freebsd-skq/sbin/setkey/setkey.c

643 lines
13 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/* $KAME: setkey.c,v 1.28 2003/06/27 07:15:45 itojun Exp $ */
/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <err.h>
#include <net/route.h>
#include <netinet/in.h>
#include <net/pfkeyv2.h>
#include <netipsec/keydb.h>
#include <netipsec/key_debug.h>
#include <netipsec/ipsec.h>
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
#include <string.h>
#include <ctype.h>
#include <unistd.h>
#include <errno.h>
#include <netdb.h>
#include "libpfkey.h"
2007-11-07 10:53:41 +00:00
void usage(void);
int main(int, char **);
int get_supported(void);
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
void sendkeyshort(u_int, uint8_t);
2007-11-07 10:53:41 +00:00
void promisc(void);
int sendkeymsg(char *, size_t);
int postproc(struct sadb_msg *, int);
const char *numstr(int);
void shortdump_hdr(void);
void shortdump(struct sadb_msg *);
static void printdate(void);
static int32_t gmt2local(time_t);
#define MODE_SCRIPT 1
#define MODE_CMDDUMP 2
#define MODE_CMDFLUSH 3
#define MODE_PROMISC 4
int so;
int f_forever = 0;
int f_all = 0;
int f_verbose = 0;
int f_mode = 0;
int f_cmddump = 0;
int f_policy = 0;
int f_hexdump = 0;
int f_tflag = 0;
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
int f_scope = 0;
static time_t thiszone;
extern int lineno;
2007-11-07 10:53:41 +00:00
extern int parse(FILE **);
void
usage()
{
printf("usage: setkey [-v] -c\n");
printf(" setkey [-v] -f filename\n");
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
printf(" setkey [-Pagltv] -D\n");
printf(" setkey [-Pv] -F\n");
printf(" setkey [-h] -x\n");
exit(1);
}
int
main(ac, av)
int ac;
char **av;
{
FILE *fp = stdin;
int c;
if (ac == 1) {
usage();
/* NOTREACHED */
}
thiszone = gmt2local(0);
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
while ((c = getopt(ac, av, "acdf:ghltvxDFP")) != -1) {
switch (c) {
case 'c':
f_mode = MODE_SCRIPT;
fp = stdin;
break;
case 'f':
f_mode = MODE_SCRIPT;
if ((fp = fopen(optarg, "r")) == NULL) {
err(-1, "fopen");
/*NOTREACHED*/
}
break;
case 'D':
f_mode = MODE_CMDDUMP;
break;
case 'F':
f_mode = MODE_CMDFLUSH;
break;
case 'a':
f_all = 1;
break;
case 'l':
f_forever = 1;
break;
case 'h':
f_hexdump = 1;
break;
case 'x':
f_mode = MODE_PROMISC;
f_tflag++;
break;
case 'P':
f_policy = 1;
break;
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
case 'g': /* global */
f_scope |= IPSEC_POLICYSCOPE_GLOBAL;
break;
case 't': /* tunnel */
f_scope |= IPSEC_POLICYSCOPE_IFNET;
break;
case 'v':
f_verbose = 1;
break;
default:
usage();
/*NOTREACHED*/
}
}
so = pfkey_open();
if (so < 0) {
perror("pfkey_open");
exit(1);
}
switch (f_mode) {
case MODE_CMDDUMP:
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
sendkeyshort(f_policy ? SADB_X_SPDDUMP: SADB_DUMP,
f_policy ? f_scope: SADB_SATYPE_UNSPEC);
break;
case MODE_CMDFLUSH:
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
sendkeyshort(f_policy ? SADB_X_SPDFLUSH: SADB_FLUSH,
SADB_SATYPE_UNSPEC);
break;
case MODE_SCRIPT:
if (get_supported() < 0) {
errx(-1, "%s", ipsec_strerror());
/*NOTREACHED*/
}
if (parse(&fp))
exit (1);
break;
case MODE_PROMISC:
promisc();
/*NOTREACHED*/
default:
usage();
/*NOTREACHED*/
}
exit(0);
}
int
get_supported()
{
if (pfkey_send_register(so, SADB_SATYPE_UNSPEC) < 0)
return -1;
if (pfkey_recv_register(so) < 0)
return -1;
return 0;
}
void
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
sendkeyshort(u_int type, uint8_t satype)
{
struct sadb_msg msg;
msg.sadb_msg_version = PF_KEY_V2;
msg.sadb_msg_type = type;
msg.sadb_msg_errno = 0;
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
msg.sadb_msg_satype = satype;
msg.sadb_msg_len = PFKEY_UNIT64(sizeof(msg));
msg.sadb_msg_reserved = 0;
msg.sadb_msg_seq = 0;
msg.sadb_msg_pid = getpid();
sendkeymsg((char *)&msg, sizeof(msg));
return;
}
void
promisc()
{
struct sadb_msg msg;
u_char rbuf[1024 * 32]; /* XXX: Enough ? Should I do MSG_PEEK ? */
ssize_t l;
msg.sadb_msg_version = PF_KEY_V2;
msg.sadb_msg_type = SADB_X_PROMISC;
msg.sadb_msg_errno = 0;
msg.sadb_msg_satype = 1;
msg.sadb_msg_len = PFKEY_UNIT64(sizeof(msg));
msg.sadb_msg_reserved = 0;
msg.sadb_msg_seq = 0;
msg.sadb_msg_pid = getpid();
if ((l = send(so, &msg, sizeof(msg), 0)) < 0) {
err(1, "send");
/*NOTREACHED*/
}
while (1) {
struct sadb_msg *base;
if ((l = recv(so, rbuf, sizeof(*base), MSG_PEEK)) < 0) {
err(1, "recv");
/*NOTREACHED*/
}
if (l != sizeof(*base))
continue;
base = (struct sadb_msg *)rbuf;
if ((l = recv(so, rbuf, PFKEY_UNUNIT64(base->sadb_msg_len),
0)) < 0) {
err(1, "recv");
/*NOTREACHED*/
}
printdate();
if (f_hexdump) {
int i;
for (i = 0; i < l; i++) {
if (i % 16 == 0)
printf("%08x: ", i);
printf("%02x ", rbuf[i] & 0xff);
if (i % 16 == 15)
printf("\n");
}
if (l % 16)
printf("\n");
}
/* adjust base pointer for promisc mode */
if (base->sadb_msg_type == SADB_X_PROMISC) {
if ((ssize_t)sizeof(*base) < l)
base++;
else
base = NULL;
}
if (base) {
kdebug_sadb(base);
printf("\n");
fflush(stdout);
}
}
}
int
sendkeymsg(buf, len)
char *buf;
size_t len;
{
u_char rbuf[1024 * 32]; /* XXX: Enough ? Should I do MSG_PEEK ? */
ssize_t l;
struct sadb_msg *msg;
{
struct timeval tv;
tv.tv_sec = 1;
tv.tv_usec = 0;
if (setsockopt(so, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)) < 0) {
perror("setsockopt");
goto end;
}
}
if (f_forever)
shortdump_hdr();
again:
if (f_verbose) {
kdebug_sadb((struct sadb_msg *)buf);
printf("\n");
}
if (f_hexdump) {
int i;
for (i = 0; i < len; i++) {
if (i % 16 == 0)
printf("%08x: ", i);
printf("%02x ", buf[i] & 0xff);
if (i % 16 == 15)
printf("\n");
}
if (len % 16)
printf("\n");
}
if ((l = send(so, buf, len, 0)) < 0) {
perror("send");
goto end;
}
msg = (struct sadb_msg *)rbuf;
do {
if ((l = recv(so, rbuf, sizeof(rbuf), 0)) < 0) {
perror("recv");
goto end;
}
if (PFKEY_UNUNIT64(msg->sadb_msg_len) != l) {
warnx("invalid keymsg length");
break;
}
if (f_verbose) {
kdebug_sadb((struct sadb_msg *)rbuf);
printf("\n");
}
if (postproc(msg, l) < 0)
break;
} while (msg->sadb_msg_errno || msg->sadb_msg_seq);
if (f_forever) {
fflush(stdout);
sleep(1);
goto again;
}
end:
return(0);
}
int
postproc(msg, len)
struct sadb_msg *msg;
int len;
{
if (msg->sadb_msg_errno != 0) {
char inf[80];
const char *errmsg = NULL;
if (f_mode == MODE_SCRIPT)
snprintf(inf, sizeof(inf), "The result of line %d: ", lineno);
else
inf[0] = '\0';
switch (msg->sadb_msg_errno) {
case ENOENT:
switch (msg->sadb_msg_type) {
case SADB_DELETE:
case SADB_GET:
case SADB_X_SPDDELETE:
errmsg = "No entry";
break;
case SADB_DUMP:
errmsg = "No SAD entries";
break;
case SADB_X_SPDDUMP:
errmsg = "No SPD entries";
break;
}
break;
default:
errmsg = strerror(msg->sadb_msg_errno);
}
printf("%s%s.\n", inf, errmsg);
return(-1);
}
switch (msg->sadb_msg_type) {
case SADB_GET:
pfkey_sadump(msg);
break;
case SADB_DUMP:
/* filter out DEAD SAs */
if (!f_all) {
caddr_t mhp[SADB_EXT_MAX + 1];
struct sadb_sa *sa;
pfkey_align(msg, mhp);
pfkey_check(mhp);
if ((sa = (struct sadb_sa *)mhp[SADB_EXT_SA]) != NULL) {
if (sa->sadb_sa_state == SADB_SASTATE_DEAD)
break;
}
}
if (f_forever)
shortdump(msg);
else
pfkey_sadump(msg);
msg = (struct sadb_msg *)((caddr_t)msg +
PFKEY_UNUNIT64(msg->sadb_msg_len));
if (f_verbose) {
kdebug_sadb((struct sadb_msg *)msg);
printf("\n");
}
break;
case SADB_X_SPDDUMP:
pfkey_spdump(msg);
if (msg->sadb_msg_seq == 0) break;
msg = (struct sadb_msg *)((caddr_t)msg +
PFKEY_UNUNIT64(msg->sadb_msg_len));
if (f_verbose) {
kdebug_sadb((struct sadb_msg *)msg);
printf("\n");
}
break;
}
return(0);
}
/*------------------------------------------------------------*/
static const char *satype[] = {
NULL, NULL, "ah", "esp"
};
static const char *sastate[] = {
"L", "M", "D", "d"
};
static const char *ipproto[] = {
/*0*/ "ip", "icmp", "igmp", "ggp", "ip4",
NULL, "tcp", NULL, "egp", NULL,
/*10*/ NULL, NULL, NULL, NULL, NULL,
NULL, NULL, "udp", NULL, NULL,
/*20*/ NULL, NULL, "idp", NULL, NULL,
NULL, NULL, NULL, NULL, "tp",
/*30*/ NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL,
/*40*/ NULL, "ip6", NULL, "rt6", "frag6",
NULL, "rsvp", "gre", NULL, NULL,
/*50*/ "esp", "ah", NULL, NULL, NULL,
NULL, NULL, NULL, "icmp6", "none",
/*60*/ "dst6",
};
#define STR_OR_ID(x, tab) \
(((x) < sizeof(tab)/sizeof(tab[0]) && tab[(x)]) ? tab[(x)] : numstr(x))
const char *
numstr(x)
int x;
{
static char buf[20];
snprintf(buf, sizeof(buf), "#%d", x);
return buf;
}
void
shortdump_hdr()
{
printf("%-4s %-3s %-1s %-8s %-7s %s -> %s\n",
"time", "p", "s", "spi", "ltime", "src", "dst");
}
void
shortdump(msg)
struct sadb_msg *msg;
{
caddr_t mhp[SADB_EXT_MAX + 1];
char buf[NI_MAXHOST], pbuf[NI_MAXSERV];
struct sadb_sa *sa;
struct sadb_address *saddr;
struct sadb_lifetime *lts, *lth, *ltc;
struct sockaddr *s;
u_int t;
time_t cur = time(0);
pfkey_align(msg, mhp);
pfkey_check(mhp);
printf("%02lu%02lu", (u_long)(cur % 3600) / 60, (u_long)(cur % 60));
printf(" %-3s", STR_OR_ID(msg->sadb_msg_satype, satype));
if ((sa = (struct sadb_sa *)mhp[SADB_EXT_SA]) != NULL) {
printf(" %-1s", STR_OR_ID(sa->sadb_sa_state, sastate));
printf(" %08x", (u_int32_t)ntohl(sa->sadb_sa_spi));
} else
printf("%-1s %-8s", "?", "?");
lts = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_SOFT];
lth = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_HARD];
ltc = (struct sadb_lifetime *)mhp[SADB_EXT_LIFETIME_CURRENT];
if (lts && lth && ltc) {
if (ltc->sadb_lifetime_addtime == 0)
t = (u_long)0;
else
t = (u_long)(cur - ltc->sadb_lifetime_addtime);
if (t >= 1000)
strlcpy(buf, " big/", sizeof(buf));
else
snprintf(buf, sizeof(buf), " %3lu/", (u_long)t);
printf("%s", buf);
t = (u_long)lth->sadb_lifetime_addtime;
if (t >= 1000)
strlcpy(buf, "big", sizeof(buf));
else
snprintf(buf, sizeof(buf), "%-3lu", (u_long)t);
printf("%s", buf);
} else
printf(" ??\?/???"); /* backslash to avoid trigraph ??/ */
printf(" ");
if ((saddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_SRC]) != NULL) {
if (saddr->sadb_address_proto)
printf("%s ", STR_OR_ID(saddr->sadb_address_proto, ipproto));
s = (struct sockaddr *)(saddr + 1);
getnameinfo(s, s->sa_len, buf, sizeof(buf),
pbuf, sizeof(pbuf), NI_NUMERICHOST|NI_NUMERICSERV);
if (strcmp(pbuf, "0") != 0)
printf("%s[%s]", buf, pbuf);
else
printf("%s", buf);
} else
printf("?");
printf(" -> ");
if ((saddr = (struct sadb_address *)mhp[SADB_EXT_ADDRESS_DST]) != NULL) {
if (saddr->sadb_address_proto)
printf("%s ", STR_OR_ID(saddr->sadb_address_proto, ipproto));
s = (struct sockaddr *)(saddr + 1);
getnameinfo(s, s->sa_len, buf, sizeof(buf),
pbuf, sizeof(pbuf), NI_NUMERICHOST|NI_NUMERICSERV);
if (strcmp(pbuf, "0") != 0)
printf("%s[%s]", buf, pbuf);
else
printf("%s", buf);
} else
printf("?");
printf("\n");
}
/* From: tcpdump(1):gmt2local.c and util.c */
/*
* Print the timestamp
*/
static void
printdate()
{
struct timeval tp;
int s;
if (gettimeofday(&tp, NULL) == -1) {
perror("gettimeofday");
return;
}
if (f_tflag == 1) {
/* Default */
s = (tp.tv_sec + thiszone ) % 86400;
(void)printf("%02d:%02d:%02d.%06u ",
s / 3600, (s % 3600) / 60, s % 60, (u_int32_t)tp.tv_usec);
} else if (f_tflag > 1) {
/* Unix timeval style */
(void)printf("%u.%06u ",
(u_int32_t)tp.tv_sec, (u_int32_t)tp.tv_usec);
}
printf("\n");
}
/*
* Returns the difference between gmt and local time in seconds.
* Use gmtime() and localtime() to keep things simple.
*/
int32_t
gmt2local(time_t t)
{
register int dt, dir;
register struct tm *gmt, *loc;
struct tm sgmt;
if (t == 0)
t = time(NULL);
gmt = &sgmt;
*gmt = *gmtime(&t);
loc = localtime(&t);
dt = (loc->tm_hour - gmt->tm_hour) * 60 * 60 +
(loc->tm_min - gmt->tm_min) * 60;
/*
* If the year or julian day is different, we span 00:00 GMT
* and must add or subtract a day. Check the year first to
* avoid problems when the julian day wraps.
*/
dir = loc->tm_year - gmt->tm_year;
if (dir == 0)
dir = loc->tm_yday - gmt->tm_yday;
dt += dir * 24 * 60 * 60;
return (dt);
}