d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6b773dff30
freebsd-skq/sys/netinet/ip_output.c

2049 lines
50 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1988, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ip_output.c 8.3 (Berkeley) 1/21/94
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Don't expect the new code to be used without the right option file being included.
1998-07-06 05:04:33 +00:00
#include "opt_ipfw.h"
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
#include "opt_ipsec.h"
Introduce support for Mandatory Access Control and extensible kernel access control. When fragmenting an IP datagram, invoke an appropriate MAC entry point so that MAC labels may be copied (...) to the individual IP fragment mbufs by MAC policies. When IP options are inserted into an IP datagram when leaving a host, preserve the label if we need to reallocate the mbuf for alignment or size reasons. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-31 17:21:01 +00:00
#include "opt_mac.h"
Rename MBUF_FRAG_TEST to MBUF_STRESS_TEST as it will be extended to include more than just frag tests.
2003-04-12 06:11:46 +00:00
#include "opt_mbuf_stress_test.h"
Make IPDIVERT a supported option. Alas, in_var.h depends on it, i hope i've found out all files that actually depend on this dependancy. IMHO, it's not very good practice to change the size of internal structs depending on kernel options.
1997-11-05 20:17:23 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
#include <sys/systm.h>
Restore 1.82->1.83 change deleted by mistake< per Bruce suggestion
1998-12-21 21:36:40 +00:00
#include <sys/kernel.h>
Introduce support for Mandatory Access Control and extensible kernel access control. When fragmenting an IP datagram, invoke an appropriate MAC entry point so that MAC labels may be copied (...) to the individual IP fragment mbufs by MAC policies. When IP options are inserted into an IP datagram when leaving a host, preserve the label if we need to reallocate the mbuf for alignment or size reasons. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-31 17:21:01 +00:00
#include <sys/mac.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
Add the MBUF_FRAG_TEST option. When compiled in, this option allows you to tell ip_output to fragment all outgoing packets into mbuf fragments of size net.inet.ip.mbuf_frag_size bytes. This is an excellent way to test if network drivers can properly handle long mbuf chains being passed to them. net.inet.ip.mbuf_frag_size defaults to 0 (no fragmentation) so that you can at least boot before your network driver dies. :)
2003-03-25 05:45:05 +00:00
#include <sys/sysctl.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <net/if.h>
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
#include <net/netisr.h>
Always compile PFIL_HOOKS into the kernel and remove the associated kernel compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and thus it becomes a standard part of the network stack. If no hooks are connected the entire packet filter hooks section and related activities are jumped over. This removes any performance impact if no hooks are active. Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
#include <net/pfil.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_pcb.h>
#include <netinet/in_var.h>
#include <netinet/ip_var.h>
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
#include <machine/in_cksum.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Last major round (Unless Bruce thinks of somthing :-) of malloc changes. Distribute all but the most fundamental malloc types. This time I also remembered the trick to making things static: Put "static" in front of them. A couple of finer points by: bde
1997-10-12 20:26:33 +00:00
static MALLOC_DEFINE(M_IPMOPTS, "ip_moptions", "internet multicast options");
Distribute and statizice a lot of the malloc M_* types. Substantial input from: bde
1997-10-11 18:31:40 +00:00
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
#ifdef IPSEC
#include <netinet6/ipsec.h>
#include <netkey/key.h>
#ifdef IPSEC_DEBUG
#include <netkey/key_debug.h>
#else
#define KEYDEBUG(lev,arg)
#endif
#endif /*IPSEC*/
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
#ifdef FAST_IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/xform.h>
#include <netipsec/key.h>
#endif /*FAST_IPSEC*/
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
#define print_ip(x, a, y) printf("%s %d.%d.%d.%d%s",\
x, (ntohl(a.s_addr)>>24)&0xFF,\
(ntohl(a.s_addr)>>16)&0xFF,\
(ntohl(a.s_addr)>>8)&0xFF,\
(ntohl(a.s_addr))&0xFF, y);
Support for IPFW based transparent forwarding. Any packet that can be matched by a ipfw rule can be redirected transparently to another port or machine. Redirection to another port mostly makes sense with tcp, where a session can be set up between a proxy and an unsuspecting client. Redirection to another machine requires that the other machine also be expecting to receive the forwarded packets, as their headers will not have been modified. /sbin/ipfw must be recompiled!!! Reviewed by: Peter Wemm <peter@freebsd.org> Submitted by: Chrisy Luke <chrisy@flix.net>
1998-07-06 03:20:19 +00:00
Fix up some sloppy coding practices: - Delete redundant declarations. - Add -Wredundant-declarations to Makefile.i386 so they don't come back. - Delete sloppy COMMON-style declarations of uninitialized data in header files. - Add a few prototypes. - Clean up warnings resulting from the above. NB: ioconf.c will still generate a redundant-declaration warning, which is unavoidable unless somebody volunteers to make `config' smarter.
1994-08-18 22:36:09 +00:00
u_short ip_id;
Rename MBUF_FRAG_TEST to MBUF_STRESS_TEST as it will be extended to include more than just frag tests.
2003-04-12 06:11:46 +00:00
#ifdef MBUF_STRESS_TEST
Add the MBUF_FRAG_TEST option. When compiled in, this option allows you to tell ip_output to fragment all outgoing packets into mbuf fragments of size net.inet.ip.mbuf_frag_size bytes. This is an excellent way to test if network drivers can properly handle long mbuf chains being passed to them. net.inet.ip.mbuf_frag_size defaults to 0 (no fragmentation) so that you can at least boot before your network driver dies. :)
2003-03-25 05:45:05 +00:00
int mbuf_frag_size = 0;
SYSCTL_INT(_net_inet_ip, OID_AUTO, mbuf_frag_size, CTLFLAG_RW,
&mbuf_frag_size, 0, "Fragment outgoing mbufs to this size");
#endif
Remove __P.
2002-03-19 21:25:46 +00:00
static struct mbuf *ip_insertoptions(struct mbuf *, struct mbuf *, int *);
static struct ifnet *ip_multicast_if(struct in_addr *, int *);
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
static void ip_mloopback
Remove __P.
2002-03-19 21:25:46 +00:00
(struct ifnet *, struct mbuf *, struct sockaddr_in *, int);
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
static int ip_getmoptions(struct inpcb *, struct sockopt *);
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
static int ip_pcbopts(struct inpcb *, int, struct mbuf *);
Push the inpcb argument into ip_setmoptions() when setting IP multicast socket options, so that it is available for locking.
2004-12-05 21:38:33 +00:00
static int ip_setmoptions(struct inpcb *, struct sockopt *);
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
static struct ip_moptions *ip_findmoptions(struct inpcb *inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Remove __P.
2002-03-19 21:25:46 +00:00
int ip_optcopy(struct ip *, struct ip *);
Add IP Filter hooks (from patches).
1997-02-10 11:45:37 +00:00
Adding changes to ipfw and the kernel to support ip packet diversion.. This stuff should not be too destructive if the IPDIVERT is not compiled in.. be aware that this changes the size of the ip_fw struct so ipfw needs to be recompiled to use it.. more changes coming to clean this up.
1996-07-10 19:44:30 +00:00
extern struct protosw inetsw[];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* IP output. The packet in mbuf chain m contains a skeletal IP
* header (with len, off, ttl, proto, tos, src, dst).
* The mbuf chain containing the packet will be freed.
* The mbuf opt, if present, will not be freed.
Note that when ip_output() is called from ip_forward(), it will already have its options inserted, so the opt argument to ip_output() must be NULL.
2003-11-03 18:03:05 +00:00
* In the IP forwarding case, the packet will arrive with options already
* inserted, so must have a NULL opt pointer.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
int
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
ip_output(struct mbuf *m, struct mbuf *opt, struct route *ro,
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
int flags, struct ip_moptions *imo, struct inpcb *inp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
struct ip *ip;
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
struct ifnet *ifp = NULL; /* keep compiler happy */
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
struct mbuf *m0;
Add feature for tcp "established". Change interface between netinet and ip_fw to be more general, and thus hopefully also support other ip filtering implementations.
1996-04-03 13:52:20 +00:00
int hlen = sizeof (struct ip);
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
int len, error = 0;
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
struct sockaddr_in *dst = NULL; /* keep compiler happy */
Avoid dereferencing a null pointer in ro_rt. This was always broken in HEAD (the offending statement was introduced in rev. 1.123 for HEAD, while RELENG_4 included this fix (in rev. 1.99.2.12 for RELENG_4) and I inadvertently deleted it in 1.99.2.30. So I am also restoring these two lines in RELENG_4 now. We might need another few things from 1.99.2.30.
2002-07-12 22:08:47 +00:00
struct in_ifaddr *ia = NULL;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
int isbroadcast, sw_csum;
Prevent icmp_reflect() from calling ip_output() with a NULL route pointer which will then result in the allocated route's reference count never being decremented. Just flood ping the localhost and watch refcnt of the 127.0.0.1 route with netstat(1). Submitted by: jayanth Back out ip_output.c,v 1.143 and ip_mroute.c,v 1.69 that allowed ip_output() to be called with a NULL route pointer. The previous paragraph shows why this was a bad idea in the first place. MFC after: 0 days
2002-03-22 16:45:54 +00:00
struct route iproute;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
struct in_addr odst;
#ifdef IPFIREWALL_FORWARD
struct m_tag *fwd_tag = NULL;
#endif
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
#ifdef IPSEC
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
struct secpolicy *sp = NULL;
#endif
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
#ifdef FAST_IPSEC
struct secpolicy *sp = NULL;
struct tdb_ident *tdbi;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
struct m_tag *mtag;
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
int s;
#endif /* FAST_IPSEC */
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
Introduce an M_ASSERTPKTHDR() macro which performs the very common task of asserting that an mbuf has a packet header. Use it instead of hand- rolled versions wherever applicable. Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
M_ASSERTPKTHDR(m);
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
if (ro == NULL) {
ro = &iproute;
bzero(ro, sizeof (*ro));
}
assert optional inpcb is passed in locked Supported by: FreeBSD Foundation
2003-11-08 23:03:29 +00:00
if (inp != NULL)
INP_LOCK_ASSERT(inp);
- Change the newly turned INVARIANTS #ifdef blocks (they were changed from DIAGNOSTIC yesterday) into KASSERT()'s as these help to increase code readability.
2002-05-21 18:52:24 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (opt) {
Slightly rearrange a code in rev. 1.164: o Move len initialization closer to place of its first usage. o Compare len with 0 to improve readability. o Explicitly zero out phlen in ip_insertoptions() in failure case. Suggested by: jhb Reviewed by: jhb MFC after: 2 weeks
2002-09-23 08:56:24 +00:00
len = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m = ip_insertoptions(m, opt, &len);
Slightly rearrange a code in rev. 1.164: o Move len initialization closer to place of its first usage. o Compare len with 0 to improve readability. o Explicitly zero out phlen in ip_insertoptions() in failure case. Suggested by: jhb Reviewed by: jhb MFC after: 2 weeks
2002-09-23 08:56:24 +00:00
if (len != 0)
In rare cases when there is no room for ip options ip_insertoptions() can fail and corrupt a header length. Initialize len and check what ip_insertoptions() returns. Reviewed by: archie, silence on -net MFC after: 5 days
2002-09-17 11:13:04 +00:00
hlen = len;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
ip = mtod(m, struct ip *);
Fix ipfw fwd so that it acts as the docs say when forwarding an incoming packet to another machine. Obtained from: Vicor Production tree MFC after: 3 weeks
2001-12-28 21:21:57 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Don't generate an ip_id for packets with the DF bit set; ip_id is only meaningful for fragments. Also don't bother to byte-swap the ip_id when we do generate it; it is only used at the receiver as a nonce. I tried several different permutations of this code with no measurable difference to each other or to the unmodified version, so I've settled on the one for which gcc seems to generate the best code. (If anyone cares to microoptimize this differently for an architecture where it actually matters, feel free.) Suggested by: Steve Bellovin's paper in IMW'02
2003-05-31 17:55:21 +00:00
* Fill in IP header. If we are not allowing fragmentation,
Do not set the ip_id to zero when DF is set on packet and restore the general pre-randomid behaviour. Setting the ip_id to zero causes several problems with packet reassembly when a device along the path removes the DF bit for some reason. Other BSD and Linux have found and fixed the same issues. PR: kern/60889 Tested by: Richard Wendland <richard@wendland.org.uk> Approved by: re (scottl)
2004-01-08 11:13:40 +00:00
* then the ip_id field is meaningless, but we don't set it
* to zero. Doing so causes various problems when devices along
* the path (routers, load balancers, firewalls, etc.) illegally
* disable DF on our packet. Note that a 16-bit counter
Don't generate an ip_id for packets with the DF bit set; ip_id is only meaningful for fragments. Also don't bother to byte-swap the ip_id when we do generate it; it is only used at the receiver as a nonce. I tried several different permutations of this code with no measurable difference to each other or to the unmodified version, so I've settled on the one for which gcc seems to generate the best code. (If anyone cares to microoptimize this differently for an architecture where it actually matters, feel free.) Suggested by: Steve Bellovin's paper in IMW'02
2003-05-31 17:55:21 +00:00
* will wrap around in less than 10 seconds at 100 Mbit/s on a
* medium with MTU 1500. See Steven M. Bellovin, "A Technique
* for Counting NATted Hosts", Proc. IMW'02, available at
* <http://www.research.att.com/~smb/papers/fnat.pdf>.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if ((flags & (IP_FORWARDING|IP_RAWOUTPUT)) == 0) {
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
ip->ip_v = IPVERSION;
ip->ip_hl = hlen >> 2;
Get rid of the RANDOM_IP_ID option and make it a sysctl. NetBSD have already done this, so I have styled the patch on their work: 1) introduce a ip_newid() static inline function that checks the sysctl and then decides if it should return a sequential or random IP ID. 2) named the sysctl net.inet.ip.random_id 3) IPv6 flow IDs and fragment IDs are now always random. Flow IDs and frag IDs are significantly less common in the IPv6 world (ie. rarely generated per-packet), so there should be smaller performance concerns. The sysctl defaults to 0 (sequential IP IDs). Reviewed by: andre, silby, mlaier, ume Based on: NetBSD MFC after: 2 months
2004-08-14 15:32:40 +00:00
ip->ip_id = ip_newid();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ipstat.ips_localout++;
} else {
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
hlen = ip->ip_hl << 2;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
dst = (struct sockaddr_in *)&ro->ro_dst;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
again:
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If there is a cached route,
* check that it is to the same destination
* and is still up. If not, free it and try again.
- Check the address family of the destination cached in a PCB. - Clear the cached destination before getting another cached route. Otherwise, garbage in the padding space (which might be filled in if it was used for IPv4) could annoy rtalloc. Obtained from: KAME
2002-01-21 20:04:22 +00:00
* The address family should also be checked in case of sharing the
* cache with IPv6.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (ro->ro_rt && ((ro->ro_rt->rt_flags & RTF_UP) == 0 ||
- Check the address family of the destination cached in a PCB. - Clear the cached destination before getting another cached route. Otherwise, garbage in the padding space (which might be filled in if it was used for IPv4) could annoy rtalloc. Obtained from: KAME
2002-01-21 20:04:22 +00:00
dst->sin_family != AF_INET ||
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
dst->sin_addr.s_addr != ip->ip_dst.s_addr)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
RTFREE(ro->ro_rt);
ro->ro_rt = (struct rtentry *)0;
}
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
#ifdef IPFIREWALL_FORWARD
if (ro->ro_rt == NULL && fwd_tag == NULL) {
#else
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (ro->ro_rt == NULL) {
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
#endif
- Check the address family of the destination cached in a PCB. - Clear the cached destination before getting another cached route. Otherwise, garbage in the padding space (which might be filled in if it was used for IPv4) could annoy rtalloc. Obtained from: KAME
2002-01-21 20:04:22 +00:00
bzero(dst, sizeof(*dst));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
dst->sin_family = AF_INET;
dst->sin_len = sizeof(*dst);
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
dst->sin_addr = ip->ip_dst;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* If routing to interface only,
* short circuit routing lookup.
*/
if (flags & IP_ROUTETOIF) {
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if ((ia = ifatoia(ifa_ifwithdstaddr(sintosa(dst)))) == NULL &&
(ia = ifatoia(ifa_ifwithnet(sintosa(dst)))) == NULL) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ipstat.ips_noroute++;
error = ENETUNREACH;
goto bad;
}
ifp = ia->ia_ifp;
ip->ip_ttl = 1;
Add three new route flags to help determine what sort of address the destination represents. For IP: - Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local (belongs to this host) and broadcast addresses, respectively. - For all routes, RTF_MULTICAST is set if the destination is multicast. The RTF_BROADCAST flag is used by ip_output() to eliminate a call to in_broadcast() in a common case; this gives about 1% in our packet-generation experiments. All three flags might be used (although they aren't now) to determine whether a packet can be forwarded; a given host route can represent a forwardable address if: (rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST)) == RTF_HOST Obviously, one still has to do all the work if a host route is not present, but this code allows one to cache the results of such a lookup if rtalloc1() is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
isbroadcast = in_broadcast(dst->sin_addr, ifp);
Skip the route checking in the case of multicast packets with known interfaces. Reviewed by: people at that channel Approved by: silence on -net
2001-07-17 18:47:48 +00:00
} else if (IN_MULTICAST(ntohl(ip->ip_dst.s_addr)) &&
Avoid a NULL pointer derefence introduced in rev. 1.129. Problem noticed by: bde, gcc(1) Panic caught by: mjacob Patch tested by: mjacob
2001-07-23 16:50:01 +00:00
imo != NULL && imo->imo_multicast_ifp != NULL) {
Skip the route checking in the case of multicast packets with known interfaces. Reviewed by: people at that channel Approved by: silence on -net
2001-07-17 18:47:48 +00:00
/*
Avoid a NULL pointer derefence introduced in rev. 1.129. Problem noticed by: bde, gcc(1) Panic caught by: mjacob Patch tested by: mjacob
2001-07-23 16:50:01 +00:00
* Bypass the normal routing lookup for multicast
* packets if the interface is specified.
Skip the route checking in the case of multicast packets with known interfaces. Reviewed by: people at that channel Approved by: silence on -net
2001-07-17 18:47:48 +00:00
*/
Avoid a NULL pointer derefence introduced in rev. 1.129. Problem noticed by: bde, gcc(1) Panic caught by: mjacob Patch tested by: mjacob
2001-07-23 16:50:01 +00:00
ifp = imo->imo_multicast_ifp;
IFP_TO_IA(ifp, ia);
isbroadcast = 0; /* fool gcc */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else {
Call rtalloc_ign() so that protocol cloning will not occur at the IP layer.
1994-12-13 23:08:12 +00:00
/*
Introduce tcp_hostcache and remove the tcp specific metrics from the routing table. Move all usage and references in the tcp stack from the routing table metrics to the tcp hostcache. It caches measured parameters of past tcp sessions to provide better initial start values for following connections from or to the same source or destination. Depending on the network parameters to/from the remote host this can lead to significant speedups for new tcp connections after the first one because they inherit and shortcut the learning curve. tcp_hostcache is designed for multiple concurrent access in SMP environments with high contention and is hash indexed by remote ip address. It removes significant locking requirements from the tcp stack with regard to the routing table. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 20:07:39 +00:00
* We want to do any cloning requested by the link layer,
* as this is probably required in all cases for correct
* operation (as it is for ARP).
Call rtalloc_ign() so that protocol cloning will not occur at the IP layer.
1994-12-13 23:08:12 +00:00
*/
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (ro->ro_rt == NULL)
In an effort to simplify the routing code, try to deprecate rtalloc() in favour of rtalloc_ign(), which is what would end up being called anyways. There are 25 more instances of rtalloc() in net*/ and about 10 instances of rtalloc_ign()
2004-04-14 01:13:14 +00:00
rtalloc_ign(ro, 0);
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (ro->ro_rt == NULL) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ipstat.ips_noroute++;
error = EHOSTUNREACH;
goto bad;
}
ia = ifatoia(ro->ro_rt->rt_ifa);
ifp = ro->ro_rt->rt_ifp;
Introduce tcp_hostcache and remove the tcp specific metrics from the routing table. Move all usage and references in the tcp stack from the routing table metrics to the tcp hostcache. It caches measured parameters of past tcp sessions to provide better initial start values for following connections from or to the same source or destination. Depending on the network parameters to/from the remote host this can lead to significant speedups for new tcp connections after the first one because they inherit and shortcut the learning curve. tcp_hostcache is designed for multiple concurrent access in SMP environments with high contention and is hash indexed by remote ip address. It removes significant locking requirements from the tcp stack with regard to the routing table. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 20:07:39 +00:00
ro->ro_rt->rt_rmx.rmx_pksent++;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ro->ro_rt->rt_flags & RTF_GATEWAY)
Backout non-functional changes from revision 1.128. Not objected to by: dcs
2001-07-19 07:10:30 +00:00
dst = (struct sockaddr_in *)ro->ro_rt->rt_gateway;
Add three new route flags to help determine what sort of address the destination represents. For IP: - Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local (belongs to this host) and broadcast addresses, respectively. - For all routes, RTF_MULTICAST is set if the destination is multicast. The RTF_BROADCAST flag is used by ip_output() to eliminate a call to in_broadcast() in a common case; this gives about 1% in our packet-generation experiments. All three flags might be used (although they aren't now) to determine whether a packet can be forwarded; a given host route can represent a forwardable address if: (rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST)) == RTF_HOST Obviously, one still has to do all the work if a host route is not present, but this code allows one to cache the results of such a lookup if rtalloc1() is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
if (ro->ro_rt->rt_flags & RTF_HOST)
Backout non-functional changes from revision 1.128. Not objected to by: dcs
2001-07-19 07:10:30 +00:00
isbroadcast = (ro->ro_rt->rt_flags & RTF_BROADCAST);
Add three new route flags to help determine what sort of address the destination represents. For IP: - Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local (belongs to this host) and broadcast addresses, respectively. - For all routes, RTF_MULTICAST is set if the destination is multicast. The RTF_BROADCAST flag is used by ip_output() to eliminate a call to in_broadcast() in a common case; this gives about 1% in our packet-generation experiments. All three flags might be used (although they aren't now) to determine whether a packet can be forwarded; a given host route can represent a forwardable address if: (rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST)) == RTF_HOST Obviously, one still has to do all the work if a host route is not present, but this code allows one to cache the results of such a lookup if rtalloc1() is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
else
isbroadcast = in_broadcast(dst->sin_addr, ifp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (IN_MULTICAST(ntohl(ip->ip_dst.s_addr))) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct in_multi *inm;
m->m_flags |= M_MCAST;
/*
* IP destination address is multicast. Make sure "dst"
* still points to the address in "ro". (It may have been
* changed to point to a gateway address, above.)
*/
dst = (struct sockaddr_in *)&ro->ro_dst;
/*
* See if the caller provided any multicast options
*/
if (imo != NULL) {
ip->ip_ttl = imo->imo_multicast_ttl;
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
if (imo->imo_multicast_vif != -1)
ip->ip_src.s_addr =
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
ip_mcast_src ?
ip_mcast_src(imo->imo_multicast_vif) :
INADDR_ANY;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else
ip->ip_ttl = IP_DEFAULT_MULTICAST_TTL;
/*
* Confirm that the outgoing interface supports multicast.
*/
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
if ((imo == NULL) || (imo->imo_multicast_vif == -1)) {
if ((ifp->if_flags & IFF_MULTICAST) == 0) {
ipstat.ips_noroute++;
error = ENETUNREACH;
goto bad;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* If source address not specified yet, use address
* of outgoing interface.
*/
if (ip->ip_src.s_addr == INADDR_ANY) {
Avoid a NULL pointer derefence introduced in rev. 1.129. Problem noticed by: bde, gcc(1) Panic caught by: mjacob Patch tested by: mjacob
2001-07-23 16:50:01 +00:00
/* Interface may have no addresses. */
if (ia != NULL)
ip->ip_src = IA_SIN(ia)->sin_addr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Introduce in_multi_mtx, which will protect IPv4-layer multicast address lists, as well as accessor macros. For now, this is a recursive mutex due code sequences where IPv4 multicast calls into IGMP calls into ip_output(), which then tests for a multicast forwarding case. For support macros in in_var.h to check multicast address lists, assert that in_multi_mtx is held. Acquire in_multi_mtx around iteration over the IPv4 multicast address lists, such as in ip_input() and ip_output(). Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses, as well as over the manipulation of ifnet multicast address lists in order to keep the two layers in sync. Lock down accesses to IPv4 multicast addresses in IGMP, or assert the lock when performing IGMP join/leave events. Eliminate spl's associated with IPv4 multicast addresses, portions of IGMP that weren't previously expunged by IGMP locking. Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded lock order in WITNESS, in that order. Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca> MFC after: 10 days
2005-08-03 19:29:47 +00:00
IN_MULTI_LOCK();
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
IN_LOOKUP_MULTI(ip->ip_dst, ifp, inm);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (inm != NULL &&
(imo == NULL || imo->imo_multicast_loop)) {
Introduce in_multi_mtx, which will protect IPv4-layer multicast address lists, as well as accessor macros. For now, this is a recursive mutex due code sequences where IPv4 multicast calls into IGMP calls into ip_output(), which then tests for a multicast forwarding case. For support macros in in_var.h to check multicast address lists, assert that in_multi_mtx is held. Acquire in_multi_mtx around iteration over the IPv4 multicast address lists, such as in ip_input() and ip_output(). Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses, as well as over the manipulation of ifnet multicast address lists in order to keep the two layers in sync. Lock down accesses to IPv4 multicast addresses in IGMP, or assert the lock when performing IGMP join/leave events. Eliminate spl's associated with IPv4 multicast addresses, portions of IGMP that weren't previously expunged by IGMP locking. Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded lock order in WITNESS, in that order. Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca> MFC after: 10 days
2005-08-03 19:29:47 +00:00
IN_MULTI_UNLOCK();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If we belong to the destination multicast group
* on the outgoing interface, and the caller did not
* forbid loopback, loop back a copy.
*/
Pull up the IP header in ip_mloopback(). This makes sure that the operations on the header inside ip_mloopback() are performed on a private copy instead of a shared cluster. PR: kern/3410
1997-05-06 21:22:04 +00:00
ip_mloopback(ifp, m, dst, hlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
else {
Introduce in_multi_mtx, which will protect IPv4-layer multicast address lists, as well as accessor macros. For now, this is a recursive mutex due code sequences where IPv4 multicast calls into IGMP calls into ip_output(), which then tests for a multicast forwarding case. For support macros in in_var.h to check multicast address lists, assert that in_multi_mtx is held. Acquire in_multi_mtx around iteration over the IPv4 multicast address lists, such as in ip_input() and ip_output(). Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses, as well as over the manipulation of ifnet multicast address lists in order to keep the two layers in sync. Lock down accesses to IPv4 multicast addresses in IGMP, or assert the lock when performing IGMP join/leave events. Eliminate spl's associated with IPv4 multicast addresses, portions of IGMP that weren't previously expunged by IGMP locking. Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded lock order in WITNESS, in that order. Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca> MFC after: 10 days
2005-08-03 19:29:47 +00:00
IN_MULTI_UNLOCK();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If we are acting as a multicast router, perform
* multicast forwarding as if the packet had just
* arrived on the interface to which we are about
* to send. The multicast forwarding function
* recursively calls this function, using the
* IP_FORWARDING flag to prevent infinite recursion.
*
* Multicasts that are looped back by ip_mloopback(),
* above, will be forwarded by the ip_input() routine,
* if necessary.
*/
if (ip_mrouter && (flags & IP_FORWARDING) == 0) {
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
/*
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
* If rsvp daemon is not running, do not
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
* set ip_moptions. This ensures that the packet
* is multicast and not just sent down one link
* as prescribed by rsvpd.
*/
Fix test for determining when RSVP is inactive in a router. (In this case, multicast options are not passed to ip_mforward().) The previous version had a wrong test, thus causing RSVP mrouters to forward RSVP messages in violation of the spec.
1995-07-26 18:05:16 +00:00
if (!rsvp_on)
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
imo = NULL;
if (ip_mforward &&
ip_mforward(ip, ifp, m, imo) != 0) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m_freem(m);
goto done;
}
}
}
Shuffle some functions and variables around to make it possible for multicast routing to be implemented as an LKM. (There's still a bit of work to do in this area.)
1994-09-14 03:10:15 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Multicasts with a time-to-live of zero may be looped-
* back, above, but must not be transmitted on a network.
* Also, multicasts addressed to the loopback interface
* are not sent -- the above call to ip_mloopback() will
* loop back a copy if this host actually belongs to the
* destination group on the loopback interface.
*/
Cleanup loopback interface support. Reviewed by: wollman
1995-04-26 18:10:58 +00:00
if (ip->ip_ttl == 0 || ifp->if_flags & IFF_LOOPBACK) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m_freem(m);
goto done;
}
goto sendit;
}
#ifndef notdef
/*
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
* If the source address is not specified yet, use the address
revert comment from rev1.158 now that rev1.225 backed it out.. MFC after: 3 days
2004-09-06 15:48:38 +00:00
* of the outoing interface.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Support for IPFW based transparent forwarding. Any packet that can be matched by a ipfw rule can be redirected transparently to another port or machine. Redirection to another port mostly makes sense with tcp, where a session can be set up between a proxy and an unsuspecting client. Redirection to another machine requires that the other machine also be expecting to receive the forwarded packets, as their headers will not have been modified. /sbin/ipfw must be recompiled!!! Reviewed by: Peter Wemm <peter@freebsd.org> Submitted by: Chrisy Luke <chrisy@flix.net>
1998-07-06 03:20:19 +00:00
if (ip->ip_src.s_addr == INADDR_ANY) {
Avoid a NULL pointer derefence introduced in rev. 1.129. Problem noticed by: bde, gcc(1) Panic caught by: mjacob Patch tested by: mjacob
2001-07-23 16:50:01 +00:00
/* Interface may have no addresses. */
if (ia != NULL) {
ip->ip_src = IA_SIN(ia)->sin_addr;
}
Support for IPFW based transparent forwarding. Any packet that can be matched by a ipfw rule can be redirected transparently to another port or machine. Redirection to another port mostly makes sense with tcp, where a session can be set up between a proxy and an unsuspecting client. Redirection to another machine requires that the other machine also be expecting to receive the forwarded packets, as their headers will not have been modified. /sbin/ipfw must be recompiled!!! Reviewed by: Peter Wemm <peter@freebsd.org> Submitted by: Chrisy Luke <chrisy@flix.net>
1998-07-06 03:20:19 +00:00
}
#endif /* notdef */
fixed bug where large amounts of unidirectional UDP traffic would fill the interface output queue and further udp packets would be fragmented and only partially sent - keeping the output queue full and jamming the network, but not actually getting any real work done (because you can't send just 'part' of a udp packet - if you fragment it, you must send the whole thing). The fix involves adding a check to make sure that the output queue has sufficient space for all of the fragments.
1994-08-01 12:01:45 +00:00
/*
Allow early drop for non-ALTQ enabled queues in an ALTQ-enabled kernel. Previously the early drop was disabled unconditionally for ALTQ-enabled kernels. This should give some benefit for the normal gateway + LAN-server case with a busy LAN leg and an ALTQ managed uplink. Reviewed and style help from: cperciva, pjd
2004-08-22 16:42:28 +00:00
* Verify that we have any chance at all of being able to queue the
* packet or packet fragments, unless ALTQ is enabled on the given
* interface in which case packetdrop should be done by queueing.
fixed bug where large amounts of unidirectional UDP traffic would fill the interface output queue and further udp packets would be fragmented and only partially sent - keeping the output queue full and jamming the network, but not actually getting any real work done (because you can't send just 'part' of a udp packet - if you fragment it, you must send the whole thing). The fix involves adding a check to make sure that the output queue has sufficient space for all of the fragments.
1994-08-01 12:01:45 +00:00
*/
Allow early drop for non-ALTQ enabled queues in an ALTQ-enabled kernel. Previously the early drop was disabled unconditionally for ALTQ-enabled kernels. This should give some benefit for the normal gateway + LAN-server case with a busy LAN leg and an ALTQ managed uplink. Reviewed and style help from: cperciva, pjd
2004-08-22 16:42:28 +00:00
#ifdef ALTQ
if ((!ALTQ_IS_ENABLED(&ifp->if_snd)) &&
((ifp->if_snd.ifq_len + ip->ip_len / ifp->if_mtu + 1) >=
ifp->if_snd.ifq_maxlen))
#else
fixed bug where large amounts of unidirectional UDP traffic would fill the interface output queue and further udp packets would be fragmented and only partially sent - keeping the output queue full and jamming the network, but not actually getting any real work done (because you can't send just 'part' of a udp packet - if you fragment it, you must send the whole thing). The fix involves adding a check to make sure that the output queue has sufficient space for all of the fragments.
1994-08-01 12:01:45 +00:00
if ((ifp->if_snd.ifq_len + ip->ip_len / ifp->if_mtu + 1) >=
Allow early drop for non-ALTQ enabled queues in an ALTQ-enabled kernel. Previously the early drop was disabled unconditionally for ALTQ-enabled kernels. This should give some benefit for the normal gateway + LAN-server case with a busy LAN leg and an ALTQ managed uplink. Reviewed and style help from: cperciva, pjd
2004-08-22 16:42:28 +00:00
ifp->if_snd.ifq_maxlen)
#endif /* ALTQ */
{
error = ENOBUFS;
ipstat.ips_odropped++;
goto bad;
fixed bug where large amounts of unidirectional UDP traffic would fill the interface output queue and further udp packets would be fragmented and only partially sent - keeping the output queue full and jamming the network, but not actually getting any real work done (because you can't send just 'part' of a udp packet - if you fragment it, you must send the whole thing). The fix involves adding a check to make sure that the output queue has sufficient space for all of the fragments.
1994-08-01 12:01:45 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Look for broadcast address and
RFC1122 requires that addresses of the form { 127, <any> } MUST NOT appear outside a host. PR: 30792, 33996 Obtained from: ip_input.c MFC after: 1 week
2002-01-21 13:59:42 +00:00
* verify user is allowed to send
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* such a packet.
*/
Add three new route flags to help determine what sort of address the destination represents. For IP: - Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local (belongs to this host) and broadcast addresses, respectively. - For all routes, RTF_MULTICAST is set if the destination is multicast. The RTF_BROADCAST flag is used by ip_output() to eliminate a call to in_broadcast() in a common case; this gives about 1% in our packet-generation experiments. All three flags might be used (although they aren't now) to determine whether a packet can be forwarded; a given host route can represent a forwardable address if: (rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST)) == RTF_HOST Obviously, one still has to do all the work if a host route is not present, but this code allows one to cache the results of such a lookup if rtalloc1() is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
if (isbroadcast) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if ((ifp->if_flags & IFF_BROADCAST) == 0) {
error = EADDRNOTAVAIL;
goto bad;
}
if ((flags & IP_ALLOWBROADCAST) == 0) {
error = EACCES;
goto bad;
}
/* don't allow broadcast messages to be fragmented */
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if (ip->ip_len > ifp->if_mtu) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EMSGSIZE;
goto bad;
}
Add the IP_ONESBCAST option, to enable undirected IP broadcasts to be sent on specific interfaces. This is required by aodvd, and may in future help us in getting rid of the requirement for BPF from our import of isc-dhcp. Suggested by: fenestro Obtained from: BSD/OS Reviewed by: mini, sam Approved by: jake (mentor)
2003-08-20 14:46:40 +00:00
if (flags & IP_SENDONES)
ip->ip_dst.s_addr = INADDR_BROADCAST;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m->m_flags |= M_BCAST;
Add three new route flags to help determine what sort of address the destination represents. For IP: - Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local (belongs to this host) and broadcast addresses, respectively. - For all routes, RTF_MULTICAST is set if the destination is multicast. The RTF_BROADCAST flag is used by ip_output() to eliminate a call to in_broadcast() in a common case; this gives about 1% in our packet-generation experiments. All three flags might be used (although they aren't now) to determine whether a packet can be forwarded; a given host route can represent a forwardable address if: (rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST)) == RTF_HOST Obviously, one still has to do all the work if a host route is not present, but this code allows one to cache the results of such a lookup if rtalloc1() is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
} else {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m->m_flags &= ~M_BCAST;
Add three new route flags to help determine what sort of address the destination represents. For IP: - Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local (belongs to this host) and broadcast addresses, respectively. - For all routes, RTF_MULTICAST is set if the destination is multicast. The RTF_BROADCAST flag is used by ip_output() to eliminate a call to in_broadcast() in a common case; this gives about 1% in our packet-generation experiments. All three flags might be used (although they aren't now) to determine whether a packet can be forwarded; a given host route can represent a forwardable address if: (rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST)) == RTF_HOST Obviously, one still has to do all the work if a host route is not present, but this code allows one to cache the results of such a lookup if rtalloc1() is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
change IP Filter hooks to match new 3.1.8 patches for FreeBSD
1997-02-19 14:02:27 +00:00
sendit:
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef IPSEC
/* get SP for this packet */
pass pcb rather than so. it is expected that per socket policy works again.
2004-02-03 18:20:55 +00:00
if (inp == NULL)
- cleanup SP refcnt issue. - share policy-on-socket for listening socket. - don't copy policy-on-socket at all. secpolicy no longer contain spidx, which saves a lot of memory. - deep-copy pcb policy if it is an ipsec policy. assign ID field to all SPD entries. make it possible for racoon to grab SPD entry on pcb. - fixed the order of searching SA table for packets. - fixed to get a security association header. a mode is always needed to compare them. - fixed that the incorrect time was set to sadb_comb_{hard|soft}_usetime. - disallow port spec for tunnel mode policy (as we don't reassemble). - an user can define a policy-id. - clear enc/auth key before freeing. - fixed that the kernel crashed when key_spdacquire() was called because key_spdacquire() had been implemented imcopletely. - preparation for 64bit sequence number. - maintain ordered list of SA, based on SA id. - cleanup secasvar management; refcnt is key.c responsibility; alloc/free is keydb.c responsibility. - cleanup, avoid double-loop. - use hash for spi-based lookup. - mark persistent SP "persistent". XXX in theory refcnt should do the right thing, however, we have "spdflush" which would touch all SPs. another solution would be to de-register persistent SPs from sptree. - u_short -> u_int16_t - reduce kernel stack usage by auto variable secasindex. - clarify function name confusion. ipsec_*_policy -> ipsec_*_pcbpolicy. - avoid variable name confusion. (struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct secpolicy *) - count number of ipsec encapsulations on ipsec4_output, so that we can tell ip_output() how to handle the packet further. - When the value of the ul_proto is ICMP or ICMPV6, the port field in "src" of the spidx specifies ICMP type, and the port field in "dst" of the spidx specifies ICMP code. - avoid from applying IPsec transport mode to the packets when the kernel forwards the packets. Tested by: nork Obtained from: KAME
2003-11-04 16:02:05 +00:00
sp = ipsec4_getpolicybyaddr(m, IPSEC_DIR_OUTBOUND,
flags, &error);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
else
pass pcb rather than so. it is expected that per socket policy works again.
2004-02-03 18:20:55 +00:00
sp = ipsec4_getpolicybypcb(m, IPSEC_DIR_OUTBOUND, inp, &error);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
if (sp == NULL) {
ipsecstat.out_inval++;
goto bad;
}
error = 0;
/* check policy */
switch (sp->policy) {
case IPSEC_POLICY_DISCARD:
/*
* This packet is just discarded.
*/
ipsecstat.out_polvio++;
goto bad;
case IPSEC_POLICY_BYPASS:
case IPSEC_POLICY_NONE:
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
case IPSEC_POLICY_TCP:
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/* no need to do IPsec. */
goto skip_ipsec;
case IPSEC_POLICY_IPSEC:
if (sp->req == NULL) {
/* acquire a policy */
error = key_spdacquire(sp);
goto bad;
}
break;
case IPSEC_POLICY_ENTRUST:
default:
printf("ip_output: Invalid policy found. %d\n", sp->policy);
}
{
struct ipsec_output_state state;
bzero(&state, sizeof(state));
state.m = m;
if (flags & IP_ROUTETOIF) {
state.ro = &iproute;
bzero(&iproute, sizeof(iproute));
} else
state.ro = ro;
state.dst = (struct sockaddr *)dst;
ip->ip_sum = 0;
/*
* XXX
* delayed checksums are not currently compatible with IPsec
*/
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
in_delayed_cksum(m);
m->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
}
o Move NTOHL() and associated macros into <sys/param.h>. These are deprecated in favor of the POSIX-defined lowercase variants. o Change all occurrences of NTOHL() and associated marcros in the source tree to use the lowercase function variants. o Add missing license bits to sparc64's <machine/endian.h>. Approved by: jake o Clean up <machine/endian.h> files. o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>. o Remove prototypes for non-existent bswapXX() functions. o Include <machine/endian.h> in <arpa/inet.h> to define the POSIX-required ntohl() family of functions. o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>, and <sys/param.h>. o Prepend underscores to the ntohl() family to help deal with complexities associated with having MD (asm and inline) versions, and having to prevent exposure of these functions in other headers that happen to make use of endian-specific defines. o Create weak aliases to the canonical function name to help deal with third-party software forgetting to include an appropriate header. o Remove some now unneeded pollution from <sys/types.h>. o Add missing <arpa/inet.h> includes in userland. Tested on: alpha, i386 Reviewed by: bde, jake, tmm
2002-02-18 20:35:27 +00:00
ip->ip_len = htons(ip->ip_len);
ip->ip_off = htons(ip->ip_off);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
error = ipsec4_output(&state, sp, flags);
m = state.m;
if (flags & IP_ROUTETOIF) {
/*
* if we have tunnel mode SA, we may need to ignore
* IP_ROUTETOIF.
*/
if (state.ro != &iproute || state.ro->ro_rt != NULL) {
flags &= ~IP_ROUTETOIF;
ro = state.ro;
}
} else
ro = state.ro;
dst = (struct sockaddr_in *)state.dst;
if (error) {
/* mbuf is already reclaimed in ipsec4_output. */
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
m = NULL;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
switch (error) {
case EHOSTUNREACH:
case ENETUNREACH:
case EMSGSIZE:
case ENOBUFS:
case ENOMEM:
break;
default:
printf("ip4_output (ipsec): error code %d\n", error);
/*fall through*/
case ENOENT:
/* don't show these error codes to the user */
error = 0;
break;
}
goto bad;
}
/* be sure to update variables that are affected by ipsec4_output() */
ip = mtod(m, struct ip *);
hlen = ip->ip_hl << 2;
if (ro->ro_rt == NULL) {
if ((flags & IP_ROUTETOIF) == 0) {
printf("ip_output: "
"can't update route after IPsec processing\n");
error = EHOSTUNREACH; /*XXX*/
goto bad;
}
} else {
don't update outgoing ifp, if ipsec tunnel mode encapsulation was not made. Obtained from: KAME
2004-02-16 17:05:06 +00:00
if (state.encap) {
ia = ifatoia(ro->ro_rt->rt_ifa);
ifp = ro->ro_rt->rt_ifp;
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
}
don't update outgoing ifp, if ipsec tunnel mode encapsulation was not made. Obtained from: KAME
2004-02-16 17:05:06 +00:00
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/* make it flipped, again. */
o Move NTOHL() and associated macros into <sys/param.h>. These are deprecated in favor of the POSIX-defined lowercase variants. o Change all occurrences of NTOHL() and associated marcros in the source tree to use the lowercase function variants. o Add missing license bits to sparc64's <machine/endian.h>. Approved by: jake o Clean up <machine/endian.h> files. o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>. o Remove prototypes for non-existent bswapXX() functions. o Include <machine/endian.h> in <arpa/inet.h> to define the POSIX-required ntohl() family of functions. o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>, and <sys/param.h>. o Prepend underscores to the ntohl() family to help deal with complexities associated with having MD (asm and inline) versions, and having to prevent exposure of these functions in other headers that happen to make use of endian-specific defines. o Create weak aliases to the canonical function name to help deal with third-party software forgetting to include an appropriate header. o Remove some now unneeded pollution from <sys/types.h>. o Add missing <arpa/inet.h> includes in userland. Tested on: alpha, i386 Reviewed by: bde, jake, tmm
2002-02-18 20:35:27 +00:00
ip->ip_len = ntohs(ip->ip_len);
ip->ip_off = ntohs(ip->ip_off);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
skip_ipsec:
#endif /*IPSEC*/
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
#ifdef FAST_IPSEC
/*
* Check the security policy (SP) for the packet and, if
* required, do IPsec-related processing. There are two
* cases here; the first time a packet is sent through
* it will be untagged and handled by ipsec4_checkpolicy.
* If the packet is resubmitted to ip_output (e.g. after
* AH, ESP, etc. processing), there will be a tag to bypass
* the lookup and related policy checking.
*/
mtag = m_tag_find(m, PACKET_TAG_IPSEC_PENDING_TDB, NULL);
s = splnet();
if (mtag != NULL) {
tdbi = (struct tdb_ident *)(mtag + 1);
sp = ipsec_getpolicy(tdbi, IPSEC_DIR_OUTBOUND);
if (sp == NULL)
error = -EINVAL; /* force silent drop */
m_tag_delete(m, mtag);
} else {
sp = ipsec4_checkpolicy(m, IPSEC_DIR_OUTBOUND, flags,
&error, inp);
}
/*
* There are four return cases:
* sp != NULL apply IPsec policy
* sp == NULL, error == 0 no IPsec handling needed
* sp == NULL, error == -EINVAL discard packet w/o error
* sp == NULL, error != 0 discard packet, report error
*/
if (sp != NULL) {
/* Loop detection, check if ipsec processing already done */
KASSERT(sp->req != NULL, ("ip_output: no ipsec request"));
for (mtag = m_tag_first(m); mtag != NULL;
mtag = m_tag_next(m, mtag)) {
if (mtag->m_tag_cookie != MTAG_ABI_COMPAT)
continue;
if (mtag->m_tag_id != PACKET_TAG_IPSEC_OUT_DONE &&
mtag->m_tag_id != PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED)
continue;
/*
* Check if policy has an SA associated with it.
* This can happen when an SP has yet to acquire
* an SA; e.g. on first reference. If it occurs,
* then we let ipsec4_process_packet do its thing.
*/
if (sp->req->sav == NULL)
break;
tdbi = (struct tdb_ident *)(mtag + 1);
if (tdbi->spi == sp->req->sav->spi &&
tdbi->proto == sp->req->sav->sah->saidx.proto &&
correct fast ipsec logic: compare destination ip address against the contents of the SA, not the SP Submitted by: "Doug Ambrisko" <ambrisko@verniernetworks.com>
2002-11-08 23:11:02 +00:00
bcmp(&tdbi->dst, &sp->req->sav->sah->saidx.dst,
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
sizeof (union sockaddr_union)) == 0) {
/*
* No IPsec processing is needed, free
* reference to SP.
*
* NB: null pointer to avoid free at
* done: below.
*/
KEY_FREESP(&sp), sp = NULL;
splx(s);
goto spd_done;
}
}
/*
* Do delayed checksums now because we send before
* this is done in the normal processing path.
*/
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
in_delayed_cksum(m);
m->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
}
ip->ip_len = htons(ip->ip_len);
ip->ip_off = htons(ip->ip_off);
/* NB: callee frees mbuf */
error = ipsec4_process_packet(m, sp->req, flags, 0);
FAST_IPSEC bandaid: act like KAME and ignore ENOENT error codes from ipsec4_process_packet; they happen when a packet is dropped because an SA acquire is initiated Submitted by: Doug Ambrisko <ambrisko@verniernetworks.com>
2003-01-30 05:45:45 +00:00
/*
* Preserve KAME behaviour: ENOENT can be returned
* when an SA acquire is in progress. Don't propagate
* this to user-level; it confuses applications.
*
* XXX this will go away when the SADB is redone.
*/
if (error == ENOENT)
error = 0;
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
splx(s);
goto done;
} else {
splx(s);
if (error != 0) {
/*
* Hack: -EINVAL is used to signal that a packet
* should be silently discarded. This is typically
* because we asked key management for an SA and
* it was delayed (e.g. kicked up to IKE).
*/
if (error == -EINVAL)
error = 0;
goto bad;
} else {
/* No IPsec processing for this packet. */
}
#ifdef notyet
/*
* If deferred crypto processing is needed, check that
* the interface supports it.
*/
mtag = m_tag_find(m, PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED, NULL);
if (mtag != NULL && (ifp->if_capenable & IFCAP_IPSEC) == 0) {
/* notify IPsec to do its own crypto */
ipsp_skipcrypto_unmark((struct tdb_ident *)(mtag + 1));
error = EHOSTUNREACH;
goto bad;
}
#endif
}
spd_done:
#endif /* FAST_IPSEC */
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
Always compile PFIL_HOOKS into the kernel and remove the associated kernel compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and thus it becomes a standard part of the network stack. If no hooks are connected the entire packet filter hooks section and related activities are jumped over. This removes any performance impact if no hooks are active. Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
/* Jump over all PFIL processing if hooks are not active. */
if (inet_pfil_hook.ph_busy_count == -1)
goto passout;
/* Run through list of hooks for output packets. */
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
odst.s_addr = ip->ip_dst.s_addr;
Add an additional struct inpcb * argument to pfil(9) in order to enable passing along socket information. This is required to work around a LOR with the socket code which results in an easy reproducible hard lockup with debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do so later. The missing piece is to turn the filter locking into a leaf lock and will follow in a seperate (later) commit. This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in forseeable future. Suggested by: rwatson A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;) Reviewed by: rwatson, csjp Tested by: -pf, -ipfw, LINT, csjp and myself MFC after: 3 days LOR IDs: 14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
error = pfil_run_hooks(&inet_pfil_hook, &m, ifp, PFIL_OUT, inp);
o update PFIL_HOOKS support to current API used by netbsd o revamp IPv4+IPv6+bridge usage to match API changes o remove pfil_head instances from protosw entries (no longer used) o add locking o bump FreeBSD version for 3rd party modules Heavy lifting by: "Max Laier" <max@love2party.net> Supported by: FreeBSD Foundation Obtained from: NetBSD (bits of pfil.h and pfil.c)
2003-09-23 17:54:04 +00:00
if (error != 0 || m == NULL)
goto done;
Add hooks for an IP NAT module, much like the firewall stuff... Move the sockopt definitions for the firewall code from ip_fw.h to in.h where it belongs.
1996-08-21 21:37:07 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
ip = mtod(m, struct ip *);
Last bits (i think) of dummynet for -current.
1998-12-14 18:09:13 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
/* See if destination IP address was changed by packet filter. */
if (odst.s_addr != ip->ip_dst.s_addr) {
m->m_flags |= M_SKIP_FIREWALL;
Make comments more clear for the packet changed cases after pfil hooks.
2004-09-13 17:09:06 +00:00
/* If destination is now ourself drop to ip_input(). */
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (in_localip(ip->ip_dst)) {
m->m_flags |= M_FASTFWD_OURS;
if (m->m_pkthdr.rcvif == NULL)
In the case the destination of a packet was changed by the packet filter to point to a local IP address; and the packet was sourced from this host we fill in the m_pkthdr.rcvif with a pointer to the loopback interface. Before the function ifunit("lo0") was used to obtain the ifp. However this is sub-optimal from a performance point of view and might be dangerous if the loopback interface has been renamed. Use the global variable 'loif' instead which always points to the loopback interface. Submitted by: brooks
2004-08-27 15:39:34 +00:00
m->m_pkthdr.rcvif = loif;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
m->m_pkthdr.csum_flags |=
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
m->m_pkthdr.csum_data = 0xffff;
}
m->m_pkthdr.csum_flags |=
CSUM_IP_CHECKED | CSUM_IP_VALID;
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
error = netisr_queue(NETISR_IP, m);
whitespace and style fixes recovered from -stable.
2001-12-14 19:34:11 +00:00
goto done;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
} else
Make comments more clear for the packet changed cases after pfil hooks.
2004-09-13 17:09:06 +00:00
goto again; /* Redo the routing table lookup. */
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
}
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
#ifdef IPFIREWALL_FORWARD
/* See if local, if yes, send it to netisr with IP_FASTFWD_OURS. */
if (m->m_flags & M_FASTFWD_OURS) {
if (m->m_pkthdr.rcvif == NULL)
In the case the destination of a packet was changed by the packet filter to point to a local IP address; and the packet was sourced from this host we fill in the m_pkthdr.rcvif with a pointer to the loopback interface. Before the function ifunit("lo0") was used to obtain the ifp. However this is sub-optimal from a performance point of view and might be dangerous if the loopback interface has been renamed. Use the global variable 'loif' instead which always points to the loopback interface. Submitted by: brooks
2004-08-27 15:39:34 +00:00
m->m_pkthdr.rcvif = loif;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
m->m_pkthdr.csum_flags |=
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
m->m_pkthdr.csum_data = 0xffff;
Submitted by: Whistle Communications (archie Cobbs) these are quite extensive additions to the ipfw code. they include a change to the API because the old method was broken, but the user view is kept the same. The new code allows a particular match to skip forward to a particular line number, so that blocks of rules can be used without checking all the intervening rules. There are also many more ways of rejecting connections especially TCP related, and many many more ... see the man page for a complete description.
1997-06-02 05:02:37 +00:00
}
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
m->m_pkthdr.csum_flags |=
CSUM_IP_CHECKED | CSUM_IP_VALID;
Miscellaneous fixes/cleanups relating to ipfw and divert(4): - Implement 'ipfw tee' (finally) - Divert packets by calling new function divert_packet() directly instead of going through protosw[]. - Replace kludgey global variable 'ip_divert_port' with a function parameter to divert_packet() - Replace kludgey global variable 'frag_divert_port' with a function parameter to ip_reass() - style(9) fixes Reviewed by: julian, green
1999-12-06 00:43:07 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
error = netisr_queue(NETISR_IP, m);
goto done;
}
/* Or forward to some other address? */
fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL);
if (fwd_tag) {
Bring back the full packet destination manipulation for 'ipfw fwd' with the kernel compile time option: options IPFIREWALL_FORWARD_EXTENDED This option has to be specified in addition to IPFIRWALL_FORWARD. With this option even packets targeted for an IP address local to the host can be redirected. All restrictions to ensure proper behaviour for locally generated packets are turned off. Firewall rules have to be carefully crafted to make sure that things like PMTU discovery do not break. Document the two kernel options. PR: kern/71910 PR: kern/73129 MFC after: 1 week
2005-02-22 17:40:40 +00:00
#ifndef IPFIREWALL_FORWARD_EXTENDED
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (!in_localip(ip->ip_src) && !in_localaddr(ip->ip_dst)) {
Bring back the full packet destination manipulation for 'ipfw fwd' with the kernel compile time option: options IPFIREWALL_FORWARD_EXTENDED This option has to be specified in addition to IPFIRWALL_FORWARD. With this option even packets targeted for an IP address local to the host can be redirected. All restrictions to ensure proper behaviour for locally generated packets are turned off. Firewall rules have to be carefully crafted to make sure that things like PMTU discovery do not break. Document the two kernel options. PR: kern/71910 PR: kern/73129 MFC after: 1 week
2005-02-22 17:40:40 +00:00
#endif
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
dst = (struct sockaddr_in *)&ro->ro_dst;
bcopy((fwd_tag+1), dst, sizeof(struct sockaddr_in));
m->m_flags |= M_SKIP_FIREWALL;
m_tag_delete(m, fwd_tag);
goto again;
Bring back the full packet destination manipulation for 'ipfw fwd' with the kernel compile time option: options IPFIREWALL_FORWARD_EXTENDED This option has to be specified in addition to IPFIRWALL_FORWARD. With this option even packets targeted for an IP address local to the host can be redirected. All restrictions to ensure proper behaviour for locally generated packets are turned off. Firewall rules have to be carefully crafted to make sure that things like PMTU discovery do not break. Document the two kernel options. PR: kern/71910 PR: kern/73129 MFC after: 1 week
2005-02-22 17:40:40 +00:00
#ifndef IPFIREWALL_FORWARD_EXTENDED
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
} else {
m_tag_delete(m, fwd_tag);
/* Continue. */
Adding changes to ipfw and the kernel to support ip packet diversion.. This stuff should not be too destructive if the IPDIVERT is not compiled in.. be aware that this changes the size of the ip_fw struct so ipfw needs to be recompiled to use it.. more changes coming to clean this up.
1996-07-10 19:44:30 +00:00
}
Last bits (i think) of dummynet for -current.
1998-12-14 18:09:13 +00:00
#endif
Bring back the full packet destination manipulation for 'ipfw fwd' with the kernel compile time option: options IPFIREWALL_FORWARD_EXTENDED This option has to be specified in addition to IPFIRWALL_FORWARD. With this option even packets targeted for an IP address local to the host can be redirected. All restrictions to ensure proper behaviour for locally generated packets are turned off. Firewall rules have to be carefully crafted to make sure that things like PMTU discovery do not break. Document the two kernel options. PR: kern/71910 PR: kern/73129 MFC after: 1 week
2005-02-22 17:40:40 +00:00
}
#endif /* IPFIREWALL_FORWARD */
Last bits (i think) of dummynet for -current.
1998-12-14 18:09:13 +00:00
Always compile PFIL_HOOKS into the kernel and remove the associated kernel compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and thus it becomes a standard part of the network stack. If no hooks are connected the entire packet filter hooks section and related activities are jumped over. This removes any performance impact if no hooks are active. Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
passout:
Moved the 127/8 check below so that IPF redirects have a chance of working. MFC after: 1 day
2002-02-15 12:19:03 +00:00
/* 127/8 must not appear on wire - RFC1122. */
if ((ntohl(ip->ip_dst.s_addr) >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET ||
(ntohl(ip->ip_src.s_addr) >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET) {
if ((ifp->if_flags & IFF_LOOPBACK) == 0) {
ipstat.ips_badaddr++;
error = EADDRNOTAVAIL;
goto bad;
}
}
RFC768 (UDP) requires that "if the computed checksum is zero, it is transmitted as all ones". This got broken after introduction of delayed checksums as follows. Some guys (including Jonathan) think that it is allowed to transmit all ones in place of a zero checksum for TCP the same way as for UDP. (The discussion still takes place on -net.) Thus, the 0 -> 0xffff checksum fixup was first moved from udp_output() (see udp_usrreq.c, 1.64 -> 1.65) to in_cksum_skip() (see sys/i386/i386/in_cksum.c, 1.17 -> 1.18, INVERT expression). Besides that I disagree that it is valid for TCP, there was no real problem until in_cksum.c,v 1.20, where the in_cksum() was made just a special version of in_cksum_skip(). The side effect was that now every incoming IP datagram failed to pass the checksum test (in_cksum() returned 0xffff when it should actually return zero). It was fixed next day in revision 1.21, by removing the INVERT expression. The latter also broke the 0 -> 0xffff fixup for UDP checksums. Before this change: : tcpdump: listening on lo0 : 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1) : 4500 001c 0001 0000 4011 7cce 7f00 0001 : 7f00 0001 80ed 80ee 0008 0000 After this change: : tcpdump: listening on lo0 : 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1) : 4500 001c 0001 0000 4011 7cce 7f00 0001 : 7f00 0001 80ed 80ee 0008 ffff
2001-03-13 17:07:06 +00:00
m->m_pkthdr.csum_flags |= CSUM_IP;
sw_csum = m->m_pkthdr.csum_flags & ~ifp->if_hwassist;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
if (sw_csum & CSUM_DELAY_DATA) {
in_delayed_cksum(m);
sw_csum &= ~CSUM_DELAY_DATA;
}
RFC768 (UDP) requires that "if the computed checksum is zero, it is transmitted as all ones". This got broken after introduction of delayed checksums as follows. Some guys (including Jonathan) think that it is allowed to transmit all ones in place of a zero checksum for TCP the same way as for UDP. (The discussion still takes place on -net.) Thus, the 0 -> 0xffff checksum fixup was first moved from udp_output() (see udp_usrreq.c, 1.64 -> 1.65) to in_cksum_skip() (see sys/i386/i386/in_cksum.c, 1.17 -> 1.18, INVERT expression). Besides that I disagree that it is valid for TCP, there was no real problem until in_cksum.c,v 1.20, where the in_cksum() was made just a special version of in_cksum_skip(). The side effect was that now every incoming IP datagram failed to pass the checksum test (in_cksum() returned 0xffff when it should actually return zero). It was fixed next day in revision 1.21, by removing the INVERT expression. The latter also broke the 0 -> 0xffff fixup for UDP checksums. Before this change: : tcpdump: listening on lo0 : 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1) : 4500 001c 0001 0000 4011 7cce 7f00 0001 : 7f00 0001 80ed 80ee 0008 0000 After this change: : tcpdump: listening on lo0 : 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1) : 4500 001c 0001 0000 4011 7cce 7f00 0001 : 7f00 0001 80ed 80ee 0008 ffff
2001-03-13 17:07:06 +00:00
m->m_pkthdr.csum_flags &= ifp->if_hwassist;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
* If small enough for interface, or the interface will take
* care of the fragmentation for us, can just send directly.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Do not fragment a packet with hardware assistance if it has the DF bit set. Reviewed by: sam (mentor)
2003-11-12 23:35:40 +00:00
if (ip->ip_len <= ifp->if_mtu || (ifp->if_hwassist & CSUM_FRAGMENT &&
((ip->ip_off & IP_DF) == 0))) {
o Move NTOHL() and associated macros into <sys/param.h>. These are deprecated in favor of the POSIX-defined lowercase variants. o Change all occurrences of NTOHL() and associated marcros in the source tree to use the lowercase function variants. o Add missing license bits to sparc64's <machine/endian.h>. Approved by: jake o Clean up <machine/endian.h> files. o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>. o Remove prototypes for non-existent bswapXX() functions. o Include <machine/endian.h> in <arpa/inet.h> to define the POSIX-required ntohl() family of functions. o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>, and <sys/param.h>. o Prepend underscores to the ntohl() family to help deal with complexities associated with having MD (asm and inline) versions, and having to prevent exposure of these functions in other headers that happen to make use of endian-specific defines. o Create weak aliases to the canonical function name to help deal with third-party software forgetting to include an appropriate header. o Remove some now unneeded pollution from <sys/types.h>. o Add missing <arpa/inet.h> includes in userland. Tested on: alpha, i386 Reviewed by: bde, jake, tmm
2002-02-18 20:35:27 +00:00
ip->ip_len = htons(ip->ip_len);
ip->ip_off = htons(ip->ip_off);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->ip_sum = 0;
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
if (sw_csum & CSUM_DELAY_IP)
ip->ip_sum = in_cksum(m, hlen);
Augment the 'ifaddr' structure with a 'struct if_data' to keep statistics on a per network address basis. Teach the IPv4 and IPv6 input/output routines to log packets/bytes against the network address connected to the flow. Teach netstat to display the per-address stats for IP protocols when 'netstat -i' is evoked, instead of displaying the per-interface stats.
2000-10-19 23:15:54 +00:00
/* Record statistics for this interface address. */
Avoid a NULL pointer derefence introduced in rev. 1.129. Problem noticed by: bde, gcc(1) Panic caught by: mjacob Patch tested by: mjacob
2001-07-23 16:50:01 +00:00
if (!(flags & IP_FORWARDING) && ia) {
Augment the 'ifaddr' structure with a 'struct if_data' to keep statistics on a per network address basis. Teach the IPv4 and IPv6 input/output routines to log packets/bytes against the network address connected to the flow. Teach netstat to display the per-address stats for IP protocols when 'netstat -i' is evoked, instead of displaying the per-interface stats.
2000-10-19 23:15:54 +00:00
ia->ia_ifa.if_opackets++;
ia->ia_ifa.if_obytes += m->m_pkthdr.len;
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
#ifdef IPSEC
/* clean ipsec history once it goes out of the node */
ipsec_delaux(m);
#endif
Rename MBUF_FRAG_TEST to MBUF_STRESS_TEST as it will be extended to include more than just frag tests.
2003-04-12 06:11:46 +00:00
#ifdef MBUF_STRESS_TEST
Implement MBUF_STRESS_TEST mark II. Changes from the original implementation: - Fragmentation is handled by the function m_fragment, which can be called from whereever fragmentation is needed. Note that this function is wrapped in #ifdef MBUF_STRESS_TEST to discourage non-testing use. - m_fragment works slightly differently from the old fragmentation code in that it allocates a seperate mbuf cluster for each fragment. This defeats dma_map_load_mbuf/buffer's feature of coalescing adjacent fragments. While that is a nice feature in practice, it nerfed the usefulness of mbuf_stress_test. - Add two modes of random fragmentation. Chains with fragments all of the same random length and chains with fragments that are each uniquely random in length may now be requested.
2003-09-01 05:55:37 +00:00
if (mbuf_frag_size && m->m_pkthdr.len > mbuf_frag_size)
m = m_fragment(m, M_DONTWAIT, mbuf_frag_size);
Add the MBUF_FRAG_TEST option. When compiled in, this option allows you to tell ip_output to fragment all outgoing packets into mbuf fragments of size net.inet.ip.mbuf_frag_size bytes. This is an excellent way to test if network drivers can properly handle long mbuf chains being passed to them. net.inet.ip.mbuf_frag_size defaults to 0 (no fragmentation) so that you can at least boot before your network driver dies. :)
2003-03-25 05:45:05 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = (*ifp->if_output)(ifp, m,
(struct sockaddr *)dst, ro->ro_rt);
goto done;
}
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ip->ip_off & IP_DF) {
error = EMSGSIZE;
The ability to administratively change the MTU of an interface presents a few new wrinkles for MTU discovery which tcp_output() had better be prepared to handle. ip_output() is also modified to do something helpful in this case, since it has already calculated the information we need.
1995-10-16 18:21:26 +00:00
/*
* This case can happen if the user changed the MTU
* of an interface after enabling IP on it. Because
* most netifs don't keep track of routes pointing to
* them, there is no way for one to update all its
* routes when the MTU is changed.
*/
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if ((ro->ro_rt->rt_flags & (RTF_UP | RTF_HOST)) &&
(ro->ro_rt->rt_rmx.rmx_mtu > ifp->if_mtu)) {
The ability to administratively change the MTU of an interface presents a few new wrinkles for MTU discovery which tcp_output() had better be prepared to handle. ip_output() is also modified to do something helpful in this case, since it has already calculated the information we need.
1995-10-16 18:21:26 +00:00
ro->ro_rt->rt_rmx.rmx_mtu = ifp->if_mtu;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ipstat.ips_cantfrag++;
goto bad;
}
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
/*
* Too large for interface; fragment if possible. If successful,
* on return, m will point to a list of packets to be sent.
*/
error = ip_fragment(ip, &m, ifp->if_mtu, ifp->if_hwassist, sw_csum);
if (error)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
for (; m; m = m0) {
m0 = m->m_nextpkt;
m->m_nextpkt = 0;
#ifdef IPSEC
/* clean ipsec history once it goes out of the node */
ipsec_delaux(m);
#endif
if (error == 0) {
/* Record statistics for this interface address. */
if (ia != NULL) {
ia->ia_ifa.if_opackets++;
ia->ia_ifa.if_obytes += m->m_pkthdr.len;
}
error = (*ifp->if_output)(ifp, m,
(struct sockaddr *)dst, ro->ro_rt);
} else
m_freem(m);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if (error == 0)
ipstat.ips_fragmented++;
done:
if (ro == &iproute && ro->ro_rt) {
RTFREE(ro->ro_rt);
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
}
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
#ifdef IPSEC
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if (sp != NULL) {
KEYDEBUG(KEYDEBUG_IPSEC_STAMP,
printf("DP ip_output call free SP:%p\n", sp));
key_freesp(sp);
}
#endif
#ifdef FAST_IPSEC
if (sp != NULL)
KEY_FREESP(&sp);
#endif
return (error);
bad:
m_freem(m);
goto done;
}
/*
* Create a chain of fragments which fit the given mtu. m_frag points to the
* mbuf to be fragmented; on return it points to the chain with the fragments.
* Return 0 if no error. If error, m_frag may contain a partially built
* chain of fragments that should be freed by the caller.
*
* if_hwassist_flags is the hw offload capabilities (see if_data.ifi_hwassist)
* sw_csum contains the delayed checksums flags (e.g., CSUM_DELAY_IP).
*/
int
ip_fragment(struct ip *ip, struct mbuf **m_frag, int mtu,
u_long if_hwassist_flags, int sw_csum)
{
int error = 0;
int hlen = ip->ip_hl << 2;
int len = (mtu - hlen) & ~7; /* size of payload in each fragment */
int off;
struct mbuf *m0 = *m_frag; /* the original packet */
int firstlen;
struct mbuf **mnext;
int nfrags;
if (ip->ip_off & IP_DF) { /* Fragmentation not allowed */
ipstat.ips_cantfrag++;
return EMSGSIZE;
}
/*
* Must be able to put at least 8 bytes per fragment.
*/
if (len < 8)
return EMSGSIZE;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
/*
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
* If the interface will not calculate checksums on
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
* fragmented packets, then do it here.
*/
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if (m0->m_pkthdr.csum_flags & CSUM_DELAY_DATA &&
(if_hwassist_flags & CSUM_IP_FRAGS) == 0) {
in_delayed_cksum(m0);
m0->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
}
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
if (len > PAGE_SIZE) {
/*
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
* Fragment large datagrams such that each segment
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
* contains a multiple of PAGE_SIZE amount of data,
* plus headers. This enables a receiver to perform
* page-flipping zero-copy optimizations.
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
*
* XXX When does this help given that sender and receiver
* could have different page sizes, and also mtu could
* be less than the receiver's page size ?
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
*/
int newlen;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
struct mbuf *m;
for (m = m0, off = 0; m && (off+m->m_len) <= mtu; m = m->m_next)
off += m->m_len;
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
/*
* firstlen (off - hlen) must be aligned on an
* 8-byte boundary
*/
if (off < hlen)
goto smart_frag_failure;
off = ((off - hlen) & ~7) + hlen;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
newlen = (~PAGE_MASK) & mtu;
if ((newlen + sizeof (struct ip)) > mtu) {
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
/* we failed, go back the default */
smart_frag_failure:
newlen = len;
off = hlen + len;
}
len = newlen;
} else {
off = hlen + len;
}
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
firstlen = off - hlen;
mnext = &m0->m_nextpkt; /* pointer to next packet */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Loop through length of segment after first fragment,
* make new header and copy data of each part and link onto chain.
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
* Here, m0 is the original packet, m is the fragment being created.
* The fragments are linked off the m_nextpkt of the original
* packet, which after processing serves as the first fragment.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
for (nfrags = 1; off < ip->ip_len; off += len, nfrags++) {
struct ip *mhip; /* ip header on the fragment */
struct mbuf *m;
int mhlen = sizeof (struct ip);
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
MGETHDR(m, M_DONTWAIT, MT_HEADER);
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (m == NULL) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = ENOBUFS;
ipstat.ips_odropped++;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
goto done;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
m->m_flags |= (m0->m_flags & M_MCAST) | M_FRAG;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
/*
* In the first mbuf, leave room for the link header, then
* copy the original IP header including options. The payload
* goes into an additional mbuf chain returned by m_copy().
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m->m_data += max_linkhdr;
mhip = mtod(m, struct ip *);
*mhip = *ip;
if (hlen > sizeof (struct ip)) {
mhlen = ip_optcopy(ip, mhip) + sizeof (struct ip);
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
mhip->ip_v = IPVERSION;
mhip->ip_hl = mhlen >> 2;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
m->m_len = mhlen;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
/* XXX do we need to add ip->ip_off below ? */
Save a few CPU cycles in IP fragmentation code.
2000-10-20 14:10:37 +00:00
mhip->ip_off = ((off - hlen) >> 3) + ip->ip_off;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if (off + len >= ip->ip_len) { /* last fragment */
len = ip->ip_len - off;
m->m_flags |= M_LASTFRAG;
} else
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
mhip->ip_off |= IP_MF;
mhip->ip_len = htons((u_short)(len + mhlen));
m->m_next = m_copy(m0, off, len);
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (m->m_next == NULL) { /* copy failed */
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
m_free(m);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = ENOBUFS; /* ??? */
ipstat.ips_odropped++;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
goto done;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
m->m_pkthdr.len = mhlen + len;
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
m->m_pkthdr.rcvif = NULL;
Introduce support for Mandatory Access Control and extensible kernel access control. When fragmenting an IP datagram, invoke an appropriate MAC entry point so that MAC labels may be copied (...) to the individual IP fragment mbufs by MAC policies. When IP options are inserted into an IP datagram when leaving a host, preserve the label if we need to reallocate the mbuf for alignment or size reasons. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-31 17:21:01 +00:00
#ifdef MAC
mac_create_fragment(m0, m);
#endif
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
m->m_pkthdr.csum_flags = m0->m_pkthdr.csum_flags;
o Move NTOHL() and associated macros into <sys/param.h>. These are deprecated in favor of the POSIX-defined lowercase variants. o Change all occurrences of NTOHL() and associated marcros in the source tree to use the lowercase function variants. o Add missing license bits to sparc64's <machine/endian.h>. Approved by: jake o Clean up <machine/endian.h> files. o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>. o Remove prototypes for non-existent bswapXX() functions. o Include <machine/endian.h> in <arpa/inet.h> to define the POSIX-required ntohl() family of functions. o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>, and <sys/param.h>. o Prepend underscores to the ntohl() family to help deal with complexities associated with having MD (asm and inline) versions, and having to prevent exposure of these functions in other headers that happen to make use of endian-specific defines. o Create weak aliases to the canonical function name to help deal with third-party software forgetting to include an appropriate header. o Remove some now unneeded pollution from <sys/types.h>. o Add missing <arpa/inet.h> includes in userland. Tested on: alpha, i386 Reviewed by: bde, jake, tmm
2002-02-18 20:35:27 +00:00
mhip->ip_off = htons(mhip->ip_off);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
mhip->ip_sum = 0;
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
if (sw_csum & CSUM_DELAY_IP)
mhip->ip_sum = in_cksum(m, mhlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*mnext = m;
mnext = &m->m_nextpkt;
}
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
ipstat.ips_ofragments += nfrags;
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
/* set first marker for fragment chain */
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
m0->m_flags |= M_FIRSTFRAG | M_FRAG;
m0->m_pkthdr.csum_data = nfrags;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
* Update first fragment by trimming what's been copied out
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
* and updating header.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
m_adj(m0, hlen + firstlen - ip->ip_len);
m0->m_pkthdr.len = hlen + firstlen;
ip->ip_len = htons((u_short)m0->m_pkthdr.len);
Fixed broken ICMP error generation, unified conversion of IP header fields between host and network byte order. The details: o icmp_error() now does not add IP header length. This fixes the problem when icmp_error() is called from ip_forward(). In this case the ip_len of the original IP datagram returned with ICMP error was wrong. o icmp_error() expects all three fields, ip_len, ip_id and ip_off in host byte order, so DTRT and convert these fields back to network byte order before sending a message. This fixes the problem described in PR 16240 and PR 20877 (ip_id field was returned in host byte order). o ip_ttl decrement operation in ip_forward() was moved down to make sure that it does not corrupt the copy of original IP datagram passed later to icmp_error(). o A copy of original IP datagram in ip_forward() was made a read-write, independent copy. This fixes the problem I first reported to Garrett Wollman and Bill Fenner and later put in audit trail of PR 16240: ip_output() (not always) converts fields of original datagram to network byte order, but because copy (mcopy) and its original (m) most likely share the same mbuf cluster, ip_output()'s manipulations on original also corrupted the copy. o ip_output() now expects all three fields, ip_len, ip_off and (what is significant) ip_id in host byte order. It was a headache for years that ip_id was handled differently. The only compatibility issue here is the raw IP socket interface with IP_HDRINCL socket option set and a non-zero ip_id field, but ip.4 manual page was unclear on whether in this case ip_id field should be in host or network byte order.
2000-09-01 12:33:03 +00:00
ip->ip_off |= IP_MF;
o Move NTOHL() and associated macros into <sys/param.h>. These are deprecated in favor of the POSIX-defined lowercase variants. o Change all occurrences of NTOHL() and associated marcros in the source tree to use the lowercase function variants. o Add missing license bits to sparc64's <machine/endian.h>. Approved by: jake o Clean up <machine/endian.h> files. o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>. o Remove prototypes for non-existent bswapXX() functions. o Include <machine/endian.h> in <arpa/inet.h> to define the POSIX-required ntohl() family of functions. o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>, and <sys/param.h>. o Prepend underscores to the ntohl() family to help deal with complexities associated with having MD (asm and inline) versions, and having to prevent exposure of these functions in other headers that happen to make use of endian-specific defines. o Create weak aliases to the canonical function name to help deal with third-party software forgetting to include an appropriate header. o Remove some now unneeded pollution from <sys/types.h>. o Add missing <arpa/inet.h> includes in userland. Tested on: alpha, i386 Reviewed by: bde, jake, tmm
2002-02-18 20:35:27 +00:00
ip->ip_off = htons(ip->ip_off);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->ip_sum = 0;
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
if (sw_csum & CSUM_DELAY_IP)
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
ip->ip_sum = in_cksum(m0, hlen);
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
done:
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
*m_frag = m0;
return error;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Compute the checksum before handing the packet off to IPFilter. Tested by: Cy Schubert <Cy.Schubert@uumail.gov.bc.ca>
2000-05-21 21:26:06 +00:00
void
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
in_delayed_cksum(struct mbuf *m)
{
struct ip *ip;
u_short csum, offset;
ip = mtod(m, struct ip *);
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
offset = ip->ip_hl << 2 ;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
csum = in_cksum_skip(m, ip->ip_len, offset);
RFC768 (UDP) requires that "if the computed checksum is zero, it is transmitted as all ones". This got broken after introduction of delayed checksums as follows. Some guys (including Jonathan) think that it is allowed to transmit all ones in place of a zero checksum for TCP the same way as for UDP. (The discussion still takes place on -net.) Thus, the 0 -> 0xffff checksum fixup was first moved from udp_output() (see udp_usrreq.c, 1.64 -> 1.65) to in_cksum_skip() (see sys/i386/i386/in_cksum.c, 1.17 -> 1.18, INVERT expression). Besides that I disagree that it is valid for TCP, there was no real problem until in_cksum.c,v 1.20, where the in_cksum() was made just a special version of in_cksum_skip(). The side effect was that now every incoming IP datagram failed to pass the checksum test (in_cksum() returned 0xffff when it should actually return zero). It was fixed next day in revision 1.21, by removing the INVERT expression. The latter also broke the 0 -> 0xffff fixup for UDP checksums. Before this change: : tcpdump: listening on lo0 : 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1) : 4500 001c 0001 0000 4011 7cce 7f00 0001 : 7f00 0001 80ed 80ee 0008 0000 After this change: : tcpdump: listening on lo0 : 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1) : 4500 001c 0001 0000 4011 7cce 7f00 0001 : 7f00 0001 80ed 80ee 0008 ffff
2001-03-13 17:07:06 +00:00
if (m->m_pkthdr.csum_flags & CSUM_UDP && csum == 0)
csum = 0xffff;
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
offset += m->m_pkthdr.csum_data; /* checksum offset */
if (offset + sizeof(u_short) > m->m_len) {
printf("delayed m_pullup, m->len: %d off: %d p: %d\n",
m->m_len, offset, ip->ip_p);
/*
* XXX
* this shouldn't happen, but if it does, the
* correct behavior may be to insert the checksum
* in the existing chain instead of rearranging it.
*/
m = m_pullup(m, offset + sizeof(u_short));
}
*(u_short *)(m->m_data + offset) = csum;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Insert IP options into preformed packet.
* Adjust IP destination as required for IP source routing,
* as indicated by a non-zero in_addr at the start of the options.
Fix ip option processing for raw IP sockets. This whole thing is a compromise between ignoring options specified in the setsockopt call if IP_HDRINCL is set (the UCB choice when VJ's code was brought in) vs allowing them (what everyone else did, and what is assumed by programs everywhere...sigh). Also perform some checking of the passed down packet to avoid running off the end of a mbuf chain. Reviewed by: fenner
1996-03-13 08:02:45 +00:00
*
* XXX This routine assumes that the packet has no options in place.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
static struct mbuf *
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
ip_insertoptions(m, opt, phlen)
register struct mbuf *m;
struct mbuf *opt;
int *phlen;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
register struct ipoption *p = mtod(opt, struct ipoption *);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct mbuf *n;
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
register struct ip *ip = mtod(m, struct ip *);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
unsigned optlen;
optlen = opt->m_len - sizeof(p->ipopt_dst);
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
if (optlen + ip->ip_len > IP_MAXPACKET) {
Slightly rearrange a code in rev. 1.164: o Move len initialization closer to place of its first usage. o Compare len with 0 to improve readability. o Explicitly zero out phlen in ip_insertoptions() in failure case. Suggested by: jhb Reviewed by: jhb MFC after: 2 weeks
2002-09-23 08:56:24 +00:00
*phlen = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (m); /* XXX should fail */
Slightly rearrange a code in rev. 1.164: o Move len initialization closer to place of its first usage. o Compare len with 0 to improve readability. o Explicitly zero out phlen in ip_insertoptions() in failure case. Suggested by: jhb Reviewed by: jhb MFC after: 2 weeks
2002-09-23 08:56:24 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (p->ipopt_dst.s_addr)
ip->ip_dst = p->ipopt_dst;
if (m->m_flags & M_EXT || m->m_data - optlen < m->m_pktdat) {
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
MGETHDR(n, M_DONTWAIT, MT_HEADER);
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (n == NULL) {
Slightly rearrange a code in rev. 1.164: o Move len initialization closer to place of its first usage. o Compare len with 0 to improve readability. o Explicitly zero out phlen in ip_insertoptions() in failure case. Suggested by: jhb Reviewed by: jhb MFC after: 2 weeks
2002-09-23 08:56:24 +00:00
*phlen = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (m);
Slightly rearrange a code in rev. 1.164: o Move len initialization closer to place of its first usage. o Compare len with 0 to improve readability. o Explicitly zero out phlen in ip_insertoptions() in failure case. Suggested by: jhb Reviewed by: jhb MFC after: 2 weeks
2002-09-23 08:56:24 +00:00
}
Correctly move the packet header in ip_insertoptions(). Reported by: Anupam Chanda Reviewed by: sam@ MFC after: 2 weeks
2005-01-23 19:43:46 +00:00
M_MOVE_PKTHDR(n, m);
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
n->m_pkthdr.rcvif = NULL;
Introduce support for Mandatory Access Control and extensible kernel access control. When fragmenting an IP datagram, invoke an appropriate MAC entry point so that MAC labels may be copied (...) to the individual IP fragment mbufs by MAC policies. When IP options are inserted into an IP datagram when leaving a host, preserve the label if we need to reallocate the mbuf for alignment or size reasons. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-31 17:21:01 +00:00
#ifdef MAC
Eliminate MAC entry point mac_create_mbuf_from_mbuf(), which is redundant with respect to existing mbuf copy label routines. Expose a new mac_copy_mbuf() routine at the top end of the Framework and use that; use the existing mpo_copy_mbuf_label() routine on the bottom end. Obtained from: TrustedBSD Project Sponsored by: SPARTA, SPAWAR Approved by: re (scottl)
2005-07-05 23:39:51 +00:00
mac_copy_mbuf(m, n);
Introduce support for Mandatory Access Control and extensible kernel access control. When fragmenting an IP datagram, invoke an appropriate MAC entry point so that MAC labels may be copied (...) to the individual IP fragment mbufs by MAC policies. When IP options are inserted into an IP datagram when leaving a host, preserve the label if we need to reallocate the mbuf for alignment or size reasons. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-31 17:21:01 +00:00
#endif
Correctly move the packet header in ip_insertoptions(). Reported by: Anupam Chanda Reviewed by: sam@ MFC after: 2 weeks
2005-01-23 19:43:46 +00:00
n->m_pkthdr.len += optlen;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m->m_len -= sizeof(struct ip);
m->m_data += sizeof(struct ip);
n->m_next = m;
m = n;
m->m_len = optlen + sizeof(struct ip);
m->m_data += max_linkhdr;
Replace memcpy() and ovbcopy() with bcopy(); ditch some caddr_t usage.
2003-04-04 12:14:00 +00:00
bcopy(ip, mtod(m, void *), sizeof(struct ip));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else {
m->m_data -= optlen;
m->m_len += optlen;
m->m_pkthdr.len += optlen;
Replace memcpy() and ovbcopy() with bcopy(); ditch some caddr_t usage.
2003-04-04 12:14:00 +00:00
bcopy(ip, mtod(m, void *), sizeof(struct ip));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
ip = mtod(m, struct ip *);
Changed some memcpy()'s back to bcopy()'s. gcc only inlines memcpy()'s whose count is constant and didn't inline these. I want memcpy() in the kernel go away so that it's obvious that it doesn't need to be optimized. Now it is only used for one struct copy in si.c.
1996-06-08 08:19:03 +00:00
bcopy(p->ipopt_list, ip + 1, optlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*phlen = sizeof(struct ip) + optlen;
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
ip->ip_v = IPVERSION;
ip->ip_hl = *phlen >> 2;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->ip_len += optlen;
return (m);
}
/*
* Copy options from ip to jp,
* omitting those not copied during fragmentation.
*/
Resolve conflicts created by import.
1997-04-03 10:47:12 +00:00
int
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
ip_optcopy(ip, jp)
struct ip *ip, *jp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
register u_char *cp, *dp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int opt, optlen, cnt;
cp = (u_char *)(ip + 1);
dp = (u_char *)(jp + 1);
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
cnt = (ip->ip_hl << 2) - sizeof (struct ip);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (; cnt > 0; cnt -= optlen, cp += optlen) {
opt = cp[0];
if (opt == IPOPT_EOL)
break;
if (opt == IPOPT_NOP) {
/* Preserve for IP mcast tunnel's LSRR alignment. */
*dp++ = IPOPT_NOP;
optlen = 1;
continue;
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
}
- Change the newly turned INVARIANTS #ifdef blocks (they were changed from DIAGNOSTIC yesterday) into KASSERT()'s as these help to increase code readability.
2002-05-21 18:52:24 +00:00
KASSERT(cnt >= IPOPT_OLEN + sizeof(*cp),
("ip_optcopy: malformed ipv4 option"));
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
optlen = cp[IPOPT_OLEN];
- Change the newly turned INVARIANTS #ifdef blocks (they were changed from DIAGNOSTIC yesterday) into KASSERT()'s as these help to increase code readability.
2002-05-21 18:52:24 +00:00
KASSERT(optlen >= IPOPT_OLEN + sizeof(*cp) && optlen <= cnt,
("ip_optcopy: malformed ipv4 option"));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/* bogus lengths should have been caught by ip_dooptions */
if (optlen > cnt)
optlen = cnt;
if (IPOPT_COPIED(opt)) {
Changed some memcpy()'s back to bcopy()'s. gcc only inlines memcpy()'s whose count is constant and didn't inline these. I want memcpy() in the kernel go away so that it's obvious that it doesn't need to be optimized. Now it is only used for one struct copy in si.c.
1996-06-08 08:19:03 +00:00
bcopy(cp, dp, optlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
dp += optlen;
}
}
for (optlen = dp - (u_char *)(jp+1); optlen & 0x3; optlen++)
*dp++ = IPOPT_EOL;
return (optlen);
}
/*
* IP socket option processing.
*/
int
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
ip_ctloutput(so, sopt)
struct socket *so;
struct sockopt *sopt;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
struct inpcb *inp = sotoinpcb(so);
int error, optval;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = optval = 0;
if (sopt->sopt_level != IPPROTO_IP) {
return (EINVAL);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
switch (sopt->sopt_dir) {
case SOPT_SET:
switch (sopt->sopt_name) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_OPTIONS:
#ifdef notyet
case IP_RETOPTS:
#endif
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
{
struct mbuf *m;
if (sopt->sopt_valsize > MLEN) {
error = EMSGSIZE;
break;
}
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
MGET(m, sopt->sopt_td ? M_TRYWAIT : M_DONTWAIT, MT_HEADER);
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if (m == NULL) {
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = ENOBUFS;
break;
}
m->m_len = sopt->sopt_valsize;
error = sooptcopyin(sopt, mtod(m, char *), m->m_len,
m->m_len);
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
INP_LOCK(inp);
error = ip_pcbopts(inp, sopt->sopt_name, m);
INP_UNLOCK(inp);
return (error);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_TOS:
case IP_TTL:
case IP_RECVOPTS:
case IP_RECVRETOPTS:
case IP_RECVDSTADDR:
IP_RECVTTL socket option. Reviewed by: Stuart Cheshire <cheshire@apple.com>
2003-04-29 21:36:18 +00:00
case IP_RECVTTL:
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
case IP_RECVIF:
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
case IP_FAITH:
Add the IP_ONESBCAST option, to enable undirected IP broadcasts to be sent on specific interfaces. This is required by aodvd, and may in future help us in getting rid of the requirement for BPF from our import of isc-dhcp. Suggested by: fenestro Obtained from: BSD/OS Reviewed by: mini, sam Approved by: jake (mentor)
2003-08-20 14:46:40 +00:00
case IP_ONESBCAST:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyin(sopt, &optval, sizeof optval,
sizeof optval);
if (error)
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
switch (sopt->sopt_name) {
case IP_TOS:
inp->inp_ip_tos = optval;
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_TTL:
inp->inp_ip_ttl = optval;
break;
In ip_ctloutput(), acquire the inpcb lock around some of the basic inpcb flag and status updates.
2004-06-24 02:05:47 +00:00
#define OPTSET(bit) do { \
INP_LOCK(inp); \
if (optval) \
inp->inp_flags |= bit; \
else \
inp->inp_flags &= ~bit; \
INP_UNLOCK(inp); \
} while (0)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_RECVOPTS:
OPTSET(INP_RECVOPTS);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_RECVRETOPTS:
OPTSET(INP_RECVRETOPTS);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_RECVDSTADDR:
OPTSET(INP_RECVDSTADDR);
break;
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
IP_RECVTTL socket option. Reviewed by: Stuart Cheshire <cheshire@apple.com>
2003-04-29 21:36:18 +00:00
case IP_RECVTTL:
OPTSET(INP_RECVTTL);
break;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_RECVIF:
OPTSET(INP_RECVIF);
break;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
case IP_FAITH:
OPTSET(INP_FAITH);
break;
Add the IP_ONESBCAST option, to enable undirected IP broadcasts to be sent on specific interfaces. This is required by aodvd, and may in future help us in getting rid of the requirement for BPF from our import of isc-dhcp. Suggested by: fenestro Obtained from: BSD/OS Reviewed by: mini, sam Approved by: jake (mentor)
2003-08-20 14:46:40 +00:00
case IP_ONESBCAST:
OPTSET(INP_ONESBCAST);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
break;
#undef OPTSET
case IP_MULTICAST_IF:
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
case IP_MULTICAST_VIF:
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_MULTICAST_TTL:
case IP_MULTICAST_LOOP:
case IP_ADD_MEMBERSHIP:
case IP_DROP_MEMBERSHIP:
Push the inpcb argument into ip_setmoptions() when setting IP multicast socket options, so that it is available for locking.
2004-12-05 21:38:33 +00:00
error = ip_setmoptions(inp, sopt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
case IP_PORTRANGE:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyin(sopt, &optval, sizeof optval,
sizeof optval);
if (error)
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
In ip_ctloutput(), acquire the inpcb lock around some of the basic inpcb flag and status updates.
2004-06-24 02:05:47 +00:00
INP_LOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
switch (optval) {
case IP_PORTRANGE_DEFAULT:
inp->inp_flags &= ~(INP_LOWPORT);
inp->inp_flags &= ~(INP_HIGHPORT);
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_PORTRANGE_HIGH:
inp->inp_flags &= ~(INP_LOWPORT);
inp->inp_flags |= INP_HIGHPORT;
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_PORTRANGE_LOW:
inp->inp_flags &= ~(INP_HIGHPORT);
inp->inp_flags |= INP_LOWPORT;
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
default:
error = EINVAL;
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
}
In ip_ctloutput(), acquire the inpcb lock around some of the basic inpcb flag and status updates.
2004-06-24 02:05:47 +00:00
INP_UNLOCK(inp);
Fix an embarresing error on my part that made the IP_PORTRANGE options return a failure code (even though it worked). This commit brought to you by the 'C' keyword "break".. :-)
1996-05-21 20:47:31 +00:00
break;
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
#if defined(IPSEC) || defined(FAST_IPSEC)
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
case IP_IPSEC_POLICY:
{
caddr_t req;
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
size_t len = 0;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
int priv;
struct mbuf *m;
int optname;
if ((error = soopt_getm(sopt, &m)) != 0) /* XXX */
break;
if ((error = soopt_mcopyin(sopt, m)) != 0) /* XXX */
break;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
priv = (sopt->sopt_td != NULL &&
Change the suser() API to take advantage of td_ucred as well as do a general cleanup of the API. The entire API now consists of two functions similar to the pre-KSE API. The suser() function takes a thread pointer as its only argument. The td_ucred member of this thread must be valid so the only valid thread pointers are curthread and a few kernel threads such as thread0. The suser_cred() function takes a pointer to a struct ucred as its first argument and an integer flag as its second argument. The flag is currently only used for the PRISON_ROOT flag. Discussed on: smp@
2002-04-01 21:31:13 +00:00
suser(sopt->sopt_td) != 0) ? 0 : 1;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
req = mtod(m, caddr_t);
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
len = m->m_len;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
optname = sopt->sopt_name;
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
error = ipsec4_set_policy(inp, optname, req, len, priv);
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
m_freem(m);
break;
}
#endif /*IPSEC*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
default:
error = ENOPROTOOPT;
break;
}
break;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case SOPT_GET:
switch (sopt->sopt_name) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_OPTIONS:
case IP_RETOPTS:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (inp->inp_options)
error = sooptcopyout(sopt,
mtod(inp->inp_options,
char *),
inp->inp_options->m_len);
else
sopt->sopt_valsize = 0;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case IP_TOS:
case IP_TTL:
case IP_RECVOPTS:
case IP_RECVRETOPTS:
case IP_RECVDSTADDR:
IP_RECVTTL socket option. Reviewed by: Stuart Cheshire <cheshire@apple.com>
2003-04-29 21:36:18 +00:00
case IP_RECVTTL:
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
case IP_RECVIF:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_PORTRANGE:
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
case IP_FAITH:
Add the IP_ONESBCAST option, to enable undirected IP broadcasts to be sent on specific interfaces. This is required by aodvd, and may in future help us in getting rid of the requirement for BPF from our import of isc-dhcp. Suggested by: fenestro Obtained from: BSD/OS Reviewed by: mini, sam Approved by: jake (mentor)
2003-08-20 14:46:40 +00:00
case IP_ONESBCAST:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
switch (sopt->sopt_name) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_TOS:
Reorganize elements of the inpcb struct to take better advantage of cache lines. Removed the struct ip proto since only a couple of chars were actually being used in it. Changed the order of compares in the PCB hash lookup to take advantage of partial cache line fills (on PPro). Discussed-with: wollman
1997-04-03 05:14:45 +00:00
optval = inp->inp_ip_tos;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case IP_TTL:
Reorganize elements of the inpcb struct to take better advantage of cache lines. Removed the struct ip proto since only a couple of chars were actually being used in it. Changed the order of compares in the PCB hash lookup to take advantage of partial cache line fills (on PPro). Discussed-with: wollman
1997-04-03 05:14:45 +00:00
optval = inp->inp_ip_ttl;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
#define OPTBIT(bit) (inp->inp_flags & bit ? 1 : 0)
case IP_RECVOPTS:
optval = OPTBIT(INP_RECVOPTS);
break;
case IP_RECVRETOPTS:
optval = OPTBIT(INP_RECVRETOPTS);
break;
case IP_RECVDSTADDR:
optval = OPTBIT(INP_RECVDSTADDR);
break;
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
IP_RECVTTL socket option. Reviewed by: Stuart Cheshire <cheshire@apple.com>
2003-04-29 21:36:18 +00:00
case IP_RECVTTL:
optval = OPTBIT(INP_RECVTTL);
break;
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
case IP_RECVIF:
optval = OPTBIT(INP_RECVIF);
break;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
case IP_PORTRANGE:
if (inp->inp_flags & INP_HIGHPORT)
optval = IP_PORTRANGE_HIGH;
else if (inp->inp_flags & INP_LOWPORT)
optval = IP_PORTRANGE_LOW;
else
optval = 0;
break;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
case IP_FAITH:
optval = OPTBIT(INP_FAITH);
break;
Add the IP_ONESBCAST option, to enable undirected IP broadcasts to be sent on specific interfaces. This is required by aodvd, and may in future help us in getting rid of the requirement for BPF from our import of isc-dhcp. Suggested by: fenestro Obtained from: BSD/OS Reviewed by: mini, sam Approved by: jake (mentor)
2003-08-20 14:46:40 +00:00
case IP_ONESBCAST:
optval = OPTBIT(INP_ONESBCAST);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyout(sopt, &optval, sizeof optval);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case IP_MULTICAST_IF:
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
case IP_MULTICAST_VIF:
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_MULTICAST_TTL:
case IP_MULTICAST_LOOP:
case IP_ADD_MEMBERSHIP:
case IP_DROP_MEMBERSHIP:
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
error = ip_getmoptions(inp, sopt);
Make the default behavior of local port assignment match traditional systems (my last change did not mix well with some firewall configurations). As much as I dislike firewalls, this is one thing I I was not prepared to break by default.. :-) Allow the user to nominate one of three ranges of port numbers as candidates for selecting a local address to replace a zero port number. The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg) call. The three ranges are: default, high (to bypass firewalls) and low (to get a port below 1024). The default and high port ranges are sysctl settable under sysctl net.inet.ip.portrange.* This code also fixes a potential deadlock if the system accidently ran out of local port addresses. It'd drop into an infinite while loop. The secure port selection (for root) should reduce overheads and increase reliability of rlogin/rlogind/rsh/rshd if they are modified to take advantage of it. Partly suggested by: pst Reviewed by: wollman
1996-02-22 21:32:23 +00:00
break;
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
#if defined(IPSEC) || defined(FAST_IPSEC)
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
case IP_IPSEC_POLICY:
{
Initialize mbuf pointer at getting ipsec policy. Without this, kernel will panic at getsockopt() of IPSEC_POLICY. Also make compilable libipsec/test-policy.c which tries getsockopt() of IPSEC_POLICY. Approved by: jkh Submitted by: sakane@kame.net
2000-03-09 14:57:16 +00:00
struct mbuf *m = NULL;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
caddr_t req = NULL;
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
size_t len = 0;
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
if (m != 0) {
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
req = mtod(m, caddr_t);
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
len = m->m_len;
}
error = ipsec4_get_policy(sotoinpcb(so), req, len, &m);
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
if (error == 0)
error = soopt_mcopyout(sopt, m); /* XXX */
Initialize mbuf pointer at getting ipsec policy. Without this, kernel will panic at getsockopt() of IPSEC_POLICY. Also make compilable libipsec/test-policy.c which tries getsockopt() of IPSEC_POLICY. Approved by: jkh Submitted by: sakane@kame.net
2000-03-09 14:57:16 +00:00
if (error == 0)
m_freem(m);
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
break;
}
#endif /*IPSEC*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
default:
error = ENOPROTOOPT;
break;
}
break;
}
return (error);
}
/*
* Set up IP options in pcb for insertion in output packets.
* Store in mbuf with pointer in pcbopt, adding pseudo-option
* with destination address if source routed.
*/
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
static int
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
register int cnt, optlen;
register u_char *cp;
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
struct mbuf **pcbopt;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
u_char opt;
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
INP_LOCK_ASSERT(inp);
pcbopt = &inp->inp_options;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/* turn off any old options */
if (*pcbopt)
(void)m_free(*pcbopt);
*pcbopt = 0;
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
if (m == NULL || m->m_len == 0) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Only turning off any previous options.
*/
Start working through inpcb locking for ip_ctloutput() by cleaning up modifications to the inpcb IP options mbuf: - Lock the inpcb before passing it into ip_pcbopts() in order to prevent simulatenous reads and read-modify-writes that could result in races. - Pass the inpcb reference into ip_pcbopts() instead of the option chain pointer in the inpcb. - Assert the inpcb lock in ip_pcbots. - Convert one or two uses of a pointer as a boolean or an integer comparison to a comparison with NULL for readability.
2004-12-05 19:11:09 +00:00
if (m != NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
(void)m_free(m);
return (0);
}
Fixed some longs that should have been fixed-sized types.
1998-07-13 12:12:25 +00:00
if (m->m_len % sizeof(int32_t))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
/*
* IP first-hop destination address will be stored before
* actual options; move other options back
* and clear it when none present.
*/
if (m->m_data + m->m_len + sizeof(struct in_addr) >= &m->m_dat[MLEN])
goto bad;
cnt = m->m_len;
m->m_len += sizeof(struct in_addr);
cp = mtod(m, u_char *) + sizeof(struct in_addr);
Replace memcpy() and ovbcopy() with bcopy(); ditch some caddr_t usage.
2003-04-04 12:14:00 +00:00
bcopy(mtod(m, void *), cp, (unsigned)cnt);
bzero(mtod(m, void *), sizeof(struct in_addr));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (; cnt > 0; cnt -= optlen, cp += optlen) {
opt = cp[IPOPT_OPTVAL];
if (opt == IPOPT_EOL)
break;
if (opt == IPOPT_NOP)
optlen = 1;
else {
Add boundary checks against IP options. Obtained from: OpenBSD
2000-06-02 20:18:38 +00:00
if (cnt < IPOPT_OLEN + sizeof(*cp))
goto bad;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
optlen = cp[IPOPT_OLEN];
Add boundary checks against IP options. Obtained from: OpenBSD
2000-06-02 20:18:38 +00:00
if (optlen < IPOPT_OLEN + sizeof(*cp) || optlen > cnt)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
}
switch (opt) {
default:
break;
case IPOPT_LSRR:
case IPOPT_SSRR:
/*
* user process specifies route as:
* ->A->B->C->D
* D must be our final destination (but we can't
* check that since we may not have connected yet).
* A is first hop destination, which doesn't appear in
* actual IP option, but is stored before the options.
*/
if (optlen < IPOPT_MINOFF - 1 + sizeof(struct in_addr))
goto bad;
m->m_len -= sizeof(struct in_addr);
cnt -= sizeof(struct in_addr);
optlen -= sizeof(struct in_addr);
cp[IPOPT_OLEN] = optlen;
/*
* Move first hop before start of options.
*/
bcopy((caddr_t)&cp[IPOPT_OFFSET+1], mtod(m, caddr_t),
sizeof(struct in_addr));
/*
* Then copy rest of options back
* to close up the deleted entry.
*/
Replace memcpy() and ovbcopy() with bcopy(); ditch some caddr_t usage.
2003-04-04 12:14:00 +00:00
bcopy((&cp[IPOPT_OFFSET+1] + sizeof(struct in_addr)),
&cp[IPOPT_OFFSET+1],
o Calculate a number of bytes to copy (cnt) correctly: +----+-+-+-+-+----+----+- - - - - - - - - - - - -+----+ | | |C| | | | | | | | IP |N|O|L|P| | IP | | IP | | #1 |O|D|E|T| | #2 | | #n | | |P|E|N|R| | | | | +----+-+-+-+-+----+----+- - - - - - - - - - - - -+----+ ^ ^<---- cnt - (IPOPT_MINOFF - 1) ---->| | | src | +-- cp[IPOPT_OFF + 1] + sizeof(struct in_addr) | dst +-- cp[IPOPT_OFF + 1] PR: kern/66386 Submitted by: Andrei Iltchenko MFC after: 3 weeks
2004-05-11 19:14:44 +00:00
(unsigned)cnt - (IPOPT_MINOFF - 1));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
}
if (m->m_len > MAX_IPOPTLEN + sizeof(struct in_addr))
goto bad;
*pcbopt = m;
return (0);
bad:
(void)m_free(m);
return (EINVAL);
}
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
/*
* XXX
* The whole multicast option thing needs to be re-thought.
* Several of these options are equally applicable to non-multicast
* transmission, and one (IP_MULTICAST_TTL) totally duplicates a
* standard option (IP_TTL).
*/
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/*
* following RFC1724 section 3.3, 0.0.0.0/8 is interpreted as interface index.
*/
static struct ifnet *
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
ip_multicast_if(a, ifindexp)
struct in_addr *a;
int *ifindexp;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
{
int ifindex;
struct ifnet *ifp;
if (ifindexp)
*ifindexp = 0;
if (ntohl(a->s_addr) >> 24 == 0) {
ifindex = ntohl(a->s_addr) & 0xffffff;
if (ifindex < 0 || if_index < ifindex)
return NULL;
Wrap array accesses in macros, which also happen to be lvalues: ifnet_addrs[i - 1] -> ifaddr_byindex(i) ifindex2ifnet[i] -> ifnet_byindex(i) This is intended to ease the conversion to SMPng.
2001-09-06 02:40:43 +00:00
ifp = ifnet_byindex(ifindex);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
if (ifindexp)
*ifindexp = ifindex;
} else {
INADDR_TO_IFP(*a, ifp);
}
return ifp;
}
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
/*
* Given an inpcb, return its multicast options structure pointer. Accepts
* an unlocked inpcb pointer, but will return it locked. May sleep.
*/
static struct ip_moptions *
ip_findmoptions(struct inpcb *inp)
{
struct ip_moptions *imo;
INP_LOCK(inp);
if (inp->inp_moptions != NULL)
return (inp->inp_moptions);
INP_UNLOCK(inp);
imo = (struct ip_moptions*)malloc(sizeof(*imo), M_IPMOPTS, M_WAITOK);
imo->imo_multicast_ifp = NULL;
imo->imo_multicast_addr.s_addr = INADDR_ANY;
imo->imo_multicast_vif = -1;
imo->imo_multicast_ttl = IP_DEFAULT_MULTICAST_TTL;
imo->imo_multicast_loop = IP_DEFAULT_MULTICAST_LOOP;
imo->imo_num_memberships = 0;
INP_LOCK(inp);
if (inp->inp_moptions != NULL) {
free(imo, M_IPMOPTS);
return (inp->inp_moptions);
}
inp->inp_moptions = imo;
return (imo);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Set the IP multicast options in response to user setsockopt().
*/
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
static int
Push the inpcb argument into ip_setmoptions() when setting IP multicast socket options, so that it is available for locking.
2004-12-05 21:38:33 +00:00
ip_setmoptions(struct inpcb *inp, struct sockopt *sopt)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
int error = 0;
int i;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct in_addr addr;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
struct ip_mreq mreq;
struct ifnet *ifp;
Push the inpcb argument into ip_setmoptions() when setting IP multicast socket options, so that it is available for locking.
2004-12-05 21:38:33 +00:00
struct ip_moptions *imo;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct route ro;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
struct sockaddr_in *dst;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
int ifindex;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
switch (sopt->sopt_name) {
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
/* store an index number for the vif you wanna use in the send */
case IP_MULTICAST_VIF:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (legal_vif_num == 0) {
Shuffle some functions and variables around to make it possible for multicast routing to be implemented as an LKM. (There's still a bit of work to do in this area.)
1994-09-14 03:10:15 +00:00
error = EOPNOTSUPP;
break;
}
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyin(sopt, &i, sizeof i, sizeof i);
if (error)
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
break;
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
if (!legal_vif_num(i) && (i != -1)) {
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
error = EINVAL;
break;
}
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
imo->imo_multicast_vif = i;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_MULTICAST_IF:
/*
* Select the interface for outgoing multicast packets.
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyin(sopt, &addr, sizeof addr, sizeof addr);
if (error)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
/*
* INADDR_ANY is used to remove a previous selection.
* When no interface is selected, a default one is
* chosen every time a multicast packet is sent.
*/
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (addr.s_addr == INADDR_ANY) {
imo->imo_multicast_ifp = NULL;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
/*
* The selected interface is identified by its local
* IP address. Find the interface and confirm that
* it supports multicasting.
*/
This should be splimp() rather than splnet() since ifaddrs might go away as a result of link-layer processing.
1995-03-20 18:31:51 +00:00
s = splimp();
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
ifp = ip_multicast_if(&addr, &ifindex);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ifp == NULL || (ifp->if_flags & IFF_MULTICAST) == 0) {
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Add missing splx(s) in IP_MULTICAST_IF Submitted by: Jim Binkley <jrb@cs.pdx.edu>
1996-03-26 18:56:51 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EADDRNOTAVAIL;
break;
}
imo->imo_multicast_ifp = ifp;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
if (ifindex)
imo->imo_multicast_addr = addr;
else
imo->imo_multicast_addr.s_addr = INADDR_ANY;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case IP_MULTICAST_TTL:
/*
* Set the IP time-to-live for outgoing multicast packets.
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
* The original multicast API required a char argument,
* which is inconsistent with the rest of the socket API.
* We allow either a char or an int.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (sopt->sopt_valsize == 1) {
u_char ttl;
error = sooptcopyin(sopt, &ttl, 1, 1);
if (error)
break;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
imo->imo_multicast_ttl = ttl;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
} else {
u_int ttl;
error = sooptcopyin(sopt, &ttl, sizeof ttl,
sizeof ttl);
if (error)
break;
if (ttl > 255)
error = EINVAL;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
else {
imo = ip_findmoptions(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
imo->imo_multicast_ttl = ttl;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
break;
case IP_MULTICAST_LOOP:
/*
* Set the loopback flag for outgoing multicast packets.
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
* Must be zero or one. The original multicast API required a
* char argument, which is inconsistent with the rest
* of the socket API. We allow either a char or an int.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (sopt->sopt_valsize == 1) {
u_char loop;
error = sooptcopyin(sopt, &loop, 1, 1);
if (error)
break;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
imo->imo_multicast_loop = !!loop;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
} else {
u_int loop;
error = sooptcopyin(sopt, &loop, sizeof loop,
sizeof loop);
if (error)
break;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
imo->imo_multicast_loop = !!loop;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
break;
case IP_ADD_MEMBERSHIP:
/*
* Add a multicast group membership.
* Group must be a valid IP multicast address.
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyin(sopt, &mreq, sizeof mreq, sizeof mreq);
if (error)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (!IN_MULTICAST(ntohl(mreq.imr_multiaddr.s_addr))) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EINVAL;
break;
}
This should be splimp() rather than splnet() since ifaddrs might go away as a result of link-layer processing.
1995-03-20 18:31:51 +00:00
s = splimp();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If no interface address was provided, use the interface of
* the route to the given multicast address.
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (mreq.imr_interface.s_addr == INADDR_ANY) {
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
bzero((caddr_t)&ro, sizeof(ro));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
dst = (struct sockaddr_in *)&ro.ro_dst;
dst->sin_len = sizeof(*dst);
dst->sin_family = AF_INET;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
dst->sin_addr = mreq.imr_multiaddr;
Introduce tcp_hostcache and remove the tcp specific metrics from the routing table. Move all usage and references in the tcp stack from the routing table metrics to the tcp hostcache. It caches measured parameters of past tcp sessions to provide better initial start values for following connections from or to the same source or destination. Depending on the network parameters to/from the remote host this can lead to significant speedups for new tcp connections after the first one because they inherit and shortcut the learning curve. tcp_hostcache is designed for multiple concurrent access in SMP environments with high contention and is hash indexed by remote ip address. It removes significant locking requirements from the tcp stack with regard to the routing table. Reviewed by: sam (mentor), bms Reviewed by: -net, -current, core@kame.net (IPv6 parts) Approved by: re (scottl)
2003-11-20 20:07:39 +00:00
rtalloc_ign(&ro, RTF_CLONING);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ro.ro_rt == NULL) {
error = EADDRNOTAVAIL;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
ifp = ro.ro_rt->rt_ifp;
Locking for updates to routing table entries. Each rtentry gets a mutex that covers updates to the contents. Note this is separate from holding a reference and/or locking the routing table itself. Other/related changes: o rtredirect loses the final parameter by which an rtentry reference may be returned; this was never used and added unwarranted complexity for locking. o minor style cleanups to routing code (e.g. ansi-fy function decls) o remove the logic to bump the refcnt on the parent of cloned routes, we assume the parent will remain as long as the clone; doing this avoids a circularity in locking during delete o convert some timeouts to MPSAFE callouts Notes: 1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level applications cannot/do-no know about mutex's. Doing this requires that the mutex be the last element in the structure. A better solution is to introduce an externalized version of struct rtentry but this is a major task because of the intertwining of rtentry and other data structures that are visible to user applications. 2. There are known LOR's that are expected to go away with forthcoming work to eliminate many held references. If not these will be resolved prior to release. 3. ATM changes are untested. Sponsored by: FreeBSD Foundation Obtained from: BSD/OS (partly)
2003-10-04 03:44:50 +00:00
RTFREE(ro.ro_rt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
else {
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
ifp = ip_multicast_if(&mreq.imr_interface, NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* See if we found an interface, and confirm that it
* supports multicast.
*/
if (ifp == NULL || (ifp->if_flags & IFF_MULTICAST) == 0) {
error = EADDRNOTAVAIL;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
/*
* See if the membership already exists or if all the
* membership slots are full.
*/
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = 0; i < imo->imo_num_memberships; ++i) {
if (imo->imo_membership[i]->inm_ifp == ifp &&
imo->imo_membership[i]->inm_addr.s_addr
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
== mreq.imr_multiaddr.s_addr)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
if (i < imo->imo_num_memberships) {
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EADDRINUSE;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
if (i == IP_MAX_MEMBERSHIPS) {
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = ETOOMANYREFS;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
/*
* Everything looks good; add a new record to the multicast
* address list for the given interface.
*/
if ((imo->imo_membership[i] =
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
in_addmulti(&mreq.imr_multiaddr, ifp)) == NULL) {
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = ENOBUFS;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
++imo->imo_num_memberships;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case IP_DROP_MEMBERSHIP:
/*
* Drop a multicast group membership.
* Group must be a valid IP multicast address.
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyin(sopt, &mreq, sizeof mreq, sizeof mreq);
if (error)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (!IN_MULTICAST(ntohl(mreq.imr_multiaddr.s_addr))) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EINVAL;
break;
}
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
This should be splimp() rather than splnet() since ifaddrs might go away as a result of link-layer processing.
1995-03-20 18:31:51 +00:00
s = splimp();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If an interface address was specified, get a pointer
* to its ifnet structure.
*/
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (mreq.imr_interface.s_addr == INADDR_ANY)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ifp = NULL;
else {
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
ifp = ip_multicast_if(&mreq.imr_interface, NULL);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (ifp == NULL) {
error = EADDRNOTAVAIL;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
}
/*
* Find the membership in the membership array.
*/
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
imo = ip_findmoptions(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = 0; i < imo->imo_num_memberships; ++i) {
if ((ifp == NULL ||
imo->imo_membership[i]->inm_ifp == ifp) &&
imo->imo_membership[i]->inm_addr.s_addr ==
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
mreq.imr_multiaddr.s_addr)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
if (i == imo->imo_num_memberships) {
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
error = EADDRNOTAVAIL;
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
/*
* Give up the multicast address record to which the
* membership points.
*/
in_delmulti(imo->imo_membership[i]);
/*
* Remove the gap in the membership array.
*/
for (++i; i < imo->imo_num_memberships; ++i)
imo->imo_membership[i-1] = imo->imo_membership[i];
--imo->imo_num_memberships;
Add helper function ip_findmoptions(), which accepts an inpcb, and attempts to atomically return either an existing set of IP multicast options for the PCB, or a newlly allocated set with default values. The inpcb is returned locked. This function may sleep. Call ip_moptions() to acquire a reference to a PCB's socket options, and perform the update of the options while holding the PCB lock. Release the lock before returning. Remove garbage collection of multicast options when values return to the default, as this complicates locking substantially. Most applications allocate a socket either to be multicast, or not, and don't tend to keep around sockets that have previously been used for multicast, then used for unicast. This closes a number of race conditions involving multiple threads or processes modifying the IP multicast state of a socket simultaenously. MFC after: 7 days
2005-08-09 17:19:21 +00:00
INP_UNLOCK(inp);
Fix race conditions involved in setting IP multicast options. This should fix Dennis Fortin's problem for good, if I've got it figured out right. (The problem was that a `struct ifaddr' could get deleted out from under the current requester, thus leaving him with an invalid interface pointer and causing even more bogus accesses.)
1995-03-20 18:11:31 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
default:
error = EOPNOTSUPP;
break;
}
return (error);
}
/*
* Return the IP multicast options in response to user getsockopt().
*/
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
static int
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
ip_getmoptions(struct inpcb *inp, struct sockopt *sopt)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
struct ip_moptions *imo;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
struct in_addr addr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct in_ifaddr *ia;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
int error, optval;
u_char coptval;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_LOCK(inp);
imo = inp->inp_moptions;
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = 0;
switch (sopt->sopt_name) {
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
case IP_MULTICAST_VIF:
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
if (imo != NULL)
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
optval = imo->imo_multicast_vif;
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
else
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
optval = -1;
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyout(sopt, &optval, sizeof optval);
break;
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_MULTICAST_IF:
if (imo == NULL || imo->imo_multicast_ifp == NULL)
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
addr.s_addr = INADDR_ANY;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
else if (imo->imo_multicast_addr.s_addr) {
/* return the value user has set */
addr = imo->imo_multicast_addr;
} else {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
IFP_TO_IA(imo->imo_multicast_ifp, ia);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
addr.s_addr = (ia == NULL) ? INADDR_ANY
: IA_SIN(ia)->sin_addr.s_addr;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = sooptcopyout(sopt, &addr, sizeof addr);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_MULTICAST_TTL:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (imo == 0)
optval = coptval = IP_DEFAULT_MULTICAST_TTL;
else
optval = coptval = imo->imo_multicast_ttl;
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (sopt->sopt_valsize == 1)
error = sooptcopyout(sopt, &coptval, 1);
else
error = sooptcopyout(sopt, &optval, sizeof optval);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case IP_MULTICAST_LOOP:
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (imo == 0)
optval = coptval = IP_DEFAULT_MULTICAST_LOOP;
else
optval = coptval = imo->imo_multicast_loop;
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
if (sopt->sopt_valsize == 1)
error = sooptcopyout(sopt, &coptval, 1);
else
error = sooptcopyout(sopt, &optval, sizeof optval);
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
default:
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_UNLOCK(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
error = ENOPROTOOPT;
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Pass the inpcb reference into ip_getmoptions() rather than just the inp->inp_moptions pointer, so that ip_getmoptions() can perform necessary locking when doing non-atomic reads. Lock the inpcb by default to copy any data to local variables, then unlock before performing sooptcopyout(). MFC after: 2 weeks
2004-12-05 22:08:37 +00:00
INP_UNLOCK_ASSERT(inp);
Yow! Completely change the way socket options are handled, eliminating another specialized mbuf type in the process. Also clean up some of the cruft surrounding IPFW, multicast routing, RSVP, and other ill-explored corners.
1998-08-23 03:07:17 +00:00
return (error);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Discard the IP multicast options.
*/
void
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
ip_freemoptions(imo)
register struct ip_moptions *imo;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
register int i;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (imo != NULL) {
for (i = 0; i < imo->imo_num_memberships; ++i)
in_delmulti(imo->imo_membership[i]);
free(imo, M_IPMOPTS);
}
}
/*
* Routine called from ip_output() to loop back a copy of an IP multicast
* packet to the input queue of a specified interface. Note that this
* calls the output routine of the loopback "driver", but with an interface
Cleanup loopback interface support. Reviewed by: wollman
1995-04-26 18:10:58 +00:00
* pointer that might NOT be a loopback interface -- evil, but easier than
* replicating that code here.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
static void
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
ip_mloopback(ifp, m, dst, hlen)
struct ifnet *ifp;
register struct mbuf *m;
register struct sockaddr_in *dst;
int hlen;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
register struct ip *ip;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct mbuf *copym;
Back out the ip_fragment() code -- it is not urgent to have it in now, I will put it back in in a better form after 5.0 is out. Requested by: sam, rwatson, luigi (on second thought) Approved by: re
2002-11-20 18:56:25 +00:00
copym = m_copy(m, 0, M_COPYALL);
Pull up the IP header in ip_mloopback(). This makes sure that the operations on the header inside ip_mloopback() are performed on a private copy instead of a shared cluster. PR: kern/3410
1997-05-06 21:22:04 +00:00
if (copym != NULL && (copym->m_flags & M_EXT || copym->m_len < hlen))
copym = m_pullup(copym, hlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (copym != NULL) {
Fixed a bug in previous revision: compute the payload checksum before we convert ip_len into a network byte order; in_delayed_cksum() still expects it in host byte order. The symtom was the ``in_cksum_skip: out of data by %d'' complaints from the kernel. To add to the previous commit log. These fixes make tcpdump(1) happy by not complaining about UDP/TCP checksum being bad for looped back IP multicast when multicast router is deactivated. Reported by: Vsevolod Lobko
2004-04-07 10:01:39 +00:00
/* If needed, compute the checksum and mark it as valid. */
if (copym->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
in_delayed_cksum(copym);
copym->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
copym->m_pkthdr.csum_flags |=
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
copym->m_pkthdr.csum_data = 0xffff;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* We don't bother to fragment if the IP length is greater
* than the interface's MTU. Can this possibly matter?
*/
ip = mtod(copym, struct ip *);
o Move NTOHL() and associated macros into <sys/param.h>. These are deprecated in favor of the POSIX-defined lowercase variants. o Change all occurrences of NTOHL() and associated marcros in the source tree to use the lowercase function variants. o Add missing license bits to sparc64's <machine/endian.h>. Approved by: jake o Clean up <machine/endian.h> files. o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>. o Remove prototypes for non-existent bswapXX() functions. o Include <machine/endian.h> in <arpa/inet.h> to define the POSIX-required ntohl() family of functions. o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>, and <sys/param.h>. o Prepend underscores to the ntohl() family to help deal with complexities associated with having MD (asm and inline) versions, and having to prevent exposure of these functions in other headers that happen to make use of endian-specific defines. o Create weak aliases to the canonical function name to help deal with third-party software forgetting to include an appropriate header. o Remove some now unneeded pollution from <sys/types.h>. o Add missing <arpa/inet.h> includes in userland. Tested on: alpha, i386 Reviewed by: bde, jake, tmm
2002-02-18 20:35:27 +00:00
ip->ip_len = htons(ip->ip_len);
ip->ip_off = htons(ip->ip_off);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ip->ip_sum = 0;
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
ip->ip_sum = in_cksum(copym, hlen);
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
/*
* NB:
Fix a comment and some commented-out code in ip_mloopback to reflect how multicast loopback really works.
1997-02-28 19:40:48 +00:00
* It's not clear whether there are any lingering
* reentrancy problems in other areas which might
* be exposed by using ip_input directly (in
* particular, everything which modifies the packet
* in-place). Yet another option is using the
* protosw directly to deliver the looped back
* packet. For the moment, we'll err on the side
Go through the loopback code with a broom.. Remove lots'o'hacks. looutput is now static. Other callers who want to use loopback to allow shortcutting should call the special entrypoint for this, if_simloop(), which is specifically designed for this purpose. Using looutput for this purpose was problematic, particularly with bpf and trying to keep track of whether one should be using the charateristics of the loopback interface or the interface (e.g. if_ethersubr.c) that was requesting the loopback. There was a whole class of errors due to this mis-use each of which had hacks to cover them up. Consists largly of hack removal :-)
1998-06-12 03:48:19 +00:00
* of safety by using if_simloop().
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
*/
Try narrow down the culprit sending undefined packet types through the loopback
1998-06-14 20:58:17 +00:00
#if 1 /* XXX */
if (dst->sin_family != AF_INET) {
fix another typo
1998-06-15 00:35:47 +00:00
printf("ip_mloopback: bad address family %d\n",
Try narrow down the culprit sending undefined packet types through the loopback
1998-06-14 20:58:17 +00:00
dst->sin_family);
dst->sin_family = AF_INET;
}
#endif
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
#ifdef notdef
Fix a comment and some commented-out code in ip_mloopback to reflect how multicast loopback really works.
1997-02-28 19:40:48 +00:00
copym->m_pkthdr.rcvif = ifp;
Go through the loopback code with a broom.. Remove lots'o'hacks. looutput is now static. Other callers who want to use loopback to allow shortcutting should call the special entrypoint for this, if_simloop(), which is specifically designed for this purpose. Using looutput for this purpose was problematic, particularly with bpf and trying to keep track of whether one should be using the charateristics of the loopback interface or the interface (e.g. if_ethersubr.c) that was requesting the loopback. There was a whole class of errors due to this mis-use each of which had hacks to cover them up. Consists largly of hack removal :-)
1998-06-12 03:48:19 +00:00
ip_input(copym);
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
#else
Just need to pass the address family to if_simloop(), not the whole sockaddr.
2000-05-24 21:16:56 +00:00
if_simloop(ifp, copym, dst->sin_family, 0);
Three speed-ups in the output path (two small, one substantial): 1) Require all callers to pass a valid route pointer to ip_output() so that we don't have to check and allocate one off the stack as was done before. This eliminates one test and some stack bloat from the common (UDP and TCP) case. 2) Perform the IP header checksum in-line if it's of the usual length. This results in about a 5% speed-up in my packet-generation test. 3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
1996-04-18 15:49:06 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
}
Reference in New Issue Copy Permalink