) {
/* block found to process, dequeue */
/*MCD_TRACE("mcd_start: found block bp=0x%x\n",bp,0,0,0);*/
qp->b_actf = bp->b_actf; /* changed from: bp->av_forw <se> */
splx(s);
} else {
/* nothing to do */
splx(s);
return;
}
/* changed media? */
if (!(cd->flags & MCDVALID)) {
MCD_TRACE("mcd_start: drive not valid\n",0,0,0,0);
return;
}
p = cd->dlabel.d_partitions + mcd_part(bp->b_dev);
cd->flags |= MCDMBXBSY;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->partflags[mcd_part(bp->b_dev)] & MCDREADRAW)
cd->flags |= MCDREADRAW;
cd->mbx.unit = unit;
cd->mbx.port = cd->iobase;
cd->mbx.retry = MCD_RETRYS;
cd->mbx.bp = bp;
cd->mbx.p_offset = p->p_offset;
/* calling the read routine */
mcd_doread(MCD_S_BEGIN,&(cd->mbx));
/* triggers mcd_start, when successful finished */
return;
}
int mcdioctl(dev_t dev, int cmd, caddr_t addr, int flags)
{
struct mcd_data *cd;
int unit,part;
unit = mcd_unit(dev);
part = mcd_part(dev);
cd = mcd_data + unit;
if (mcd_getstat(unit, 1) == -1) /* detect disk change too */
return EIO;
MCD_TRACE("ioctl called 0x%x\n",cmd,0,0,0);
switch (cmd) {
case DIOCSBAD:
if (!(cd->flags & MCDVALID))
return ENXIO;
return EINVAL;
case DIOCGDINFO:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
*(struct disklabel *) addr = cd->dlabel;
return 0;
case DIOCGPART:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
((struct partinfo *) addr)->disklab = &cd->dlabel;
((struct partinfo *) addr)->part =
&cd->dlabel.d_partitions[mcd_part(dev)];
return 0;
/*
* a bit silly, but someone might want to test something on a
* section of cdrom.
*/
case DIOCWDINFO:
case DIOCSDINFO:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((flags & FWRITE) == 0)
return EBADF;
else {
return setdisklabel(&cd->dlabel,
(struct disklabel *) addr,
0);
}
case DIOCWLABEL:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return EBADF;
case CDIOCPLAYTRACKS:
if (!(cd->flags & MCDVALID))
return ENXIO;
return mcd_playtracks(unit, (struct ioc_play_track *) addr);
case CDIOCPLAYBLOCKS:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return EINVAL;
case CDIOCPLAYMSF:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return mcd_playmsf(unit, (struct ioc_play_msf *) addr);
case CDIOCREADSUBCHANNEL:
if (!(cd->flags & MCDVALID))
return ENXIO;
return mcd_subchan(unit, (struct ioc_read_subchannel *) addr);
case CDIOREADTOCHEADER:
if (!(cd->flags & MCDVALID))
return ENXIO;
return mcd_toc_header(unit, (struct ioc_toc_header *) addr);
case CDIOREADTOCENTRYS:
if (!(cd->flags & MCDVALID))
return ENXIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return mcd_toc_entrys(unit, (struct ioc_read_toc_entry *) addr);
case CDIOCSETPATCH:
case CDIOCGETVOL:
case CDIOCSETVOL:
case CDIOCSETMONO:
case CDIOCSETSTERIO:
case CDIOCSETMUTE:
case CDIOCSETLEFT:
case CDIOCSETRIGHT:
return EINVAL;
case CDIOCRESUME:
if (!(cd->flags & MCDVALID))
return ENXIO;
return mcd_resume(unit);
case CDIOCPAUSE:
if (!(cd->flags & MCDVALID))
return ENXIO;
return mcd_pause(unit);
case CDIOCSTART:
if (!(cd->flags & MCDVALID))
return ENXIO;
return EINVAL;
case CDIOCSTOP:
if (!(cd->flags & MCDVALID))
return ENXIO;
return mcd_stop(unit);
case CDIOCEJECT:
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return mcd_eject(unit);
case CDIOCSETDEBUG:
cd->debug = 1;
return 0;
case CDIOCCLRDEBUG:
cd->debug = 0;
return 0;
case CDIOCRESET:
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return mcd_hard_reset(unit);
case CDIOCALLOW:
return mcd_lock_door(unit, MCD_LK_UNLOCK);
default:
return ENOTTY;
}
/*NOTREACHED*/
}
/* this could have been taken from scsi/cd.c, but it is not clear
* whether the scsi cd driver is linked in
*/
static int mcd_getdisklabel(int unit)
{
struct mcd_data *cd = mcd_data + unit;
if (cd->flags & MCDLABEL)
return -1;
bzero(&cd->dlabel,sizeof(struct disklabel));
/* filled with spaces first */
strncpy(cd->dlabel.d_typename," ",
sizeof(cd->dlabel.d_typename));
strncpy(cd->dlabel.d_typename, cd->name,
min(strlen(cd->name), sizeof(cd->dlabel.d_typename) - 1));
strncpy(cd->dlabel.d_packname,"unknown ",
sizeof(cd->dlabel.d_packname));
cd->dlabel.d_secsize = cd->blksize;
cd->dlabel.d_nsectors = 100;
cd->dlabel.d_ntracks = 1;
cd->dlabel.d_ncylinders = (cd->disksize/100)+1;
cd->dlabel.d_secpercyl = 100;
cd->dlabel.d_secperunit = cd->disksize;
cd->dlabel.d_rpm = 300;
cd->dlabel.d_interleave = 1;
cd->dlabel.d_flags = D_REMOVABLE;
cd->dlabel.d_npartitions= 1;
cd->dlabel.d_partitions[0].p_offset = 0;
cd->dlabel.d_partitions[0].p_size = cd->disksize;
cd->dlabel.d_partitions[0].p_fstype = 9;
cd->dlabel.d_magic = DISKMAGIC;
cd->dlabel.d_magic2 = DISKMAGIC;
cd->dlabel.d_checksum = dkcksum(&cd->dlabel);
cd->flags |= MCDLABEL;
return 0;
}
int mcdsize(dev_t dev)
{
int size;
int unit = mcd_unit(dev);
struct mcd_data *cd = mcd_data + unit;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_volinfo(unit) == 0) {
cd->blksize = MCDBLK;
size = msf2hsg(cd->volinfo.vol_msf);
cd->disksize = size * (MCDBLK/DEV_BSIZE);
return 0;
}
return -1;
}
/***************************************************************
* lower level of driver starts here
**************************************************************/
#ifdef NOTDEF
static char
irqs[] = {
0x00,0x00,0x10,0x20,0x00,0x30,0x00,0x00,
0x00,0x10,0x40,0x50,0x00,0x00,0x00,0x00
};
static char
drqs[] = {
0x00,0x01,0x00,0x03,0x00,0x05,0x06,0x07,
};
#endif
static void
mcd_configure(struct mcd_data *cd)
{
outb(cd->iobase+mcd_config,cd->config);
}
/* Wait for non-busy - return 0 on timeout */
static int
twiddle_thumbs(int port, int unit, int count, char *whine)
{
int i;
for (i = 0; i < count; i++) {
if (!(inb(port+MCD_FLAGS) & MFL_STATUS_NOT_AVAIL))
return 1;
}
printf("mcd%d: timeout %s\n", unit, whine);
return 0;
}
/* check to see if a Mitsumi CD-ROM is attached to the ISA bus */
int
mcd_probe(struct isa_device *dev)
{
int port = dev->id_iobase;
int unit = dev->id_unit;
int i, j;
int status;
unsigned char stbytes[3];
mcd_data[unit].flags = MCDPROBING;
#ifdef NOTDEF
/* get irq/drq configuration word */
mcd_data[unit].config = irqs[dev->id_irq]; /* | drqs[dev->id_drq];*/
#else
mcd_data[unit].config = 0;
#endif
/* send a reset */
outb(port+MCD_FLAGS, M_RESET);
/*
* delay awhile by getting any pending garbage (old data) and
* throwing it away.
*/
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
for (i = 1000000; i != 0; i--)
inb(port+MCD_FLAGS);
/* Get status */
outb(port+MCD_DATA, MCD_CMDGETSTAT);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (!twiddle_thumbs(port, unit, 1000000, "getting status"))
return 0; /* Timeout */
/* Get version information */
outb(port+MCD_DATA, MCD_CMDCONTINFO);
for (j = 0; j < 3; j++) {
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (!twiddle_thumbs(port, unit, 3000, "getting version info"))
return 0;
stbytes[j] = (inb(port+MCD_DATA) & 0xFF);
}
if (stbytes[1] == stbytes[2])
return 0;
if (stbytes[2] >= 4 || stbytes[1] != 'M') {
outb(port+MCD_CTRL, M_PICKLE);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
mcd_data[unit].flags |= MCDNEWMODEL;
}
mcd_data[unit].read_command = MCD_CMDSINGLESPEEDREAD;
switch (stbytes[1]) {
case 'M':
if (mcd_data[unit].flags & MCDNEWMODEL) {
mcd_data[unit].type = MCD_TYPE_LU005S;
mcd_data[unit].name = "Mitsumi LU005S";
} else {
mcd_data[unit].type = MCD_TYPE_LU002S;
mcd_data[unit].name = "Mitsumi LU002S";
}
break;
case 'F':
mcd_data[unit].type = MCD_TYPE_FX001;
mcd_data[unit].name = "Mitsumi FX001";
break;
case 'D':
mcd_data[unit].type = MCD_TYPE_FX001D;
mcd_data[unit].name = "Mitsumi FX001D";
mcd_data[unit].read_command = MCD_CMDDOUBLESPEEDREAD;
break;
default:
mcd_data[unit].type = MCD_TYPE_UNKNOWN;
mcd_data[unit].name = "Mitsumi ???";
break;
}
printf("mcd%d: type %s, version info: %c %x\n", unit, mcd_data[unit].name,
stbytes[1], stbytes[2]);
return 4;
}
static int
mcd_waitrdy(int port,int dly)
{
int i;
/* wait until flag port senses status ready */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
for (i=0; i<dly; i+=MIN_DELAY) {
if (!(inb(port+MCD_FLAGS) & MFL_STATUS_NOT_AVAIL))
return 0;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
DELAY(MIN_DELAY);
}
return -1;
}
static int
mcd_getreply(int unit,int dly)
{
int i;
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase;
/* wait data to become ready */
if (mcd_waitrdy(port,dly)<0) {
printf("mcd%d: timeout getreply\n",unit);
return -1;
}
/* get the data */
return inb(port+mcd_status) & 0xFF;
}
static int
mcd_getstat(int unit,int sflg)
{
int i;
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase;
/* get the status */
if (sflg)
outb(port+mcd_command, MCD_CMDGETSTAT);
i = mcd_getreply(unit,DELAY_GETREPLY);
if (i<0 || (i & MCD_ST_CMDCHECK)) {
cd->curr_mode = MCD_MD_UNKNOWN;
return -1;
}
cd->status = i;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_setflags(unit,cd) < 0)
return -2;
return cd->status;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int
mcd_setflags(int unit, struct mcd_data *cd)
{
/* check flags */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ( (cd->status & (MCDDSKCHNG|MCDDOOROPEN))
|| !(cd->status & MCDDSKIN)) {
MCD_TRACE("setflags: sensed DSKCHNG or DOOROPEN or !DSKIN\n",0,0,0,0);
mcd_soft_reset(unit);
return -1;
}
if (cd->status & MCDAUDIOBSY)
cd->audio_status = CD_AS_PLAY_IN_PROGRESS;
else if (cd->audio_status == CD_AS_PLAY_IN_PROGRESS)
cd->audio_status = CD_AS_PLAY_COMPLETED;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return 0;
}
static int
mcd_get(int unit, char *buf, int nmax)
{
int port = mcd_data[unit].iobase;
int i,k;
for (i=0; i<nmax; i++) {
/* wait for data */
if ((k = mcd_getreply(unit,DELAY_GETREPLY)) < 0) {
printf("mcd%d: timeout mcd_get\n",unit);
return -1;
}
buf[i] = k;
}
return i;
}
static int
mcd_send(int unit, int cmd,int nretrys)
{
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
int i,k=0;
int port = mcd_data[unit].iobase;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
/*MCD_TRACE("mcd_send: command = 0x%02x\n",cmd,0,0,0);*/
for (i=0; i<nretrys; i++) {
outb(port+mcd_command, cmd);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((k=mcd_getstat(unit,0)) != -1)
break;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
}
if (k == -2) {
printf("mcd%d: media changed\n",unit);
return -1;
}
if (i == nretrys) {
printf("mcd%d: mcd_send retry cnt exceeded\n",unit);
return -1;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
/*MCD_TRACE("mcd_send: done\n",0,0,0,0);*/
return 0;
}
static int
bcd2bin(bcd_t b)
{
return (b >> 4) * 10 + (b & 15);
}
static bcd_t
bin2bcd(int b)
{
return ((b / 10) << 4) | (b % 10);
}
static void
hsg2msf(int hsg, bcd_t *msf)
{
hsg += 150;
M_msf(msf) = bin2bcd(hsg / 4500);
hsg %= 4500;
S_msf(msf) = bin2bcd(hsg / 75);
F_msf(msf) = bin2bcd(hsg % 75);
}
static int
msf2hsg(bcd_t *msf)
{
return (bcd2bin(M_msf(msf)) * 60 +
bcd2bin(S_msf(msf))) * 75 +
bcd2bin(F_msf(msf)) - 150;
}
static int
mcd_volinfo(int unit)
{
struct mcd_data *cd = mcd_data + unit;
int i;
/* Just return if we already have it */
if (cd->flags & MCDVOLINFO) return 0;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
/*MCD_TRACE("mcd_volinfo: enter\n",0,0,0,0);*/
/* send volume info command */
if (mcd_send(unit,MCD_CMDGETVOLINFO,MCD_RETRYS) < 0)
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return EIO;
/* get data */
if (mcd_get(unit,(char*) &cd->volinfo,sizeof(struct mcd_volinfo)) < 0) {
printf("mcd%d: mcd_volinfo: error read data\n",unit);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return EIO;
}
if (cd->volinfo.trk_low > 0 &&
cd->volinfo.trk_high >= cd->volinfo.trk_low
) {
cd->flags |= MCDVOLINFO; /* volinfo is OK */
return 0;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return EINVAL;
}
void
mcdintr(unit)
int unit;
{
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
MCD_TRACE("stray interrupt\n",0,0,0,0);
}
/* state machine to process read requests
* initialize with MCD_S_BEGIN: calculate sizes, and read status
* MCD_S_WAITSTAT: wait for status reply, set mode
* MCD_S_WAITMODE: waits for status reply from set mode, set read command
* MCD_S_WAITREAD: wait for read ready, read data
*/
static struct mcd_mbx *mbxsave;
static void
mcd_doread(int state, struct mcd_mbx *mbxin)
{
struct mcd_mbx *mbx = (state!=MCD_S_BEGIN) ? mbxsave : mbxin;
int unit = mbx->unit;
int port = mbx->port;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
int com_port = mbx->port + mcd_command;
int data_port = mbx->port + mcd_rdata;
struct buf *bp = mbx->bp;
struct mcd_data *cd = mcd_data + unit;
int rm,i,k;
struct mcd_read2 rbuf;
int blknum;
caddr_t addr;
loop:
switch (state) {
case MCD_S_BEGIN:
mbx = mbxsave = mbxin;
case MCD_S_BEGIN1:
retry_status:
/* get status */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
outb(com_port, MCD_CMDGETSTAT);
mbx->count = RDELAY_WAITSTAT;
timeout((timeout_func_t)mcd_doread,
(caddr_t)MCD_S_WAITSTAT,hz/100); /* XXX */
return;
case MCD_S_WAITSTAT:
untimeout((timeout_func_t)mcd_doread,(caddr_t)MCD_S_WAITSTAT);
if (mbx->count-- >= 0) {
if (inb(port+MCD_FLAGS) & MFL_STATUS_NOT_AVAIL) {
timeout((timeout_func_t)mcd_doread,
(caddr_t)MCD_S_WAITSTAT,hz/100); /* XXX */
return;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->status = inb(port+mcd_status) & 0xFF;
if (cd->status & MCD_ST_CMDCHECK)
goto retry_status;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_setflags(unit,cd) < 0)
goto changed;
MCD_TRACE("got WAITSTAT delay=%d\n",
RDELAY_WAITSTAT-mbx->count,0,0,0);
/* reject, if audio active */
if (cd->status & MCDAUDIOBSY) {
printf("mcd%d: audio is active\n",unit);
goto readerr;
}
retry_mode:
/* to check for raw/cooked mode */
if (cd->flags & MCDREADRAW) {
rm = MCD_MD_RAW;
mbx->sz = MCDRBLK;
} else {
rm = MCD_MD_COOKED;
mbx->sz = cd->blksize;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (rm == cd->curr_mode)
goto modedone;
mbx->count = RDELAY_WAITMODE;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->curr_mode = MCD_MD_UNKNOWN;
mbx->mode = rm;
mcd_put(com_port, MCD_CMDSETMODE);
mcd_put(com_port, rm);
timeout((timeout_func_t)mcd_doread,
(caddr_t)MCD_S_WAITMODE,hz/100); /* XXX */
return;
} else {
printf("mcd%d: timeout getstatus\n",unit);
goto readerr;
}
case MCD_S_WAITMODE:
untimeout((timeout_func_t)mcd_doread,(caddr_t)MCD_S_WAITMODE);
if (mbx->count-- < 0) {
printf("mcd%d: timeout set mode\n",unit);
goto readerr;
}
if (inb(port+MCD_FLAGS) & MFL_STATUS_NOT_AVAIL) {
timeout((timeout_func_t)mcd_doread,(caddr_t)MCD_S_WAITMODE,hz/100);
return;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->status = inb(port+mcd_status) & 0xFF;
if (cd->status & MCD_ST_CMDCHECK) {
cd->curr_mode = MCD_MD_UNKNOWN;
goto retry_mode;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_setflags(unit,cd) < 0)
goto changed;
cd->curr_mode = mbx->mode;
MCD_TRACE("got WAITMODE delay=%d\n",
RDELAY_WAITMODE-mbx->count,0,0,0);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
modedone:
/* for first block */
mbx->nblk = (bp->b_bcount + (mbx->sz-1)) / mbx->sz;
mbx->skip = 0;
nextblock:
blknum = (bp->b_blkno / (mbx->sz/DEV_BSIZE))
+ mbx->p_offset + mbx->skip/mbx->sz;
MCD_TRACE("mcd_doread: read blknum=%d for bp=0x%x\n",
blknum,bp,0,0);
/* build parameter block */
hsg2msf(blknum,rbuf.start_msf);
retry_read:
/* send the read command */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
disable_intr();
mcd_put(com_port,cd->read_command);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
mcd_put(com_port,rbuf.start_msf[0]);
mcd_put(com_port,rbuf.start_msf[1]);
mcd_put(com_port,rbuf.start_msf[2]);
mcd_put(com_port,0);
mcd_put(com_port,0);
mcd_put(com_port,1);
enable_intr();
/* Spin briefly (<= 2ms) to avoid missing next block */
for (i = 0; i < 20; i++) {
k = inb(port+MCD_FLAGS);
if (!(k & MFL_DATA_NOT_AVAIL))
goto got_it;
DELAY(100);
}
mbx->count = RDELAY_WAITREAD;
timeout((timeout_func_t)mcd_doread,
(caddr_t)MCD_S_WAITREAD,hz/100); /* XXX */
return;
case MCD_S_WAITREAD:
untimeout((timeout_func_t)mcd_doread,(caddr_t)MCD_S_WAITREAD);
if (mbx->count-- > 0) {
k = inb(port+MCD_FLAGS);
if (!(k & MFL_DATA_NOT_AVAIL)) { /* XXX */
MCD_TRACE("got data delay=%d\n",
RDELAY_WAITREAD-mbx->count,0,0,0);
got_it:
/* data is ready */
addr = bp->b_un.b_addr + mbx->skip;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
outb(port+mcd_ctl2,0x04); /* XXX */
for (i=0; i<mbx->sz; i++)
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
*addr++ = inb(data_port);
outb(port+mcd_ctl2,0x0c); /* XXX */
k = inb(port+MCD_FLAGS);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
/* If we still have some junk, read it too */
if (!(k & MFL_DATA_NOT_AVAIL)) {
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
outb(port+mcd_ctl2,0x04); /* XXX */
(void)inb(data_port);
(void)inb(data_port);
outb(port+mcd_ctl2,0x0c); /* XXX */
}
if (--mbx->nblk > 0) {
mbx->skip += mbx->sz;
goto nextblock;
}
/* return buffer */
bp->b_resid = 0;
biodone(bp);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->flags &= ~(MCDMBXBSY|MCDREADRAW);
mcd_start(mbx->unit);
return;
}
if (!(k & MFL_STATUS_NOT_AVAIL)) {
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->status = inb(port+mcd_status) & 0xFF;
if (cd->status & MCD_ST_CMDCHECK)
goto retry_read;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_setflags(unit,cd) < 0)
goto changed;
}
timeout((timeout_func_t)mcd_doread,
(caddr_t)MCD_S_WAITREAD,hz/100); /* XXX */
return;
} else {
printf("mcd%d: timeout read data\n",unit);
goto readerr;
}
}
readerr:
if (mbx->retry-- > 0) {
printf("mcd%d: retrying\n",unit);
state = MCD_S_BEGIN1;
goto loop;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
harderr:
/* invalidate the buffer */
bp->b_flags |= B_ERROR;
bp->b_resid = bp->b_bcount;
biodone(bp);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->flags &= ~(MCDMBXBSY|MCDREADRAW);
mcd_start(mbx->unit);
return;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
changed:
printf("mcd%d: media changed\n", unit);
goto harderr;
#ifdef NOTDEF
printf("mcd%d: unit timeout, resetting\n",mbx->unit);
outb(mbx->port+mcd_reset,MCD_CMDRESET);
DELAY(300000);
(void)mcd_getstat(mbx->unit,1);
(void)mcd_getstat(mbx->unit,1);
/*cd->status &= ~MCDDSKCHNG; */
cd->debug = 1; /* preventive set debug mode */
#endif
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int
mcd_lock_door(int unit, int lock)
{
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase;
outb(port+mcd_command, MCD_CMDLOCKDRV);
outb(port+mcd_command, lock);
if (mcd_getstat(unit,0) == -1)
return EIO;
return 0;
}
static int
mcd_close_tray(int unit)
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
{
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase;
int retry, r;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_getstat(unit,1) == -1)
return EIO;
if (cd->status & MCDDOOROPEN) {
outb(port+mcd_command, MCD_CMDCLOSETRAY);
for (retry = 0; retry < CLOSE_TRAY_SECS * WAIT_FRAC; retry++) {
if (inb(port+MCD_FLAGS) & MFL_STATUS_NOT_AVAIL)
(void) tsleep((caddr_t)cd, PSOCK | PCATCH, "mcdcls", hz/WAIT_FRAC);
else {
if ((r = mcd_getstat(unit,0)) == -1)
return EIO;
return 0;
}
}
return ENXIO;
}
return 0;
}
static int
mcd_eject(int unit)
{
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase, r;
if (mcd_getstat(unit,1) == -1) /* detect disk change too */
return EIO;
if (cd->status & MCDDOOROPEN)
return mcd_close_tray(unit);
if ((r = mcd_stop(unit)) == EIO)
return r;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
outb(port+mcd_command, MCD_CMDEJECTDISK);
if (mcd_getstat(unit,0) == -1)
return EIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return 0;
}
static int
mcd_hard_reset(int unit)
{
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase;
outb(port+mcd_reset,MCD_CMDRESET);
cd->curr_mode = MCD_MD_UNKNOWN;
cd->audio_status = CD_AS_AUDIO_INVALID;
return 0;
}
static void
mcd_soft_reset(int unit)
{
struct mcd_data *cd = mcd_data + unit;
int i;
cd->openflags = 0;
cd->flags &= (MCDINIT|MCDPROBING|MCDNEWMODEL);
cd->curr_mode = MCD_MD_UNKNOWN;
for (i=0; i<MAXPARTITIONS; i++) cd->partflags[i] = 0;
cd->audio_status = CD_AS_AUDIO_INVALID;
}
static int
mcd_setmode(int unit, int mode)
{
struct mcd_data *cd = mcd_data + unit;
int port = cd->iobase;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
int retry, st;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->curr_mode == mode)
return 0;
if (cd->debug)
printf("mcd%d: setting mode to %d\n", unit, mode);
for(retry=0; retry<MCD_RETRYS; retry++)
{
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
cd->curr_mode = MCD_MD_UNKNOWN;
outb(port+mcd_command, MCD_CMDSETMODE);
outb(port+mcd_command, mode);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((st = mcd_getstat(unit, 0)) >= 0) {
cd->curr_mode = mode;
return 0;
}
if (st == -2) {
printf("mcd%d: media changed\n", unit);
break;
}
}
return -1;
}
static int
mcd_toc_header(int unit, struct ioc_toc_header *th)
{
struct mcd_data *cd = mcd_data + unit;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
int r;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((r = mcd_volinfo(unit)) != 0)
return r;
th->len = msf2hsg(cd->volinfo.vol_msf);
th->starting_track = bcd2bin(cd->volinfo.trk_low);
th->ending_track = bcd2bin(cd->volinfo.trk_high);
return 0;
}
static int
mcd_read_toc(int unit)
{
struct mcd_data *cd = mcd_data + unit;
struct ioc_toc_header th;
struct mcd_qchninfo q;
int rc, trk, idx, retry;
/* Only read TOC if needed */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->flags & MCDTOC)
return 0;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
printf("mcd%d: reading toc header\n", unit);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((rc = mcd_toc_header(unit, &th)) != 0)
return rc;
if (mcd_send(unit, MCD_CMDSTOPAUDIO, MCD_RETRYS) < 0)
return EIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_setmode(unit, MCD_MD_TOC) != 0)
return EIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
printf("mcd%d: get_toc reading qchannel info\n",unit);
for(trk=th.starting_track; trk<=th.ending_track; trk++)
cd->toc[trk].idx_no = 0;
trk = th.ending_track - th.starting_track + 1;
for(retry=0; retry<600 && trk>0; retry++)
{
if (mcd_getqchan(unit, &q) < 0) break;
idx = bcd2bin(q.idx_no);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (idx>=th.starting_track && idx<=th.ending_track && q.trk_no==0) {
if (cd->toc[idx].idx_no == 0) {
cd->toc[idx] = q;
trk--;
}
}
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_setmode(unit, MCD_MD_COOKED) != 0)
return EIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (trk != 0)
return ENXIO;
/* add a fake last+1 */
idx = th.ending_track + 1;
cd->toc[idx].ctrl_adr = cd->toc[idx-1].ctrl_adr;
cd->toc[idx].trk_no = 0;
cd->toc[idx].idx_no = 0xAA;
cd->toc[idx].hd_pos_msf[0] = cd->volinfo.vol_msf[0];
cd->toc[idx].hd_pos_msf[1] = cd->volinfo.vol_msf[1];
cd->toc[idx].hd_pos_msf[2] = cd->volinfo.vol_msf[2];
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
{ int i;
for (i = th.starting_track; i <= idx; i++)
printf("mcd%d: trk %d idx %d pos %d %d %d\n",
unit, i,
cd->toc[i].idx_no,
bcd2bin(cd->toc[i].hd_pos_msf[0]),
bcd2bin(cd->toc[i].hd_pos_msf[1]),
bcd2bin(cd->toc[i].hd_pos_msf[2]));
}
cd->flags |= MCDTOC;
return 0;
}
static int
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
mcd_toc_entrys(int unit, struct ioc_read_toc_entry *te)
{
struct mcd_data *cd = mcd_data + unit;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
struct cd_toc_entry entries[MCD_MAXTOCS];
struct ioc_toc_header th;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
int rc, i, len = te->data_len;
/* Make sure we have a valid toc */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((rc=mcd_read_toc(unit)) != 0)
return rc;
/* find the toc to copy*/
i = te->starting_track;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (i == MCD_LASTPLUS1)
i = bcd2bin(cd->volinfo.trk_high) + 1;
/* verify starting track */
if (i < bcd2bin(cd->volinfo.trk_low) ||
i > bcd2bin(cd->volinfo.trk_high)+1) {
return EINVAL;
}
/* do we have room */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ( len > sizeof(entries)
|| len < sizeof(struct cd_toc_entry)
|| (len % sizeof(struct cd_toc_entry)) != 0
)
return EINVAL;
/* Copy the toc header */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((rc = mcd_toc_header(unit, &th)) != 0)
return rc;
do {
/* copy the toc data */
entries[i-1].control = cd->toc[i].ctrl_adr;
entries[i-1].addr_type = te->address_format;
entries[i-1].track = i;
if (te->address_format == CD_MSF_FORMAT) {
entries[i-1].addr.msf.unused = 0;
entries[i-1].addr.msf.minute = bcd2bin(cd->toc[i].hd_pos_msf[0]);
entries[i-1].addr.msf.second = bcd2bin(cd->toc[i].hd_pos_msf[1]);
entries[i-1].addr.msf.frame = bcd2bin(cd->toc[i].hd_pos_msf[2]);
}
len -= sizeof(struct cd_toc_entry);
i++;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
while (len > 0 && i <= th.ending_track + 2);
/* copy the data back */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (copyout(entries, te->data, (i - 1) * sizeof(struct cd_toc_entry)) != 0)
return EFAULT;
return 0;
}
static int
mcd_stop(int unit)
{
struct mcd_data *cd = mcd_data + unit;
/* Verify current status */
if (cd->audio_status != CD_AS_PLAY_IN_PROGRESS &&
cd->audio_status != CD_AS_PLAY_PAUSED) {
if (cd->debug)
printf("mcd%d: stop attempted when not playing\n", unit);
return EINVAL;
}
if (cd->audio_status == CD_AS_PLAY_IN_PROGRESS)
if (mcd_send(unit, MCD_CMDSTOPAUDIO, MCD_RETRYS) < 0)
return EIO;
cd->audio_status = CD_AS_PLAY_COMPLETED;
return 0;
}
static int
mcd_getqchan(int unit, struct mcd_qchninfo *q)
{
struct mcd_data *cd = mcd_data + unit;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_send(unit, MCD_CMDGETQCHN, MCD_RETRYS) < 0)
return -1;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_get(unit, (char *) q, sizeof(struct mcd_qchninfo)) < 0)
return -1;
if (cd->debug) {
printf("mcd%d: getqchan ctrl_adr=0x%x trk=%d ind=%d ttm=%d:%d.%d dtm=%d:%d.%d\n",
unit,
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
q->ctrl_adr, bcd2bin(q->trk_no), bcd2bin(q->idx_no),
bcd2bin(q->trk_size_msf[0]), bcd2bin(q->trk_size_msf[1]),
bcd2bin(q->trk_size_msf[2]),
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
bcd2bin(q->hd_pos_msf[0]), bcd2bin(q->hd_pos_msf[1]),
bcd2bin(q->hd_pos_msf[2]));
}
return 0;
}
static int
mcd_subchan(int unit, struct ioc_read_subchannel *sc)
{
struct mcd_data *cd = mcd_data + unit;
struct mcd_qchninfo q;
struct cd_sub_channel_info data;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
printf("mcd%d: subchan af=%d, df=%d\n", unit,
sc->address_format,
sc->data_format);
if (sc->address_format != CD_MSF_FORMAT &&
sc->address_format != CD_LBA_FORMAT)
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
return EINVAL;
if (sc->data_format != CD_CURRENT_POSITION)
return EINVAL;
if (mcd_setmode(unit, MCD_MD_COOKED) != 0)
return EIO;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_getqchan(unit, &q) < 0)
return EIO;
data.header.audio_status = cd->audio_status;
data.what.position.data_format = CD_CURRENT_POSITION;
data.what.position.addr_type = q.ctrl_adr;
data.what.position.control = q.ctrl_adr >> 4;
data.what.position.track_number = bcd2bin(q.trk_no);
data.what.position.index_number = bcd2bin(q.idx_no);
if (sc->address_format == CD_MSF_FORMAT) {
data.what.position.reladdr.msf.unused = 0;
data.what.position.reladdr.msf.minute = bcd2bin(q.trk_size_msf[0]);
data.what.position.reladdr.msf.second = bcd2bin(q.trk_size_msf[1]);
data.what.position.reladdr.msf.frame = bcd2bin(q.trk_size_msf[2]);
data.what.position.absaddr.msf.unused = 0;
data.what.position.absaddr.msf.minute = bcd2bin(q.hd_pos_msf[0]);
data.what.position.absaddr.msf.second = bcd2bin(q.hd_pos_msf[1]);
data.what.position.absaddr.msf.frame = bcd2bin(q.hd_pos_msf[2]);
} else if (sc->address_format == CD_LBA_FORMAT) {
data.what.position.reladdr.lba = msf2hsg(q.trk_size_msf);
data.what.position.absaddr.lba = msf2hsg(q.hd_pos_msf);
}
if (copyout(&data, sc->data, min(sizeof(struct cd_sub_channel_info), sc->data_len))!=0)
return EFAULT;
return 0;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
static int
mcd_playmsf(int unit, struct ioc_play_msf *pt)
{
struct mcd_read2 pb;
if (mcd_setmode(unit, MCD_MD_COOKED) != 0)
return EIO;
pb.start_msf[0] = bin2bcd(pt->start_m);
pb.start_msf[1] = bin2bcd(pt->start_s);
pb.start_msf[2] = bin2bcd(pt->start_f);
pb.end_msf[0] = bin2bcd(pt->end_m);
pb.end_msf[1] = bin2bcd(pt->end_s);
pb.end_msf[2] = bin2bcd(pt->end_f);
return mcd_play(unit, &pb);
}
static int
mcd_playtracks(int unit, struct ioc_play_track *pt)
{
struct mcd_data *cd = mcd_data + unit;
struct mcd_read2 pb;
int a = pt->start_track;
int z = pt->end_track;
int rc, i;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((rc = mcd_read_toc(unit)) != 0)
return rc;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
printf("mcd%d: playtracks from %d:%d to %d:%d\n", unit,
a, pt->start_index, z, pt->end_index);
if ( a < bcd2bin(cd->volinfo.trk_low)
|| a > bcd2bin(cd->volinfo.trk_high)
|| a > z
|| z < bcd2bin(cd->volinfo.trk_low)
|| z > bcd2bin(cd->volinfo.trk_high))
return EINVAL;
for (i = 0; i < 3; i++) {
pb.start_msf[i] = cd->toc[a].hd_pos_msf[i];
pb.end_msf[i] = cd->toc[z+1].hd_pos_msf[i];
}
return mcd_play(unit, &pb);
}
static int
mcd_play(int unit, struct mcd_read2 *pb)
{
struct mcd_data *cd = mcd_data + unit;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
int com_port = cd->iobase + mcd_command;
int retry, st = -1, status;
cd->lastpb = *pb;
for(retry=0; retry<MCD_RETRYS; retry++) {
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
disable_intr();
outb(com_port, MCD_CMDSINGLESPEEDREAD);
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
outb(com_port, pb->start_msf[0]);
outb(com_port, pb->start_msf[1]);
outb(com_port, pb->start_msf[2]);
outb(com_port, pb->end_msf[0]);
outb(com_port, pb->end_msf[1]);
outb(com_port, pb->end_msf[2]);
enable_intr();
status=mcd_getstat(unit, 0);
if (status == -1)
continue;
else if (status != -2)
st = 0;
break;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (status == -2) {
printf("mcd%d: media changed\n", unit);
return ENXIO;
}
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
printf("mcd%d: mcd_play retry=%d, status=0x%02x\n", unit, retry, status);
if (st < 0)
return ENXIO;
cd->audio_status = CD_AS_PLAY_IN_PROGRESS;
return 0;
}
static int
mcd_pause(int unit)
{
struct mcd_data *cd = mcd_data + unit;
struct mcd_qchninfo q;
int rc;
/* Verify current status */
if (cd->audio_status != CD_AS_PLAY_IN_PROGRESS) {
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->debug)
printf("mcd%d: pause attempted when not playing\n", unit);
return EINVAL;
}
/* Get the current position */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (mcd_getqchan(unit, &q) < 0)
return EIO;
/* Copy it into lastpb */
cd->lastpb.start_msf[0] = q.hd_pos_msf[0];
cd->lastpb.start_msf[1] = q.hd_pos_msf[1];
cd->lastpb.start_msf[2] = q.hd_pos_msf[2];
/* Stop playing */
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if ((rc=mcd_stop(unit)) != 0)
return rc;
/* Set the proper status and exit */
cd->audio_status = CD_AS_PLAY_PAUSED;
return 0;
}
static int
mcd_resume(int unit)
{
struct mcd_data *cd = mcd_data + unit;
Newly implemented ioctls list: DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET, CDIOCEJECT. CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't know how to implement it correctly). All routines now detects media change correctly. DELAY_GETREPLAY increased for long time access from first track to last. mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs of machine speed. mcd_doread() now uses real status (old code uses obsoleted soft copy of it). clear XBSY on error in mcd_doread() mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio() optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode. call getdisklabel() _after_ mcdsize() for proper sizes mcdopen(): old code forget to set MCDREADRAW in flags when open RAW partition, doread check it for setting RAW CD mode. Do nothing on stray interrupt (which sometimes occurse, because driver read data block too slow, DOS driver use 'insb' here). Old stray code cause timeouts. Read toc entries code rewritten to return many requested entries (as supposed) instead of one entry with incorrect structure. CMDREAD2 requests covered with disable_intr()/enable_intr() (from DOS driver) Read junk code added after read block code in doread (from DOS driver) mcd_read_toc() code fixed to read all needed entries, old code cause some audio tracks is not played. mcd_playtracks() code fixed to proper check valid track range. New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00
if (cd->audio_status != CD_AS_PLAY_PAUSED)
return EINVAL;
return mcd_play(unit, &cd->lastpb);
}
#endif /* NMCD > 0 */