d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6d2ea50e04
freebsd-skq/sys/net80211/ieee80211_proto.h

248 lines
9.4 KiB
C
Raw Normal View History

new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
/*-
revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp>
2003-06-27 05:13:52 +00:00
* Copyright (c) 2001 Atsushi Onoe
bump copyright for 2005
2004-12-31 22:42:38 +00:00
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp>
2003-06-27 05:13:52 +00:00
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
*
revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp>
2003-06-27 05:13:52 +00:00
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_PROTO_H_
#define _NET80211_IEEE80211_PROTO_H_
/*
* 802.11 protocol implementation definitions.
*/
enum ieee80211_state {
o change ieee80211_new_state handling to use a proper method that drivers override in their sub-class; this eliminates the hack of interpreting the EINPROGRESS return value to mean "don't do any of the normal work" o correct active scanning so the first channel is only scanned once and so per-channel passive mode is properly honored o expose 802.11 FSM state names so every driver doesn't keep a private copy o eliminate node parameter to ieee80211_begin_scan; it was not being used
2003-07-20 21:36:08 +00:00
IEEE80211_S_INIT = 0, /* default state */
IEEE80211_S_SCAN = 1, /* scanning */
IEEE80211_S_AUTH = 2, /* try to authenticate */
IEEE80211_S_ASSOC = 3, /* try to assoc */
IEEE80211_S_RUN = 4, /* associated */
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
};
o change ieee80211_new_state handling to use a proper method that drivers override in their sub-class; this eliminates the hack of interpreting the EINPROGRESS return value to mean "don't do any of the normal work" o correct active scanning so the first channel is only scanned once and so per-channel passive mode is properly honored o expose 802.11 FSM state names so every driver doesn't keep a private copy o eliminate node parameter to ieee80211_begin_scan; it was not being used
2003-07-20 21:36:08 +00:00
#define IEEE80211_S_MAX (IEEE80211_S_RUN+1)
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
#define IEEE80211_SEND_MGMT(_ic,_ni,_type,_arg) \
((*(_ic)->ic_send_mgmt)(_ic, _ni, _type, _arg))
extern const char *ieee80211_mgt_subtype_name[];
expose ieee80211_phymode_name for use in debug msgs
2004-12-31 20:38:48 +00:00
extern const char *ieee80211_phymode_name[];
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
extern void ieee80211_proto_attach(struct ieee80211com *);
extern void ieee80211_proto_detach(struct ieee80211com *);
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
struct ieee80211_node;
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
extern void ieee80211_input(struct ieee80211com *, struct mbuf *,
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
struct ieee80211_node *, int, u_int32_t);
extern void ieee80211_recv_mgmt(struct ieee80211com *, struct mbuf *,
struct ieee80211_node *, int, int, u_int32_t);
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
extern int ieee80211_send_nulldata(struct ieee80211com *,
struct ieee80211_node *);
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
extern int ieee80211_send_mgmt(struct ieee80211com *, struct ieee80211_node *,
int, int);
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
extern int ieee80211_classify(struct ieee80211com *, struct mbuf *,
struct ieee80211_node *);
extern struct mbuf *ieee80211_encap(struct ieee80211com *, struct mbuf *,
struct ieee80211_node *);
extern void ieee80211_pwrsave(struct ieee80211com *, struct ieee80211_node *,
struct mbuf *);
extern void ieee80211_reset_erp(struct ieee80211com *);
extern void ieee80211_set_shortslottime(struct ieee80211com *, int onoff);
extern int ieee80211_iserp_rateset(struct ieee80211com *,
struct ieee80211_rateset *);
extern void ieee80211_set11gbasicrates(struct ieee80211_rateset *,
enum ieee80211_phymode);
/*
* Return the size of the 802.11 header for a management or data frame.
*/
s/inline/__inline/
2004-12-31 21:30:42 +00:00
static __inline int
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
ieee80211_hdrsize(const void *data)
{
const struct ieee80211_frame *wh = data;
int size = sizeof(struct ieee80211_frame);
/* NB: we don't handle control frames */
KASSERT((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL,
("%s: control frame", __func__));
if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS)
size += IEEE80211_ADDR_LEN;
if (IEEE80211_QOS_HAS_SEQ(wh))
size += sizeof(u_int16_t);
return size;
}
/*
* Return the size of the 802.11 header; handles any type of frame.
*/
s/inline/__inline/
2004-12-31 21:30:42 +00:00
static __inline int
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
ieee80211_anyhdrsize(const void *data)
{
const struct ieee80211_frame *wh = data;
if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) {
switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
case IEEE80211_FC0_SUBTYPE_CTS:
case IEEE80211_FC0_SUBTYPE_ACK:
return sizeof(struct ieee80211_frame_ack);
}
return sizeof(struct ieee80211_frame_min);
} else
return ieee80211_hdrsize(data);
}
/*
* Template for an in-kernel authenticator. Authenticators
* register with the protocol code and are typically loaded
* as separate modules as needed.
*/
struct ieee80211_authenticator {
const char *ia_name; /* printable name */
int (*ia_attach)(struct ieee80211com *);
void (*ia_detach)(struct ieee80211com *);
void (*ia_node_join)(struct ieee80211com *,
struct ieee80211_node *);
void (*ia_node_leave)(struct ieee80211com *,
struct ieee80211_node *);
};
extern void ieee80211_authenticator_register(int type,
const struct ieee80211_authenticator *);
extern void ieee80211_authenticator_unregister(int type);
extern const struct ieee80211_authenticator *
ieee80211_authenticator_get(int auth);
/*
* Template for an MAC ACL policy module. Such modules
* register with the protocol code and are passed the sender's
* address of each received frame for validation.
*/
struct ieee80211_aclator {
const char *iac_name; /* printable name */
int (*iac_attach)(struct ieee80211com *);
void (*iac_detach)(struct ieee80211com *);
int (*iac_check)(struct ieee80211com *,
const u_int8_t mac[IEEE80211_ADDR_LEN]);
int (*iac_add)(struct ieee80211com *,
const u_int8_t mac[IEEE80211_ADDR_LEN]);
int (*iac_remove)(struct ieee80211com *,
const u_int8_t mac[IEEE80211_ADDR_LEN]);
int (*iac_flush)(struct ieee80211com *);
int (*iac_setpolicy)(struct ieee80211com *, int);
int (*iac_getpolicy)(struct ieee80211com *);
};
extern void ieee80211_aclator_register(const struct ieee80211_aclator *);
extern void ieee80211_aclator_unregister(const struct ieee80211_aclator *);
extern const struct ieee80211_aclator *ieee80211_aclator_get(const char *name);
/* flags for ieee80211_fix_rate() */
#define IEEE80211_F_DOSORT 0x00000001 /* sort rate list */
#define IEEE80211_F_DOFRATE 0x00000002 /* use fixed rate */
#define IEEE80211_F_DONEGO 0x00000004 /* calc negotiated rate */
#define IEEE80211_F_DODEL 0x00000008 /* delete ignore rate */
extern int ieee80211_fix_rate(struct ieee80211com *,
struct ieee80211_node *, int);
/*
* WME/WMM support.
*/
struct wmeParams {
u_int8_t wmep_acm;
u_int8_t wmep_aifsn;
u_int8_t wmep_logcwmin; /* log2(cwmin) */
u_int8_t wmep_logcwmax; /* log2(cwmax) */
u_int8_t wmep_txopLimit;
u_int8_t wmep_noackPolicy; /* 0 (ack), 1 (no ack) */
};
add macros to convert between txop's and usecs
2005-01-24 20:38:26 +00:00
#define IEEE80211_TXOP_TO_US(_txop) ((_txop)<<5)
#define IEEE80211_US_TO_TXOP(_us) ((_us)>>5)
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
struct chanAccParams {
u_int8_t cap_info; /* version of the current set */
struct wmeParams cap_wmeParams[WME_NUM_AC];
};
struct ieee80211_wme_state {
u_int wme_flags;
#define WME_F_AGGRMODE 0x00000001 /* STATUS: WME agressive mode */
u_int wme_hipri_traffic; /* VI/VO frames in beacon interval */
u_int wme_hipri_switch_thresh;/* agressive mode switch thresh */
u_int wme_hipri_switch_hysteresis;/* agressive mode switch hysteresis */
struct wmeParams wme_params[4]; /* from assoc resp for each AC*/
struct chanAccParams wme_wmeChanParams; /* WME params applied to self */
struct chanAccParams wme_wmeBssChanParams;/* WME params bcast to stations */
struct chanAccParams wme_chanParams; /* params applied to self */
struct chanAccParams wme_bssChanParams; /* params bcast to stations */
int (*wme_update)(struct ieee80211com *);
};
extern void ieee80211_wme_initparams(struct ieee80211com *);
extern void ieee80211_wme_updateparams(struct ieee80211com *);
extern void ieee80211_wme_updateparams_locked(struct ieee80211com *);
o change ieee80211_new_state handling to use a proper method that drivers override in their sub-class; this eliminates the hack of interpreting the EINPROGRESS return value to mean "don't do any of the normal work" o correct active scanning so the first channel is only scanned once and so per-channel passive mode is properly honored o expose 802.11 FSM state names so every driver doesn't keep a private copy o eliminate node parameter to ieee80211_begin_scan; it was not being used
2003-07-20 21:36:08 +00:00
#define ieee80211_new_state(_ic, _nstate, _arg) \
(((_ic)->ic_newstate)((_ic), (_nstate), (_arg)))
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
extern void ieee80211_print_essid(const u_int8_t *, int);
extern void ieee80211_dump_pkt(const u_int8_t *, int, int, int);
o change ieee80211_new_state handling to use a proper method that drivers override in their sub-class; this eliminates the hack of interpreting the EINPROGRESS return value to mean "don't do any of the normal work" o correct active scanning so the first channel is only scanned once and so per-channel passive mode is properly honored o expose 802.11 FSM state names so every driver doesn't keep a private copy o eliminate node parameter to ieee80211_begin_scan; it was not being used
2003-07-20 21:36:08 +00:00
extern const char *ieee80211_state_name[IEEE80211_S_MAX];
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
extern const char *ieee80211_wme_acnames[];
/*
* Beacon frames constructed by ieee80211_beacon_alloc
* have the following structure filled in so drivers
* can update the frame later w/ minimal overhead.
*/
struct ieee80211_beacon_offsets {
u_int16_t *bo_caps; /* capabilities */
u_int8_t *bo_tim; /* start of atim/dtim */
u_int8_t *bo_wme; /* start of WME parameters */
u_int8_t *bo_trailer; /* start of fixed-size trailer */
u_int16_t bo_tim_len; /* atim/dtim length in bytes */
u_int16_t bo_trailer_len; /* trailer length in bytes */
};
extern struct mbuf *ieee80211_beacon_alloc(struct ieee80211com *,
struct ieee80211_node *, struct ieee80211_beacon_offsets *);
extern int ieee80211_beacon_update(struct ieee80211com *,
struct ieee80211_node *, struct ieee80211_beacon_offsets *,
struct mbuf *, int broadcast);
/*
* Notification methods called from the 802.11 state machine.
* Note that while these are defined here, their implementation
* is OS-specific.
*/
extern void ieee80211_notify_node_join(struct ieee80211com *,
struct ieee80211_node *, int newassoc);
extern void ieee80211_notify_node_leave(struct ieee80211com *,
struct ieee80211_node *);
extern void ieee80211_notify_scan_done(struct ieee80211com *);
new 802.11 layer: o code reorg (relative to old netbsd-derived code) for future growth o drivers now specify available channels and rates and 802.11 layer handles almost all ifmedia actions o multi-mode support for 11a/b/g devices o 11g protocol additions (incomplete) o new element id additions (for other than 11g) o node/station table redone for proper locking and to eliminate driver incestuousness o split device flags and capabilities to reduce confusion and provide room for expansion o incomplete power management infrastructure (need to revisit) o incomplete hooks for software retry o more...
2003-06-23 16:55:01 +00:00
#endif /* _NET80211_IEEE80211_PROTO_H_ */
Reference in New Issue Copy Permalink