543 lines
13 KiB
Plaintext
543 lines
13 KiB
Plaintext
|
/*
|
||
|
|
* P5020DS Device Tree Source
|
||
|
|
*
|
||
|
|
* Copyright 2010-2011 Freescale Semiconductor Inc.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions are met:
|
||
|
|
* * Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer.
|
||
|
|
* * Redistributions in binary form must reproduce the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
|
* documentation and/or other materials provided with the distribution.
|
||
|
|
* * Neither the name of Freescale Semiconductor nor the
|
||
|
|
* names of its contributors may be used to endorse or promote products
|
||
|
|
* derived from this software without specific prior written permission.
|
||
|
|
*
|
||
|
|
*
|
||
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
||
|
|
* Foundation, either version 2 of that License or (at your option) any
|
||
|
|
* later version.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
/* $FreeBSD$ */
|
||
|
|
|
||
|
|
/include/ "p5020si.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "fsl,P5020DS";
|
||
|
|
compatible = "fsl,P5020DS";
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
interrupt-parent = <&mpic>;
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
phy_rgmii_0 = &phy_rgmii_0;
|
||
|
|
phy_rgmii_1 = &phy_rgmii_1;
|
||
|
|
phy_sgmii_1c = &phy_sgmii_1c;
|
||
|
|
phy_sgmii_1d = &phy_sgmii_1d;
|
||
|
|
phy_sgmii_1e = &phy_sgmii_1e;
|
||
|
|
phy_sgmii_1f = &phy_sgmii_1f;
|
||
|
|
phy_xgmii_1 = &phy_xgmii_1;
|
||
|
|
phy_xgmii_2 = &phy_xgmii_2;
|
||
|
|
emi1_rgmii = &hydra_mdio_rgmii;
|
||
|
|
emi1_sgmii = &hydra_mdio_sgmii;
|
||
|
|
emi2_xgmii = &hydra_mdio_xgmii;
|
||
|
|
};
|
||
|
|
|
||
|
|
memory {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dcsr: dcsr@f00000000 {
|
||
|
|
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
bman-portals@ff4000000 {
|
||
|
|
bman-portal@0 {
|
||
|
|
cpu-handle = <&cpu0>;
|
||
|
|
};
|
||
|
|
bman-portal@4000 {
|
||
|
|
cpu-handle = <&cpu1>;
|
||
|
|
};
|
||
|
|
bman-portal@8000 {
|
||
|
|
};
|
||
|
|
bman-portal@c000 {
|
||
|
|
};
|
||
|
|
bman-portal@10000 {
|
||
|
|
};
|
||
|
|
bman-portal@14000 {
|
||
|
|
};
|
||
|
|
bman-portal@18000 {
|
||
|
|
};
|
||
|
|
bman-portal@1c000 {
|
||
|
|
};
|
||
|
|
bman-portal@20000 {
|
||
|
|
};
|
||
|
|
bman-portal@24000 {
|
||
|
|
};
|
||
|
|
|
||
|
|
buffer-pool@0 {
|
||
|
|
compatible = "fsl,p5020-bpool", "fsl,bpool";
|
||
|
|
fsl,bpid = <0>;
|
||
|
|
fsl,bpool-cfg = <0 0x100 0 1 0 0x100>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
qman-portals@ff4200000 {
|
||
|
|
qportal0: qman-portal@0 {
|
||
|
|
cpu-handle = <&cpu0>;
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal1: qman-portal@4000 {
|
||
|
|
cpu-handle = <&cpu1>;
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal2: qman-portal@8000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal3: qman-portal@c000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal4: qman-portal@10000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal5: qman-portal@14000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal6: qman-portal@18000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal7: qman-portal@1c000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal8: qman-portal@20000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
|
||
|
|
qportal9: qman-portal@24000 {
|
||
|
|
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
|
||
|
|
&qpool4 &qpool5 &qpool6
|
||
|
|
&qpool7 &qpool8 &qpool9
|
||
|
|
&qpool10 &qpool11 &qpool12
|
||
|
|
&qpool13 &qpool14 &qpool15>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
soc: soc@ffe000000 {
|
||
|
|
spi@110000 {
|
||
|
|
flash@0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "spansion,s25sl12801";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <40000000>; /* input clock */
|
||
|
|
partition@u-boot {
|
||
|
|
label = "u-boot";
|
||
|
|
reg = <0x00000000 0x00100000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
partition@kernel {
|
||
|
|
label = "kernel";
|
||
|
|
reg = <0x00100000 0x00500000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
partition@dtb {
|
||
|
|
label = "dtb";
|
||
|
|
reg = <0x00600000 0x00100000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
partition@fs {
|
||
|
|
label = "file system";
|
||
|
|
reg = <0x00700000 0x00900000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@118100 {
|
||
|
|
eeprom@51 {
|
||
|
|
compatible = "at24,24c256";
|
||
|
|
reg = <0x51>;
|
||
|
|
};
|
||
|
|
eeprom@52 {
|
||
|
|
compatible = "at24,24c256";
|
||
|
|
reg = <0x52>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@119100 {
|
||
|
|
rtc@68 {
|
||
|
|
compatible = "dallas,ds3232";
|
||
|
|
reg = <0x68>;
|
||
|
|
interrupts = <0x1 0x1 0 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pme: pme@316000 {
|
||
|
|
/* Commented out, use default allocation */
|
||
|
|
/* fsl,pme-pdsr = <0x0 0x23000000 0x0 0x01000000>; */
|
||
|
|
/* fsl,pme-sre = <0x0 0x24000000 0x0 0x00a00000>; */
|
||
|
|
};
|
||
|
|
|
||
|
|
qman: qman@318000 {
|
||
|
|
/* Commented out, use default allocation */
|
||
|
|
/* fsl,qman-fqd = <0x0 0x20000000 0x0 0x01000000>; */
|
||
|
|
/* fsl,qman-pfdr = <0x0 0x21000000 0x0 0x01000000>; */
|
||
|
|
};
|
||
|
|
|
||
|
|
bman: bman@31a000 {
|
||
|
|
/* Same as fsl,qman-*, use default allocation */
|
||
|
|
/* fsl,bman-fbpr = <0x0 0x22000000 0x0 0x01000000>; */
|
||
|
|
};
|
||
|
|
|
||
|
|
fman0: fman@400000 {
|
||
|
|
enet0: ethernet@e0000 {
|
||
|
|
tbi-handle = <&tbi0>;
|
||
|
|
phy-handle = <&phy_rgmii_0>;
|
||
|
|
phy-connection-type = "rgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio0: mdio@e1120 {
|
||
|
|
tbi0: tbi-phy@8 {
|
||
|
|
reg = <0x8>;
|
||
|
|
device_type = "tbi-phy";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Virtual MDIO for the two on-board RGMII
|
||
|
|
* ports. The fsl,hydra-mdio-muxval property
|
||
|
|
* is already correct.
|
||
|
|
*/
|
||
|
|
hydra_mdio_rgmii: hydra-mdio-rgmii {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "fsl,hydra-mdio";
|
||
|
|
fsl,mdio-handle = <&mdio0>;
|
||
|
|
fsl,hydra-mdio-muxval = <0x00>;
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
phy_rgmii_0: ethernet-phy@0 {
|
||
|
|
reg = <0x0>;
|
||
|
|
};
|
||
|
|
phy_rgmii_1: ethernet-phy@1 {
|
||
|
|
reg = <0x1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Virtual MDIO for the four-port SGMII card.
|
||
|
|
* The fsl,hydra-mdio-muxval property will be
|
||
|
|
* fixed-up by U-Boot based on the slot that
|
||
|
|
* the SGMII card is in.
|
||
|
|
*
|
||
|
|
* Note: we do not support DTSEC5 connected to
|
||
|
|
* SGMII, so this is the only SGMII node.
|
||
|
|
*/
|
||
|
|
hydra_mdio_sgmii: hydra-mdio-sgmii {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "fsl,hydra-mdio";
|
||
|
|
fsl,mdio-handle = <&mdio0>;
|
||
|
|
fsl,hydra-mdio-muxval = <0x00>;
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
phy_sgmii_1c: ethernet-phy@1c {
|
||
|
|
reg = <0x1c>;
|
||
|
|
};
|
||
|
|
phy_sgmii_1d: ethernet-phy@1d {
|
||
|
|
reg = <0x1d>;
|
||
|
|
};
|
||
|
|
phy_sgmii_1e: ethernet-phy@1e {
|
||
|
|
reg = <0x1e>;
|
||
|
|
};
|
||
|
|
phy_sgmii_1f: ethernet-phy@1f {
|
||
|
|
reg = <0x1f>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
enet1: ethernet@e2000 {
|
||
|
|
tbi-handle = <&tbi1>;
|
||
|
|
phy-handle = <&phy_sgmii_1d>;
|
||
|
|
phy-connection-type = "sgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio@e3120 {
|
||
|
|
tbi1: tbi-phy@8 {
|
||
|
|
reg = <8>;
|
||
|
|
device_type = "tbi-phy";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
enet2: ethernet@e4000 {
|
||
|
|
tbi-handle = <&tbi2>;
|
||
|
|
phy-handle = <&phy_sgmii_1e>;
|
||
|
|
phy-connection-type = "sgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio@e5120 {
|
||
|
|
tbi2: tbi-phy@8 {
|
||
|
|
reg = <8>;
|
||
|
|
device_type = "tbi-phy";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
enet3: ethernet@e6000 {
|
||
|
|
tbi-handle = <&tbi3>;
|
||
|
|
phy-handle = <&phy_sgmii_1f>;
|
||
|
|
phy-connection-type = "sgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio@e7120 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "fsl,fman-tbi";
|
||
|
|
reg = <0xe7120 0xee0>;
|
||
|
|
interrupts = <100 1 0 0>;
|
||
|
|
|
||
|
|
tbi3: tbi-phy@8 {
|
||
|
|
reg = <8>;
|
||
|
|
device_type = "tbi-phy";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
enet4: ethernet@e8000 {
|
||
|
|
tbi-handle = <&tbi4>;
|
||
|
|
phy-handle = <&phy_rgmii_1>;
|
||
|
|
phy-connection-type = "rgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio@e9120 {
|
||
|
|
tbi4: tbi-phy@8 {
|
||
|
|
reg = <8>;
|
||
|
|
device_type = "tbi-phy";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
enet5: ethernet@f0000 {
|
||
|
|
/*
|
||
|
|
* phy-handle will be updated by U-Boot to
|
||
|
|
* reflect the actual slot the XAUI card is in.
|
||
|
|
*/
|
||
|
|
phy-handle = <&phy_xgmii_1>;
|
||
|
|
phy-connection-type = "xgmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* We only support one XAUI card, so the MDIO muxing
|
||
|
|
* is set by U-Boot, and Linux never touches it.
|
||
|
|
* Therefore, we don't need a virtual MDIO node.
|
||
|
|
* However, the phy address depends on the slot, so
|
||
|
|
* only one of the ethernet-phy nodes below will be
|
||
|
|
* used.
|
||
|
|
*/
|
||
|
|
hydra_mdio_xgmii: mdio@f1000 {
|
||
|
|
status = "disabled";
|
||
|
|
|
||
|
|
/* XAUI card in slot 1 */
|
||
|
|
phy_xgmii_1: ethernet-phy@4 {
|
||
|
|
reg = <0x4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* XAUI card in slot 2 */
|
||
|
|
phy_xgmii_2: ethernet-phy@0 {
|
||
|
|
reg = <0x0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
rapidio@ffe0c0000 {
|
||
|
|
reg = <0xf 0xfe0c0000 0 0x11000>;
|
||
|
|
|
||
|
|
port1 {
|
||
|
|
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
|
||
|
|
};
|
||
|
|
port2 {
|
||
|
|
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
localbus@ffe124000 {
|
||
|
|
reg = <0xf 0xfe124000 0 0x1000>;
|
||
|
|
ranges = <0 0 0xf 0xb8000000 0x04000000>;
|
||
|
|
|
||
|
|
flash@0,0 {
|
||
|
|
compatible = "cfi-flash";
|
||
|
|
/*
|
||
|
|
* Map 64Mb of 128MB NOR flash memory. Since highest
|
||
|
|
* line of address of NOR flash memory are set by
|
||
|
|
* FPGA, memory are divided into two pages equal to
|
||
|
|
* 64MB. One of the pages can be accessed at once.
|
||
|
|
*/
|
||
|
|
reg = <0 0 0x04000000>;
|
||
|
|
bank-width = <2>;
|
||
|
|
device-width = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
nand@2,0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "fsl,elbc-fcm-nand";
|
||
|
|
reg = <0x2 0x0 0x40000>;
|
||
|
|
|
||
|
|
partition@0 {
|
||
|
|
label = "NAND U-Boot Image";
|
||
|
|
reg = <0x0 0x02000000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@2000000 {
|
||
|
|
label = "NAND Root File System";
|
||
|
|
reg = <0x02000000 0x10000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@12000000 {
|
||
|
|
label = "NAND Compressed RFS Image";
|
||
|
|
reg = <0x12000000 0x08000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@1a000000 {
|
||
|
|
label = "NAND Linux Kernel Image";
|
||
|
|
reg = <0x1a000000 0x04000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@1e000000 {
|
||
|
|
label = "NAND DTB Image";
|
||
|
|
reg = <0x1e000000 0x01000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@1f000000 {
|
||
|
|
label = "NAND Writable User area";
|
||
|
|
reg = <0x1f000000 0x21000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
board-control@3,0 {
|
||
|
|
compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
|
||
|
|
reg = <3 0 0x30>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pci0: pcie@ffe200000 {
|
||
|
|
reg = <0xf 0xfe200000 0 0x1000>;
|
||
|
|
ranges = <0x02000000 0 0x80000000 0x0 0x80000000 0x0 0x10000000
|
||
|
|
0x01000000 0 0x00000000 0x0 0xff000000 0x0 0x00010000>;
|
||
|
|
pcie@0 {
|
||
|
|
ranges = <0x02000000 0 0x80000000
|
||
|
|
0x02000000 0 0x80000000
|
||
|
|
0 0x10000000
|
||
|
|
|
||
|
|
0x01000000 0 0x00000000
|
||
|
|
0x01000000 0 0xff000000
|
||
|
|
0 0x00010000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pci1: pcie@ffe201000 {
|
||
|
|
reg = <0xf 0xfe201000 0 0x1000>;
|
||
|
|
ranges = <0x02000000 0x0 0x90000000 0x0 0x90000000 0x0 0x10000000
|
||
|
|
0x01000000 0x0 0x00000000 0x0 0xff010000 0x0 0x00010000>;
|
||
|
|
pcie@0 {
|
||
|
|
ranges = <0x02000000 0 0x90000000
|
||
|
|
0x02000000 0 0x90000000
|
||
|
|
0 0x10000000
|
||
|
|
|
||
|
|
0x01000000 0 0x00000000
|
||
|
|
0x01000000 0 0xff010000
|
||
|
|
0 0x00010000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pci2: pcie@ffe202000 {
|
||
|
|
reg = <0xf 0xfe202000 0 0x1000>;
|
||
|
|
ranges = <0x02000000 0 0xa0000000 0x0 0xa0000000 0 0x10000000
|
||
|
|
0x01000000 0 0x00000000 0x0 0xff020000 0 0x00010000>;
|
||
|
|
pcie@0 {
|
||
|
|
ranges = <0x02000000 0 0xa0000000
|
||
|
|
0x02000000 0 0xa0000000
|
||
|
|
0 0x10000000
|
||
|
|
|
||
|
|
0x01000000 0 0x00000000
|
||
|
|
0x01000000 0 0xff020000
|
||
|
|
0 0x00010000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pci3: pcie@ffe203000 {
|
||
|
|
reg = <0xf 0xfe203000 0 0x1000>;
|
||
|
|
ranges = <0x02000000 0 0xb0000000 0x0 0xb0000000 0 0x08000000
|
||
|
|
0x01000000 0 0x00000000 0x0 0xff030000 0 0x00010000>;
|
||
|
|
pcie@0 {
|
||
|
|
ranges = <0x02000000 0 0xb0000000
|
||
|
|
0x02000000 0 0xb0000000
|
||
|
|
0 0x08000000
|
||
|
|
|
||
|
|
0x01000000 0 0x00000000
|
||
|
|
0x01000000 0 0xff030000
|
||
|
|
0 0x00010000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdin = "serial0";
|
||
|
|
stdout = "serial0";
|
||
|
|
};
|
||
|
|
};
|