freebsd-skq/usr.sbin/ypserv/Makefile.yp

525 lines
16 KiB
Makefile
Raw Normal View History

#
# Makefile for the NIS databases
#
# $FreeBSD$
#
# This Makefile should only be run on the NIS master server of a domain.
# All updated maps will be pushed to all NIS slave servers listed in the
# /var/yp/ypservers file. Please make sure that the hostnames of all
# NIS servers in your domain are listed in /var/yp/ypservers.
#
# This Makefile can be modified to support more NIS maps if desired.
#
# If this machine is an NIS master, comment out this next line so
# that changes to the NIS maps can be propagated to the slave servers.
# (By default we assume that we are only serving a small domain with
# only one server.)
#
NOPUSH = "True"
# If you want to use a FreeBSD NIS server to serve non-FreeBSD clients
# (i.e. clients who expect the password field in the passwd maps to be
# valid) then uncomment this line. This will cause $YPDIR/passwd to
# be generated with valid password fields. This is insecure: FreeBSD
# normally only serves the master.passwd maps (which have real encrypted
# passwords in them) to the superuser on other FreeBSD machines, but
# non-FreeBSD clients (e.g. SunOS, Solaris (without NIS+), IRIX, HP-UX,
# etc...) will only work properly in 'unsecure' mode.
#
#UNSECURE = "True"
# The following line encodes the YP_INTERDOMAIN key into the hosts.byname
# and hosts.byaddr maps so that ypserv(8) will do DNS lookups to resolve
# hosts not in the current domain. Commenting this line out will disable
# the DNS lookups.
B=-b
# Normally, the master.passwd.* maps are guarded against access from
# non-privileged users. By commenting out the following line, the YP_SECURE
# key will be removed from these maps, allowing anyone to access them.
S=-s
# These are commands which this Makefile needs to properly rebuild the
# NIS databases. Don't change these unless you have a good reason. Also
# be sure not to place an @ in front of /usr/bin/awk: it isn't necessary
# and it'll break everything in sight.
#
AWK = /usr/bin/awk
RM = @/bin/rm -f
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
MV = @/bin/mv -f
RCAT = /bin/cat
CAT = @$(RCAT)
MKDB = /usr/sbin/yp_mkdb
DBLOAD = $(MKDB) -m `hostname`
MKNETID = /usr/libexec/mknetid
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
NEWALIASES = /usr/bin/newaliases
YPPUSH = /usr/sbin/yppush
.if !defined(UPDATE_DOMAIN)
DOMAIN = `/bin/domainname`
.else
DOMAIN = $(UPDATE_DOMAIN)
.endif
REVNETGROUP = /usr/libexec/revnetgroup
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
NFILE = /tmp/ypmake
TMP = `$(RCAT) $(NFILE)`
# It is advisable to create a separate directory to contain the
# source files used to generate your NIS maps. If you intend to
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
# support multiple domains, something like /src/dir/$DOMAIN
# would work well.
YPSRCDIR = /etc
YPDIR = /var/yp
YPMAPDIR = $(YPDIR)/$(DOMAIN)
# These are the files from which the NIS databases are built. You may edit
# these to taste in the event that you wish to keep your NIS source files
# seperate from your NIS server's actual configuration files. Note that the
# NIS passwd and master.passwd files are stored in /var/yp: the server's
# real password database is not used by default. However, you may use
# the real /etc/passwd and /etc/master.passwd files by:
#
#
# - invoking yppasswdd without the -m option (yppasswdd will use
# /etc/master.passwd if no alternate master.passwd file is specified
# and do a 'pwd_mkdb' as needed).
# - Specifying the location of the master.passwd file using the
# MASTER_PASSWD variable, i.e.:
#
# # make MASTER_PASSWD=/path/to/some/other/master.passwd
#
# - (optionally): editing this Makefile to change the default location.
#
# To add a user, edit $(YPDIR)/master.passwd and type 'make'. The raw
# passwd file will be generated from the master.passwd file automagically.
#
ETHERS = $(YPSRCDIR)/ethers # ethernet addresses (for rarpd)
BOOTPARAMS= $(YPSRCDIR)/bootparams # for booting Sun boxes (bootparamd)
HOSTS = $(YPSRCDIR)/hosts
NETWORKS = $(YPSRCDIR)/networks
PROTOCOLS = $(YPSRCDIR)/protocols
RPC = $(YPSRCDIR)/rpc
SERVICES = $(YPSRCDIR)/services
GROUP = $(YPSRCDIR)/group
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
ALIASES = $(YPSRCDIR)/aliases
NETGROUP = $(YPDIR)/netgroup
PASSWD = $(YPDIR)/passwd
.if !defined(MASTER_PASSWD)
MASTER = $(YPDIR)/master.passwd
.else
MASTER = $(MASTER_PASSWD)
.endif
YPSERVERS = $(YPDIR)/ypservers # List of all NIS servers for a domain
PUBLICKEY = $(YPSRCDIR)/publickey
NETID = $(YPSRCDIR)/netid
AMDHOST = $(YPSRCDIR)/amd.host
target:
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(RM) $(NFILE)
@if [ ! -d $(DOMAIN) ]; then mkdir $(DOMAIN); fi; \
cd $(DOMAIN) ; echo "NIS Map update started on `date` for domain $(DOMAIN)" ; \
make -f ../Makefile all; echo "NIS Map update completed."
# If you don't want some of these maps built, feel free to comment
# them out from this list.
# Note that we don't build the ethers or boorparams maps by default
# since /etc/ethers and /etc/bootparams are not likely to be present
# on all systems.
#
all: servers master.passwd passwd hosts group networks protocols rpc \
services netid
# aliases publickey netgrp ethers bootparam amd.host
ethers: ethers.byname ethers.byaddr
bootparam: bootparams
hosts: hosts.byname hosts.byaddr
networks: networks.byaddr networks.byname
protocols: protocols.bynumber protocols.byname
rpc: rpc.byname rpc.bynumber
services: services.byname
passwd: passwd.byname passwd.byuid
group: group.byname group.bygid
netgrp: netgroup
netid: netid.byname
servers: ypservers
publickey: publickey.byname
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
aliases: mail.aliases
master.passwd: master.passwd.byname master.passwd.byuid
#
# This is a special target used only when doing in-place updates with
# rpc.yppasswdd. In this case, the maps will be updated by the rpc.yppasswdd
# server and won't need to be remade. They will have to be pushed to the
# slaves however. Calling this target implicitly insures that this will
# happen.
#
pushpw:
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) master.passwd.byname ; fi
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) master.passwd.byuid ; fi
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) passwd.byname ; fi
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) passwd.byuid ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
mail.aliases: $(ALIASES)
@echo "Updating $@..."
@echo $@.$$$$ > $(NFILE)
@$(NEWALIASES) -oA$(ALIASES)
1996-08-09 17:55:18 +00:00
@$(MKDB) -u $(ALIASES).db \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(ALIASES) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
ypservers: $(YPSERVERS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(YPSERVERS) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#") print $$0"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(YPSERVERS) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
ethers.byname: $(ETHERS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(ETHERS) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#" && $$1 != "+") \
print $$2"\t"$$0 }' $^ | $(DBLOAD) -i $(ETHERS) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
ethers.byaddr: $(ETHERS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(ETHERS) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#" && $$1 != "+") \
print $$1"\t"$$0 }' $^ | $(DBLOAD) -i $(ETHERS) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
bootparams: $(BOOTPARAMS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(BOOTPARAMS) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#" && $$1 != "+") \
print $$0 }' $^ | $(DBLOAD) -i $(BOOTPARAMS) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
netgroup: $(NETGROUP) netgroup.byhost netgroup.byuser
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(NETGROUP) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#" && $$1 != "+") \
print $$0 }' $^ | $(DBLOAD) -i $(NETGROUP) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
netgroup.byhost: $(NETGROUP)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(NETGROUP) | $(REVNETGROUP) -h -f $(NETGROUP) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#" && $$1 != "+") \
print $$0 }' $^ | $(DBLOAD) -i $(NETGROUP) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
netgroup.byuser: $(NETGROUP)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(NETGROUP) | $(REVNETGROUP) -u -f $(NETGROUP) | \
$(AWK) '{ if ($$1 != "" && $$1 != "#" && $$1 != "+") \
print $$0 }' $^ | $(DBLOAD) -i $(NETGROUP) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
hosts.byname: $(HOSTS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(HOSTS) | \
$(AWK) '/^[0-9]/ { for (n=2; n<=NF && $$n !~ "#"; n++) \
print $$n"\t"$$0 }' $^ | $(DBLOAD) ${B} -i $(HOSTS) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
hosts.byaddr: $(HOSTS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(HOSTS) | \
$(AWK) '$$1 !~ "#" { print $$1"\t"$$0 }' $^ \
| $(DBLOAD) ${B} -i $(HOSTS) -o $(YPMAPDIR)/$@ - $(TMP)
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
networks.byname: $(NETWORKS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(NETWORKS) | \
$(AWK) \
'$$1 !~ "#" { print $$1"\t"$$0; \
for (n=3; n<=NF && $$n !~ "#"; n++) \
print $$n"\t"$$0 \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
}' $^ | $(DBLOAD) -i $(NETWORKS) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
networks.byaddr: $(NETWORKS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(NETWORKS) | \
$(AWK) '$$1 !~ "#" { print $$2"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(NETWORKS) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
protocols.byname: $(PROTOCOLS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(PROTOCOLS) | \
$(AWK) \
'$$1 !~ "#" { print $$1"\t"$$0; \
for (n=3; n<=NF && $$n !~ "#"; n++) \
print $$n"\t"$$0 \
}' $^ | $(DBLOAD) -i $(PROTOCOLS) \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
-o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
protocols.bynumber: $(PROTOCOLS)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(PROTOCOLS) | \
$(AWK) '$$1 !~ "#" { print $$2"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(PROTOCOLS) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
rpc.byname: $(RPC)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(RPC) | \
$(AWK) \
'$$1 !~ "#" { print $$1"\t"$$0; \
for (n=3; n<=NF && $$n !~ "#"; n++) \
print $$n"\t"$$0 \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
}' $^ | $(DBLOAD) -i $(RPC) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
rpc.bynumber: $(RPC)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(RPC) | \
$(AWK) '$$1 !~ "#" { print $$2"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(RPC) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
services.byname: $(SERVICES)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(SERVICES) | \
$(AWK) \
'$$1 !~ "#" { for (n=1; n<=NF && $$n !~ "#"; n++) { \
if (index($$2,"udp")) { printf("%s/udp",$$n) } \
else { printf("%s/tcp",$$n) }; print "\t"$$0 ; \
if (n == 1) n = 2; \
} ; print $$2"\t"$$0 ; \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
}' $^ | $(DBLOAD) -i $(SERVICES) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
publickey.byname: $(PUBLICKEY)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(PUBLICKEY) | \
$(AWK) '$$1 !~ "#" { print $$1"\t"$$2 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(PUBLICKEY) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
$(PASSWD): $(MASTER)
@echo "Creating new $@ file from $(MASTER)..."
@if [ ! $(UNSECURE) ]; then \
$(RCAT) $(MASTER) | \
$(AWK) -F: '{if ($$1 != "+") \
print $$1":*:"$$3":"$$4":"$$8":"$$9":"$$10}' $^ \
> $(PASSWD) ; \
else $(RCAT) $(MASTER) | \
$(AWK) -F: '{if ($$1 != "+") \
print $$1":"$$2":"$$3":"$$4":"$$8":"$$9":"$$10}' $^ \
> $(PASSWD) ; fi
passwd.byname: $(PASSWD)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(PASSWD) | \
$(AWK) -F: '{ if ($$1 != "+") print $$1"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(PASSWD) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
passwd.byuid: $(PASSWD)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(PASSWD) | \
$(AWK) -F: '{ if ($$1 != "+") print $$3"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(PASSWD) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
group.byname: $(GROUP)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(GROUP) | \
$(AWK) -F: '{ if ($$1 != "+") print $$1"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(GROUP) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
group.bygid: $(GROUP)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(GROUP) | \
$(AWK) -F: '{ if ($$1 != "+") print $$3"\t"$$0 }' $^ \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
| $(DBLOAD) -i $(GROUP) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
netid.byname: $(GROUP) $(PASSWD)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
@$(MKNETID) -q -p $(PASSWD) -g $(GROUP) -h $(HOSTS) -n $(NETID) \
-d $(DOMAIN) | $(DBLOAD) -o $(YPMAPDIR)/$@ - $(TMP)
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
master.passwd.byname: $(MASTER)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(MASTER) | \
$(AWK) -F: '{ if ($$1 != "+") print $$1"\t"$$0 }' $^ \
| $(DBLOAD) ${S} -i $(MASTER) -o $(YPMAPDIR)/$@ - $(TMP)
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
master.passwd.byuid: $(MASTER)
@echo "Updating $@..."
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@echo $@.$$$$ > $(NFILE)
$(CAT) $(MASTER) | \
$(AWK) -F: '{ if ($$1 != "+") print $$3"\t"$$0 }' $^ \
| $(DBLOAD) ${S} -i $(MASTER) -o $(YPMAPDIR)/$@ - $(TMP)
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
amd.host: $(AMDHOST)
@echo "Updating $@..."
@echo $@.$$$$ > $(NFILE)
$(CAT) $(AMDHOST) | \
$(AWK) '$$1 !~ "#" { \
for (i = 1; i <= NF; i++) \
if (i == NF) { \
if (substr($$i, length($$i), 1) == "\\") \
printf("%s", substr($$i, 1, length($$i) - 1)); \
else \
printf("%s\n", $$i); \
} \
else \
printf("%s ", $$i); \
}' | \
$(DBLOAD) -i $(AMDHOST) -o $(YPMAPDIR)/$@ - $(TMP)
@$(MV) $(TMP) $@
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi