freebsd-skq/sys/dev/sound/pci/es137x.c

1926 lines
51 KiB
C
Raw Normal View History

/*-
* Support the ENSONIQ AudioPCI board and Creative Labs SoundBlaster PCI
* boards based on the ES1370, ES1371 and ES1373 chips.
*
* Copyright (c) 1999 Russell Cattelan <cattelan@thebarn.com>
2003-09-07 16:28:03 +00:00
* Copyright (c) 1999 Cameron Grant <cg@freebsd.org>
* Copyright (c) 1998 by Joachim Kuebart. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgement:
* This product includes software developed by Joachim Kuebart.
*
* 4. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Part of this code was heavily inspired by the linux driver from
* Thomas Sailer (sailer@ife.ee.ethz.ch)
1999-12-19 17:51:32 +00:00
* Just about everything has been touched and reworked in some way but
* the all the underlying sequences/timing/register values are from
* Thomas' code.
*
*/
#include <dev/sound/pcm/sound.h>
#include <dev/sound/pcm/ac97.h>
#include <dev/sound/pci/es137x.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <sys/sysctl.h>
#include "mixer_if.h"
SND_DECLARE_FILE("$FreeBSD$");
#define MEM_MAP_REG 0x14
/* PCI IDs of supported chips */
#define ES1370_PCI_ID 0x50001274
#define ES1371_PCI_ID 0x13711274
#define ES1371_PCI_ID2 0x13713274
#define CT5880_PCI_ID 0x58801274
#define CT4730_PCI_ID 0x89381102
2001-06-11 00:32:18 +00:00
#define ES1371REV_ES1371_A 0x02
#define ES1371REV_ES1371_B 0x09
#define ES1371REV_ES1373_8 0x08
#define ES1371REV_ES1373_A 0x04
#define ES1371REV_ES1373_B 0x06
#define ES1371REV_CT5880_A 0x07
#define CT5880REV_CT5880_C 0x02
#define CT5880REV_CT5880_D 0x03
#define CT5880REV_CT5880_E 0x04
#define CT4730REV_CT4730_A 0x00
2001-10-08 05:59:54 +00:00
#define ES_DEFAULT_BUFSZ 4096
/* 2 DAC for playback, 1 ADC for record */
#define ES_DAC1 0
#define ES_DAC2 1
#define ES_ADC 2
#define ES_NCHANS 3
#define ES_DMA_SEGS_MIN 2
#define ES_DMA_SEGS_MAX 256
#define ES_BLK_MIN 64
#define ES_BLK_ALIGN (~(ES_BLK_MIN - 1))
#define ES1370_DAC1_MINSPEED 5512
#define ES1370_DAC1_MAXSPEED 44100
/* device private data */
struct es_info;
struct es_chinfo {
struct es_info *parent;
struct pcm_channel *channel;
struct snd_dbuf *buffer;
struct pcmchan_caps caps;
int dir, num, index;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
uint32_t fmt, blksz, blkcnt, bufsz;
uint32_t ptr, prevptr;
int active;
};
/*
* 32bit Ensoniq Configuration (es->escfg).
* ----------------------------------------
*
* +-------+--------+------+------+---------+--------+---------+---------+
* len | 16 | 1 | 1 | 1 | 2 | 2 | 1 | 8 |
* +-------+--------+------+------+---------+--------+---------+---------+
* | fixed | single | | | | | is | general |
* | rate | pcm | DACx | DACy | numplay | numrec | es1370? | purpose |
* | | mixer | | | | | | |
* +-------+--------+------+------+---------+--------+---------+---------+
*/
#define ES_FIXED_RATE(cfgv) \
(((cfgv) & 0xffff0000) >> 16)
#define ES_SET_FIXED_RATE(cfgv, nv) \
(((cfgv) & ~0xffff0000) | (((nv) & 0xffff) << 16))
#define ES_SINGLE_PCM_MIX(cfgv) \
(((cfgv) & 0x8000) >> 15)
#define ES_SET_SINGLE_PCM_MIX(cfgv, nv) \
(((cfgv) & ~0x8000) | (((nv) ? 1 : 0) << 15))
#define ES_DAC_FIRST(cfgv) \
(((cfgv) & 0x4000) >> 14)
#define ES_SET_DAC_FIRST(cfgv, nv) \
(((cfgv) & ~0x4000) | (((nv) & 0x1) << 14))
#define ES_DAC_SECOND(cfgv) \
(((cfgv) & 0x2000) >> 13)
#define ES_SET_DAC_SECOND(cfgv, nv) \
(((cfgv) & ~0x2000) | (((nv) & 0x1) << 13))
#define ES_NUMPLAY(cfgv) \
(((cfgv) & 0x1800) >> 11)
#define ES_SET_NUMPLAY(cfgv, nv) \
(((cfgv) & ~0x1800) | (((nv) & 0x3) << 11))
#define ES_NUMREC(cfgv) \
(((cfgv) & 0x600) >> 9)
#define ES_SET_NUMREC(cfgv, nv) \
(((cfgv) & ~0x600) | (((nv) & 0x3) << 9))
#define ES_IS_ES1370(cfgv) \
(((cfgv) & 0x100) >> 8)
#define ES_SET_IS_ES1370(cfgv, nv) \
(((cfgv) & ~0x100) | (((nv) ? 1 : 0) << 8))
#define ES_GP(cfgv) \
((cfgv) & 0xff)
#define ES_SET_GP(cfgv, nv) \
(((cfgv) & ~0xff) | ((nv) & 0xff))
#define ES_DAC1_ENABLED(cfgv) \
(ES_NUMPLAY(cfgv) > 1 || \
(ES_NUMPLAY(cfgv) == 1 && ES_DAC_FIRST(cfgv) == ES_DAC1))
#define ES_DAC2_ENABLED(cfgv) \
(ES_NUMPLAY(cfgv) > 1 || \
(ES_NUMPLAY(cfgv) == 1 && ES_DAC_FIRST(cfgv) == ES_DAC2))
/*
* DAC 1/2 configuration through kernel hint - hint.pcm.<unit>.dac="val"
*
* 0 = Enable both DACs - Default
* 1 = Enable single DAC (DAC1)
* 2 = Enable single DAC (DAC2)
* 3 = Enable both DACs, swap position (DAC2 comes first instead of DAC1)
*/
#define ES_DEFAULT_DAC_CFG 0
struct es_info {
bus_space_tag_t st;
bus_space_handle_t sh;
bus_dma_tag_t parent_dmat;
struct resource *reg, *irq;
int regtype, regid, irqid;
void *ih;
device_t dev;
1999-12-19 17:51:32 +00:00
int num;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
unsigned int bufsz, blkcnt;
2001-10-08 05:59:54 +00:00
/* Contents of board's registers */
uint32_t ctrl;
uint32_t sctrl;
uint32_t escfg;
struct es_chinfo ch[ES_NCHANS];
struct mtx *lock;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
struct callout poll_timer;
int poll_ticks, polling;
};
#define ES_LOCK(sc) snd_mtxlock((sc)->lock)
#define ES_UNLOCK(sc) snd_mtxunlock((sc)->lock)
#define ES_LOCK_ASSERT(sc) snd_mtxassert((sc)->lock)
1999-12-19 17:51:32 +00:00
/* prototypes */
1999-12-19 17:51:32 +00:00
static void es_intr(void *);
static uint32_t es1371_wait_src_ready(struct es_info *);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static void es1371_src_write(struct es_info *,
unsigned short, unsigned short);
static unsigned int es1371_adc_rate(struct es_info *, unsigned int, int);
static unsigned int es1371_dac_rate(struct es_info *, unsigned int, int);
static int es1371_init(struct es_info *);
1999-12-19 17:51:32 +00:00
static int es1370_init(struct es_info *);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static int es1370_wrcodec(struct es_info *, unsigned char, unsigned char);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static uint32_t es_fmt[] = {
AFMT_U8,
AFMT_STEREO | AFMT_U8,
AFMT_S16_LE,
AFMT_STEREO | AFMT_S16_LE,
0
};
static struct pcmchan_caps es_caps = {4000, 48000, es_fmt, 0};
static const struct {
unsigned volidx:4;
unsigned left:4;
unsigned right:4;
unsigned stereo:1;
unsigned recmask:13;
unsigned avail:1;
} mixtable[SOUND_MIXER_NRDEVICES] = {
[SOUND_MIXER_VOLUME] = { 0, 0x0, 0x1, 1, 0x1f7f, 1 },
[SOUND_MIXER_PCM] = { 1, 0x2, 0x3, 1, 0x0400, 1 },
[SOUND_MIXER_SYNTH] = { 2, 0x4, 0x5, 1, 0x0060, 1 },
[SOUND_MIXER_CD] = { 3, 0x6, 0x7, 1, 0x0006, 1 },
[SOUND_MIXER_LINE] = { 4, 0x8, 0x9, 1, 0x0018, 1 },
[SOUND_MIXER_LINE1] = { 5, 0xa, 0xb, 1, 0x1800, 1 },
[SOUND_MIXER_LINE2] = { 6, 0xc, 0x0, 0, 0x0100, 1 },
[SOUND_MIXER_LINE3] = { 7, 0xd, 0x0, 0, 0x0200, 1 },
[SOUND_MIXER_MIC] = { 8, 0xe, 0x0, 0, 0x0001, 1 },
1999-12-19 17:51:32 +00:00
[SOUND_MIXER_OGAIN] = { 9, 0xf, 0x0, 0, 0x0000, 1 }
};
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static __inline uint32_t
es_rd(struct es_info *es, int regno, int size)
{
switch (size) {
case 1:
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (bus_space_read_1(es->st, es->sh, regno));
case 2:
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (bus_space_read_2(es->st, es->sh, regno));
case 4:
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (bus_space_read_4(es->st, es->sh, regno));
default:
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0xFFFFFFFF);
}
}
static __inline void
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(struct es_info *es, int regno, uint32_t data, int size)
{
switch (size) {
case 1:
bus_space_write_1(es->st, es->sh, regno, data);
break;
case 2:
bus_space_write_2(es->st, es->sh, regno, data);
break;
case 4:
bus_space_write_4(es->st, es->sh, regno, data);
break;
}
}
/* -------------------------------------------------------------------- */
/* The es1370 mixer interface */
static int
es1370_mixinit(struct snd_mixer *m)
{
struct es_info *es;
int i;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
uint32_t v;
es = mix_getdevinfo(m);
v = 0;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
if (mixtable[i].avail)
v |= (1 << i);
}
/*
* Each DAC1/2 for ES1370 can be controlled independently
* DAC1 = controlled by synth
* DAC2 = controlled by pcm
* This is indeed can confuse user if DAC1 become primary playback
* channel. Try to be smart and combine both if necessary.
*/
if (ES_SINGLE_PCM_MIX(es->escfg))
v &= ~(1 << SOUND_MIXER_SYNTH);
mix_setdevs(m, v);
v = 0;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
if (mixtable[i].recmask)
v |= (1 << i);
}
if (ES_SINGLE_PCM_MIX(es->escfg)) /* ditto */
v &= ~(1 << SOUND_MIXER_SYNTH);
mix_setrecdevs(m, v);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
}
static int
es1370_mixset(struct snd_mixer *m, unsigned dev, unsigned left, unsigned right)
{
struct es_info *es;
int l, r, rl, rr, set_dac1;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (!mixtable[dev].avail)
return (-1);
l = left;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
r = (mixtable[dev].stereo) ? right : l;
if (mixtable[dev].left == 0xf)
rl = (l < 2) ? 0x80 : 7 - (l - 2) / 14;
else
rl = (l < 10) ? 0x80 : 15 - (l - 10) / 6;
es = mix_getdevinfo(m);
ES_LOCK(es);
if (dev == SOUND_MIXER_PCM && (ES_SINGLE_PCM_MIX(es->escfg)) &&
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ES_DAC1_ENABLED(es->escfg))
set_dac1 = 1;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
else
set_dac1 = 0;
if (mixtable[dev].stereo) {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
rr = (r < 10) ? 0x80 : 15 - (r - 10) / 6;
es1370_wrcodec(es, mixtable[dev].right, rr);
if (set_dac1 && mixtable[SOUND_MIXER_SYNTH].stereo)
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1370_wrcodec(es,
mixtable[SOUND_MIXER_SYNTH].right, rr);
}
es1370_wrcodec(es, mixtable[dev].left, rl);
if (set_dac1)
es1370_wrcodec(es, mixtable[SOUND_MIXER_SYNTH].left, rl);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (l | (r << 8));
}
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1370_mixsetrecsrc(struct snd_mixer *m, uint32_t src)
{
struct es_info *es;
int i, j = 0;
es = mix_getdevinfo(m);
if (src == 0) src = 1 << SOUND_MIXER_MIC;
src &= mix_getrecdevs(m);
for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
if ((src & (1 << i)) != 0) j |= mixtable[i].recmask;
ES_LOCK(es);
if ((src & (1 << SOUND_MIXER_PCM)) && ES_SINGLE_PCM_MIX(es->escfg) &&
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ES_DAC1_ENABLED(es->escfg))
j |= mixtable[SOUND_MIXER_SYNTH].recmask;
es1370_wrcodec(es, CODEC_LIMIX1, j & 0x55);
es1370_wrcodec(es, CODEC_RIMIX1, j & 0xaa);
es1370_wrcodec(es, CODEC_LIMIX2, (j >> 8) & 0x17);
es1370_wrcodec(es, CODEC_RIMIX2, (j >> 8) & 0x0f);
es1370_wrcodec(es, CODEC_OMIX1, 0x7f);
es1370_wrcodec(es, CODEC_OMIX2, 0x3f);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (src);
}
static kobj_method_t es1370_mixer_methods[] = {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(mixer_init, es1370_mixinit),
KOBJMETHOD(mixer_set, es1370_mixset),
KOBJMETHOD(mixer_setrecsrc, es1370_mixsetrecsrc),
{ 0, 0 }
};
MIXER_DECLARE(es1370_mixer);
/* -------------------------------------------------------------------- */
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1370_wrcodec(struct es_info *es, unsigned char i, unsigned char data)
{
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
unsigned int t;
ES_LOCK_ASSERT(es);
for (t = 0; t < 0x1000; t++) {
if ((es_rd(es, ES1370_REG_STATUS, 4) &
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
STAT_CSTAT) == 0) {
es_wr(es, ES1370_REG_CODEC,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
((unsigned short)i << CODEC_INDEX_SHIFT) | data, 2);
return (0);
}
DELAY(1);
}
device_printf(es->dev, "%s: timed out\n", __func__);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (-1);
}
/* -------------------------------------------------------------------- */
/* channel interface */
static void *
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
eschan_init(kobj_t obj, void *devinfo, struct snd_dbuf *b,
struct pcm_channel *c, int dir)
{
struct es_info *es = devinfo;
struct es_chinfo *ch;
uint32_t index;
ES_LOCK(es);
if (dir == PCMDIR_PLAY) {
index = ES_GP(es->escfg);
es->escfg = ES_SET_GP(es->escfg, index + 1);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (index == 0)
index = ES_DAC_FIRST(es->escfg);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
else if (index == 1)
index = ES_DAC_SECOND(es->escfg);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
else {
device_printf(es->dev,
"Invalid ES_GP index: %d\n", index);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (NULL);
}
if (!(index == ES_DAC1 || index == ES_DAC2)) {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_printf(es->dev, "Unknown DAC: %d\n", index + 1);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (NULL);
}
if (es->ch[index].channel != NULL) {
device_printf(es->dev, "DAC%d already initialized!\n",
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
index + 1);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (NULL);
}
} else
index = ES_ADC;
ch = &es->ch[index];
ch->index = index;
ch->num = es->num++;
ch->caps = es_caps;
if (ES_IS_ES1370(es->escfg)) {
if (ch->index == ES_DAC1) {
ch->caps.maxspeed = ES1370_DAC1_MAXSPEED;
ch->caps.minspeed = ES1370_DAC1_MINSPEED;
} else {
uint32_t fixed_rate = ES_FIXED_RATE(es->escfg);
if (!(fixed_rate < es_caps.minspeed ||
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
fixed_rate > es_caps.maxspeed)) {
ch->caps.maxspeed = fixed_rate;
ch->caps.minspeed = fixed_rate;
}
}
}
ch->parent = es;
ch->channel = c;
ch->buffer = b;
2001-10-08 05:59:54 +00:00
ch->bufsz = es->bufsz;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ch->blkcnt = es->blkcnt;
ch->blksz = ch->bufsz / ch->blkcnt;
ch->dir = dir;
ES_UNLOCK(es);
if (sndbuf_alloc(ch->buffer, es->parent_dmat, 0, ch->bufsz) != 0)
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (NULL);
ES_LOCK(es);
if (dir == PCMDIR_PLAY) {
if (ch->index == ES_DAC1) {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1370_REG_MEMPAGE,
ES1370_REG_DAC1_FRAMEADR >> 8, 1);
es_wr(es, ES1370_REG_DAC1_FRAMEADR & 0xff,
sndbuf_getbufaddr(ch->buffer), 4);
es_wr(es, ES1370_REG_DAC1_FRAMECNT & 0xff,
(ch->bufsz >> 2) - 1, 4);
} else {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1370_REG_MEMPAGE,
ES1370_REG_DAC2_FRAMEADR >> 8, 1);
es_wr(es, ES1370_REG_DAC2_FRAMEADR & 0xff,
sndbuf_getbufaddr(ch->buffer), 4);
es_wr(es, ES1370_REG_DAC2_FRAMECNT & 0xff,
(ch->bufsz >> 2) - 1, 4);
}
} else {
es_wr(es, ES1370_REG_MEMPAGE, ES1370_REG_ADC_FRAMEADR >> 8, 1);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1370_REG_ADC_FRAMEADR & 0xff,
sndbuf_getbufaddr(ch->buffer), 4);
es_wr(es, ES1370_REG_ADC_FRAMECNT & 0xff,
(ch->bufsz >> 2) - 1, 4);
}
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (ch);
}
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
eschan_setformat(kobj_t obj, void *data, uint32_t format)
{
struct es_chinfo *ch = data;
struct es_info *es = ch->parent;
ES_LOCK(es);
if (ch->dir == PCMDIR_PLAY) {
if (ch->index == ES_DAC1) {
es->sctrl &= ~SCTRL_P1FMT;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (format & AFMT_S16_LE)
es->sctrl |= SCTRL_P1SEB;
if (format & AFMT_STEREO)
es->sctrl |= SCTRL_P1SMB;
} else {
es->sctrl &= ~SCTRL_P2FMT;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (format & AFMT_S16_LE)
es->sctrl |= SCTRL_P2SEB;
if (format & AFMT_STEREO)
es->sctrl |= SCTRL_P2SMB;
}
} else {
es->sctrl &= ~SCTRL_R1FMT;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (format & AFMT_S16_LE)
es->sctrl |= SCTRL_R1SEB;
if (format & AFMT_STEREO)
es->sctrl |= SCTRL_R1SMB;
}
es_wr(es, ES1370_REG_SERIAL_CONTROL, es->sctrl, 4);
ES_UNLOCK(es);
ch->fmt = format;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
}
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
eschan1370_setspeed(kobj_t obj, void *data, uint32_t speed)
{
struct es_chinfo *ch = data;
struct es_info *es = ch->parent;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ES_LOCK(es);
/* Fixed rate , do nothing. */
if (ch->caps.minspeed == ch->caps.maxspeed) {
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (ch->caps.maxspeed);
}
if (speed < ch->caps.minspeed)
speed = ch->caps.minspeed;
if (speed > ch->caps.maxspeed)
speed = ch->caps.maxspeed;
if (ch->index == ES_DAC1) {
/*
* DAC1 does not support continuous rate settings.
* Pick the nearest and use it since FEEDER_RATE will
* do the the proper conversion for us.
*/
es->ctrl &= ~CTRL_WTSRSEL;
if (speed < 8268) {
speed = 5512;
es->ctrl |= 0 << CTRL_SH_WTSRSEL;
} else if (speed < 16537) {
speed = 11025;
es->ctrl |= 1 << CTRL_SH_WTSRSEL;
} else if (speed < 33075) {
speed = 22050;
es->ctrl |= 2 << CTRL_SH_WTSRSEL;
} else {
speed = 44100;
es->ctrl |= 3 << CTRL_SH_WTSRSEL;
}
} else {
es->ctrl &= ~CTRL_PCLKDIV;
es->ctrl |= DAC2_SRTODIV(speed) << CTRL_SH_PCLKDIV;
}
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (speed);
}
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
eschan1371_setspeed(kobj_t obj, void *data, uint32_t speed)
1999-12-19 17:51:32 +00:00
{
struct es_chinfo *ch = data;
struct es_info *es = ch->parent;
uint32_t i;
int delta;
1999-12-19 17:51:32 +00:00
ES_LOCK(es);
if (ch->dir == PCMDIR_PLAY)
i = es1371_dac_rate(es, speed, ch->index); /* play */
else
i = es1371_adc_rate(es, speed, ch->index); /* record */
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
delta = (speed > i) ? (speed - i) : (i - speed);
if (delta < 2)
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (speed);
return (i);
1999-12-19 17:51:32 +00:00
}
static int
eschan_setfragments(kobj_t obj, void *data, uint32_t blksz, uint32_t blkcnt)
{
2000-12-23 22:24:43 +00:00
struct es_chinfo *ch = data;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
struct es_info *es = ch->parent;
blksz &= ES_BLK_ALIGN;
if (blksz > (sndbuf_getmaxsize(ch->buffer) / ES_DMA_SEGS_MIN))
blksz = sndbuf_getmaxsize(ch->buffer) / ES_DMA_SEGS_MIN;
if (blksz < ES_BLK_MIN)
blksz = ES_BLK_MIN;
if (blkcnt > ES_DMA_SEGS_MAX)
blkcnt = ES_DMA_SEGS_MAX;
if (blkcnt < ES_DMA_SEGS_MIN)
blkcnt = ES_DMA_SEGS_MIN;
while ((blksz * blkcnt) > sndbuf_getmaxsize(ch->buffer)) {
if ((blkcnt >> 1) >= ES_DMA_SEGS_MIN)
blkcnt >>= 1;
else if ((blksz >> 1) >= ES_BLK_MIN)
blksz >>= 1;
else
break;
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if ((sndbuf_getblksz(ch->buffer) != blksz ||
sndbuf_getblkcnt(ch->buffer) != blkcnt) &&
sndbuf_resize(ch->buffer, blkcnt, blksz) != 0)
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_printf(es->dev, "%s: failed blksz=%u blkcnt=%u\n",
__func__, blksz, blkcnt);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ch->bufsz = sndbuf_getsize(ch->buffer);
ch->blksz = sndbuf_getblksz(ch->buffer);
ch->blkcnt = sndbuf_getblkcnt(ch->buffer);
return (1);
}
static int
eschan_setblocksize(kobj_t obj, void *data, uint32_t blksz)
{
struct es_chinfo *ch = data;
struct es_info *es = ch->parent;
eschan_setfragments(obj, data, blksz, es->blkcnt);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (ch->blksz);
}
#define es_chan_active(es) ((es)->ch[ES_DAC1].active + \
(es)->ch[ES_DAC2].active + \
(es)->ch[ES_ADC].active)
static __inline int
es_poll_channel(struct es_chinfo *ch)
{
struct es_info *es;
uint32_t sz, delta;
uint32_t reg, ptr;
if (ch == NULL || ch->channel == NULL || ch->active == 0)
return (0);
es = ch->parent;
if (ch->dir == PCMDIR_PLAY) {
if (ch->index == ES_DAC1)
reg = ES1370_REG_DAC1_FRAMECNT;
else
reg = ES1370_REG_DAC2_FRAMECNT;
} else
reg = ES1370_REG_ADC_FRAMECNT;
sz = ch->blksz * ch->blkcnt;
es_wr(es, ES1370_REG_MEMPAGE, reg >> 8, 4);
ptr = es_rd(es, reg & 0x000000ff, 4) >> 16;
ptr <<= 2;
ch->ptr = ptr;
ptr %= sz;
ptr &= ~(ch->blksz - 1);
delta = (sz + ptr - ch->prevptr) % sz;
if (delta < ch->blksz)
return (0);
ch->prevptr = ptr;
return (1);
}
static void
es_poll_callback(void *arg)
{
struct es_info *es = arg;
uint32_t trigger = 0;
int i;
if (es == NULL)
return;
ES_LOCK(es);
if (es->polling == 0 || es_chan_active(es) == 0) {
ES_UNLOCK(es);
return;
}
for (i = 0; i < ES_NCHANS; i++) {
if (es_poll_channel(&es->ch[i]) != 0)
trigger |= 1 << i;
}
/* XXX */
callout_reset(&es->poll_timer, 1/*es->poll_ticks*/,
es_poll_callback, es);
ES_UNLOCK(es);
for (i = 0; i < ES_NCHANS; i++) {
if (trigger & (1 << i))
chn_intr(es->ch[i].channel);
}
}
static int
eschan_trigger(kobj_t obj, void *data, int go)
{
struct es_chinfo *ch = data;
struct es_info *es = ch->parent;
uint32_t cnt, b = 0;
if (!PCMTRIG_COMMON(go))
return 0;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ES_LOCK(es);
2000-12-23 22:24:43 +00:00
cnt = (ch->blksz / sndbuf_getbps(ch->buffer)) - 1;
if (ch->fmt & AFMT_16BIT)
b |= 0x02;
if (ch->fmt & AFMT_STEREO)
b |= 0x01;
if (ch->dir == PCMDIR_PLAY) {
if (go == PCMTRIG_START) {
if (ch->index == ES_DAC1) {
es->ctrl |= CTRL_DAC1_EN;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es->sctrl &= ~(SCTRL_P1LOOPSEL |
SCTRL_P1PAUSE | SCTRL_P1SCTRLD);
if (es->polling == 0)
es->sctrl |= SCTRL_P1INTEN;
else
es->sctrl &= ~SCTRL_P1INTEN;
es->sctrl |= b;
es_wr(es, ES1370_REG_DAC1_SCOUNT, cnt, 4);
/* start at beginning of buffer */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1370_REG_MEMPAGE,
ES1370_REG_DAC1_FRAMECNT >> 8, 4);
es_wr(es, ES1370_REG_DAC1_FRAMECNT & 0xff,
(ch->bufsz >> 2) - 1, 4);
} else {
es->ctrl |= CTRL_DAC2_EN;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es->sctrl &= ~(SCTRL_P2ENDINC | SCTRL_P2STINC |
SCTRL_P2LOOPSEL | SCTRL_P2PAUSE |
SCTRL_P2DACSEN);
if (es->polling == 0)
es->sctrl |= SCTRL_P2INTEN;
else
es->sctrl &= ~SCTRL_P2INTEN;
es->sctrl |= (b << 2) |
((((b >> 1) & 1) + 1) << SCTRL_SH_P2ENDINC);
es_wr(es, ES1370_REG_DAC2_SCOUNT, cnt, 4);
/* start at beginning of buffer */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1370_REG_MEMPAGE,
ES1370_REG_DAC2_FRAMECNT >> 8, 4);
es_wr(es, ES1370_REG_DAC2_FRAMECNT & 0xff,
(ch->bufsz >> 2) - 1, 4);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
} else
es->ctrl &= ~((ch->index == ES_DAC1) ?
CTRL_DAC1_EN : CTRL_DAC2_EN);
} else {
if (go == PCMTRIG_START) {
es->ctrl |= CTRL_ADC_EN;
es->sctrl &= ~SCTRL_R1LOOPSEL;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (es->polling == 0)
es->sctrl |= SCTRL_R1INTEN;
else
es->sctrl &= ~SCTRL_R1INTEN;
es->sctrl |= b << 4;
es_wr(es, ES1370_REG_ADC_SCOUNT, cnt, 4);
/* start at beginning of buffer */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1370_REG_MEMPAGE,
ES1370_REG_ADC_FRAMECNT >> 8, 4);
es_wr(es, ES1370_REG_ADC_FRAMECNT & 0xff,
(ch->bufsz >> 2) - 1, 4);
} else
es->ctrl &= ~CTRL_ADC_EN;
}
es_wr(es, ES1370_REG_SERIAL_CONTROL, es->sctrl, 4);
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (go == PCMTRIG_START) {
if (es->polling != 0) {
ch->ptr = 0;
ch->prevptr = 0;
if (es_chan_active(es) == 0) {
es->poll_ticks = 1;
callout_reset(&es->poll_timer, 1,
es_poll_callback, es);
}
}
ch->active = 1;
} else {
ch->active = 0;
if (es->polling != 0) {
if (es_chan_active(es) == 0) {
callout_stop(&es->poll_timer);
es->poll_ticks = 1;
}
}
}
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
}
static int
eschan_getptr(kobj_t obj, void *data)
{
struct es_chinfo *ch = data;
struct es_info *es = ch->parent;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
uint32_t reg, cnt;
ES_LOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (es->polling != 0)
cnt = ch->ptr;
else {
if (ch->dir == PCMDIR_PLAY) {
if (ch->index == ES_DAC1)
reg = ES1370_REG_DAC1_FRAMECNT;
else
reg = ES1370_REG_DAC2_FRAMECNT;
} else
reg = ES1370_REG_ADC_FRAMECNT;
es_wr(es, ES1370_REG_MEMPAGE, reg >> 8, 4);
cnt = es_rd(es, reg & 0x000000ff, 4) >> 16;
/* cnt is longwords */
cnt <<= 2;
}
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
cnt &= ES_BLK_ALIGN;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (cnt);
}
static struct pcmchan_caps *
eschan_getcaps(kobj_t obj, void *data)
{
struct es_chinfo *ch = data;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (&ch->caps);
}
static kobj_method_t eschan1370_methods[] = {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(channel_init, eschan_init),
KOBJMETHOD(channel_setformat, eschan_setformat),
KOBJMETHOD(channel_setspeed, eschan1370_setspeed),
KOBJMETHOD(channel_setblocksize, eschan_setblocksize),
KOBJMETHOD(channel_setfragments, eschan_setfragments),
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(channel_trigger, eschan_trigger),
KOBJMETHOD(channel_getptr, eschan_getptr),
KOBJMETHOD(channel_getcaps, eschan_getcaps),
{ 0, 0 }
};
CHANNEL_DECLARE(eschan1370);
static kobj_method_t eschan1371_methods[] = {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(channel_init, eschan_init),
KOBJMETHOD(channel_setformat, eschan_setformat),
KOBJMETHOD(channel_setspeed, eschan1371_setspeed),
KOBJMETHOD(channel_setblocksize, eschan_setblocksize),
KOBJMETHOD(channel_setfragments, eschan_setfragments),
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(channel_trigger, eschan_trigger),
KOBJMETHOD(channel_getptr, eschan_getptr),
KOBJMETHOD(channel_getcaps, eschan_getcaps),
{ 0, 0 }
};
CHANNEL_DECLARE(eschan1371);
/* -------------------------------------------------------------------- */
/* The interrupt handler */
static void
1999-12-19 17:51:32 +00:00
es_intr(void *p)
{
struct es_info *es = p;
uint32_t intsrc, sctrl;
ES_LOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (es->polling != 0) {
ES_UNLOCK(es);
return;
}
intsrc = es_rd(es, ES1370_REG_STATUS, 4);
if ((intsrc & STAT_INTR) == 0) {
ES_UNLOCK(es);
return;
}
sctrl = es->sctrl;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (intsrc & STAT_ADC)
sctrl &= ~SCTRL_R1INTEN;
if (intsrc & STAT_DAC1)
sctrl &= ~SCTRL_P1INTEN;
if (intsrc & STAT_DAC2)
sctrl &= ~SCTRL_P2INTEN;
es_wr(es, ES1370_REG_SERIAL_CONTROL, sctrl, 4);
es_wr(es, ES1370_REG_SERIAL_CONTROL, es->sctrl, 4);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (intsrc & STAT_ADC)
chn_intr(es->ch[ES_ADC].channel);
if (intsrc & STAT_DAC1)
chn_intr(es->ch[ES_DAC1].channel);
if (intsrc & STAT_DAC2)
chn_intr(es->ch[ES_DAC2].channel);
}
1999-12-19 17:51:32 +00:00
/* ES1370 specific */
static int
es1370_init(struct es_info *es)
{
uint32_t fixed_rate;
int r, single_pcm;
/* ES1370 default to fixed rate operation */
if (resource_int_value(device_get_name(es->dev),
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_get_unit(es->dev), "fixed_rate", &r) == 0) {
fixed_rate = r;
if (fixed_rate) {
if (fixed_rate < es_caps.minspeed)
fixed_rate = es_caps.minspeed;
if (fixed_rate > es_caps.maxspeed)
fixed_rate = es_caps.maxspeed;
}
} else
fixed_rate = es_caps.maxspeed;
if (resource_int_value(device_get_name(es->dev),
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_get_unit(es->dev), "single_pcm_mixer", &r) == 0)
single_pcm = (r != 0) ? 1 : 0;
else
single_pcm = 1;
ES_LOCK(es);
if (ES_NUMPLAY(es->escfg) == 1)
single_pcm = 1;
/* This is ES1370 */
es->escfg = ES_SET_IS_ES1370(es->escfg, 1);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (fixed_rate)
es->escfg = ES_SET_FIXED_RATE(es->escfg, fixed_rate);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
else {
es->escfg = ES_SET_FIXED_RATE(es->escfg, 0);
fixed_rate = DSP_DEFAULT_SPEED;
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (single_pcm)
es->escfg = ES_SET_SINGLE_PCM_MIX(es->escfg, 1);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
else
es->escfg = ES_SET_SINGLE_PCM_MIX(es->escfg, 0);
es->ctrl = CTRL_CDC_EN | CTRL_JYSTK_EN | CTRL_SERR_DIS |
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
(DAC2_SRTODIV(fixed_rate) << CTRL_SH_PCLKDIV);
es->ctrl |= 3 << CTRL_SH_WTSRSEL;
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
1999-12-19 17:51:32 +00:00
es->sctrl = 0;
es_wr(es, ES1370_REG_SERIAL_CONTROL, es->sctrl, 4);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
/* No RST, PD */
es1370_wrcodec(es, CODEC_RES_PD, 3);
/*
* CODEC ADC and CODEC DAC use {LR,B}CLK2 and run off the LRCLK2 PLL;
* program DAC_SYNC=0!
*/
es1370_wrcodec(es, CODEC_CSEL, 0);
/* Recording source is mixer */
es1370_wrcodec(es, CODEC_ADSEL, 0);
/* MIC amp is 0db */
es1370_wrcodec(es, CODEC_MGAIN, 0);
ES_UNLOCK(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
1999-12-19 17:51:32 +00:00
}
1999-12-19 17:51:32 +00:00
/* ES1371 specific */
int
es1371_init(struct es_info *es)
{
uint32_t cssr, devid, revid, subdev;
int idx;
ES_LOCK(es);
/* This is NOT ES1370 */
es->escfg = ES_SET_IS_ES1370(es->escfg, 0);
1999-12-19 17:51:32 +00:00
es->num = 0;
es->sctrl = 0;
cssr = 0;
devid = pci_get_devid(es->dev);
revid = pci_get_revid(es->dev);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
subdev = (pci_get_subdevice(es->dev) << 16) |
pci_get_subvendor(es->dev);
/*
* Joyport blacklist. Either we're facing with broken hardware
* or because this hardware need special (unknown) initialization
* procedures.
*/
switch (subdev) {
case 0x20001274: /* old Ensoniq */
es->ctrl = 0;
break;
default:
es->ctrl = CTRL_JYSTK_EN;
break;
}
if (devid == CT4730_PCI_ID) {
/* XXX amplifier hack? */
es->ctrl |= (1 << 16);
}
/* initialize the chips */
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
es_wr(es, ES1370_REG_SERIAL_CONTROL, es->sctrl, 4);
es_wr(es, ES1371_REG_LEGACY, 0, 4);
if ((devid == ES1371_PCI_ID && revid == ES1371REV_ES1373_8) ||
(devid == ES1371_PCI_ID && revid == ES1371REV_CT5880_A) ||
(devid == CT5880_PCI_ID && revid == CT5880REV_CT5880_C) ||
(devid == CT5880_PCI_ID && revid == CT5880REV_CT5880_D) ||
(devid == CT5880_PCI_ID && revid == CT5880REV_CT5880_E)) {
cssr = 1 << 29;
es_wr(es, ES1370_REG_STATUS, cssr, 4);
DELAY(20000);
}
/* AC'97 warm reset to start the bitclk */
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
es_wr(es, ES1371_REG_LEGACY, ES1371_SYNC_RES, 4);
DELAY(2000);
es_wr(es, ES1370_REG_CONTROL, es->sctrl, 4);
es1371_wait_src_ready(es);
/* Init the sample rate converter */
es_wr(es, ES1371_REG_SMPRATE, ES1371_DIS_SRC, 4);
for (idx = 0; idx < 0x80; idx++)
1999-12-19 17:51:32 +00:00
es1371_src_write(es, idx, 0);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1371_src_write(es, ES_SMPREG_DAC1 + ES_SMPREG_TRUNC_N, 16 << 4);
es1371_src_write(es, ES_SMPREG_DAC1 + ES_SMPREG_INT_REGS, 16 << 10);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1371_src_write(es, ES_SMPREG_DAC2 + ES_SMPREG_TRUNC_N, 16 << 4);
es1371_src_write(es, ES_SMPREG_DAC2 + ES_SMPREG_INT_REGS, 16 << 10);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1371_src_write(es, ES_SMPREG_VOL_ADC, 1 << 12);
es1371_src_write(es, ES_SMPREG_VOL_ADC + 1, 1 << 12);
es1371_src_write(es, ES_SMPREG_VOL_DAC1, 1 << 12);
es1371_src_write(es, ES_SMPREG_VOL_DAC1 + 1, 1 << 12);
es1371_src_write(es, ES_SMPREG_VOL_DAC2, 1 << 12);
es1371_src_write(es, ES_SMPREG_VOL_DAC2 + 1, 1 << 12);
es1371_adc_rate(es, 22050, ES_ADC);
es1371_dac_rate(es, 22050, ES_DAC1);
es1371_dac_rate(es, 22050, ES_DAC2);
/*
* WARNING:
* enabling the sample rate converter without properly programming
* its parameters causes the chip to lock up (the SRC busy bit will
* be stuck high, and I've found no way to rectify this other than
* power cycle)
*/
es1371_wait_src_ready(es);
es_wr(es, ES1371_REG_SMPRATE, 0, 4);
/* try to reset codec directly */
es_wr(es, ES1371_REG_CODEC, 0, 4);
es_wr(es, ES1370_REG_STATUS, cssr, 4);
ES_UNLOCK(es);
return (0);
}
/* -------------------------------------------------------------------- */
static int
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1371_wrcd(kobj_t obj, void *s, int addr, uint32_t data)
{
uint32_t t, x, orig;
struct es_info *es = (struct es_info*)s;
for (t = 0; t < 0x1000; t++) {
if (!es_rd(es, ES1371_REG_CODEC & CODEC_WIP, 4))
break;
}
/* save the current state for later */
x = orig = es_rd(es, ES1371_REG_SMPRATE, 4);
/* enable SRC state data in SRC mux */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1371_REG_SMPRATE, (x & (ES1371_DIS_SRC | ES1371_DIS_P1 |
ES1371_DIS_P2 | ES1371_DIS_R1)) | 0x00010000, 4);
/* busy wait */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (t = 0; t < 0x1000; t++) {
if ((es_rd(es, ES1371_REG_SMPRATE, 4) & 0x00870000) ==
0x00000000)
break;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
/* wait for a SAFE time to write addr/data and then do it, dammit */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (t = 0; t < 0x1000; t++) {
if ((es_rd(es, ES1371_REG_SMPRATE, 4) & 0x00870000) ==
0x00010000)
1999-12-19 17:51:32 +00:00
break;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
1999-12-19 17:51:32 +00:00
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1371_REG_CODEC, ((addr << CODEC_POADD_SHIFT) &
CODEC_POADD_MASK) | ((data << CODEC_PODAT_SHIFT) &
CODEC_PODAT_MASK), 4);
/* restore SRC reg */
es1371_wait_src_ready(s);
es_wr(es, ES1371_REG_SMPRATE, orig, 4);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
}
static int
es1371_rdcd(kobj_t obj, void *s, int addr)
{
uint32_t t, x, orig;
1999-12-19 17:51:32 +00:00
struct es_info *es = (struct es_info *)s;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (t = 0; t < 0x1000; t++) {
if (!(x = es_rd(es, ES1371_REG_CODEC, 4) & CODEC_WIP))
1999-12-19 17:51:32 +00:00
break;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
1999-12-19 17:51:32 +00:00
/* save the current state for later */
x = orig = es_rd(es, ES1371_REG_SMPRATE, 4);
1999-12-19 17:51:32 +00:00
/* enable SRC state data in SRC mux */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1371_REG_SMPRATE, (x & (ES1371_DIS_SRC | ES1371_DIS_P1 |
ES1371_DIS_P2 | ES1371_DIS_R1)) | 0x00010000, 4);
/* busy wait */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (t = 0; t < 0x1000; t++) {
if ((x = es_rd(es, ES1371_REG_SMPRATE, 4) & 0x00870000) ==
0x00000000)
break;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
1999-12-19 17:51:32 +00:00
/* wait for a SAFE time to write addr/data and then do it, dammit */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (t = 0; t < 0x1000; t++) {
if ((x = es_rd(es, ES1371_REG_SMPRATE, 4) & 0x00870000) ==
0x00010000)
1999-12-19 17:51:32 +00:00
break;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es_wr(es, ES1371_REG_CODEC, ((addr << CODEC_POADD_SHIFT) &
CODEC_POADD_MASK) | CODEC_PORD, 4);
1999-12-19 17:51:32 +00:00
/* restore SRC reg */
es1371_wait_src_ready(s);
es_wr(es, ES1371_REG_SMPRATE, orig, 4);
1999-12-19 17:51:32 +00:00
/* now wait for the stinkin' data (RDY) */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
for (t = 0; t < 0x1000; t++) {
if ((x = es_rd(es, ES1371_REG_CODEC, 4)) & CODEC_RDY)
1999-12-19 17:51:32 +00:00
break;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
}
1999-12-19 17:51:32 +00:00
return ((x & CODEC_PIDAT_MASK) >> CODEC_PIDAT_SHIFT);
}
static kobj_method_t es1371_ac97_methods[] = {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
KOBJMETHOD(ac97_read, es1371_rdcd),
KOBJMETHOD(ac97_write, es1371_wrcd),
{ 0, 0 }
};
AC97_DECLARE(es1371_ac97);
/* -------------------------------------------------------------------- */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static unsigned int
es1371_src_read(struct es_info *es, unsigned short reg)
1999-12-19 17:51:32 +00:00
{
uint32_t r;
1999-12-19 17:51:32 +00:00
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
r = es1371_wait_src_ready(es) & (ES1371_DIS_SRC | ES1371_DIS_P1 |
ES1371_DIS_P2 | ES1371_DIS_R1);
1999-12-19 17:51:32 +00:00
r |= ES1371_SRC_RAM_ADDRO(reg);
es_wr(es, ES1371_REG_SMPRATE, r, 4);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (ES1371_SRC_RAM_DATAI(es1371_wait_src_ready(es)));
}
static void
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es1371_src_write(struct es_info *es, unsigned short reg, unsigned short data)
{
uint32_t r;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
r = es1371_wait_src_ready(es) & (ES1371_DIS_SRC | ES1371_DIS_P1 |
ES1371_DIS_P2 | ES1371_DIS_R1);
r |= ES1371_SRC_RAM_ADDRO(reg) | ES1371_SRC_RAM_DATAO(data);
es_wr(es, ES1371_REG_SMPRATE, r | ES1371_SRC_RAM_WE, 4);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static unsigned int
es1371_adc_rate(struct es_info *es, unsigned int rate, int set)
1999-12-19 17:51:32 +00:00
{
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
unsigned int n, truncm, freq, result;
1999-12-19 17:51:32 +00:00
ES_LOCK_ASSERT(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (rate > 48000)
rate = 48000;
if (rate < 4000)
rate = 4000;
1999-12-19 17:51:32 +00:00
n = rate / 3000;
if ((1 << n) & ((1 << 15) | (1 << 13) | (1 << 11) | (1 << 9)))
n--;
truncm = (21 * n - 1) | 1;
freq = ((48000UL << 15) / rate) * n;
result = (48000UL << 15) / (freq / n);
if (set) {
if (rate >= 24000) {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (truncm > 239)
truncm = 239;
1999-12-19 17:51:32 +00:00
es1371_src_write(es, ES_SMPREG_ADC + ES_SMPREG_TRUNC_N,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
(((239 - truncm) >> 1) << 9) | (n << 4));
1999-12-19 17:51:32 +00:00
} else {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (truncm > 119)
truncm = 119;
1999-12-19 17:51:32 +00:00
es1371_src_write(es, ES_SMPREG_ADC + ES_SMPREG_TRUNC_N,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
0x8000 | (((119 - truncm) >> 1) << 9) | (n << 4));
1999-12-19 17:51:32 +00:00
}
es1371_src_write(es, ES_SMPREG_ADC + ES_SMPREG_INT_REGS,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
(es1371_src_read(es, ES_SMPREG_ADC + ES_SMPREG_INT_REGS) &
0x00ff) | ((freq >> 5) & 0xfc00));
es1371_src_write(es, ES_SMPREG_ADC + ES_SMPREG_VFREQ_FRAC,
freq & 0x7fff);
1999-12-19 17:51:32 +00:00
es1371_src_write(es, ES_SMPREG_VOL_ADC, n << 8);
es1371_src_write(es, ES_SMPREG_VOL_ADC + 1, n << 8);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (result);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static unsigned int
es1371_dac_rate(struct es_info *es, unsigned int rate, int set)
1999-12-19 17:51:32 +00:00
{
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
unsigned int freq, r, result, dac, dis;
1999-12-19 17:51:32 +00:00
ES_LOCK_ASSERT(es);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (rate > 48000)
rate = 48000;
if (rate < 4000)
rate = 4000;
freq = ((rate << 15) + 1500) / 3000;
1999-12-19 17:51:32 +00:00
result = (freq * 3000) >> 15;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
dac = (set == ES_DAC1) ? ES_SMPREG_DAC1 : ES_SMPREG_DAC2;
dis = (set == ES_DAC1) ? ES1371_DIS_P2 : ES1371_DIS_P1;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
r = (es1371_wait_src_ready(es) & (ES1371_DIS_SRC | ES1371_DIS_P1 |
ES1371_DIS_P2 | ES1371_DIS_R1));
es_wr(es, ES1371_REG_SMPRATE, r, 4);
es1371_src_write(es, dac + ES_SMPREG_INT_REGS,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
(es1371_src_read(es, dac + ES_SMPREG_INT_REGS) & 0x00ff) |
((freq >> 5) & 0xfc00));
es1371_src_write(es, dac + ES_SMPREG_VFREQ_FRAC, freq & 0x7fff);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
r = (es1371_wait_src_ready(es) &
(ES1371_DIS_SRC | dis | ES1371_DIS_R1));
es_wr(es, ES1371_REG_SMPRATE, r, 4);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (result);
}
static uint32_t
es1371_wait_src_ready(struct es_info *es)
{
uint32_t t, r;
for (t = 0; t < 0x1000; t++) {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (!((r = es_rd(es, ES1371_REG_SMPRATE, 4)) &
ES1371_SRC_RAM_BUSY))
return (r);
DELAY(1);
1999-12-19 17:51:32 +00:00
}
device_printf(es->dev, "%s: timed out 0x%x [0x%x]\n", __func__,
ES1371_REG_SMPRATE, r);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
1999-12-19 17:51:32 +00:00
}
/* -------------------------------------------------------------------- */
/*
* Probe and attach the card
*/
static int
es_pci_probe(device_t dev)
{
switch(pci_get_devid(dev)) {
case ES1370_PCI_ID:
device_set_desc(dev, "AudioPCI ES1370");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case ES1371_PCI_ID:
switch(pci_get_revid(dev)) {
2001-06-11 00:32:18 +00:00
case ES1371REV_ES1371_A:
device_set_desc(dev, "AudioPCI ES1371-A");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case ES1371REV_ES1371_B:
device_set_desc(dev, "AudioPCI ES1371-B");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case ES1371REV_ES1373_A:
device_set_desc(dev, "AudioPCI ES1373-A");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case ES1371REV_ES1373_B:
device_set_desc(dev, "AudioPCI ES1373-B");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case ES1371REV_ES1373_8:
device_set_desc(dev, "AudioPCI ES1373-8");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case ES1371REV_CT5880_A:
device_set_desc(dev, "Creative CT5880-A");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
default:
device_set_desc(dev, "AudioPCI ES1371-?");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_printf(dev,
"unknown revision %d -- please report to "
"freebsd-multimedia@freebsd.org\n",
pci_get_revid(dev));
return (BUS_PROBE_DEFAULT);
}
case ES1371_PCI_ID2:
2001-06-11 00:32:18 +00:00
device_set_desc(dev, "Strange AudioPCI ES1371-? (vid=3274)");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_printf(dev,
"unknown revision %d -- please report to "
"freebsd-multimedia@freebsd.org\n", pci_get_revid(dev));
return (BUS_PROBE_DEFAULT);
case CT4730_PCI_ID:
switch(pci_get_revid(dev)) {
case CT4730REV_CT4730_A:
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_set_desc(dev,
"Creative SB AudioPCI CT4730/EV1938");
return (BUS_PROBE_DEFAULT);
default:
device_set_desc(dev, "Creative SB AudioPCI CT4730-?");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_printf(dev,
"unknown revision %d -- please report to "
"freebsd-multimedia@freebsd.org\n",
pci_get_revid(dev));
return (BUS_PROBE_DEFAULT);
}
case CT5880_PCI_ID:
switch(pci_get_revid(dev)) {
case CT5880REV_CT5880_C:
device_set_desc(dev, "Creative CT5880-C");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case CT5880REV_CT5880_D:
device_set_desc(dev, "Creative CT5880-D");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
case CT5880REV_CT5880_E:
device_set_desc(dev, "Creative CT5880-E");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (BUS_PROBE_DEFAULT);
default:
device_set_desc(dev, "Creative CT5880-?");
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_printf(dev,
"unknown revision %d -- please report to "
"freebsd-multimedia@freebsd.org\n",
pci_get_revid(dev));
return (BUS_PROBE_DEFAULT);
}
default:
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (ENXIO);
}
}
#ifdef SND_DYNSYSCTL
static int
sysctl_es137x_spdif_enable(SYSCTL_HANDLER_ARGS)
{
struct es_info *es;
device_t dev;
uint32_t r;
int err, new_en;
dev = oidp->oid_arg1;
es = pcm_getdevinfo(dev);
ES_LOCK(es);
r = es_rd(es, ES1370_REG_STATUS, 4);
ES_UNLOCK(es);
new_en = (r & ENABLE_SPDIF) ? 1 : 0;
err = sysctl_handle_int(oidp, &new_en, 0, req);
if (err || req->newptr == NULL)
return (err);
if (new_en < 0 || new_en > 1)
return (EINVAL);
ES_LOCK(es);
if (new_en) {
r |= ENABLE_SPDIF;
es->ctrl |= SPDIFEN_B;
es->ctrl |= RECEN_B;
} else {
r &= ~ENABLE_SPDIF;
es->ctrl &= ~SPDIFEN_B;
es->ctrl &= ~RECEN_B;
}
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
es_wr(es, ES1370_REG_STATUS, r, 4);
ES_UNLOCK(es);
return (0);
}
static int
sysctl_es137x_latency_timer(SYSCTL_HANDLER_ARGS)
{
struct es_info *es;
device_t dev;
uint32_t val;
int err;
dev = oidp->oid_arg1;
es = pcm_getdevinfo(dev);
ES_LOCK(es);
val = pci_read_config(dev, PCIR_LATTIMER, 1);
ES_UNLOCK(es);
err = sysctl_handle_int(oidp, &val, 0, req);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (err || req->newptr == NULL)
return (err);
if (val > 255)
return (EINVAL);
ES_LOCK(es);
pci_write_config(dev, PCIR_LATTIMER, val, 1);
ES_UNLOCK(es);
return (0);
}
static int
sysctl_es137x_fixed_rate(SYSCTL_HANDLER_ARGS)
{
struct es_info *es;
device_t dev;
uint32_t val;
int err;
dev = oidp->oid_arg1;
es = pcm_getdevinfo(dev);
ES_LOCK(es);
val = ES_FIXED_RATE(es->escfg);
if (val < es_caps.minspeed)
val = 0;
ES_UNLOCK(es);
err = sysctl_handle_int(oidp, &val, 0, req);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (err || req->newptr == NULL)
return (err);
if (val != 0 && (val < es_caps.minspeed || val > es_caps.maxspeed))
return (EINVAL);
ES_LOCK(es);
if (es->ctrl & (CTRL_DAC2_EN|CTRL_ADC_EN)) {
ES_UNLOCK(es);
return (EBUSY);
}
if (val) {
if (val != ES_FIXED_RATE(es->escfg)) {
es->escfg = ES_SET_FIXED_RATE(es->escfg, val);
es->ch[ES_DAC2].caps.maxspeed = val;
es->ch[ES_DAC2].caps.minspeed = val;
es->ch[ES_ADC].caps.maxspeed = val;
es->ch[ES_ADC].caps.minspeed = val;
es->ctrl &= ~CTRL_PCLKDIV;
es->ctrl |= DAC2_SRTODIV(val) << CTRL_SH_PCLKDIV;
es_wr(es, ES1370_REG_CONTROL, es->ctrl, 4);
}
} else {
es->escfg = ES_SET_FIXED_RATE(es->escfg, 0);
es->ch[ES_DAC2].caps = es_caps;
es->ch[ES_ADC].caps = es_caps;
}
ES_UNLOCK(es);
return (0);
}
static int
sysctl_es137x_single_pcm_mixer(SYSCTL_HANDLER_ARGS)
{
struct es_info *es;
struct snddev_info *d;
struct snd_mixer *m;
device_t dev;
uint32_t val, set;
int recsrc, level, err;
dev = oidp->oid_arg1;
d = device_get_softc(dev);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
if (!PCM_REGISTERED(d) || d->mixer_dev == NULL ||
d->mixer_dev->si_drv1 == NULL)
return (EINVAL);
es = d->devinfo;
if (es == NULL)
return (EINVAL);
ES_LOCK(es);
set = ES_SINGLE_PCM_MIX(es->escfg);
val = set;
ES_UNLOCK(es);
err = sysctl_handle_int(oidp, &val, 0, req);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (err || req->newptr == NULL)
return (err);
if (!(val == 0 || val == 1))
return (EINVAL);
if (val == set)
return (0);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_ACQUIRE_QUICK(d);
m = (d->mixer_dev != NULL) ? d->mixer_dev->si_drv1 : NULL;
if (m == NULL) {
PCM_RELEASE_QUICK(d);
return (ENODEV);
}
if (mixer_busy(m) != 0) {
PCM_RELEASE_QUICK(d);
return (EBUSY);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
}
level = mix_get(m, SOUND_MIXER_PCM);
recsrc = mix_getrecsrc(m);
if (level < 0 || recsrc < 0) {
PCM_RELEASE_QUICK(d);
return (ENXIO);
}
ES_LOCK(es);
if (es->ctrl & (CTRL_ADC_EN | CTRL_DAC1_EN | CTRL_DAC2_EN)) {
ES_UNLOCK(es);
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_RELEASE_QUICK(d);
return (EBUSY);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (val)
es->escfg = ES_SET_SINGLE_PCM_MIX(es->escfg, 1);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
else
es->escfg = ES_SET_SINGLE_PCM_MIX(es->escfg, 0);
ES_UNLOCK(es);
if (!val) {
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
mix_setdevs(m, mix_getdevs(m) | (1 << SOUND_MIXER_SYNTH));
mix_setrecdevs(m, mix_getrecdevs(m) | (1 << SOUND_MIXER_SYNTH));
err = mix_set(m, SOUND_MIXER_SYNTH, level & 0x7f,
(level >> 8) & 0x7f);
} else {
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
err = mix_set(m, SOUND_MIXER_SYNTH, level & 0x7f,
(level >> 8) & 0x7f);
mix_setdevs(m, mix_getdevs(m) & ~(1 << SOUND_MIXER_SYNTH));
mix_setrecdevs(m, mix_getrecdevs(m) &
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
~(1 << SOUND_MIXER_SYNTH));
}
if (!err) {
level = recsrc;
if (recsrc & (1 << SOUND_MIXER_PCM))
recsrc |= 1 << SOUND_MIXER_SYNTH;
else if (recsrc & (1 << SOUND_MIXER_SYNTH))
recsrc |= 1 << SOUND_MIXER_PCM;
if (level != recsrc)
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
err = mix_setrecsrc(m, recsrc);
}
Last (again ?!?) major commit for RELENG_7, featuring total Giant eradication in/from userland path, countless locking fixes, etc. - General sleep call through msleep(9) has been converted to condvar(9) with better consistencies. - Heavily guard every possible "slow path" entries (open(), close(), few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt started), they are free to fly on their own. - Rearrange locking sequences, resulting better concurrency and serialization. Large part doesn't even need locking at all, and will be removed in future. Less clutter, except in few places due to lock ordering. - Anonymous mixer object creation/deletion to simplify mixer handling beyond typical mixer ioctls. Submitted by: chibis (with modifications) - Add few mix_[get|set|..] functions to avoid calling mixer_ioctl() directly using cryptic arguments. - Locking fixes to avoid possible deadlock with (still under Giant) USB. - Better simplex/duplex device handling. - Recover mmap() functionality for recording, which has been lost since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still doesn't work (due to VM/page design), but people still can mmap both by opening each direction separately. mmaped playback is guarantee to work either way. - New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page mapping, due to recent changes in linux compatibility layer which require it. All linux applications that using sound + mmap() (mostly games) require this to be enabled. Disabled by default. - Other goodies.. too many, that will increase releng7 shareholder value and make users of releng6 (and below) cry ;) * This commit should be atomic. If anything goes wrong (not counting problem originated from elsewhere), I will not hesitate to revert everything back within 12 hours. This substantial changes itself not a rocket science and the process has begun for almost 2 years, and lots of incremental changes are already in place during that period of time. * Some issues does occur in snd_emu10kx (note the 'x') due to various internal locking issues and it is currently being worked on by chibis. Tested by: chibis (Yuriy Tsibizov), joel, Alexandre Vieira, many innocent souls...
2007-06-16 03:37:28 +00:00
PCM_RELEASE_QUICK(d);
return (err);
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
static int
sysctl_es_polling(SYSCTL_HANDLER_ARGS)
{
struct es_info *es;
device_t dev;
int err, val;
dev = oidp->oid_arg1;
es = pcm_getdevinfo(dev);
if (es == NULL)
return (EINVAL);
ES_LOCK(es);
val = es->polling;
ES_UNLOCK(es);
err = sysctl_handle_int(oidp, &val, 0, req);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (err || req->newptr == NULL)
return (err);
if (val < 0 || val > 1)
return (EINVAL);
ES_LOCK(es);
if (val != es->polling) {
if (es_chan_active(es) != 0)
err = EBUSY;
else if (val == 0)
es->polling = 0;
else
es->polling = 1;
}
ES_UNLOCK(es);
return (err);
}
#endif /* SND_DYNSYSCTL */
static void
es_init_sysctls(device_t dev)
{
#ifdef SND_DYNSYSCTL
struct es_info *es;
int r, devid, revid;
devid = pci_get_devid(dev);
revid = pci_get_revid(dev);
es = pcm_getdevinfo(dev);
if ((devid == ES1371_PCI_ID && revid == ES1371REV_ES1373_8) ||
(devid == ES1371_PCI_ID && revid == ES1371REV_CT5880_A) ||
(devid == CT5880_PCI_ID && revid == CT5880REV_CT5880_C) ||
(devid == CT5880_PCI_ID && revid == CT5880REV_CT5880_D) ||
(devid == CT5880_PCI_ID && revid == CT5880REV_CT5880_E)) {
/* XXX: an user should be able to set this with a control tool,
if not done before 7.0-RELEASE, this needs to be converted
to a device specific sysctl "dev.pcm.X.yyy" via
device_get_sysctl_*() as discussed on multimedia@ in msg-id
<861wujij2q.fsf@xps.des.no> */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"spdif_enabled", CTLTYPE_INT | CTLFLAG_RW, dev, sizeof(dev),
sysctl_es137x_spdif_enable, "I",
"Enable S/PDIF output on primary playback channel");
} else if (devid == ES1370_PCI_ID) {
/*
* Enable fixed rate sysctl if both DAC2 / ADC enabled.
*/
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (es->ch[ES_DAC2].channel != NULL &&
es->ch[ES_ADC].channel != NULL) {
/* XXX: an user should be able to set this with a control tool,
if not done before 7.0-RELEASE, this needs to be converted
to a device specific sysctl "dev.pcm.X.yyy" via
device_get_sysctl_*() as discussed on multimedia@ in msg-id
<861wujij2q.fsf@xps.des.no> */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "fixed_rate", CTLTYPE_INT | CTLFLAG_RW,
dev, sizeof(dev), sysctl_es137x_fixed_rate, "I",
"Enable fixed rate playback/recording");
}
/*
* Enable single pcm mixer sysctl if both DAC1/2 enabled.
*/
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (es->ch[ES_DAC1].channel != NULL &&
es->ch[ES_DAC2].channel != NULL) {
/* XXX: an user should be able to set this with a control tool,
if not done before 7.0-RELEASE, this needs to be converted
to a device specific sysctl "dev.pcm.X.yyy" via
device_get_sysctl_*() as discussed on multimedia@ in msg-id
<861wujij2q.fsf@xps.des.no> */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "single_pcm_mixer",
CTLTYPE_INT | CTLFLAG_RW, dev, sizeof(dev),
sysctl_es137x_single_pcm_mixer, "I",
"Single PCM mixer controller for both DAC1/DAC2");
}
}
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
"latency_timer", &r) == 0 && !(r < 0 || r > 255))
pci_write_config(dev, PCIR_LATTIMER, r, 1);
/* XXX: this needs to be converted to a device specific sysctl
"dev.pcm.X.yyy" via device_get_sysctl_*() as discussed on
multimedia@ in msg-id <861wujij2q.fsf@xps.des.no> */
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"latency_timer", CTLTYPE_INT | CTLFLAG_RW, dev, sizeof(dev),
sysctl_es137x_latency_timer, "I",
"PCI Latency Timer configuration");
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"polling", CTLTYPE_INT | CTLFLAG_RW, dev, sizeof(dev),
sysctl_es_polling, "I",
"Enable polling mode");
#endif /* SND_DYNSYSCTL */
}
static int
es_pci_attach(device_t dev)
{
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
uint32_t data;
struct es_info *es = NULL;
int mapped, i, numplay, dac_cfg;
char status[SND_STATUSLEN];
struct ac97_info *codec = NULL;
kobj_class_t ct = NULL;
uint32_t devid;
es = malloc(sizeof *es, M_DEVBUF, M_WAITOK | M_ZERO);
Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it.
2007-03-15 16:41:27 +00:00
es->lock = snd_mtxcreate(device_get_nameunit(dev), "snd_es137x softc");
es->dev = dev;
es->escfg = 0;
mapped = 0;
pci_enable_busmaster(dev);
data = pci_read_config(dev, PCIR_COMMAND, 2);
data |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN);
pci_write_config(dev, PCIR_COMMAND, data, 2);
data = pci_read_config(dev, PCIR_COMMAND, 2);
if (mapped == 0 && (data & PCIM_CMD_MEMEN)) {
es->regid = MEM_MAP_REG;
es->regtype = SYS_RES_MEMORY;
es->reg = bus_alloc_resource_any(dev, es->regtype, &es->regid,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
RF_ACTIVE);
if (es->reg)
mapped++;
}
if (mapped == 0 && (data & PCIM_CMD_PORTEN)) {
es->regid = PCIR_BAR(0);
es->regtype = SYS_RES_IOPORT;
es->reg = bus_alloc_resource_any(dev, es->regtype, &es->regid,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
RF_ACTIVE);
if (es->reg)
mapped++;
}
if (mapped == 0) {
device_printf(dev, "unable to map register space\n");
goto bad;
}
1999-12-19 17:51:32 +00:00
es->st = rman_get_bustag(es->reg);
es->sh = rman_get_bushandle(es->reg);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
callout_init(&es->poll_timer, CALLOUT_MPSAFE);
es->poll_ticks = 1;
2001-10-08 05:59:54 +00:00
if (resource_int_value(device_get_name(dev),
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
device_get_unit(dev), "polling", &i) == 0 && i != 0)
es->polling = 1;
else
es->polling = 0;
es->bufsz = pcm_getbuffersize(dev, 4096, ES_DEFAULT_BUFSZ, 65536);
if (resource_int_value(device_get_name(dev),
device_get_unit(dev), "blocksize", &i) == 0 && i > 0) {
i &= ES_BLK_ALIGN;
if (i < ES_BLK_MIN)
i = ES_BLK_MIN;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
es->blkcnt = es->bufsz / i;
i = 0;
while (es->blkcnt >> i)
i++;
es->blkcnt = 1 << (i - 1);
if (es->blkcnt < ES_DMA_SEGS_MIN)
es->blkcnt = ES_DMA_SEGS_MIN;
else if (es->blkcnt > ES_DMA_SEGS_MAX)
es->blkcnt = ES_DMA_SEGS_MAX;
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
} else
es->blkcnt = 2;
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
"dac", &dac_cfg) == 0) {
if (dac_cfg < 0 || dac_cfg > 3)
dac_cfg = ES_DEFAULT_DAC_CFG;
} else
dac_cfg = ES_DEFAULT_DAC_CFG;
switch (dac_cfg) {
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
case 0: /* Enable all DAC: DAC1, DAC2 */
numplay = 2;
es->escfg = ES_SET_DAC_FIRST(es->escfg, ES_DAC1);
es->escfg = ES_SET_DAC_SECOND(es->escfg, ES_DAC2);
break;
case 1: /* Only DAC1 */
numplay = 1;
es->escfg = ES_SET_DAC_FIRST(es->escfg, ES_DAC1);
break;
case 3: /* Enable all DAC / swap position: DAC2, DAC1 */
numplay = 2;
es->escfg = ES_SET_DAC_FIRST(es->escfg, ES_DAC2);
es->escfg = ES_SET_DAC_SECOND(es->escfg, ES_DAC1);
break;
case 2: /* Only DAC2 */
default:
numplay = 1;
es->escfg = ES_SET_DAC_FIRST(es->escfg, ES_DAC2);
break;
}
es->escfg = ES_SET_NUMPLAY(es->escfg, numplay);
es->escfg = ES_SET_NUMREC(es->escfg, 1);
devid = pci_get_devid(dev);
switch (devid) {
case ES1371_PCI_ID:
case ES1371_PCI_ID2:
case CT5880_PCI_ID:
case CT4730_PCI_ID:
es1371_init(es);
codec = AC97_CREATE(dev, es, es1371_ac97);
if (codec == NULL)
goto bad;
1999-12-19 17:51:32 +00:00
/* our init routine does everything for us */
/* set to NULL; flag mixer_init not to run the ac97_init */
/* ac97_mixer.init = NULL; */
if (mixer_init(dev, ac97_getmixerclass(), codec))
goto bad;
ct = &eschan1371_class;
break;
case ES1370_PCI_ID:
es1370_init(es);
/*
* Disable fixed rate operation if DAC2 disabled.
* This is a special case for es1370 only, where the
* speed of both ADC and DAC2 locked together.
*/
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (!ES_DAC2_ENABLED(es->escfg))
es->escfg = ES_SET_FIXED_RATE(es->escfg, 0);
if (mixer_init(dev, &es1370_mixer_class, es))
1999-12-19 17:51:32 +00:00
goto bad;
ct = &eschan1370_class;
break;
default:
goto bad;
/* NOTREACHED */
}
es->irqid = 0;
es->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &es->irqid,
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
RF_ACTIVE | RF_SHAREABLE);
if (!es->irq || snd_setup_intr(dev, es->irq, INTR_MPSAFE, es_intr,
es, &es->ih)) {
device_printf(dev, "unable to map interrupt\n");
goto bad;
}
if (bus_dma_tag_create(/*parent*/bus_get_dma_tag(dev),
/*alignment*/2, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
2001-10-08 05:59:54 +00:00
/*maxsize*/es->bufsz, /*nsegments*/1, /*maxsegz*/0x3ffff,
/*flags*/0, /*lockfunc*/NULL,
/*lockarg*/NULL, &es->parent_dmat) != 0) {
device_printf(dev, "unable to create dma tag\n");
goto bad;
}
snprintf(status, SND_STATUSLEN, "at %s 0x%lx irq %ld %s",
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
(es->regtype == SYS_RES_IOPORT)? "io" : "memory",
rman_get_start(es->reg), rman_get_start(es->irq),
PCM_KLDSTRING(snd_es137x));
if (pcm_register(dev, es, numplay, 1))
goto bad;
for (i = 0; i < numplay; i++)
pcm_addchan(dev, PCMDIR_PLAY, ct, es);
1999-12-19 17:51:32 +00:00
pcm_addchan(dev, PCMDIR_REC, ct, es);
es_init_sysctls(dev);
pcm_setstatus(dev, status);
es->escfg = ES_SET_GP(es->escfg, 0);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (numplay == 1)
device_printf(dev, "<Playback: DAC%d / Record: ADC>\n",
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ES_DAC_FIRST(es->escfg) + 1);
else if (numplay == 2)
device_printf(dev, "<Playback: DAC%d,DAC%d / Record: ADC>\n",
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
ES_DAC_FIRST(es->escfg) + 1, ES_DAC_SECOND(es->escfg) + 1);
return (0);
bad:
if (es->parent_dmat)
bus_dma_tag_destroy(es->parent_dmat);
if (es->ih)
bus_teardown_intr(dev, es->irq, es->ih);
if (es->irq)
bus_release_resource(dev, SYS_RES_IRQ, es->irqid, es->irq);
if (codec)
ac97_destroy(codec);
if (es->reg)
bus_release_resource(dev, es->regtype, es->regid, es->reg);
if (es->lock)
snd_mtxfree(es->lock);
if (es)
free(es, M_DEVBUF);
return (ENXIO);
}
static int
es_pci_detach(device_t dev)
{
int r;
struct es_info *es;
r = pcm_unregister(dev);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
if (r)
return (r);
es = pcm_getdevinfo(dev);
if (es != NULL && es->num != 0) {
ES_LOCK(es);
es->polling = 0;
callout_stop(&es->poll_timer);
ES_UNLOCK(es);
callout_drain(&es->poll_timer);
}
bus_teardown_intr(dev, es->irq, es->ih);
bus_release_resource(dev, SYS_RES_IRQ, es->irqid, es->irq);
bus_release_resource(dev, es->regtype, es->regid, es->reg);
bus_dma_tag_destroy(es->parent_dmat);
snd_mtxfree(es->lock);
free(es, M_DEVBUF);
Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes in every sense. General ------- - Multichannel safe, endian safe, format safe * Large part of critical pcm filters such as vchan.c, feeder_rate.c, feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that using them does not cause the pcm data to be converted to 16bit little endian. * Macrosses for accessing pcm data safely are defined within sound.h in the form of PCM_READ_* / PCM_WRITE_* * Currently, most of them are probably limited for mono/stereo handling, but the future addition of true multichannel will be much easier. - Low latency operation * Well, this require lot more works to do not just within sound driver, but we're heading towards right direction. Buffer/block sizing within channel.c is rewritten to calculate precise allocation for various combination of sample/data/rate size. As a result, applying correct SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar to what commercial 4front driver do. * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not result long delay. * Eliminate sound truncation if the sound data is too small. DIY: 1) Download / extract http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz 2) Do a comparison between "cat state*.au > /dev/dsp" and "for x in state*.au ; do cat $x > /dev/dsp ; done" - there should be no "perceivable" differences. Double close for PR kern/31445. CAVEAT: Low latency come with (unbearable) price especially for poorly written applications. Applications that trying to act smarter by requesting (wrong) blocksize/blockcount will suffer the most. Fixup samples/patches can be found at: http://people.freebsd.org/~ariff/ports/ - Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42) due to closer compatibility with 4front driver. Discussed with: marcus@ (long time ago?) - All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been moved to their own dev sysctl nodes, notably: hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans Bump __FreeBSD_version. Driver specific --------------- - Ditto for sysctls. - snd_atiixp, snd_es137x, snd_via8233, snd_hda * Numerous cleanups and fixes. * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme. This was intended for pure debugging and latency measurement, but proven good enough in few unexpected and rare cases (such as problematic shared IRQ with GIANT devices - USB). Polling can be enabled/disabled through dev.pcm.0.polling. Disabled by default. - snd_ich * Fix possible overflow during speed calibration. Delay final initialization (pcm_setstatus) after calibration finished. PR: kern/100169 Tested by: Kevin Overman <oberman@es.net> * Inverted EAPD for few Nec VersaPro. PR: kern/104715 Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp> Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman, those at #freebsd-azalia @ freenode and others for testing. Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
return (0);
}
static device_method_t es_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, es_pci_probe),
DEVMETHOD(device_attach, es_pci_attach),
DEVMETHOD(device_detach, es_pci_detach),
{ 0, 0 }
};
static driver_t es_driver = {
"pcm",
es_methods,
PCM_SOFTC_SIZE,
};
DRIVER_MODULE(snd_es137x, pci, es_driver, pcm_devclass, 0, 0);
MODULE_DEPEND(snd_es137x, sound, SOUND_MINVER, SOUND_PREFVER, SOUND_MAXVER);
MODULE_VERSION(snd_es137x, 1);